Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 208/421 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

  • esxi change MKS port

    - by Daniel Powell
    I need to connect to my home esxi box over the web however I cannot use the default port 902 for the console viewer due to firewall restrictions. Is there a way to change this port somewhere even if i can just do some nat and redirect any other port to that port? I've had a look around and when I try to connect to the esxi server in vSphere client I cant find anywhere I can specify the port. I know this is not the recommended way to do this but its a testing server and security is not an absolute must on this box. I also cannot setup a vpn to this box.

    Read the article

  • How can I permanently remove default root hints from a Server 2008 DNS server?

    - by TonyD
    My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

    Read the article

  • Is Steam for Mac effectively running as superuser?

    - by godDLL
    When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

    Read the article

  • Certain users cannot get to my server

    - by Zeno
    I am finding more and more users that report they cannot reach my server (website or services). Their tracert from that user looks like this: Tracing route to domain.com [*.*.*.255] over a maximum of 30 hops: 1 * * * Request timed out. The server is up and functional and every else reports it is fine. But there are various users who cannot get to it. I have no firewall or anything that would block anyone. Yes, the last part of the server IP is 255. Could this be causing it? http://www.dslreports.com/forum/r18539206-Last-octet-255-bug-on-Windows Or would a certain ISP be denying traffic to my server? Or something on their router level?

    Read the article

  • Can't telnet to SQL Server

    - by Thiago
    Hi there, I have an SQL Server running on a computer, and I'm trying to access it from another computer in the same local network (potentially VPN, since it's located in a datacenter). The point is that I can't even telnet to the port in which SQL Server is listening. And yes, SQL Server is working, since I can telnet to it from my workstation. I think it's something in the host, since there's no hop between the two computers, but I don't know how to troubleshoot this. Basically I get a connection failed, when I try to telnet. What can cause such problem, since apparently there's no firewall and the server is accepting connections from other computers? Thanks in advance

    Read the article

  • webserver running as nobody cannot resolve domain names

    - by jalal
    if i try to run the following: <?php echo file_get_contents("http://www.yahoo.com/index.html"); ?> through the web server I get a an "php_network_getaddresses: getaddrinfo" error. If I run the same file from the shell with: php test.php then I get the expected file output. This indicates to me that the 'nobody' user, which the webserver runs as, is not able to resolve the domain name, but the shell user can. Any ideas on how to fix this? Further info: CentOS 6, cPanel install, Apache, PHP running as dso. BTW, I've tried disabling the firewall to no effect.

    Read the article

  • Apache repeatedly crashing in OS X 10.6.5

    - by ltackett
    I want to be using the system default Apache available through Web Sharing, not MAMP. Other questions/answers related to similar problems have not helped. Initially, I had MAMP running, but I stopped it because I thought it might be causing a conflict, that didn't work. I also had an issue with apachectl related to the 10.6.5 update, which I fixed. Apachectl reports no syntax errors and seems to be working fine to start|stop|restart apache. Here are the errors that repeat. 12/29/10 11:53:28 AM Firewall[63] httpd is listening from ::ffff:0.0.0.0:80 proto=6 12/29/10 11:53:29 AM com.apple.launchd[1] (org.apache.httpd[8618]) Exited with exit code: 1 12/29/10 11:53:29 AM com.apple.launchd[1] (org.apache.httpd) Throttling respawn: Will start in 10 seconds This is not my area of expertise, so I hope that's enough info to go by.

    Read the article

  • Migrate OS Install to VMWare Virtual Machine

    - by rockinthesixstring
    I have Windows Server 2003 installed on my server. I'd really like to be running it via VMWare EXSi as a virtual machine, but I don't what to have to reconfigure the whole deal. Is there a relatively painless way to move it to a virtual machine? It will be staying on the same box with the exact same hardware... nothing changes. Thoughts?

    Read the article

  • small IIS web farm-create an Active Directory domain or no?

    - by brian b
    We have a smallish web farm of < 5 Windows 2008 servers. Some do data, most do IIS hosting. Is it a good/bad idea to set up a domain controller and put all in the same "production" domain? We want to avoid a world where we have to sync multiple admin passwords between the boxes (or share admin credentials among the team). Presumably, the DC would be just another VM, so hardware cost doesn't enter into the discussion.

    Read the article

  • Amazon EC2 SQL Server Connection

    - by cnxmax
    I have two instances running on Amazon AWS EC2. One is running MSSQL Server 2005, the other is running a web application. I CAN connect to the database in my app using a connection string that references the Public IP of my EC2 instance running SQL Server. I CANNOT connect from the web app server if I change the connection string to reference the database servers Private IP Address. But I can connect if I run that same code on the database server itself. I can remote desktop from the app server to the database server using the private IP. I have a feeling there is something in my SQL Sever configuration that is preventing this remote connection. I have remote connections enabled, I have it set to listen on all IP addresses. Any ideas? Other things I've done: - Added exceptions to Windows Firewall - Tried connecting to using EC2 DNS Names

    Read the article

  • Strategy to allow emergency access to colocation crew

    - by itsadok
    I'm setting up a server at a new colocation center half way around the world. They installed the OS for me and sent me the root password, so there's obviously a great amount of trust in them. However, I'm pretty sure I don't want them to have my root password on a regular basis. And anyway, I intend to only allow key-based login. On some cases, though, it might be useful to let their technical support log in through a physical terminal. For example, if I somehow mess up the firewall settings. Should I even bother worrying about that? Should I set up a sudoer account with a one-time password that will change if I ever use it? Is there a common strategy for handling something like this?

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • How to forward external port to internal port using plink

    - by user857990
    For a penetration test where I have shell access to a computer running an old Windows, I'd like to forward port 4450 to 127.0.0.1:445 because the firewall is blocking 445 externally. I'm stuck on the following: plink -L 4450:127.0.0.1:445 SSH-Server According to the documentation I've found, I'd have to specify a SSH-Server. But all documentation I've found just uses an SSH-Server in the same network. To forward it to a localhost port, that wouldn't help. Do I have to install an SSH-Server on that machine or are there other ways?

    Read the article

  • Howto print from dumb terminals with local print server and remote hosted RDP

    - by Matt
    We have essentially a remote office with about 5 dumb terminals. The terminals are connecting to our office directly over a wireless link. What I want to do is connect all their printers onto a print server. But since the remote office is not actually allowed to see our LAN (since they are actually another company) we don't want a full on open VPN tunnel set up. Naturally the RDP traffic passes through a firewall. Is there an easy way to set up the RDP server so that it can see a print server on a remote LAN?

    Read the article

  • How to know which operating system is suitable for my PC between 32/64-bit?

    - by avirk
    I'm using 32-bit operating system since I've my laptop. I've never used the 64-bit operating system so I'm much curious about this that if I upgrade to 64-bit still my pc will give me the same performance. However I've checked about my hardware from this question. I don't know about those result that what they are saying? So I'm here for little help to know that is there any performance issue after upgrading or not?

    Read the article

  • Apache can't connect to LDAP server

    - by jldugger
    I'm tying SVN to LDAPS by way of Apache. I've run openssl s_client --host $host --port 636 and received an SSL certificate, so it doesn't appear to be a firewall problem. I get the following warning: [Fri Apr 02 07:38:15 2010] [warn] [client <ip withheld>] [590] auth_ldap authenticate: user jldugger authentication failed; URI /internal-svn [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] "Can't contact LDAP server" is somewhere between vague and wrong. I'm at a loss on how to continue debugging this. Ideas?

    Read the article

  • Can't create a registry key under Eventlog and I am in administrators group

    - by Tony_Henrich
    I am troubleshooting an installer problem where it's giving an error writing to a registry key. So when I use the Registry Editor (regedit) to create the same key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog, I get a "Cannot create key: Error writing to the registry". Looking at the permissions, administrators have full access and I am a member of that group. I can create entries in other areas in the registry. When I try to take ownership, I see my name already listed. But then I get an error "Unable to set new owner on Eventlog. Insufficient system resources exist to complete the requested service". I tried after a new reboot. I turned off my firewall (Comodo). Why can't I create a new key when I am an admin and permissions indicate I have full control?

    Read the article

  • Windows Server 2008 Active Directory DNS setup

    - by Mister IT Guru
    I have to setup a small windows network inside my bigger linux/mac infrastructure. In order to get the windows clients logging onto the domain, I have had to make the DC their primary DNS server, which seems to have worked. I would much prefer to have one DNS server running on my network, or at least one authoritative server running on the network. I have a USG 200 router/firewall and I can configure some static records for DNS, but I an not sure what I need to put in order to get DNS and AD working together, and hints and tips appreciated.

    Read the article

  • Running dnsmasq as an authoritative DNS server

    - by Lord Loh.
    I am trying to implement a dynamic dns service for my computers. I have pointed h.lohray.com to my EC2 instance in the NS record of lohray.com and have installed dnsmasq on that system and have made sure to unblock the firewall port. For now, I have statistically added an entry on my /etc/hosts file. 129.118.19.163 i7.h.lohray.com however, i7.h.lohray.com does not resolve correctly with nslookup or dig :-( This is the only time I could have this resolved (online nslookup) - 50.19.103.190 is the IP address of the EC2 instance where dnsmasq is running. Where could I have gone wrong?

    Read the article

  • Setting up SVN+SSH for multiple users through one local user.

    - by Warlax
    Hi, I need to make our SVN repository accessible through the firewall - but without creating a local user for each potential external user. Instead, I would like to set-up SVN+SSH to route all external users through a single local user name. We would like each external user to authenticate with SSH the regular way but then treat their instance of svnserve as if they're all that single local user and possibly, control what parts of the repository each external user can access. I know that I will need to set my svnserve config according to the official guide. I tried, but the instructions are fuzzy and I am relatively a Linux n00b. What exactly are the steps to proceed? and how would you go about testing this? Thanks for your help.

    Read the article

  • Proxmox 31 + KVM routing + IP subnet + csf

    - by KeyJey
    We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

    Read the article

  • How not to send all traffic over SBS connection?

    - by Niels R.
    Hi, My girlfriend uses SBS Connection Manager to connect to her company's network. The problem is that the internet connection is überslow at work, so she wants to use the home internet connection to surf the web and use the SBS Connection to get to her work stuff. Normally with a VPN connection you just have to uncheck a box "Send all traffic over VPN connection" or "Use VPN as default gateway" or something like that. As I've never seen this SBS Connection Manager-thing before, I've no idea where to uncheck a similar box. (I've checked the properties of the connection in Network Connections, but it only has a few options about logging and firewall). Thanks for any help in advance! Kind regards, Niels R.

    Read the article

  • How do I combine static and dynamic DHCP leases on a Cisco router?

    - by Brad
    Basically, what I need is super similar to the unanswered cisco forum question below: https://supportforums.cisco.com/message/3139749#3139749 I have a Cisco 850 Series router. I have configured a DHCP pool for the 10.0.0.0/24 network. I have excluded 10.0.0.1 - 10.0.0.99 from the DHCP pool. I want to add a static DHCP pool for stuff and I want DHCP to statically assign them the addresses of my choice below 100. Actually, I don't care what addresses I statically assign. They can be anything in the pool for all I care, I just want it to work. Why are you doing this? Just statically assign the IPs on the devices! I don't want to do this because I have some laptop users. They could obviously only use that static IP here. This isn't a problem if they could be bothered to change any location setting or something. They can't. So it HAS to be DHCP. It also has to be static IPs because I need to forward ports to them. I know, I know, this is weird but it's an apartment LAN/WLAN so this isn't exactly a typical use case. Relevant sections of config below: ip dhcp excluded-address 10.0.0.1 10.0.0.99 ! ip dhcp pool Internal-net import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.1 domain-name 1770.local lease 7 ! ip dhcp pool static-pool import all origin file flash://staticmap default-router 10.0.0.1 domain-name 1770.local Contents of staticmap: *time* Aug 5 2010 09:00 AM *version* 2 !IP address Type Hardware address Lease expiration 10.0.0.100/24 1 001f.5b3e.d50a Infinite *end* You can see here I was trying addresses outside the excluded-address range to see if that would make any difference. My testing machine's MAC: mainframe:~ brad$ ifconfig en1 en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:3e:d5:0a What shows up in the DHCP binding table: basestar#show ip dhcp binding Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.0.0.112 0100.1f5b.3ed5.0a Aug 12 2010 10:06 AM Automatic What's up with the funny looking MAC in the DHCP binding table?? Is what I'm trying to accomplish basically impossible? Am I going about this the wrong way? All I want to to be able to port forward some ports to specific devices. The way I would do this with a consumer router is to do what I'm trying to do here; assign static DHCP to those devices then configure PAT for ports on those addresses.

    Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >