Search Results

Search found 28682 results on 1148 pages for 'drop down menu'.

Page 207/1148 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • Bind DropDownList with Hierarchy from MSSQL Table with ASP.NET C#

    - by Gal V
    Hello all, I have the following sql table which contains menu (website menu) data. Table Name: MenuItems Columns: Id, MenuId, ParentMenuItemId, Text. My goal is to bind a DDL according to the following hierarchy (example): Id: 1, MenuId: 1, ParentMenuItemId: -1, Text: 'One' Id: 2, MenuId: 1, ParentMenuItemId: 1, Text: 'Two' Id: 3, MenuId: 1, ParentMenuItemId: 1, Text: 'Three' Id: 4, MenuId: 1, ParentMenuItemId: 2, Text: 'Four' Id: 5, MenuId: 1, ParentMenuItemId: 4, Text: 'Five' Requested result in DDL: One -- Two ---- Four ------ Five -- Three I think it should contain 'WITH' SQL command. Thanks all!

    Read the article

  • Oracle Internet Directory - Required Schemas already loaded

    - by Brandon Kreisel
    After a successful installation of Oracle Internet Directories (OID) I attemped to remove and re-install it with a different configuration. First I ran ./runInstaller.sh -deinstall from the OID middleware directory to uninstall. Then i ran the installer again but it complained on the Specify Schema Database step. Upon connecting to the database, the installer threw: INST-5174: Required schemas are already loaded in the specified database. I connected to the target database and removed the OID schemas I knew of SQL> drop user ODS cascade; SQL> drop user ODSSM cascade; That didn't not work and the error still appears. What steps am I missing? Note: The Database is 11g and it was brand new before installing OID so there is no other data select * from all_users doesn't show any other schemas related to OID from what I can tell, the latest user creation date is OCT 2010

    Read the article

  • Can't connect to website after altering IPTables

    - by user2833135
    I attempted to open up a port on my VPS, but I can't connect to my website after opening up that port. Below are the commands I issued to open the port. I didn't get an error or anything after setting this up. I just can't connect to my website after doing this. [root@vps ~]# iptables -F [root@vps ~]# iptables -A INPUT -i lo -j ACCEPT [root@vps ~]# iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT [root@vps ~]# iptables -A INPUT -p tcp --dport 25765 -j ACCEPT [root@vps ~]# iptables -P INPUT DROP [root@vps ~]# iptables -P FORWARD DROP [root@vps ~]# iptables -P OUTPUT ACCEPT [root@vps ~]# iptables -L -v Just a side note, but I am running CentOS 6 (64 bit) Thank you in advance.

    Read the article

  • Windows 7 and wallpaper folders

    - by Andi
    I try to change my desktop wallpaper and I cannot choose a different folder from the one I chose at first... When I first installed W7 I changed the wallpaper by right-clicking in the desktop and choosing Customize (maybe it's not correct because I use the italian version) and then Change Wallpaper in the bottom and finally I browsed for a folder with some images in and chose the wallpaper. When I do the same exact things now, the folder I select in the final pass is not selected: I mean its pictures are not shown and it doesn't appear in the drop-down list. I can put a specific picture as a wallpaper by selecting it through Explorer, and some times (not always) the folder shows in the drop-down list. Is there any possible solution to this?

    Read the article

  • IPSec VPN's being dropped by router and will not re-establish

    - by David Gard
    We have 3 sites, with our two remote sites connection to head office via LAN-to-LAN VPN's. All 3 sites use DrayTek 2900's with firware version v3.3.1.1_RC2 (this is a release candidate that DrayTek suggested I try, but sadly it made no difference). The only way to re-establish the VPN's once they have been dropped is to restart the router. Head office is set to dial out to both sites, with both the 'Always on' and 'Enable PING to keep alive' (pinging a server in the remote offices) options ticked. However, at random intervals the VPN's drop, logging IKE_RELEASE VPN : Dial-out Profile Index = 7, Name = Shepton (for one connection, and '6' & 'Wincanton' for the other connection). I first tried swapping the router with one at another site, and then had all three replaced, but that failed to solve the problem. Is anyone aware of anything that could cause the VPN's to drop randomly like this? Thanks.

    Read the article

  • jquery load not loading in IE6

    - by Moak
    I got a simple jquery script workin on all but IE j('.slide').click(function(){ j('#content').load('/menu.php'); return false; }); Here's the url http://identitykit.gotdns.org/ it's valid xhtml and all other similar questions don't answer my problem. menu.php starts with <?php header("Cache-Control: no-cache, must-revalidate"); // HTTP/1.1 header("Expires: Sat, 26 Jul 1997 05:00:00 GMT"); // Date in the past ?>

    Read the article

  • Do all Mac OS X applications require Admin permissions to 'install'?

    - by Andy
    I'm new to the whole Mac OS X operating system. I'm trying to learn and I've got myself a MacBook running Mac OS X 10.7.3. I've created a test user that can not administrate so that I can test out permissions and I've found that I can not do anything in the Applications folder, which includes 'installing' applications (even those drag 'n' drop ones) and creating folders, without entering an Admin name and password. However, I was under the impression that this wasn't the case and you only needed Admin permissions to write to somewhere like Preferences, so can somebody please clarify why it is asking for Admin when I try to drag 'n' drop applications into the Applications folder.

    Read the article

  • Iptables config breaks Java + Elastic Search communication

    - by Agustin Lopez
    I am trying to set up a firewall for a server hosting a java app and ES. Both are on the same server and communicate to each other. The problem I am having is that my firewall configuration prevents java from connecting to ES. Not sure why really.... I have tried lot of stuff like opening the port range 9200:9400 to the server ip without any luck but from what I know all communication inside the server should be allowed with this configuration. The idea is that ES should not be accessible from outside but it should be accessible from this java app and ES uses the port range 9200:9400. This is my iptables script: echo -e Deleting rules for INPUT chain iptables -F INPUT echo -e Deleting rules for OUTPUT chain iptables -F OUTPUT echo -e Deleting rules for FORWARD chain iptables -F FORWARD echo -e Setting by default the drop policy on each chain iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -P FORWARD DROP echo -e Open all ports from/to localhost iptables -A INPUT -i lo -j ACCEPT echo -e Open SSH port 22 with brute force security iptables -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --set --name SSH --rsource iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 4 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j LOG --log-prefix "SSH brute force " iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --update --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT echo -e Open NGINX port 80 iptables -A INPUT -p tcp --dport 80 -j ACCEPT echo -e Open NGINX SSL port 443 iptables -A INPUT -p tcp --dport 443 -j ACCEPT echo -e Enable DNS iptables -A INPUT -p tcp -m tcp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -p udp -m udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT And I get this in the java app when this config is in place: org.elasticsearch.cluster.block.ClusterBlockException: blocked by: [SERVICE_UNAVAILABLE/1/state not recovered / initialized];[SERVICE_UNAVAILABLE/2/no master]; at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:292) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1185) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:537) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:475) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:304) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:228) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:300) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:195) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:700) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:760) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:482) at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:403) Do any of you see any problem with this configuration and ES? Thanks in advance

    Read the article

  • Postgres 9.0 locking up, 100% CPU

    - by Jake
    We are having a problem where our Postgres 9.0 server occasionally locks up and kills our webapp. Restarting Postgres fixes the problem. Here's what I've been able to observe: First, usage of one CPU jumps to 100% for a few minutes Disk operations drop to ~0 during this time Database operations drop to 0 (blocks and tuples per sec) Logs show during this time: WARNING: worker took too long to start; cancelled WARNING: worker took too long to start; cancelled No Queries in logs (only those over 200ms are logged) No unusually long-running queries logged before or during Then the second CPU jumps to 100% The number of postgres processes jumps from the usual 8-10 to ~20 Matched by a spike in Postgres Blocks per second (about twice normal) Logs show LOG: could not accept SSL connection: EOF detected Queries are running but slow Restarting postgres returns everything to normal Setup: Server: Amazon EC2 Large Ubuntu 10.04.2 LTS Postgres 9.0.3 Dedicated DB server Does anyone have any idea what's causing this? Or any suggestions about what else I should be checking out?

    Read the article

  • Windows 7 does not recognise second display output

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • jquery show/hide integrated with toggle/accordion effect

    - by mark
    I have a show/hide toggle working well in multiple instances (thanks to help here - search for 'jquery toggle to work in multiple instances'). I want to integrate it into an expanding menu / accordion style for the main categories. I have a script and it works on its own but I can't get it to work integrated with the show/hide. Any help greatly appreciated. The working show/hide: http://pastebin.me/c69869d7a80fdb439ca16304b821c146 the expanding menu script I want to integrate: http://pastebin.me/03b685f586fef84193b5fd72e815255d

    Read the article

  • Security log overflowing with filtering blocks

    - by Jacob
    I have a Windows 7 workstation whose security log is overflowing with the following errors: Audit Failure 3/31/2010 2:00:50 PM Microsoft-Windows-Security-Auditing 5157 Filtering Platform Connection "The Windows Filtering Platform has blocked a connection." Audit Failure 3/31/2010 2:00:50 PM Microsoft-Windows-Security-Auditing 5152 Filtering Platform Packet Drop "The Windows Filtering Platform has blocked a packet." These are not unexpected events; the firewall is expected to drop unsolicited traffic. However, I can't figure out how to tell Windows to stop writing these events to the security log. I've seen this problem before and have been able to find an answer with the use of Google, but I wasn't able to locate on this this time. Thanks!

    Read the article

  • Linux Transparent Bridge for Network

    - by Blackninja543
    I am attempting to set up a semi-transparent bridge. I say semi because I want it to act as a transparent tap for all traffic moving through both sides of the bridge. What I also want is to have the "green zone" accessible to a web interface for the bridge that will display all results of the IDS and other network monitoring tools. My example would be as such: eth0 <--> bridge(br0) <--> eth1 The entire network would be on the same subset however anything coming from eth0 to eth1 would be accepted. The only time anything would be drop is if the eth0 attempted to access br0. If someone attempts to access the web interface on br0 through eth1 it will succeed. My biggest problem I feel is if I attempt to block anything from eth0 to br0 this will drop the bridge all together.

    Read the article

  • Looking for ideas how to refactor my (complex) algorithm

    - by _simon_
    I am trying to write my own Game of Life, with my own set of rules. First 'concept', which I would like to apply, is socialization (which basicaly means if the cell wants to be alone or in a group with other cells). Data structure is 2-dimensional array (for now). In order to be able to move a cell to/away from a group of another cells, I need to determine where to move it. The idea is, that I evaluate all the cells in the area (neighbours) and get a vector, which tells me where to move the cell. Size of the vector is 0 or 1 (don't move or move) and the angle is array of directions (up, down, right, left). This is a image with representation of forces to a cell, like I imagined it (but reach could be more than 5): Let's for example take this picture: Forces from lower left neighbour: down (0), up (2), right (2), left (0) Forces from right neighbour : down (0), up (0), right (0), left (2) sum : down (0), up (2), right (0), left (0) So the cell should go up. I could write an algorithm with a lot of if statements and check all cells in the neighbourhood. Of course this algorithm would be easiest if the 'reach' parameter is set to 1 (first column on picture 1). But what if I change reach parameter to 10 for example? I would need to write an algorithm for each 'reach' parameter in advance... How can I avoid this (notice, that the force is growing potentialy (1, 2, 4, 8, 16, 32,...))? Can I use specific design pattern for this problem? Also: the most important thing is not speed, but to be able to extend initial logic. Things to take into consideration: reach should be passed as a parameter i would like to change function, which calculates force (potential, fibonacci) a cell can go to a new place only if this new place is not populated watch for corners (you can't evaluate right and top neighbours in top-right corner for example)

    Read the article

  • Blackberry: How to properly handle focus traversal in custom field?

    - by DaveJohnston
    I am writing an app for Blackberry and I have the following problem: I have implemented a custom field by extending the Manager class. The field is quite simple, it consists of a label and two check boxes, yes and no. The fields are laid out so that the label is on the left and uses as much space as it can while still allowing room for the check boxes which are positioned next to each other at the right and vertically centred compared to the label (if it spans more than one line). So it looks like this: This is a question? O Yes O No Everything is fine so far in terms of laying out the fields. But now I am trying to handle focus traversal. First of all the default behaviour when the user scrolls up or down is to move between the yes and no options. I want to move to the next field above or below when up or down is pressed, so I did this: protected int moveFocus(int amount, int status, int time) { if (status == 537001984 || status == -1610481664) { // Up or down was pressed // Don't move focus between yes and no when up or down is pressed. return amount; } return super.moveFocus(amount, status, time); } And that seems to work. The next thing I would like to do is to remember which option last had the focus when the field loses focus, then on gaining focus again (regardless of which direction the focus comes from) set this field to have the focus. I tried overriding onUnfocus and onFocus so that onUnfocus I note which field was focussed then onFocus setFocus to that field. But I get a StackOverflowError, I guess because the call to setFocus on a field within the manager actually calls onFocus for the manager itself again?? So does anyone know how I should be doing this? I checked the DateField and it has the exact behaviour I am looking for, i.e. it remembers if you were last on the day, month or year field and sets this field to focus when the field itself gets the focus.

    Read the article

  • [C#, WinForms] Handle that Shift+F10 w(h)as pressed

    - by Alexander Stalt
    I want to use the exclusive key to open context menu that are available in most of the new laptops and keyboards. This key is usually available between right ALT and CTRL key. I am not sure that it is always equivalent to "Shift + F10" ( or is it always equivalent to "Shift+F10" ?). My programs runs on Windows XP and earlier versions. Context menu should appear at mouse cursor position (if it's possible).

    Read the article

  • Android - Hide all showed Toast Messages

    - by crazyV
    Hey guys, i have a problem, how do I disable all toast messages being process currently? In my App, there is a list, when a user clicks on an item, a toast message is being displayed, 10 items - 10 toast messages, so if the user clicks 10 times, then presses the menu button... he has to wait for some seconds, until he's able to read the menu option text. shouldn't be like that :) thanks a lot! greets //did research, nobody asked something similar, hopefully //some keyboards: disable hide toast messages from showing deactivate stop

    Read the article

  • Windows 7 does not recognise second display output [closed]

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • Block IP Address including ICMP using UFW

    - by dr jimbob
    I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

    Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >