Search Results

Search found 5998 results on 240 pages for 'rise against'.

Page 205/240 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

• Do RAID controllers commonly have SATA drive brand compatibility issues?

  - by Jeff Atwood

  We've struggled with the RAID controller in our database server, a Lenovo ThinkServer RD120. It is a rebranded Adaptec that Lenovo / IBM dubs the ServeRAID 8k. We have patched this ServeRAID 8k up to the very latest and greatest: RAID bios version RAID backplane bios version Windows Server 2008 driver This RAID controller has had multiple critical BIOS updates even in the short 4 month time we've owned it, and the change history is just.. well, scary. We've tried both write-back and write-through strategies on the logical RAID drives. We still get intermittent I/O errors under heavy disk activity. They are not common, but serious when they happen, as they cause SQL Server 2008 I/O timeouts and sometimes failure of SQL connection pools. We were at the end of our rope troubleshooting this problem. Short of hardcore stuff like replacing the entire server, or replacing the RAID hardware, we were getting desperate. When I first got the server, I had a problem where drive bay #6 wasn't recognized. Switching out hard drives to a different brand, strangely, fixed this -- and updating the RAID BIOS (for the first of many times) fixed it permanently, so I was able to use the original "incompatible" drive in bay 6. On a hunch, I began to assume that the Western Digital SATA hard drives I chose were somehow incompatible with the ServeRAID 8k controller. Buying 6 new hard drives was one of the cheaper options on the table, so I went for 6 Hitachi (aka IBM, aka Lenovo) hard drives under the theory that an IBM/Lenovo RAID controller is more likely to work with the drives it's typically sold with. Looks like that hunch paid off -- we've been through three of our heaviest load days (mon,tue,wed) without a single I/O error of any kind. Prior to this we regularly had at least one I/O "event" in this time frame. It sure looks like switching brands of hard drive has fixed our intermittent RAID I/O problems! While I understand that IBM/Lenovo probably tests their RAID controller exclusively with their own brand of hard drives, I'm disturbed that a RAID controller would have such subtle I/O problems with particular brands of hard drives. So my question is, is this sort of SATA drive incompatibility common with RAID controllers? Are there some brands of drives that work better than others, or are "validated" against particular RAID controller? I had sort of assumed that all commodity SATA hard drives were alike and would work reasonably well in any given RAID controller (of sufficient quality).

  Read the article

• Problems migrating an EBS backed instance over AWS Regions

  - by gshankar

  Note: I asked this question on the EC2 forums too but haven't received any love there. Hopefully the ServerFault community will be more awesome. The new AWS Sydney region opening up is something that we've been waiting for for a long time but I'm having a lot of trouble migrating our instances over from N. California. I managed to migrate 1 instance over using CloudyScripts to move a snapshot and then firing up a new instance in the Sydney region. This was a very new instance so both the source and destination were running on a Ubuntu 12.04 LTS server and I had no issues there. However, the rest of our instances are all Ubuntu 10.04 LTS and with these, I'm having a lot of problems. I've tried following: 1- following the AWS whitepaper on moving instances which was given to us at the recent Customer Appreciation Day in Sydney where the new region was launched. The problem with this approach was with the last step (Step 19) here you register the image: ec2-register -s snap-0f62ec3f -n "Wombat" -d "migrated Wombat" --region ap-southeast-2 -a x86_64 --kernel aki-937e2ed6 --block-device-mapping "/dev/sdk=ephemeral0" I keep getting this error: Client.InvalidAMIID.NotFound: The AMI ID 'ami-937e2ed6' does not exist which I think is due to the kernel_id not existing in the Sydney region? 2- Using CloudyScripts to move a snapshot and then creating a new volume and attaching to a new instance in Sydney This results in the instance just hanging on boot and failing the status checks. I can't SSH in or look at the server log I suspect that my issue is with finding the right kernel_id for the volume in the new region. However I can't seem to work out how to go about finding this kernel_id, the ones I've tried (from the original instance) don't result in the Client.InvalidAMIID.NotFound: The AMI ID 'ami-937e2ed6' error and any other kernel_id just won't boot. I've tried both 12.04 and 10.04 versions of Ubuntu. Nothing seems to work, I've been banging my head against a wall for a while now, please help! New (broken) instance i-a1acda9b ami-9b8611a1 aki-31990e0b Source instance i-08a6664e ami-b37e2ef6 aki-937e2ed6 p.s. I also tried following this guide on updating my Ubuntu LTS version to 12.04 before doing the migration but it didn't seem to work either, still getting stuck on updating the kernel_id http://ubuntu-smoser.blogspot.com.au/2010/04/upgrading-ebs-instance.html

  Read the article

• Our VPS is being used as a Warez mule

  - by Mikuso

  The company I work for runs a series of ecommerce stores on a VPS. It's a WAMP stack, 50gb storage. We use an archaic piece of ecommerce software which operates almost entirely client-side. When an order is taken, it writes it to disk and then we schedule a task to download the orders once every 10 minutes. A few days ago, we ran out of disk space, which caused orders to fail to be written. I quickly hopped on to delete some old logs from the mailserver and freed up a couple of GB pretty quickly, but I wondered how we could fill up 50gb will nothing much more than logs. Turns out, we didn't. Hidden deep within the c:\System Volume Information directory, we have a stack of pirated videos, which seem to have appeared (looking at the timestamps) over the past three weeks. Porn, American Sports, Australian cooking shows. A very odd collection. Doesn't look like an individual's personal tastes - more like the VPS is being used as a mule. We have a 5-attempts and you're blocked policy on our FTP server (plus, there is no FTP account with access to that directory), and the windows user account has had it's password changed recently. The main avenues are sealed - and logs can verify that. I thought I'd watch and see if it happened again, and yes, another cooking show has appeared this morning. I am the only one to know of this problem at my company, and only one of two with access to the VPS (the other being my boss, but no - it's not him). So how is this happening? Is there a vulnerability in some of the software on the VPS? Are the VPS owners peddling warez across our rented space? (can they do this?) I don't want to delete the warez in case it is seen as a hostile action against this outside force, and they choose to retaliate. What should I do? How do I troubleshoot this? Has this happened to anyone else before?

  Read the article

• Establishing a web page bookmarking process - looking for ideas to improve

  - by Matt

  Like many others, I have a process for bookmarking web pages to read later. My requirements for web page bookmarking are: Ability to bookmark pages must be available from all (within reason) platforms - PC/browser, mobile device, etc. Bookmarks must be centrally stored (implicit from #2) so that I can read the bookmarks from anywhere/any device Full text of web pages must be stored Bonus features would be: Bookmarks and page content should be full text searchable Maintain an archive indefinitely Distinguish between what's read vs. unread Bookmarked page content is cleaned up, e.g. ads eliminated, unnecessary html removed, pages better formatted for reading My current process (which addresses most of these requirements) is as follows: I set up a Gmail account with 2 labels, "Bookmarks Unread" and "Bookmarks Read" Gmail filters set up such that depending on the form of the address (using Gmail's '+string' functionality in addresses), the incoming bookmark gets labeled appropriately On each of my browsers/devices, I have an address book entry for [email protected] and [email protected]. If I want to clean up the page content, I use the Readability bookmarklet which does a great job of giving me the essential content only Anywhere I have Firefox, I use the Send Page by Email extension which, with 2 clicks, allows me to send the cleaned-up Readability page URL and content to one of the above email addresses. Where I don't have Firefox (e.g. iPhone or other mobile device) I use the native ability to send the current link via email (most/all apps have them, including the browser, RSS readers, NYTimes, etc.). In most cases (unless it's built into the particular app), this won't include the page body. The process is almost perfect. I've got the central access and ubiquitous access of Gmail as the storage mechanism, full text searchability (due to Gmail, but of course only for the URLs I send from that Firefox extension), a cleaned up page due to Readability, ability to read offline (assuming I use an IMAP client against Gmail) and permanent archiving of content, including what's been read vs. unread. The missing pieces are: The Send Page by Email Firefox extension seems to only send X bytes of a web page. Or some portion. So it limits my full text searchability. Where I don't have Firefox, I can only send the link, so no full text search at all in those cases. Instapaper looks like it meets most of my requirements (and bonus items). The only downside to me (personal preference) is that central storage is based on Instapaper vs. something more broad like Gmail, which as a generalized service and with Google behind it pretty much means it's permanent. I'm not too hung up on this, but I would definitely prefer to keep Gmail if possible. An upside of Instapaper is that it does the page clean-up as well as stores the entire page content, unlike my Firefox extension. Thoughts on addressing the gaps and improving this process further?

  Read the article

• Trying to install Rmagick on Debian

  - by Janak

  One of things you need to do to get Rmagick installed apt-get install libmagick9-dev When I try that I get the following errors Reading package lists... Done Building dependency tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: libmagick9-dev: Depends: libjpeg62-dev but it is not going to be installed Depends: libbz2-dev but it is not going to be installed Depends: libtiff4-dev but it is not going to be installed Depends: libwmf-dev (>= 0.2.7-1) but it is not going to be installed Depends: libz-dev Depends: libpng12-dev but it is not going to be installed Depends: libfreetype6-dev but it is not going to be installed Depends: libexif-dev but it is not going to be installed Depends: libdjvulibre-dev but it is not going to be installed Depends: librsvg2-dev but it is not going to be installed Depends: libgraphviz-dev but it is not going to be installed E: Broken packages I don't know what to do to fix this? EDIT 1: I tried sudo apt-get install librmagick-ruby and it worked fine but then I needed to install the fleximage gem gem1.8 install fleximage and I got the following error message Building native extensions. This could take a while... ERROR: Error installing fleximage: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for cc... yes checking for Magick-config... no Can't install RMagick 2.12.2. Can't find Magick-config in /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/var/lib/gems/1.8/bin *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.12.2 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.12.2/ext/RMagick/gem_make.out

  Read the article

• Coldfusion 8 Application Crashes Under Heavy Load

  - by KM01

  Hello, We have a CF8 app that runs for 20-25 minutes before crashing under heavy load ~ 1200 users. This load is generated by our load testing tool: 1200 users ramped up in 5 mins (approx behavior of our users), running for an hour. We have this app on Solaris 10, Apache 2, JRun 4 and Oracle 10g. Java version is 1.6. During the initial load tests, the thread dumps pointed to monitor deadlocks that pointed to sessions. "jrpp-173": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" "scheduler-1": waiting to lock monitor 0x026c3ce0 (object 0x6abe2f20, a coldfusion.monitor.memory.SessionMemoryMonitor$TopMemoryUsedSessions), which is held by "jrpp-167" "jrpp-167": waiting to lock monitor 0x019fdc60 (object 0x6b893530, a java.util.Hashtable), which is held by "scheduler-1" We increased the number of sessions relative to the number of CPUs (48 simultaneous threads against 32 CPUs), and the deadlock went away. While varying the simultaneous threads helped a little bit in terms of response time, the CF server still tanked in 20-25 minutes during all of these tests. We ran more thread dumps, and saw a thread locking a monitor, for e.g.: "jrpp-475" prio=3 tid=0x02230800 nid=0x2c5 runnable [0x4397d000] java.lang.Thread.State: RUNNABLE at java.util.HashMap.getEntry(HashMap.java:347) at java.util.HashMap.containsKey(HashMap.java:335) at java.util.HashSet.contains(HashSet.java:184) at coldfusion.monitor.memory.MemoryTracker.onAddObject(MemoryTracker.java:124) at coldfusion.monitor.memory.MemoryTrackerProxy.onReplaceValue(MemoryTrackerProxy.java:598) at coldfusion.monitor.memory.MemoryTrackerProxy.onPut(MemoryTrackerProxy.java:510) at coldfusion.util.CaseInsensitiveMap.put(CaseInsensitiveMap.java:250) at coldfusion.util.FastHashtable.put(FastHashtable.java:43) - locked <0x6f7e1a78> (a coldfusion.runtime.Struct) at coldfusion.runtime.CfJspPage._arrayset(CfJspPage.java:1027) at coldfusion.runtime.CfJspPage._arraySetAt(CfJspPage.java:2117) at cfvalidation2ecfc1052964961$funcSETUSERAUDITDATA.runFunction(/app/docs/apply/cfcs/validation.cfc:377) As you see in the last line above there were several references CFMs and CFCs, and the lines have "cflock" tags, which were scoped to the "application." We (the dev team) then changed them to be scoped to a "name". After more load tests, there is no locking going on and there no deadlocks, but now the application tanks in 7-10 minutes. We've gotten system, network and DB reports from the respective admins, and they are not being taxed; even watched the server stats with server monitor, top, prstat, ran sar reports, etc. So we believe it is an issue with the CF server or maybe the JVM. I am running out of ideas as to what else we can try. Disclaimer: I am not a CF developer or Admin. I am just running the load test, analyzing the reports, threads etc, and sharing the results with the dev and admin teams, and trying the next change, and so on. So far no dice. Has anyone run into something similar? How did you go about diagnosing and troubleshooting? All thoughts and pointers welcome. Thank you for your time! KM

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• Postfix flow/hook reference, or high-level overview?

  - by threecheeseopera

  The Postfix MTA consists of several components/services that work together to perform the different stages of delivery and receipt of mail; these include the smtp daemon, the pickup and cleanup processes, the queue manager, the smtp service, pipe/spawn/virtual/rewrite ... and others (including the possibility of custom components). Postfix also provides several types of hooks that allow it to integrate with external software, such as policy servers, filters, bounce handlers, loggers, and authentication mechanisms; these hooks can be connected to different components/stages of the delivery process, and can communicate via (at least) IPC, network, database, several types of flat files, or a predefined protocol (e.g. milter). An old and very limited example of this is shown at this page. My question: Does anyone have access to a resource that describes these hooks, the components/delivery stages that the hook can interact with, and the supported communication methods? Or, more likely, documentation of the various Postfix components and the hooks/methods that they support? For example: Given the requirement "if the recipient primary MX server matches 'shadysmtpd', check the recipient address against a list; if there is a match, terminate the SMTP connection without notice". My software would need to 1) integrate into the proper part of the SMTP process, 2) use some method to perform the address check (TCP map server? regular expressions? mysql?), and 3) implement the required action (connection termination). Additionally, there will probably be several methods to accomplish this, and another requirement would be to find that which best fits (ex: a network server might be faster than a flat-file lookup; or, if a large volume of mail might be affected by this check, it should be performed as early in the mail process as possible). Real-world example: The apolicy policy server (performs checks on addresses according to user-defined rules) is designed as a standalone TCP server that hooks into Postfix inside the smtpd component via the directive 'check_policy_service inet:127.0.0.1:10001' in the 'smtpd_client_restrictions' configuration option. This means that, when Postfix first receives an item of mail to be delivered, it will create a TCP connection to the policy server address:port for the purpose of determining if the client is allowed to send mail from this server (in addition to whatever other restrictions / restriction lookup methods are defined in that option); the proper action will be taken based on the server's response. Notes: 1)The Postfix architecture page describes some of this information in ascii art; what I am hoping for is distilled, condensed, reference material. 2) Please correct me if I am wrong on any level; there is a mountain of material, and I am just one man ;) Thanks!

  Read the article

• Is it safe to enable forced ASLR via EMET on Windows?

  - by D.W.

  I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

  Read the article

• DCHP and Router load testing

  - by John H

  I manage a campground wifi network with an average of 10 - 60 active users. I have encountered issues where the router starts acting flaky (failing to assign DHCP or failing to pass traffic) without any clear warning (low cpu utilization, etc). I upgraded the router a couple times and ended up with a Netgear ProSafe VPN router that seems to be handling the traffic. The interesting thing is that the Netgear has lower specs than the Buffalo router it replaced, indicating the issue is with the DD-WRT firmware. While I'll be pursuing this issue on the dd-wrt forums, I need a way to test routers. My vision is having 1-2 computers connected on the LAN side and 1-2 computers connected on the WAN side. I want the LAN computers to be generating various type of traffic and connections, as well as requesting DCHP addresses. A few notes: The wireless aspect should be a non-issue. Most clients would connect to a wireless bridge and come into the router through a network cable. I had a monitoring server with Nagios running check_dhcp against the router. This server was connected directly by a network cable, eliminating wifi bridges and other devices from the equation. This question is somewhat related, but not exactly: Load testing wireless LANs I am going to look at IxChariot. While I'd ideally like to use a 1 computer on each side running Linux and preferably free software, I can entertain running Windows, multiple computers, or non-free software. Total bandwidth doesn't seem to be the issue. I can transfer large files all day. Even on the busiest days, the users seemed to only pull ~5Mbps. There is very little "LAN to LAN traffic" and most of it might never have reached the main router. The issue I need to test for seems to be tied to active users, or more appropriately, active sessions. I know active users or active clients is a meaningless term from a router standpoint and wouldn't mind having more appropriate terms to use. Summary: I need a way to test a routers ability in handling traffic from a large number of clients. My current strategy is to purchase a router, deploy it, and see how it fails in the live environment.

  Read the article

• http://localhost/ always gives 502 unknown host

  - by Nitesh Panchal

  My service for World Wide Web Publishing Service started successfully but whenever I browse to http://localhost/ I always get 502 Unknown host. Also, wampapache is installed side by side but when I stop IIS service and start wampapache from services.msc I get error and when I view it in System event log I get this error: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7024</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2011-06-12T17:43:28.223498400Z" /> <EventRecordID>346799</EventRecordID> <Correlation /> <Execution ProcessID="456" ThreadID="3936" /> <Channel>System</Channel> <Computer>MACHINENAME</Computer> <Security /> </System> - <EventData> <Data Name="param1">wampapache</Data> <Data Name="param2">%%1</Data> </EventData> </Event> I am fed up of this error and it is driving me nuts. I feel like banging my head against the laptop. I am really serious. Without concentrating on my real application I am trying to solve this issue since 3 hours. I google various threads and few of them said that there could be issue of Reporting Services or Skype. But I have uninstalled Skype and Reporting Services are disabled. What more should I do? I have hosts file present in etc directory and it does have mapping for localhost to 127.0.0.1. What more could I do?

  Read the article

• How much did it cost our competitor to DDoS us at 50 Gbps for two weeks?

  - by MiniQuark

  I know that this question may sound like an invalid serverfault question, but I believe that it's quite valid: the amount of time and effort that a sysadmin should spend on DDoS protection is a direct function of typical DDoS prices. Let me rephrase this: protecting a web site against small attacks is one thing, but resisting 50 Gbps of UDP flood is another and requires time & money. Deciding whether or not to spend that time & money depends on whether such an attack is likely or not, and this in turn depends on how cheap and simple such an attack is for the attacker. So here's the full story: our company has been victim to a massive DDoS attack (over 50 Gbps of UDP traffic, full-time during 2 weeks). We are pretty sure that it's one of our competitors, and we actually know which one, because we were the only two remaining competitors on a very big request for proposal, and the DDoS attack magically stopped the day we won (double hurray, by the way)! These people have proved in the past that they are very dishonest, but we know that they are not technical at all, so we believe that they simply paid for some botnet DDoS service. I would like to know how much these services typically cost, for such a large scale attack. Please do not give any link to such services, I would really hate to give these people any publicity. I understand that a hacker could very well do this for free, but what's a typical price for such an attack if our competitors paid for it through some kind of botnet service? It is really starting to scare me (if we're talking thousands of dollars here, then I am really going to freak off: who knows, they might just hire a hit-man one day?). Of course we filed a complaint, but the police says that they cannot do much about it (DDoS attacks are virtually untraceable, so they say), and our suspicions are not enough to justify them raiding our competitor's offices to search for proofs. For your information, we now changed our infrastructure to be able to sustain such attacks: we now use a major CDN service so that our servers are not directly affected by DDoS attacks. Requests for dynamic pages do get proxied to our servers, but for low level attacks (UDP flood, or Syn floods, for example) we only receive legitimate trafic, so we're fine. If they decide to launch higher level attacks (HTTP flood or slowloris attacks for example), most of the load should be handled by the CDN... at least I hope so! Thank you very much for your help.

  Read the article

• How to recover a MySQL InnoDB table?

  - by Kau-Boy

  When I try to launch the Plesk administration page of you server I get the following error: ERROR: PleskMainDBException MySQL query failed: MySQL server has gone away The MySQL Server is working well. Although it seems that the plesk database is somehow corrupt and any action on this database results in a restart of the mysql process, so even queries to other databases on the same MySQL server will be lost. If I try to connect to the plesk database using phpMyAdmin, I can only see the number of tables, the database had originally. But I am not able to open the tables listing. As soon as I try it, the mysql process crashes again. Trying to connect to the database using ssh works. I can even run a SELECT statement against any table an get a result. I don't know if it is an plesk error or an error of the psa database or even the MySQL server. Can you give me any tips on how to recover the plesk system. Should I try to repair the Plesk installation before. And if so, how can I do it and will all my settings get lost doing it? EDIT: Trying to dump the database, I get the following error: mysqldump: Got error: 2013: Lost connection to MySQL server during query when using LOCK TABLES EDIT: I could find out, that the table 'data_bases' is responsible for the crash of the MySQL server process. But trying to repair it using a REPAIR TABLE statement doesn't work. EDIT: I now dropped the whole database and restored it from a dump. But why I try to recover the data_bases table I get the following error: ERROR 1005 (HY000) at line 24: Can't create table './psa/data_bases.frm' (errno: 121) I am not able to create the table again. Somewhere in the MySQL system there is still some information about this table. I tested the same thing locally. If I just delete the table files and then try to create the table again I get the same error. If I drop the table through MySQL, I can create the table again afterwards. But trying to drop the table using MySQL the whole MySQL system crashed. Is there any way to solve that issue?

  Read the article

• Kernel-mode Authentication: 401 errors when accessing site from remote machines

  - by CJM

  I have several Classic ASP sites that use Integrated Windows Authentication and Kerberos delegation. They work OK on the live servers (recently moved to a Server 2008/IIS7 servers), but do not work fully on my development PC or my development server. The IIS on both machines were configured through an IIS web deployment tool package which was exported from an old machine; the deployment didn't work perfectly, and I had to tinker a bit to get the sites working. When accessing the apps locally on either machine, they work fine; when accessing from another machine, the user is prompted by a username/password dialog, and regardless of what you enter, ultimately it results in a 401 (Unauthorised) error. I've tried comparing the configuration of these machines against similar live servers (that all work fine), and they seem generally comparable (given that none of the live servers are yet on IIS7.5 (Windows 7/Server 2008 R2). These applications run in a common application pool which uses a special domain user as it's identity - this user has similar permissions on the live and development machines. On IIS6 platforms, to enable kerberos delegation, I needed to set up some SPNs for this user, and they are still in place (even though I don't believe they are needed any longer for IIS7+ due to kernel-mode authentication), Furthermore, this account is enabled for Kerberos delegation in Active Directory, as is each machine I am dealing with. I'm considering the possibility that the deployment might have made changes/failed to make changes to the IIS configuration thus causing this problem. Perhaps a complete rebuild (minus another web deployment attempt) would solve the problem, but I'd rather fix (thus understand) the current problem. Any ideas so far? I've just had another attempt at fixing this issue, and I've made some progress, but I don't have a complete fix...yet. I've discovered that if I access the sites via IP address (than via NetBIOS name), I get the same dialog, except that it accepts my credentials and thus the application works - not quite a fix, but a useful step. More interestingly, I discovered that if I disable Kernel-mode authentication (in IIS Manager Website Authentication Advanced Settings), the applications work perfectly. My foggy understanding is that this is effectively working in the pre-IIS7 way. A reasonable short-term solution, but consider the following explicit advice from IIS on this issue: By default, IIS enables kernel-mode authentication, which may improve authentication performance and prevent authentication problems with application pools configured to use a custom identity. As a best practice, do not disable this setting if Kerberos authentication is used in your environment and the application pool is configured to use a custom identity. Clearly, this is not the way my applications should be working. So what is the issue?

  Read the article

• Biztalk 2009 install help

  - by _pemex99_

  Hi, I try to install Biztalk2009, with SQL 2008R2CTPNov, on Win Server 2008. I'm blocked at the configuration step "groups" : [19:22:18 Info Configuration Framework]Configuring feature: WMI [19:22:18 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature [19:22:18 Info BtsCfg] Configuring feature: WMI [19:22:18 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer [19:22:18 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer [19:22:18 Info BtsCfg] Entering function: CWMI::Connect [19:22:18 Info BtsCfg] WMI is already connected [19:22:18 Info BtsCfg] Leaving function: CWMI::Connect [19:22:18 Info ConfigHelper] NT group BizTalk Server Operators was not created because it already exists [19:22:18 Info ConfigHelper NetAPI Info: ] Le groupe local spécifié existe déjà. [19:22:18 Info ConfigHelper] NT group BizTalk Server Administrators was not created because it already exists [19:22:18 Info ConfigHelper NetAPI Info: ] Le groupe local spécifié existe déjà. [19:22:18 Info BtsCfg] Entering function: CWMI::CreateGroup 2010-01-14 19:22:18:0527 [INFO] WMI CWMIInstProv::PutInstance() try to acquire lock 2010-01-14 19:22:18:0539 [INFO] WMI CWMIInstProv::PutInstance() lock acquired successfully 2010-01-14 19:22:18:0546 [INFO] WMI CWMIInstProv::VerifyMgmtDbCompatibility(CInstance) started 2010-01-14 19:22:18:0553 [INFO] WMI CWMIInstProv::VerifyMgmtDbCompatibility(CInstance) finished successfully 2010-01-14 19:22:18:0564 [INFO] WMI CWMIInstProv::PutInstance(MSBTS_GroupSetting.MgmtDbName="BizTalkMgmtDb",MgmtDbServerName="ECTXEVLBZTK") started 2010-01-14 19:22:18:0572 [INFO] WMI CAdapter::ConvertWMI2Admin() started 2010-01-14 19:22:18:0581 [INFO] WMI CDataContainer::SetWCHAR() - Possible problem: item value is overwritten 2010-01-14 19:22:18:0591 [INFO] WMI CAdapter::ConvertWMI2Admin() finished with HR=0 2010-01-14 19:22:18:0611 [INFO] WMI QueryStringValue query regkey 'MgmtDBServer' 2010-01-14 19:22:18:0620 [INFO] WMI CAdmCoreGroupInst::TryCreateNewGroup() started 2010-01-14 19:22:18:0632 [INFO] WMI Creating Mgmt database... 2010-01-14 19:22:18:0641 [INFO] WMI Calling CDataSource.Open() against ECTXEVLBZTK\master 2010-01-14 19:22:18:0792 [INFO] WMI CDataSource.Open() returned 2010-01-14 19:22:18:0810 [WARN] AdminLib GetBTSMessage: hrErr=80040e1d; Msg=Error "0x80040E1D" occurred.; 2010-01-14 19:22:18:0824 [WARN] AdminLib GetBTSMessage: hrErr=c0c02524; Msg=Failed to create Management database "BizTalkMgmtDb" on server "ECTXEVLBZTK". Error "0x80040E1D" occurred.; 2010-01-14 19:22:18:0835 [ERR] WMI Failed in pAdmInst->Create() in CWMIInstProv::PutInstance(). HR=c0c02524 2010-01-14 19:22:18:0846 [ERR] WMI WMI error description is generated: Failed to create Management database "BizTalkMgmtDb" on server "ECTXEVLBZTK". Error "0x80040E1D" occurred. 2010-01-14 19:22:18:0860 [INFO] WMI CWMIInstProv::PutInstance() finished. HR=c0c02524 [19:22:18 Error BtsCfg] f:\bt\890\private\source\setup\prod\btssetup\btscfg\btswmi.cpp(358): FAILED hr = c0c02524 [19:22:18 Error BtsCfg] Failed to create Management database "BizTalkMgmtDb" on server "ECTXEVLBZTK". Error "0x80040E1D" occurred. It seems that the install can't create Managment database, But the SSO database is created OK... Has someone a clue ?

  Read the article

• Excessive Outbound DNS Traffic

  - by user1318414

  I have a VPS system which I have had for 3 years on one host without issue. Recently, the host started sending an extreme amount of outbound DNS traffic to 31.193.132.138. Due to the way that Linode responded to this, I have recently left Linode and moved to 6sync. The server was completely rebuilt on 6sync with the exception of postfix mail configurations. Currently, the daemons run are as follows: sshd nginx postfix dovecot php5-fpm (localhost only) spampd (localhost only) clamsmtpd (localhost only) Given that the server was 100% rebuilt, I can't find any serious exploits against the above stated daemons, passwords have changed, ssh keys don't even exist on the rebuild yet, etc... it seems extremely unlikely that this is a compromise which is being used to DoS the address. The provided IP is noted online as a known SPAM source. My initial assumption was that it was attempting to use my postfix server as a relay, and the bogus addresses it was providing were domains with that IP registered as their nameservers. I would imagine given my postfix configuration that DNS queries for things such as SPF information would come in with equal or greater amount than the number of attempted spam e-mails sent. Both Linode and 6Sync have said that the outbound traffic is extremely disproportionate. The following is all the information I received from Linode regarding the outbound traffic: 21:28:28.647263 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647264 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647264 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647265 IP 97.107.134.33 > 31.193.132.138: udp 21:28:28.647265 IP 97.107.134.33.32775 > 31.193.132.138.53: 28720 op8+% [b2&3=0x4134] [17267a] [30550q] [28773n] [14673au][|domain] 21:28:28.647266 IP 97.107.134.33 > 31.193.132.138: udp 6sync cannot confirm whether or not the recent spike in outbound traffic was to the same IP or over DNS, but I have presumed as such. For now my server is blocking the entire 31.0.0.0/8 subnet to help deter this while I figure it out. Anyone have any idea what is going on?

  Read the article

• File copying software to do this kind of work... in Windows 7 32 bit

  - by Senthil

  I need a software (Windows 7 32bit) to help me in this process: I have my documents, music, video clips, movies, pictures in my hard disk. These will not be scattered around the system. But will be inside C:\Senthil\ At the end of every week, I want to plug in an external hard disk and run a software that should make sure whatever is inside C:\Senthil\ is also present in the external disk. Files deleted from C:\Senthil\ should be deleted there, and new files should be copied etc... at the end of the process, every bit inside the source folder in my internal disk should be inside my external disk. A couple of important requirements and points: I do NOT need multiple versions or historic versions. I don't need the previous versions of my files. I only want the latest copy to be present in my "backup". Incremental backup makes sense. If files were not touched since the last backup, it need not copy. The size of my folder will run into GBs and in a year or two will go into TBs. But I will make sure the size of the external HDD is equal to or bigger than my source folder. I do not want it to run automatically because when I accidentally delete a file in my source, it will delete the one in the backup (I know this is why we have versioning facilities). I just want to be able to run it manually so that I am in control of when the backup is made and what is backed up and I should be able to pick something from the backup and restore it to the source folder in the above situation. Is there any software that will let me do exactly this? I don't want any other "smart" facility of the software to interfere with this process. I know what I want and the software can keep its smartness to itself :D The main reason I am asking this question is, I am a software developer and I can write this software myself. But I am a little constrained by time at the moment and I want to know if there is an existing program that can do this. Kindly don't worry about earthquakes or fire or snowstorms and bring up the "in case of a natural disaster your backup will also be in the damage zone and will be lost" argument because: I will have bigger things to worry about than my holiday memories. I don't think I will digitally store any life-ruining documents. This backup is only to avoid the inconvenience of obtaining a new copy of stuff that I have. Not to protect them against the end of the world. I am more worried about power surges in my area frying my system, hard disk failure, children who merrily hit Delete or teens who hit Shift + Delete or myself getting a little careless at times! In short: Is there a file/folder syncing software that listens to what I say and doesn't try to act smart? Please forgive me if I sound arrogant :)

  Read the article

• Creating a network link between 2 very close buildings

  - by Daniel Johnson

  I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single computer in one of the buildings. They want to add a network with wireless, and want it to work across both buildings. Being a charity they need to keep costs down. The network would be used for sharing Word documents, e-mail, browsing and skyping. My initial thoughts were to connect the buildings with fibre. So: Option 1 Use fibre between the buildings. Sufficient cable and two TP-LINK MC100CM Fast Ethernet Media Converters. Cost ~£80.00. But there is the extra cost and hassle of running the cable down and up the external walls, lifting and relaying paving, and burying underground. Never having fitted fibre I'm also a little worried about going up the wall and then bending the cable at 90 degrees to go through the wall and into the building. Option 2 Use two TP-Link TL-WA7510N High Powered Outdoor 5Ghz 15dBi Wireless antennas to connect the buildings. There is a clear line of sight at first floor level. Cost ~£100. And much easier to fit than fibre! Is using the TL-WA7510Ns overkill? Is there something more suitable? I had hoped to use some Netgear stuff, e.g. two DGN2200, one in each house and also use them to provide the wireless link between the buildings. However, in bridge mode wireless client association is not available and repeater mode with client association only supports WEP security which isn't strong enough. Is there something similar that would be up to the job? Option 3 Connect the buildings with UTP cable. My concerns here are risk of electric shock due to a difference of potential between the buildings (or are they so close this shouldn't be an issue) and protection from lightning strikes. Is fitting lighting arrestors expensive? And what can be done to ameliorate against the risk of shock? This all falls outside my area of expertise so I would really appreciate some advice.

  Read the article

• Is there a Distributed SAN/Storage System out there?

  - by Joel Coel

  Like many other places, we ask our users not to save files to their local machines. Instead, we encourage that they be put on a file server so that others (with appropriate permissions) can use them and that the files are backed up properly. The result of this is that most users have large hard drives that are sitting mainly empty. It's 2010 now. Surely there is a system out there that lets you turn that empty space into a virtual SAN or document library? What I envision is a client program that is pushed out to users' PCs that coordinates with a central server. The server looks to users just like a normal file server, but instead of keeping entire file contents it merely keeps a record of where those files can be found among various user PCs. It then coordinates with the right clients to serve up file requests. The client software would be able to respond to such requests directly, as well as be smart enough to cache recent files locally. For redundancy the server could make sure files are copied to multiple PCs, perhaps allowing you to define groups in different locations so that an instance of the entire repository lives in each group to protect against a disaster in one building taking down everything else. Obviously you wouldn't point your database server here, but for simpler things I see several advantages: Files can often be transferred from a nearer machine. Disk space grows automatically as your company does. Should ultimately be cheaper, as you don't need to keep a separate set of disks I can see a few downsides as well: Occasional degradation of user pc performance, if the machine has to serve or accept a large file transfer during a busy period. Writes have to be propogated around the network several times (though I suspect this isn't really much of a problem, as reading happens in most places more than writing) Still need a way to send a complete copy of the data offsite occasionally, and this would make it very hard to do differentials Think of this like a cloud storage system that lives entirely within your corporate LAN and makes use of your existing user equipment. Our old main file server is due for retirement in about 2 years, and I'm looking into replacing it with a small SAN. I'm thinking something like this would be a better fit. As a school, we have a couple computer labs I can leave running that would be perfect for adding a little extra redundancy to the system. Unfortunately, the closest thing I can find is Dienst, and it's just a paper that dates back to 1994. Am I just using the wrong buzzwords in my searches, or does this really not exist? If not, is there a big downside that I'm missing?

  Read the article

• understanding my site's DNS records

  - by DaveM

  firstly apologies for using the word 'pointage' this is the word my french domain registrar uses so I may have used to wrong term. OK I would like to better understand what is going on on my 'pointage' record on my domain registrars site. for my (currently empty) web site it reports the following details... Type : Host : Destination A : www.mydomain.org : 62.210.176.146 A : mail.mydomain.org : 84.246.225.176 Mx : .mydomain.org : mail.mydomain.org I think I understand the MX record, that simply relays anything onto the mail.mydomain.org location. However why are the destination for the www and mail domains different. Even more confusing (for me) is the fact that if I ping either of www.mydomain.org or mail.mydomain.org the ping returns a different IP address. This IP address is consistent with that of my server (ie 92.39.247.92). So what exactly is going on ? I'm sure I could find the information on the web,I've read a few thing on the debianhelp site regarding DNS records, and it seems to suggest that the record should be a reverse lookup, but certains isn't the reverse of my servers IP ? but I don't what I should be looking for, so links to docs and search terms for google will be happily accepteed (even though they go against the grain of SO answers to question). thanks in advance. David. ps. I should add that everything seems to work just fine, and I've just descovered this part of the management page of my registrar. Edit: Addition of DNS records and ping results. The DNS record for the site. From what I've read there should only realy be a single 'A' record, so has something gone wrong ? should I change it (remove the extras and then just point www.facilitee.org - .facilitee.org and mail.facilitee.org - .facilitee.org here is the DNS record A www.facilitee.org ? 92.39.247.92 A .facilitee.org ? 92.39.247.92 A mail.facilitee.org ? 92.39.247.92 A webmail.facilitee.org ? 92.39.247.92 MX .facilitee.org ? mail.facilitee.org ping results... ~$ ping www.facilitee.org PING www.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): ~$ ping mail.facilitee.org PING mail.facilitee.org (92.39.247.92) 56(84) bytes of data. 64 bytes from vps4576-cloud.dns26.com (92.39.247.92): So the DNS and the ping correspond, but the 'pointage' doesn't. ~ how can I get a report of the pointage records other than from my registrar ?

  Read the article

• GMail detecting mail as spam

  - by Petru Toader

  I've been trying for a long time to get our company's mail server send mail that will get accepted by the GMail spam filter. I have managed making it work for Yahoo Mail and Hotmail, sadly GMail is still marking our mails as spam. I have configured DKIM, SPF, DMARC and verified our mail server IP address against blacklists. I also have pasted here the headers GMail gets when we send a mail. Delivered-To: [email protected] Received: by 10.42.215.6 with SMTP id hc6csp107427icb; Wed, 20 Aug 2014 07:34:26 -0700 (PDT) X-Received: by 10.194.100.34 with SMTP id ev2mr59101019wjb.76.1408545265402; Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.phyramid.com (mail.phyramid.com. [178.157.82.23]) by mx.google.com with ESMTPS id dj10si4827754wib.79.2014.08.20.07.34.24 for <[email protected]> (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) client-ip=178.157.82.23; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) [email protected]; dkim=pass [email protected] Received: from localhost (localhost [127.0.0.1]) by mail.phyramid.com (Postfix) with ESMTP id ED2BB2017AC for <[email protected]>; Wed, 20 Aug 2014 17:33:23 +0300 (EEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=phyramid.com; h= content-type:content-type:mime-version:x-mailer:subject:subject :message-id:to:from:from:date:date; s=dkim; t=1408545197; x= 1409409197; bh=e04RtoyF7G39lfCvA9LLhTz4nF64siZtN5IYmC18Xsc=; b=o +6mO8Uz4Uf1G4U2q6tKUiEy2N2n/5R2VtPPwIvBE5xzK/hEd2sDGMxVzQVgIDCsK Q0Xh+auPaQpxldQ+AEcL2XSZMrk/g0mJONjkpI19I5AwGIJCR1SVvxdecohTn9iR bCHzrGi2wAicfDBzOH6lUBNfh2thri79aubdCYc97U= X-Amavis-Modified: Mail body modified (using disclaimer) - mail.phyramid.com X-Virus-Scanned: Debian amavisd-new at mail.phyramid.com Received: from mail.phyramid.com ([127.0.0.1]) by localhost (mail.phyramid.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 3JcgXZAXeFtX for <[email protected]>; Wed, 20 Aug 2014 17:33:17 +0300 (EEST) Received: from whiterock.local (unknown [109.98.21.30]) by mail.phyramid.com (Postfix) with ESMTPSA id 05CAE200280 for <[email protected]>; Wed, 20 Aug 2014 17:33:15 +0300 (EEST) Date: Wed, 20 Aug 2014 17:34:15 +0300 From: Company Mail <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: hey there! X-Mailer: Airmail (247) MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline How was your summer? ---- Thanks a lot!

  Read the article

• Server 2012 intermittently fails to respond to pings from single host, even with firewall disabled, but responds to non-ICMP requests fine

  - by James Westbury

  This one is kind of weird. I've got the following machines involved: DC01 - 10.1.2.42, Server 2012, domain controller & DNS server, physical machine nagiosv - 10.1.2.35, CentOS 6.4, Nagios, virtual machine CB01 - 10.1.3.81, Ubuntu 12.04 LTS, couchbase server, virtual machine So, I noticed something was wrong while configuring this new Nagios VM. I started seeing DC01's state flapping. I logged into nagiosv when I saw this happening, and attempted to ping DC01, both by FQDN and its IP address. Neither worked. I tried pinging the machine from CB01, which is another VM on the same virtual switch/physical NIC as nagiosv, and that worked fine. Pings still failing from nagiosv at this time. DC01 is also an internal DNS server, so I ran dig google.com from nagiosv, and was able to run a query against DC01 just fine: ;; Query time: 1 msec ;; SERVER: 10.1.2.42#53(10.1.2.42) ;; WHEN: Fri Nov 1 07:53:51 2013 ;; MSG SIZE rcvd: 204 Pings still failing from nagiosv, though. I can ping from DC01 to nagiosv, and that works, and I can still ping from other VMs on the same physical NIC into DC01, and that works. I should mention at this point that I've disabled the firewall on DC01 for testing purposes, and it doesn't make a damned bit of difference. (Even with the firewall enabled, I have a blanket exception for ICMP from the local subnet, so it shouldn't make a difference, but I figured I should test it anyway.) I loaded up Wireshark on DC01 and pinged it from nagiosv again. What I see is a bunch of echo requests coming in and not a single reply going back out. Filtered results here, showing all ICMP traffic during a 15-second period. A few more bits of info: There are no IP conflicts on the network. MAC addresses on the incoming pings match the MAC on the VM. There are no duplicate MACs on the network, as far as I can see. I have absolutely no idea why DC01 is failing to respond, here. Any ideas?

  Read the article

• Can't find windows 2000 domain after PDC Change

  - by Mark A Kruger

  This is a windows 2000 domain issue. I had an old win2000 PDC that was beginning to fail. So, trying to be pre-emptive, I installed a new BDC, then "demoted" the old PDC and took it off the network. Now it appears that no member server can "find" the domain anymore. No logins work (for services or a RDP or anything). What I've tried (based on googling): Verified sysvol is shared on all servers. Used nslookup to verify that DC's are being found. netdiag /fix meta data cleanup routines. verified no firewall issues (port 389 etc) seizing all roles to new PDC (I did that as part of the original promotion). LMHOST file and Netbios settings. At the moment it seems like I can get the DC's returned but cannot contact them. I'm at a loss. My latest attempt was to remove a member server from the domain and try to "re-add" it. When I do that I get this message: The query was for the SRV record for _ldap._tcp.dc._msdcs.cfwebtools.com The following domain controllers were identified by the query: db-dev1.cfwebtools.com file-prod1.cfwebtools.com cfwt-pdc2.cfwebtools.com However no domain controllers could be contacted. It then goes on to ask if I've checked my A record and made sure they are running. Is there a way to force this domain to be seen? I also shared sysvol (or double checked it) and restarted the dfsr service. More information. I got looking at sysvol and found it was not shared on 2 of these servers. Only one of them (db-dev1) has a "good" or at least "populated" sys vol store. So I tried doing a "d2" recovery of my PDC against that good sysvol. But it never synchs - or at least it does not seem to synch. I'm guessing if I could get sysvol and netlogin to kick in and replicate that would fix my issue. I think these DC's aren't responding because they are waiting for replication which is broken somehow. Would taking down all the DC's except for db-dev1 fix the issue - at least temporarily? I know I can't just copy the sysvol stuff over to the other 2 can I?

  Read the article

• Why would a process monitoring script use exit 1; on finding no problems?

  - by user568458

  General question: On a Linux (Centos) server, if a process monitoring script run by cron is set to close with exit 1; rather than exit 0; on finding that everything is okay and that no action is needed, is that a mistake? Or are there legitimate reasons for calling exit 1; instead of exit 0; on the "Everything's fine, no action needed" condition? exit 0; on finding no problems seems to me to be more appropriate. But maybe there's something I'm not aware of. For example, maybe there's something specific to Cron? Or maybe there's a convention in process monitoring scripts that 'failure' means 'this script failed to need to fix a problem' (rather than what I would expect which is that exit 1; would mean 'the process being monitored has failed'?) My specific case: I'm looking at a process monitoring script written by my web hosting company. By process monitoring script, I mean a script executed by Cron on a regular basis that checks if an important system process is running, and if it isn't running, takes actions such as mailing an administrator or restarting the process. Here's the (generalised) structure of their script, for a service running on port 8080 (in this case, Apache Tomcat): SERVICE=$(/usr/sbin/lsof -i tcp:8080 | wc -l); if [ $SERVICE != 0 ]; then exit 1; else #take action fi Seems simple enough even for someone with limited knowledge like me, except the exit 1; part seems odd. As I understand it, exit 0; closes a program and signifies to the parent that executed the program that everything is fine, exit n; where n0 and n<127 signifies that there has been some kind of error or problem. Here, their script seems to go against that rule - it calls exit 1; in the condition where everything is fine, and doesn't exit after taking remedial action in the problem condition. To me, this looks like a mistake - but my experience in this area is limited. Are there cases where calling exit 1; in the "Everything's fine, no action needed" condition is more appropriate than calling exit 0;? Or is it a mistake? Wider context is pretty simple. It's a Centos VPS, running Plesk. The script is being called by Cron via Plesk's "Scheduled tasks" Cron manager. There's no custom layer between Cron and this script that would respond in an unusual way to the exit call. It's a fairly average, almost out-of-the box Plesk-managed Centos VPS (in so far as there is such a thing). The process being monitored by this script is Apache Tomcat.

  Read the article

• Subversion 1.7.x and expat location in configure

  - by ditto

  I am running CentOS 6.3 64bit and DirectAdmin control panel. Currently I have installed Apache Subversion 1.6.19 without any problems. I have installed expat and expat-devel and neon-devel using yum. When installing Apache Subversion 1.6.19 this configure command works fine: ./configure --prefix=/usr --with-ssl --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config However when installing Apache Subversion 1.7.7 using the same configure command as above, I get this error after doing commmand "make": /etc/httpd/lib/libaprutil-1.so: undefined reference to `XML_StopParser' collect2: ld returned 1 exit status make: *** [subversion/svnadmin/svnadmin] Error 1 However I found out I can solve that problem by adding this into the configure command: --with-expat=includes:lib_search_dirs:libs So it then looks like this: ./configure --prefix=/usr --with-ssl --with-expat=includes:lib_search_dirs:libs --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config However that configure command then give this warning: configure: WARNING: Expat found amongst libraries used by APR-Util, but Subversion libraries might be needlessly linked against additional unused libraries. It can be avoided by specifying exact location of Expat in argument of --with-expat option. So I want to solve that. I have experimentet alot, but not been able to figure out how to "specifying exact location of Expat" in configure command, and how to find out what the location should be? However after a lot of searching I found this: http://subversion.tigris.org/issues/show_bug.cgi?id=3997 - that is a FreeBSD user saying this: Building Subversion 1.7.x on FreeBSD currently requires a configure flag: --with-expat=/usr/local/include:/usr/local/lib:expat As that is the default location of expat on that platform, it would be nice if configure detected it automatically. However I am not using FreeBSD, I am running CentOS 6.3 64bit. Also remember I said I have installed expat and expat-devel and neon-devel using yum. However I tried to use the expat/command path posted by the FreeBSD user, and it seems to work, it does not give errors when running configure command, and does not give errors when running "make". This is what I used then: ./configure --prefix=/usr --with-ssl --with-expat=/usr/local/include:/usr/local/lib:expat --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config But this server is a production server, and therfor I need your help to advice if this is also correct to run on a CentOS server? Is the following path in expat command correct on CentOS?: --with-expat=/usr/local/include:/usr/local/lib:expat If not, please advice what it should be changed to. Thanks in advance for any confirmation or help on this!

  Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >