Search Results

Search found 6171 results on 247 pages for 'debian installer'.

Page 207/247 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• openvpn TCP/UDP slow SSH/SMB performance

  - by Petr Latal

  I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

  Read the article

• .net Framework won't install on Server 2003 SP2 x64

  - by Yvan JANSSENS

  Hi, When I install the .net Framework 3.5 SP1 on my rental VPS, I get the message that setup has failed. It's a Server 2003 VPS w/ SP2 installed (64-bit). The .net Framework v 2.0 installed correctly. How do I fix this? This is the installation log: [03/10/10,07:44:46] Microsoft .NET Framework 2.0a x64: [2] Failed to fetch setup file in CBaseComponent::PreInstall() [03/10/10,07:44:47] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467260. [03/10/10,07:44:48] setup.exe: [2] CSetupManager::RunInstallPhase() - Call to Pre/Install/Post for InstallComponents failed [03/10/10,07:44:49] setup.exe: [2] CSetupManager::RunInstallPhaseAndCheckResults() - RunInstallPhase() returned a NULL piActionResults [03/10/10,07:44:49] setup.exe: [2] CSetupManager::RunInstallFromList() - RunInstallPhaseAndCheckResults failed [2] [03/10/10,07:44:51] setup.exe: [2] ISetupManager::RunInstallLists(IP_PREINSTALL failed in ISetupManager::RunInstallFromThread() [03/10/10,07:44:52] setup.exe: [2] ISetupManager::RunInstallFromThread() failed in ISetupManager::RunInstall() [03/10/10,07:44:53] setup.exe: [2] CSetupManager::Run() - Call to RunInstall() failed [03/10/10,07:44:59] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0a x64 is not installed. [03/10/10,07:45:00] WapUI: [2] DepCheck indicates XPSEPSC x64 Installer was not attempted to be installed. [03/10/10,07:45:02] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 SP2 x64 was not attempted to be installed. [03/10/10,07:45:02] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.5 (x64) 'package' was not attempted to be installed. [03/11/10,14:19:23] Microsoft .NET Framework 3.0 SP2 x64: [2] Error: Installation failed for component Microsoft .NET Framework 3.0 SP2 x64. MSI returned error code 1604 [03/11/10,14:26:14] WapUI: [2] DepCheck indicates Microsoft .NET Framework 3.0 SP2 x64 is not installed. Thanks!! Yvan

  Read the article

• APC + FPM memory fragmentation without a reason

  - by palmic

  My setup @ debian 6-testing is: nginx 1.1.8 + php 5.3.8 + php-fpm + APC 3.1.9 Because i use automatic deployment with apc_clear_cache() after deploy, my target is to set up APC to cache all my project (up to 612 php files smaller than 1MB) without files changes checking. My confs: FPM: pm.max_children = 25 pm.start_servers = 4 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 APC: pc.enabled="1" apc.shm_segments = 1 apc.shm_size="64M" apc.num_files_hint = 640 apc.user_entries_hint = 0 apc.ttl="7200" apc.user_ttl="7200" apc.gc_ttl="600" apc.cache_by_default="1" apc.filters = "apc\.php$,apc_clear.php$" apc.canonicalize="0" apc.slam_defense="1" apc.localcache="1" apc.localcache.size="512M" apc.mmap_file_mask="/tmp/apc-php5.XXXXXX" apc.enable_cli="0" apc.max_file_size = 2M apc.write_lock="1" apc.localcache = 1 apc.localcache.size = 512 apc.report_autofilter="0" apc.include_once_override="0" apc.coredump_unmap="0" apc.stat="0" apc.stat_ctime="0" The problem is i have my APC memory fragmented into 5 pieces at 14,5MB loaded into memory which capacity is 64M. My system memory is 640MB, used about 270MB at most. The http responses lasts about 300ms - 5s. When i switch on apc.stat="1", the responses are about 50ms - 80ms which is quite good, but i cannot understand why is apc.stat="0" so much whorse. The APC diagnostic tool shows "1 Segment(s) with 64.0 MBytes (mmap memory, pthread mutex Locks locking)" in general cache information window so i hope i am right that it's mmap setup which allows tweaking APC shm onto upper values than shows system limit in /proc/sys/kernel/shmmax (my shows 33MB).

  Read the article

• File is not compatible with the version of Windows you're running

  - by vaccano

  I have a really old installer (legacy app) that we are trying to get running on a Windows 7 64 bit os. Previously it has only been installed on Windows XP 32 bit. I get the following error when I try to run it: The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. Contacting the software publisher is not an option (software is super old). Is there a way to get this to work? Some sort of compatibility mode? The only thing I have heard of that will work is a Virtual XP on the Win 7 box. The problem is that this software is a part of a whole software set. I would have to put all of the pieces on the Virtual XP or none at all. Before I go down the road of putting it all on the virtual xp I would like to know that there is no way to get it all on the Win 7 os.

  Read the article

• What's the right way to start a node.js service?

  - by elliot42

  I'm running a node.js service (statsd) on CentOS 6. What's the proper way to daemonize and start such a service? Potential Daemonizers--are daemonizers supposed to be language-specific or general?: forever (node-specific) daemonize nohup (presumably wrong) start-stop-daemon(debian-only? is this for daemonizing or starting/stopping? what is the Centos equivalent?) Should the app itself really know how to daemonize itself and then have a -d flag? (e.g. via node-daemonize2 or forever-monitor?) Service starters--should these be from the system/distro, or should they be from monitoring tools such as monit?: service? is really /etc/init.d on CentOS? service? is really Upstart on Ubuntu? monit? daemontools? runit? I'm unfortunately new to this--where can I read up on what is the most standard, classic, reliable way of doing this?

  Read the article

• Sun-JRE on CentOS-4.8 RPM error: post-install scriptlet failed, exit status 5

  - by Emyr

  I have a server with CentOS 4.8 installed. The provided is rubbish, but there's only a few months left, and they're busy being sued by Chase bank, so I doubt I can get CentOS 5. I wiped the server clean using Virtuozzo, and found that the default image is VERY empty. I even had to install yum myself. I've reached the point where I want to install TomCat. I downloaded the Sun JRE as a .rpm.bin file, did chmod a+x and ran it. That produced a .rpm file, which I tried installing: [root@host java]# rpm -Uvh jre-6u20-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... jsse.jar... charsets.jar... localedata.jar... plugin.jar... javaws.jar... deploy.jar... error: %post(jre-1.6.0_20-fcs.i586) scriptlet failed, exit status 5 [root@host java]# rpm -evv jre-6u20-linux-i586.rpm D: opening db environment /var/lib/rpm/Packages joinenv D: opening db index /var/lib/rpm/Packages rdonly mode=0x0 D: locked db index /var/lib/rpm/Packages D: opening db index /var/lib/rpm/Name rdonly mode=0x0 error: package jre-6u20-linux-i586.rpm is not installed D: closed db index /var/lib/rpm/Name D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm/Packages [root@host java]# rpm -qi --scripts jre-6u20-linux-i586.rpm package jre-6u20-linux-i586.rpm is not installed [root@host java]# I couldn't find any results on Google for any parts of that error message, and I have very little experience of rpm (I usually use Debian). Is this a broken package, or am I missing something or some setting?

  Read the article

• authbind, privbind or iptables REDIRECT (port 80 to 8080)?

  - by chris_l

  Hi, I'd like to run Glassfish v3 as a non-privileged user on Linux (Debian), but make it available on port 80. I'm currently doing this with iptables: iptables -t nat -I PREROUTING -p tcp -d x.x.x.x --dport 80 -j REDIRECT --to-port 8080 This works, but I wonder: If this has any significant performance impact compared to binding directly to port 80 If I could make a similar setup also work for HTTPS (or if that must run on 443) If there's a way to avoid other users from binding to port 8080 (in case my server crashes) - maybe block that port permanently to other users somehow? ...or if I should use authbind/privbind instead? Problem: I couldn't make it work with authbind or privbind so far. For authbind, I edited asadmin's last line to: exec authbind --deep "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... For privbind: exec privbind -u glassfish "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... (Only) with these settings, I can successfully perform a create-domain --domainport 80. This proves, that authbind and privbind actually work (the authbind version of the script is called by the glassfish user; the privbind version is called by root of course). However, in both cases I get the following exception, when starting the domain (start-domain): [#|2010-03-20T13:25:21.925+0100|SEVERE|glassfishv3.0|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=11;_ThreadName=FelixStartLevel;|Shutting down v3 due to startup exception : Permission denied: 80=com.sun.enterprise.v3.services.impl.monitor.MonitorableSelectorHandler@1fc25e5|#] I haven't found a solution for that yet (after searching the web, it seems, that this isn't so easy?) But maybe, the solution with iptables is good enough - what do you think? Thanks, Chris

  Read the article

• PXE boot and DHCP server configuration Failing Auto Installation

  - by Harihara Vinayakaram

  I have a ISC DHCP Server installed on Ubuntu 9.10 . I have managed to successfully boot a PXE client , obtain a DHCP address and load the initrd.gz file. But I am facing a vague problem when the debian installer starts up and tries to get a DHCP server The client send a DHCP request and I verified that is the same MAC Address. But I get a DHCP DECLINE (The client declines the address ). It offers all the address in the pool and then there is a DHCP NAK (no more free leases ) I tried using the Option no-ping, and also option one-client-one-lease but it does not help . If I set the client to use a fixed-address then the above problem is not there and the installation proceeds smoothly Can you give me any clues on what should be the DHCP server configuration My dhcpd.conf looks like this { ddns-update-style none; option domain-name "hadoop-myorg.org"; option domain-name-servers 192.168.3.5; default-lease-time 600; max-lease-time 7200; group { filename "pxelinux.0"; next-server 192.168.13.184; host hadoop1 { hardware ethernet 90:e6:ba:d5:53:f8; } } subnet 192.168.13.0 netmask 255.255.255.0 { option routers 10.0.0.254; pool { option domain-name-servers 192.168.3.5; max-lease-time 3000; range 192.168.13.55 192.168.13.65; deny unknown-clients; } } }

  Read the article

• LDAP change user pass on client

  - by Sean

  I am trying to allow ldap users to change their password on client machines. I have tried pam every which way I can think of /etc/ldap.conf & /etc/pam_ldap.conf, as well. At this point I'm stuck. Client: Ubuntu 11.04 Server: Debian 6.0 The current output is this: sobrien4@T-E700F-1:~$ passwd passwd: Authentication service cannot retrieve authentication info passwd: password unchanged /var/log/auth.log gives this during the command: May 9 10:49:06 T-E700F-1 passwd[18515]: pam_unix(passwd:chauthtok): user "sobrien4" does not exist in /etc/passwd May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: ldap_simple_bind Can't contact LDAP server May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: reconnecting to LDAP server... May 9 10:49:06 T-E700F-1 passwd[18515]: pam_ldap: ldap_simple_bind Can't contact LDAP server getent passwd |grep sobrien4 (note keeping short since testing with that account, however it outputs all ldap users): sobrien4:Ffm1oHzwnLz0U:10000:12001:Sean O'Brien:/home/sobrien4:/bin/bash getent group shows all ldap groups. /etc/pam.d/common-password (Note this is just the most current, I have tried a lot of different options): password required pam_cracklib.so retry=3 minlen=8 difok=3 password [success=1 default=ignore] pam_unix.so use_authtok md5 password required pam_ldap.so use_authtok password required pam_permit.so Popped open wireshark as well, the server & client are talking. I have the password changing working on the server. I.E. the server that runs slapd, I can log in with the ldap user and change the passwords. I tried copying the working configs from the server initially and no dice. I also tried cloning it, and just changing ip & host, and no go. My guess is that the client is not authorized by ip or hostname to change a pass. Pertaining to the slapd conf, I saw this in a guide and tried it: access to attrs=loginShell,gecos by dn="cn=admin,dc=cengineering,dc=etb" write by self write by * read access to * by dn="cn=admin,dc=cengineering,dc=etb" write by self write by * read So ldap seems to be working okay, just can't change the password.

  Read the article

• Apache2 config problem

  - by Hellnar

  For using my Debian VPS for multiple domains , I did such actions: removed the default one from sites-enabled/ and sites-available/ (config and the symbolic link) and I added this under sites-available/www.mysite.com : <VirtualHost MYIP:80> ServerName mysite.com ServerAlias www.mysite.com Alias /media/ /home/myuser/mysite/media/ Alias /admin_media/ /home/myuser/django/Django-1.2/django/contrib/admin/media/ WSGIScriptAlias / /home/myuser/mysite/wsgi.py ErrorLog /home/myuser/mysite/logs/error.log CustomLog /home/myuser/mysite/logs/access.log combined </VirtualHost> And I have changed my ports.conf to: NameVirtualHost MYIP:80 Listen 80 <IfModule mod_ssl.c> # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here Listen 443 </IfModule> Lastly I enabled the new domain via the command: a2ensite www.mysite.com After restart I get this error: myuser:~# /etc/init.d/apache2 restart Restarting web server: apache2apache2: Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/sites-enabled/www.birertek.com: /etc/apache2/sites-enabled/www.birertek.com:1: <VirtualHost> was not closed. failed! Please help this poor soul.

  Read the article

• VMWare Converter - Remote Linux Install P2V

  - by Zed Said

  I am trying to get what I thought was an easy process working. Here is my situation. I have a remote linux server (running Debian) that I would like to turn into a VM so that I can do testing on it rather than the production server. I downloaded VMWare Converter. I went to the "convert machine" wizard, chose Powered-on machine, entered my remote machine details. Clicking next shows that it correctly connects to my remote linux box. Now, on the next screen, for Destination type, it enters "WMWare Infrastructure virtual machine", and I can't change this. This is where I am stuck. Why do I need another sever to convert with? Is this where my VM gets sent to? And why can't I just convert the VM and save it on the computer that I am running the converter program on? If I do have to use a vmware infrastructure destination, I am confused at what ESX is, why and how I use it. Any help with this process would be more than appreciated!

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• Why does bash sometimes think my $HOME isn't the correct directory?

  - by Adam Yanalunas

  Like the title says it seems that bash sometimes misidentifies my $HOME. This cropped up after a seemingly unique series of events that I will now replay in broad strokes. Running OS X 10.6 with normal, local account Work binds my account to Active Directory Much time passes with no issues Set up rvm to manage Ruby installs (this becomes important later) Upgraded to OS X 10.7 a few days ago After successful install, attempted to log in, was presented with "Must reset password" dialog that never allowed a password to be reset. Would simply shake the box after new password was entered. Much googling was done. Much more googling was done. Swearing was had. Logged in as root, created new account, set as admin, deleted /Users/[new account], renamed /Users/[old account] to /Users/[new account] Logged out of root, logged into new account with no issues After OS X asking for a my account password a few times to update Keychain and other system-level stuff it was back to business as usual. Opened Terminal, cd to project folder, tried "rails server" and was presented with: /usr/local/lib/ruby/1.9.1/rubygems/dependency.rb:247:in to_specs': Could not find rails (>= 0) amongst [] (Gem::LoadError) from /usr/local/lib/ruby/1.9.1/rubygems/dependency.rb:256:into_spec' from /usr/local/lib/ruby/1.9.1/rubygems.rb:1210:in gem' from /usr/local/bin/rails:18:in' Ran through a few exercises, decided to rm -rf ~/.rvm and reinstall. Running a --trace on the rvm installer shows it dies on this line: mkdir: /Users/[old account]: Permission denied Scrolling back through the --trace log I see many more mentions of /Users/[old account]. When inspect the install script the offending line is looking at "${HOME}/.rvm" as it tries to run the mkdir. To my confusion I also see mentions of /Users/[new account] in the log. I've tried exporting a new HOME in my .bash_profile to no luck. Can anyone guess why /Users/[old account] would still be kicking around?

  Read the article

• Login box not shown on Ubuntu

  - by Alexandre

  I've installed Ubuntu 10.04 (64bit) as a guest OS in VirtualBox, using Windows7 Professional (64bit) as host. After Ubuntu install, I did installed Xfce4 (sudo apt-get install xfce4). Logged in using a Xfce session, and when I logged out, I couldn't see the login box anymore, only the regular gnome background from login screen. Then I restarted the virtual machine, and now I'm not able to see the login box anymore, only the gnome background. Does someone knows how to solve this? Thanks in advance Update: I've tried to use Xubuntu, that comes with Xfce. And I'm facing the same problem. As a common denominator from the two cases, now I see the problem arises after I've updated the system, and then installed curl (via apt-get), zlib (make process), git (make process). But I'm not sure this can be the cause for this ... Update: I isolated the problem. The bad guy is zlib, but I don't have a clue why. In fact, it does crash not only ubuntu and xubuntu, but also Debian (Yes, I've tested all). I'll keep this question in case someone have the same problem, but I think my initial question is not valid anymore.

  Read the article

• 16-bit MS-DOS Subsystem: csrss.exe

  - by Wesley

  Hi all, I just booted up my Samsung N120 netbook (with Windows XP Home SP3) and a dialog box came up with a command prompt window behind it. The dialog box is titled 16 bit MS-DOS Subsystem and the message is as follows: C:\DOCUME~1\SAMSUNG\csrss.exe The NTVDM CPU has encountered an illegal instruction. CS:0544 IP:0117 OP:63 00 64 00 34 Choose 'Close' to terminate the application. This only started on my most recent boot-up. One thing to note is that when I downloaded the Dropbox installer and opened it up, Panda Cloud Antivirus detected a suspicious file, which was csrss.exe and "neutralized it." However, an actual virus or trojan was not detected immediately before the file was detected and neutralized. Just under two weeks ago, a trojan and two viruses were detected for some odd reason. (I only went to website I knew and I do not torrent or browse adult sites.) Anyhow, the two viruses came up in temporary files and the trojan was "neutralized." Anyways, the main question is: How can I repair the csrss.exe file such that Windows XP starts up properly? A screenshot could be posted upon request. Thanks in advance!

  Read the article

• Can a wifi AP act as a client, and a server at the same time?

  - by nbolton

  I feel this is SF worthy (as opposed to SU) as I go into a bit of detail on gateways/routing. Here's my ideal setup (if possible) -- there is a wifi network (lets call it bob's) with which I want access to, but I have a few other computers on my network which I want to keep behind a firewall. So I was thinking of buying a wireless access point so that I could set it up to connect to bob's network from the AP, and then from my server, connect to the AP via ethernet. So that's the first bit. Second part is that I want to have my own private wifi network off the back of this; can I then tell the AP to serve a new network called foobar. When I say private network, I mean that my server is actually a Debian linux install with routing configured (and I also do some QoS stuff on, etc). So ideally, I'd like all the clients on the private network to be behind the server in terms of routing. However, if the private clients connect to the server via wifi, then aren't they exposed to the "public" network? That is, if someone is savvy enough to scan for my IP range. Also, to do routing I'd need to connect two ethernet cables between the server and the AP (because you can't do routing/QoS on virtual devices) -- which isn't a problem really; but I'm not sure whether the AP will allow me to separate the public and private LANs. Or, as well as the AP, am I better getting a wifi-to-ethernet adapter for the server? I could use a wifi usb, but this can be tricky to set up on headless linux; plus the signal strength is a bit lousy. If this question is a bit vague/spurious in places, please comment and I will explain in more detail.

  Read the article

• Getting Perl DBD::mysql working on OS X 10.7?

  - by Bart B

  I can't seem to get Perl & MySQL to talk to each other on OS X 10.7 Lion. I did all the installs by the book, I used Oracle's PKG installer for the latest MySQL Community Server, and I installed DBI and DBD::mysql via CPAN. There were not problems at all during the install, but, when I try to USE DBD::mysql to connect to my local DB server I get the following error: install_driver(mysql) failed: Can't load '/Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle' for module DBD::mysql: dlopen(/Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle, 1): Library not loaded: /usr/local/mysql/lib/libmysqlclient.16.dylib Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Reason: image not found at /System/Library/Perl/5.12/darwin-thread-multi-2level/DynaLoader.pm line 204. at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a required shared library or dll isn't installed where expected After a lot of googling all I could find were suggested hacks, so I gave this one a go: http://arkoftech.wordpress.com/2011/02/10/fixing-dbdmysql-for-mysql-5-5-89-under-macos-10-6-x/ I had to update some of the paths in the instructions since on Lion it's Perl 5.12 not 5.10. After doing that I got a new error: dyld: lazy symbol binding failed: Symbol not found: _mysql_init Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Expected in: flat namespace dyld: Symbol not found: _mysql_init Referenced from: /Library/Perl/5.12/darwin-thread-multi-2level/auto/DBD/mysql/mysql.bundle Expected in: flat namespace Trace/BPT trap: 5 There must be a simple way to get MySQL & Perl working on OS X? - HELP!

  Read the article

• mysql_tzinfo_to_sql missing on my system

  - by Sk1ppeR

  I ran into problem with timezones within MySQL. Long story short, my application is worldwide, and each database has it's own timezone set within the application (not the server) in the way of "Europe/Berlin", "Europe/Vienna", "America/Sao Paulo". Obviously this is unacceptable for MySQL at first per connection. I read that it handles data better if you use UTC offsets. Basically my goal is to log a field's alteration in another table using a trigger. For that I use UNIX_TIMESTAMP within the trigger. Although UNIX_TIMESTAMP() follows the global timezone for the server which obviously bothers me a lot :| So I went to search for a "per connection" solution to use inside the trigger and well I found that mysql_tzinfo_to_sql can actually import zone info (UTC offsets) from my linux's zoneinfo files. Although to my amuse, when I ran the commant I got the following: bash: mysql_tzinfo_to_sql: command not found So I'm looking for a solution to fix that. I don't want to "map" the timezone names into UTC offset just so I could use in the trigger. Is there an alternative tool? Or at least sources for this one in particular only? What kind of queries does this tool generates so I could do it manually then if there is no alternative tool. Thanks in advance on any help on the issue! P.S: The OS is Debian GNU/Linux 6.0 and the MySQL server is the one from aptitude with performance tweaks with my.cnf

  Read the article

• Problem setting command-line console resolution. vbeinfo in grub2 does not report all resolutions

  - by Kent

  I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub: grub> vbeinfo VBE info: version: 3.0 OEM software rev: 1.0 total memory: 8128 KiB List of compatible video modes: Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved 0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x114: 800 x 600 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 0x115: 800 x 600 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x101: 640 x 480 x 8 Packed 0x103: 800 x 600 x 8 Packed 0x111: 640 x 480 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 Configured VBE mode (vbe_mode) = ox101 grub> Relevant parts of sudo lspci -v: ... ... 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... ... ... Any ideas on how I can set the console resultion like I want it?

  Read the article

• Update to Lion, Cannot boot into Bootcamp partitions, but can use in Parallels

  - by Jon Jester

  Using Snow Leopard had boot camp partitions for both XP and Windows 7. These were both accessible through Parallels 7 or through direct boot through boot camp. Each is on a separate partitioned hard drive. Upgraded to Lion, both were still accessible through Parallels, but have not been able to directly boot into either. Unfortunately is important to me to be able to boot into a least the Windows 7 partition. Have tried virtually everything I can find online. Seen similar issues, but nothing where they were usable virtually but not directly. Nothing works. reFit, correcting the master boot records in Windows with command line, have wiped the Windows 7 partition clean and reinstalled Windows 7 several times 1st using Boot Camp4 drivers then using Boot Camp3 drivers. Have tried resizing the bootcamp partitions. When booting into the Boot Camp partitions directly will go all the way to seeing the desktop before it fails, where I get a Windows error screen. I can see all the disks and their appropriate partitions both in OS X disk utility as well as the Windows installer utility.

  Read the article

• Problem while Installing mysql cluster

  - by Champion

  I downloaded latest mysql cluster file 64 bit (mysql-cluster-gpl-7.1.9-linux-x86_64-glibc23) from mysql site. Ran following command to install mysql server. /home/mysql_cluster/mysqlc/scripts/mysql_install_db --no-defaults --basedir=/home/mysql_cluster/mysqlc --datadir=/home/mysql_cluster/my_cluster/mysqld_data It's giving following issues. /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Neither host 'db' nor 'localhost' could be looked up with /home/mysql_cluster/mysqlc/bin/resolveip Please configure the 'hostname' command to return a correct hostname. If you want to solve this at a later stage, restart this script with the --force option My host is pinging and hostname command gives correct hostname. I tried also with --force option force but still not working giving following issues: /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 245: /home/mysql_cluster/mysqlc/bin/my_print_defaults: No such file or directory Installing MySQL system tables... /home/mysql_cluster/mysqlc/scripts/mysql_install_db: line 393: /home/mysql_cluster/mysqlc/bin/mysqld: No such file or directory Installation of system tables failed! Examine the logs in /home/mysql_cluster/my_cluster/mysqld_data for more information. It says above files doesn't exist but this files are present checked with ls command. We are using XEN VM with 64 bit debian lenny os. How this issue can be resolved ?

  Read the article

• Short POST data in HTTP

  - by Matt

  We're hosting a customer's Debian Linux web server. It's running a PHP based web application. The server is sitting behind our firewall with it's own virtual interface and port 80 is forwarded internally to a machine sitting in the DMZ. The issue we're having is that when data is posted to the server it seems to be being cut short for some users. It's reproducable for some users on the same box. But the same user sending the same data on the same lan on another PC it works. The data gets cut to around 1140 bytes I'm told. Any idea why this might be happening? The customer is blaming our firewall, but then surely we'd have issues with other services. I'm suspecting it's a problem with the website itself. Suggestions on how to isolate the problem would be of help. Our firewall is Astaro. EDIT: A customer has set the ethernet frame size temporarily to 500bytes on the server. This made it work for now! I know some of the customers are using an internet provider that runs PPPoE

  Read the article

• QT Creator 64-bit Snow Leopard

  - by quadelirus

  I have a bunch of libraries that I need to link against that I installed via macports. They are 64-bit libraries. I'm working on an application written with QT Creator and the .pro is set up. I downloaded the QT SDK for Mac OS X, but it is 32-bit and so the compiled code won't link against the 64-bit binaries that I got from macports. Ok. So I downloaded the QT SDK source and built from source using -arch x86_64. Now I have a 64-bit version of the SDK (I think) but it didn't build a QT Creator app. So. I need to know one of 4 things: Either, 1.) I'm guessing that a simple make command will convince the QT SDK to build the creator for me. If this is true, then what is the command (make creator?). barring that, I need to know 2.) The easiest way to get MacPorts to redownload the libraries that I installed with a 32-bit version (I keep seeing a "+universal" mentioned, but I haven't seen it on a line, and simply calling ports +universal install XYZ doesn't seem to work--perhaps I need to uninstall and reinstall the package?). Also, is this a stupid idea? or 3.) Someone who actually has a prebuilt 64-bit QT SDK installer so I don't have to mess with this. It is ridiculous that QT doesn't already have this available, in my opinion--SL has been out since, what, last August? 4--and this would take the cake.) I don't understand why I can't simply put a "compile-for-64-bit stupid" command directly into the QT pro file and have it build. There isn't really a reason why a compiler compiled in 32-bits couldn't compile to 64-bits is there? Thanks.

  Read the article

• Should I use /etc/bind/zones/ or /var/cache/bind/?

  - by nbolton

  Each tutorial seems to have a different opinion on this. For my ISC BIND zones, should I use /etc/bind/zones/ or /var/cache/bind/? In the last install, I used /var/cache/bind/ but only because I was guided to do so; however I just spotted a pid file in there for this new Debian install, so I figured that using the "working directory" to store zone files probably wasn't the best idea. It seems that many admins use this so they don't have to type the full path when declaring a new zone. For example: file "/etc/bind/zones/db.foobar.com"; Instead of: file "db.foobar.com"; Is obviously easier to type, but is it good or bad practice? Some may also suggest setting the working directory to /etc/bind/zones: options { // directory "/var/cache/bind"; directory "/etc/bind/zones"; } ... but something tells me this isn't good practice, since the pid file would be created there I assume (unless it's just in /var/cache/bind by coincidence). I took a look at the manpage but it didn't seem to say what the directory option was for, any ideas exactly what it was design for?

  Read the article

• Reloading NAT configuration on a running VMWare Server 2.0.2

  - by Jonathan Clarke

  I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >