Search Results

Search found 9845 results on 394 pages for 'xbox controller'.

Page 207/394 | < Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >

• Unity very slow while Gnome Classic running just fine

  - by Sorin Sbarnea

  I see tons of people complaining about Unity speed and I think the problem is not with the video drivers. When I login to Gnome Classic the system is behaving just fine, but when on Unity I can barely do use it: windows are moved hard, terminal is damn slow. Is there any solution or bug that I should track? Details Ubuntu 11.10 Two monitors setup Latest Nvidia proprietary drivers (tested with default ones also, no change) 6GB RAM, Xeon @ 2.8 Nvidia Driver 280.13 - Quadro NVS 295 with 8 cores 256MB RAM. lspci | grep VGA 02:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 295] (rev a1) uname -a Linux sorins 3.0.0-16-generic #29-Ubuntu SMP Tue Feb 14 12:48:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• BlueNES: A Bluetooth Connector for Classic NES Controllers

  - by Jason Fitzpatrick

  If you’re looking for a DIY way to hook up your classic Nintendo controllers for use in modern emulation programs, this hack allows you to use them without modifying the original casing or cables. Courtesy of Evan Dustin, we find this guide on hacking apart a broken NES unit (to get the basic parts like the port connectors) and then binding it all together with an Arduino board. Check out the video above to see it in action and then hit up the link below to check out the notes on the YouTube video for additional information including parts and code. BluesNES: Bluetooth NES Controller [via Hack A Day] HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

  Read the article

• Agent versus Agentless management

  - by Owen Allen

  I got a couple of questions about Agentless asset management: "What does agentless management do for an asset?" Agentless management is one of the two ways that you can manage an operating system. Rather than installing an Agent Controller on the OS, agentless management uses SSH to regularly check the system and gather monitoring data. Many of the actions that would be available on an agent-managed system are available on an agentless system, but actions such as running reports or updating an Oracle Solaris 10 or Linux OS are not available. A table showing the capabilities of agentless management is here. "What permissions does agentless management require?" Agentless management still requires root credentials. If you can't log into the system as root, you can provide one set of credentials for the login, and then a set of root credentials to switch to.

  Read the article

• HP EliteBook 8440p screen flickers after blank screen (nvidia)

  - by fliegenderfrosch

  When my screen turns blank after 10 min or after locking the screen and I begin using the laptop again, the screen is flickering. It looks as if every second line of pixels is blinking and the flickering is mainly present in the upper part of the screen. I am using Ubuntu 12.04 with the latest binary Nvidia drivers (current-updates). lshw | grep VGA tells me: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 3100M] (rev a2) The problem doesn’t occur after sleeping or on an external display. I used Kubuntu 11.10 before, where the problem didn’t occur either. Is there anything I can do except waiting for new drivers?

  Read the article

• Ralink RT3060 Driver not working

  - by Hoerlle

  I am new to linux. I was using fedora and now switching to Ubuntu for a try. On Fedora my wireless network card was working OK from the OS install (I didnt had to do anything for it to work) On Ubuntu, with the lspci -v command, I get: Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Ralink corp. RT3060 Wireless 802.11n 1T/1R Flags: bus master, slow devsel, latency 64, IRQ 20 Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci Kernel modules: rt2800pci But I am not able to find any wireless network. What to do now? Thanks

  Read the article

• Models, controllers, and code reuse

  - by user11715

  I have a blog where users can post comments. When creating a comment, various things happen: creating the comment object, associations, persisting sending notification emails to post's author given his preferences sending notification to moderators given their preferences updating a fulltext database for search ... I could put all this in the controller, but what if I want to reuse this code ? e.g. I would like to provide an API for posting comments. I could also put this in the model, but I wonder if I won't lose flexibility by doing so. And would it be acceptable to do all of this from the model layer ? What would you do ?

  Read the article

• Connecting 2 ubuntu machines as a LAN

  - by Brendan Cutjar

  Hi i am trying to connect 2 ubuntu computers as a LAN. In my current setup I have: One machine running ubuntu 11.10 with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller While the other machine is running Ubuntu 12.04 with an Atheros Communications Inc AR8152 v1.1 Fast Ethernet The two machines are connected via a switch (Edimax ES-3205P). Unfortunately I still cannot connect the two machines together. Can somebody please show me what to do and how to go about solving this issue? Thank you ANSWERED All I had to do was set up both ip's maually, subnet mask to 255.255.255.0 and left blank both gateway and DNS.

  Read the article

• Using GridView and DetailsView in ASP.NET MVC - Part 1

  - by bipinjoshi

  For any beginner in ASP.NET MVC the first disappointment is possibly the lack of any server controls. ASP.NET MVC divides the entire processing logic into three distinct parts namely model, view and controller. In the process views (that represent UI under MVC architecture) need to sacrifice three important features of web forms viz. Postbacks, ViewState and rich event model. Though server controls are not a recommended choice under ASP.NET MVC there are situations where you may need to use server controls. In this two part article I am going to explain, as an example, how GridView and DetailsView can be used in ASP.NET MVC without breaking the MVC pattern.http://www.bipinjoshi.net/articles/59b91531-3fb2-4504-84a4-9f52e2d65c20.aspx 

  Read the article

• Invoke WCF rest service razor mvc 4

  - by Raj Esh

  I have been using jQuery to access my REST based wcf service which does not export the meta information. Using ajax, i could populate data into controls. I need guidance and directions as to how i can use these Rest service in my controller. I can't add Service reference to my MVC 4 project since my WCF rest does not to expose Metadata. Should i use UNITY? or any other DI frameworks?. Any sample would be of great help.

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• Cannot control the fan on a Sony Vaio laptop

  - by Xobb

  I've got Sony Vaio laptop and my fan is on all the time, though the temperature on the video-adapter is always over 60°?. As I've googled, vaiofand does not support VPC-EA series. Is there anything I can do with that or I need another laptop? I'm using the following graphics card: 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] though the problem is not with the graphics card. I've mentioned its temperature as the highest (64°C now btw). Seems like the notebook is always overheated and I cannot control the fan speed to make it cooler. And yes, I'm using the proprietary driver ATI/AMD FGLRX graphics driver. I'm using Kubuntu 11.04.

  Read the article

• Nvidia G96 [GeForce 9400 GT] and application graphic issues

  - by Fabio

  I've got a quite old NVIDIA graphic card and I with installed restricted drivers from Settings panel (as also shown in this thread). ? ~ lspci 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) I tried a lot of them: version 173-update, current, beta, but the only one that can run unity-2d it's current-update. That's Ubuntu 12.04.1 LTS 64bit. However... Unity crashes, sometimes windows border disappear, Java Virtual Machine doesn't works, font rendering it's slow and so on. How can I solve this? Some suggestions? Thanks!

  Read the article

• Should a view and a model communicate or not?

  - by Stefano Borini

  According to the wikipedia page for the MVC architecture, the view is free to be notified by the model, and is also free to query the model about its current state. However, according to Paul Hegarty's course on iOS 5 at Stanford, lecture 1, page 18 all interaction must go through the controller, with Model and View that are never supposed to know each other. It is not clear to me if Hegarty's statement must be intended as a simplification for the course, but I am tempted to say that he intends the design as such. How do you explain these two opposite points of view ?

  Read the article

• install Cirrus Logic cs46xx (audio card) drivers

  - by Aikanáro

  I have two sounds cards, one is the on-board (it's VIA) the other is Cirrus Logic cs46xx. This is what lspci shows me: 04:04.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01) It only show the cirrus logic, cause I disable the VIA card through BIOS. This page: http://es.driverscollection.com/?file_id=13152 gives me instructions to install it, but I can follow them because the folders indicates in the page do not matches with the ones that I see in my system. The alsa page: http://alsa-project.org/main/index.php/Matrix:Module-cs46xx, also give me instructions, but I don't understand it. For example, they say: type in a terminal: ./configure but don't say in what directory. I think that isn't instructions for begginers... Right now I can't heard anything. I decide to disable the VIA audio card, cause I've read they don't get along with linux, although i use the integrate VIA video card. I have ubuntu 11.10

  Read the article

• Juju didn't configure rabbitmq for openstack?

  - by SaM

  I have installed ubuntu Openstack HA with juju with all 24 servers. But my openstack is not working at all. On dashboard on every page I get errors saying "could not retrieve usage information", "could not retrieve volume information, "could not retrieve .....etc I spent hours and have discovered that juju has not done configuration correctly. I found that on cloud controller in nova.conf juju has added rabitmq vhost enrty, but that virtual host is not added in rabbitmq. Then how is its suppose to work? And on juju-gui canvas rabbimq is all green and is working fine, which in reality its not. I am really wondering if juju has really done correct configuration in all 24 servers now, I am getting the feeling that it would have been faster if I would have done openstack deployment manually instead of using juju. Why was the virtual host entry not added in rabbitmq? How should I solve this?

  Read the article

• Platform Builder: Disable the USB Driver Dialog

  - by Bruce Eitman

  For a long time, Windows CE developers and users have wanted to disable the USB Driver Dialog that is displayed when an unknown USB device is plugged into the host controller.   Of course the question is always why would you want to do such a thing? The simple answer is that there are USB devices that are needed, like printers, which expose multiple functions to the bus, like scanners and faxes, which no Windows CE driver exists to support.   So the printer quietly loads a driver, but then the other functions cause a dialog to be shown. One solution is to create a USB Class driver that loads by default if no other driver has been loaded. This driver just accepts anything that it sees and then does nothing with it. Starting with the Windows Embedded CE 6.0 R3 March QFE/update, the USB 2.0 driver has a registry value to disable the dialog: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients]       "DoNotPromptUser"=dword:0   Setting the DoNotPromptUser value to 1 disables the dialog. The default value is zero, so the driver continues to behave in the same way it always did unless you change this registry value.     Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• Getting a TV Capture Card working

  - by Benny Hallett

  I'm new to Linux, and am trying to get my Capture Card working on 11.04. The only command that I know to run to find out any information is lspci, which tells me that I have 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) I've looked at using Me TV, but haven't worked out how to configure it for my card, or what I need to do to get it running. I'm not fussed on what software I use to run the Capture Card, but I've currently got only Me TV installed. Edit: When I run tvtime, I get the following errors: videoinput: Cannot open capture device /dev/video0: No such file or directory mixer: find error: Success mixer: Can't open mixer default, mixer volume and mute unavailable. mixer: Can't open device default/Line, mixer volume and mute unavailable. Segmentation fault

  Read the article

• Implementing separation of concerns via MVC

  - by user2368481

  I'm creating a question to see if my understanding of MVC separation is correct, I haven't been able to find a clear answer anywhere online. So is this the right way to implement it (in Java): I would have 3 .java files, one each for Model, Controller, View. I would put all the classes related to Model in the Model.java like so: //Model.java { public class Model //class fields public Model(); public ModelClassA(); public ModelClassB(); public ModelClassC(); } With the ModelClasses being any class that I consider belonging to the Model. Is it correct to have the classes within the Model Class, as I have read that nested classes should be avoided where possible.

  Read the article

• WiFi not working in Ubuntu 13.10 with Ralink RT3290

  - by Francisco

  I have upgraded from Ubuntu 13.04 to Ubuntu 13.10 and now my WiFi doesn't work. It takes a lot of time to connect but when connected, connection is quickly lost again. In Ubuntu 13.04 worked fine. Here are some outputs: lspci | grep Wireless 01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod | grep rt2800 rt2800pci 18966 0 rt2800lib 95449 1 rt2800pci rt2x00pci 13287 1 rt2800pci rt2x00mmio 13661 1 rt2800pci rt2x00lib 56053 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio mac80211 634661 3 rt2x00lib,rt2x00pci,rt2800lib eeprom_93cx6 13344 1 rt2800pci crc_ccitt 12707 1 rt2800lib dmesg | grep rt2800 [ 19.959959] rt2800pci 0000:01:00.0: irq 46 for MSI/MSI-X modinfo rt2800pci | grep 3290 alias: pci:v00001814d00003290sv*sd*bc*sc*i*

  Read the article

• How important are SEO Friendly URLs [closed]

  - by nute

  Possible Duplicate: Is a URL with a query string better or worse for SEO then one without one? Currently, my URLs look something like http://mydomain.ext/question/5 where question is the Controller and 5 is the ID of the object or article retrieved. In theory I could spend some development time and some server resources to have URLs that would contain more information about the page loaded. However, seeing how websites like Youtube or many others just keep simple URLs with just an ID, I am asking, does it matter? It is worth it??

  Read the article

• HD flash video lagging on LG R400

  - by dhojgaard

  I'm installing Ubuntu on my friends laptop. An LG R400 with ATI Mobility Radeon X2300 graphics drivers. On Windows Vista which runs pretty slow the HD flash videos 1080p on Youtube vimeo and other places work with no problems, but on Ubuntu i can not really play videos above 480p Above that they are lagging. That annoys me because i know he will use them, and how am i supposed to convince him that Ubuntu is the way to go if it can not play the videos that windows vista can? Unity 3d is working fine so i think the graphics drivers is working, and when i download the hd videos and play as mp4 in vlc they also work fine. lspci -nn | grep VGA shows the following: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Mobility Radeon X2300 Hope that someone can help me convince my friend that Ubuntu is rocking!

  Read the article

• Single IBAction for multiple UIButtons versus single IBAction for single UIButton

  - by Miraaj

  While using story-board there are two different approaches which my team mates follow: Approach 1: To bind unique action with each button, ie: Done button - binded to - doneButtonAction Cancel button - binded to - cancelButtonAction OR Approach 2: To bind single action to multiple buttons, ie: Done button - binded to - commonButtonAction Cancel button - binded to - commonButtonAction Then in commonButtonAction they prefer to use switch case like this: - (IBAction)commonButtonAction:(id)sender { UIButton *button = (UIButton *)sender; switch (button.tag) { case 201: // done button [self doneButtonAction:sender]; break; case 202: // cancel button [self cancelButtonAction:sender]; break; default: break; } } - (void)cancelButtonAction:(id)sender { // no interesting stuff, simple dismiss of view :-( } - (void)doneButtonAction:(id)sender { // some interesting stuff ;-) } Reasoning which they give to follow approach 2 is - in each view controller during code walk through anyone can easily identify where to find code related to button actions. While others discard this idea because they say that adding an extra switch case is unnecessary and is not a common practice. What are your views?

  Read the article

• Email Content creation | Proper design

  - by Umesh Awasthi

  Working on an E commerce application where we need to send so many email to customer like Registration email Forget Password Order placed There are many other emails that can be sent, I already have emailService in place which is responsible for sending email and It needs an Email object, Everything is working find, but I am struck at one point and not sure how best this can be done. We need to create content so as it can be passed to emailService and not sure how to design this. For example, in Customer registration, I have a customerFacade which is working between Controller and ServiceLayer, I just want to delegate this Email Content creation work away from Facade layer and to make it more flexible. Currently I am creating Registration email content inside customerFacade and some how I am not liking this way, since that means for each email, I need to create content in respective Facade. What is best way to go or current approach is fine enough?

  Read the article

• Claims-based Identity in .NET 4.5 and Windows 8

  - by Your DisplayName here!

  There was not a ton of new information about WIF and related technologies at Build, but Samuel Devasahayam did a great talk about claims-based access control that contained some very interesting bits of information with regards to future directions. From his slides: Windows 8 Bring existing identity claims model into the Windows platform Domain controller issues groups & claims Claims (user and device) sourced from identity attributes in AD Claims delivered in Kerberos PAC NT Token has a new claims section Enhanced SDDL API’s to work with claims Enhanced user mode CheckAccess API’s to work with claims New ACL-UX Target audits with claims-based expressions WIF & .NET 4.5 WIF is in the box with .NET Framework 4.5 Every principal in .NET 4.5 is a ClaimsPrincipal ADFS 2.1 ADFS 2.1 is available now as a in-box server role in Windows 8 Adds support for issuing device claims from Kerberos ticket

  Read the article

• ADSI, SQL, Exchange Server 2010

  - by WernerCD

  Maybe I'm barking up the wrong tree... We have a Domain Controller "DC1". We have Exchange Server 2010 "Postman". Say I have an Address Book: And I add a few contacts to it: How then do I get the data from that contact via ADSI? Say I want the Job Title or CustomerID field that I filled out in the Contacts list? SELECT * FROM OPENQUERY(ADSI, 'SELECT EXTENSIONATTRIBUTE15 ,DISPLAYNAME ,GIVENNAME ,NAME ,SN ,SAMACCOUNTNAME FROM ''LDAP://DC=ATLANTICGENERAL,DC=ORG'' WHERE USERACCOUNTCONTROL=512 AND SAMACCOUNTTYPE=805306368 AND OBJECTCLASS=''PERSON'' AND OBJECTCLASS=''USER'' ORDER BY SAMACCOUNTTYPE ') How can I tie the Contact Card to an Active Directory User, so that I can edit either the AD account information OR the Exchange information and have them synced up?

  Read the article

< Previous Page | 203 204 205 206 207 208 209 210 211 212 213 214  | Next Page >