preconference programs - Page 206

Benchmark Linq2SQL, Subsonic2, Subsonic3 - Any other ideas to make them faster ?

- by Aristos

I am working with Subsonic 2 more than 3 years now... After Linq appears and then Subsonic 3, I start thinking about moving to the new Linq futures that are connected to sql. I must say that I start move and port my subsonic 2 with SubSonic 3, and very soon I discover that the speed was so slow thats I didn't believe it - and starts all that tests. Then I test Linq2Sql and see also a delay - compare it with Subsonic 2. My question here is, especial for the linq2sql, and the up-coming dotnet version 4, what else can I do to speed it up ? What else on linq2sql settings, or classes, not on this code that I have used for my messures I place here the project that I make the tests, also the screen shots of the results. How I make the tests - and the accurate of my measures. I use only for my question Google chrome, because its difficult for me to show here a lot of other measures that I have done with more complex programs. This is the most simple one, I just measure the Data Read. How can I prove that. I make a simple Thread.Sleep(10 seconds) and see if I see that 10 seconds on Google Chrome Measure, and yes I see it. here are more test with this Sleep thead to see whats actually Chrome gives. 10 seconds delay 100 ms delay Zero delay There is only a small 15ms thats get on messure, is so small compare it with the rest of my tests that I do not care about. So what I measure I measure just the data read via each method - did not count the data or database delay, or any disk read or anything like that. Later on the image with the result I show that no disk activity exist on the measures See this image to see what really I measure and if this is correct Why I chose this kind of test Its simple, it's real, and it's near my real problem that I found the delay of subsonic 3 in real program with real data. Now lets tests the dals Start by see this image I have 4-5 calls on every method, the one after the other. The results are. For a loop of 100 times, ask for 5 Rows, one not exist, approximatively.. Simple adonet:81ms SubSonic 2 :210ms linq2sql :1.70sec linq2sql using CompiledQuery.Compile :239ms Subsonic 3 :15.00sec (wow - extreme slow) The project http://www.planethost.gr/DalSpeedTests.rar Can any one confirm this benchmark, or make any optimizations to help me out ? Other tests Some one publish here this link http://ormbattle.net/ (and then remove it - don not know why) In this page you can find a really useful advanced tests for all, except subsonic 2 and subsonic 3 that I have here ! Optimizing What I really ask here is if some one can now any trick how to optimize the DALs, not by changing the test code, but by changing the code and the settings on each dal. For example... Optimizing Linq2SQL I start search how to optimize Linq2sql and found this article, and maybe more exist. Finally I make the tricks from that page to run, and optimize the code using them all. The speed was near 1.50sec from 1.70.... big improvement, but still slow. Then I found a different way - same idea article, and wow ! the speed is blow up. Using this trick with CompiledQuery.Compile, the time from 1.5sec is now 239ms. Here is the code for the precompiled... Func<DataClassesDataContext, int, IQueryable<Product>> compiledQuery = CompiledQuery.Compile((DataClassesDataContext meta, int IdToFind) => (from myData in meta.Products where myData.ProductID.Equals(IdToFind) select myData)); StringBuilder Test = new StringBuilder(); int[] MiaSeira = { 5, 6, 10, 100, 7 }; using (DataClassesDataContext context = new DataClassesDataContext()) { context.ObjectTrackingEnabled = false; for (int i = 0; i < 100; i++) { foreach (int EnaID in MiaSeira) { var oFindThat2P = compiledQuery(context, EnaID); foreach (Product One in oFindThat2P) { Test.Append("<br />"); Test.Append(One.ProductName); } } } } Optimizing SubSonic 3 and problems I make many performance profiling, and start change the one after the other and the speed is better but still too slow. I post them on subsonic group but they ignore the problem, they say that everything is fast... Here is some capture of my profiling and delay points inside subsonic source code I have end up that subsonic3 make more call on the structure of the database rather than on data itself. Needs to reconsider the hole way of asking for data, and follow the subsonic2 idea if this is possible. Try to make precompile to subsonic 3 like I did in linq2Sql but fail for the moment... Optimizing SubSonic 2 After I discover that subsonic 3 is extreme slow, I start my checks on subsonic 2 - that I have never done before believing that is fast. (and it is) So its come up with some points that can be faster. For example there are many loops like this ones that actually is slow because of string manipulation and compares inside the loop. I must say to you that this code called million of times ! on a period of few minutes ! of data asking from the program. On small amount of tables and small fields maybe this is not a big think for some people, but on large amount of tables, the delay is even more. So I decide and optimize the subsonic 2 by my self, by replacing the string compares, with number compares! Simple. I do that almost on every point that profiler say that is slow. I change also all small points that can be even a little faster, and disable some not so used thinks. The results, 5% faster on NorthWind database, near 20% faster on my database with 250 tables. That is count with 500ms less in 10 seconds process on northwind, 100ms faster on my database on 500ms process time. I do not have captures to show you for that because I have made them with different code, different time, and track them down on paper. Anyway this is my story and my question on all that, what else do you know to make them even faster... For this measures I have use Subsonic 2.2 optimized by me, Subsonic 3.0.0.3 a little optimized by me, and Dot.Net 3.5

Read the article

Why html frame behave differently in Firefox and IE8 ?

- by Frank

I use html frame on my webiste, it's been running for I while, usually I only use Firefox to surf the net, my site looks and functions ok, but today I suddenly found IE8 has a problem with the frame on my site, if I click on the top menu items, it's supposed to display the content in the lower part of the frame, it does this correctly in Firefox, but in IE8, it displays the content in the upper part of the frame and replaces the menu items. In order to give more details, I'll include a simplified version of my html pages, at the top level there are two items, an index.html page and a file directory, all the pages except the index.html are in the directory, so it looks like this : index.html Dir_Docs 00_Home.html 00_Install_Java.html 00_Top_Menu.html 01_Home_Menu.html 01_Install_Java_Menu.html 10_Home_Welcome.html 10_How_To_Install_Java.html [ index.html ] <Html> <Head><Title>Java Applications : Tv_Panel, Java_Sound, Biz Manager and Web Academy</Title></Head> <Frameset Rows="36,*" Border=5 Bordercolor=#006B9F> <Frame Src=Dir_Docs/00_Top_Menu.html Frameborder=YES Scrolling=no Marginheight=1 Marginwidth=1> <Frame Src=Dir_Docs/00_Home.html Name=lower_frame Marginheight=1 Marginwidth=1> </Frameset> </Html> [ 00_Home.html ] <Html> <Head><Title>NMJava Application Development</Title></Head> <Frameset Cols="217,*" Align=center BorderColor="#006B9F"> <Frame Src=01_Home_Menu.html Frameborder=YES Name=side_menu Marginheight=1 Marginwidth=1> <Frame Src=10_Home_Welcome.html Name=content Marginheight=1 Marginwidth=1> </Frameset> </Html> [ 00_Install_Java.html ] <Html> <Head> <Title>Install Java</Title> </Head> <Frameset Cols="217,*" Align=center BorderColor="#006B9F"> <Frame Src=01_Install_Java_Menu.html Frameborder=YES Name=side_menu Marginheight=1 Marginwidth=1> <Frame Src=10_How_To_Install_Java.html Name=content Marginheight=1 Marginwidth=1> </Frameset> </Html> [ 00_Top_Menu.html ] <Html> <Head>Top Menu</Head> <Body> <Center> <Base target=lower_frame> <Table Border=1 Cellpadding=3 Width=100%> <Tr> <Td Align=Center Bgcolor=#3366FF><A Href=00_Home.html><Font Size=4 Color=White>Home</Font></A></Td> <Td Align=Center Bgcolor=#3366FF><A Href=00_Install_Java.html><Font Size=4 Color=White>Install Java</Font></A></Td> </Tr> </Table> </Center> </Body> </Html> [ 01_Home_Menu.html ] <Html> <Head><Title>Home Menu</Title></Head> <Base Target=content> <Body Bgcolor=#7799DD> <Center> <Table Border=1 Width=100%> <Tr><Td Align=center Bgcolor=#66AAFF><A Href=10_Home_Welcome.html>Welcome</A></Td></Tr> </Table> </Center> </Body> </Html> [ 01_Install_Java_Menu.html ] <Html> <Head><Title>Install Java</Title></Head> <Base Target=content> <Body Bgcolor=#7799DD> <Center> <Table Border=1 Width=100%> <Tr><Td Align=Center Bgcolor=#66AAFF><A Href=10_How_To_Install_Java.html>How To Install Java ?</A></Td></Tr> </Table> </Center> </Body> </Html> [ 10_Home_Welcome.html ] <Html> <Head><Title>NMJava For Software Development</Title></Head> <Body> <Center> <P> <Font Size=5 Color=blue>Welcome To NMJava For Software Development</Font> <P> </Center> </Body> </Html> [ 10_How_To_Install_Java.html ] <Html> <Head> <Title>Install Java</Title> </Head> <Body> <Center> <Br> <Font Size=5 Color=#0022AE><A Href=http://java.com/en/download/index.jsp>How To Install Java ?</A></Font> <Br> <P> <Table Width=90% Cellspacing=5 Cellpadding=5> <Tr><Td><Font Color=#0022AE> You need JRE 6 (Java Runtime Environment) to run the programs on this site. You may or may not have Java already installed on your PC, you can find out by going to the following site, if you don't have the latest version, you can install/upgrade it, it's free from Sun/Oracle at :<Font Size=4> <A Href=http://java.com/en/download/index.jsp>http://java.com/en/download/index.jsp</A></Font>.<P> </Font></Td></Tr> </Table> </Center> </Body> </Html> What's wrong with them, why the two browsers behave differently, and how to fix this ? My site is at : http://nmjava.com , in case you want to see more details. Frank

Read the article

Authoritative sources about Database vs. Flatfile decision

- by FastAl

<tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

Read the article

How do I prove I should put a table of values in source code instead of a database table?

- by FastAl

<tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

Read the article

Problems installing Memcache (PECL extension)

- by Petrus

I have installed memcached fine, and now I will need to install PECL extension memcache. Im running RedHat x86_64 es5. The installation gives me this: downloading memcache-2.2.6.tgz ... Starting to download memcache-2.2.6.tgz (35,957 bytes) ..........done: 35,957 bytes 11 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 Enable memcache session handler support? [yes] : Notice: Use of undefined constant STDIN - assumed 'STDIN' in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in /usr/lib/php/PEAR/Frontend/CLI.php on line 304 building in /root/tmp/pear-build-root/memcache-2.2.6 running: /root/tmp/pear/memcache/configure --enable-memcache-session=yes checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcache support... yes, shared checking whether to enable memcache session handler support... yes checking for the location of ZLIB... no checking for the location of zlib... /usr checking for session includes... /usr/include/php checking for memcache session support... enabled checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -o memcache.lo mkdir .libs cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -fPIC -DPIC -o .libs/memcache.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -o memcache_queue.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -fPIC -DPIC -o .libs/memcache_queue.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -o memcache_standard_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -fPIC -DPIC -o .libs/memcache_standard_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -o memcache_consistent_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -fPIC -DPIC -o .libs/memcache_consistent_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -o memcache_session.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -fPIC -DPIC -o .libs/memcache_session.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=link cc -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -o memcache.la -export-dynamic -avoid-version -prefer-pic -module -rpath /root/tmp/pear-build-root/memcache-2.2.6/modules memcache.lo memcache_queue.lo memcache_standard_hash.lo memcache_consistent_hash.lo memcache_session.lo cc -shared .libs/memcache.o .libs/memcache_queue.o .libs/memcache_standard_hash.o .libs/memcache_consistent_hash.o .libs/memcache_session.o -Wl,-soname -Wl,memcache.so -o .libs/memcache.so creating memcache.la (cd .libs && rm -f memcache.la && ln -s ../memcache.la memcache.la) /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=install cp ./memcache.la /root/tmp/pear-build-root/memcache-2.2.6/modules cp ./.libs/memcache.so /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.so cp ./.libs/memcache.lai /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.la PATH="$PATH:/sbin" ldconfig -n /root/tmp/pear-build-root/memcache-2.2.6/modules ---------------------------------------------------------------------- Libraries have been installed in: /root/tmp/pear-build-root/memcache-2.2.6/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. Don't forget to run 'make test'. running: make INSTALL_ROOT="/root/tmp/pear-build-root/install-memcache-2.2.6" install Installing shared extensions: /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/ running: find "/root/tmp/pear-build-root/install-memcache-2.2.6" | xargs ls -dils 361232 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6 361263 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr 361264 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib 361265 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php 361266 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions 361267 4 drwxr-xr-x 2 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626 361262 236 -rwxr-xr-x 1 root root 235575 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so Build process completed successfully Installing '/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.6 Extension memcache enabled in php.ini The memcache.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 I tried as well to install this extension "memcached 1.0.2 (PHP extension for interfacing with memcached via libmemcached library)" but it failed: downloading memcached-1.0.2.tgz ... Starting to download memcached-1.0.2.tgz (22,724 bytes) ........done: 22,724 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /root/tmp/pear-build-root/memcached-1.0.2 running: /root/tmp/pear/memcached/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcached support... yes, shared checking for libmemcached... yes, shared checking whether to enable memcached session handler support... yes checking whether to enable memcached igbinary serializer support... no checking for ZLIB... yes, shared checking for zlib location... /usr checking for session includes... /usr/include/php checking for memcached session support... enabled checking for memcached igbinary support... disabled checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/root/tmp/pear/memcached/configure' failed The memcached.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 Is there a kind soul out there that can solve this puzzle?

Read the article

The Incremental Architect’s Napkin - #5 - Design functions for extensibility and readability

- by Ralf Westphal

Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/08/24/the-incremental-architectrsquos-napkin---5---design-functions-for.aspx The functionality of programs is entered via Entry Points. So what we´re talking about when designing software is a bunch of functions handling the requests represented by and flowing in through those Entry Points. Designing software thus consists of at least three phases: Analyzing the requirements to find the Entry Points and their signatures Designing the functionality to be executed when those Entry Points get triggered Implementing the functionality according to the design aka coding I presume, you´re familiar with phase 1 in some way. And I guess you´re proficient in implementing functionality in some programming language. But in my experience developers in general are not experienced in going through an explicit phase 2. “Designing functionality? What´s that supposed to mean?” you might already have thought. Here´s my definition: To design functionality (or functional design for short) means thinking about… well, functions. You find a solution for what´s supposed to happen when an Entry Point gets triggered in terms of functions. A conceptual solution that is, because those functions only exist in your head (or on paper) during this phase. But you may have guess that, because it´s “design” not “coding”. And here is, what functional design is not: It´s not about logic. Logic is expressions (e.g. +, -, && etc.) and control statements (e.g. if, switch, for, while etc.). Also I consider calling external APIs as logic. It´s equally basic. It´s what code needs to do in order to deliver some functionality or quality. Logic is what´s doing that needs to be done by software. Transformations are either done through expressions or API-calls. And then there is alternative control flow depending on the result of some expression. Basically it´s just jumps in Assembler, sometimes to go forward (if, switch), sometimes to go backward (for, while, do). But calling your own function is not logic. It´s not necessary to produce any outcome. Functionality is not enhanced by adding functions (subroutine calls) to your code. Nor is quality increased by adding functions. No performance gain, no higher scalability etc. through functions. Functions are not relevant to functionality. Strange, isn´t it. What they are important for is security of investment. By introducing functions into our code we can become more productive (re-use) and can increase evolvability (higher unterstandability, easier to keep code consistent). That´s no small feat, however. Evolvable code can hardly be overestimated. That´s why to me functional design is so important. It´s at the core of software development. To sum this up: Functional design is on a level of abstraction above (!) logical design or algorithmic design. Functional design is only done until you get to a point where each function is so simple you are very confident you can easily code it. Functional design an logical design (which mostly is coding, but can also be done using pseudo code or flow charts) are complementary. Software needs both. If you start coding right away you end up in a tangled mess very quickly. Then you need back out through refactoring. Functional design on the other hand is bloodless without actual code. It´s just a theory with no experiments to prove it. But how to do functional design? An example of functional design Let´s assume a program to de-duplicate strings. The user enters a number of strings separated by commas, e.g. a, b, a, c, d, b, e, c, a. And the program is supposed to clear this list of all doubles, e.g. a, b, c, d, e. There is only one Entry Point to this program: the user triggers the de-duplication by starting the program with the string list on the command line C:\>deduplicate "a, b, a, c, d, b, e, c, a" a, b, c, d, e …or by clicking on a GUI button. This leads to the Entry Point function to get called. It´s the program´s main function in case of the batch version or a button click event handler in the GUI version. That´s the physical Entry Point so to speak. It´s inevitable. What then happens is a three step process: Transform the input data from the user into a request. Call the request handler. Transform the output of the request handler into a tangible result for the user. Or to phrase it a bit more generally: Accept input. Transform input into output. Present output. This does not mean any of these steps requires a lot of effort. Maybe it´s just one line of code to accomplish it. Nevertheless it´s a distinct step in doing the processing behind an Entry Point. Call it an aspect or a responsibility - and you will realize it most likely deserves a function of its own to satisfy the Single Responsibility Principle (SRP). Interestingly the above list of steps is already functional design. There is no logic, but nevertheless the solution is described - albeit on a higher level of abstraction than you might have done yourself. But it´s still on a meta-level. The application to the domain at hand is easy, though: Accept string list from command line De-duplicate Present de-duplicated strings on standard output And this concrete list of processing steps can easily be transformed into code:static void Main(string[] args) { var input = Accept_string_list(args); var output = Deduplicate(input); Present_deduplicated_string_list(output); } Instead of a big problem there are three much smaller problems now. If you think each of those is trivial to implement, then go for it. You can stop the functional design at this point. But maybe, just maybe, you´re not so sure how to go about with the de-duplication for example. Then just implement what´s easy right now, e.g.private static string Accept_string_list(string[] args) { return args[0]; } private static void Present_deduplicated_string_list( string[] output) { var line = string.Join(", ", output); Console.WriteLine(line); } Accept_string_list() contains logic in the form of an API-call. Present_deduplicated_string_list() contains logic in the form of an expression and an API-call. And then repeat the functional design for the remaining processing step. What´s left is the domain logic: de-duplicating a list of strings. How should that be done? Without any logic at our disposal during functional design you´re left with just functions. So which functions could make up the de-duplication? Here´s a suggestion: De-duplicate Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Processing step 2 obviously was the core of the solution. That´s where real creativity was needed. That´s the core of the domain. But now after this refinement the implementation of each step is easy again:private static string[] Parse_string_list(string input) { return input.Split(',') .Select(s => s.Trim()) .ToArray(); } private static Dictionary<string,object> Compile_unique_strings(string[] strings) { return strings.Aggregate( new Dictionary<string, object>(), (agg, s) => { agg[s] = null; return agg; }); } private static string[] Serialize_unique_strings( Dictionary<string,object> dict) { return dict.Keys.ToArray(); } With these three additional functions Main() now looks like this:static void Main(string[] args) { var input = Accept_string_list(args); var strings = Parse_string_list(input); var dict = Compile_unique_strings(strings); var output = Serialize_unique_strings(dict); Present_deduplicated_string_list(output); } I think that´s very understandable code: just read it from top to bottom and you know how the solution to the problem works. It´s a mirror image of the initial design: Accept string list from command line Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Present de-duplicated strings on standard output You can even re-generate the design by just looking at the code. Code and functional design thus are always in sync - if you follow some simple rules. But about that later. And as a bonus: all the functions making up the process are small - which means easy to understand, too. So much for an initial concrete example. Now it´s time for some theory. Because there is method to this madness ;-) The above has only scratched the surface. Introducing Flow Design Functional design starts with a given function, the Entry Point. Its goal is to describe the behavior of the program when the Entry Point is triggered using a process, not an algorithm. An algorithm consists of logic, a process on the other hand consists just of steps or stages. Each processing step transforms input into output or a side effect. Also it might access resources, e.g. a printer, a database, or just memory. Processing steps thus can rely on state of some sort. This is different from Functional Programming, where functions are supposed to not be stateful and not cause side effects.[1] In its simplest form a process can be written as a bullet point list of steps, e.g. Get data from user Output result to user Transform data Parse data Map result for output Such a compilation of steps - possibly on different levels of abstraction - often is the first artifact of functional design. It can be generated by a team in an initial design brainstorming. Next comes ordering the steps. What should happen first, what next etc.? Get data from user Parse data Transform data Map result for output Output result to user That´s great for a start into functional design. It´s better than starting to code right away on a given function using TDD. Please get me right: TDD is a valuable practice. But it can be unnecessarily hard if the scope of a functionn is too large. But how do you know beforehand without investing some thinking? And how to do this thinking in a systematic fashion? My recommendation: For any given function you´re supposed to implement first do a functional design. Then, once you´re confident you know the processing steps - which are pretty small - refine and code them using TDD. You´ll see that´s much, much easier - and leads to cleaner code right away. For more information on this approach I call “Informed TDD” read my book of the same title. Thinking before coding is smart. And writing down the solution as a bunch of functions possibly is the simplest thing you can do, I´d say. It´s more according to the KISS (Keep It Simple, Stupid) principle than returning constants or other trivial stuff TDD development often is started with. So far so good. A simple ordered list of processing steps will do to start with functional design. As shown in the above example such steps can easily be translated into functions. Moving from design to coding thus is simple. However, such a list does not scale. Processing is not always that simple to be captured in a list. And then the list is just text. Again. Like code. That means the design is lacking visuality. Textual representations need more parsing by your brain than visual representations. Plus they are limited in their “dimensionality”: text just has one dimension, it´s sequential. Alternatives and parallelism are hard to encode in text. In addition the functional design using numbered lists lacks data. It´s not visible what´s the input, output, and state of the processing steps. That´s why functional design should be done using a lightweight visual notation. No tool is necessary to draw such designs. Use pen and paper; a flipchart, a whiteboard, or even a napkin is sufficient. Visualizing processes The building block of the functional design notation is a functional unit. I mostly draw it like this: Something is done, it´s clear what goes in, it´s clear what comes out, and it´s clear what the processing step requires in terms of state or hardware. Whenever input flows into a functional unit it gets processed and output is produced and/or a side effect occurs. Flowing data is the driver of something happening. That´s why I call this approach to functional design Flow Design. It´s about data flow instead of control flow. Control flow like in algorithms is of no concern to functional design. Thinking about control flow simply is too low level. Once you start with control flow you easily get bogged down by tons of details. That´s what you want to avoid during design. Design is supposed to be quick, broad brush, abstract. It should give overview. But what about all the details? As Robert C. Martin rightly said: “Programming is abot detail”. Detail is a matter of code. Once you start coding the processing steps you designed you can worry about all the detail you want. Functional design does not eliminate all the nitty gritty. It just postpones tackling them. To me that´s also an example of the SRP. Function design has the responsibility to come up with a solution to a problem posed by a single function (Entry Point). And later coding has the responsibility to implement the solution down to the last detail (i.e. statement, API-call). TDD unfortunately mixes both responsibilities. It´s just coding - and thereby trying to find detailed implementations (green phase) plus getting the design right (refactoring). To me that´s one reason why TDD has failed to deliver on its promise for many developers. Using functional units as building blocks of functional design processes can be depicted very easily. Here´s the initial process for the example problem: For each processing step draw a functional unit and label it. Choose a verb or an “action phrase” as a label, not a noun. Functional design is about activities, not state or structure. Then make the output of an upstream step the input of a downstream step. Finally think about the data that should flow between the functional units. Write the data above the arrows connecting the functional units in the direction of the data flow. Enclose the data description in brackets. That way you can clearly see if all flows have already been specified. Empty brackets mean “no data is flowing”, but nevertheless a signal is sent. A name like “list” or “strings” in brackets describes the data content. Use lower case labels for that purpose. A name starting with an upper case letter like “String” or “Customer” on the other hand signifies a data type. If you like, you also can combine descriptions with data types by separating them with a colon, e.g. (list:string) or (strings:string[]). But these are just suggestions from my practice with Flow Design. You can do it differently, if you like. Just be sure to be consistent. Flows wired-up in this manner I call one-dimensional (1D). Each functional unit just has one input and/or one output. A functional unit without an output is possible. It´s like a black hole sucking up input without producing any output. Instead it produces side effects. A functional unit without an input, though, does make much sense. When should it start to work? What´s the trigger? That´s why in the above process even the first processing step has an input. If you like, view such 1D-flows as pipelines. Data is flowing through them from left to right. But as you can see, it´s not always the same data. It get´s transformed along its passage: (args) becomes a (list) which is turned into (strings). The Principle of Mutual Oblivion A very characteristic trait of flows put together from function units is: no functional units knows another one. They are all completely independent of each other. Functional units don´t know where their input is coming from (or even when it´s gonna arrive). They just specify a range of values they can process. And they promise a certain behavior upon input arriving. Also they don´t know where their output is going. They just produce it in their own time independent of other functional units. That means at least conceptually all functional units work in parallel. Functional units don´t know their “deployment context”. They now nothing about the overall flow they are place in. They are just consuming input from some upstream, and producing output for some downstream. That makes functional units very easy to test. At least as long as they don´t depend on state or resources. I call this the Principle of Mutual Oblivion (PoMO). Functional units are oblivious of others as well as an overall context/purpose. They are just parts of a whole focused on a single responsibility. How the whole is built, how a larger goal is achieved, is of no concern to the single functional units. By building software in such a manner, functional design interestingly follows nature. Nature´s building blocks for organisms also follow the PoMO. The cells forming your body do not know each other. Take a nerve cell “controlling” a muscle cell for example:[2] The nerve cell does not know anything about muscle cells, let alone the specific muscel cell it is “attached to”. Likewise the muscle cell does not know anything about nerve cells, let a lone a specific nerve cell “attached to” it. Saying “the nerve cell is controlling the muscle cell” thus only makes sense when viewing both from the outside. “Control” is a concept of the whole, not of its parts. Control is created by wiring-up parts in a certain way. Both cells are mutually oblivious. Both just follow a contract. One produces Acetylcholine (ACh) as output, the other consumes ACh as input. Where the ACh is going, where it´s coming from neither cell cares about. Million years of evolution have led to this kind of division of labor. And million years of evolution have produced organism designs (DNA) which lead to the production of these different cell types (and many others) and also to their co-location. The result: the overall behavior of an organism. How and why this happened in nature is a mystery. For our software, though, it´s clear: functional and quality requirements needs to be fulfilled. So we as developers have to become “intelligent designers” of “software cells” which we put together to form a “software organism” which responds in satisfying ways to triggers from it´s environment. My bet is: If nature gets complex organisms working by following the PoMO, who are we to not apply this recipe for success to our much simpler “machines”? So my rule is: Wherever there is functionality to be delivered, because there is a clear Entry Point into software, design the functionality like nature would do it. Build it from mutually oblivious functional units. That´s what Flow Design is about. In that way it´s even universal, I´d say. Its notation can also be applied to biology: Never mind labeling the functional units with nouns. That´s ok in Flow Design. You´ll do that occassionally for functional units on a higher level of abstraction or when their purpose is close to hardware. Getting a cockroach to roam your bedroom takes 1,000,000 nerve cells (neurons). Getting the de-duplication program to do its job just takes 5 “software cells” (functional units). Both, though, follow the same basic principle. Translating functional units into code Moving from functional design to code is no rocket science. In fact it´s straightforward. There are two simple rules: Translate an input port to a function. Translate an output port either to a return statement in that function or to a function pointer visible to that function. The simplest translation of a functional unit is a function. That´s what you saw in the above example. Functions are mutually oblivious. That why Functional Programming likes them so much. It makes them composable. Which is the reason, nature works according to the PoMO. Let´s be clear about one thing: There is no dependency injection in nature. For all of an organism´s complexity no DI container is used. Behavior is the result of smooth cooperation between mutually oblivious building blocks. Functions will often be the adequate translation for the functional units in your designs. But not always. Take for example the case, where a processing step should not always produce an output. Maybe the purpose is to filter input. Here the functional unit consumes words and produces words. But it does not pass along every word flowing in. Some words are swallowed. Think of a spell checker. It probably should not check acronyms for correctness. There are too many of them. Or words with no more than two letters. Such words are called “stop words”. In the above picture the optionality of the output is signified by the astrisk outside the brackets. It means: Any number of (word) data items can flow from the functional unit for each input data item. It might be none or one or even more. This I call a stream of data. Such behavior cannot be translated into a function where output is generated with return. Because a function always needs to return a value. So the output port is translated into a function pointer or continuation which gets passed to the subroutine when called:[3]void filter_stop_words( string word, Action<string> onNoStopWord) { if (...check if not a stop word...) onNoStopWord(word); } If you want to be nitpicky you might call such a function pointer parameter an injection. And technically you´re right. Conceptually, though, it´s not an injection. Because the subroutine is not functionally dependent on the continuation. Firstly continuations are procedures, i.e. subroutines without a return type. Remember: Flow Design is about unidirectional data flow. Secondly the name of the formal parameter is chosen in a way as to not assume anything about downstream processing steps. onNoStopWord describes a situation (or event) within the functional unit only. Translating output ports into function pointers helps keeping functional units mutually oblivious in cases where output is optional or produced asynchronically. Either pass the function pointer to the function upon call. Or make it global by putting it on the encompassing class. Then it´s called an event. In C# that´s even an explicit feature.class Filter { public void filter_stop_words( string word) { if (...check if not a stop word...) onNoStopWord(word); } public event Action<string> onNoStopWord; } When to use a continuation and when to use an event dependens on how a functional unit is used in flows and how it´s packed together with others into classes. You´ll see examples further down the Flow Design road. Another example of 1D functional design Let´s see Flow Design once more in action using the visual notation. How about the famous word wrap kata? Robert C. Martin has posted a much cited solution including an extensive reasoning behind his TDD approach. So maybe you want to compare it to Flow Design. The function signature given is:string WordWrap(string text, int maxLineLength) {...} That´s not an Entry Point since we don´t see an application with an environment and users. Nevertheless it´s a function which is supposed to provide a certain functionality. The text passed in has to be reformatted. The input is a single line of arbitrary length consisting of words separated by spaces. The output should consist of one or more lines of a maximum length specified. If a word is longer than a the maximum line length it can be split in multiple parts each fitting in a line. Flow Design Let´s start by brainstorming the process to accomplish the feat of reformatting the text. What´s needed? Words need to be assembled into lines Words need to be extracted from the input text The resulting lines need to be assembled into the output text Words too long to fit in a line need to be split Does sound about right? I guess so. And it shows a kind of priority. Long words are a special case. So maybe there is a hint for an incremental design here. First let´s tackle “average words” (words not longer than a line). Here´s the Flow Design for this increment: The the first three bullet points turned into functional units with explicit data added. As the signature requires a text is transformed into another text. See the input of the first functional unit and the output of the last functional unit. In between no text flows, but words and lines. That´s good to see because thereby the domain is clearly represented in the design. The requirements are talking about words and lines and here they are. But note the asterisk! It´s not outside the brackets but inside. That means it´s not a stream of words or lines, but lists or sequences. For each text a sequence of words is output. For each sequence of words a sequence of lines is produced. The asterisk is used to abstract from the concrete implementation. Like with streams. Whether the list of words gets implemented as an array or an IEnumerable is not important during design. It´s an implementation detail. Does any processing step require further refinement? I don´t think so. They all look pretty “atomic” to me. And if not… I can always backtrack and refine a process step using functional design later once I´ve gained more insight into a sub-problem. Implementation The implementation is straightforward as you can imagine. The processing steps can all be translated into functions. Each can be tested easily and separately. Each has a focused responsibility. And the process flow becomes just a sequence of function calls: Easy to understand. It clearly states how word wrapping works - on a high level of abstraction. And it´s easy to evolve as you´ll see. Flow Design - Increment 2 So far only texts consisting of “average words” are wrapped correctly. Words not fitting in a line will result in lines too long. Wrapping long words is a feature of the requested functionality. Whether it´s there or not makes a difference to the user. To quickly get feedback I decided to first implement a solution without this feature. But now it´s time to add it to deliver the full scope. Fortunately Flow Design automatically leads to code following the Open Closed Principle (OCP). It´s easy to extend it - instead of changing well tested code. How´s that possible? Flow Design allows for extension of functionality by inserting functional units into the flow. That way existing functional units need not be changed. The data flow arrow between functional units is a natural extension point. No need to resort to the Strategy Pattern. No need to think ahead where extions might need to be made in the future. I just “phase in” the remaining processing step: Since neither Extract words nor Reformat know of their environment neither needs to be touched due to the “detour”. The new processing step accepts the output of the existing upstream step and produces data compatible with the existing downstream step. Implementation - Increment 2 A trivial implementation checking the assumption if this works does not do anything to split long words. The input is just passed on: Note how clean WordWrap() stays. The solution is easy to understand. A developer looking at this code sometime in the future, when a new feature needs to be build in, quickly sees how long words are dealt with. Compare this to Robert C. Martin´s solution:[4] How does this solution handle long words? Long words are not even part of the domain language present in the code. At least I need considerable time to understand the approach. Admittedly the Flow Design solution with the full implementation of long word splitting is longer than Robert C. Martin´s. At least it seems. Because his solution does not cover all the “word wrap situations” the Flow Design solution handles. Some lines would need to be added to be on par, I guess. But even then… Is a difference in LOC that important as long as it´s in the same ball park? I value understandability and openness for extension higher than saving on the last line of code. Simplicity is not just less code, it´s also clarity in design. But don´t take my word for it. Try Flow Design on larger problems and compare for yourself. What´s the easier, more straightforward way to clean code? And keep in mind: You ain´t seen all yet ;-) There´s more to Flow Design than described in this chapter. In closing I hope I was able to give you a impression of functional design that makes you hungry for more. To me it´s an inevitable step in software development. Jumping from requirements to code does not scale. And it leads to dirty code all to quickly. Some thought should be invested first. Where there is a clear Entry Point visible, it´s functionality should be designed using data flows. Because with data flows abstraction is possible. For more background on why that´s necessary read my blog article here. For now let me point out to you - if you haven´t already noticed - that Flow Design is a general purpose declarative language. It´s “programming by intention” (Shalloway et al.). Just write down how you think the solution should work on a high level of abstraction. This breaks down a large problem in smaller problems. And by following the PoMO the solutions to those smaller problems are independent of each other. So they are easy to test. Or you could even think about getting them implemented in parallel by different team members. Flow Design not only increases evolvability, but also helps becoming more productive. All team members can participate in functional design. This goes beyon collective code ownership. We´re talking collective design/architecture ownership. Because with Flow Design there is a common visual language to talk about functional design - which is the foundation for all other design activities. PS: If you like what you read, consider getting my ebook “The Incremental Architekt´s Napkin”. It´s where I compile all the articles in this series for easier reading. I like the strictness of Function Programming - but I also find it quite hard to live by. And it certainly is not what millions of programmers are used to. Also to me it seems, the real world is full of state and side effects. So why give them such a bad image? That´s why functional design takes a more pragmatic approach. State and side effects are ok for processing steps - but be sure to follow the SRP. Don´t put too much of it into a single processing step. ? Image taken from www.physioweb.org ? My code samples are written in C#. C# sports typed function pointers called delegates. Action is such a function pointer type matching functions with signature void someName(T t). Other languages provide similar ways to work with functions as first class citizens - even Java now in version 8. I trust you find a way to map this detail of my translation to your favorite programming language. I know it works for Java, C++, Ruby, JavaScript, Python, Go. And if you´re using a Functional Programming language it´s of course a no brainer. ? Taken from his blog post “The Craftsman 62, The Dark Path”. ?

Read the article

You Might Be a DBA

- by BuckWoody

With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA buckwoody You have at least one set of scripts you won't share #youmightbeaDBA buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA buckwoody You have children older than the rest of your team #youmightbeaDBA buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA buckwoody You have at least one set of scripts you won't share #youmightbeaDBA buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA buckwoody Being paranoid is on your resume at the top #youmightbeaDBA buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA buckwoody Your spouse knows what "ETL" means #youmightbeaDBA buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA buckwoody You have more conference badges than clean socks #youmightbeaDBA buckwoody Your coffee mug says "It depends" #youmightbeaDBA buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA buckwoody You've used ebay to find production equipment #youmightbeaDBA buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA buckwoody You call aspirin "work vitamins" #youmightbeaDBA buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA buckwoody You call texting a "queuing system" #youmightbeaDBA buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA buckwoody You wish everything had a graphical query plan #youmightbeaDBA buckwoody You refactor your e-mails #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today. buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody * == bad #youmightbeaDBA buckwoody * == bad #youmightbeaDBA buckwoody There are just as many females in your technical field as males #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA buckwoody You think a millisecond is a really long time #youmightbeaDBA buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA buckwoody You know where the data is #youmightbeaDBA buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA buckwoody Holiday == "Maintenance Window" #youmightbeaDBA buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA buckwoody You capitalize SELECTed words #youmightbeaDBA buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA buckwoody Holiday == "Maintenance Window" #youmightbeaDBA buckwoody All Data Is MetaData means something to you #youmightbeaDBA buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA blakmk when you wake up dreaming about sql #youmightbeaDBA CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!) databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA databaseguy You care about latches and wait states. #youmightbeaDBA databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA databaseguy You read database statistics for the educational value. #youmightbeaDBA databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O) DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room? jamach09 If you refer to procreation as "Replication", #youmightbeaDBA. jamach09 If you think ORM is a four-letter word, #youmightbeaDBA JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA LadyRuna you always call the asterisk a "Star" #youmightbeaDBA LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA LadyRuna You receive more messages from servers than from friends #youmightbeaDBA LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator" markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends." markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster" MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA merv @buckwoody You HATE 3-way joins #youmightbeaDBA MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA. mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible! Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA onpnt Your servers haven't been rebooted in a year #youmightbeaDBA onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA onpnt You have made an SSIS package that is more than one step #youmightbeaDBA onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA onpnt You hope a girl asks you what your collation is #youmightbeaDBA onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory onpnt You do have backups and you know how to use them #youmightbeaDBA onpnt It's the network #youmightbeaDBA onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671 onpnt You sing SELECT statements in the shower #youmightbeaDBA onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA onpnt At time, SQL is your mistress #youmightbeaDBA onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs. ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA speedracer Developers make you twitch #youmightbeaDBA sqlagentman You know what X/1024*8 is. #YouMightBeADBA SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :) SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice! SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA SQLCraftsman Default Blame Acceptor #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA SQLCraftsman Default Blame Acceptor #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food") sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice) sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars sqljoe #youmightbeaDBA if you are proud of your small package SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind. sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA sqlrunner If you are happy with sub-second performance #youmightbeaDBA sqlrunner When you know the names of the NOC people AND their families #youmightbeadba sqlrunner When you know the names of the NOC people AND their families #youmightbeadba sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43 SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA SQLSoldier PSS has your number on speed dial. #youmightbeaDBA SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait... thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;) TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets... venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow.. venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets... venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China." Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

value types in the vm

- by john.rose

value types in the vm p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times} p.p2 {margin: 0.0px 0.0px 14.0px 0.0px; font: 14.0px Times} p.p3 {margin: 0.0px 0.0px 12.0px 0.0px; font: 14.0px Times} p.p4 {margin: 0.0px 0.0px 15.0px 0.0px; font: 14.0px Times} p.p5 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Courier} p.p6 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Courier; min-height: 17.0px} p.p7 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times; min-height: 18.0px} p.p8 {margin: 0.0px 0.0px 0.0px 36.0px; text-indent: -36.0px; font: 14.0px Times; min-height: 18.0px} p.p9 {margin: 0.0px 0.0px 12.0px 0.0px; font: 14.0px Times; min-height: 18.0px} p.p10 {margin: 0.0px 0.0px 12.0px 0.0px; font: 14.0px Times; color: #000000} li.li1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times} li.li7 {margin: 0.0px 0.0px 0.0px 0.0px; font: 14.0px Times; min-height: 18.0px} span.s1 {font: 14.0px Courier} span.s2 {color: #000000} span.s3 {font: 14.0px Courier; color: #000000} ol.ol1 {list-style-type: decimal} Or, enduring values for a changing world. Introduction A value type is a data type which, generally speaking, is designed for being passed by value in and out of methods, and stored by value in data structures. The only value types which the Java language directly supports are the eight primitive types. Java indirectly and approximately supports value types, if they are implemented in terms of classes. For example, both Integer and String may be viewed as value types, especially if their usage is restricted to avoid operations appropriate to Object. In this note, we propose a definition of value types in terms of a design pattern for Java classes, accompanied by a set of usage restrictions. We also sketch the relation of such value types to tuple types (which are a JVM-level notion), and point out JVM optimizations that can apply to value types. This note is a thought experiment to extend the JVM’s performance model in support of value types. The demonstration has two phases. Initially the extension can simply use design patterns, within the current bytecode architecture, and in today’s Java language. But if the performance model is to be realized in practice, it will probably require new JVM bytecode features, changes to the Java language, or both. We will look at a few possibilities for these new features. An Axiom of Value In the context of the JVM, a value type is a data type equipped with construction, assignment, and equality operations, and a set of typed components, such that, whenever two variables of the value type produce equal corresponding values for their components, the values of the two variables cannot be distinguished by any JVM operation. Here are some corollaries: A value type is immutable, since otherwise a copy could be constructed and the original could be modified in one of its components, allowing the copies to be distinguished. Changing the component of a value type requires construction of a new value. The equals and hashCode operations are strictly component-wise. If a value type is represented by a JVM reference, that reference cannot be successfully synchronized on, and cannot be usefully compared for reference equality. A value type can be viewed in terms of what it doesn’t do. We can say that a value type omits all value-unsafe operations, which could violate the constraints on value types. These operations, which are ordinarily allowed for Java object types, are pointer equality comparison (the acmp instruction), synchronization (the monitor instructions), all the wait and notify methods of class Object, and non-trivial finalize methods. The clone method is also value-unsafe, although for value types it could be treated as the identity function. Finally, and most importantly, any side effect on an object (however visible) also counts as an value-unsafe operation. A value type may have methods, but such methods must not change the components of the value. It is reasonable and useful to define methods like toString, equals, and hashCode on value types, and also methods which are specifically valuable to users of the value type. Representations of Value Value types have two natural representations in the JVM, unboxed and boxed. An unboxed value consists of the components, as simple variables. For example, the complex number x=(1+2i), in rectangular coordinate form, may be represented in unboxed form by the following pair of variables: /*Complex x = Complex.valueOf(1.0, 2.0):*/ double x_re = 1.0, x_im = 2.0; These variables might be locals, parameters, or fields. Their association as components of a single value is not defined to the JVM. Here is a sample computation which computes the norm of the difference between two complex numbers: double distance(/*Complex x:*/ double x_re, double x_im, /*Complex y:*/ double y_re, double y_im) { /*Complex z = x.minus(y):*/ double z_re = x_re - y_re, z_im = x_im - y_im; /*return z.abs():*/ return Math.sqrt(z_re*z_re + z_im*z_im); } A boxed representation groups component values under a single object reference. The reference is to a ‘wrapper class’ that carries the component values in its fields. (A primitive type can naturally be equated with a trivial value type with just one component of that type. In that view, the wrapper class Integer can serve as a boxed representation of value type int.) The unboxed representation of complex numbers is practical for many uses, but it fails to cover several major use cases: return values, array elements, and generic APIs. The two components of a complex number cannot be directly returned from a Java function, since Java does not support multiple return values. The same story applies to array elements: Java has no ’array of structs’ feature. (Double-length arrays are a possible workaround for complex numbers, but not for value types with heterogeneous components.) By generic APIs I mean both those which use generic types, like Arrays.asList and those which have special case support for primitive types, like String.valueOf and PrintStream.println. Those APIs do not support unboxed values, and offer some problems to boxed values. Any ’real’ JVM type should have a story for returns, arrays, and API interoperability. The basic problem here is that value types fall between primitive types and object types. Value types are clearly more complex than primitive types, and object types are slightly too complicated. Objects are a little bit dangerous to use as value carriers, since object references can be compared for pointer equality, and can be synchronized on. Also, as many Java programmers have observed, there is often a performance cost to using wrapper objects, even on modern JVMs. Even so, wrapper classes are a good starting point for talking about value types. If there were a set of structural rules and restrictions which would prevent value-unsafe operations on value types, wrapper classes would provide a good notation for defining value types. This note attempts to define such rules and restrictions. Let’s Start Coding Now it is time to look at some real code. Here is a definition, written in Java, of a complex number value type. @ValueSafe public final class Complex implements java.io.Serializable { // immutable component structure: public final double re, im; private Complex(double re, double im) { this.re = re; this.im = im; } // interoperability methods: public String toString() { return "Complex("+re+","+im+")"; } public List<Double> asList() { return Arrays.asList(re, im); } public boolean equals(Complex c) { return re == c.re && im == c.im; } public boolean equals(@ValueSafe Object x) { return x instanceof Complex && equals((Complex) x); } public int hashCode() { return 31*Double.valueOf(re).hashCode() + Double.valueOf(im).hashCode(); } // factory methods: public static Complex valueOf(double re, double im) { return new Complex(re, im); } public Complex changeRe(double re2) { return valueOf(re2, im); } public Complex changeIm(double im2) { return valueOf(re, im2); } public static Complex cast(@ValueSafe Object x) { return x == null ? ZERO : (Complex) x; } // utility methods and constants: public Complex plus(Complex c) { return new Complex(re+c.re, im+c.im); } public Complex minus(Complex c) { return new Complex(re-c.re, im-c.im); } public double abs() { return Math.sqrt(re*re + im*im); } public static final Complex PI = valueOf(Math.PI, 0.0); public static final Complex ZERO = valueOf(0.0, 0.0); } This is not a minimal definition, because it includes some utility methods and other optional parts. The essential elements are as follows: The class is marked as a value type with an annotation. The class is final, because it does not make sense to create subclasses of value types. The fields of the class are all non-private and final. (I.e., the type is immutable and structurally transparent.) From the supertype Object, all public non-final methods are overridden. The constructor is private. Beyond these bare essentials, we can observe the following features in this example, which are likely to be typical of all value types: One or more factory methods are responsible for value creation, including a component-wise valueOf method. There are utility methods for complex arithmetic and instance creation, such as plus and changeIm. There are static utility constants, such as PI. The type is serializable, using the default mechanisms. There are methods for converting to and from dynamically typed references, such as asList and cast. The Rules In order to use value types properly, the programmer must avoid value-unsafe operations. A helpful Java compiler should issue errors (or at least warnings) for code which provably applies value-unsafe operations, and should issue warnings for code which might be correct but does not provably avoid value-unsafe operations. No such compilers exist today, but to simplify our account here, we will pretend that they do exist. A value-safe type is any class, interface, or type parameter marked with the @ValueSafe annotation, or any subtype of a value-safe type. If a value-safe class is marked final, it is in fact a value type. All other value-safe classes must be abstract. The non-static fields of a value class must be non-public and final, and all its constructors must be private. Under the above rules, a standard interface could be helpful to define value types like Complex. Here is an example: @ValueSafe public interface ValueType extends java.io.Serializable { // All methods listed here must get redefined. // Definitions must be value-safe, which means // they may depend on component values only. List<? extends Object> asList(); int hashCode(); boolean equals(@ValueSafe Object c); String toString(); } //@ValueSafe inherited from supertype: public final class Complex implements ValueType { … The main advantage of such a conventional interface is that (unlike an annotation) it is reified in the runtime type system. It could appear as an element type or parameter bound, for facilities which are designed to work on value types only. More broadly, it might assist the JVM to perform dynamic enforcement of the rules for value types. Besides types, the annotation @ValueSafe can mark fields, parameters, local variables, and methods. (This is redundant when the type is also value-safe, but may be useful when the type is Object or another supertype of a value type.) Working forward from these annotations, an expression E is defined as value-safe if it satisfies one or more of the following: The type of E is a value-safe type. E names a field, parameter, or local variable whose declaration is marked @ValueSafe. E is a call to a method whose declaration is marked @ValueSafe. E is an assignment to a value-safe variable, field reference, or array reference. E is a cast to a value-safe type from a value-safe expression. E is a conditional expression E0 ? E1 : E2, and both E1 and E2 are value-safe. Assignments to value-safe expressions and initializations of value-safe names must take their values from value-safe expressions. A value-safe expression may not be the subject of a value-unsafe operation. In particular, it cannot be synchronized on, nor can it be compared with the “==” operator, not even with a null or with another value-safe type. In a program where all of these rules are followed, no value-type value will be subject to a value-unsafe operation. Thus, the prime axiom of value types will be satisfied, that no two value type will be distinguishable as long as their component values are equal. More Code To illustrate these rules, here are some usage examples for Complex: Complex pi = Complex.valueOf(Math.PI, 0); Complex zero = pi.changeRe(0); //zero = pi; zero.re = 0; ValueType vtype = pi; @SuppressWarnings("value-unsafe") Object obj = pi; @ValueSafe Object obj2 = pi; obj2 = new Object(); // ok List<Complex> clist = new ArrayList<Complex>(); clist.add(pi); // (ok assuming List.add param is @ValueSafe) List<ValueType> vlist = new ArrayList<ValueType>(); vlist.add(pi); // (ok) List<Object> olist = new ArrayList<Object>(); olist.add(pi); // warning: "value-unsafe" boolean z = pi.equals(zero); boolean z1 = (pi == zero); // error: reference comparison on value type boolean z2 = (pi == null); // error: reference comparison on value type boolean z3 = (pi == obj2); // error: reference comparison on value type synchronized (pi) { } // error: synch of value, unpredictable result synchronized (obj2) { } // unpredictable result Complex qq = pi; qq = null; // possible NPE; warning: “null-unsafe" qq = (Complex) obj; // warning: “null-unsafe" qq = Complex.cast(obj); // OK @SuppressWarnings("null-unsafe") Complex empty = null; // possible NPE qq = empty; // possible NPE (null pollution) The Payoffs It follows from this that either the JVM or the java compiler can replace boxed value-type values with unboxed ones, without affecting normal computations. Fields and variables of value types can be split into their unboxed components. Non-static methods on value types can be transformed into static methods which take the components as value parameters. Some common questions arise around this point in any discussion of value types. Why burden the programmer with all these extra rules? Why not detect programs automagically and perform unboxing transparently? The answer is that it is easy to break the rules accidently unless they are agreed to by the programmer and enforced. Automatic unboxing optimizations are tantalizing but (so far) unreachable ideal. In the current state of the art, it is possible exhibit benchmarks in which automatic unboxing provides the desired effects, but it is not possible to provide a JVM with a performance model that assures the programmer when unboxing will occur. This is why I’m writing this note, to enlist help from, and provide assurances to, the programmer. Basically, I’m shooting for a good set of user-supplied “pragmas” to frame the desired optimization. Again, the important thing is that the unboxing must be done reliably, or else programmers will have no reason to work with the extra complexity of the value-safety rules. There must be a reasonably stable performance model, wherein using a value type has approximately the same performance characteristics as writing the unboxed components as separate Java variables. There are some rough corners to the present scheme. Since Java fields and array elements are initialized to null, value-type computations which incorporate uninitialized variables can produce null pointer exceptions. One workaround for this is to require such variables to be null-tested, and the result replaced with a suitable all-zero value of the value type. That is what the “cast” method does above. Generically typed APIs like List<T> will continue to manipulate boxed values always, at least until we figure out how to do reification of generic type instances. Use of such APIs will elicit warnings until their type parameters (and/or relevant members) are annotated or typed as value-safe. Retrofitting List<T> is likely to expose flaws in the present scheme, which we will need to engineer around. Here are a couple of first approaches: public interface java.util.List<@ValueSafe T> extends Collection<T> { … public interface java.util.List<T extends Object|ValueType> extends Collection<T> { … (The second approach would require disjunctive types, in which value-safety is “contagious” from the constituent types.) With more transformations, the return value types of methods can also be unboxed. This may require significant bytecode-level transformations, and would work best in the presence of a bytecode representation for multiple value groups, which I have proposed elsewhere under the title “Tuples in the VM”. But for starters, the JVM can apply this transformation under the covers, to internally compiled methods. This would give a way to express multiple return values and structured return values, which is a significant pain-point for Java programmers, especially those who work with low-level structure types favored by modern vector and graphics processors. The lack of multiple return values has a strong distorting effect on many Java APIs. Even if the JVM fails to unbox a value, there is still potential benefit to the value type. Clustered computing systems something have copy operations (serialization or something similar) which apply implicitly to command operands. When copying JVM objects, it is extremely helpful to know when an object’s identity is important or not. If an object reference is a copied operand, the system may have to create a proxy handle which points back to the original object, so that side effects are visible. Proxies must be managed carefully, and this can be expensive. On the other hand, value types are exactly those types which a JVM can “copy and forget” with no downside. Array types are crucial to bulk data interfaces. (As data sizes and rates increase, bulk data becomes more important than scalar data, so arrays are definitely accompanying us into the future of computing.) Value types are very helpful for adding structure to bulk data, so a successful value type mechanism will make it easier for us to express richer forms of bulk data. Unboxing arrays (i.e., arrays containing unboxed values) will provide better cache and memory density, and more direct data movement within clustered or heterogeneous computing systems. They require the deepest transformations, relative to today’s JVM. There is an impedance mismatch between value-type arrays and Java’s covariant array typing, so compromises will need to be struck with existing Java semantics. It is probably worth the effort, since arrays of unboxed value types are inherently more memory-efficient than standard Java arrays, which rely on dependent pointer chains. It may be sufficient to extend the “value-safe” concept to array declarations, and allow low-level transformations to change value-safe array declarations from the standard boxed form into an unboxed tuple-based form. Such value-safe arrays would not be convertible to Object[] arrays. Certain connection points, such as Arrays.copyOf and System.arraycopy might need additional input/output combinations, to allow smooth conversion between arrays with boxed and unboxed elements. Alternatively, the correct solution may have to wait until we have enough reification of generic types, and enough operator overloading, to enable an overhaul of Java arrays. Implicit Method Definitions The example of class Complex above may be unattractively complex. I believe most or all of the elements of the example class are required by the logic of value types. If this is true, a programmer who writes a value type will have to write lots of error-prone boilerplate code. On the other hand, I think nearly all of the code (except for the domain-specific parts like plus and minus) can be implicitly generated. Java has a rule for implicitly defining a class’s constructor, if no it defines no constructors explicitly. Likewise, there are rules for providing default access modifiers for interface members. Because of the highly regular structure of value types, it might be reasonable to perform similar implicit transformations on value types. Here’s an example of a “highly implicit” definition of a complex number type: public class Complex implements ValueType { // implicitly final public double re, im; // implicitly public final //implicit methods are defined elementwise from te fields: // toString, asList, equals(2), hashCode, valueOf, cast //optionally, explicit methods (plus, abs, etc.) would go here } In other words, with the right defaults, a simple value type definition can be a one-liner. The observant reader will have noticed the similarities (and suitable differences) between the explicit methods above and the corresponding methods for List<T>. Another way to abbreviate such a class would be to make an annotation the primary trigger of the functionality, and to add the interface(s) implicitly: public @ValueType class Complex { … // implicitly final, implements ValueType (But to me it seems better to communicate the “magic” via an interface, even if it is rooted in an annotation.) Implicitly Defined Value Types So far we have been working with nominal value types, which is to say that the sequence of typed components is associated with a name and additional methods that convey the intention of the programmer. A simple ordered pair of floating point numbers can be variously interpreted as (to name a few possibilities) a rectangular or polar complex number or Cartesian point. The name and the methods convey the intended meaning. But what if we need a truly simple ordered pair of floating point numbers, without any further conceptual baggage? Perhaps we are writing a method (like “divideAndRemainder”) which naturally returns a pair of numbers instead of a single number. Wrapping the pair of numbers in a nominal type (like “QuotientAndRemainder”) makes as little sense as wrapping a single return value in a nominal type (like “Quotient”). What we need here are structural value types commonly known as tuples. For the present discussion, let us assign a conventional, JVM-friendly name to tuples, roughly as follows: public class java.lang.tuple.$DD extends java.lang.tuple.Tuple { double $1, $2; } Here the component names are fixed and all the required methods are defined implicitly. The supertype is an abstract class which has suitable shared declarations. The name itself mentions a JVM-style method parameter descriptor, which may be “cracked” to determine the number and types of the component fields. The odd thing about such a tuple type (and structural types in general) is it must be instantiated lazily, in response to linkage requests from one or more classes that need it. The JVM and/or its class loaders must be prepared to spin a tuple type on demand, given a simple name reference, $xyz, where the xyz is cracked into a series of component types. (Specifics of naming and name mangling need some tasteful engineering.) Tuples also seem to demand, even more than nominal types, some support from the language. (This is probably because notations for non-nominal types work best as combinations of punctuation and type names, rather than named constructors like Function3 or Tuple2.) At a minimum, languages with tuples usually (I think) have some sort of simple bracket notation for creating tuples, and a corresponding pattern-matching syntax (or “destructuring bind”) for taking tuples apart, at least when they are parameter lists. Designing such a syntax is no simple thing, because it ought to play well with nominal value types, and also with pre-existing Java features, such as method parameter lists, implicit conversions, generic types, and reflection. That is a task for another day. Other Use Cases Besides complex numbers and simple tuples there are many use cases for value types. Many tuple-like types have natural value-type representations. These include rational numbers, point locations and pixel colors, and various kinds of dates and addresses. Other types have a variable-length ‘tail’ of internal values. The most common example of this is String, which is (mathematically) a sequence of UTF-16 character values. Similarly, bit vectors, multiple-precision numbers, and polynomials are composed of sequences of values. Such types include, in their representation, a reference to a variable-sized data structure (often an array) which (somehow) represents the sequence of values. The value type may also include ’header’ information. Variable-sized values often have a length distribution which favors short lengths. In that case, the design of the value type can make the first few values in the sequence be direct ’header’ fields of the value type. In the common case where the header is enough to represent the whole value, the tail can be a shared null value, or even just a null reference. Note that the tail need not be an immutable object, as long as the header type encapsulates it well enough. This is the case with String, where the tail is a mutable (but never mutated) character array. Field types and their order must be a globally visible part of the API. The structure of the value type must be transparent enough to have a globally consistent unboxed representation, so that all callers and callees agree about the type and order of components that appear as parameters, return types, and array elements. This is a trade-off between efficiency and encapsulation, which is forced on us when we remove an indirection enjoyed by boxed representations. A JVM-only transformation would not care about such visibility, but a bytecode transformation would need to take care that (say) the components of complex numbers would not get swapped after a redefinition of Complex and a partial recompile. Perhaps constant pool references to value types need to declare the field order as assumed by each API user. This brings up the delicate status of private fields in a value type. It must always be possible to load, store, and copy value types as coordinated groups, and the JVM performs those movements by moving individual scalar values between locals and stack. If a component field is not public, what is to prevent hostile code from plucking it out of the tuple using a rogue aload or astore instruction? Nothing but the verifier, so we may need to give it more smarts, so that it treats value types as inseparable groups of stack slots or locals (something like long or double). My initial thought was to make the fields always public, which would make the security problem moot. But public is not always the right answer; consider the case of String, where the underlying mutable character array must be encapsulated to prevent security holes. I believe we can win back both sides of the tradeoff, by training the verifier never to split up the components in an unboxed value. Just as the verifier encapsulates the two halves of a 64-bit primitive, it can encapsulate the the header and body of an unboxed String, so that no code other than that of class String itself can take apart the values. Similar to String, we could build an efficient multi-precision decimal type along these lines: public final class DecimalValue extends ValueType { protected final long header; protected private final BigInteger digits; public DecimalValue valueOf(int value, int scale) { assert(scale >= 0); return new DecimalValue(((long)value << 32) + scale, null); } public DecimalValue valueOf(long value, int scale) { if (value == (int) value) return valueOf((int)value, scale); return new DecimalValue(-scale, new BigInteger(value)); } } Values of this type would be passed between methods as two machine words. Small values (those with a significand which fits into 32 bits) would be represented without any heap data at all, unless the DecimalValue itself were boxed. (Note the tension between encapsulation and unboxing in this case. It would be better if the header and digits fields were private, but depending on where the unboxing information must “leak”, it is probably safer to make a public revelation of the internal structure.) Note that, although an array of Complex can be faked with a double-length array of double, there is no easy way to fake an array of unboxed DecimalValues. (Either an array of boxed values or a transposed pair of homogeneous arrays would be reasonable fallbacks, in a current JVM.) Getting the full benefit of unboxing and arrays will require some new JVM magic. Although the JVM emphasizes portability, system dependent code will benefit from using machine-level types larger than 64 bits. For example, the back end of a linear algebra package might benefit from value types like Float4 which map to stock vector types. This is probably only worthwhile if the unboxing arrays can be packed with such values. More Daydreams A more finely-divided design for dynamic enforcement of value safety could feature separate marker interfaces for each invariant. An empty marker interface Unsynchronizable could cause suitable exceptions for monitor instructions on objects in marked classes. More radically, a Interchangeable marker interface could cause JVM primitives that are sensitive to object identity to raise exceptions; the strangest result would be that the acmp instruction would have to be specified as raising an exception. @ValueSafe public interface ValueType extends java.io.Serializable, Unsynchronizable, Interchangeable { … public class Complex implements ValueType { // inherits Serializable, Unsynchronizable, Interchangeable, @ValueSafe … It seems possible that Integer and the other wrapper types could be retro-fitted as value-safe types. This is a major change, since wrapper objects would be unsynchronizable and their references interchangeable. It is likely that code which violates value-safety for wrapper types exists but is uncommon. It is less plausible to retro-fit String, since the prominent operation String.intern is often used with value-unsafe code. We should also reconsider the distinction between boxed and unboxed values in code. The design presented above obscures that distinction. As another thought experiment, we could imagine making a first class distinction in the type system between boxed and unboxed representations. Since only primitive types are named with a lower-case initial letter, we could define that the capitalized version of a value type name always refers to the boxed representation, while the initial lower-case variant always refers to boxed. For example: complex pi = complex.valueOf(Math.PI, 0); Complex boxPi = pi; // convert to boxed myList.add(boxPi); complex z = myList.get(0); // unbox Such a convention could perhaps absorb the current difference between int and Integer, double and Double. It might also allow the programmer to express a helpful distinction among array types. As said above, array types are crucial to bulk data interfaces, but are limited in the JVM. Extending arrays beyond the present limitations is worth thinking about; for example, the Maxine JVM implementation has a hybrid object/array type. Something like this which can also accommodate value type components seems worthwhile. On the other hand, does it make sense for value types to contain short arrays? And why should random-access arrays be the end of our design process, when bulk data is often sequentially accessed, and it might make sense to have heterogeneous streams of data as the natural “jumbo” data structure. These considerations must wait for another day and another note. More Work It seems to me that a good sequence for introducing such value types would be as follows: Add the value-safety restrictions to an experimental version of javac. Code some sample applications with value types, including Complex and DecimalValue. Create an experimental JVM which internally unboxes value types but does not require new bytecodes to do so. Ensure the feasibility of the performance model for the sample applications. Add tuple-like bytecodes (with or without generic type reification) to a major revision of the JVM, and teach the Java compiler to switch in the new bytecodes without code changes. A staggered roll-out like this would decouple language changes from bytecode changes, which is always a convenient thing. A similar investigation should be applied (concurrently) to array types. In this case, it seems to me that the starting point is in the JVM: Add an experimental unboxing array data structure to a production JVM, perhaps along the lines of Maxine hybrids. No bytecode or language support is required at first; everything can be done with encapsulated unsafe operations and/or method handles. Create an experimental JVM which internally unboxes value types but does not require new bytecodes to do so. Ensure the feasibility of the performance model for the sample applications. Add tuple-like bytecodes (with or without generic type reification) to a major revision of the JVM, and teach the Java compiler to switch in the new bytecodes without code changes. That’s enough musing me for now. Back to work!

Read the article

DirectX works for 64-bit but not 32-bit

- by dtbarne

I'm trying to play a game (Civilization 5) which was previously working but no longer. I believe I've narrowed it down to a DirectX issue because I get an error running dxdiag.exe in 32 bit mode. My goal (at least I believe) is to get Direct3D Acceleration "Enabled" in dxdiag (as it is in 64 bit dxdiag). A very similar issue is here: http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/direct3d-acceleration-is-not-available-in-windows/4c345e6e-dc68-e011-8dfc-68b599b31bf5?page=1 The proposed answer, which looks very promising, doesn't seem to work for me. Like other users in that thread, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Direct3D\Drivers does not have a SoftwareOnly key to change. I even tried manually adding it as a string and dword, to no avail. I have a NVIDIA GeForce GT 525M, and before you ask, yes I've tried updating (also uninstalling, reinstalling) my drivers. I've also tried doing the same with DirectX (and Civilization 5 for that matter). Been debugging for some 4+ hours now after a full day of work and I've run out of ideas. I'm hoping somebody knows the solution here! :) Here's what I see when I open dxdiag: DxDiag has detected that there mgiht have been a problem accessing Direct3D the last time this program was used. Would you like to bypass Direct3D this time? No - Crash Yes - Works, but in Display tab: DirectDraw Acceleration: Disabled Direct3D Acceleration: Not Available AGP Texture Acceleration: Not Available If I click "Run 64-bit DxDiag", all three are "Enabled". I should also note that I've tried the following steps as Microsoft suggests, but I'm not able to do so as the "Change Settings" button is disabled. Some programs run very slowly—or not at all—unless Microsoft DirectDraw or Direct3D hardware acceleration is turned on. To determine this, click the Display tab, and then under DirectX Features, check to see whether DirectDraw, Direct3D, and AGP Texture Acceleration appear as Enabled. If not, try turning on hardware acceleration. Click to open Screen Resolution. Click Advanced settings. Click the Troubleshoot tab, and then click Change settings. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. Move the Hardware Acceleration slider to Full. Full dxdiag dump: ------------------ System Information ------------------ Time of this report: 11/8/2012, 23:13:24 Machine name: DTBARNE Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: Dell System XPS L502X BIOS: Default System BIOS Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz Memory: 8192MB RAM Available OS Memory: 8086MB RAM Page File: 2466MB used, 13704MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7601.17514 32bit Unicode DxDiag Previously: Crashed in Direct3D (stage 2). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Intel(R) HD Graphics 3000 Manufacturer: Chip type: DAC type: Device Key: Enum\PCI\VEN_8086&DEV_0126&SUBSYS_04B61028&REV_09 Display Memory: Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1920 x 1080 (32 bit) (60Hz) Monitor Name: Generic PnP Monitor Monitor Model: Monitor Id: Native Mode: Output Type: Driver Name: Driver File Version: () Driver Version: DDI Version: Driver Model: WDDM 1.1 Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: Vendor ID: Device ID: SubSys ID: Revision ID: Driver Strong Name: oem11.inf:IntelGfx.NTamd64.6.0:iSNBM0:8.15.10.2696:pci\ven_8086&dev_0126&subsys_04b61028 Rank Of Driver: 00E60001 Video Accel: Deinterlace Caps: n/a D3D9 Overlay: DXVA-HD: DDraw Status: Disabled D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (High Definition Audio Device) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0665&SUBSYS_102804B6&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 11/20/2010 22:23:47, 350208 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Digital Audio (S/PDIF) (High Definition Audio Device) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0665&SUBSYS_102804B6&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 11/20/2010 22:23:47, 350208 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (High Definition Audio Device) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail Date and Size: 11/20/2010 22:23:47, 350208 bytes Cap Flags: 0x1 Format Flags: 0xFFFFF ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x8086, 0x1C26 | Matching Device ID: usb\root_hub20 | Service: usbhub | +-+ Generic USB Hub | | Vendor/Product ID: 0x8087, 0x0024 | | Location: Port_#0001.Hub_#0002 | | Matching Device ID: usb\class_09 | | Service: usbhub ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Synaptics PS/2 Port TouchPad | Matching Device ID: *dll04b6 | Upper Filters: SynTP | Service: i8042prt | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 26.2 GB Total Space: 122.0 GB File System: NTFS Model: M4-CT128M4SSD2 ATA Device Drive: D: Model: Optiarc DVDRWBD BC-5540H ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes -------------- System Devices -------------- Name: High Definition Audio Controller Device ID: PCI\VEN_8086&DEV_1C20&SUBSYS_04B61028&REV_05\3&11583659&0&D8 Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_8086&DEV_0104&SUBSYS_04B61028&REV_09\3&11583659&0&00 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C1A&SUBSYS_04B61028&REV_B5\3&11583659&0&E5 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_0101&SUBSYS_20108086&REV_09\3&11583659&0&08 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C18&SUBSYS_04B61028&REV_B5\3&11583659&0&E4 Driver: n/a Name: Intel(R) Centrino(R) Advanced-N 6230 Device ID: PCI\VEN_8086&DEV_0091&SUBSYS_52218086&REV_34\4&2634DE8D&0&00E1 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_8086&DEV_1C4B&SUBSYS_04B61028&REV_05\3&11583659&0&F8 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C16&SUBSYS_04B61028&REV_B5\3&11583659&0&E3 Driver: n/a Name: Realtek PCIe GBE Family Controller Device ID: PCI\VEN_10EC&DEV_8168&SUBSYS_04B61028&REV_06\4&109EAB2F&0&00E5 Driver: n/a Name: Intel(R) Management Engine Interface Device ID: PCI\VEN_8086&DEV_1C3A&SUBSYS_04B61028&REV_04\3&11583659&0&B0 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C12&SUBSYS_04B61028&REV_B5\3&11583659&0&E1 Driver: n/a Name: NVIDIA GeForce GT 525M Device ID: PCI\VEN_10DE&DEV_0DF5&SUBSYS_04B61028&REV_A1\4&4DCA75F&0&0008 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_8086&DEV_1C2D&SUBSYS_04B61028&REV_05\3&11583659&0&D0 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C10&SUBSYS_04B61028&REV_B5\3&11583659&0&E0 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_8086&DEV_1C26&SUBSYS_04B61028&REV_05\3&11583659&0&E8 Driver: n/a Name: Standard AHCI 1.0 Serial ATA Controller Device ID: PCI\VEN_8086&DEV_1C03&SUBSYS_04B61028&REV_05\3&11583659&0&FA Driver: n/a Name: SM Bus Controller Device ID: PCI\VEN_8086&DEV_1C22&SUBSYS_04B61028&REV_05\3&11583659&0&FB Driver: n/a Name: Intel(R) HD Graphics 3000 Device ID: PCI\VEN_8086&DEV_0126&SUBSYS_04B61028&REV_09\3&11583659&0&10 Driver: n/a Name: Renesas Electronics USB 3.0 Host Controller Device ID: PCI\VEN_1033&DEV_0194&SUBSYS_04B61028&REV_04\4&3494AC3A&0&00E3 Driver: n/a ------------------ DirectShow Filters ------------------ DirectShow Filters: WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514 WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514 WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514 MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385 Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385 WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514 WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514 Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385 Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385 DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514 Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713 WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514 Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514 AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713 VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713 SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528 Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000 AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528 StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528 MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713 MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713 SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514 MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528 Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514 SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528 Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514 Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713 MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713 DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514 Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713 Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514 ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713 Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713 MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528 Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835 Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713 Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713 VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514 WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514 VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514 File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514 iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514 iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514 DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835 Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835 AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713 RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll, Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514 WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514 MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528 DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514 SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514 Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514 MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514 Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514 StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528 Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514 Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835 AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713 AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713 Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713 Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000 StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528 AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514 Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713 File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713 File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713 Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514 Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514 BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669 MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713 WDM Streaming Tee/Splitter Devices: Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Video Compressors: WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385 WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385 MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385 DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514 MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713 Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514 Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514 Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514 Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514 Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514 Audio Compressors: WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385 WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385 IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713 CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713 CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713 MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713 Audio Capture Sources: Microphone (High Definition Aud,0x00200000,0,0,qcap.dll,6.06.7601.17514 PBDA CP Filters: PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528 PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528 PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528 Midi Renderers: Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713 Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713 WDM Streaming Capture Devices: HD Audio Microphone 2,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Integrated Webcam,0x00200000,1,2,ksproxy.ax,6.01.7601.17514 WDM Streaming Rendering Devices: HD Audio Headphone/Speakers,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 BDA Network Providers: Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514 Video Capture Sources: Integrated Webcam,0x00200000,1,2,ksproxy.ax,6.01.7601.17514 Multi-Instance Capable VBI Codecs: VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514 BDA Transport Information Renderers: BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669 MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514 BDA CP/CA Filters: Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708 Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708 PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708 XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708 WDM Streaming Communication Transforms: Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Audio Renderers: Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713 Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713 Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713 Digital Audio (S/PDIF) (High De,0x00200000,1,0,quartz.dll,6.06.7601.17713 DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713 DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713 --------------- EVR Power Information --------------- Current Setting: {651288E5-A7ED-4076-A96B-6CC62D848FE1} (Balanced) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

Read the article

256 Windows Azure Worker Roles, Windows Kinect and a 90's Text-Based Ray-Tracer

- by Alan Smith

For a couple of years I have been demoing a simple render farm hosted in Windows Azure using worker roles and the Azure Storage service. At the start of the presentation I deploy an Azure application that uses 16 worker roles to render a 1,500 frame 3D ray-traced animation. At the end of the presentation, when the animation was complete, I would play the animation delete the Azure deployment. The standing joke with the audience was that it was that it was a “$2 demo”, as the compute charges for running the 16 instances for an hour was $1.92, factor in the bandwidth charges and it’s a couple of dollars. The point of the demo is that it highlights one of the great benefits of cloud computing, you pay for what you use, and if you need massive compute power for a short period of time using Windows Azure can work out very cost effective. The “$2 demo” was great for presenting at user groups and conferences in that it could be deployed to Azure, used to render an animation, and then removed in a one hour session. I have always had the idea of doing something a bit more impressive with the demo, and scaling it from a “$2 demo” to a “$30 demo”. The challenge was to create a visually appealing animation in high definition format and keep the demo time down to one hour. This article will take a run through how I achieved this. Ray Tracing Ray tracing, a technique for generating high quality photorealistic images, gained popularity in the 90’s with companies like Pixar creating feature length computer animations, and also the emergence of shareware text-based ray tracers that could run on a home PC. In order to render a ray traced image, the ray of light that would pass from the view point must be tracked until it intersects with an object. At the intersection, the color, reflectiveness, transparency, and refractive index of the object are used to calculate if the ray will be reflected or refracted. Each pixel may require thousands of calculations to determine what color it will be in the rendered image. Pin-Board Toys Having very little artistic talent and a basic understanding of maths I decided to focus on an animation that could be modeled fairly easily and would look visually impressive. I’ve always liked the pin-board desktop toys that become popular in the 80’s and when I was working as a 3D animator back in the 90’s I always had the idea of creating a 3D ray-traced animation of a pin-board, but never found the energy to do it. Even if I had a go at it, the render time to produce an animation that would look respectable on a 486 would have been measured in months. PolyRay Back in 1995 I landed my first real job, after spending three years being a beach-ski-climbing-paragliding-bum, and was employed to create 3D ray-traced animations for a CD-ROM that school kids would use to learn physics. I had got into the strange and wonderful world of text-based ray tracing, and was using a shareware ray-tracer called PolyRay. PolyRay takes a text file describing a scene as input and, after a few hours processing on a 486, produced a high quality ray-traced image. The following is an example of a basic PolyRay scene file. background Midnight_Blue static define matte surface { ambient 0.1 diffuse 0.7 } define matte_white texture { matte { color white } } define matte_black texture { matte { color dark_slate_gray } } define position_cylindrical 3 define lookup_sawtooth 1 define light_wood <0.6, 0.24, 0.1> define median_wood <0.3, 0.12, 0.03> define dark_wood <0.05, 0.01, 0.005> define wooden texture { noise surface { ambient 0.2 diffuse 0.7 specular white, 0.5 microfacet Reitz 10 position_fn position_cylindrical position_scale 1 lookup_fn lookup_sawtooth octaves 1 turbulence 1 color_map( [0.0, 0.2, light_wood, light_wood] [0.2, 0.3, light_wood, median_wood] [0.3, 0.4, median_wood, light_wood] [0.4, 0.7, light_wood, light_wood] [0.7, 0.8, light_wood, median_wood] [0.8, 0.9, median_wood, light_wood] [0.9, 1.0, light_wood, dark_wood]) } } define glass texture { surface { ambient 0 diffuse 0 specular 0.2 reflection white, 0.1 transmission white, 1, 1.5 }} define shiny surface { ambient 0.1 diffuse 0.6 specular white, 0.6 microfacet Phong 7 } define steely_blue texture { shiny { color black } } define chrome texture { surface { color white ambient 0.0 diffuse 0.2 specular 0.4 microfacet Phong 10 reflection 0.8 } } viewpoint { from <4.000, -1.000, 1.000> at <0.000, 0.000, 0.000> up <0, 1, 0> angle 60 resolution 640, 480 aspect 1.6 image_format 0 } light <-10, 30, 20> light <-10, 30, -20> object { disc <0, -2, 0>, <0, 1, 0>, 30 wooden } object { sphere <0.000, 0.000, 0.000>, 1.00 chrome } object { cylinder <0.000, 0.000, 0.000>, <0.000, 0.000, -4.000>, 0.50 chrome } After setting up the background and defining colors and textures, the viewpoint is specified. The “camera” is located at a point in 3D space, and it looks towards another point. The angle, image resolution, and aspect ratio are specified. Two lights are present in the image at defined coordinates. The three objects in the image are a wooden disc to represent a table top, and a sphere and cylinder that intersect to form a pin that will be used for the pin board toy in the final animation. When the image is rendered, the following image is produced. The pins are modeled with a chrome surface, so they reflect the environment around them. Note that the scale of the pin shaft is not correct, this will be fixed later. Modeling the Pin Board The frame of the pin-board is made up of three boxes, and six cylinders, the front box is modeled using a clear, slightly reflective solid, with the same refractive index of glass. The other shapes are modeled as metal. object { box <-5.5, -1.5, 1>, <5.5, 5.5, 1.2> glass } object { box <-5.5, -1.5, -0.04>, <5.5, 5.5, -0.09> steely_blue } object { box <-5.5, -1.5, -0.52>, <5.5, 5.5, -0.59> steely_blue } object { cylinder <-5.2, -1.2, 1.4>, <-5.2, -1.2, -0.74>, 0.2 steely_blue } object { cylinder <5.2, -1.2, 1.4>, <5.2, -1.2, -0.74>, 0.2 steely_blue } object { cylinder <-5.2, 5.2, 1.4>, <-5.2, 5.2, -0.74>, 0.2 steely_blue } object { cylinder <5.2, 5.2, 1.4>, <5.2, 5.2, -0.74>, 0.2 steely_blue } object { cylinder <0, -1.2, 1.4>, <0, -1.2, -0.74>, 0.2 steely_blue } object { cylinder <0, 5.2, 1.4>, <0, 5.2, -0.74>, 0.2 steely_blue } In order to create the matrix of pins that make up the pin board I used a basic console application with a few nested loops to create two intersecting matrixes of pins, which models the layout used in the pin boards. The resulting image is shown below. The pin board contains 11,481 pins, with the scene file containing 23,709 lines of code. For the complete animation 2,000 scene files will be created, which is over 47 million lines of code. Each pin in the pin-board will slide out a specific distance when an object is pressed into the back of the board. This is easily modeled by setting the Z coordinate of the pin to a specific value. In order to set all of the pins in the pin-board to the correct position, a bitmap image can be used. The position of the pin can be set based on the color of the pixel at the appropriate position in the image. When the Windows Azure logo is used to set the Z coordinate of the pins, the following image is generated. The challenge now was to make a cool animation. The Azure Logo is fine, but it is static. Using a normal video to animate the pins would not work; the colors in the video would not be the same as the depth of the objects from the camera. In order to simulate the pin board accurately a series of frames from a depth camera could be used. Windows Kinect The Kenect controllers for the X-Box 360 and Windows feature a depth camera. The Kinect SDK for Windows provides a programming interface for Kenect, providing easy access for .NET developers to the Kinect sensors. The Kinect Explorer provided with the Kinect SDK is a great starting point for exploring Kinect from a developers perspective. Both the X-Box 360 Kinect and the Windows Kinect will work with the Kinect SDK, the Windows Kinect is required for commercial applications, but the X-Box Kinect can be used for hobby projects. The Windows Kinect has the advantage of providing a mode to allow depth capture with objects closer to the camera, which makes for a more accurate depth image for setting the pin positions. Creating a Depth Field Animation The depth field animation used to set the positions of the pin in the pin board was created using a modified version of the Kinect Explorer sample application. In order to simulate the pin board accurately, a small section of the depth range from the depth sensor will be used. Any part of the object in front of the depth range will result in a white pixel; anything behind the depth range will be black. Within the depth range the pixels in the image will be set to RGB values from 0,0,0 to 255,255,255. A screen shot of the modified Kinect Explorer application is shown below. The Kinect Explorer sample application was modified to include slider controls that are used to set the depth range that forms the image from the depth stream. This allows the fine tuning of the depth image that is required for simulating the position of the pins in the pin board. The Kinect Explorer was also modified to record a series of images from the depth camera and save them as a sequence JPEG files that will be used to animate the pins in the animation the Start and Stop buttons are used to start and stop the image recording. En example of one of the depth images is shown below. Once a series of 2,000 depth images has been captured, the task of creating the animation can begin. Rendering a Test Frame In order to test the creation of frames and get an approximation of the time required to render each frame a test frame was rendered on-premise using PolyRay. The output of the rendering process is shown below. The test frame contained 23,629 primitive shapes, most of which are the spheres and cylinders that are used for the 11,800 or so pins in the pin board. The 1280x720 image contains 921,600 pixels, but as anti-aliasing was used the number of rays that were calculated was 4,235,777, with 3,478,754,073 object boundaries checked. The test frame of the pin board with the depth field image applied is shown below. The tracing time for the test frame was 4 minutes 27 seconds, which means rendering the2,000 frames in the animation would take over 148 hours, or a little over 6 days. Although this is much faster that an old 486, waiting almost a week to see the results of an animation would make it challenging for animators to create, view, and refine their animations. It would be much better if the animation could be rendered in less than one hour. Windows Azure Worker Roles The cost of creating an on-premise render farm to render animations increases in proportion to the number of servers. The table below shows the cost of servers for creating a render farm, assuming a cost of $500 per server. Number of Servers Cost 1 $500 16 $8,000 256 $128,000 As well as the cost of the servers, there would be additional costs for networking, racks etc. Hosting an environment of 256 servers on-premise would require a server room with cooling, and some pretty hefty power cabling. The Windows Azure compute services provide worker roles, which are ideal for performing processor intensive compute tasks. With the scalability available in Windows Azure a job that takes 256 hours to complete could be perfumed using different numbers of worker roles. The time and cost of using 1, 16 or 256 worker roles is shown below. Number of Worker Roles Render Time Cost 1 256 hours $30.72 16 16 hours $30.72 256 1 hour $30.72 Using worker roles in Windows Azure provides the same cost for the 256 hour job, irrespective of the number of worker roles used. Provided the compute task can be broken down into many small units, and the worker role compute power can be used effectively, it makes sense to scale the application so that the task is completed quickly, making the results available in a timely fashion. The task of rendering 2,000 frames in an animation is one that can easily be broken down into 2,000 individual pieces, which can be performed by a number of worker roles. Creating a Render Farm in Windows Azure The architecture of the render farm is shown in the following diagram. The render farm is a hybrid application with the following components: · On-Premise o Windows Kinect – Used combined with the Kinect Explorer to create a stream of depth images. o Animation Creator – This application uses the depth images from the Kinect sensor to create scene description files for PolyRay. These files are then uploaded to the jobs blob container, and job messages added to the jobs queue. o Process Monitor – This application queries the role instance lifecycle table and displays statistics about the render farm environment and render process. o Image Downloader – This application polls the image queue and downloads the rendered animation files once they are complete. · Windows Azure o Azure Storage – Queues and blobs are used for the scene description files and completed frames. A table is used to store the statistics about the rendering environment. The architecture of each worker role is shown below. The worker role is configured to use local storage, which provides file storage on the worker role instance that can be use by the applications to render the image and transform the format of the image. The service definition for the worker role with the local storage configuration highlighted is shown below. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="CloudRay" > <WorkerRole name="CloudRayWorkerRole" vmsize="Small"> <Imports> </Imports> <ConfigurationSettings> <Setting name="DataConnectionString" /> </ConfigurationSettings> <LocalResources> <LocalStorage name="RayFolder" cleanOnRoleRecycle="true" /> </LocalResources> </WorkerRole> </ServiceDefinition> The two executable programs, PolyRay.exe and DTA.exe are included in the Azure project, with Copy Always set as the property. PolyRay will take the scene description file and render it to a Truevision TGA file. As the TGA format has not seen much use since the mid 90’s it is converted to a JPG image using Dave's Targa Animator, another shareware application from the 90’s. Each worker roll will use the following process to render the animation frames. 1. The worker process polls the job queue, if a job is available the scene description file is downloaded from blob storage to local storage. 2. PolyRay.exe is started in a process with the appropriate command line arguments to render the image as a TGA file. 3. DTA.exe is started in a process with the appropriate command line arguments convert the TGA file to a JPG file. 4. The JPG file is uploaded from local storage to the images blob container. 5. A message is placed on the images queue to indicate a new image is available for download. 6. The job message is deleted from the job queue. 7. The role instance lifecycle table is updated with statistics on the number of frames rendered by the worker role instance, and the CPU time used. The code for this is shown below. public override void Run() { // Set environment variables string polyRayPath = Path.Combine(Environment.GetEnvironmentVariable("RoleRoot"), PolyRayLocation); string dtaPath = Path.Combine(Environment.GetEnvironmentVariable("RoleRoot"), DTALocation); LocalResource rayStorage = RoleEnvironment.GetLocalResource("RayFolder"); string localStorageRootPath = rayStorage.RootPath; JobQueue jobQueue = new JobQueue("renderjobs"); JobQueue downloadQueue = new JobQueue("renderimagedownloadjobs"); CloudRayBlob sceneBlob = new CloudRayBlob("scenes"); CloudRayBlob imageBlob = new CloudRayBlob("images"); RoleLifecycleDataSource roleLifecycleDataSource = new RoleLifecycleDataSource(); Frames = 0; while (true) { // Get the render job from the queue CloudQueueMessage jobMsg = jobQueue.Get(); if (jobMsg != null) { // Get the file details string sceneFile = jobMsg.AsString; string tgaFile = sceneFile.Replace(".pi", ".tga"); string jpgFile = sceneFile.Replace(".pi", ".jpg"); string sceneFilePath = Path.Combine(localStorageRootPath, sceneFile); string tgaFilePath = Path.Combine(localStorageRootPath, tgaFile); string jpgFilePath = Path.Combine(localStorageRootPath, jpgFile); // Copy the scene file to local storage sceneBlob.DownloadFile(sceneFilePath); // Run the ray tracer. string polyrayArguments = string.Format("\"{0}\" -o \"{1}\" -a 2", sceneFilePath, tgaFilePath); Process polyRayProcess = new Process(); polyRayProcess.StartInfo.FileName = Path.Combine(Environment.GetEnvironmentVariable("RoleRoot"), polyRayPath); polyRayProcess.StartInfo.Arguments = polyrayArguments; polyRayProcess.Start(); polyRayProcess.WaitForExit(); // Convert the image string dtaArguments = string.Format(" {0} /FJ /P{1}", tgaFilePath, Path.GetDirectoryName (jpgFilePath)); Process dtaProcess = new Process(); dtaProcess.StartInfo.FileName = Path.Combine(Environment.GetEnvironmentVariable("RoleRoot"), dtaPath); dtaProcess.StartInfo.Arguments = dtaArguments; dtaProcess.Start(); dtaProcess.WaitForExit(); // Upload the image to blob storage imageBlob.UploadFile(jpgFilePath); // Add a download job. downloadQueue.Add(jpgFile); // Delete the render job message jobQueue.Delete(jobMsg); Frames++; } else { Thread.Sleep(1000); } // Log the worker role activity. roleLifecycleDataSource.Alive ("CloudRayWorker", RoleLifecycleDataSource.RoleLifecycleId, Frames); } } Monitoring Worker Role Instance Lifecycle In order to get more accurate statistics about the lifecycle of the worker role instances used to render the animation data was tracked in an Azure storage table. The following class was used to track the worker role lifecycles in Azure storage. public class RoleLifecycle : TableServiceEntity { public string ServerName { get; set; } public string Status { get; set; } public DateTime StartTime { get; set; } public DateTime EndTime { get; set; } public long SecondsRunning { get; set; } public DateTime LastActiveTime { get; set; } public int Frames { get; set; } public string Comment { get; set; } public RoleLifecycle() { } public RoleLifecycle(string roleName) { PartitionKey = roleName; RowKey = Utils.GetAscendingRowKey(); Status = "Started"; StartTime = DateTime.UtcNow; LastActiveTime = StartTime; EndTime = StartTime; SecondsRunning = 0; Frames = 0; } } A new instance of this class is created and added to the storage table when the role starts. It is then updated each time the worker renders a frame to record the total number of frames rendered and the total processing time. These statistics are used be the monitoring application to determine the effectiveness of use of resources in the render farm. Rendering the Animation The Azure solution was deployed to Windows Azure with the service configuration set to 16 worker role instances. This allows for the application to be tested in the cloud environment, and the performance of the application determined. When I demo the application at conferences and user groups I often start with 16 instances, and then scale up the application to the full 256 instances. The configuration to run 16 instances is shown below. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="CloudRay" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="1" osVersion="*"> <Role name="CloudRayWorkerRole"> <Instances count="16" /> <ConfigurationSettings> <Setting name="DataConnectionString" value="DefaultEndpointsProtocol=https;AccountName=cloudraydata;AccountKey=..." /> </ConfigurationSettings> </Role> </ServiceConfiguration> About six minutes after deploying the application the first worker roles become active and start to render the first frames of the animation. The CloudRay Monitor application displays an icon for each worker role instance, with a number indicating the number of frames that the worker role has rendered. The statistics on the left show the number of active worker roles and statistics about the render process. The render time is the time since the first worker role became active; the CPU time is the total amount of processing time used by all worker role instances to render the frames. Five minutes after the first worker role became active the last of the 16 worker roles activated. By this time the first seven worker roles had each rendered one frame of the animation. With 16 worker roles u and running it can be seen that one hour and 45 minutes CPU time has been used to render 32 frames with a render time of just under 10 minutes. At this rate it would take over 10 hours to render the 2,000 frames of the full animation. In order to complete the animation in under an hour more processing power will be required. Scaling the render farm from 16 instances to 256 instances is easy using the new management portal. The slider is set to 256 instances, and the configuration saved. We do not need to re-deploy the application, and the 16 instances that are up and running will not be affected. Alternatively, the configuration file for the Azure service could be modified to specify 256 instances. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="CloudRay" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="1" osVersion="*"> <Role name="CloudRayWorkerRole"> <Instances count="256" /> <ConfigurationSettings> <Setting name="DataConnectionString" value="DefaultEndpointsProtocol=https;AccountName=cloudraydata;AccountKey=..." /> </ConfigurationSettings> </Role> </ServiceConfiguration> Six minutes after the new configuration has been applied 75 new worker roles have activated and are processing their first frames. Five minutes later the full configuration of 256 worker roles is up and running. We can see that the average rate of frame rendering has increased from 3 to 12 frames per minute, and that over 17 hours of CPU time has been utilized in 23 minutes. In this test the time to provision 140 worker roles was about 11 minutes, which works out at about one every five seconds. We are now half way through the rendering, with 1,000 frames complete. This has utilized just under three days of CPU time in a little over 35 minutes. The animation is now complete, with 2,000 frames rendered in a little over 52 minutes. The CPU time used by the 256 worker roles is 6 days, 7 hours and 22 minutes with an average frame rate of 38 frames per minute. The rendering of the last 1,000 frames took 16 minutes 27 seconds, which works out at a rendering rate of 60 frames per minute. The frame counts in the server instances indicate that the use of a queue to distribute the workload has been very effective in distributing the load across the 256 worker role instances. The first 16 instances that were deployed first have rendered between 11 and 13 frames each, whilst the 240 instances that were added when the application was scaled have rendered between 6 and 9 frames each. Completed Animation I’ve uploaded the completed animation to YouTube, a low resolution preview is shown below. Pin Board Animation Created using Windows Kinect and 256 Windows Azure Worker Roles The animation can be viewed in 1280x720 resolution at the following link: http://www.youtube.com/watch?v=n5jy6bvSxWc Effective Use of Resources According to the CloudRay monitor statistics the animation took 6 days, 7 hours and 22 minutes CPU to render, this works out at 152 hours of compute time, rounded up to the nearest hour. As the usage for the worker role instances are billed for the full hour, it may have been possible to render the animation using fewer than 256 worker roles. When deciding the optimal usage of resources, the time required to provision and start the worker roles must also be considered. In the demo I started with 16 worker roles, and then scaled the application to 256 worker roles. It would have been more optimal to start the application with maybe 200 worker roles, and utilized the full hour that I was being billed for. This would, however, have prevented showing the ease of scalability of the application. The new management portal displays the CPU usage across the worker roles in the deployment. The average CPU usage across all instances is 93.27%, with over 99% used when all the instances are up and running. This shows that the worker role resources are being used very effectively. Grid Computing Scenarios Although I am using this scenario for a hobby project, there are many scenarios where a large amount of compute power is required for a short period of time. Windows Azure provides a great platform for developing these types of grid computing applications, and can work out very cost effective. · Windows Azure can provide massive compute power, on demand, in a matter of minutes. · The use of queues to manage the load balancing of jobs between role instances is a simple and effective solution. · Using a cloud-computing platform like Windows Azure allows proof-of-concept scenarios to be tested and evaluated on a very low budget. · No charges for inbound data transfer makes the uploading of large data sets to Windows Azure Storage services cost effective. (Transaction charges still apply.) Tips for using Windows Azure for Grid Computing Scenarios I found the implementation of a render farm using Windows Azure a fairly simple scenario to implement. I was impressed by ease of scalability that Azure provides, and by the short time that the application took to scale from 16 to 256 worker role instances. In this case it was around 13 minutes, in other tests it took between 10 and 20 minutes. The following tips may be useful when implementing a grid computing project in Windows Azure. · Using an Azure Storage queue to load-balance the units of work across multiple worker roles is simple and very effective. The design I have used in this scenario could easily scale to many thousands of worker role instances. · Windows Azure accounts are typically limited to 20 cores. If you need to use more than this, a call to support and a credit card check will be required. · Be aware of how the billing model works. You will be charged for worker role instances for the full clock our in which the instance is deployed. Schedule the workload to start just after the clock hour has started. · Monitor the utilization of the resources you are provisioning, ensure that you are not paying for worker roles that are idle. · If you are deploying third party applications to worker roles, you may well run into licensing issues. Purchasing software licenses on a per-processor basis when using hundreds of processors for a short time period would not be cost effective. · Third party software may also require installation onto the worker roles, which can be accomplished using start-up tasks. Bear in mind that adding a startup task and possible re-boot will add to the time required for the worker role instance to start and activate. An alternative may be to use a prepared VM and use VM roles. · Consider using the Windows Azure Autoscaling Application Block (WASABi) to autoscale the worker roles in your application. When using a large number of worker roles, the utilization must be carefully monitored, if the scaling algorithms are not optimal it could get very expensive!

Read the article

Making a app show inside a GUI in Java

- by José

Hello. I have one problem I've been dealing with for this week. You see, I'm new to Java, so that's probably it... Anyways, I've started a project out of pure curiosity. I had it done in Java, but in plain CMD-style, which is not very pretty. It calls one of my ten programs, chosen by the user using "Case". Eg.: If you type 1, it will go to program 1. After you finish it, it goes back to selection until the user press 0. After that, I've been trying to make a GUI for it. I've been able to create the selector alone and make it respond to the numbers chosen. If you press 1 and click ok, it will tell you you've chosen program 1. I, however, have not been able to make it run the program. I've been trying to make the program show up in a jPanel, part of the main GUI. I failed miserably. The program runs in separate but I can't make them run together like the CMD one. The apps were made in Eclipse SDK 3.5.2 The GUIs were made in Netbeans IDE 6.8 Here's the code for the GUI only (the prints are in PT-BR, my native language): Main program: /* * To change this template, choose Tools | Templates * and open the template in the editor. */ /* * ProgramasGUI.java * * Created on 31/01/2010, 22:56:19 */ package Main; import Main.Prog1; /** * * @author Zeh® */ public class ProgramasGUI extends javax.swing.JFrame { /** Creates new form ProgramasGUI */ public ProgramasGUI() { initComponents(); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { selecao = new javax.swing.JTextField(); mostrador = new javax.swing.JLabel(); selecionar = new javax.swing.JButton(); mostrador1 = new javax.swing.JLabel(); jPanel1 = new javax.swing.JPanel(); setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE); selecao.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { selecaoActionPerformed(evt); } }); mostrador.setText("Qual o programa desejado?"); selecionar.setText("OK"); selecionar.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { selecionarActionPerformed(evt); } }); mostrador1.setText("Saiba aqui o Programa escolhido!"); jPanel1.addComponentListener(new java.awt.event.ComponentAdapter() { public void componentShown(java.awt.event.ComponentEvent evt) { jPanel1ComponentShown(evt); } }); javax.swing.GroupLayout jPanel1Layout = new javax.swing.GroupLayout(jPanel1); jPanel1.setLayout(jPanel1Layout); jPanel1Layout.setHorizontalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 100, Short.MAX_VALUE) ); jPanel1Layout.setVerticalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 100, Short.MAX_VALUE) ); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane()); getContentPane().setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addContainerGap() .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addComponent(selecao, javax.swing.GroupLayout.PREFERRED_SIZE, 203, javax.swing.GroupLayout.PREFERRED_SIZE) .addComponent(selecionar, javax.swing.GroupLayout.DEFAULT_SIZE, 203, Short.MAX_VALUE)) .addGap(18, 18, 18) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addComponent(mostrador1, javax.swing.GroupLayout.PREFERRED_SIZE, 193, javax.swing.GroupLayout.PREFERRED_SIZE) .addComponent(mostrador, javax.swing.GroupLayout.PREFERRED_SIZE, 179, javax.swing.GroupLayout.PREFERRED_SIZE))) .addGroup(layout.createSequentialGroup() .addGap(162, 162, 162) .addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))) .addContainerGap()) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, layout.createSequentialGroup() .addContainerGap(39, Short.MAX_VALUE) .addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE) .addGap(30, 30, 30) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(selecao, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE) .addComponent(mostrador, javax.swing.GroupLayout.PREFERRED_SIZE, 30, javax.swing.GroupLayout.PREFERRED_SIZE)) .addGap(18, 18, 18) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(selecionar) .addComponent(mostrador1)) .addContainerGap()) ); pack(); }// </editor-fold> private void selecaoActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: } private void selecionarActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: int programa = (int)((Double.parseDouble(selecao.getText()))); switch (programa) { case 1: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 2: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 3: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 4: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 5: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 6: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 7: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 8: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 9: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break; case 10: mostrador1.setText("O programa " + programa + " foi escolhido!" ); break;} } private void jPanel1ComponentShown(java.awt.event.ComponentEvent evt) { int programa = (int)((Double.parseDouble(selecao.getText()))); switch (programa) { case 1: addNotify(Prog1.); break;} } /** * @param args the command line arguments */ public static void main(String args[]) { java.awt.EventQueue.invokeLater(new Runnable() { public void run() { new ProgramasGUI().setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JPanel jPanel1; private javax.swing.JLabel mostrador; private javax.swing.JLabel mostrador1; private javax.swing.JTextField selecao; private javax.swing.JButton selecionar; // End of variables declaration } And here's the sub-program: /* * To change this template, choose Tools | Templates * and open the template in the editor. */ /* * Prog1.java * * Created on 02/02/2010, 23:57:59 */ package Main; /** * * @author Zeh® */ public class Prog1 extends javax.swing.JPanel { /** Creates new form Prog1 */ public Prog1() { initComponents(); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { jLabel1 = new javax.swing.JLabel(); numesc = new javax.swing.JLabel(); jLabel3 = new javax.swing.JLabel(); jLabel4 = new javax.swing.JLabel(); jButton1 = new javax.swing.JButton(); campo = new javax.swing.JTextField(); jLabel1.setText("Saiba aqui o Antecessor!"); numesc.setText("O número escolhido é: X"); jLabel3.setText("Saiba aqui o Sucessor!"); jLabel4.setText("Insira um número para saber seu Antecessor e Sucessor!"); jButton1.setText("Calcular!"); jButton1.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { jButton1ActionPerformed(evt); } }); campo.setText("Insira seu número"); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(this); this.setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addContainerGap() .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(16, 16, 16) .addComponent(jButton1)) .addComponent(campo, javax.swing.GroupLayout.PREFERRED_SIZE, 100, javax.swing.GroupLayout.PREFERRED_SIZE)) .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(10, 10, 10) .addComponent(jLabel3)) .addGroup(layout.createSequentialGroup() .addGap(10, 10, 10) .addComponent(numesc, javax.swing.GroupLayout.DEFAULT_SIZE, 154, Short.MAX_VALUE)) .addComponent(jLabel1, javax.swing.GroupLayout.DEFAULT_SIZE, 164, Short.MAX_VALUE))) .addComponent(jLabel4)) .addContainerGap()) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, layout.createSequentialGroup() .addContainerGap() .addComponent(jLabel4) .addGap(18, 18, 18) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(campo, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE) .addComponent(jLabel1)) .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED) .addComponent(numesc) .addGap(11, 11, 11) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(jLabel3) .addComponent(jButton1)) .addContainerGap(24, Short.MAX_VALUE)) ); }// </editor-fold> private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) { int num = (int)((Double.parseDouble(campo.getText()))); numesc.setText("O número escolhido é: " + num); int x = num-1; jLabel1.setText ("O antecessor é: " + x); int y = num+1; jLabel3.setText ("O sucessor é: " + y); } // Variables declaration - do not modify private javax.swing.JTextField campo; private javax.swing.JButton jButton1; private javax.swing.JLabel jLabel1; private javax.swing.JLabel jLabel3; private javax.swing.JLabel jLabel4; private javax.swing.JLabel numesc; // End of variables declaration } Any help would be very appreciated. If I, for some reason, made a mistake typing and/or setting the layout of this post incorrectly, please accept my apologies.

Read the article

Help debugging c fifos code - stack smashing detected - open call not functioning - removing pipes

- by nunos

I have three bugs/questions regarding the source code pasted below: stack smashing deteced: In order to compile and not have that error I have addedd the gcc compile flag -fno-stack-protector. However, this should be just a temporary solution, since I would like to find where the cause for this is and correct it. However, I haven't been able to do so. Any clues? For some reason, the last open function call doesn't work and the programs just stops there, without an error, even though the fifo already exists. I want to delete the pipes from the filesystem after before terminating the processes. I have added close and unlink statements at the end, but the fifos are not removed. What am I doing wrong? Thanks very much in advance. P.S.: I am pasting here the whole source file for additional clarity. Just ignore the comments, since they are in my own native language. server.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define FIFO_NAME_MAX_LEN 20 #define FIFO_DIR "/tmp/" #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" typedef enum { false, true } bool; bool background = false; char* logfile = NULL; void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); read(fd, *var, n_bytes); printf("read %d bytes '%s'\n", n_bytes, *var); } void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } int main(int argc, char* argv[]) { //CRIA FIFO CMD_CLI_TO_SRV, se ainda nao existir char* fifo_name_cmd_cli_to_srv; fifo_name_cmd_cli_to_srv = (char*) malloc ( (strlen(FIFO_NAME_CMD_CLI_TO_SRV) + strlen(FIFO_DIR) + 1) * sizeof(char) ); strcpy(fifo_name_cmd_cli_to_srv, FIFO_DIR); strcat(fifo_name_cmd_cli_to_srv, FIFO_NAME_CMD_CLI_TO_SRV); int n = mkfifo(fifo_name_cmd_cli_to_srv, 0660); //TODO ver permissoes if (n < 0 && errno != EEXIST) //se houver erro, e nao for por causa de ja haver um com o mesmo nome, termina o programa { fprintf(stderr, "erro ao criar o fifo\n"); fprintf(stderr, "errno: %d\n", errno); exit(4); } //se por acaso já existir, nao cria o fifo e continua o programa normalmente //le informacao enviada pelo cliente, nesta ordem: //1. pid (em formato char*) do processo cliente //2. comando /CONNECT //3. nome de fifo INFO_SRV_TO_CLIXXX //4. nome de fifo MSG_SRV_TO_CLIXXX char* command; char* fifo_name_info_srv_to_cli; char* fifo_name_msg_srv_to_cli; char* client_pid_string; int client_pid; int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open(fifo_name_cmd_cli_to_srv, O_RDONLY); read_from_fifo(fd_cmd_cli_to_srv, &client_pid_string); client_pid = atoi(client_pid_string); read_from_fifo(fd_cmd_cli_to_srv, &command); //recebe commando /CONNECT read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_info_srv_to_cli); //recebe nome de fifo INFO_SRV_TO_CLIXXX read_from_fifo(fd_cmd_cli_to_srv, &fifo_name_msg_srv_to_cli); //recebe nome de fifo MSG_TO_SRV_TO_CLIXXX //CIRA FIFO MSG_CLIXXX_TO_SRV char fifo_name_msg_cli_to_srv[FIFO_NAME_MAX_LEN]; strcpy(fifo_name_msg_cli_to_srv, FIFO_DIR); strcat(fifo_name_msg_cli_to_srv, "lrc_msg_cli"); strcat(fifo_name_msg_cli_to_srv, client_pid_string); strcat(fifo_name_msg_cli_to_srv, "_to_srv"); n = mkfifo(fifo_name_msg_cli_to_srv, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_msg_cli_to_srv); fprintf(stderr, "errno: %d\n", errno); exit(5); } //envia ao cliente a resposta ao commando /CONNECT fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_WRONLY); write_to_fifo(fd_info_srv_to_cli, fifo_name_msg_cli_to_srv); free(logfile); free(fifo_name_cmd_cli_to_srv); close(fd_cmd_cli_to_srv); unlink(fifo_name_cmd_cli_to_srv); unlink(fifo_name_msg_cli_to_srv); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } client.c: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <errno.h> #define MAX_INPUT_LENGTH 100 #define PID_BUFFER_LEN 10 #define FIFO_NAME_CMD_CLI_TO_SRV "lrc_cmd_cli_to_srv" #define FIFO_NAME_INFO_SRV_TO_CLI "lrc_info_srv_to_cli" #define FIFO_NAME_MSG_SRV_TO_CLI "lrc_msg_srv_to_cli" #define COMMAND_MAX_LEN 100 #define FIFO_DIR "/tmp/" typedef enum { false, true } bool; char* nickname; char* name; char* email; void write_to_fifo(int fd, char* data) { int n_bytes = (strlen(data)+1) * sizeof(char); write(fd, &n_bytes, sizeof(int)); //primeiro envia o numero de bytes que a proxima instrucao write ira enviar write(fd, data, n_bytes); printf("writing %d bytes '%s'\n", n_bytes, data); } void read_from_fifo(int fd, char** var) { int n_bytes; read(fd, &n_bytes, sizeof(int)); *var = (char *) malloc (n_bytes); printf("read '%s'\n", *var); read(fd, *var, n_bytes); } int main(int argc, char* argv[]) { pid_t pid = getpid(); //CRIA FIFO INFO_SRV_TO_CLIXXX char pid_string[PID_BUFFER_LEN]; sprintf(pid_string, "%d", pid); char* fifo_name_info_srv_to_cli; fifo_name_info_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_INFO_SRV_TO_CLI) + strlen(pid_string) + 1 ) * sizeof(char) ); strcpy(fifo_name_info_srv_to_cli, FIFO_DIR); strcat(fifo_name_info_srv_to_cli, FIFO_NAME_INFO_SRV_TO_CLI); strcat(fifo_name_info_srv_to_cli, pid_string); int n = mkfifo(fifo_name_info_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(6); } int fd_cmd_cli_to_srv, fd_info_srv_to_cli; fd_cmd_cli_to_srv = open("/tmp/lrc_cmd_cli_to_srv", O_WRONLY); char command[COMMAND_MAX_LEN]; printf("> "); scanf("%s", command); while (strcmp(command, "/CONNECT")) { printf("O primeiro comando deverá ser \"/CONNECT\"\n"); printf("> "); scanf("%s", command); } //CRIA FIFO MSG_SRV_TO_CLIXXX char* fifo_name_msg_srv_to_cli; fifo_name_msg_srv_to_cli = (char *) malloc ( (strlen(FIFO_DIR) + strlen(FIFO_NAME_MSG_SRV_TO_CLI) + strlen(pid_string) + 1) * sizeof(char) ); strcpy(fifo_name_msg_srv_to_cli, FIFO_DIR); strcat(fifo_name_msg_srv_to_cli, FIFO_NAME_MSG_SRV_TO_CLI); strcat(fifo_name_msg_srv_to_cli, pid_string); n = mkfifo(fifo_name_msg_srv_to_cli, 0660); if (n < 0) { fprintf(stderr, "error creating %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); exit(7); } // ENVIA COMANDO /CONNECT write_to_fifo(fd_cmd_cli_to_srv, pid_string); //envia pid do processo cliente write_to_fifo(fd_cmd_cli_to_srv, command); //envia commando /CONNECT write_to_fifo(fd_cmd_cli_to_srv, fifo_name_info_srv_to_cli); //envia nome de fifo INFO_SRV_TO_CLIXXX write_to_fifo(fd_cmd_cli_to_srv, fifo_name_msg_srv_to_cli); //envia nome de fifo MSG_TO_SRV_TO_CLIXXX // recebe do servidor a resposta ao comanddo /CONNECT printf("msg1\n"); printf("vamos tentar abrir %s\n", fifo_name_info_srv_to_cli); fd_info_srv_to_cli = open(fifo_name_info_srv_to_cli, O_RDONLY); printf("%s aberto", fifo_name_info_srv_to_cli); if (fd_info_srv_to_cli < 0) { fprintf(stderr, "erro ao criar %s\n", fifo_name_info_srv_to_cli); fprintf(stderr, "errno: %d\n", errno); } printf("msg2\n"); char* fifo_name_msg_cli_to_srv; printf("msg3\n"); read_from_fifo(fd_info_srv_to_cli, &fifo_name_msg_cli_to_srv); printf("msg4\n"); free(nickname); free(name); free(email); free(fifo_name_info_srv_to_cli); free(fifo_name_msg_srv_to_cli); unlink(fifo_name_msg_srv_to_cli); unlink(fifo_name_info_srv_to_cli); printf("fim\n"); return 0; } makefile: CC = gcc CFLAGS = -Wall -lpthread -fno-stack-protector all: client server client: client.c $(CC) $(CFLAGS) client.c -o client server: server.c $(CC) $(CFLAGS) server.c -o server clean: rm -f client server *~

Read the article

Xapian gem failed to install on Mac OS X Snow Leopard + macports

- by goodwill

I have installed xapian-core + xapian-bindings with macports on snow leopard, then trying to install xapian gem fails: Building native extensions. This could take a while... ERROR: Error installing xapian: ERROR: Failed to build gem native extension. /opt/ruby-enterprise/bin/ruby extconf.rb ./configure --with-ruby checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by gcc... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking for dsymutil... dsymutil checking for nmedit... nmedit checking for -single_module linker flag... yes checking for -exported_symbols_list linker flag... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fno-common checking if gcc PIC flag -fno-common works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin10.3.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking for xapian-config... /opt/local/bin/xapian-config checking /opt/local/bin/xapian-config works... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for ruby1.8... no checking for ruby... /opt/ruby-enterprise/bin/ruby checking /opt/ruby-enterprise/bin/ruby version... ruby 1.8.7 (2009-06-12 patchlevel 174) [i686-darwin10.2.0], MBARI 0x6770, Ruby Enterprise Edition 2009.10 checking for /opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0/ruby.h... yes checking ruby/io.h... no checking whether to use -fvisibility=hidden... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xapian-version.h config.status: creating python/Makefile config.status: creating python/docs/Makefile config.status: creating php/Makefile config.status: creating php/docs/Makefile config.status: creating java/Makefile config.status: creating java/native/Makefile config.status: creating java/org/xapian/Makefile config.status: creating java/org/xapian/errors/Makefile config.status: creating java/org/xapian/examples/Makefile config.status: creating java-swig/Makefile config.status: creating tcl8/Makefile config.status: creating tcl8/docs/Makefile config.status: creating tcl8/pkgIndex.tcl config.status: creating csharp/Makefile config.status: creating csharp/docs/Makefile config.status: creating csharp/AssemblyInfo.cs config.status: creating ruby/Makefile config.status: creating ruby/docs/Makefile config.status: creating xapian-bindings.spec config.status: creating python/generate-python-exceptions config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands *** Building bindings for languages: ruby make make all-recursive Making all in ruby make all-recursive Making all in docs make all-am make[5]: Nothing to be done for `all-am'. /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0 -I/opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0 -fno-strict-aliasing -Wall -Wno-unused -Wno-uninitialized -fvisibility=hidden -I/opt/local/include -g -O2 -MT xapian_wrap.lo -MD -MP -MF .deps/xapian_wrap.Tpo -c -o xapian_wrap.lo xapian_wrap.cc ../libtool: line 393: /bin/sed: No such file or directory ../libtool: line 393: /bin/sed: No such file or directory ../libtool: line 792: /bin/sed: No such file or directory : ignoring unknown tag ../libtool: line 792: /bin/sed: No such file or directory *** Warning: inferring the mode of operation is deprecated. *** Future versions of Libtool will require --mode=MODE be specified. ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1156: /bin/sed: No such file or directory : compile: cannot determine name of library object from `' make[4]: *** [xapian_wrap.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 extconf.rb:3:in `system!': unhandled exception from extconf.rb:6 Gem files will remain installed in /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-1.0.15 for inspection. Results logged to /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-1.0.15/gem_make.out Any idea pal?

Read the article

Alright, I'm still stuck on this homework problem. C++

- by Josh

Okay, the past few days I have been trying to get some input on my programs. Well I decided to scrap them for the most part and try again. So once again, I'm in need of help. For the first program I'm trying to fix, it needs to show the sum of SEVEN numbers. Well, I'm trying to change is so that I don't need the mem[##] = ####. I just want the user to be able to input the numbers and the program run from there and go through my switch loop. And have some kind of display..saying like the sum is?.. Here's my code so far. #include <iostream> #include <iomanip> #include <ios> using namespace std; int main() { const int READ = 10; const int WRITE = 11; const int LOAD = 20; const int STORE = 21; const int ADD = 30; const int SUBTRACT = 31; const int DIVIDE = 32; const int MULTIPLY = 33; const int BRANCH = 40; const int BRANCHNEG = 41; const int BRANCHZERO = 42; const int HALT = 43; int mem[100] = {0}; //Making it 100, since simpletron contains a 100 word mem. int operation; //taking the rest of these variables straight out of the book seeing as how they were italisized. int operand; int accum = 0; // the special register is starting at 0 int counter; for ( counter=0; counter < 100; counter++) mem[counter] = 0; // This is for part a, it will take in positive variables in //a sent-controlled loop and compute + print their sum. Variables from example in text. mem[0] = 1009; mem[1] = 1109; mem[2] = 2010; mem[3] = 2111; mem[4] = 2011; mem[5] = 3100; mem[6] = 2113; mem[7] = 1113; mem[8] = 4300; counter = 0; //Makes the variable counter start at 0. while(true) { operand = mem[ counter ]%100; // Finds the op codes from the limit on the mem (100) operation = mem[ counter ]/100; //using a switch loop to set up the loops for the cases switch ( operation ){ case READ: //reads a variable into a word from loc. Enter in -1 to exit cout <<"\n Input a positive variable: "; cin >> mem[ operand ]; counter++; break; case WRITE: // takes a word from location cout << "\n\nThe content at location " << operand << " is " << mem[operand]; counter++; break; case LOAD:// loads accum = mem[ operand ];counter++; break; case STORE: //stores mem[ operand ] = accum;counter++; break; case ADD: //adds accum += mem[operand];counter++; break; case SUBTRACT: // subtracts accum-= mem[ operand ];counter++; break; case DIVIDE: //divides accum /=(mem[ operand ]);counter++; break; case MULTIPLY: // multiplies accum*= mem [ operand ];counter++; break; case BRANCH: // Branches to location counter = operand; break; case BRANCHNEG: //branches if acc. is < 0 if (accum < 0) counter = operand; else counter++; break; case BRANCHZERO: //branches if acc = 0 if (accum == 0) counter = operand; else counter++; break; case HALT: // Program ends break; } } return 0; } part B int main() { const int READ = 10; const int WRITE = 11; const int LOAD = 20; const int STORE = 21; const int ADD = 30; const int SUBTRACT = 31; const int DIVIDE = 32; const int MULTIPLY = 33; const int BRANCH = 40; const int BRANCHNEG = 41; const int BRANCHZERO = 41; const int HALT = 43; int mem[100] = {0}; int operation; int operand; int accum = 0; int pos = 0; int j; mem[22] = 7; // loop 7 times mem[25] = 1; // increment by 1 mem[00] = 4306; mem[01] = 2303; mem[02] = 3402; mem[03] = 6410; mem[04] = 3412; mem[05] = 2111; mem[06] = 2002; mem[07] = 2312; mem[08] = 4210; mem[09] = 2109; mem[10] = 4001; mem[11] = 2015; mem[12] = 3212; mem[13] = 2116; mem[14] = 1101; mem[15] = 1116; mem[16] = 4300; j = 0; while ( true ) { operand = memory[ j ]%100; // Finds the op codes from the limit on the memory (100) operation = memory[ j ]/100; //using a switch loop to set up the loops for the cases switch ( operation ){ case 1: //reads a variable into a word from loc. Enter in -1 to exit cout <<"\n enter #: "; cin >> memory[ operand ]; break; case 2: // takes a word from location cout << "\n\nThe content at location " << operand << "is " << memory[operand]; break; case 3:// loads accum = memory[ operand ]; break; case 4: //stores memory[ operand ] = accum; break; case 5: //adds accum += mem[operand];; break; case 6: // subtracts accum-= memory[ operand ]; break; case 7: //divides accum /=(memory[ operand ]); break; case 8: // multiplies accum*= memory [ operand ]; break; case 9: // Branches to location j = operand; break; case 10: //branches if acc. is < 0 break; case 11: //branches if acc = 0 if (accum == 0) j = operand; break; case 12: // Program ends exit(0); break; } j++; } return 0; }

Read the article

Closing a hook that captures global input events

- by Margus

Intro Here is an example to illustrate the problem. Consider I am tracking and displaying mouse global current position and last click button and position to the user. Here is an image: To archive capturing click events on windows box, that would and will be sent to the other programs event messaging queue, I create a hook using winapi namely user32.dll library. This is outside JDK sandbox, so I use JNA to call the native library. This all works perfectly, but it does not close as I expect it to. My question is - How do I properly close following example program? Example source Code below is not fully written by Me, but taken from this question in Oracle forum and partly fixed. import java.awt.AWTException; import java.awt.Dimension; import java.awt.EventQueue; import java.awt.GridLayout; import java.awt.MouseInfo; import java.awt.Point; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.swing.JFrame; import javax.swing.JLabel; import com.sun.jna.Native; import com.sun.jna.NativeLong; import com.sun.jna.Platform; import com.sun.jna.Structure; import com.sun.jna.platform.win32.BaseTSD.ULONG_PTR; import com.sun.jna.platform.win32.Kernel32; import com.sun.jna.platform.win32.User32; import com.sun.jna.platform.win32.WinDef.HWND; import com.sun.jna.platform.win32.WinDef.LRESULT; import com.sun.jna.platform.win32.WinDef.WPARAM; import com.sun.jna.platform.win32.WinUser.HHOOK; import com.sun.jna.platform.win32.WinUser.HOOKPROC; import com.sun.jna.platform.win32.WinUser.MSG; import com.sun.jna.platform.win32.WinUser.POINT; public class MouseExample { final JFrame jf; final JLabel jl1, jl2; final CWMouseHook mh; final Ticker jt; public class Ticker extends Thread { public boolean update = true; public void done() { update = false; } public void run() { try { Point p, l = MouseInfo.getPointerInfo().getLocation(); int i = 0; while (update == true) { try { p = MouseInfo.getPointerInfo().getLocation(); if (!p.equals(l)) { l = p; jl1.setText(new GlobalMouseClick(p.x, p.y) .toString()); } Thread.sleep(35); } catch (InterruptedException e) { e.printStackTrace(); return; } } } catch (Exception e) { update = false; } } } public MouseExample() throws AWTException, UnsupportedOperationException { this.jl1 = new JLabel("{}"); this.jl2 = new JLabel("{}"); this.jf = new JFrame(); this.jt = new Ticker(); this.jt.start(); this.mh = new CWMouseHook() { @Override public void globalClickEvent(GlobalMouseClick m) { jl2.setText(m.toString()); } }; mh.setMouseHook(); jf.setLayout(new GridLayout(2, 2)); jf.add(new JLabel("Position")); jf.add(jl1); jf.add(new JLabel("Last click")); jf.add(jl2); jf.addWindowListener(new WindowAdapter() { public void windowClosing(WindowEvent we) { mh.dispose(); jt.done(); jf.dispose(); } }); jf.setLocation(new Point(0, 0)); jf.setPreferredSize(new Dimension(200, 90)); jf.pack(); jf.setVisible(true); } public static class GlobalMouseClick { private char c; private int x, y; public GlobalMouseClick(char c, int x, int y) { super(); this.c = c; this.x = x; this.y = y; } public GlobalMouseClick(int x, int y) { super(); this.x = x; this.y = y; } public char getC() { return c; } public void setC(char c) { this.c = c; } public int getX() { return x; } public void setX(int x) { this.x = x; } public int getY() { return y; } public void setY(int y) { this.y = y; } @Override public String toString() { return (c != 0 ? c : "") + " [" + x + "," + y + "]"; } } public static class CWMouseHook { public User32 USER32INST; public CWMouseHook() throws UnsupportedOperationException { if (!Platform.isWindows()) { throw new UnsupportedOperationException( "Not supported on this platform."); } USER32INST = User32.INSTANCE; mouseHook = hookTheMouse(); Native.setProtected(true); } private static LowLevelMouseProc mouseHook; private HHOOK hhk; private boolean isHooked = false; public static final int WM_LBUTTONDOWN = 513; public static final int WM_LBUTTONUP = 514; public static final int WM_RBUTTONDOWN = 516; public static final int WM_RBUTTONUP = 517; public static final int WM_MBUTTONDOWN = 519; public static final int WM_MBUTTONUP = 520; public void dispose() { unsetMouseHook(); mousehook_thread = null; mouseHook = null; hhk = null; USER32INST = null; } public void unsetMouseHook() { isHooked = false; USER32INST.UnhookWindowsHookEx(hhk); System.out.println("Mouse hook is unset."); } public boolean isIsHooked() { return isHooked; } public void globalClickEvent(GlobalMouseClick m) { System.out.println(m); } private Thread mousehook_thread; public void setMouseHook() { mousehook_thread = new Thread(new Runnable() { @Override public void run() { try { if (!isHooked) { hhk = USER32INST.SetWindowsHookEx(14, mouseHook, Kernel32.INSTANCE.GetModuleHandle(null), 0); isHooked = true; System.out .println("Mouse hook is set. Click anywhere."); // message dispatch loop (message pump) MSG msg = new MSG(); while ((USER32INST.GetMessage(msg, null, 0, 0)) != 0) { USER32INST.TranslateMessage(msg); USER32INST.DispatchMessage(msg); if (!isHooked) break; } } else System.out .println("The Hook is already installed."); } catch (Exception e) { System.err.println("Caught exception in MouseHook!"); } } }); mousehook_thread.start(); } private interface LowLevelMouseProc extends HOOKPROC { LRESULT callback(int nCode, WPARAM wParam, MOUSEHOOKSTRUCT lParam); } private LowLevelMouseProc hookTheMouse() { return new LowLevelMouseProc() { @Override public LRESULT callback(int nCode, WPARAM wParam, MOUSEHOOKSTRUCT info) { if (nCode >= 0) { switch (wParam.intValue()) { case CWMouseHook.WM_LBUTTONDOWN: globalClickEvent(new GlobalMouseClick('L', info.pt.x, info.pt.y)); break; case CWMouseHook.WM_RBUTTONDOWN: globalClickEvent(new GlobalMouseClick('R', info.pt.x, info.pt.y)); break; case CWMouseHook.WM_MBUTTONDOWN: globalClickEvent(new GlobalMouseClick('M', info.pt.x, info.pt.y)); break; default: break; } } return USER32INST.CallNextHookEx(hhk, nCode, wParam, info.getPointer()); } }; } public class Point extends Structure { public class ByReference extends Point implements Structure.ByReference { }; public NativeLong x; public NativeLong y; } public static class MOUSEHOOKSTRUCT extends Structure { public static class ByReference extends MOUSEHOOKSTRUCT implements Structure.ByReference { }; public POINT pt; public HWND hwnd; public int wHitTestCode; public ULONG_PTR dwExtraInfo; } } public static void main(String[] args) { EventQueue.invokeLater(new Runnable() { @Override public void run() { try { new MouseExample(); } catch (AWTException e) { e.printStackTrace(); } } }); } }

Read the article

error in finding out the lexems and no of lines of a text file in C

- by mekasperasky

#include<stdio.h> #include<ctype.h> #include<string.h> int main() { int i=0,j,k,lines_count[2]={1,1},operand_count[2]={0},operator_count[2]={0},uoperator_count[2]={0},control_count[2]={0,0},cl[13]={0},variable_dec[2]={0,0},l,p[2]={0},ct,variable_used[2]={0,0},constant_count[2],s[2]={0},t[2]={0}; char a,b[100],c[100]; char d[100]={0}; j=30; FILE *fp1[2],*fp2; fp1[0]=fopen("program1.txt","r"); fp1[1]=fopen("program2.txt","r"); //the source file is opened in read only mode which will passed through the lexer fp2=fopen("ccv1ouput.txt","wb"); //now lets remove all the white spaces and store the rest of the words in a file if(fp1[0]==NULL) { perror("failed to open program1.txt"); //return EXIT_FAILURE; } if(fp1[1]==NULL) { perror("failed to open program2.txt"); //return EXIT_FAILURE; } i=0; k=0; ct=0; while(ct!=2) { while(!feof(fp1[ct])) { a=fgetc(fp1[ct]); if(a!=' '&&a!='\n') { if (!isalpha(a) && !isdigit(a)) { switch(a) { case '+':{ i=0; cl[0]=1; operator_count[ct]=operator_count[ct]+1;break;} case '-':{ cl[1]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '*':{ cl[2]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '/':{ cl[3]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '=':{a=fgetc(fp1[ct]); if (a=='='){cl[4]=1; operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1;} else { cl[5]=1; operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1; ungetc(1,fp1[ct]); } break;} case '%':{ cl[6]=1; operator_count[ct]=operator_count[ct]+1;i=0;break;} case '<':{ a=fgetc(fp1[ct]); if (a=='=') {cl[7]=1; operator_count[ct]=operator_count[ct]+1;} else { cl[8]=1; operator_count[ct]=operator_count[ct]+1; ungetc(1,fp1[ct]); } break; } case '>':{ ; a=fgetc(fp1[ct]); if (a=='='){cl[9]=1; operator_count[ct]=operator_count[ct]+1;} else { cl[10]=1; operator_count[ct]=operator_count[ct]+1; ungetc(1,fp1[ct]); } break;} case '&':{ cl[11]=1; a=fgetc(fp1[ct]); operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1; variable_used[ct]=variable_used[ct]-1; break; } case '|':{ cl[12]=1; a=fgetc(fp1[ct]); operator_count[ct]=operator_count[ct]+1; operand_count[ct]=operand_count[ct]+1; variable_used[ct]=variable_used[ct]-1; break; } case '#':{ while(a!='\n') { a=fgetc(fp1[ct]); } } } } else { d[i]=a; i=i+1; k=k+1; } } else { //printf("%s \n",d); if((strcmp(d,"if")==0)){ memset ( d, 0, 100 ); i=0; control_count[ct]=control_count[ct]+1; } else if(strcmp(d,"then")==0){ i=0;memset ( d, 0, 100 );control_count[ct]=control_count[ct]+1;} else if(strcmp(d,"else")==0){ i=0;memset ( d, 0, 100 );control_count[ct]=control_count[ct]+1;} else if(strcmp(d,"while")==0){ i=0;memset ( d, 0, 100 );control_count[ct]=control_count[ct]+1;} else if(strcmp(d,"int")==0){ while(a != '\n') { a=fgetc(fp1[ct]); if (isalpha(a) ) variable_dec[ct]=variable_dec[ct]+1; } memset ( d, 0, 100 ); lines_count[ct]=lines_count[ct]+1; } else if(strcmp(d,"char")==0){while(a != '\n') { a=fgetc(fp1[ct]); if (isalpha(a) ) variable_dec[ct]=variable_dec[ct]+1; } memset ( d, 0, 100 ); lines_count[ct]=lines_count[ct]+1; } else if(strcmp(d,"float")==0){while(a != '\n') { a=fgetc(fp1[ct]); if (isalpha(a) ) variable_dec[ct]=variable_dec[ct]+1; } memset ( d, 0, 100 ); lines_count[ct]=lines_count[ct]+1; } else if(strcmp(d,"printf")==0){while(a!='\n') a=fgetc(fp1[ct]); memset(d,0,100); } else if(strcmp(d,"scanf")==0){while(a!='\n') a=fgetc(fp1[ct]); memset(d,0,100);} else if (isdigit(d[i-1])) { memset ( d, 0, 100 ); i=0; constant_count[ct]=constant_count[ct]+1; operand_count[ct]=operand_count[ct]+1; } else if (isalpha(d[i-1]) && strcmp(d,"int")!=0 && strcmp(d,"char")!=0 && strcmp(d,"float")!=0 && (strcmp(d,"if")!=0) && strcmp(d,"then")!=0 && strcmp(d,"else")!=0 && strcmp(d,"while")!=0 && strcmp(d,"printf")!=0 && strcmp(d,"scanf")!=0) { memset ( d, 0, 100 ); i=0; operand_count[ct]=operand_count[ct]+1; } else if(a=='\n') { lines_count[ct]=lines_count[ct]+1; memset ( d, 0, 100 ); } } } fclose(fp1[ct]); operand_count[ct]=operand_count[ct]-5; variable_used[0]=operand_count[0]-constant_count[0]; variable_used[1]=operand_count[1]-constant_count[1]; for(j=0;j<12;j++) uoperator_count[ct]=uoperator_count[ct]+cl[j]; fprintf(fp2,"\n statistics of program %d",ct+1); fprintf(fp2,"\n the no of lines ---> %d",lines_count[ct]); fprintf(fp2,"\n the no of operands --->%d",operand_count[ct]); fprintf(fp2,"\n the no of operator --->%d",operator_count[ct]); fprintf(fp2,"\n the no of control statments --->%d",control_count[ct]); fprintf(fp2,"\n the no of unique operators --->%d",uoperator_count[ct]); fprintf(fp2,"\n the no of variables declared--->%d",variable_dec[ct]); fprintf(fp2,"\n the no of variables used--->%d",variable_used[ct]); fprintf(fp2,"\n ---------------------------------"); fprintf(fp2,"\n \t \t \t"); ct=ct+1; } t[0]=lines_count[0]+control_count[0]+uoperator_count[0]; t[1]=lines_count[1]+control_count[1]+uoperator_count[1]; s[0]=operator_count[0]+operand_count[0]+variable_dec[0]+variable_used[0]; s[1]=operator_count[1]+operand_count[1]+variable_dec[1]+variable_used[1]; fprintf(fp2,"\n the time complexity of program 1 is %d",t[0]); fprintf(fp2,"\n the time complexity of program 2 is %d",t[1]); fprintf(fp2,"\n the space complexity of program 1 is %d",s[0]); fprintf(fp2,"\n the space complexity of program 2 is %d",s[1]); if((t[0]>t[1]) && (s[0] >s[1])) fprintf(fp2,"\n the efficiency of program 2 is greater than program 1"); else if(t[0]<t[1] && s[0] < s[1]) fprintf(fp2,"\n the efficiency of program 1 is greater than program 2 " ); else if (t[0]+s[0] > t[1]+s[1]) fprintf(fp2,"\n the efficiency of program 1 is greater than program 2"); else if (t[0]+s[0] < t[1]+s[1]) fprintf(fp2,"\n the efficiency of program 2 is greater than program 1"); else if (t[0]+s[0] == t[1]+s[1]) fprintf(fp2,"\n the efficiency of program 1 is equal to that of program 2"); fclose(fp2); return 0; } this code basically compares two c codes and finds out the no. of variables declared , used , no. of control statements , no. of lines and no. of unique operators , and operands , so as to find out the time complexity and space complexity of of the two programs given in the text file program1.txt and program2.txt ... Lets say program1.txt is this #include<stdio.h> #include<math.h> int main () { FILE *fp; fp=fopen("output.txt","w"); long double t,y=0,x=0,e=5,f=1,w=1; for (t=0;t<10;t=t+0.01) { //if (isnan(y) || isinf(y)) //break; fprintf(fp,"%ld\t%ld\n",y,x); y = y + ((e*(1 - (x*x))*y) - x + f*cos(w*0.1))*0.1; x = x + y*0.1; } fclose(fp); return (0); } i havent indented it as its just a text file . But my output is totally faulty . Its not able to find the any of the ouput that i need . Where is the bug in this ? I am not able to figure out as the algorithm looks fine .

Read the article

Can't seem to install imagick

- by PolishHurricane

I'm trying to install the PHP PEAR PECL extension "imagick" (image magick), but failing horribly. It seems that I keed installing packages to progress, but this one has me stumped. It seems to fail all the way at the bottom. Please Note: I'm using ArchLinux, apt-get doesn't save me. [root@Crux tmp]# pecl install imagick downloading imagick-3.0.1.tgz ... Starting to download imagick-3.0.1.tgz (93,920 bytes) .....................done: 93,920 bytes 13 source files, building running: phpize Configuring for: PHP Api Version: 20100412 Zend Module Api No: 20100525 Zend Extension Api No: 220100525 Please provide the prefix of Imagemagick installation [autodetect] : building in /tmp/pear/temp/pear-build-rootLbSUWT/imagick-3.0.1 running: /tmp/pear/temp/imagick/configure --with-imagick checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/modules checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... 0.13.5 (ok) checking for gawk... gawk checking whether to enable the imagick extension... yes, shared checking whether to enable the imagick GraphicsMagick backend... no checking ImageMagick MagickWand API configuration program... found in /usr/bin/MagickWand-config checking if ImageMagick version is at least 6.2.4... found version 6.7.8 Q16 checking for MagickWand.h header file... found in /usr/include/ImageMagick/wand/MagickWand.h checking PHP version is at least 5.1.3... yes. found 5.4.6 checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 1572864 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /tmp/pear/temp/pear-build-rootLbSUWT/imagick-3.0.1/libtool --mode=compile cc -I. -I/tmp/pear/temp/imagick -DPHP_ATOM_INC -I/tmp/pear/temp/pear-build-rootLbSUWT/imagick-3.0.1/include -I/tmp/pear/temp/pear-build-rootLbSUWT/imagick-3.0.1/main -I/tmp/pear/temp/imagick -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/ImageMagick -DHAVE_CONFIG_H -g -O2 -c /tmp/pear/temp/imagick/imagick_class.c -o imagick_class.lo mkdir .libs cc -I. -I/tmp/pear/temp/imagick -DPHP_ATOM_INC -I/tmp/pear/temp/pear-build-rootLbSUWT/imagick-3.0.1/include -I/tmp/pear/temp/pear-build-rootLbSUWT/imagick-3.0.1/main -I/tmp/pear/temp/imagick -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -I/usr/include/ImageMagick -DHAVE_CONFIG_H -g -O2 -c /tmp/pear/temp/imagick/imagick_class.c -fPIC -DPIC -o .libs/imagick_class.o /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimagematteâ: /tmp/pear/temp/imagick/imagick_class.c:268:2: warning: âMagickGetImageMatteâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:82) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getsizeoffsetâ: /tmp/pear/temp/imagick/imagick_class.c:406:2: warning: passing argument 2 of âMagickGetSizeOffsetâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:87:3: note: expected âssize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_paintfloodfillimageâ: /tmp/pear/temp/imagick/imagick_class.c:1016:3: warning: âMagickPaintFloodfillImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:99) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c:1019:3: warning: âMagickPaintFloodfillImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:99) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimagepropertiesâ: /tmp/pear/temp/imagick/imagick_class.c:1083:2: warning: passing argument 3 of âMagickGetImagePropertiesâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:35:5: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimageprofilesâ: /tmp/pear/temp/imagick/imagick_class.c:1131:2: warning: passing argument 3 of âMagickGetImageProfilesâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:33:5: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_recolorimageâ: /tmp/pear/temp/imagick/imagick_class.c:1402:2: warning: âMagickRecolorImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:109) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_setfontâ: /tmp/pear/temp/imagick/imagick_class.c:1442:3: error: âstruct _php_core_globalsâ has no member named âsafe_modeâ /tmp/pear/temp/imagick/imagick_class.c:1442:3: error: âCHECKUID_CHECK_FILE_AND_DIRâ undeclared (first use in this function) /tmp/pear/temp/imagick/imagick_class.c:1442:3: note: each undeclared identifier is reported only once for each function it appears in /tmp/pear/temp/imagick/imagick_class.c:1442:3: error: âCHECKUID_NO_ERRORSâ undeclared (first use in this function) /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_queryformatsâ: /tmp/pear/temp/imagick/imagick_class.c:2580:2: warning: passing argument 2 of âMagickQueryFormatsâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:41:5: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_queryfontsâ: /tmp/pear/temp/imagick/imagick_class.c:2607:2: warning: passing argument 2 of âMagickQueryFontsâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:40:5: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_colorfloodfillimageâ: /tmp/pear/temp/imagick/imagick_class.c:3396:2: warning: âMagickColorFloodfillImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:75) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_mapimageâ: /tmp/pear/temp/imagick/imagick_class.c:3730:2: warning: âMagickMapImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:86) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_mattefloodfillimageâ: /tmp/pear/temp/imagick/imagick_class.c:3763:2: warning: âMagickMatteFloodfillImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:88) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_medianfilterimageâ: /tmp/pear/temp/imagick/imagick_class.c:3790:2: warning: âMagickMedianFilterImageâ is deprecated (declared at /usr/include/ImageMagick/wand/magick-image.h:217) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_paintopaqueimageâ: /tmp/pear/temp/imagick/imagick_class.c:3853:2: warning: âMagickPaintOpaqueImageChannelâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:104) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_painttransparentimageâ: /tmp/pear/temp/imagick/imagick_class.c:3916:2: warning: âMagickPaintTransparentImageâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:107) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_reducenoiseimageâ: /tmp/pear/temp/imagick/imagick_class.c:4059:2: warning: âMagickReduceNoiseImageâ is deprecated (declared at /usr/include/ImageMagick/wand/magick-image.h:266) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimageattributeâ: /tmp/pear/temp/imagick/imagick_class.c:5068:2: warning: âMagickGetImageAttributeâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:59) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimagechannelextremaâ: /tmp/pear/temp/imagick/imagick_class.c:5253:2: warning: âMagickGetImageChannelExtremaâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:78) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c:5253:2: warning: passing argument 3 of âMagickGetImageChannelExtremaâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:68:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/deprecate.h:78:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c:5253:2: warning: passing argument 4 of âMagickGetImageChannelExtremaâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:68:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/deprecate.h:78:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimageextremaâ: /tmp/pear/temp/imagick/imagick_class.c:5506:2: warning: âMagickGetImageExtremaâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:80) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c:5506:2: warning: passing argument 2 of âMagickGetImageExtremaâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:68:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/deprecate.h:80:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c:5506:2: warning: passing argument 3 of âMagickGetImageExtremaâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:68:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/deprecate.h:80:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimagehistogramâ: /tmp/pear/temp/imagick/imagick_class.c:5629:2: warning: passing argument 2 of âMagickGetImageHistogramâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:74:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-image.h:415:5: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimagepageâ: /tmp/pear/temp/imagick/imagick_class.c:5740:2: warning: passing argument 2 of âMagickGetImagePageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:74:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-image.h:192:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c:5740:2: warning: passing argument 3 of âMagickGetImagePageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:74:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-image.h:192:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c:5740:2: warning: passing argument 4 of âMagickGetImagePageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:74:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-image.h:192:3: note: expected âssize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c:5740:2: warning: passing argument 5 of âMagickGetImagePageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:74:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-image.h:192:3: note: expected âssize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimageindexâ: /tmp/pear/temp/imagick/imagick_class.c:6344:2: warning: âMagickGetImageIndexâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:65) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_setimageindexâ: /tmp/pear/temp/imagick/imagick_class.c:6369:2: warning: âMagickSetImageIndexâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:113) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getimagesizeâ: /tmp/pear/temp/imagick/imagick_class.c:6447:2: warning: âMagickGetImageSizeâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:140) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_setimageattributeâ: /tmp/pear/temp/imagick/imagick_class.c:6796:2: warning: âMagickSetImageAttributeâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:111) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_flattenimagesâ: /tmp/pear/temp/imagick/imagick_class.c:7043:2: warning: âMagickFlattenImagesâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:132) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_averageimagesâ: /tmp/pear/temp/imagick/imagick_class.c:8079:2: warning: âMagickAverageImagesâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:131) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_mosaicimagesâ: /tmp/pear/temp/imagick/imagick_class.c:8516:2: warning: âMagickMosaicImagesâ is deprecated (declared at /usr/include/ImageMagick/wand/deprecate.h:135) [-Wdeprecated-declarations] /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getpageâ: /tmp/pear/temp/imagick/imagick_class.c:9126:2: warning: passing argument 2 of âMagickGetPageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:84:3: note: expected âsize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c:9126:2: warning: passing argument 3 of âMagickGetPageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:84:3: note: expected âsize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c:9126:2: warning: passing argument 4 of âMagickGetPageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:84:3: note: expected âssize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c:9126:2: warning: passing argument 5 of âMagickGetPageâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:84:3: note: expected âssize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getquantumdepthâ: /tmp/pear/temp/imagick/imagick_class.c:9154:2: warning: passing argument 1 of âMagickGetQuantumDepthâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:52:4: note: expected âsize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getquantumrangeâ: /tmp/pear/temp/imagick/imagick_class.c:9176:2: warning: passing argument 1 of âMagickGetQuantumRangeâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:53:4: note: expected âsize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getsamplingfactorsâ: /tmp/pear/temp/imagick/imagick_class.c:9247:2: warning: passing argument 2 of âMagickGetSamplingFactorsâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:59:4: note: expected âsize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getsizeâ: /tmp/pear/temp/imagick/imagick_class.c:9273:2: warning: passing argument 2 of âMagickGetSizeâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:86:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c:9273:2: warning: passing argument 3 of âMagickGetSizeâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:86:3: note: expected âsize_t *â but argument is of type âlong unsigned int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_getversionâ: /tmp/pear/temp/imagick/imagick_class.c:9299:2: warning: passing argument 1 of âMagickGetVersionâ from incompatible pointer type [enabled by default] In file included from /usr/include/ImageMagick/wand/MagickWand.h:73:0, from /tmp/pear/temp/imagick/php_imagick.h:49, from /tmp/pear/temp/imagick/imagick_class.c:21: /usr/include/ImageMagick/wand/magick-property.h:55:4: note: expected âsize_t *â but argument is of type âlong int *â /tmp/pear/temp/imagick/imagick_class.c: In function âzim_imagick_setimageprogressmonitorâ: /tmp/pear/temp/imagick/imagick_class.c:9534:2: error: âstruct _php_core_globalsâ has no member named âsafe_modeâ /tmp/pear/temp/imagick/imagick_class.c:9534:2: error: âCHECKUID_CHECK_FILE_AND_DIRâ undeclared (first use in this function) /tmp/pear/temp/imagick/imagick_class.c:9534:2: error: âCHECKUID_NO_ERRORSâ undeclared (first use in this function) make: *** [imagick_class.lo] Error 1 ERROR: `make' failed

Read the article

Sendmail Failing to Forward Locally Addressed Mail to Exchange Server

- by DomainSoil

I've recently gained employment as a web developer with a small company. What they neglected to tell me upon hire was that I would be administrating the server along with my other daily duties. Now, truth be told, I'm not clueless when it comes to these things, but this is my first rodeo working with a rack server/console.. However, I'm confident that I will be able to work through any solutions you provide. Short Description: When a customer places an order via our (Magento CE 1.8.1.0) website, a copy of said order is supposed to be BCC'd to our sales manager. I say supposed because this was a working feature before the old administrator left. Long Description: Shortly after I started, we had a server crash which required a server restart. After restart, we noticed a few features on our site weren't working, but all those have been cleaned up except this one. I had to create an account on our server for root access. When a customer places an order, our sites software (Magento CE 1.8.1.0) is configured to BCC the customers order email to our sales manager. We use a Microsoft Exchange 2007 Server for our mail, which is hosted on a different machine (in-house) that I don't have access to ATM, but I'm sure I could if needed. As far as I can tell, all other external emails work.. Only INTERNAL email addresses fail to deliver. I know this because I've also tested my own internal address via our website. I set up an account with an internal email, made a test order, and never received the email. I changed my email for the account to an external GMail account, and received emails as expected. Let's dive into the logs and config's. For privacy/security reasons, names have been changed to the following: domain.com = Our Top Level Domain. email.local = Our Exchange Server. example.com = ANY other TLD. OLDadmin = Our previous Server Administrator. NEWadmin = Me. SALES@ = Our Sales Manager. Customer# = A Customer. Here's a list of the programs and config files used that hold relevant for this issue: Server: > [root@www ~]# cat /etc/centos-release CentOS release 6.3 (final) Sendmail: > [root@www ~]# sendmail -d0.1 -bt < /dev/null Version 8.14.4 ========SYSTEM IDENTITY (after readcf)======== (short domain name) $w = domain (canonical domain name) $j = domain.com (subdomain name) $m = com (node name) $k = www.domain.com > [root@www ~]# rpm -qa | grep -i sendmail sendmail-cf-8.14.4-8.e16.noarch sendmail-8.14-4-8.e16.x86_64 nslookup: > [root@www ~]# nslookup email.local Name: email.local Address: 192.168.1.50 hostname: > [root@www ~]# hostname www.domain.com /etc/mail/access: > [root@www ~]# vi /etc/mail/access Connect:localhost.localdomain RELAY Connect:localhost RELAY Connect:127.0.0.1 RELAY /etc/mail/domaintable: > [root@www ~]# vi /etc/mail/domaintable # /etc/mail/local-host-names: > [root@www ~]# vi /etc/mail/local-host-names # /etc/mail/mailertable: > [root@www ~]# vi /etc/mail/mailertable # /etc/mail/sendmail.cf: > [root@www ~]# vi /etc/mail/sendmail.cf ###################################################################### ##### ##### DO NOT EDIT THIS FILE! Only edit the source .mc file. ##### ###################################################################### ###################################################################### ##### $Id: cfhead.m4,v 8.120 2009/01/23 22:39:21 ca Exp $ ##### ##### $Id: cf.m4,v 8.32 1999/02/07 07:26:14 gshapiro Exp $ ##### ##### setup for linux ##### ##### $Id: linux.m4,v 8.13 2000/09/17 17:30:00 gshapiro Exp $ ##### ##### $Id: local_procmail.m4,v 8.22 2002/11/17 04:24:19 ca Exp $ ##### ##### $Id: no_default_msa.m4,v 8.2 2001/02/14 05:03:22 gshapiro Exp $ ##### ##### $Id: smrsh.m4,v 8.14 1999/11/18 05:06:23 ca Exp $ ##### ##### $Id: mailertable.m4,v 8.25 2002/06/27 23:23:57 gshapiro Exp $ ##### ##### $Id: virtusertable.m4,v 8.23 2002/06/27 23:23:57 gshapiro Exp $ ##### ##### $Id: redirect.m4,v 8.15 1999/08/06 01:47:36 gshapiro Exp $ ##### ##### $Id: always_add_domain.m4,v 8.11 2000/09/12 22:00:53 ca Exp $ ##### ##### $Id: use_cw_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ ##### ##### $Id: use_ct_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ ##### ##### $Id: local_procmail.m4,v 8.22 2002/11/17 04:24:19 ca Exp $ ##### ##### $Id: access_db.m4,v 8.27 2006/07/06 21:10:10 ca Exp $ ##### ##### $Id: blacklist_recipients.m4,v 8.13 1999/04/02 02:25:13 gshapiro Exp $ ##### ##### $Id: accept_unresolvable_domains.m4,v 8.10 1999/02/07 07:26:07 gshapiro Exp $ ##### ##### $Id: masquerade_envelope.m4,v 8.9 1999/02/07 07:26:10 gshapiro Exp $ ##### ##### $Id: masquerade_entire_domain.m4,v 8.9 1999/02/07 07:26:10 gshapiro Exp $ ##### ##### $Id: proto.m4,v 8.741 2009/12/11 00:04:53 ca Exp $ ##### # level 10 config file format V10/Berkeley # override file safeties - setting this option compromises system security, # addressing the actual file configuration problem is preferred # need to set this before any file actions are encountered in the cf file #O DontBlameSendmail=safe # default LDAP map specification # need to set this now before any LDAP maps are defined #O LDAPDefaultSpec=-h localhost ################## # local info # ################## # my LDAP cluster # need to set this before any LDAP lookups are done (including classes) #D{sendmailMTACluster}$m Cwlocalhost # file containing names of hosts for which we receive email Fw/etc/mail/local-host-names # my official domain name # ... define this only if sendmail cannot automatically determine your domain #Dj$w.Foo.COM # host/domain names ending with a token in class P are canonical CP. # "Smart" relay host (may be null) DSemail.local # operators that cannot be in local usernames (i.e., network indicators) CO @ % ! # a class with just dot (for identifying canonical names) C.. # a class with just a left bracket (for identifying domain literals) C[[ # access_db acceptance class C{Accept}OK RELAY C{ResOk}OKR # Hosts for which relaying is permitted ($=R) FR-o /etc/mail/relay-domains # arithmetic map Karith arith # macro storage map Kmacro macro # possible values for TLS_connection in access map C{Tls}VERIFY ENCR # who I send unqualified names to if FEATURE(stickyhost) is used # (null means deliver locally) DRemail.local. # who gets all local email traffic # ($R has precedence for unqualified names if FEATURE(stickyhost) is used) DHemail.local. # dequoting map Kdequote dequote # class E: names that should be exposed as from this host, even if we masquerade # class L: names that should be delivered locally, even if we have a relay # class M: domains that should be converted to $M # class N: domains that should not be converted to $M #CL root C{E}root C{w}localhost.localdomain C{M}domain.com # who I masquerade as (null for no masquerading) (see also $=M) DMdomain.com # my name for error messages DnMAILER-DAEMON # Mailer table (overriding domains) Kmailertable hash -o /etc/mail/mailertable.db # Virtual user table (maps incoming users) Kvirtuser hash -o /etc/mail/virtusertable.db CPREDIRECT # Access list database (for spam stomping) Kaccess hash -T<TMPF> -o /etc/mail/access.db # Configuration version number DZ8.14.4 /etc/mail/sendmail.mc: > [root@www ~]# vi /etc/mail/sendmail.mc divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # /etc/mail/make dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for linux')dnl OSTYPE(`linux')dnl dnl # dnl # Do not advertize sendmail version. dnl # dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl dnl # dnl # default logging level is 9, you might want to set it higher to dnl # debug the configuration dnl # dnl define(`confLOG_LEVEL', `9')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # define(`SMART_HOST', `email.local')dnl dnl # define(`confDEF_USER_ID', ``8:12'')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST', `True')dnl define(`confDONT_PROBE_INTERFACES', `True')dnl define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/aliases')dnl define(`STATUS_FILE', `/var/log/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # Please remember that saslauthd needs to be running for AUTH. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # cd /etc/pki/tls/certs; make sendmail.pem dnl # Complete usage: dnl # make -C /etc/pki/tls/certs usage dnl # dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa', `dnl')dnl FEATURE(`smrsh', `/usr/sbin/smrsh')dnl FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The following limits the number of processes sendmail can fork to accept dnl # incoming messages or process its message queues to 20.) sendmail refuses dnl # to accept connections once it has reached its quota of child processes. dnl # dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl dnl # dnl # Limits the number of new connections per second. This caps the overhead dnl # incurred due to forking new sendmail processes. May be useful against dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address dnl # limit would be useful but is not available as an option at this writing.) dnl # dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment dnl # the following 2 definitions and activate below in the MAILER section the dnl # cyrusv2 mailer. dnl # dnl define(`confLOCAL_MAILER', `cyrusv2')dnl dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # enable both ipv6 and ipv4 in sendmail: dnl # dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6') dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # MASQUERADE_AS(`domain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # FEATURE(masquerade_entire_domain)dnl dnl # MASQUERADE_DOMAIN(domain.com)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl MAILER(cyrusv2)dnl /etc/mail/trusted-users: > [root@www ~]# vi /etc/mail/trusted-users # /etc/mail/virtusertable: > [root@www ~]# vi /etc/mail/virtusertable [email protected] [email protected] [email protected] [email protected] /etc/hosts: > [root@www ~]# vi /etc/hosts 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 192.168.1.50 email.local I've only included the "local info" part of sendmail.cf, to save space. If there are any files that I've missed, please advise so I may produce them. Now that that's out of the way, lets look at some entries from /var/log/maillog. The first entry is from an order BEFORE the crash, when the site was working as expected. ##Order 200005374 Aug 5, 2014 7:06:38 AM## Aug 5 07:06:39 www sendmail[26149]: s75C6dqB026149: from=OLDadmin, size=11091, class=0, nrcpts=2, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 07:06:39 www sendmail[26150]: s75C6dXe026150: from=<[email protected]>, size=11257, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 07:06:39 www sendmail[26149]: s75C6dqB026149: [email protected],=?utf-8?B?dGhvbWFzICBHaWxsZXNwaWU=?= <[email protected]>, ctladdr=OLDadmin (501/501), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=71091, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75C6dXe026150 Message accepted for delivery) Aug 5 07:06:40 www sendmail[26152]: s75C6dXe026150: to=<[email protected]>,<[email protected]>, delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=161257, relay=email.local. [192.168.1.50], dsn=2.0.0, stat=Sent ( <[email protected]> Queued mail for delivery) This next entry from maillog is from an order AFTER the crash. ##Order 200005375 Aug 5, 2014 9:45:25 AM## Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: from=OLDadmin, size=11344, class=0, nrcpts=2, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 09:45:26 www sendmail[30022]: s75EjQm1030022: <[email protected]>... User unknown Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: [email protected], ctladdr=OLDadmin (501/501), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=71344, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm1030022: from=<[email protected]>, size=11500, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: to==?utf-8?B?S2VubmV0aCBCaWViZXI=?= <[email protected]>, ctladdr=OLDadmin (501/501), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=71344, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75EjQm1030022 Message accepted for delivery) Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: s75EjQ4P030021: DSN: User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm3030022: <[email protected]>... User unknown Aug 5 09:45:26 www sendmail[30021]: s75EjQ4P030021: to=OLDadmin, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=42368, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm3030022: from=<>, size=12368, class=0, nrcpts=0, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:45:26 www sendmail[30021]: s75EjQ4P030021: s75EjQ4Q030021: return to sender: User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm5030022: from=<>, size=14845, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:45:26 www sendmail[30021]: s75EjQ4Q030021: to=postmaster, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=43392, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75EjQm5030022 Message accepted for delivery) Aug 5 09:45:26 www sendmail[30025]: s75EjQm5030022: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=45053, dsn=2.0.0, stat=Sent Aug 5 09:45:27 www sendmail[30024]: s75EjQm1030022: to=<[email protected]>, delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=131500, relay=email.local. [192.168.1.50], dsn=2.0.0, stat=Sent ( <[email protected]> Queued mail for delivery) To add a little more, I think I've pinpointed the actual crash event. ##THE CRASH## Aug 5 09:39:46 www sendmail[3251]: restarting /usr/sbin/sendmail due to signal Aug 5 09:39:46 www sm-msp-queue[3260]: restarting /usr/sbin/sendmail due to signal Aug 5 09:39:46 www sm-msp-queue[29370]: starting daemon (8.14.4): queueing@01:00:00 Aug 5 09:39:47 www sendmail[29372]: starting daemon (8.14.4): SMTP+queueing@01:00:00 Aug 5 09:40:02 www sendmail[29465]: s75Ee2vT029465: Authentication-Warning: www.domain.com: OLDadmin set sender to root using -f Aug 5 09:40:02 www sendmail[29464]: s75Ee2IF029464: Authentication-Warning: www.domain.com: OLDadmin set sender to root using -f Aug 5 09:40:02 www sendmail[29465]: s75Ee2vT029465: from=root, size=1426, class=0, nrcpts=1, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 09:40:02 www sendmail[29464]: s75Ee2IF029464: from=root, size=1426, class=0, nrcpts=1, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 09:40:02 www sendmail[29466]: s75Ee23t029466: from=<[email protected]>, size=1784, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:40:02 www sendmail[29466]: s75Ee23t029466: to=<[email protected]>, delay=00:00:00, mailer=local, pri=31784, dsn=4.4.3, stat=queued Aug 5 09:40:02 www sendmail[29467]: s75Ee2wh029467: from=<[email protected]>, size=1784, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:40:02 www sendmail[29467]: s75Ee2wh029467: to=<[email protected]>, delay=00:00:00, mailer=local, pri=31784, dsn=4.4.3, stat=queued Aug 5 09:40:02 www sendmail[29464]: s75Ee2IF029464: to=OLDadmin, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31426, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75Ee23t029466 Message accepted for delivery) Aug 5 09:40:02 www sendmail[29465]: s75Ee2vT029465: to=OLDadmin, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31426, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75Ee2wh029467 Message accepted for delivery) Aug 5 09:40:06 www sm-msp-queue[29370]: restarting /usr/sbin/sendmail due to signal Aug 5 09:40:06 www sendmail[29372]: restarting /usr/sbin/sendmail due to signal Aug 5 09:40:06 www sm-msp-queue[29888]: starting daemon (8.14.4): queueing@01:00:00 Aug 5 09:40:06 www sendmail[29890]: starting daemon (8.14.4): SMTP+queueing@01:00:00 Aug 5 09:40:06 www sendmail[29891]: s75Ee23t029466: to=<[email protected]>, delay=00:00:04, mailer=local, pri=121784, dsn=5.1.1, stat=User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee23t029466: s75Ee6xY029891: DSN: User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee6xY029891: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=33035, dsn=2.0.0, stat=Sent Aug 5 09:40:06 www sendmail[29891]: s75Ee2wh029467: to=<[email protected]>, delay=00:00:04, mailer=local, pri=121784, dsn=5.1.1, stat=User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee2wh029467: s75Ee6xZ029891: DSN: User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee6xZ029891: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=33035, dsn=2.0.0, stat=Sent Something to note about the maillog's: Before the crash, the msgid included localhost.localdomain; after the crash it's been domain.com. Thanks to all who take the time to read and look into this issue. I appreciate it and look forward to tackling this issue together.

Read the article

add a from to backup routine

- by Gerard Flynn

hi how do you put a process bar and button onto this code i have class and want to add a gui on to the code using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; using System.Data.SqlClient; using System.IO; using System.Threading; using Tamir.SharpSsh; using System.Security.Cryptography; using ICSharpCode.SharpZipLib.Checksums; using ICSharpCode.SharpZipLib.Zip; using ICSharpCode.SharpZipLib.GZip; namespace backup { public partial class Form1 : Form { public Form1() { InitializeComponent(); } /// <summary> /// Summary description for Class1. /// </summary> public class Backup { private string dbName; private string dbUsername; private string dbPassword; private static string baseDir; private string backupName; private static bool isBackup; private string keyString; private string ivString; private string[] backupDirs = new string[0]; private string[] excludeDirs = new string[0]; private ZipOutputStream zipOutputStream; private string backupFile; private string zipFile; private string encryptedFile; static void Main() { Backup.Log("BackupUtility loaded"); try { new Backup(); if (!isBackup) MessageBox.Show("Restore complete"); } catch (Exception e) { Backup.Log(e.ToString()); if (!isBackup) MessageBox.Show("Error restoring!\r\n" + e.Message); } } private void LoadAppSettings() { this.backupName = System.Configuration.ConfigurationSettings.AppSettings["BackupName"].ToString(); this.dbName = System.Configuration.ConfigurationSettings.AppSettings["DBName"].ToString(); this.dbUsername = System.Configuration.ConfigurationSettings.AppSettings["DBUsername"].ToString(); this.dbPassword = System.Configuration.ConfigurationSettings.AppSettings["DBPassword"].ToString(); //default to using where we are executing this assembly from Backup.baseDir = System.Reflection.Assembly.GetExecutingAssembly().Location.Substring(0, System.Reflection.Assembly.GetExecutingAssembly().Location.LastIndexOf("\\")) + "\\"; Backup.isBackup = bool.Parse(System.Configuration.ConfigurationSettings.AppSettings["IsBackup"].ToString()); this.keyString = System.Configuration.ConfigurationSettings.AppSettings["KeyString"].ToString(); this.ivString = System.Configuration.ConfigurationSettings.AppSettings["IVString"].ToString(); this.backupDirs = GetSetting("BackupDirs", ','); this.excludeDirs = GetSetting("ExcludeDirs", ','); } private string[] GetSetting(string settingName, char delimiter) { if (System.Configuration.ConfigurationSettings.AppSettings[settingName] != null) { string settingVal = System.Configuration.ConfigurationSettings.AppSettings[settingName].ToString(); if (settingVal.Length > 0) return settingVal.Split(delimiter); } return new string[0]; } public Backup() { this.LoadAppSettings(); if (isBackup) this.DoBackup(); else this.DoRestore(); Log("Finished"); } private void DoRestore() { System.Windows.Forms.OpenFileDialog fileDialog = new System.Windows.Forms.OpenFileDialog(); fileDialog.Title = "Choose .encrypted file"; fileDialog.Filter = "Encrypted files (*.encrypted)|*.encrypted|All files (*.*)|*.*"; fileDialog.InitialDirectory = Backup.baseDir; if (fileDialog.ShowDialog() == System.Windows.Forms.DialogResult.OK) { //string encryptedFile = GetFileName("encrypted"); string encryptedFile = fileDialog.FileName; string decryptedFile = this.GetDecryptedFilename(encryptedFile); //string originalFile = GetFileName("original"); this.Decrypt(encryptedFile, decryptedFile); //this.UnzipFile(decryptedFile, originalFile); } } //use the same filename as the backup except replace ".encrypted" with ".decrypted.zip" private string GetDecryptedFilename(string encryptedFile) { string name = encryptedFile.Substring(0, encryptedFile.LastIndexOf(".")); name += ".decrypted.zip"; return name; } private void DoBackup() { this.backupFile = GetFileName("bak"); this.zipFile = GetFileName("zip"); this.encryptedFile = GetFileName("encrypted"); this.DeleteFiles(); this.zipOutputStream = new ZipOutputStream(File.Create(zipFile)); try { //backup database first if (this.dbName.Length > 0) { this.BackupDB(backupFile); this.ZipFile(backupFile, this.GetName(backupFile)); } //zip any directories specified in config file this.ZipUserSpecifiedFilesAndDirectories(this.backupDirs); } finally { this.zipOutputStream.Finish(); this.zipOutputStream.Close(); } this.Encrypt(zipFile, encryptedFile); this.SCPFile(encryptedFile); this.DeleteFiles(); } /// <summary> /// Deletes any files created by the backup process, namely the DB backup file, /// the zip of all files backuped up, and the encrypred zip file /// </summary> private void DeleteFiles() { File.Delete(this.backupFile); File.Delete(this.zipFile); ///File.Delete(this.encryptedFile); } private void ZipUserSpecifiedFilesAndDirectories(string[] fileNames) { foreach (string fileName in fileNames) { string name = fileName.Trim(); if (name.Length > 0) { Log("Zipping " + name); this.ZipFile(name, this.GetNameFromDir(name)); } } } private void SCPFile(string inputPath) { string sshServer = System.Configuration.ConfigurationSettings.AppSettings["SSHServer"].ToString(); string sshUsername = System.Configuration.ConfigurationSettings.AppSettings["SSHUsername"].ToString(); string sshPassword = System.Configuration.ConfigurationSettings.AppSettings["SSHPassword"].ToString(); if (sshServer.Length > 0 && sshUsername.Length > 0 && sshPassword.Length > 0) { Scp scp = new Scp(sshServer, sshUsername, sshPassword); //Copy a file from local machine to remote SSH server scp.Connect(); Log("Connected to " + sshServer); //scp.Put(inputPath, "/home/wal/temp.txt"); scp.Put(inputPath, GetName(inputPath)); scp.Close(); } else { Log("Not SCP as missing login details"); } } private string GetName(string inputPath) { FileInfo info = new FileInfo(inputPath); return info.Name; } private string GetNameFromDir(string inputPath) { DirectoryInfo info = new DirectoryInfo(inputPath); return info.Name; } private static void Log(string msg) { try { string toLog = DateTime.Now.ToString() + ": " + msg; System.Diagnostics.Debug.WriteLine(toLog); System.IO.FileStream fs = new System.IO.FileStream(baseDir + "app.log", System.IO.FileMode.OpenOrCreate, System.IO.FileAccess.ReadWrite); System.IO.StreamWriter m_streamWriter = new System.IO.StreamWriter(fs); m_streamWriter.BaseStream.Seek(0, System.IO.SeekOrigin.End); m_streamWriter.WriteLine(toLog); m_streamWriter.Flush(); m_streamWriter.Close(); fs.Close(); } catch (Exception e) { Console.WriteLine(e.ToString()); } } private byte[] GetFileBytes(string path) { FileStream stream = new FileStream(path, FileMode.Open); byte[] bytes = new byte[stream.Length]; stream.Read(bytes, 0, bytes.Length); stream.Close(); return bytes; } private void WriteFileBytes(byte[] bytes, string path) { FileStream stream = new FileStream(path, FileMode.Create); stream.Write(bytes, 0, bytes.Length); stream.Close(); } private void UnzipFile(string inputPath, string outputPath) { ZipInputStream zis = new ZipInputStream(File.OpenRead(inputPath)); ZipEntry theEntry = zis.GetNextEntry(); FileStream streamWriter = File.Create(outputPath); int size = 2048; byte[] data = new byte[2048]; while (true) { size = zis.Read(data, 0, data.Length); if (size > 0) { streamWriter.Write(data, 0, size); } else { break; } } streamWriter.Close(); zis.Close(); } private bool ExcludeDir(string dirName) { foreach (string excludeDir in this.excludeDirs) { if (dirName == excludeDir) return true; } return false; } private void ZipFile(string inputPath, string zipName) { FileAttributes fa = File.GetAttributes(inputPath); if ((fa & FileAttributes.Directory) != 0) { string dirName = zipName + "/"; ZipEntry entry1 = new ZipEntry(dirName); this.zipOutputStream.PutNextEntry(entry1); string[] subDirs = Directory.GetDirectories(inputPath); //create directories first foreach (string subDir in subDirs) { DirectoryInfo info = new DirectoryInfo(subDir); string name = info.Name; if (this.ExcludeDir(name)) Log("Excluding " + dirName + name); else this.ZipFile(subDir, dirName + name); } //then store files string[] fileNames = Directory.GetFiles(inputPath); foreach (string fileName in fileNames) { FileInfo info = new FileInfo(fileName); string name = info.Name; this.ZipFile(fileName, dirName + name); } } else { Crc32 crc = new Crc32(); this.zipOutputStream.SetLevel(6); // 0 - store only to 9 - means best compression FileStream fs = null; try { fs = File.OpenRead(inputPath); } catch (IOException ioEx) { Log("WARNING! " + ioEx.Message);//might be in use, skip file in this case } if (fs != null) { byte[] buffer = new byte[fs.Length]; fs.Read(buffer, 0, buffer.Length); ZipEntry entry = new ZipEntry(zipName); entry.DateTime = DateTime.Now; // set Size and the crc, because the information // about the size and crc should be stored in the header // if it is not set it is automatically written in the footer. // (in this case size == crc == -1 in the header) // Some ZIP programs have problems with zip files that don't store // the size and crc in the header. entry.Size = fs.Length; fs.Close(); crc.Reset(); crc.Update(buffer); entry.Crc = crc.Value; this.zipOutputStream.PutNextEntry(entry); this.zipOutputStream.Write(buffer, 0, buffer.Length); } } } private void Encrypt(string inputPath, string outputPath) { RijndaelManaged rijndaelManaged = new RijndaelManaged(); byte[] encrypted; byte[] toEncrypt; //Create a new key and initialization vector. //myRijndael.GenerateKey(); //myRijndael.GenerateIV(); /*des.GenerateKey(); des.GenerateIV(); string temp1 = Convert.ToBase64String(des.Key); string temp2 = Convert.ToBase64String(des.IV);*/ //Get the key and IV. byte[] key = Convert.FromBase64String(keyString); byte[] IV = Convert.FromBase64String(ivString); //Get an encryptor. ICryptoTransform encryptor = rijndaelManaged.CreateEncryptor(key, IV); //Encrypt the data. MemoryStream msEncrypt = new MemoryStream(); CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write); //Convert the data to a byte array. toEncrypt = this.GetFileBytes(inputPath); //Write all data to the crypto stream and flush it. csEncrypt.Write(toEncrypt, 0, toEncrypt.Length); csEncrypt.FlushFinalBlock(); //Get encrypted array of bytes. encrypted = msEncrypt.ToArray(); WriteFileBytes(encrypted, outputPath); } private void Decrypt(string inputPath, string outputPath) { RijndaelManaged myRijndael = new RijndaelManaged(); //DES des = new DESCryptoServiceProvider(); byte[] key = Convert.FromBase64String(keyString); byte[] IV = Convert.FromBase64String(ivString); byte[] encrypted = this.GetFileBytes(inputPath); byte[] fromEncrypt; //Get a decryptor that uses the same key and IV as the encryptor. ICryptoTransform decryptor = myRijndael.CreateDecryptor(key, IV); //Now decrypt the previously encrypted message using the decryptor // obtained in the above step. MemoryStream msDecrypt = new MemoryStream(encrypted); CryptoStream csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read); fromEncrypt = new byte[encrypted.Length]; //Read the data out of the crypto stream. int bytesRead = csDecrypt.Read(fromEncrypt, 0, fromEncrypt.Length); byte[] readBytes = new byte[bytesRead]; Array.Copy(fromEncrypt, 0, readBytes, 0, bytesRead); this.WriteFileBytes(readBytes, outputPath); } private string GetFileName(string extension) { return baseDir + backupName + "_" + DateTime.Now.ToString("yyyyMMdd") + "." + extension; } private void BackupDB(string backupPath) { string sql = @"DECLARE @Date VARCHAR(300), @Dir VARCHAR(4000) --Get today date SET @Date = CONVERT(VARCHAR, GETDATE(), 112) --Set the directory where the back up file is stored SET @Dir = '"; sql += backupPath; sql += @"' --create a 'device' to write to first EXEC sp_addumpdevice 'disk', 'temp_device', @Dir --now do the backup BACKUP DATABASE " + this.dbName; sql += @" TO temp_device WITH FORMAT --Drop the device EXEC sp_dropdevice 'temp_device' "; //Console.WriteLine("sql="+sql); Backup.Log("Starting backup of " + this.dbName); ExecuteSQL(sql); } /// <summary> /// Executes the specified SQL /// Returns true if no errors were encountered during execution /// </summary> /// <param name="procedureName"></param> private void ExecuteSQL(string sql) { SqlConnection conn = new SqlConnection(this.GetDBConnectString()); try { SqlCommand comm = new SqlCommand(sql, conn); conn.Open(); comm.ExecuteNonQuery(); } finally { conn.Close(); } } private string GetDBConnectString() { StringBuilder builder = new StringBuilder(); builder.Append("Data Source=127.0.0.1; User ID="); builder.Append(this.dbUsername); builder.Append("; Password="); builder.Append(this.dbPassword); builder.Append("; Initial Catalog="); builder.Append(this.dbName); builder.Append(";Connect Timeout=30"); return builder.ToString(); } } } }

Read the article

?Exadata??????DBFS

- by Liu Maclean(???)

?Exadata???DBFS ??????? 1. ??fuse RPM [root@dm01db01 ~]# yum install fuse Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse x86_64 2.7.4-8.0.1.el5 el5_latest 85 k Transaction Summary ======================================================================================================================================================================== Install 1 Package(s) Upgrade 0 Package(s) Total download size: 85 k Is this ok [y/N]: y Downloading Packages: fuse-2.7.4-8.0.1.el5.x86_64.rpm | 85 kB 00:00 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse 1/1 Installed: fuse.x86_64 0:2.7.4-8.0.1.el5 [root@dm01db01 ~]# yum install fuse-libs Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse-libs.i386 0:2.7.4-8.0.1.el5 set to be updated ---> Package fuse-libs.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse-libs i386 2.7.4-8.0.1.el5 el5_latest 71 k fuse-libs x86_64 2.7.4-8.0.1.el5 el5_latest 70 k Transaction Summary ======================================================================================================================================================================== Install 2 Package(s) Upgrade 0 Package(s) Total download size: 141 k Is this ok [y/N]: y Downloading Packages: (1/2): fuse-libs-2.7.4-8.0.1.el5.x86_64.rpm | 70 kB 00:00 (2/2): fuse-libs-2.7.4-8.0.1.el5.i386.rpm | 71 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 71 kB/s | 141 kB 00:01 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse-libs 1/2 Installing : fuse-libs 2/2 Installed: fuse-libs.i386 0:2.7.4-8.0.1.el5 fuse-libs.x86_64 0:2.7.4-8.0.1.el5 Complete! [root@dm01db01 ~]# yum install fuse-devel Loaded plugins: rhnplugin, security This system is not registered with ULN. ULN support will be disabled. Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package fuse-devel.i386 0:2.7.4-8.0.1.el5 set to be updated ---> Package fuse-devel.x86_64 0:2.7.4-8.0.1.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: fuse-devel i386 2.7.4-8.0.1.el5 el5_latest 28 k fuse-devel x86_64 2.7.4-8.0.1.el5 el5_latest 28 k Transaction Summary ======================================================================================================================================================================== Install 2 Package(s) Upgrade 0 Package(s) Total download size: 57 k Is this ok [y/N]: y Downloading Packages: (1/2): fuse-devel-2.7.4-8.0.1.el5.x86_64.rpm | 28 kB 00:00 (2/2): fuse-devel-2.7.4-8.0.1.el5.i386.rpm | 28 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 21 kB/s | 57 kB 00:02 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : fuse-devel 1/2 Installing : fuse-devel 2/2 Installed: fuse-devel.i386 0:2.7.4-8.0.1.el5 fuse-devel.x86_64 0:2.7.4-8.0.1.el5 Complete! 2. ?? DBFS??? ?????? cd $ORACLE_HOME/rdbms/admin sqlplus / as sysdba Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> @prvtfspi.plb Package body created. No errors. Package body created. No errors. ?????dbms_dbfs_sfs package SQL> create tablespace dbfstbs datafile size 20g; Tablespace created. SQL> create user maclean_dbfs identified by oracle; User created. SQL> grant dba to maclean_dbfs; Grant succeeded. @@!!! SQL> grant dbfs_role to maclean_dbfs; Grant succeeded. 3. ??DBFS SQL> conn maclean_dbfs/oracle Connected. SQL> @?/rdbms/admin/dbfs_create_filesystem.sql dbfstbs mac_dbfs No errors. -------- CREATE STORE: begin dbms_dbfs_sfs.createFilesystem(store_name => 'FS_MAC_DBFS', tbl_name => 'T_MAC_DBFS', tbl_tbs => 'dbfstbs', lob_tbs => 'dbfstbs', do_partition => false, partition_key => 1, do_compress => false, compression => '', do_dedup => false, do_encrypt => false); end; -------- REGISTER STORE: begin dbms_dbfs_content.registerStore(store_name=> 'FS_MAC_DBFS', provider_name => 'sample1', provider_package => 'dbms_dbfs_sfs'); end; -------- MOUNT STORE: begin dbms_dbfs_content.mountStore(store_name=>'FS_MAC_DBFS', store_mount=>'mac_dbfs'); end; -------- CHMOD STORE: declare m integer; begin m := dbms_fuse.fs_chmod('/mac_dbfs', 16895); end; No errors. 4. ??mount point [root@dm01db01 ~]# mkdir /dbfs [root@dm01db01 ~]# chown oracle:oinstall /dbfs 5. ??library path ?OS # echo "/usr/local/lib" >> /etc/ld.so.conf.d/usr_local_lib.conf 6. ?????? export ORACLE_HOME=/s01/orabase/product/11.2.0/dbhome_1 [root@dm01db01 ~]# ln -s $ORACLE_HOME/lib/libclntsh.so.11.1 /usr/local/lib/libclntsh.so.11.1 [root@dm01db01 ~]# ln -s $ORACLE_HOME/lib/libnnz11.so /usr/local/lib/libnnz11.so [root@dm01db01 ~]# ln -s /lib64/libfuse.so.2 /usr/local/lib/libfuse.so.2 7. ??ldconfig [root@dm01db01 ~]# ldconfig [root@dm01db01 ~]# 8. ??fusermount??????? [root@dm01db01 ~]# chmod +x /usr/bin/fusermount [root@dm01db01 ~]# ls -l /usr/bin/fusermount lrwxrwxrwx 1 root root 15 Sep 7 03:06 /usr/bin/fusermount -> /bin/fusermount [root@dm01db01 ~]# ls -l /bin/fusermount -rwsr-x--x 1 root fuse 27072 Oct 17 2011 /bin/fusermount 9. ???????OS dbfs_client maclean_dbfs@dm01db01:1521/orcl /dbfs 10. ????nohup + &?????mount DBFS,???????????? [oracle@dm01db01 ~]$ echo "oracle" >> dbfs_pw [oracle@dm01db01 ~]$ nohup dbfs_client maclean_dbfs@dm01db01:1521/orcl /dbfs < dbfs_pw & [oracle@dm01db01 ~]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VGExaDb-LVDbSys1 30G 15G 14G 53% / /dev/sda1 502M 30M 447M 7% /boot /dev/mapper/VGExaDb-LVDbOra1 99G 20G 75G 21% /u01 tmpfs 81G 0 81G 0% /dev/shm dbfs-maclean_dbfs@orcl:/ 20G 120K 20G 1% /dbfs [oracle@dm01db01 ~]$ mount /dev/mapper/VGExaDb-LVDbSys1 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sda1 on /boot type ext3 (rw,nodev) /dev/mapper/VGExaDb-LVDbOra1 on /u01 type ext3 (rw,nodev) tmpfs on /dev/shm type tmpfs (rw,size=82052m) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) dbfs-maclean_dbfs@orcl:/ on /dbfs type fuse (rw,nosuid,nodev,max_read=1048576,default_permissions,user=oracle) [oracle@dm01db01 ~]$ ls -l /dbfs/ total 0 drwxrwxrwx 3 root root 0 Sep 14 05:11 mac_dbfs [oracle@nas ~]$ dbfs_client --------MOUNT mode: usage: dbfs_client <db_user>@<db_server> [options] <mountpoint> db_user: Name of Database user that owns DBFS content repository filesystem(s) db_server: A valid connect string for Oracle database server (for example, hrdb_host:1521/hrservice) mountpoint: Path to mount Database File System(s) All the file systems owned by the database user will be seen at the mountpoint. DBFS options: -o direct_io Bypass the Linux page cache. Gives much better performance for large files. Programs in the file system cannot be executed with this option. This option is recommended when DBFS is used as an ETL staging area. -o wallet Run dbfs_client in background. Wallet must be configured to get credentials. -o failover dbfs_client fails over to surviving database instance with no data loss. Some performance cost on writes, especially for small files. -o allow_root Allows root access to the filesystem. This option requires setting 'user_allow_other' parameter in '/etc/fuse.conf'. -o allow_other Allows other users access to the file system. This option requires setting 'user_allow_other' parameter in '/etc/fuse.conf'. -o rw Mount the filesystem read-write. [Default] -o ro Mount the filesystem read-only. Files cannot be modified. -o trace_file=STR Tracing <filename> | 'syslog' -o trace_level=N Trace Level: 1->DEBUG, 2->INFO, 3->WARNING, 4->ERROR, 5->CRITICAL [Default: 4] -h help -V version --------COMMAND mode: Usage: dbfs_client <db_user>@<db_server> --command command [switches] [arguments] command: Command to be executed, e.g., ls, cp, mkdir, rm switches: Switches are described below for each command. arguments: File names or directory names NOTE: All database pathnames must be absolute and preceded by dbfs:/ Commands ls dbfs_client <db_user>@<db_server> --command ls [switches] target Switches: -a Show all files including those starting with '.' -l Use a long listing format. In addition to the name of each file print the file type, permissions, size, user and group information -R List subdirectories recursively cp dbfs_client <db_user>@<db_server> --command cp [switches] source destination Switches: -r, -R Copy a directory and its contents recursively into the destination directory rm dbfs_client <db_user>@<db_server> --command rm [switches] target Switches: -r, -R Removes a directory and its contents recursively mkdir dbfs_client <db_user>@<db_server> --command mkdir directory_name Examples dbfs_client ETLUser@DBConnectString --command ls -l -a dbfs:/staging_area/directory1 dbfs_client ETLUser@DBConnectString --command cp -R /tmp/1-Jan-2009-dump dbfs:/staging_area dbfs_client ETLUser@DBConnectString --command rm dbfs:/staging_area/hello.txt dbfs_client ETLUser@DBConnectString --command mkdir dbfs:/staging_area/directory2 [oracle@dm01db01 ~]$ ls -lh /tmp/largefile -rw-r--r-- 1 oracle oinstall 2.0G Sep 14 08:50 /tmp/largefile [oracle@dm01db01 ~]$ time dbfs_client maclean_dbfs@dm01db01:1521/orcl --command cp /tmp/largefile dbfs:/mac_dbfs Password: /tmp/largefile -> dbfs:/mac_dbfs/largefile real 0m11.802s user 0m0.580s sys 0m2.375s ?Exadata?????2G?????? DBFS???11s => 200MB/s

Read the article

Can ping device from one computer and not the other

- by Sean Duggan

I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

Read the article

Address book with C programming; cannot compile my code.

- by osabri

I've divided my code into small programs so it can be easy to excute /* ab_error.c : in case of errors following messages will be displayed */ #include "adressbook.h" static char *errormsg[] = { "", "\nNot enough space on disk", "\nCannot open file", "\nCannot read file", "\nCannot write file" }; void check(int error) { switch(error) { case 0: return; case 1: write_file(); case 2: case 3: case 4: system("cls"); fputs(errormsg[error], stderr); exit(error); } } 2nd /* ab_fileio.c : functions for file input/output */ #include "adressbook.h" static char ab_file[] = "ADRESSBOOK.DAT"; //file to save the entries int read_file(void) { int error = 0; FILE *fp; ELEMENT *new_e, *last_e = NULL; DATA buffer; if( (fp = fopen(ab_file, "rb")) == NULL) return -1; //no file found while (fread(&buffer, sizeof(DATA), 1, fp) == 1) //reads one list element after another { if( (new_e = make_element()) == NULL) { error = 1; break; //not enough space } new_e->person = buffer; //copy data to new element new_e->next = NULL; if(hol.first == NULL) //list is empty? hol.first = new_e; //yes else last_e->next = new_e; //no last_e = new_e; ++hol.amount; } if( !error && !feof(fp) ) error = 3; //cannot read file fclose(fp); return error; } /*-------------------------------*/ int write_file(void) { int error = 0; FILE *fp; ELEMENT *p; if( (p = hol.first) == NULL) return 0; //list is empty if( (fp = fopen(ab_file, "wb")) == NULL) return 2; //cannot open while( p!= NULL) { if( fwrite(&p->person, sizeof(DATA), 1, fp) < 1) { error = 4; break; //cannot write } p = p->next; } fclose(fp); return error; } 3rd /* ab_list.c : functions to manipulate the list */ #include "adressbook.h" HOL hol = {0, NULL}; //global definition for head of list /* -------------------- */ ELEMENT *make_element(void) { return (ELEMENT *)malloc( sizeof(ELEMENT) ); } /* -------------------- */ int ins_element( DATA *newdata) { ELEMENT *new_e, *pre_p; if((new_e = make_element()) == NULL) return 1; new_e ->person = *newdata; // copy data to new element pre_p = search(new_e->person.family_name); if(pre_p == NULL) //no person in list { new_e->next = hol.first; //put it to the begin hol.first = new_e; } else { new_e->next = pre_p->next; pre_p->next = new_e; } ++hol.amount; return 0; } int erase_element( char name, char surname ) { return 0; } /* ---------------------*/ ELEMENT *search(char *name) { ELEMENT *sp, *retp; //searchpointer, returnpointer retp = NULL; sp = hol.first; while(sp != NULL && sp->person.family_name != name) { retp = sp; sp = sp->next; } return(retp); } 4th /* ab_screen.c : functions for printing information on screen */ #include "adressbook.h" #include <conio.h> #include <ctype.h> /* standard prompts for in- and output */ static char pgmname[] = "---- Oussama's Adressbook made in splendid C ----"; static char options[] = "\ 1: Enter new adress\n\n\ 2: Delete entry\n\n\ 3: Change entry\n\n\ 4: Print adress\n\n\ Esc: Exit\n\n\n\ Your choice . . .: "; static char prompt[] = "\ Name . . . .:\n\ Surname . . :\n\n\ Street . . .:\n\n\ House number:\n\n\ Postal code :\n\n\ Phone number:"; static char buttons[] = "\ <Esc> = cancel input <Backspace> = correct input\ <Return> = assume"; static char headline[] = "\ Name Surname Street House Postal code Phone number \n\ ------------------------------------------------------------------------"; static char further[] = "\ -------- continue with any key --------"; /* ---------------------------------- */ int menu(void) //show menu and read user input { int c; system ("cls"); set_cur(0,20); puts(pgmname); set_cur(6,0); printf("%s", options); while( (c = getch()) != ESC && (c < '1' || c > '4')) putch('\a'); return c; } /* ---------------------------------- */ int print_adr_book(void) //display adressbook { int line = 1; ELEMENT *p = hol.first; system("cls"); set_cur(0,20); puts(pgmname); set_cur(2,0); puts(headline); set_cur(5,0); while(p != NULL) //run through list and show entries { printf("%5d %-15s ",line, p->person.family_name); printf("%-12s %-15s ", p->person.given_name, p->person.street); printf("%-4d %-5d %-12d\n",p->person.house_number, p->person.postal_code, p->person.phone); p = p->next; if( p == NULL || ++line %16 == 1) //end of list or screen is full { set_cur(24,0); printf("%s",further); if( getch() == ESC) return 0; set_cur(5,0); scroll_up(0,5,24);//puts(headline); } } return 0; } /* -------------------------------------------*/ int make_entry(void) { char cache[50]; DATA newperson; ELEMENT *p; while(1) { system("cls"); set_cur(0,20); puts(pgmname); set_cur(6,0); puts("Please enter new data:"); set_cur(10,0); puts(prompt); set_cur(24,0); printf("%s",buttons); balken(10, 25, MAXL, ' ',0x70); //input name if(input(newperson.family_name, MAXL, ESC, CR) == ESC) return 0; balken(12,25, MAXL, ' ', 0x70); //surname if(input(newperson.given_name, MAXL, ESC, CR) == ESC) return 0; balken(14,25, 30, ' ', 0x70); //street if(input(newperson.street, 30, ESC, CR) == ESC) return 0; balken(16,25, 4, ' ',0x70); //housenumber if(input(cache, 4, ESC, CR) == ESC) return 0; newperson.house_number = atol(cache); //to string balken(18,25, 5, ' ',0x70); //postal code if(input(cache, 5, ESC, CR) == ESC) return 0; newperson.postal_code = atol(cache); //to string balken(20,25, 20, ' ',0x70); //phone number if(input(cache, 20, ESC, CR) == ESC) return 0; newperson.phone = atol(cache); //to string p = search(newperson.phone); if( p!= NULL && p->person.phone == newperson.phone) { set_cur(22,25); puts("phonenumber already exists!"); set_cur(24,0); printf("%s, further"); getch(); continue; } } } 5th /* adress_book_project.c : main program to create an adressbook */ /* copyrights by Oussama Sabri, June 2010 */ #include "adressbook.h" //project header file int main() { int rv, cmd; //return value, user command if ( (rv = read_file() ) == -1) // no data saved yet rv = make_entry(); check(rv); //prompts an error and quits program on disfunction do { switch (cmd = menu())//calls menu and gets user input back { case '1': rv = make_entry(); break; case '2': //delete entry case '3': //changes entry rv = change_entry(cmd); break; case '4': //prints adressbook on screen rv = print_adr_book(); break; case ESC: //end of program system ("cls"); rv = 0; break; } }while(cmd!= ESC); check ( write_file() ); //save adressbook return 0; } 6th /* Getcb.c --> Die Funktion getcb() liefert die naechste * * Tastatureingabe (ruft den BIOS-INT 0x16 auf). * * Return-Wert: * * ASCII-Code bzw. erweiterter Code + 256 */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> int getcb(void) { union REGS intregs; intregs.h.ah = 0; // Subfunktion 0: ein Zeichen // von der Tastatur lesen. int86( 0x16, &intregs, &intregs); if( intregs.h.al != 0) // Falls ASCII-Zeichen, return (intregs.h.al); // dieses zurueckgeben. else // Sonst den erweiterten return (intregs.h.ah + 0x100); // Code + 256 } 7th /* PUTCB.C --> enthaelt die Funktionen * * - putcb() * * - putcb9() * * - balken() * * - input() * * * * Es werden die Funktionen 9 und 14 des Video-Interrupts * * (ROM-BIOS-Interrupt 0x10) verwendet. * * * * Die Prototypen dieser Funktionen stehen in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #define VIDEO_INT 0x10 /*---------------------------------------------------------------- * putcb(c) gibt das Zeichen auf der aktuellen Cursor-Position * am Bildschirm aus. Der Cursor wird versetzt. * Steuerzeichen Back-Space, CR, LF und BELL werden * ausgefuehrt. * Return-Wert: keiner */ void putcb(unsigned char c) /* Gibt das Zeichen in c auf */ { /* den Bildschirm aus. */ union REGS intregs; intregs.h.ah = 14; /* Subfunktion 14 ("Teletype") */ intregs.h.al = c; intregs.h.bl = 0xf; /* Vordergrund-Farbe im */ /* Grafik-Modus. */ int86(VIDEO_INT, &intregs, &intregs); } /*---------------------------------------------------------------- * putcb9(c,count,mode) gibt das Zeichen in c count-mal im * angegebenen Modus auf der aktuellen * Cursor-Position am Bildschirm aus. * Der Cursor wird nicht versetzt. * * Return-Wert: keiner */ void putcb9( unsigned char c, /* das Zeichen */ unsigned count, /* die Anzahl */ unsigned mode ) /* Low-Byte: das Atrribut */ { /* High-Byte: die Bildschirmseite*/ union REGS intregs; intregs.h.ah = 9; /* Subfunktion 9 des Int 0x10 */ intregs.h.al = c; intregs.x.bx = mode; intregs.x.cx = count; int86( VIDEO_INT, &intregs, &intregs); } /*---------------------------------------------------------------- * balken() positioniert den Cursor und zeichnet einen Balken, * wobei Position, L„nge, Fllzeichen und Attribut * als Argumente bergeben werden. * Der Cursor bleibt auf der ersten Position im Balken. */ void balken( unsigned int zeile, /* Start-Position */ unsigned int spalte, unsigned int laenge, /* Laenge des Balkens */ unsigned char c, /* Fuellzeichen */ unsigned int modus) /* Low-Byte: Attribut */ /* High-Byte: Bildschirmseite */ { union REGS intregs; intregs.h.ah = 2; /* Cursor auf der angegebenen */ intregs.h.dh = zeile; /* Bildschirmseite versetzen. */ intregs.h.dl = spalte; intregs.h.bh = (modus >> 8); int86(VIDEO_INT, &intregs, &intregs); putcb9(c, laenge, modus); /* Balken ausgeben. */ } /*---------------------------------------------------------------- * input() liest Zeichen von der Tastatur ein und haengt '\0' an. * Mit Backspace kann die Eingabe geloescht werden. * Das Attribut am Bildschirm bleibt erhalten. * * Argumente: 1. Zeiger auf den Eingabepuffer. * 2. Anzahl maximal einzulesender Zeichen. * 3. Die optionalen Argumente: Zeichen, mit denen die * Eingabe abgebrochen werden kann. * Diese Liste muá mit CR = '\r' enden! * Return-Wert: Das Zeichen, mit dem die Eingabe abgebrochen wurde. */ #include <stdarg.h> int getcb( void); /* Zum Lesen der Tastatur */ int input(char *puffer, int max,... ) { int c; /* aktuelles Zeichen */ int breakc; /* Abruchzeichen */ int nc = 0; /* Anzahl eingelesener Zeichen */ va_list argp; /* Zeiger auf die weiteren Arumente */ while(1) { *puffer = '\0'; va_start(argp, max); /* argp initialisieren */ c = getcb(); do /* Mit Zeichen der Abbruchliste vergleichen */ if(c == (breakc = va_arg(argp,int)) ) return(breakc); while( breakc != '\r' ); va_end( argp); if( c == '\b' && nc > 0) /* Backspace? */ { --nc; --puffer; putcb(c); putcb(' '); putcb(c); } else if( c >= 32 && c <= 255 && nc < max ) { ++nc; *puffer++ = c; putcb(c); } else if( nc == max) putcb('\7'); /* Ton ausgeben */ } } 8th /* Video.c --> Enthaelt die Funktionen * cls(), * scroll_up(), scroll_down(), * set_cur(), get_cur(), * set_screen_page(), get_screen_page() * * Die Prototypen dieser Funktionen befinden sich in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #include "bio.h" #define VIDEO_INT 0x10 typedef unsigned char BYTE; void scroll_up( int anzahl, int anf_zeile, int end_zeile) { /* Fenster hoch rollen. */ union REGS intregs; intregs.x.ax = 0x600 + anzahl; /* Subfunktion AH = 6, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void scroll_down( int anzahl, int anf_zeile, int end_zeile) { /* Fenster runter rollen. */ union REGS intregs; intregs.x.ax = 0x700 + anzahl; /* Subfunktion AH = 7, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void set_cur( int zeile, int spalte) /* versetzt den Cursor */ { /* der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 2; intregs.h.dh = (BYTE)zeile; intregs.h.dl = (BYTE)spalte; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); } void get_cur(int *zeile, int *spalte) /* holt die Cursor- */ { /* Position der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 3; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); *zeile = (unsigned)intregs.h.dh; *spalte = (unsigned)intregs.h.dl; } void cls(void) { scroll_up(0,0,24); /* Gesamten Bildschirm loeschen. */ set_cur(0,0); /* Cursor in Home-Position. */ } int get_screen_page(void) /* Aktuelle Bildschirmseite holen.*/ { union REGS intregs; intregs.h.ah = 15; /* Subfunktion AH = 15: */ /* Bildschirm-Modus feststellen. */ int86(VIDEO_INT, &intregs, &intregs); return (intregs.h.bh); } void set_screen_page(int seite) /* setzt die aktive Seite des */ { /* Bildschirmpuffers auf die */ /* angegebene Seite. */ union REGS intregs; intregs.x.ax = 0x500 + seite; /* Subfunktion AH = 5 */ int86(VIDEO_INT, &intregs, &intregs); } /* ------------------------------------------------------------- Ein kleines Testprogramm : */ /* #include <stdio.h> int main() { cls(); set_cur(23, 0); printf("Weiter mit <Return>\n"); set_cur(12, 20); printf("Ein Test!\n"); getchar(); scroll_up(3, 5, 20); getchar(); scroll_down(6, 5, 20); getchar(); set_screen_page(1); printf("\nAuf der 2. Seite !\n"); getchar(); set_screen_page(0); set_cur(0,0); printf("\nWieder auf der 1. Seite !\n"); getchar(); cls(); return 0; } */ /* Video.c --> Enthaelt die Funktionen * cls(), * scroll_up(), scroll_down(), * set_cur(), get_cur(), * set_screen_page(), get_screen_page() * * Die Prototypen dieser Funktionen befinden sich in BIO.H */ /* Hinweis: Es muss ein DOS-Compiler verwendet werden. * * (z.B. der GNU-Compiler fuer DOS auf der CD) */ #include <dos.h> #include "bio.h" #define VIDEO_INT 0x10 typedef unsigned char BYTE; void scroll_up( int anzahl, int anf_zeile, int end_zeile) { /* Fenster hoch rollen. */ union REGS intregs; intregs.x.ax = 0x600 + anzahl; /* Subfunktion AH = 6, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void scroll_down( int anzahl, int anf_zeile, int end_zeile) { /* Fenster runter rollen. */ union REGS intregs; intregs.x.ax = 0x700 + anzahl; /* Subfunktion AH = 7, */ /* AL = Anzahl Zeilen. */ intregs.x.cx = anf_zeile << 8; /* CH=anf_zeile, cl=0 */ intregs.x.dx = (end_zeile <<8) | 79; /* DH=end_zeile,DL=79 */ intregs.h.bh = 7; /* normales Attribut */ int86(VIDEO_INT, &intregs, &intregs); } void set_cur( int zeile, int spalte) /* versetzt den Cursor */ { /* der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 2; intregs.h.dh = (BYTE)zeile; intregs.h.dl = (BYTE)spalte; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); } void get_cur(int *zeile, int *spalte) /* holt die Cursor- */ { /* Position der aktuellen Bildschirmseite.*/ union REGS intregs; intregs.h.ah = 3; intregs.h.bh = (BYTE)get_screen_page(); int86(VIDEO_INT, &intregs, &intregs); *zeile = (unsigned)intregs.h.dh; *spalte = (unsigned)intregs.h.dl; } void cls(void) { scroll_up(0,0,24); /* Gesamten Bildschirm loeschen. */ set_cur(0,0); /* Cursor in Home-Position. */ } int get_screen_page(void) /* Aktuelle Bildschirmseite holen.*/ { union REGS intregs; intregs.h.ah = 15; /* Subfunktion AH = 15: */ /* Bildschirm-Modus feststellen. */ int86(VIDEO_INT, &intregs, &intregs); return (intregs.h.bh); } void set_screen_page(int seite) /* setzt die aktive Seite des */ { /* Bildschirmpuffers auf die */ /* angegebene Seite. */ union REGS intregs; intregs.x.ax = 0x500 + seite; /* Subfunktion AH = 5 */ int86(VIDEO_INT, &intregs, &intregs); } /* ------------------------------------------------------------- Ein kleines Testprogramm : */ /* #include <stdio.h> int main() { cls(); set_cur(23, 0); printf("Weiter mit <Return>\n"); set_cur(12, 20); printf("Ein Test!\n"); getchar(); scroll_up(3, 5, 20); getchar(); scroll_down(6, 5, 20); getchar(); set_screen_page(1); printf("\nAuf der 2. Seite !\n"); getchar(); set_screen_page(0); set_cur(0,0); printf("\nWieder auf der 1. Seite !\n"); getchar(); cls(); return 0; } */ /* BIO.H --> Enthaelt die Prototypen der BIOS-Funktionen. */ /* --- Funktionen in VIDEO.C --- */ extern void scroll_up(int anzahl, int anf_zeile,int end_zeile); extern void scroll_down(int anzahl, int anf_zeile, int end_zeile); extern void set_cur(int zeile, int spalte); extern void get_cur(int *zeile, int *spalte); extern void cls(void); extern int get_screen_page(void); extern void set_screen_page(int page); /* --- Funktionen in GETCB.C / PUTCB.C --- */ extern int getcb(void); extern void putcb(int c); extern void putcb9(int c, unsigned count, unsigned modus); extern void balken(int zeile, int spalte, int laenge, int c, unsigned modus); extern int input(char *puffer, int max,... ); need your help, can't find my mistakes:((

Read the article

Questions about TinyMCE. Or suggestions on a compariable product.

- by chobo2

Hi I am using jquery 1.3.2 and asp.net mvc 1.0. Originally I was using some other rich html editor but I ran into one major problem when a user pasted in text from open office or MS office it would bring along tons of styling junk. If a user like wrote one sentence what was like 25 characters and pasted that into my current html editor the count would 25,000 characters and I don't want to store all that junk( I can't afford to). So tinyMCE seems to not have this problem. However I got some questions. It seems if you want to use for commercial use(what my site is but currently is not making very much at this time) you need to get a commercial license. However it does not say if it is free or if it will cost money. I am assuming it means that you will have to pay but I would like to confirm this. So do you have to pay for a license to use tinyMCe if your using it for commercial use? (Yes/ No) ------------------ Answer the following questions if you said "no" to the first question ----------- So would I use the jQuery package then or is it better to use the other versions? What is this .net compressor zip for? Do I need it? I only want a few of the buttons(like bold,font size) can I remove the other buttons? It seems to display a word count. Can it be changed to character count? ----------------- Answer the following question if you said "yes" to the first question -------- Is there a rich html editor that is free for commercial use and preferably for jquery that can remove the junk that office programs seem to bring along? This is a test to show how much formatting gets made. • One • Two • Three The above text when copied into my current rich html editor will have all this code with it. <meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="ProgId" content="Word.Document"><meta name="Generator" content="Microsoft Word 12"><meta name="Originator" content="Microsoft Word 12"><link rel="File-List" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_filelist.xml"><link rel="themeData" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_themedata.thmx"><link rel="colorSchemeMapping" href="file:///C:%5CUsers%5Cchobo2%5CAppData%5CLocal%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_colorschememapping.xml"><style>  </style> <p class="MsoNormal">This is a test to show <b style="">how</b> much formatting gets made.</p> <p class="MsoListParagraphCxSpFirst" style="text-indent: -0.25in;"><span style="font-family: Symbol;"><span style="">·<span style="font: 7pt "Times New Roman";">         </span></span></span>One</p> <p class="MsoListParagraphCxSpMiddle" style="text-indent: -0.25in;"><span style="font-family: Symbol;"><span style="">·<span style="font: 7pt "Times New Roman";">         </span></span></span>Two</p> <p class="MsoListParagraphCxSpMiddle" style="text-indent: -0.25in;"><span style="font-family: Symbol;"><span style="">·<span style="font: 7pt "Times New Roman";">         </span></span></span>Three</p> <p class="MsoListParagraphCxSpLast"><o:p> </o:p></p>

Search Results

Search found 5148 results on 206 pages for 'preconference programs'.

Page 206/206 | < Previous Page | 202 203 204 205 206

- by Aristos

- by Frank

- by FastAl

- by FastAl

- by Petrus

- by Ralf Westphal

- by BuckWoody

- by john.rose

- by dtbarne

- by Alan Smith

- by José

- by nunos

- by goodwill

- by Josh

- by Margus

- by mekasperasky

- by PolishHurricane

- by DomainSoil

- by Gerard Flynn

- by Liu Maclean(???)

- by Sean Duggan

- by osabri

- by chobo2

< Previous Page | 202 203 204 205 206