Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 203/444 | < Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• How do I check to see if an apt lock file is locked?

  - by gondoi

  I am writing a script to do some apt commands, but I am running into potential issues of the apt/dpkg databases being locked so my script bails. I want to check the lock files (i.e. /var/lib/dpkg/lock) before doing anything just like apt does when it runs it's command, but I can't figure out how apt is performing the lock. The lock file is always there, and apt-get is not doing a flock on the file. How else would it be checking to see if it is in use? From an strace I see that apt-get opens the file, but that is it. In my script, I can open the file while apt-get has it open as well.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• Flash Media Server slow over SSL

  - by Antilogic

  We are using FMS to host a VoD site. We host FMS internally (we do not use a CDN). We recently installed an SSL certificate to alleviate connection issues for clients (they're networks either block or don't support RTMP), however we're noticing that when streaming in RTMPS connections are drastically slower (on the order of Mbps). I know SSL causes some amount of over head but both client and server show almost no signs of exertion. Speedtest.net and a locally hosted speed test confirm that bandwidth is not an issue. I'm really not a network guru, so I'm at a loss as to where to check next. Do any of you have an idea why streaming media would run so slow over SSL?

  Read the article

• Maximum burn speed keeps decreasing from Nero?

  - by Bob King

  I have a 16x DL DVD burner in my work machine (XP SP3). I'm using 8x TDK DVD+R media. The first dozen or so disks burned fine using Nero, but after that I started to coaster every disk. I asked Nero to calculate the maximum speed, and it calculated it at 4x. This worked for a few disks, then the same issues. I'm currently burning at 1.2x. I've since tried other brands and full 16x compatible disks, I can't get my burn speed to be recognized as any faster than what it's currently at. I've tried uninstalling Nero. I've tried burning directly in Windows, and also tested an MP3 CD in iTunes, and no luck. Any suggestions, short of reinstalling Windows, would be great!

  Read the article

• IE8 Unable to download files

  - by jetgunner

  I recently installed Windows 7. I can browse to any webpage using IE8, but if I click on any links to download files, I receive the following error: Unable to download [filename] from [website]. Unable to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later. I can download files perfectly fine using firefox, it's just IE that is having issues. There are no messages in the windows event log. I have no add-ins installed and have made no security changes as this is a fresh install. Any ideas?

  Read the article

• Leave Windows Session Logged On

  - by Kyle Brandt

  Is a bad idea for any reason to leave accounts logged onto Windows remote desktop sessions? So instead of logging off, just closing the session so it locks. In this case, the limited number of remote desktop connections is not an issue. I am just wondering if anyone has seen sessions leak memory over time or maybe security issues with doing this, etc... I could see if programs were left open they might suck up and or leak memory, but has anyone seen this with Microsoft software such as Control Panels, Management Consoles, and Exchange System Administrator?

  Read the article

• In 2011, what are the reasons to stick with plain text mails?

  - by Aaron Digulla

  People entering college today have never known a world without an Internet. HTML was invented 1980, that's more than thirty years ago or 1.5 generations. But plain text mails are still common despite all their problems: Encoding issues Wrapped code segments No links No way to use the "a picture says more than a thousand words" lore Most of the security risks are now handled by the underlying browser engine and smart settings like: Don't allow JavaScript in mails Don't execute attachments Don't download external resources (like web bugs) On top of that, only very few people still read mail only in command line tools like Mutt. Knowing Mutt myself, I'm pretty sure you can configure it to display HTML mail with, say, w3m. On top of that, most HTML mail capable clients send two versions of the mail (pure text with an HTML attachment). I'm not sure if there are any people left on the planet which still use a 56kbit modem to access their mail accounts. So what reasons are left to stick with plain text mails in 2011?

  Read the article

• reinstalling vista product key

  - by Arabella

  I recently formatted my laptop which came with Vista preinstalled and installed Windows 7 on the primary partition. I've now installed Vista on a different partition, but it won't activate my valid product key. I've looked around on here and have seen similar issues being raised, but I don't have the telephonic activation option (only option I have is online activation). I am located in South Africa. When I enter my product key from my sticker it says it is not valid, so I must either try to activate online again or buy a different product key. I have reinstalled Vista on the primary partition several times and activated the key without a problem. This is the first time I am installing it on a different partition.

  Read the article

• How to analyze a wifi network with many devices

  - by Caveatrob

  My friend has a wifi network with an x-box, a wii, a playstation, and two nintendo portables. She's also got 2-3 PC's and a network printer. She's got a wifi repeater as well. She claims that she didn't have any issues for months with everything working together, and suddenly everything stopped disconnecting. I haven't been over there yet - wanted to figure out the best way to diagnose the thing. I asked her to send me the stats on the booster and the modem, etc: The booster is Netgear serial #2ac2195506b95 The modem is Cisco Linksys e1500 #10910c12129103 We have a sprint router thru centurylink and they said it is working fine 660 series

  Read the article

• Explorer image thumbnails are grey/incomplete/partial

  - by Craig620

  I have recently noticed a problem on my Win7 x64 Home machine. When navigating the pictures library, I run across a fair amount of thumbnails that are grey and only partially rendered. This is not not the absence of thumbnails caused by "always show icons, never thumbnails" checkbox, and is a local drive, have seen many other posts for those issues... I've run cleanmgr for thumbnails, and also manually deleted the .db files from %LOCALAPPADAT%\Microsoft\Windows\Explorer. That did actually fix one thumbnail once (while preparing this post) but in general it doesn't work. Why do specialized imaging programs not have this problem, but Explorer does? How do you fix Explorer? It's very annoying!

  Read the article

• Setting up IIS7 to mimic a GoDaddy shared hosting plan

  - by NerdFury

  I host multiple domains on a GoDaddy shared hosting account. I would like to setup a website locally in IIS 7 that mimics the setup of my hosted account so that I can test and debug applications locally before deploying, as debugging after deploying, or discovering there are issues after deploying is frustrating. I have created a folder WebRoot, at put my main application in that folder. I created a website in IIS 7 and pointed it at that folder. I setup bindings with a fake domain, and created a matching entry in my hosts file to make the fake domain point at my 127.0.0.1. I then created a folder www.otherdomain.com under webroot. I then created an application underneath my website, and pointed it at this folder. I can't find how I can add bindings to the web application to have it referenced as a different fake domain, rather than a subdirectory under my root domain. What would be the proper way to setup IIS to best simulate the environment on the GoDaddy servers.

  Read the article

• How can browsers in VMs resolve hostnames of websites on parent PC?

  - by elliot100

  I have a number of local websites in development on my Windows PC, set up as virtual hosts within Apache, with hostnames (along the lines of dev.example.com) resolved via the hosts file, so I can test them out them with various browsers. I now want to extend browser testing to running browsers in various OSs in virtual machines, and want to be able to resolve dev.example.com from the VMs. Currently these are a mix of VMWare Server and VirtualPC. I know I can edit the hosts file on any Windows VMs, but this is a bit fiddly and I'd like a solution which is independent of the individual VMs. I think what I need is a nameserver, but what's the simplest way of going about this? I'd like everything to be self-contained on the one machine. I think I can cover firewall and Apache permissioning issues.

  Read the article

• Windows RRAS multi-network routing

  - by Brent Pabst

  I am looking for advice, comments and suggestions from anyone who has used Windows RRAS (2008 R2 Pref.) as the primary routers for our multiple offices. We have multiple physical office locations and are looking into utilizing Windows Server 2008 R2 Core as redundant Active/Active routers/gateways for our network as opposed to a physical router from Cisco or Juniper, it costs a lot less! Any problems, issues or documentation anyone would recommend? We will still most likely have a firewall on the edge but the majority of our traffic will be inter-office with some external services. We will be using multiple Class B networks across our two offices.

  Read the article

• WSUS Showing Incorrect Version & Client Update Failure but they can check-in

  - by user132199

  One of the issues we are having is the clients will not download the updates from our WSUS server. They check-in as they are suppose too and find applicable updates but they are unable to actually download and install them. The GPO is set correctly. We decided to install the patch KB2720211to see if it would help eleviate this issue but it did not. In fact, even stranger, if I check the version that is installed on WSUS it reads 3.2.7600.226 but as far as I know it should read 3.2.7600.251. If I check Add/Remove programs to see what Windows Updates have been installed it even lists for WSUS that KB2720211 has been installed at version 3.2.7600.251. To install this update I followed the following directions Question: Has anyone seen this issue where the patch is installed yet not showing the correct version? What can I try to get my clients to update?

  Read the article

• Making my SVN Public

  - by azz0r

  Hello, I'm looking todo an SVN checkout on a server so I need to make my local SVN public. I looked into GITHUB, but I'm not willing to pay or let the world see my project. Are there any alternates? Okay so I went through this tutorial: http://www.petri.co.il/setup-ssh-server-vista.htm Had some issues, so I did this: mail-archive.com/[email protected]/msg84875.html Now I'm wondering how let the SSH access my SVN repo found in c:/wamp/svnRepo. Any tutorials or advice (please no: go read this book crap) greatly welcome!

  Read the article

• Azure VM : Connection refused by host

  - by Simon Kérouack

  I recently stopped a subscription with 14 VMs in it and restarted it a few days later. Now all my VMs are working just fine at the exception of 6 used for MongoDB. They respond to ping and so they show as online in the azure dashboard but they do not answer to anything else. I tried (from different locations, in and out of the azure cloud) ssh : connect to host * port *: Connection refused telnet : Unable to connect to remote host: Connection refused mongo : exception: connect failed The ports for ssh and mongo are opened in azure. I tried restarting the VMs a few times trough the azure dashboard, they seem to restart successfully but still refuse all connections. I already looked for similar issues and the best solutions I found was to wait... the issue has been happening for 7 days and waiting is no more an option.

  Read the article

• Terminal Server 2003 Gaining Time when Windows 7 Client Connects

  - by Matthew

  A Windows 2003 Terminal Server keeps time perfectly until a Windows 7 Home client connects. Then it gains time at a rate of several seconds per minute. The client connects through a firewall with only the RDP port open. The client runs the same apps on the terminal server that XP clients run with no issues. Using the Microsoft Terminal Server Client application copied to the W7 computer from an XPsp3 computer gives the same results. Current workaround is to sync time every 5 minutes. Any better ideas?

  Read the article

• Is it possible to sync specific router settings across multiple routers?

  - by Betard Fooser

  I recently purchased a second Linksys wireless routers set up on the other side of my home and I am wondering if it is possible to somehow sync particular settings between the two? For instance what I am really after is the "MAC Filter List". I would "like" to be able to maintain the list on both routers without having to manually type in the field values. maybe this isn't possible, or has an easy answer, but hopefully those of you who know will cut me a bit of slack. I tried to "google" the answer to this of course, but it seems any searches with the words "sync" and "router" and/or "wifi" result in pages of people having issues with synching their iOS devices over wifi. I would say that have decent amount of networking knowledge in regards to average home networks, and I imagine in larger businesses / corporations they must have a "simpler" way of maintaining things like this. Any insight to point me in the right direction will be much appreciated.

  Read the article

• Amazon Linux AMI release 2010.11.1 corresponds to which RHEL version (4/5/6)?

  - by Jayesh

  I am using the default Amazon Linux AMI in an EC2 instance - Amazon Linux AMI release 2010.11.1. I can see that it's a Redhat based system, but after trying many tools (/etc/issues, uname -a, lsb_release), I cannot tell which version of RHEL or CentOS is it based on. I need to get some packages that are not available in Amazon's package repos. I have list of custom yum repos that I can use, but since I don't know which RHEL version is the Amazon AMI based on, I cannot choose from different versions of repos. How can I find whether it's running RHEL 4/5/6 (or their CentOS counterparts)?

  Read the article

• Slow Inserts SQL Server 2005

  - by Achilles

  I'm researching an issue with the following information: We had a logging table with about 90k records in it that had inserts taking several seconds(approximately 10 to 20s) in extreme cases. One of the columns of the table stores XML as the XML datatype. The XML isn't being parsed during the insert, just stored. We tried truncating the table assuming that the issue was related the number of records(althought 90k seemed "normal") and the inserts still are performing poorly. While I know there are other issues that can cloud the issue, what would be some "check this first" ideas that could help me debug this issue? Thanks for any suggestions and help in advance.

  Read the article

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• spurious hardware memory 'errors' on hp dl380 g5's being generated

  - by friedchicken

  Hi All, i've got 2 new HP dl380g5 servers running HP's esxi4 patched to 219382. they have both been patched up to the latest hp firmware levels (firmware cd 8.7) both are running 32gb (4 x 8gb sticks) both servers are showing the same symptoms - the memory lights come on for two (random) dimms on the front of the server and the health led turns red. sometimes the server stays up and running with no problems. othertimes the server locks dead and only a power reset can bring it back. there is nothing showing in the ilo logs and nothing within the vmware hardware monitoring. the memory has been replaced i've got other customers that have been running dl380g5's with out any issues on esx3.5 - this is our first vsphere deployment with them. these are meant to go live soon so any advice would be great. thanks in advance.

  Read the article

• Transfered SSL Certificate to Rackspace Cloud Server - Occasional Errors

  - by ngl5000

  Okay, I recently tranfered my Comodo SSL certificate from my previous Bluehost account to my new rackspace cloud server. (LAMP stack) Basically I just copy pasted the server cert and key and checked to make sure it was properly installed which it was. Now I am running into some issues, occasionally I will hear from people that they are getting an 'Untrusted Connection Error' while others are not getting this error at all. Recently someone sent me a screen shot of their error and it said: This Certificate is not trusted because no issuer chain was provided. The browser they noticed this on was safari so I cleared all my history data in safari and opened the site but I am not seeing that error. Does anyone have any idea how to fix something like this? Thanks!

  Read the article

• How much power supply do I need for my server, and could a shortage be causing my odd crashing?

  - by dolan

  I have 5 servers, all with similar hardware (i7, four 2tb 7200rpm drives, two 4tb 5400rpm drives, 430 watt power supply), and lately the machines have been freezing up. This has gotten worse in the last day or so, and I can't pinpoint any explanation. One recent change was adding the two 4tb hard drives. The crashes happen most often while running a large Hadoop job, so I was originally thinking the load was causing some issues, but last night one server just froze without any heavy load on the box (or so I think), other than HDFS (Hadoop's distributed file system) was probably rebalancing itself since two of the five nodes were offline. If I plugin a monitor and keyboard to one of these frozen machines, I can't get any response or feedback on the screen. Any ideas on possible points of failure and/or different logs I can look at to investigate? Thanks Edit: The systems are running Ubuntu 10.04 Edit 2: More on hardware: intel core i7-930 bloomfield 2.8ghz processor (quad core) 12gb (6 x 2gb) kingston ddr3 1333 ram antec earthwatts green 430 power supply msi x58m lga 1366 motherboard

  Read the article

< Previous Page | 199 200 201 202 203 204 205 206 207 208 209 210  | Next Page >