Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 211/421 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

  • Can't add printer on Windows XP

    - by SuperFurryToad
    I've added a HP 4250 printer to about half a dozen Windows XP PCs in our office without any problems whatsoever, but for some reason I haven't been able to add it to one particular PC today. I go through the Add Printer wizard to add a local printer attached to the PC, enter the new port number as a Standard TCP/IP Port, install the driver. At the end of the wizard I get the following error message: Full error message: "windows cannot connect to the printer. either the printer name was typed incorrectly, or the specified printer has lost its connection to the server." This doesn't make any sense as I am able to ping the printer from the PC. The print spooler is running, and any firewall software on the local PC is switched off.

    Read the article

  • TP-LINK modem can't connect to internet In automatic (PPPoE) mode

    - by Arash
    My TP-LINK-8901 modem does not connect to internet with "always on" (automatic) connection. I have to put it in bridge mode and make a connection in Windows to connect to internet. Also, there is no configuration problem. What I did: Reset modem Update firmware Is there any way to solve the problem myself, e.g. through hardware or software? I can't have it repaired because the warranty already expired.

    Read the article

  • Urgent SSH Local Port Redirection

    - by Salina Odelva
    Hi, everyone. I have a shell account but the admin has restricted ssh access to the server. The server is listening on 0.0.0.0:22 but the firewall blocks any incoming attempts to this port. He says he is doing maintenance but I don't believe him and I need to backup my stuff with ssh. My question is that: Is it possible to do this: Me (Wan IP) <- Hosting Server (tcp/8080) redirects to Hosting Server (tcp/22) I don't want to involve my own linux machine in this and I can only make use of ssh.. Thanks!!

    Read the article

  • datacenter network change control best practices

    - by jpolache
    I have been tasked with compiling a list of possible network equipment changes at a data center. The task includes tagging which changes need change control and which don't. Does anyone know of a "best practices" list that I can start from? The methods for doing change control at this data center are well established. The list would be of specific configuration items that should or should not be included in the change control process, of example; static route entries switch port assignments firewall rule additions/changes etc.

    Read the article

  • windows service log on as user a/c on different PC on same workgroup

    - by maruti
    trying to run a service (logon as admin@PC2) from PC1, when both are in work-group fails. why could this happen? OS is win-2003 and please let me know if any windows remote services have to be turned on or firewall configuration? does having PC's on same workgroup help? let me clarify the question: I am unable to see other computers from "Services Logon Tab select User" Object types available are only "users, built in security principals" Location is only local computer. But this is available from mmc console..add snap in how can this be available on services control panel?

    Read the article

  • Can a Windows 2003 Active Directory server act as a NTP server?

    - by Rob Nicholson
    Within our LAN, there are two Windows 2003 servers with the Active Directory role. Both these servers have the time service configured to query NTP servers on the internet for the accurate time. That works fine. I've just installed XenServer v5.6 and it's asked me for the IP address of an NTP server. Without tweaking the firewall, I cannot configure this server to reference an internet based NTP server. But can I configure it to use the IP address of the internal AD servers, i.e. do AD servers also act as NTP servers to other computers? Thanks, Rob.

    Read the article

  • What setting can cause a monitor to flicker under X11?

    - by BCS
    I've been dinking with the xorg.conf file on my system and now when I try to start X I get a flickering effect and no usable image. I think (and this is just a guess) that it's a settings out of bound error of some kind but I don't know what setting. I'm almost completely sure that the hardware is good given that everything is brand new.and works just fine in text mode. Any ideas?

    Read the article

  • Can I set up a 2nd home wireless router, with router2 connecting to the internet through a desktop which is wirelessly connected to router1?

    - by gil b.
    Hi, I apologize for the crudeness of my MSPaint drawing, but please view my diagram of what I'd like to accomplish: Proposed home network architecture Currently, all devices are connected to 1 wireless router. I would like to make my own subnet, with a box in-between my subnet and the shared wireless router, so that I can learn about IDS, traffic analysis, etc. I was also given a cisco PIX firewall to play around with, and it'd be an added bonus if I could incorporate that into my network. The reason for this proposed architecture is so that I can monitor all MY traffic, without seeing anything going on with my roommates' traffic. my MAIN Question is, is it possible to have my desktop connect to the wireless router with internet via wireless card AND share that connection via the ethernet card, hooked to wireless router 2? cable modem - wireless router - desktop pc connected wirelessly - wireless router 2 getting internet from wired connection to desktop pc - laptops connected wirelessly The PIX can be left out for now, but I'm wondering if it could eventually be incorporated? THANKS!

    Read the article

  • Get OWA and ActiveSync working on server using HTTP redirect in IIS 7

    - by eric
    We have two servers on our LAN. One is a Windows 2003 Server domain controller running Exchange 2003. The other is a stand-alone Windows 2008 server running IIS 7. Our company website runs on the IIS 7 (2008) server, so the firewall forwards port 80 to this. How can I get OWA and ActiveSync to work with this setup? And without using SSL. I have tried setting up a website on the IIS 7 box (mail.ourdomain.com) and using HTTP redirect to point to http://mailserver/exchange, but this doesn't work. Do we have to purchase an SSL certificate for this to work?

    Read the article

  • Improving server security [closed]

    - by Vicenç Gascó
    I've been developing webapps for a while ... and I always had a sysadmin which made the environment perfect to run my apps with no worries. But now I am starting a project on myself, and I need to set up a server, knowing near to nothing about it. All I need to do is just have a Linux, with a webserver (I usually used Apache), PHP and MySQL. I'll also need SSH, SSL to run https:// and FTP to transfer files. I know how to install almost everything (need advice about SSL) with Ubuntu Server, but I am concerned about the security topic ... say: firewall, open/closed ports, php security, etc ... Where can I found a good guide covering this topics? Everything else in the server... I don't need it, and I wanna know how to remove it, to avoid resources consumption. Final note: I'll be running the webapp at amazon-ec2 or rackspace cloud servers. Thanks in advance!!

    Read the article

  • Windows system drive letter changed after repair install

    - by taffer
    yesterday I did a repair install, because Windows froze on welcome screen after resizing its partition on a dual boot system. corresponding question Everything worked fine so far, but now I am facing another challenge: The Windows drive letter changed from G: to C:, so that most programs, including drivers, firewall and virus scanner do not work anymore. I tried to reinstall the virus scanner, but the uninstaller said, that drive G: is not available. What to do now, to get all programs running again? Is it possible, to rename C: to G: or will that mess up my system?

    Read the article

  • OS X 10.7.5 - telnet: connect to address 10.0.0.12: Operation not permitted

    - by user2169619
    I have troubles to connect from macos to reach windows shares and I hit some general problem with my macos. When I try to telnet to 445 port to my windows share server the macos throws "Operation not permitted". I have no firewall rule and I'm not able to google anything. sh-3.2# telnet 10.0.0.12 445 Trying 10.0.0.12... telnet: connect to address 10.0.0.12: Operation not permitted telnet: Unable to connect to remote host Any idea what can be the reason?

    Read the article

  • NLB RPC server is unavailable on the specified computer

    - by Robin Weston
    Hi guys, Firstly, I'll admit that my networking knowledge is limited so as people request more information I'll update this question accordingly. I am trying to create a NLB Cluster across 2 Windows Server 2008 Web Servers. Neither of the machines are members of a domain, and both have 2 NICs (one for processing external web traffic, and one for communicating internally). I have installed NLB on both machines, and have created a cluster on Host A and added itself to it. However, when I try and add Host B (using the address from the external NIC) I get the following error : "The RPC server is unavailable on the specified computer". On Host B I can see that the RPC service is running fine. I can also ping and RDP from Host A to Host B with no problems either. I have disabled the windows firewall on both machines but that had no effect

    Read the article

  • Why aren't Heroku syslog drains logging to rsyslogd?

    - by Benjamin Oakes
    I'm having a problem using syslog drains as described in https://devcenter.heroku.com/articles/logging. To summarize, I have an Ubuntu 10.04 instance on EC2 that is running rsyslogd. I've also set up the security groups as they describe, and added a syslog drain using a command like heroku drains:add syslog://host1.example.com:514. I can send messages from the Heroku console to my rsyslogd instance via nc. I see them appear in the log file, so I know there isn't a firewall/security group issue.  However, Heroku does not seem to be forwarding log messages to the server that heroku drains lists. I would expect to see HTTP requests, Rails messages, etc. Is there something else I can try to figure this out? I'm new to rsyslogd, so I could easily be missing something.

    Read the article

  • Activesync/OWA Desktop Client

    - by prestomation
    At my company we have Exchange 2k3 with OWA being public, serving up Activesync and webmail. There is no pop3 or imap support from our admins. Outlook 2k3's RPC over HTTP is also disabled Is there a desktop client that can connect to Activesync or OWA? If my ipod touch can connect to activesync, why can't my pc? I'd preferably like a linux daemon that could simply forward emails to my gmail address, but I guess I'll take what I can get. Thanks EDIT: In case it was not clear, our Exchange server is hidden completely behind a firewall, and a second exchange server has only activesync and https ports opened to the world.

    Read the article

  • Is there an apache module to slow down site scans?

    - by florin
    I am administering a few web servers. Each night, random hosts from the Internet are probing them for various vulnerabilities in php, phpadmin, horde, mysqladmin, etc. Is there a way (apache plugin?) to slow down the rate of attack? For SSH, I have a rate limiting rule on the firewall, which does not allow more than three connections per minute. But I don't want to rate limit all HTTP access, only the access that returns 404s. Is there such an apache module?

    Read the article

  • Which linux for raid/fileserver?

    - by Tronic
    hi, i will get an ibm x3500 in the next days and wondered which linux i should use. i tend to use ubuntu 10.04 server, haven't heard anything bad about it and i'm a big debian fan. there will be a raid 5 powered by the ibm hardware raid controller (don't know which one). is it possible to monitor and manage it wit hthe ubuntu 10.04 server distro? or should i go another way and choose something like redhat (haven't used it though...)? thanks in advance regards

    Read the article

  • HP ProBook 4540s CD/DVD Drive cannot Read Disks

    - by DavidB
    I seem to have a problem with the CD/DVD drive on my HP ProBook 4540s laptop. I cannot get it to read any disks. Normally, I would say that this is a hardware issue, but whenever I put a disk that previously could be read in the drive, it starts to make noise like it is trying to to read the disk but cannot and AnyDVD HD seems to be able to retrieve disk information with some struggle. Any ideas on what the problem could be?

    Read the article

  • middle click works only once

    - by Ivan Peevski
    Just recently I'm having problems with middle click. After a reboot, it works the first time I use it, but then it doesn't work after that. As far as I've investigated, that's the same on Linux and Windows. The mouse is Reaper ZMS-1000. To me it sounds like a hardware issue, but it's strange that it works after a reboot every time just for one time. Any suggestions?

    Read the article

  • cannot access my own computer through My Network Places

    - by vgv8
    My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

    Read the article

  • Apache on Win32: Slow Transfers of single, static files in HTTP, fast in HTTPS

    - by Michael Lackner
    I have a weird problem with Apache 2.2.15 on Windows 2000 Server SP4. Basically, I am trying to serve larger static files, images, videos etc. The download seems to be capped at around 550kB/s even over 100Mbit LAN. I tried other protocols (FTP/FTPS/FTP+ES/SCP/SMB), and they are all in the multi-megabyte range. The strangest thing is that, when using Apache with HTTPS instead of HTTP, it serves very fast, around 2.7MByte/s! I also tried the AnalogX SimpleWWW server just to test the plain HTTP speed of it, and it gave me a healthy 3.3Mbyte/s. I am at a total loss here. I searched the web, and tried to change the following Apache configuration directives in httpd.conf, one at a time, mostly to no avail at all: SendBufferSize 1048576 #(tried multiples of that too, up to 100Mbytes) EnableSendfile Off #(minor performance boost) EnableMMAP Off Win32DisableAcceptEx HostnameLookups Off #(default) I also tried to tune the following registry parameters, setting their values to 4194304 in decimal (they are REG_DWORD), and rebooting afterwards: HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultReceiveWindow HKLM\SYSTEM\CurrentControlSet\Services\AFD\Parameters\DefaultSendWindow Additionally, I tried to install mod_bw, which sets the event timer precision to 1ms, and allows for bandwidth throttling. According to some people it boosts static file serving performance when set to unlimited bandwidth for everybody. Unfortunately, it did nothing for me. So: AnalogX HTTP: 3300kB/s Gene6 FTPD, plain: 3500kB/s Gene6 FTPD, Implicit and Explicit SSL, AES256 Cipher: 1800-2000kB/s freeSSHD: 1100kB/s SMB shared folder: about 3000kB/s Apache HTTP, plain: 550kB/s Apache HTTPS: 2700kB/s Clients that were used in the bandwidth testing: Internet Explorer 8 (HTTP, HTTPS) Firefox 8 (HTTP, HTTPS) Chrome 13 (HTTP, HTTPS) Opera 11.60 (HTTP, HTTPS) wget under CygWin (HTTP, HTTPS) FileZilla (FTP, FTPS, FTP+ES, SFTP) Windows Explorer (SMB) Generally, transfer speeds are not too high, but that's because the server machine is an old quad Pentium Pro 200MHz machine with 2GB RAM. However, I would like Apache to serve at at least 2Mbyte/s instead of 550kB/s, and that already works with HTTPS easily, so I fail to see why plain HTTP is so crippled. I am using a Kerio Winroute Firewall, but no Throttling and no special filters peeking into HTTP traffic, just the plain Firewall functionality for blocking/allowing connections. The Apache error.log (Loglevel info) shows no warnings, no errors. Also nothing strange to be seen in access.log. I have already stripped down my httpd.conf to the bare minimum just to make sure nothing is interfering, but that didn't help either. If you have any idea, help would be greatly appreciated, since I am totally out of ideas! Thanks! Edit: I have now tried a newer Apache 2.2.21 to see if it makes any difference. However, the behaviour is exactly the same. Edit 2: KM01 has requested a sniff on the HTTP headers, so here comes the LiveHTTPHeaders output (an extension to Firefox). The Output is generated on downloading a single file called "elephantsdream_source.264", which is an H.264/AVC elementary video stream under an Open Source license. I have taken the freedom to edit the URL, removing folders and changing the actual servers domain name to www.mydomain.com. Here it is: LiveHTTPHeaders, Plain HTTP: http://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:55:16 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain LiveHTTPHeaders, HTTPS: https://www.mydomain.com/elephantsdream_source.264 GET /elephantsdream_source.264 HTTP/1.1 Host: www.mydomain.com User-Agent: Mozilla/5.0 (Windows NT 5.2; WOW64; rv:6.0.2) Gecko/20100101 Firefox/6.0.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: de-de,de;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip, deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Connection: keep-alive HTTP/1.1 200 OK Date: Wed, 21 Dec 2011 20:56:57 GMT Server: Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/0.9.8r PHP/5.2.17 Last-Modified: Thu, 28 Oct 2010 20:20:09 GMT Etag: "c000000013fa5-29cf10e9-493b311889d3c" Accept-Ranges: bytes Content-Length: 701436137 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/plain

    Read the article

  • SYSTEM hive of the register is causing computer to BSOD on boot

    - by FernandoSBS
    After some work on my computer, perhaps some updates installs, it didn't boot anymore. BSOD on windows logo loading. After some research I've found out that if I replace the SYSTEM hive of the register with the last backup it boots ok, but of course goes back to an old stage of machine setup. So my question is: where does register stores hardware and/or updates/software that loads in the machine boot, so that I can check which program is producing that BSOD and disable it? System is Win 7 64 bits SP1

    Read the article

  • IPTables masquerading with one NIC

    - by Tuinslak
    Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

    Read the article

  • mod_proxy failing as forward proxy in simple configuration

    - by Stabledog
    (On Mac OS X 10.6, Apache 2.2.11) Following the oft-repeated googled advice, I've set up mod_proxy on my Mac to act as a forward proxy for http requests. My httpd.conf contains this: <IfModule mod_proxy> ProxyRequests On ProxyVia On <Proxy *> Allow from all </Proxy> (Yes, I realize that's not ideal, but I'm behind a firewall trying to figure out why the thing doesn't work at all) So, when I point my browser's proxy settings to the local server (ip_address:80), here's what happens: I browse to http://www.cnn.com I see via sniffer that this is sent to Apache on the Mac Apache responds with its default home page ("It works!" is all this page says) So... Apache is not doing as expected -- it is not forwarding my browser's request out onto the Internet to cnn. Nothing in the logfile indicates an error or problem, and Apache returns a 200 header to the browser. Clearly there is some very basic configuration step I'm not understanding... but what?

    Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >