Search Results

Search found 22449 results on 898 pages for 'complete pc backup'.

Page 207/898 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • Windows Server 2003 (w/Exchange) move to new machine

    - by James Booker
    I have an ageing domain controller (the only one on a 10-pc network) which needs rebooting often. I have a Dell Poweredge 2850 server doing nothing, so I'd like to move the DC to that, but here's the catch - I don't have Win2k Server Std install media any more as it's been lost. I purchased "Easus Todo Backup Advanced Server" which claims to be able to recover to dissimilar metal, but it's not quite working (although I don't think it's the product's fault) I know the server and PERC RAID card are good because I installed Ubuntu on the logical drive (4 x 72GB disks RAID 5) no problems. I've booted frmo the Easus Todo backup CD (which is WinPE based) and recovered to the logical disk on the RAID (after installing driver inside the WinPE environment from a NAS drive) The problem is when I boot the server, I can get the OS selection menu, but any option results in a blank screen, with no errors. I figure this is probably because the driver wasn't installed on the old machine (which is IDE-based (i know, i know!) and doesn;t have a RAID controller) I've booted from the CD and copied the mraid35x.sys file to the c:\windows\system32\drivers folder on the recovered system, but it makes no difference. I made a boot.ini with rdisks 0-10 defined, and booting from each of these resulted in a file error (i.e. 'this isn't a real disk') - the only disk that gets any response (the blank screen) is multi(0)disk(0)rdisk(0)partition(1) which just gives me the blank black screen and no disk activity. Is there any way I can force the drvier to be installed on the source system (so i can do a full backup again), i've tried right-clicking the oemsetup.inf and clicking install, but it didn't actually do anything. I attempted to force it with the 'Add new hardware' wizard and forcing with the 'have disk' option but it still gave me no hardware to select. Also I've got an identical machine running WinXP which uses the PERC driver successfully (which was obviously done at install time) and the boot.ini settings are the same : multi(0)disk(0)rdisk(0)partition(1) Any ideas would be appreciated.

    Read the article

  • Diff bios - corrupt video driver

    - by sfonck
    Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

    Read the article

  • Accessing or Resetting Permissions of a Mounted Registry Hive of a Different User / From a Different System

    - by Synetech
    I’m currently stuck using my backup system until I can replace my dead motherboard. In the meantime, I have put my hard-drive in this system so that I can access my files and keep working on the backup system. Fortunately, I don’t have a permission issues with the files (the partitions are FAT32). The issue I’m having is with the registry. I need to import some of my settings from the hives of my (old? normal?) installation of Windows into the one I’m currently using. Settings from the system hives (SYSTEM, SOFTWARE, etc.) are fine, but the user hive is giving me trouble. I’ve copied the NTUSER.DAT file from my other drive and mounted it with the reg command. Most of the keys (eg Software) are fine and I can access them without problem, but some of them (particularly the Identities key where Outlook Express settings are stored) complains that it cannot be opened. If I open the permissions dialog, I get an error about being unable to view the current permssions. If I then ignore it and try to take ownership of the key and it’s subkeys, I get an access-denied error. If I then add permissions for my user account on this system, I get an error, however I am then able to see the subkeys and values of the key. If I then try to access the subkeys, I get the same original errors. If I repeat the process for each subkey, I can see their values and subkeys, and so on, but of course this gets to be incredibly annoying and time-consuming (especially since the Identities key has a lot of subkeys). Is there an easier/temporary/more correct way to dump a key so that I can import it into my backup system?

    Read the article

  • Shrink Windows OS partition with unmovable files

    - by Tim
    I am trying to shink Windows 7 OS partition C: but cannot shrink as much as I plan due to unmovable files. I have tried Windows own defrag tool before but it does not move files that are unmovable. Here are some ideas I have learned from previous posts, and I hope at least one of them will work and wish to know the detail how to do: Inspired by this post, which suggests backup C:, then delete C: , create a smaller partition, and then copy the backup to the smaller partition. I was wondering if anyone here can confirm that Windows 7 will still work in this way? What reliable tools can be used for backuping the system, and deleting and creating partition, and then copying back the backup in this method? I am actually trying another way suggested in this post. I have identified what unmovable file currently stop further shrinking: \ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010015.wid::$DATA If I understand correctly, the file belongs to Windows Search. Can I set up somewhere in Windows system settings to temperately eliminate the file and similar ones (because there are many similar files under the same directory which I guess will also stand in the way of shrinking and unmovable by defrag)? Any other idea that might work will also be appreciated. Thanks and regards!

    Read the article

  • Recover deleted folder form bookmarks bar?

    - by OverTheRainbow
    I googled for this, but didn't find an answer. I removed a folder in Google Chrome's Bookmarks bar. Chrome says nothing when doing this, and I assumed it wouldn't actually delete the data from the Bookmarks manager, just the folder in the Bookmarks bar. Turns out I was wrong, and now I lost hundred's of URLs. I closed and restarted Chrome since then, so data is apparently no longer on disk. Since Google Sync is on by default, it says I have "536 bookmarks", I installed Chrome on another computer, logged on to Google... but the folder is still gone. I can't believe Chrome doesn't prompt the user with an obvious message for something that important. Is there somehow a way to recover a folder removed from the Bookmarks bar? Thank you. Edit: Amazingly, Chrome doesn't 1) provide a way to remove an item from the Bookmarks bar without also deleting it from the Bookmarks list, and 2) doesn't even warn the user of the consequences when doing so! The only way to recover data is: if you haven't closed the browser yet, make a backup of the Bookmarks file, close the browser, replace the now-leaner Bookmarks file with the previous version, and restart Chrome if you have closed it, recover the file from your backup. You did backup that file, right? ;-)

    Read the article

  • Nginx as reverse proxy: how to properly configure gateway timeout?

    - by user1281376
    We have configured Nginx as a reverse proxy to an Apache server farm, but I'm running into trouble with the gateway timeouts. Our Goal in human readable form is: "Deliver a request within one second, but if it really takes longer, deliver anyway", which for me translates into "Try the first Apache server in upstream for max 500ms. If we get a timeout / an error, try the next one and so on until we finally succeed." Now our relevant configuration is this: location @proxy { proxy_pass http://apache$request_uri; proxy_connect_timeout 1s; proxy_read_timeout 2s; } [...] upstream apache { server 127.0.0.1:8001 max_fails=1 fail_timeout=10s; server 10.1.x.x:8001 max_fails=1 fail_timeout=10s backup; server 10.1.x.x:8001 max_fails=1 fail_timeout=10s backup; server 10.1.x.x:8001 max_fails=1 fail_timeout=10s backup; } The problem here is that nginx seems to misunderstand this as "Try to get a response from the whole upstream cluster within one second and deliver a 50X error if we don't - without any limit on how long to try any upstream server", which is obviously not what we had in mind. Is there any way to get nginx to do what we want?

    Read the article

  • How to read Unicode characters from command-line arguments in Python on Windows

    - by Craig McQueen
    I want my Python script to be able to read Unicode command line arguments in Windows. But it appears that sys.argv is a string encoded in some local encoding, rather than Unicode. How can I read the command line in full Unicode? Example code: argv.py import sys first_arg = sys.argv[1] print first_arg print type(first_arg) print first_arg.encode("hex") print open(first_arg) On my PC set up for Japanese code page, I get: C:\temp>argv.py "PC·??????08.09.24.doc" PC·??????08.09.24.doc <type 'str'> 50438145835c83748367905c90bf8f9130382e30392e32342e646f63 <open file 'PC·??????08.09.24.doc', mode 'r' at 0x00917D90> That's Shift-JIS encoded I believe, and it "works" for that filename. But it breaks for filenames with characters that aren't in the Shift-JIS character set—the final "open" call fails: C:\temp>argv.py Jörgen.txt Jorgen.txt <type 'str'> 4a6f7267656e2e747874 Traceback (most recent call last): File "C:\temp\argv.py", line 7, in <module> print open(first_arg) IOError: [Errno 2] No such file or directory: 'Jorgen.txt' Note—I'm talking about Python 2.x, not Python 3.0. I've found that Python 3.0 gives sys.argv as proper Unicode. But it's a bit early yet to transition to Python 3.0 (due to lack of 3rd party library support). Update: A few answers have said I should decode according to whatever the sys.argv is encoded in. The problem with that is that it's not full Unicode, so some characters are not representable. Here's the use case that gives me grief: I have enabled drag-and-drop of files onto .py files in Windows Explorer. I have file names with all sorts of characters, including some not in the system default code page. My Python script doesn't get the right Unicode filenames passed to it via sys.argv in all cases, when the characters aren't representable in the current code page encoding. There is certainly some Windows API to read the command line with full Unicode (and Python 3.0 does it). I assume the Python 2.x interpreter is not using it.

    Read the article

  • Configuring zend to use gmail smtp: Windows Apache dev-environment: "Could not open socket" error - repeatedly - going mad

    - by confused
    My dev environment is Win XP SP2 / Apache 2.something PHP 5.something_or_other My prod env is Linux Ubuntu / Apache 2.something_else PHP 5.something_or_other_else The code is all Zend Framework Version: 1.11.1 I can telnet to: smtp.gmail.com 465 from the PC. I have Mercury configured on my PC to use gmail as it's smtp host and it works just fine. (MercuryC SMTP Client). Mercury is set to use port 465 and SSL on smtp.gmail.com -- No problem. Zend mail works just fine on my production environment using the production mail server to send out mail. It's the same basic application.ini but with different values in the mail variables. On my local PC dev setup, my application.ini contains: (same values as I use in Mercury) mail.templatePath = APPLICATION_PATH "/emails" mail.sender.name = "myAccount" mail.sender.email = "[email protected]" mail.host = smtp.gmail.com mail.smtp.auth = "login" mail.smtp.username = "[email protected]" mail.smtp.password = "myPassWord" mail.smtp.ssl = "ssl" mail.smtp.port = 465 I have been doing trial and error for hours trying to get a single email out with no success. In every case, regardless of server or port settings it throws an error and reports: Could not open socket. Both Apache and Mercury Core are exceptions in my Windows Firewall config. Mercury seems to be having no problem. I have searched stackoverflow before posting this and have been googling for hours -- with no success. I am slowly losing my mind I would be very much obliged for any tip as to what might be wrong. Thanks for reading. =================== BTW When I use the SAME application.ini values on my local PC as on the production host, I get the same "Could not open socket" error. Those values are: mail.templatePath = APPLICATION_PATH "/emails" mail.sender.name = "otherUser" mail.sender.email = "[email protected]" mail.host = smtp.otherServer.com mail.smtp.auth = "login" mail.smtp.username = "[email protected]" mail.smtp.password = "otherPAssWord" mail.smtp.ssl = "ssl" mail.smtp.port = 465 I know these work in the production (Ubuntu) environment. I'm utterly baffled.

    Read the article

  • Rails does not display error messages on a form in a custom method

    - by slythic
    Hi all, I've created a custom method called checkout in my app. I create an order (which is done my adding products to my "cart"), assign it to my client, and then I head to my checkout screen where I confirm the items and enter their customer order number and complete the order (submit). Everything works great except that it doesn't display error messages. I'm able to display a flash error notice (seen in complete_order method) when things go wrong but it doesn't specify the details like a normal form would. The error messages should appear if the customer order number is not unique for that client. Below is the custom method (checkout) related code. Order Model: validates_uniqueness_of :customer_order_number, :scope => :client_id Orders_controller: def checkout @order = current_order end def complete_order @order = current_order respond_to do |format| if @order.update_attributes(params[:order]) @order.complete #sets submitted datetime and state to 'complete' flash[:notice] = 'Thank you! Your order is being processed.' format.html { redirect_to( products_path ) } format.xml { head :ok } else flash[:error] = 'Please review your items' #added to confirm an error is present format.html { redirect_to( checkout_path ) } format.xml { render :xml => @order.errors, :status => :unprocessable_entity } end end end And the form in the checkout view: <% form_for @order, :url => { :controller => "orders", :action => "complete_order" } do |f| %> <%= f.error_messages %> <%= f.text_field :customer_order_number, :label => "Purchase Order Number" %> <p> <%= f.submit 'Complete Order', :confirm => 'Are you sure?' %> <small> or <%= link_to 'cancel', current_cart_path %></small> </p> <% end %> Any idea how I can display the specific error messages? Thank you in advance! -Tony

    Read the article

  • Entity Framework - refresh objects from database

    - by Nebo
    I'm having trouble with refreshing objects in my database. I have an two PC's and two applications. On the first PC, there's an application which communicates with my database and adds some data to Measurements table. On my other PC, there's an application which retrives the latest Measurement under a timer, so it should retrive measurements added by the application on my first PC too. The problem is it doesn't. On my application start, it caches all the data from database and never get new data added. I use Refresh() method which works well when I change any of the cached data, but it doesn't refresh newly added data. Here is my method which should update the data: public static Entities myEntities = new Entities(); public static Measurement GetLastMeasurement(int conditionId) { myEntities.Refresh(RefreshMode.StoreWins, myEntities.Measurements); return (from measurement in myEntities.Measurements where measurement.ConditionId == conditionId select measurement).OrderByDescending(cd => cd.Timestamp).First(); } P.S. Applications have different connection strings in app.config (different accounts for the same DB).

    Read the article

  • Git submodules not updating?

    - by DavidYell
    I have a project in which I've included some libraries as submodules. They work fine on the machine that you add them on, but when I get home and checkout the repo, I get the folders for the submodules but they are empty. .gitmodules Neon@Neon-PC /cygdrive/c/xampp/htdocs/learning-lithium $ cat .gitmodules [submodule "libraries/lithium"] path = libraries/lithium url = git://github.com/UnionOfRAD/lithium.git [submodule "app/webroot/css/elements"] path = app/webroot/css/elements url = https://github.com/dmitryf/elements.git [submodule "app/libraries/li3_markdown"] path = app/libraries/li3_markdown url = https://github.com/sandelius/li3_markdown.git [submodule "app/webroot/markitup"] path = app/webroot/markitup url = https://github.com/markitup/1.x.git Config and status commands Neon@Neon-PC /cygdrive/c/xampp/htdocs/learning-lithium $ git submodule -af14f48b419310935446176290e1f9dc641400e0 app/libraries/li3_markdown -ebdcd8ca09c874f5e2ef81ec198cc441f37a4f74 app/webroot/css/elements -328291e49a3c7e1fb76b3342f112734864836205 app/webroot/markitup -4980010526d05c556c496ff63951da31828c5943 libraries/lithium Neon@Neon-PC /cygdrive/c/xampp/htdocs/learning-lithium $ git submodule update Neon@Neon-PC /cygdrive/c/xampp/htdocs/learning-lithium $ git submodule status -af14f48b419310935446176290e1f9dc641400e0 app/libraries/li3_markdown -ebdcd8ca09c874f5e2ef81ec198cc441f37a4f74 app/webroot/css/elements -328291e49a3c7e1fb76b3342f112734864836205 app/webroot/markitup -4980010526d05c556c496ff63951da31828c5943 libraries/lithium I added these as you would normally with, git submodule add <repo> <path> git submodule init The submodules are hosted on Github and my repo is hosted on Bitbucket, although I'm not sure if this is relevant.

    Read the article

  • django-social-auth for Facebook is redirecting home and not logging in

    - by Scott Rogowski
    I have had django-social-auth working for Google for quite some time now but am having problems with Facebook. I am at the point where clicking on the /login/facebook/ link will take me to the Facebook authorization page. I then click "go to app" and it redirects me to my home page but does not log in or create a user but does put some strange "#=" onto the back of my URL. Reading up on that, here https://developers.facebook.com/blog/post/552/, and here https://github.com/omab/django-social-auth/issues/199, it seems that would be happening if the redirect uri was not defined. However, on my facebook app settings, I have the following (replacing my site with example.com): + App Namespace: "example" + Site URL: "http://example.com/complete/facebook/" + Site Domain: "example.com" + Sandbox Mode: "On" + Post-Authorize Redirect URL: "http://apps.facebook.com/example/" + Deauthorize URL: "http://www.example.com/" + Post-Authorize URL: "http://example.com/complete/facebook/" The request that django-social-auth is sending to facebook is (replacing my info again): "https://www.facebook.com/dialog/oauth?scope=email&state=*&redirect_uri=http%3A%2F%2Fexample.com%2Fcomplete%2Ffacebook%2F%3Fredirect_state%3D***&client_id=*" The /complete/facebook/ is what is in the documentation and google works as /complete/google/ What am I missing here?

    Read the article

  • Android, phone call audio stream via wlan

    - by moppel
    I am planning on developing my specific voip app for android. Here's the scenario: when a phone call occurs I want to hear the person who's calling on my local pc speakers and I want to speak to him via my own pc microphone / headset. So I need to send the audio stream of both me and the person I am talking to via the wlan network. Something like this: ... onCallStateChanged(int state, String phoneNumber){ while(state == PhoneListener.CALL_STATE_OFFHOOK){ //while phone call is happaning //send incoming speech via wlan to pc //receive audiostream from pc microphone and direct it to the phone call } } ... Is this possible with the current Android API? (Actually it should be since voip apps are available in the market) I did some research in the Android API and all I found was the AudioManager which has constant named public static final int STREAM_VOICE_CALL; //The audio stream for phone calls But I don't know how to use it our how it should give me access to the actual audiostreams which I can send via network. How do I manage to do this? The connection would be realised by TCP sockets.

    Read the article

  • jQuery sliding animation not working

    - by Jake Zeitz
    I have three divs stacked on each other but offset so that a part of each div is visible. When one of the bottom divs is clicked I want the top div to animate out and back into the stack at the bottom, then the div that is clicked will appear at the top. So far I only have the code for when the middle div is clicked, but I cannot get it to work properly. What am I doing wrong? (I also realize that the code I wrote is probably terrible, this is the first jQuery code I have written.) The css is very very simple: .first { z-index: 3; } .second { z-index: 2; } .third { z-index: 1; } The basic html is this: <div class="first"></div> <div class="second"></div> <div class="third"></div> Here is my code: $("div.second").click(function () { $("div.first").animate({ left: "-=200px"}, {duration: "fast", complete: function () { $("div.first").removeClass("first").addClass("third").animate({left: "+=350px", top: "+=60px"}, "fast"); } }); $("div.second").animate({ left: "-=24px", top: "-=30px"}, {duration: "fast", complete: function () { $("div.second").removeClass("second").addClass("first"); } }); $("div.third").animate({ left: "-=24px", top: "-=30px"}, {duration: "fast", complete: function () { $("div.third").removeClass("third").addClass("second"); } }); }); I can get the div.first to move to the side and back. But now I can't get the classes to stay changed. What keeps happening is the div.second will remove it's class and add .first in the animation, but when the animation is complete, it acts like it still has a class of .second.

    Read the article

  • Negative number representation across multiple architechture

    - by Donotalo
    I'm working with OKI 431 micro controller. It can communicate with PC with appropriate software installed. An EEPROM is connected in the I2C bus of the micro which works as permanent memory. The PC software can read from and write to this EEPROM. Consider two numbers, B and C, each is two byte integer. B is known to both the PC software and the micro and is a constant. C will be a number so close to B such that B-C will fit in a signed 8 bit integer. After some testing, appropriate value for C will be determined by PC and will be stored into the EEPROM of the micro for later use. Now the micro can store C in two ways: The micro can store whole two byte representing C The micro can store B-C as one byte signed integer, and can later derive C from B and B-C I think that two's complement representation of negative number is now universally accepted by hardware manufacturers. Still I personally don't like negative numbers to be stored in a storage medium which will be accessed by two different architectures because negative number can be represented in different ways. For you information, 431 also uses two's complement. Should I get rid of the headache that negative number can be represented in different ways and accept the one byte solution as my other team member suggested? Or should I stick to the decision of the two byte solution because I don't need to deal with negative numbers? Which one would you prefer and why?

    Read the article

  • Using the AutoComplete feature of ComboBox, while limiting values to those in the list?

    - by Schmuli
    In WinForms 2.0, a ComboBox has an Auto-Complete feature, that displays a custom Drop-Down list with only the values that start with the entered text. However, if I want to limit valid values to only those that appear in the ComboBox's list of items, I can do that by setting the DropDownStyle to DropDownList, which stops the user from entering a value. However, now I can't use the Auto-Complete feature, which requires user input. Is there another way to limit input to the list, while still allowing use of the Auto-Complete feature? Note that I have seen some custom solutions for this, but I really like the way the matching Auto-Complete items are displayed in a Drop-Down list, and sorted even though the original list may not be. EDIT: I have thought about just validating the entered value, i.e. testing user input if it is valid in, say, the TextChanged event, or even using the Validating event. The question then is what is the expected behavior? Do I clear their value (an empty value is also invalid), or do I use a default value? Closest matching value? P.s. Is there any other tags that I could add to this question?

    Read the article

  • Boost shared_ptr use_count function

    - by photo_tom
    My application problem is the following - I have a large structure foo. Because these are large and for memory management reasons, we do not wish to delete them when processing on the data is complete. We are storing them in std::vector<boost::shared_ptr<foo>>. My question is related to knowing when all processing is complete. First decision is that we do not want any of the other application code to mark a complete flag in the structure because there are multiple execution paths in the program and we cannot predict which one is the last. So in our implementation, once processing is complete, we delete all copies of boost::shared_ptr<foo>> except for the one in the vector. This will drop the reference counter in the shared_ptr to 1. Is it practical to use shared_ptr.use_count() to see if it is equal to 1 to know when all other parts of my app are done with the data. One additional reason I'm asking the question is that the boost documentation on the shared pointer shared_ptr recommends not using "use_count" for production code.

    Read the article

  • sql to linq translated code

    - by ognjenb
    SQL: SELECT o.Id, o.OrderNumber, o.Date, d.Name AS 'Distributor', d.Notes AS 'DistrNotes', -- distributer c.Name AS 'Custoer', c.Notes AS 'CustmNotes', -- customer t.Name AS 'Transporter', -- transporter o.InvoiceFile, o.Notes, o.AwbFile, o.TrackingFile, o.Status, o.DeliveryNotification, o.ServiceType, o.ValidityDate, o.DeliveryTime, o.Weight, o.CustomerId, o.CustomerOrderNumber, o.CustomerDate, o.Shipment, o.Payment, o.TransporterId, o.TotalPrice, o.Discount, o.AlreadyPaid, o.Delivered, o.Received, o.OrderEnteredBy, CONCAT(e.Name, ' ', e.Surname) AS 'IBEKO Engineer', o.Confirmed FROM `order` o LEFT JOIN person d ON o.`DistributorId` = d.`Id` LEFT JOIN person c ON o.`CustomerId` = c.Id LEFT JOIN Transporter t ON o.`TransporterId` = t.Id LEFT JOIN IbekoEngineer e ON o.OrderEnteredBy = e.Id LINQ: testEntities6 ordersEntities = new testEntities6(); var orders_query = (from o in ordersEntities.order join pd in ordersEntities.person on o.DistributorId equals pd.Id join pc in ordersEntities.person on o.CustomerId equals pc.Id join t in ordersEntities.transporter on o.TransporterId equals t.Id select new OrdersModel { Id = o.Id, OrderNumber = o.OrderNumber, Date = o.Date, Distributor_Name = pdk.Name, Distributor_Notes = pdk.Notes, Customer_Name = pc.Name, Customer_Notes = pc.Notes, Transporter_Name = t.Name, InvoiceFile = o.InvoiceFile, Notes = o.Notes, AwbFile = o.AwbFile, TrackingFile = o.TrackingFile, Status = o.Status, DeliveryNotification = o.DeliveryNotification, ServiceType = o.ServiceType, ValidityDate = o.ValidityDate, DeliveryTime = o.DeliveryTime, Weight = o.Weight, CustomerId = o.CustomerId, CustomerOrderNumber = o.CustomerOrderNumber, CustomerDate = o.CustomerDate, Shipment = o.Shipment, Payment = o.Payment, TransporterId = o.TransporterId, TotalPrice = o.TotalPrice, Discount = o.Discount, AlreadyPaid = o.AlreadyPaid, Delivered = o.Delivered, Received = o.Received, OrderEnteredBy = o.OrderEnteredBy, Confirmed = o.Confirmed }); I translated the above SQL code into linq. SQL code return data from database but LINQ not return data. Why?

    Read the article

  • Easily use google maps, openstreet maps etc offline.

    - by samkea
    I did it and i am going to explain step by step. The explanatination may appear long but its simple if you follow. Note: All the softwares i have used are the latest and i have packaged them and provided them in the link below. I use Nokia N96 1) RootSign smartComGPS and install it on your phone(i havent provided the signer so that u wuld do some little work. i used Secman' rootsign). 2) Install Universal Maps Downloader, SmartCom OGF2 converter and OziExplorer 3.95.4s on my PC. a) UMD is used to download map tiles from any map source like googlemaps,opensourcemaps etc... and also combine the tiles into an image file like png,jpg,bmp etc... b) SmartCom OGF2 converter is used to convert the image file into a format usable on your mobile phone. c) OziExplorer will help you to calibrate the usable map file so that it can be used with GPS on your mobile phone without the use of internet. 3) Go to google maps or where u pick your maps and pan to the area of your interest. Zoom the map to at least 15 or 16 zoom level where you can see your area clearly and the streets. 4) copy this script in a notepad file and save it on your desktop: javascript:void(prompt('',gApplication.getMap().ge tCenter())); 5) Open the universal maps downloader. You will notice that you are required to add the: left longitude, right longitude,top latitude, bottom latitude. 6) On your map in google maps, doubleclick on the your prefered to most middle point. you will notice that the map will center in that area. 7) copy the script and paste it in the address bar then press enter. You will notice that a dialog with your (top latitude) and longitude respectively pops up. 8) copy the top latitude ONLY and paste it in the corresponding textbox in the UMD. 9) repeat steps 6-7 for the botton latitude. 10)repeat steps 6-7 for left longitude and right longitude too, but u have to copy the longitudes here. (***BTW record these points in the text file as they may be needed later in calibration) 11) Give the zoom level to the same zoom level that you prefered in google maps. 12) Dont forget to choose a path to save your files and under options set the proxy connection settings in UMD if you are using so. 13) Click on start and bingo! there you have your image tiles and a file with an extension .umd will be saved in the same folder. 14) On the UMD, go to tools, click on MapViewer and choose the .umd file. you will now see your map in one piece....and you will smile! 15) Still go to tools and click on map combiner. A dialog will popup for you to choose the .umd file and to enter the IMAGE file name. u can use another extension for the image file like png, jpg etc...i usually use png. 16) Combine.....bingo! there u go! u have an IMAGE file for your map. *I SUGGEST THAT CREATE A .BMP FILE and A .PNG file* 17) Close UMD and open SmartCom OGF2 converter. 18) Choose your .png image and create an ogf2 file. 19) Connect your phone to your PC in Mass Memory mode and transfer the file to the smartComGPS\Maps folder. 20) Now disconnect your phone and load smartComGPS. it will load the map and propt you to add a calibration point. Go ahead and add one calibration point with dummy coordinates. You will notice that it will add another file with extension .map in the smartComGPS\Maps folder. 21) Connect yiur ohone and copy that file and paste it in your working folder on your PC. Delete that .map file from the phone too because you are going to edit it from your PC and put it back. 22) Now Open the OziExplorer, go to file-->Load and Calibrate Map Image. 23) Choose the .bmp image and bingo! it will load with your map in the same zoom level. 24) Now you are going to calibrate. Use the MapView window and take the small box locater to all the 4 cornners of the map. You will notice that the map in the back ground moves to that area too. 25)On the right side, select the Point1 tab. Now you are in calibration mode. Now move the red box in mapview in the left upper corner to calibrate point1. 26) out of mapview go to the the left upper corner of the background map and choose poit (0,0) and your 1st calibration point. You will notice that these X,Y cordinated will be reflected in the Point1 image cordinates. 27) now go back to the text file where you saved your coordibates and enter the top latitude and the left longitude in the corresponding places. 28) Repeat steps 25-27 for point2,point3,point4 and click on save. Thats it, you have calibrated your image and you are about to finish. 29) Go to save and a dilaog which prompts you to save a .map file will poop up. Do save the map file in your working folder. 30) Right click that .map file and edit the filename in the .map file to remove the pc's directory structure. Eg. Change C\OziExplorer\data\Kampala.bmp to Kampala.ogf2. 31) Save the .map file in the smartComGPS\Maps folder on your phone. 32) now open smartComGPS on your phone and bingo! there is your map with GPS capability and in the same zoom level. 33) In smartComGPS options, choose connect and simulate. By now you should be smiling. Whoa! Hope i was of help. i case you get a problem, please inform me Below is the link to the software. regards. http://rapidshare.com/files/230296037/Utilities_Used.rar.html Ok, the Rapidshare files i posted are gone, so you will have to download as described in the solution. If you need more help, go here: http://www.dotsis.com/mobile_phone/sitemap/t-160491.html Some months later, someone else gave almost the same kind of solution here. http://www.dotsis.com/mobile_phone/sitemap/t-180123.html Note: the solutions were mean't to help view maps on Symbian phones, but i think now they ca even do for Windows Phones, iphones and others so read, extract what you want and use it. Hope it helps. Sam Kea

    Read the article

  • CI Deployment Of Azure Web Roles Using TeamCity

    - by srkirkland
    After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint.  By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly.  Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly.  Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/.  If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx).  These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly.  You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file.  Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory.  If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner.  Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward.  Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%"   Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription   function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue   if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } }   function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress"   $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" }   function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress"   # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" }   Write-Output "Create Azure Deployment" Publish   Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”.  Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values).  This should look like the following:   Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity.  You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.”  This will bring up a dialog like the one below, where you can select the last change to use for your deployment.  Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature.   Enjoy!

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Introduction to Human Workflow 11g

    - by agiovannetti
    Human Workflow is a component of SOA Suite just like BPEL, Mediator, Business Rules, etc. The Human Workflow component allows you to incorporate human intervention in a business process. You can use Human Workflow to create a business process that requires a manager to approve purchase orders greater than $10,000; or a business process that handles article reviews in which a group of reviewers need to vote/approve an article before it gets published. Human Workflow can handle the task assignment and routing as well as the generation of notifications to the participants. There are three common patterns or usages of Human Workflow: 1) Approval Scenarios: manage documents and other transactional data through approval chains . For example: approve expense report, vacation approval, hiring approval, etc. 2) Reviews by multiple users or groups: group collaboration and review of documents or proposals. For example, processing a sales quote which is subject to review by multiple people. 3) Case Management: workflows around work management or case management. For example, processing a service request. This could be routed to various people who all need to modify the task. It may also incorporate ad hoc routing which is unknown at design time. SOA 11g Human Workflow includes the following features: Assignment and routing of tasks to the correct users or groups. Deadlines, escalations, notifications, and other features required for ensuring the timely performance of a task. Presentation of tasks to end users through a variety of mechanisms, including a Worklist application. Organization, filtering, prioritization and other features required for end users to productively perform their tasks. Reports, reassignments, load balancing and other features required by supervisors and business owners to manage the performance of tasks. Human Workflow Architecture The Human Workflow component is divided into 3 modules: the service interface, the task definition and the client interface module. The Service Interface handles the interaction with BPEL and other components. The Client Interface handles the presentation of task data through clients like the Worklist application, portals and notification channels. The task definition module is in charge of managing the lifecycle of a task. Who should get the task assigned? What should happen next with the task? When must the task be completed? Should the task be escalated?, etc Stages and Participants When you create a Human Task you need to specify how the task is assigned and routed. The first step is to define the stages and participants. A stage is just a logical group. A participant can be a user, a group of users or an application role. The participants indicate the type of assignment and routing that will be performed. Stages can be sequential or in parallel. You can combine them to create any usage you require. See diagram below: Assignment and Routing There are different ways a task can be assigned and routed: Single Approver: task is assigned to a single user, group or role. For example, a vacation request is assigned to a manager. If the manager approves or rejects the request, the employee is notified with the decision. If the task is assigned to a group then once one of managers acts on it, the task is completed. Parallel : task is assigned to a set of people that must work in parallel. This is commonly used for voting. For example, a task gets approved once 50% of the participants approve it. You can also set it up to be a unanimous vote. Serial : participants must work in sequence. The most common scenario for this is management chain escalation. FYI (For Your Information) : task is assigned to participants who can view it, add comments and attachments, but can not modify or complete the task. Task Actions The following is the list of actions that can be performed on a task: Claim : if a task is assigned to a group or multiple users, then the task must be claimed first to be able to act on it. Escalate : if the participant is not able to complete a task, he/she can escalate it. The task is reassigned to his/her manager (up one level in a hierarchy). Pushback : the task is sent back to the previous assignee. Reassign :if the participant is a manager, he/she can delegate a task to his/her reports. Release : if a task is assigned to a group or multiple users, it can be released if the user who claimed the task cannot complete the task. Any of the other assignees can claim and complete the task. Request Information and Submit Information : use when the participant needs to supply more information or to request more information from the task creator or any of the previous assignees. Suspend and Resume :if a task is not relevant, it can be suspended. A suspension is indefinite. It does not expire until Resume is used to resume working on the task. Withdraw : if the creator of a task does not want to continue with it, for example, he wants to cancel a vacation request, he can withdraw the task. The business process determines what happens next. Renew : if a task is about to expire, the participant can renew it. The task expiration date is extended one week. Notifications Human Workflow provides a mechanism for sending notifications to participants to alert them of changes on a task. Notifications can be sent via email, telephone voice message, instant messaging (IM) or short message service (SMS). Notifications can be sent when the task status changes to any of the following: Assigned/renewed/delegated/reassigned/escalated Completed Error Expired Request Info Resume Suspended Added/Updated comments and/or attachments Updated Outcome Withdraw Other Actions (e.g. acquiring a task) Here is an example of an email notification: Worklist Application Oracle BPM Worklist application is the default user interface included in SOA Suite. It allows users to access and act on tasks that have been assigned to them. For example, from the Worklist application, a loan agent can review loan applications or a manager can approve employee vacation requests. Through the Worklist Application users can: Perform authorized actions on tasks, acquire and check out shared tasks, define personal to-do tasks and define subtasks. Filter tasks view based on various criteria. Work with standard work queues, such as high priority tasks, tasks due soon and so on. Work queues allow users to create a custom view to group a subset of tasks in the worklist, for example, high priority tasks, tasks due in 24 hours, expense approval tasks and more. Define custom work queues. Gain proxy access to part of another user's tasks. Define custom vacation rules and delegation rules. Enable group owners to define task dispatching rules for shared tasks. Collect a complete workflow history and audit trail. Use digital signatures for tasks. Run reports like Unattended tasks, Tasks productivity, etc. Here is a screenshoot of what the Worklist Application looks like. On the right hand side you can see the tasks that have been assigned to the user and the task's detail. References Introduction to SOA Suite 11g Human Workflow Webcast Note 1452937.2 Human Workflow Information Center Using the Human Workflow Service Component 11.1.1.6 Human Workflow Samples Human Workflow APIs Java Docs

    Read the article

  • Importing Sql Server 2005 database into Sql Server express 2008

    - by Matthew Kanwisher
    Is there any way to import a database backup from 2005 into 2008 express edition. What I've had to resort to is doing a script the database, then import all the data through DTS. Whenever I tried to import straight from a backup file it says something about not being to import into a new version of sql server or I'll get the below error. title: Microsoft SQL Server Management Studio Specified cast is not valid. (SqlManagerUI)

    Read the article

  • How can I call winrar in perl on windows

    - by perlnoob
    Is it possible to call winrar through perl on a windows system, such as perl -e "rar a -rr10 -s c:\backups\backup.rar @backup.lst" If so, is there a more efficient way to do this? I've looked up "perl -e" +winrar on google, however none of the results gave me any answer that was remotely close to what i was looking for. The system Im running this on is a Windows XP system. Im open to doing this in another language like python if its easier, however I am more comfertable with perl.

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >