Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 211/664 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• wireshark not seeing all packets on WiFi

  - by Caffeine Coma

  I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

  Read the article

• Problem with intel chipset 4 serie and centos dealing with dual head

  - by Antoine

  I've a fujitsu lifebook S7220, it's been a while since i try to configure it to use a dual head with centos 5.4 x86_64. Everytime I try, the xserver crash... I've got an intel chipset mobile 4 serie (GMA 4500MHD, if I recall good!) When I do an lspci -v i've got these : 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 1800 [size=8] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 3 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0 Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 My question is, anyone already got this problem and how did you fix it? Thank you for your answer!

  Read the article

• Where are ghostscript options / switches documented?

  - by sdaau

  I know there is a Ghostscript option, for instance -dPDFSETTINGS=/screen - where is that documented? How can I see what other options it accepts, appart from screen? Also, -dMaxSubsetPct=100 - what does it do? I open man gs, search for PDFSET, I get "Pattern not found". I type in a search engine, I get a myriad of personal webpages, no documentation hits. Can anyone help with a link? Many thanks in advance, Cheers! EDIT: also see this related post: Querying Ghostscript for the default options/settings of an output device (such as 'pdfwrite' or 'tiffg4') - Stack Overflow ... for getting a list of supported options for a given device.

  Read the article

• RJ45 female to male fault

  - by GeoPhoenix

  i have the following - common - problem, on one end of the cable, there are RJ45 males T586 A which are connected to a 8-port switcher, on the other end, there supposed to be RJ45 females _T586 A which in turn will allow another RJ45 male to be connected. the commonly used color scheme was followed on males (having the head down) blue white blue orange white green green white orange brown white brown the problem i believe is located on female end of cable, which i try multiple time to follow the numbers designated by the module, which is the list above in reverse, and as listed resulting in no signal transmission. tried the T586B (both ends) for device to device once, but no results. Which is the proper way of handling this wiring? There were also additional RJ45 females with the numbers 6-5-4-3, but 1 to 8 isn't supposed to be used for this?

  Read the article

• How to netboot ubuntu running iniside VirtualBox on Mac Air

  - by murungu

  Having configured a virtual machine for Ubuntu on VirtualBox on my mac air I need to install Ubuntu OS itself. I have selected the hardrive as the primary boot device and the network as the secondary boot device, so I am not prompted to install an Ubuntu disk at boot time. It attempts to netboot but is unable to locate Ubuntu and cannot find anywhere in the configuration where I can explicitly specify where to find and Ubuntu image, so assume it reverts to some default location and fails. Has anybody out there ever successfully installed ubuntu on virtual box on their Mac Air? What steos did you take to get it right?

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• wifi routers and concurrent devices

  - by Joelio

  We have a Linksys WRT54G WiFi router in our office which was working great when we had 5-6 folks. Now on peak days we have 10-15 people, each with a computer, smartphone, etc, and an ooma VOIP device. On average 1-2 times a day I need to go hard reboot the router, and sometimes the border router (Cox-supplied device). I assume this is just because the router cant handle this many concurrent users. So my question is can these consumer routers handle this kind of load? If not, would adding more devices solve the problem, and how close proximity can I put 2 routers without having interference problems (our office area is not that big physically)?

  Read the article

• Dedicated Mouse and Keyboard on VirtualBox VM

  - by Myersguy

  Currently I am trying to run VirtualBox on my second monitor, with a dedicated mouse and keyboard. However, doing so has not proven easy. There has been times where the mouse works, but not the keyboard, vice versa, or nothing works at all. The biggest problem I am running into is this: When enabling the USB mouse and keyboard from the VM, I get an error: 'USB Device is busy with a previous request.' The only thing that is using second mouse and keyboard, however, is Windows. The other error I have received stated that the VM was unable to create a proxy for the device. Additionally, the VM occasionally will disable the secondary keyboard entirely, requiring me to unplug and replug it into my PC to re-enable it again. Keyboard auto-capture is disabled, and while a solution I was reading online stated to turn off mouse integration, that option is grayed out on my machine.

  Read the article

• What hardware is at physical address 0x80000000 on powerpc New World Macintosh?

  - by tinkerer

  Open Firmware device tree gives no clue what device might decode at physical address 0x80000000 to 0x8008200 on a G4 New World Macintosh. The mmu has three adjacent Virtual=Real translations for that block. They are the only address translations reported between the top or physical dram at 20000000 and the start of the PCI bridges at f0000000. (A possible clue is that frame-buffer-addr is reported as 9c008000 by Open Firmware, and that is not in the reported translation table either). I believe the architecture has been around since about 1999.

  Read the article

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• Bluetooth HSP support on Windows XP without third-party drivers

  - by joeforker

  Can the Windows XP built-in Bluetooth stack support HSP (headset profile) as an extra audio device, without third-party drivers?

  Read the article

• VMWare Workstation can't read CD/DVD drive

  - by Chris W

  A fresh install of VMWare Workstation 7 (7.1.1 build 282343) on Windows 7 64 bit. When I try to read a CD/DVD from a guest (either to install a fresh guest or to read a CD within an existing VM I get the following error: Cannot connect virtual device ide1:0 because no corresponding device is available on the host. I've tried fiddling with the IDE channels as well as tried SCSI with no joy. What am I missing? I can run ISOs fine but I don't want to have to convert everything to an ISO when I presume that this should just work fine.

  Read the article

• Debian Squeeze: Trackpad on EEE PC 1000HA acts like slate

  - by CarlF

  I'm using Debian on an Asus Eee PC 1000HA. It works flawlessly, except that the built-in trackpad acts as if it was a slate. That is, if I touch the upper-left quadrant of the trackpad, the mouse pointer "teleports" to the upper left of the netbook's screen. If I touch the bottom center, the pointer teleports to the bottom center of the screen. I currently have no xorg.conf. I have tried various settings for the mouse in xorg.confs that I created, and none of them did more than disable the trackpad entirely. The trackpad works perfectly in Windows XP (shipped with the Eee) and in Ubuntu. Debian works fine with the (USB) mouse. Any suggestions? Thanks.

  Read the article

• Windows 8.1 touchpad three-finger-multitouch gesture gone

  - by THEVAN3D

  Couple of days ago, i installed the Windows 8.1 Pro WMC and all of a sudden the touchpad gesture, which worked like a charm back in Win 8.1 preview, Win 8 and even Win 7, just stopped working. I am talking about the "Three Finger Flick" feature, which is used to go back and forward in folders and/or internet browsers at first i didnt even have the left edge pull feature, but then i added some values in this key into regedit, and now i have it [HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\ZoneConfig\TouchPadPS2\Left Edge Pull] I Googled that, i didnt know what to do by myself and i dont know where to write and what to write anything in order to get the three finger flick back too I installed various versions of drivers starting from about version 15 to the version 17.0.8.0 (the one that i currently have), and even though i have all the other gestures, taps and swipes working they are not in the device settings, there is no multitouch gestures in device settings so thats why i guess i have to write something in regedit, but again, i dont know what to write, and where to write. please help me if you can

  Read the article

• Windows 7 Line In Delay Issue

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• Forward Hostname via my router to another PC for debugging

  - by Markive

  Hi, My web service runs on for example: http://mydomain.com/mywebservice.asmx. This works great, but I have a PDA application which I want to debug it synchronising through this web service. Currently the only way I can do this is to debug the webservice running on the actual server which is far from ideal. What I would like to do is for any device connecting on my wireless network, if it requests mywebservice.asmx for this to forward the request to my development PC and for IIS to then handle the request and allow me to debug in Visual Studio. So device on the network that requests the hostname: mywebservice.asmx will his this PC.. I am at a loss to set this up on my router (Zoom ADSL X6), this is massively out of my scope but any help would be much appreciated

  Read the article

• Home Media Streaming Server

  - by sharjeel

  I'm looking for a Home Media Server which can stream videos to various devices including iPhone, iPad, Windows Machines, Android etc. I wouldn't want to install any client on any device; a web interface will be preferred. Also, it should be able to read videos of as many formats as possible and should stream by transcoding the resolution and format according to device's specifications. I have a fairly powerful machine on which I'm free to install Windows 7 or Linux. The streaming will be done over a g/n WiFi router or Ethernet locally. What is the suggested solution in my case?

  Read the article

• SQL Server 2008 - Error starting service - model.mdf not found?!

  - by alex

  my SQL server 2008 was running fine. About an hour ago, it suddenly stopped - the MSSQLSERVER service had stopped I right clicked, clicked start, and it said the service had started, and stopped I looked in the event log and saw these two errors: 17207 : udopen: Operating system error 3(error not found) during the creation/opening of physical device C:\Program Files\Microsoft SQL Server\MSSQL\data\model.mdf. 17204 : FCB::Open failed: Could not open device C:\Program Files\Microsoft SQL Server\MSSQL\data\model.mdf for virtual device number (VDN) 1. The model.mdf db has NEVER been in that location - i specified drive F: to use for data / log during install. I checked the SQL Configuration Manager, to try and set startup params, but SQL Server is not listed as one of the services..... EDIT: I've now moved the db to where it was looking for: C:\Program Files\Microsoft SQL Server\MSSQL\data\ directory. Now if I start the service, it still does not work - i get this error message in the log: Could not find row in sysindexes for database ID 3, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. Interestingly, i checked the error log - around the time users reported problems, there is this: 2010-01-08 17:11:26.44 spid51 Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. 2010-01-08 17:11:26.44 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'. 2010-01-08 17:11:26.44 spid51 Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install. 2010-01-08 17:11:26.44 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'. 2010-01-08 17:11:26.44 spid51 Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install. 2010-01-08 17:11:26.44 spid51 FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'. 2010-01-08 17:11:44.89 spid10s Service Broker manager has shut down. 2010-01-08 17:11:47.83 spid7s SQL Server is terminating in response to a 'stop' request from Service Control Manager. This is an informational message only. No user action is required. 2010-01-08 17:11:47.83 spid7s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

  Read the article

• "Always available offline" option missing on one network drive in Windows 7

  - by Rynardt

  My network setup at home has 2 network storage devices on the network. The one is for media content on a Popcorn Hour A-110 and the other is a D-Link DNS-320 in RAID 1 configuration for business files. When I access these network drives and right click a folder the following context menu appears for the A-110 device, but not for the D-link. I have tested this in both Windows 7 32bit and Windows Vista 64bit. In both instances the "Always available offline" option is only available for the A-110 storage device, and not for the D-link. How do I get this option for the D-link? Any advice or ideas are welcome.

  Read the article

• Ideas of subjects for Diplomas for students who are getting Network Engineering degree

  - by wik

  Looking for an ideas and solutions of possible problems to be used as a part of pre-diploma practice for students who getting Network Engineering degree. The important requirement: The problem must be solved by designing new device or software which incorporate(or improve) with existent device. It's could be something industry specific, particular problem, etc. Thanks. p.s. The time for writing diploma is also limited by few month here, i.e. it's will be hard to solve very complex problems, but would be nice to hear something fresh :)

  Read the article

• Repair Lacie 2Big Network 2

  - by Donier

  hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

  Read the article

• How to tell if you are connected to Wireless B, G or N?

  - by Raheel Khan

  I am using Windows 7 on all wired desktops and wireless laptops in my home network. I recently upgraded my Ethernet switch to Gigabit and instantly noticed an increase in throughput in wired devices. I also bought a Wireless-N WAP but with degredation in wireless file transfer speeds. I have been told that a number of reasons could affect wireless speeds including which WAP is used, how many wireless devices are connected, which security mode is used, etc. However, that remains irrelevant to my question. Each of my laptops claim to support Wireless-N but I cannot seem to figure out how to determine if the laptops are truly running Wireless-N or are connected to the WAP through some sort of mixed-mode. I do not have control of the WAP device so cannot tell what mode it is running in. Is there a way to tell which mode is being used and what the throughput is for each connected device without having access to the WAP interface?

  Read the article

• Prevent Windows 7 from unpluging External HDD

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• HDMI Audio drops out when display enters powersave

  - by Jared Tritsch

  I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >