Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 206/664 | < Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >

  • Live noise-filter on line-in

    - by Damon Gant
    I'm running the following setup: Xbox 360 is hooked up to my (PC) screen via HDMI/DVI converter. Because the Xbox has no dedicated sound output, except for optical S/PIDF, I'm also using the AV/RCA output, namely just the audio, which is connected to an old stereo, which is then connected to my PCs line-in. I'm now experiencing a some of noise. I'm using one of the standard "Realtek High Definition Audio" cards, which doesn't seem to offer this kind of functionality. Is there a software that will playback audio right off a device while running filters on it? It doesn't have to create a device on its own, I just want to listen to it. Here's a sample: http://puu.sh/1suY6

    Read the article

  • List all devices of system

    - by pareshverma91
    In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

    Read the article

  • Windows does not detect any modems anymore[HSPA]

    - by Shenal Silva
    By an accident i uninstalled my Connect manager (ZTE). but when i re-install it the virtual CD drive is detected but it does not detect the drivers. When i direct to the folder containing the relevant drivers(.sys files) still it doesnt detect. Then i tried a modem of a different brand Huawei the same problem presists As i understand it is not a device(brand) driver specific issue as it does not detect modem(dongles) of any brand. when i plugged in a different USB device(a pen drive) the driver is detected and it works perfectly. Please help me with the issue i have tried system restore but it doesnt work. I want a repair that works without re-installing windows [Edit] I tried Karan's suggested method with usboblivion it didnt work. now im sure that the issue does not deal with the registry

    Read the article

  • Linking "Wave Volume" to "Main Speaker Volume"

    - by ZorbaTHut
    I've got a Logitech keyboard and a digital sound device. The Logitech keyboard has a little volume wheel that sets the Main Speaker Volume. The digital sound device ignores the Main Speaker Volume and only pays attention to Wave Volume. See the issue? I'm looking for a program that can link Wave Volume to Main Speaker Volume. The closest I've found is a little utility named VolumeTracker, but it eats an entire CPU core, which is a bit much for a program of this functionality. Alternatively, I'd take a way to make the standard Logitech drivers change Wave Volume instead of Main Speaker Volume.

    Read the article

  • Identifying the version of ATI Catalyst drivers

    - by snark
    I have bought a new video card based on the ATI Radeon HD 5670 chipset. I couldn't make it work with the latest ATI Catalyst drivers found on their website, only the drivers found on the CD delivered with the card worked. How can I know the version of Catalyst that is installed on my PC (running Windows 7 64-bits)? The ATI Catalyst Control Center returns the following information: Driver Packaging Version 8.673-091110a-092263C Provider ATI Technologies Inc. 2D Driver Version 8.01.01.973 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version 8.14.10.0708 OpenGL Version 6.14.10.9120 Catalyst™ Control Center Version 2009.1110.2225.40230 I do not recognize anything pointing to a "marketing version". The website says the current version of Catalyst is 10.2.

    Read the article

  • Windows 7 "Backup completed but some files were skipped"

    - by Andrew Coleson
    I set up Windows 7 Pro to backup my files to a network path (woohoo!) and chose to backup "data for newly created users, libraries", and my user folder (no system image). All went fine (although the first backup took ~12 hours for some ridiculous reason), but at the end it gave me a message that "Your backup completed, but some files were skipped. Click to see which files." I checked and the "files" skipped were my 3 network-mapped drives, which is perfectly fine and reasonable behavior (I certainly don't need it to back up my network-mapped drives as part of my local PC backup), but in the Backup and Restore center it warns me that my Last backup was "Never" and the Action Center now has a permanent "Check your backup results" issue. Is there any way to set up the backup to exclude the network-mapped drives or tell it that I really don't mind that it skipped drives I never asked it to back up?

    Read the article

  • Can't start my Windows XP Virtual Machine: Insufficient Disk Space

    - by Rob
    Okay, I currently have a server with two virtual machines installed on it, a CentOS5.4 and a Windows XP. I was remote desktopping the Windows XP chatting on IRC, and all of a sudden I lost connection. I checked with my HyperVisor and tried to restart it, and it won't start at all. It's giving me this error: Message from server0297.serverpool.gnet.ba: Failed to extend swap file (fileHandle 16414) from 0 KB to 524288 KB: No space left on device. Could not power on VM : No space left on device. Failed to power on VM info 4/17/2010 9:49:20 PM root Basically I bought the set up from a host, he installed the HyperVisor and the VirtualMachines, and honestly I don't really know what I'm doing. I've looked at some of the settings, and I can't figure it out. If you need any additional information, I'll try to provide it. The CentOS5.4 is still starting and working flawlessly, if that's relevant.

    Read the article

  • Looking for detailed Instructions on building a DIY NAS

    - by Kaushik Gopal
    I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • Netdom to restore machine secret

    - by icelava
    I have a number of virtual machines that have not been switched on for over a month, and some others which have been rolled back to an older state. They are members of a domain, and have expired their machine secrets; thus unable to authenticate with the domain any longer. Event Type: Warning Event Source: LSASRV Event Category: SPNEGO (Negotiator) Event ID: 40960 Date: 14/05/2009 Time: 10:24:54 AM User: N/A Computer: TFS2008WDATA Description: The Security System detected an authentication error for the server ldap/iceland.icelava.home. The failure code from authentication protocol Kerberos was "The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)". For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: c000006d Event Type: Warning Event Source: LSASRV Event Category: SPNEGO (Negotiator) Event ID: 40960 Date: 14/05/2009 Time: 10:24:54 AM User: N/A Computer: TFS2008WDATA Description: The Security System detected an authentication error for the server cifs/iceland.icelava.home. The failure code from authentication protocol Kerberos was "The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)". For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: c000006d Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 3210 Date: 14/05/2009 Time: 10:24:54 AM User: N/A Computer: TFS2008WDATA Description: This computer could not authenticate with \\iceland.icelava.home, a Windows domain controller for domain ICELAVA, and therefore this computer might deny logon requests. This inability to authenticate might be caused by another computer on the same network using the same name or the password for this computer account is not recognized. If this message appears again, contact your system administrator. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: c0000022 So I try to use netdom to re-register the machine back to the domain C:\Documents and Settings\Administrator>netdom reset tfs2008wdata /domain:icelava /UserO:enterpriseadmin /PasswordO:mypassword Logon Failure: The target account name is incorrect. The command failed to complete successfully. But have not been successful. I wonder what else needs to be done?

    Read the article

  • Windows Vista wont recognize SSD drive

    - by Spiros
    I just bought an SSD drive for my Vista (32bit) box (120GB OCZ Agility 3). Unfortunately windows vista won't display it in the my computer window, and generally wont let me work on it. However, the bios recognizes the SSD drive correctly, and when I go on the windows device manager the drive is there as well. I can see the device properties. On the volumes, when I click on populate, I have: Disk: Disk1 Type: Uknown Status: not initialized Partition style: not avaiable Unallocated space: 0MB Reserved space: 0MB Any ideas what could be wrong? Thanks

    Read the article

  • How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

    - by user45924
    I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

    Read the article

  • Aruba Wireless Controller 200 and AP70 manual

    - by techie
    I have an Aruba wireless system that is currently in use but there is no documentation from the previous person in charge. I have no manuals or login information for the wireless controllers and APs. I checked the Aruba website and you need to register to access the support information but registration isn't instant and takes several days. I've waited for quite a while now and have tried googling and checking the Aruba forums but have found no indication of a manual. What I really need is the ability to reset the controller and APs so I can access the device with the default username and password. There is no reset button on this device so I have no idea how you go about resetting the controller and APs. Hm it seems I can't create a new tag as a new user. If possible can someone add an "Aruba" tag?

    Read the article

  • 1Tb disk formatted on Linux won't mount on windows nor mac

    - by Pedro MC
    I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

    Read the article

  • How do I execute a command before kickstart parses ks.cfg?

    - by Crazy Chenz
    How do I execute a command before kickstart parses ks.cfg? My specific problem is that I want to install redhat into a tmpfs by telling kickstart: part / --fstype ext3 --size 1000 --maxsize 4000 --ondisk loop1 I've tried doing: %pre #!/bin/sh mkdir /tmp-root mount -t tmpfs tmpfs /tmp-root dd if=/dev/zero of=/tmp-root/tmp-root.img bs=4096 count=1000000 losetup /dev/loop1 /tmp-root/tmp-root.img but that is not done early enough. Ugh! Update: I'm beginning to think it has nothing to do with being done early enough. I believe it has to do with anaconda and kudzu not thinking that a loopback device is a valid device. I'm not a python guy, so the idea of hacking up the kickstart code sucks! -Vinnie

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • Ubuntu server 10.04 doesn't boot into installed Gnome desktop automatically

    - by Tong Wang
    I've installed Ubuntu server 10.04 and then installed Gnome desktop on top of it, because I am new to Linux and its command line, I need the GUI desktop to help me get around. However, the problem I got is that the server doesn't boot into the GUI desktop when powered on. It's booting into a shell like this: Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enought?) - check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/cecdata-root does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) result of (cat /proc/cmdline) BOOT_IMAGE=/vmlinuz-2.6.32-28-server root=/dev/mapper/cecdata-root ro quiet Then I have type "exit" to exit the shell and then it boots into Gnome. Any idea what's wrong? Edit: add output for the following commands wt@cecdata:~$ ls /dev/mapper/ cecdata-root cecdata-swap_1 control wt@cecdata:~$ fdisk -l wt@cecdata:~$ wt@cecdata:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/cecdata-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=1635be41-d025-405e-b4a3-6f0abedb7aab /boot ext2 defaults 0 2 /dev/mapper/cecdata-swap_1 none swap sw 0 0 wt@cecdata:~$ Adding output for lsmod wt@cecdata:~$ lsmod Module Size Used by fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit dell_wmi 2177 0 dcdbas 6918 0 vga16fb 12757 1 vgastate 9857 1 vga16fb psmouse 64576 0 serio_raw 4950 0 power_meter 9473 0 bnx2 72874 0 lp 9336 0 parport 37160 1 lp mptsas 50592 2 usbhid 41116 0 mptscsih 37167 1 mptsas hid 83568 1 usbhid mptbase 91674 2 mptsas,mptscsih scsi_transport_sas 33021 1 mptsas

    Read the article

  • Links to detailed instructions on building a DIY NAS

    - by Kaushik Gopal
    I'm looking for good links with detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I did a fair bit of searching and found these links (so please suggest others). Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device While these links are great they delve more on the hardware side. I'm looking for more instructions in the software side.

    Read the article

  • How do I built a DIY NAS?

    - by Kaushik Gopal
    I'm looking for good, detailed instructions on how to build a DIY NAS (Network Access Storage). I'm planning on doing it cheap (old PC config + open source software). I would like to know: What hardware I need to built one What kind of hard-drive setup I should take (like RAID) Or any other relevant hardware related advices (power supply, motherboard etc...) What software I should run on it, both what OS and software to manage the contents effectively So the NAS is recognizable and accessible to my network I can make sure my Windows computers will recognize it (when using Linux distro's) I can access my files from outside my network I already did a fair bit of searching and found these links, but while these links are great they delve more on the hardware side. I'm looking for more instructions in the software side. Ubuntu Setting up a Home NAS DIY NAS Smackdown How to Configure an $80 File Server in 45 Minutes FreeNAS Build a NAS Device With an Old PC and Free Software Build Your Own NAS Device

    Read the article

  • Netgear Wireless-n 150 wrn1000v2

    - by Jordan
    I'm not sure if this is the place to ask this question, move it if it's not. I'm trying to fix a wireless network. It only connects to a few devices and when it does work the connection is spotty. The router is a netgear wireless-n 150 wrn1000v2. Connecting to the router isn't a big problem, but connecting to the internet via WiFi is. I can't upgrade the firmware becuase it is from Comcast and it seems as though they only allow their versions of the firmware. I've monitored the network with wireshark and I see that the devices that are having trouble connecting are constantly asking "who is 192.168.1.1 tell 192.168.1.x" where x is the ip for the device. 192.168.1.1 is the router. This is from running wireshark on the wireless device. What does this mean. At this point I feel like buying a new router is the only option.

    Read the article

  • Create mirror software raid with bad blocks hdd. How to check data integrity?

    - by rumburak
    There is error in System event log like this one: "The device, \Device\Harddisk1\DR1, has a bad block." Because of above I created Raid 1 on this disk and other one. I'm using Windows Server 2008 R2 software RAID volumes. Volume in Disk Manager is marked as "Failed Redundancy" and "At Risk". I could command to "Reactivate Disk" and it's starts to re-sync, but after a while it stops and returns to previous state. It stops re-sync on bad block on old disk and creates same error in System event log. Old disk status is Errors, new disk status is Online. How can I check that there is exact copy of the old disk on new one ? It is server machine so I would prefer to keep it running during this check.

    Read the article

  • second ip address on the same interface but on a different subnet

    - by fptstl
    Is it possible in CentOS 5.7 64bit to have a second IP address on one interface (eg. eth0) - alias interface configuration - in a different subnet? Here is the original config for eth0 more etc/sysconfig/network-scripts/ifcfg-eth0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.91.255 HWADDR=00:1D:09:FE:DA:04 IPADDR=192.168.91.250 NETMASK=255.255.255.0 NETWORK=192.168.91.0 ONBOOT=yes And here is the config for eth0:0 more etc/sysconfig/network-scripts/ifcfg-eth0:0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0:0 BOOTPROTO=static BROADCAST=10.10.191.255 DNS1=10.10.15.161 DNS2=10.10.18.36 GATEWAY=10.10.191.254 HWADDR=00:1D:09:FE:DA:04 IPADDR=10.10.191.210 NETMASK=255.255.255.0 NETWORK=10.39.191.0 ONPARENT=yes How would the resolv.conf file should change since there are two different gateways? Any other change needed?

    Read the article

  • What is the purpose of a boot priority sequence or order in BIOS

    - by rbeede
    A BIOS provides multiple options for specifying an order/priority to search for boot devices. Is there really much of a purpose now to have to specify more than one possible boot device? It would seem to me it is only useful when popping in an CD/DVD to install an OS after which the common scenario is to always boot from the hard drive unless something is broken. I'm curious as to why not simply have 1 option/device to set in the BIOS and expect the user to press a key to do alternate boot instead? Is there still a scenario for having the BIOS try multiple devices in a configured order?

    Read the article

  • Archlinux/atheros WLAN configuration troubles

    - by GrinReaper
    I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

    Read the article

  • One codec to rule them all

    - by AngryHacker
    I am streaming videos in my house via Windows Media Player Streaming, which is basically DLNA. So theoretically any DLNA compliant device can pick up the stream. However, I've quickly found that this is only one part of the solution. Over the years I've accumulated a ton of video-capable devices. While all these devices can see the Windows Media Player stream, they all speak in different codecs. And frankly, I am confused by codecs. In the beginning, I thought that the codecs were defined by the filename extension they carried (e.g. avi, mp4, wmv, etc...), but after further research, it looks like the extensions are simply containers. Inside an .avi file could reside several different codecs. So my question is this: is there a format/codec that plays equally well on any device.

    Read the article

  • Program shortcuts disappearing in Windows Mobile 2003, any way to get them back?

    - by Carlisle White
    I have a WM2003 device with some programs installed on it and a full backup created and saved to a SD card. If the device runs out of charge for some time (or the battery removed) everything is reseted back to defaults, so the custom programs and configs are gone. When this happens I used to restore the full backup to put everything back to normal again. But I've recently installed TomTom Navigator 7 and for some reason, its shortcut in the "Programs" section is not saved when creating a full backup (with the eBackup app provided) and the installation doesn't create a shortcut in the main screen (as version 6 used to do). Is there any way to make this shortcut persistent? Is there any way to create custom shortcuts in the programs section or in the main screen (preferably)? Thank you very much for your help, anything is welcomed.

    Read the article

< Previous Page | 202 203 204 205 206 207 208 209 210 211 212 213  | Next Page >