Search Results

Search found 9365 results on 375 pages for '13 04'.

Page 206/375 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

• Asus Eee PC 1000HE wireless woes

  - by Vladimir Noobokov

  Ever since I have upgraded my Asus Eee PC 1000HE from Lucid 10.04 to Precise 12.04 I have been having issues with my wireless connections. At first I had wireless dropouts: I would be able to start using wireless, but then after a few minutes the wireless would stop working even though I was still connected to the network. Lately things turned worse: while I connect to my wireless network, it just never works. I tried all sorts of solutions on offer here and in other forums but none worked. At best I got the wireless to work up until I rebooted, at which point I would get the same symptoms again: the wireless network is there, but it's not really working. By now I tried so many different "solutions" I don't know where to start describing them; I have also reinstalled 12.04 several times, enough to make me lose faith in Ubuntu. Help here looks like my last resort. For the record, my Asus Eee PC 1000HE is equipped with an Atheros wireless card. I have reinstalled 12.04, ran all the suggested updates, and receive the following response when I type iwconfig in the terminal: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Arsenal" Mode:Managed Frequency:2.452 GHz Access Point: 00:04:ED:48:67:89 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-29 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:27 Invalid misc:57 Missed beacon:0 eth0 no wireless extensions. Thanks in advance for any help that might be offered.

  Read the article

• E-Seminars para Parceiros - Mar-Abr/10

  - by Claudia Costa

  Para se inscrever nas formações que se encontram abaixo por favor utilize os links de registo indicados. NOME                     DATA                  DURAÇÃO LOCAL   Oracle Real-Time Decisions - Implementation Best Practices 21.04.2010        1 hora/dia            Início: 15:00h on-line Oracle WebLogic Suite 11g Overview & Proficiency Series   15,26,29,30.03.2010 1 hora/dia Início: 09:00h on-line Upgrade to Oracle WebLogic Suite 11g   19.03.2010 1 hora Início: 09:00h on-line Oracle Real-Time Decisions: Introduction to Real-Time Decisions   9.04.2010 1 hora Início: 15:00h on-line Best Strategies for Migrating from Teradata to Oracle Exadata   18.03.2010 1 hora/ Início: 15:00h on-line Oracle Database Awareness - 11gR2 Features for Data Warehouse and OLAP   19.03.2010 1 hora Início: 15:00h on-line Oracle Universal Content Management (UCM) eSeminar Series   2,25.03.2010 1 hora/dia Início: 09:00h on-line Oracle Information Rights Management Overview   17.03.2010 1 hora Início: 15:00h on-line   Para mais informações contacte Melissa Lopes - Tel: 214235194  

  Read the article

• Ubuntu 12.04 NVIDIA GeForce Go 7600 black screen during boot

  - by Florian Schmidt

  I'm using Ubuntu as the only operating system since two years. In the first Ubuntu versions I had seen my BIOS screen and the boot screens. Actually im using Ubuntu 12.04 and my screen stays black until Ubuntu is started (both screens are missing). I guess this situation appeared the first time in Ubuntu 11 (not sure). I searched via google and tried the popular activities but was not able to fix my issue. I opened the laptop and checked all connections. I'm using boot option nomodeset. I had a look through many many web pages. I don't know how to continue and hope somebody could be helpful. My hardware: Acer Aspire 9300 AMD Turion 64 x2 NVIDIA GeForce Go 7600 (using proposed driver) lspci | grep NVIDIA 00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 03:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce Go 7600] (rev a1) So my question is what to do to fix the black screen during boot?

  Read the article

• Cannot re-install Ubuntu 12.04 via USB (USB booting issue)

  - by Mohd Arafat Hossain

  I've read the previous questions related to my same problem regarding the USB not booting issue and have tried everything from what was replied in those post's but still no luck. I will tell you everything I have done so far (If it helps in any way...) 1) Previously I had Windows 7 running on my laptop, where I downloaded the official torrent ISO (i386 desktop) and using Unetbootin I made a bootable USB 2) Restarted the laptop with the USB connected and IT BOOTED, then I installed it on my HDD(Internal) replacing my Windows 7 3) After installing it restarted and I took some time to explore Ubuntu after the log in, then went online and followed some website for the things to do after installing Ubuntu 12.04.....and then there were errors while installing some softwares and plug-ins. The error asked me to check if i was connected to the Internet properly....while I was surfing facebook good as always on an open Firefox. The same error comes when installing Ubuntu one. 4) so I decided to re-install Ubuntu thinking I had done something wrong during the installation (I'm installing from the same USB)...and it didn't boot. I checked the boot priority and it was/is set in USB first (as always). To say in detail what happens is when I restart the USB light flashes at start, later on stops and in the screen the installed Ubuntu 12.04 loads up for me to log in (meaning it's not booting from the USB). By reading you can see that I haven't done much and I honestly didn't even touch the system settings to mess things up. As I have mentioned above I've tried everything in the previous post's in this related topic and it didn't work so I'm hoping for a new solution as a reply. Thanks in advance :) Edited: I wanted to add this I want to clean install instead of solving errors so please give a step by step guide. thanks for any help :)

  Read the article

• Register Today for Upcoming Oracle Solaris Events!

  - by Terri Wischmann

  Don't miss out on the exciting upcoming events around Oracle Solaris 11!  Register today for one or all of them - Check out the events below and Register Today! Please join us for the next Oracle Solaris Developer Webinar: "Simplify Your Development Environment with Zones, ZFS & More" on 04/10 @ 9am PT by Eric Reid (Principal Software Engineer) and Stefan Schneider (Chief Technologist ISV-Engineering) Register Now! Check out the upcoming Free OTN Sys Admin Day on April 10th on the Oracle Santa Clara Campus. Full Day of Hands on Labs Training, Demos, and Presentations.  Come learn about Oracle Solaris 11, Oracle Solaris Studio, Oracle Technology Network and Oracle Enterprise Linux! Register Now! Attend the Oracle Solaris 11 Technical Track at the NLUUG Conference in The Netherlands: April 11th, 2012  - This year, the conference will focus on Operating System innovations. Come learn about the innovations Oracle Solaris 11 brings, with technical deep-dive talks presented by Oracle experts. For more information including the agenda click here

  Read the article

• Cannot FTP without simultaneous SSH connection?

  - by Lucas

  I'm trying to set up an old box as a backup server (running 10.04.4 LTS). I intend to use 3rd party software on my PC to periodically connect to my server via FTP(S) and to mirror certain files. For some reason, all FTP connection attempts fail UNLESS I'm simultaneously connected via SSH. For example, if I use putty to test the connection to port 21, the system hangs and times out. I get: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] <cursor> However, when I'm simultaneously logged in (in another session) everything works: 220 Connected to LeServer USER lucas 331 Please specify the password. PASS [password] 230 Login successful. Basically, this means that my software will never be able to connect on its own, as intended. I know that the correct port is open because it works (sometimes) and nmap gives me: Starting Nmap 5.00 ( http://nmap.org ) at 2012-03-20 16:15 CDT Interesting ports on xx.xxx.xx.x: Not shown: 995 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 53/tcp open domain 139/tcp open netbios-ssn 445/tcp open microsoft-ds Nmap done: 1 IP address (1 host up) scanned in 0.15 seconds My only hypothesis is that this has something to do with iptables. Maybe it's allowing only established connections? I don't think that's how I set it up, but maybe? Here's my iptables rules for INPUT: lucas@rearden:~$ sudo iptables -L INPUT Chain INPUT (policy DROP) target prot opt source destination fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ufw-before-logging-input all -- anywhere anywhere ufw-before-input all -- anywhere anywhere ufw-after-input all -- anywhere anywhere ufw-after-logging-input all -- anywhere anywhere ufw-reject-input all -- anywhere anywhere ufw-track-input all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:ftp I'm using vsftpd. Any thoughts/resources on how I could fix this? L

  Read the article

• Cannot make Wi-Fi hotspot

  - by Junaid

  I want to make my laptop as wi-fi hotspot. To do so, I pressed button Settings-Network-Wireless-Use as Hotspot.. Then it creates a wireless network connection 'Hostspot' and connects. But it gets disconnected just after making connection. Here is my network hardware info: sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:d9200000-d9201fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:45 ioport:2000(size=256) memory:d5010000-d5010fff memory:d5000000-d500ffff memory:d5020000-d502ffff My machine is running on Ubuntu 11.10 Can anybody help in it? Thanks

  Read the article

• Disk space suddenly 100% used?

  - by dannymcc

  I'm trying to identify why, suddenly, 100% of our disk space is in use. I have already rebooted but the issue persists. Here are the outputs of some commands that are showing some strange (for me) results: danny@hydrogen:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p1 130G 122G 949M 100% / none 1.9G 196K 1.9G 1% /dev none 2.0G 0 2.0G 0% /dev/shm none 2.0G 40K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw danny@hydrogen:/$ sudo du -chs / du: cannot access `/proc/1662/task/1662/fd/4': No such file or directory du: cannot access `/proc/1662/task/1662/fdinfo/4': No such file or directory du: cannot access `/proc/1662/fd/4': No such file or directory du: cannot access `/proc/1662/fdinfo/4': No such file or directory danny@hydrogen:/$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/cciss/c0d0p1 135342296 128144108 323104 100% / none 1991336 196 1991140 1% /dev none 1995788 0 1995788 0% /dev/shm none 1995788 40 1995748 1% /var/run none 1995788 0 1995788 0% /var/lock none 1995788 0 1995788 0% /lib/init/rw danny@hydrogen:/$ mount /dev/cciss/c0d0p1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) danny@hydrogen:/$ sudo du -h --max-depth=1 634M ./premvet_sync 5.6M ./etc 4.0K ./opt 16K ./lost+found 7.4M ./bin 623M ./lib 196K ./dev 0 ./sys 4.0K ./srv 4.0K ./cdrom 8.0K ./media 52K ./tmp ... it hangs for ages here..... The server is running Ubuntu 10.04.4 LTS. System load: 2.85 Temperature: 8 C Usage of /: 94.7% of 129.07GB Processes: 132 Memory usage: 39% Users logged in: 0 Swap usage: 0% IP address for eth0: 192.168.1.124 => / is using 94.7% of 129.07GB I'm struggling to comprehend why this is happening! Any pointers would be appreciated.

  Read the article

• Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

  - by zach

  My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

  Read the article

• Why does my name resolution hit the DNS even with a hosts file entry?

  - by Volomike

  I'm running Ubuntu 10.04.2 LTS Desktop. Being a web developer, naturally I created a "me.com" in my /etc/hosts file. Unfortunately, my name resolution is going out to the DNS before first checking my local hosts entry and I can't figure out why. The end result is that if my /etc/resolv.conf contains "nameserver 127.0.0.1" in there first, then I get a response back in my web browser from me.com (local) within less than a second. But if I don't have that entry, then my response takes sometimes as much as 5 seconds if my ISP is a little slow. The problem was so troublesome that I actually had to file a question here (and someone resolved it) for how to automatically insert that entry into /etc/resolv.conf. But one of the users (@shellaholic) here highly recommended (and commented back and forth with me about it) that I should file this question. Do you know why my workstation's name resolution has to hit the DNS server first before hitting my /etc/hosts file entry? For now, I'm using the resolv.conf trick (see link above).

  Read the article

• Can't add to panel nor delete panel

  - by david

  Hello everybody! I cannot add any applet to any (top or bottom) panel, cannot delete any panel nor create a new panel. When I right-click on the panel the only options available are: Properties, Help or About panels. [I cannot post an image because of spam prevention, so I'll do my best] I can see when I right-click (bold means clickable): Add to panel Properties Delete this panel New panel Help About Panels Trying to solve this I did what is usually suggested: gconftool-2 –-recursive-unset /apps/panel # might be optional rm -rf ~/.gconf/apps/panel pkill gnome-panel but I only got a nice empty panel (no Applications Places System, no clock, no shutdown button...) to which I couldn't add any applet, so I decided to take the default profiles in .gconf and .gconfd from a live CD and overwrite mines. Now we are back to the beginning. I also have tried to lock completely the panel (with both gconf-editor and pessulus) and later unlock it completely but it didn't work. Here is the system information: $ lsb_release Distributor ID: Ubuntu Description: Ubuntu 10.04.2 LTS Release: 10.04 Codename: lucid Thank you very much.

  Read the article

• Log php errors in ubuntu

  - by resting

  I followed the setup here: Where is the PHP error log When I look into /var/log/php_errors.log, I could see some PHP errors. PHP Warning: file_get_contents(/var/www/...): failed to open stream: No such file or directory in ... But what I'm trying to see is the error when I removed a semicolon from a statement. That error above has no relation to file from where I removed the semicolon so we can just ignore that. When I access the page with the removed semicolon, I get The website encountered an error while retrieving https://myapp/download/decode/testfile. It may be down for maintenance or configured incorrectly. HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfill the request. But no logs in /var/log/php_errors.log. How do I see the error that usually says which line and which file the process failed? The real reason for trying to see the error is because I have a very huge loop, that throws the HTTP 500 error and I can't see the exact error. I'm just simulation with a removed semicolon to test things out. Other settings: error_reporting = E_ALL & ~E_DEPRECATED display_errors = On On Ubuntu 10.04.4 LTS Update Ok, I managed to get the error message to display. Parse error: syntax error, unexpected T_IF in ... However, it's still not logged. It wasn't displaying previously because Cakephp's debug level was at 0. Setting it to 2 displays the message, but no logs.

  Read the article

• PCI-e SEALEVEL dual serial card not recognized on Ubuntu 14.04

  - by kwhunter

  New to Ubuntu, running 14.04. I have trouble with the serial port setup, I have a plug-in PCI-e SEALEVEL dual serial card that is not recognized. user1@WSIWORKSTATION2:~$ dmesg | grep tty [ 0.000000] console [tty0] enabled [ 1.577197] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.943326] tty ttyprintk: hash matches [ 17.240880] ttyS4: LSR safety check engaged! [ 17.241589] ttyS4: LSR safety check engaged! [ 17.242354] ttyS5: LSR safety check engaged! [ 17.243058] ttyS5: LSR safety check engaged! [ 17.243918] ttyS6: LSR safety check engaged! [ 17.244485] ttyS6: LSR safety check engaged! [ 17.245195] ttyS7: LSR safety check engaged! [ 17.245830] ttyS7: LSR safety check engaged! [ 17.246554] ttyS8: LSR safety check engaged! [ 17.247191] ttyS8: LSR safety check engaged! user1@WSIWORKSTATION2:~/Desktop/seacom$ lspci -d 135e: -vvv 02:04.0 Bridge: Sealevel Systems Inc Device e205 (rev aa) Subsystem: Sealevel Systems Inc Device e205 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- SERR- Capabilities: However, the manufacturer's drivers won't install: 1. user1@WSIWORKSTATION2:~/Desktop/seacom$ make install ---------------------------------------------------------------- Installing seacom suite. ---------------------------------------------------------------- --Installing utilities-- /usr/bin/ld: skipping incompatible ../../lib/libftd2xx.a when searching for -lftd2xx /usr/bin/ld: cannot find -lftd2xx collect2: error: ld returned 1 exit status make[2]: *** [setusb] Error 1 make[1]: *** [install] Error 1 make: *** [install] Error 1 2. user1@WSIWORKSTATION2:~/Desktop/seaio$ make install ---------------------------------------------------------------- Installing SD suite. ---------------------------------------------------------------- *Compiling SeaIO Library source file: digitalIoDevice.cpp gcc: error trying to exec 'cc1plus': execvp: No such file or directory make[1]: *** [digitalIoDevice.o] Error 1 make: *** [install] Error 1 I was not able to find a solution, so if anyone can help it will be much appreciated. PS Have some troubles with formatting my post, apologies...

  Read the article

• Impossible installing Ubuntu 13.04 in UEFI mode with Windows 8 preinstalled

  - by Lautaro Vergara

  I know this is a dejavu but let me please explain my problem. When booting 13.04 installation media EFI mode get to a black screen with Grub version 2.00-l3ubuntu3 version appears after selecting "install" or "try Ubuntu", there appear error messages: - failure reading sector ... from 'cd0' - you need to load the kernel first I have a Dell Vostro 3560 with Windows 8. I have downloaded and burned ubuntu-13.04-desktop-amd64.iso. Hashes checked. I've booted from the dvd with Secure Boot enabled. The same happens when Secure Boot is disable. When booting with Legacy BIOS, installation starts. I tried Ubuntu without installing and looks OK. BUT, I did not follow the installation because in https://help.ubuntu.com/community/UEFI#Converting_Ubuntu_into_EFI_mode there appears "if the other systems (Windows Vista/7/8, GNU/Linux...) of your computer are installed in EFI mode, then you must install Ubuntu in EFI mode too.", which is the case in my computer. I have read many similar questions and the corresponding answers from people in this forum, but till now I haven't found a solution. Could someone help me on this subject? Thanks in advance!

  Read the article

• Missing /dev/xconsole causes rsyslog to stop as well as all other services

  - by George Van Tuyl

  We are running Ubuntu-10.04.04LTS in Hyper-V environments. We found that the services ssh http or anything else stopped because the rsyslog daemon had died with the message unable to find the /dev/xconsole file. I fixed it temporarily with the following. FILE=/dev/xconsole if [ -e $FILE ]; then echo "$FILE exists Carry on!" else mknod -m 640 /dev/xconsole c 1 3 chown syslog:adm /dev/xconsole echo "Created $FILE." fi The problem is that I can not get rsyslog daemon to process these 8 lines when I restart the daemon. Also restarting the daemon removes the /dev/xconsole file and we are back to all service stopped. In addressing this problem I have inserted the if--fi lines after the start and restart conditions in the rsyslog script. The problem is I do not get an echo to stdio. Does someone have an idea on how to make the rsyslog report to stdio when it creates the /dev/xconsole device. Thanks George Van Tuyl

  Read the article

• snmpd agent sends duplicate traps

  - by jsnmp

  I am on Ubuntu 10.04.4 LTS, and I cannot upgrade to a higher version. I have installed the snmpd agent (NET-SNMP version 5.4.2.1) with an apt-get install snmpd command. When an event occurs which sends a trap, two traps are sent for each such event instead of one. For example, when I shut down the agent with command /etc/init.d/snmpd stop, two shutdown traps are sent to the destination host. If I then start back up the agent with command /etc/init.d/snmpd start, then two cold start traps are sent to the destination host. Is this a known issue? Is there a fix for this, or is there a configuration change that is needed to prevent the sending of the duplicate trap? These are the contents of the /etc/snmp/snmpd.conf file: rocommunity public authtrapenable 1 trap2sink <trap destination hostname> public These are the contents of the /etc/default/snmpd file: # This file controls the activity of snmpd and snmptrapd # MIB directories. /usr/share/snmp/mibs is the default, but # including it here avoids some strange problems. export MIBDIRS=/usr/share/snmp/mibs # snmpd control (yes means start daemon). SNMPDRUN=yes # snmpd options (use syslog, close stdin/out/err). SNMPDOPTS='-Ls3d -Lf /dev/null -u snmp -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf' # snmptrapd control (yes means start daemon). As of net-snmp version # 5.0, master agentx support must be enabled in snmpd before snmptrapd # can be run. See snmpd.conf(5) for how to do this. TRAPDRUN=no # snmptrapd options (use syslog). TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid' # create symlink on Debian legacy location to official RFC path SNMPDCOMPAT=yes

  Read the article

• Ralink RT3060 wireless device configuration on ubuntu 12.04

  - by Stephan

  concerning How do I get a Ralink RT3060 wireless card working? I'm running Ubuntu 12.04 with a 'LWPX07 Edimax EW-7711In 150M 1T1R WL PCI Card' which has a rt3060 chip. Out of the box the card is recognized as rt2800sta. I tried solution one, that didn't work. Still the card connects to the wireless network, but it seems to slow to load any pages. Then I tried solution 2, but then the network-manager doesn't see any wireless device. $ iwconfig lo no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. $ lsmod Module Size Used by rt3562sta 882296 0 $ lspci -v 05:02.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Edimax Computer Co. Device 7711 Flags: bus master, slow devsel, latency 64, IRQ 23 Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2860 Kernel modules: rt3562sta, rt2800pci Am I missing a configuration step? How do I tell the network card which driver to use? Thanks in advance Stephan I found the problem. As described in stevens blog http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ sudo su make && make install "You need to use ‘sudo su’ and not just ‘sudo’ so it creates the directories properly." That is the problem with the solution describe above.

  Read the article

• "cannot open file system. File system seems damaged "

  - by suresh kadiri

  I was using windows 7 till yesterday. I tried to install ubuntu 14. 04 Lts version yesterday with in windows 7. But it was not succeeded. Then I decided to install ubuntu only. By mistake I installed ubuntu in whole disk. After that to get deleted partitions I installed testdisk. I also used deeper search option. Now I'm getting "file system damaged". It shows The hard disk (320GB /298 GiB) seems to small! (<473 GB /441 GB) Check the Harddisk size: HD Jumpers setings, BIOS detection... The following partitions can't be recovered: Partition start end size in sectrors Linux 19077 177 45 57604 81 13 618930716 Linux 19080 192 57 57607 96 25 618930716 With ubcd also I used testdisk option. Same result comes."cannot open file system. File system seems damaged ". I have all my stuff in hard disk. Please help me to get recover my files in deleted partitions.

  Read the article

• Youtube video streaming slow

  - by Newbie

  When I try to stream youtube videos on my ubuntu 11.04, they don't stream smoothly. They buffer well and are choppy. Here's my Config: Laptop: Gateway NV58 Ram : 4 GB Ethernet Controller: Broadcom Corp NetLink BCM5784M Gigabit Ethernet PCIe (rev10) Let me know if you need more details. Thanks Newbie Output of "lspic": 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 04:00.0 Network controller: Intel Corporation WiFi Link 5100

  Read the article

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Using USB to Ethernet with Linux Ubuntu 12.04

  - by Sriram

  Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

  Read the article

• Bizarre image loading problem from apache2

  - by NateDSaint

  Users have complained a few times about seeing a bizarre set of pink or green stripes on our webpage. At first I thought there were a rash of video card outages, but then someone sent me a screenshot from their browser (IE8). I later saw the same thing, but with slightly different colors on Chrome. Users have experienced this on their iPads and iPhones (iOS Safari). Because I've optimized the site to cache images, the bad image stays around until you clear your cache, so once you do, it resolves itself. My assumption is that the transmission of the image is being cut off mid-stream and then staying that way, but I can't for the life of me figure out why. Here's what I've checked: Header length is being sent, and transmission looks okay (wget sample below): wget http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg --2012-04-05 08:46:00-- http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg Resolving www.superiorlivestock.com (www.superiorlivestock.com)... [ip redacted] Connecting to www.superiorlivestock.com (www.superiorlivestock.com)|[ip redacted]|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 45926 (45K) [image/jpeg] Saving to: `wallbg2.jpg' Images are not being served gzipped (apache conf below): SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary The site is www.superiorlivestock.com, and here's a sample of the bad page load: Is there something obvious I'm missing? Am I saving my images in the wrong format somehow?

  Read the article

• How can I set up Eclipse to work with a Quickly program?

  - by Niklas

  I've installed PyDev in Eclipse and have configured my project so that the project lies under Workspace/Eclipse and the Quickly files lies under Workspace/Quickly. To connect the two I've linked the Quickly project by creating a new folder in Eclipse under the project and select the "advanced option" in the dialog to link a folder into the project. That way I don't need to have the Eclipse project files in my Quickly project. But there is two issues that arises for me: In Eclipse I have to select a Python interpreter and I have no idea what to do. I've googled around for an answer but I can't find if Quickly uses Python 3 or 2.7. Can someone help me make an informed choice? (I'm new to developing Python, that's why I can't tell the difference by the syntax - if there even is a difference) I can't press the "Run" button to launch the application. Must I initialize a program with quickly run? I want to be able to debug through Eclipse, how do I configure this? I'm using Ubuntu 12.04.1 LTS and the Eclipse version from the repositories. Thanks!

  Read the article

• Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

  - by user900749

  I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

  Read the article

• xorg, nvidia, log-in all hosed - how can I completely reset graphics set-up/settings?

  - by Fred Hamilton

  I just did a fresh install of Mythbuntu 12.04.1 on my Intel MB with nVidia 9500GT graphics card. Hardware's been working great with 10.10 for about 2 years. Background: (optional - feel free to skip to question) I was trying to get my component video output to generate 720p, messing around with the nvidia drivers, and now the entire display system is hosed. I can SSH in and get a terminal. Depending on which nvidia package I install/remove, I get: Garbage on screen (after I "apt-get remove nvidia*") A low-res graphical log-in screen where I can log in as fred or guest. If I log in as fred, it displays some text mode status line then goes right back to the log-in screen. If I log in as guest, I actually get the full Ubuntu desktop, but I need to be able to log in as fred. Other times I get an error: "API mismatch: the NVIDIA kernel module has version 304.43, but this NVIDIA driver component has version 295.49." I've googled around, including trying this thread with the same error message, but to no effect. Question: How can I just reset x settings, drivers, everything display-related to the exact same way it was after a fresh install?

  Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >