Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 208/260 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• How do I get a 300Mbps connection over 802.11n?

  - by Daniel Schaffer

  I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

  Read the article

• Using wifi router as bridge to increase signal?

  - by overtherainbow

  A friend of mine lives in an appartment building whose structure is such that wifi signal is very weak. Even a USB key won't work. I was thinking of buying an entry-level wifi router and reconfigure it as a bridge to act as repeater. Would that increase the chance of getting a good signal, or I shouldn't bother? If experience shows that it does improve things significantly, is their another router I should look at besides the Linux-based Linksys models? Thank you.

  Read the article

• How to create direct RS232 (PPP) connection from Windows 7

  - by Jonny Wright

  I'm trying to create a direct connection to a hardware device via RS232 serial connection. Am using a USB to Serial adapter and works fine in WinXP but the option seems to have disappeared in Win7. This is the only connection option available for this piece of hardware so I have no choice. Currently have a netbook with WinXP installed purely for interfacing with this hardware. In XP it was just a matter of creating an "Advanced connection" and then "Directly to another computer" etc, I can find no such options in Win7.

  Read the article

• Transferring analog media (VHS casettes, vinyl records) to PC

  - by Javier Badia

  I have some VHSs and vinyl records which I'd like to convert to DVDs and CDs, respectively. I have a couple of questions about how to hook the devices up to the computer. I've seen some RCA-to-USB cables on the Internet like this one. Will those work for connecting the VCR to the computer? And what program would I use to take that and save it as a video file? Can I connect the phonograph directly to the Line In port in my PC or do I need some amplifier or something in the middle? I'm using Windows 7 x64, if it matters.

  Read the article

• One hard drive missing after converting from ide to ahci

  - by user700859

  I have two 500GB SATA HDD in my desktop running XP. After converting from IDE to AHCI, the HDD I use to store data can no longer be accessed from XP. It shows only the first partition as 150GB, and data type is listed as RAW. However, if I boot into a live linux environment or if I pull that HDD out and connect it using USB, I can still get to all my files again. So I completely formatted the HDD into one single partition. But XP still does not recognize it. It still shows the disk as the 150GB partition and data type is still RAW. What's going on and how do I fix this? Thanks in advance.

  Read the article

• Is Windows Server 2003 on 96 MB possible?

  - by Nifle

  I have an old laptop, a Pentium II with 96 MB. I have had Windows 2000 on it for ages, it was slow but usable. But now I have to upgrade since I can't get my USB-wlan drivers to install (the old PCMCIA network card broke). I would prefer to install Windows XP but I have no spare licence, but I do have a Windows Server 2003 licence. Do you think it's possible (and usable) to squeeze in 2003 on this computer? Edit: Unfortunately 2003 simply refuses to install on the laptop. It hangs with an error message (paraphrased) 2003 has detected a problem with your computer and has halted the installation to prevent damage. And then some error codes This happens very early in the installation while it's copying the installation files just after I accepted the licence. So I give up for now.

  Read the article

• I found a some bad sectors with chkdsk. Should I be worried?

  - by mottalrd

  Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

  Read the article

• How do I catalog files on several external hard drives that I want to store off-line? OSX

  - by raudi

  My partner, an artist, has more than 10 external hardisks both USB and firewire and every 2-3 months a new one has to be added (She's working with videos and pictures) currently its 10TB and growing so too much for a affordable NAS. Right now the files are not indexed and I think can not be searched with spotlight because not all drives can be connected at the same time. So if she wants to search for a file, she has to guess which disk/disks (based mostly on the date) and then search several drives. Now I'm looking for a solution to index/catalog the drives, something like GentibusCD Cathy Disclib (all these solutions are unfortunately Windows only) Is there any software for OSX that will catalog all the hard drives, so she can search the catalog, find the files, and get the ID of the disk / disk name that has the content? Preferably something with a GUI so my partner can also use it easily Preferably with Thumbnails for pictures/videos (But even an equivalent to "tree /F /A" would be better than nothing)

  Read the article

• How to reinstall OS X 10.8 without internet?

  - by Sam

  I had a crash on my Macbook Air MD231 - Mid 2012, and my system won't boot, and unfortunately my friend erase my partition from disk utility. Now I have three question 1)my internet speed is very low, for re-installing I have to download all of the OS X 10.8 from internet? or I can download it and install it via USB port?(how??) 2)I have to select this option ? "re-install OS X" , and what about size of that? (for example 4.2 Gb) 3)after installing , is there anyway to restore my dada? unfortunately I have not any backup right now, after I turning my Mac on, it's automatically going to repair mode... thnx for your kind

  Read the article

• Bluetooth Connectivity that an error

  - by eka anggraini

  I have a bluetooth USB, every time I enter the bluetooth, bluetooth is active only a few seconds, after which it can not be used again In 'devices and printer' there is still a bluetooth but if you want to save the settings it can not, there are error message or bluetooth is revoked. I am using windows 7, whereas if use Windows XP smoothly no problems. This not only happens on my computer alone, my friend who has a build-in bluetooth also experienced the same thing with the same OS. Is there a patch / fix / update for its Windows? I've been brain-tweaking drivers for all but still can not.

  Read the article

• Netgear genie says my Internet is off, while Windows claims I am connected

  - by Manu

  I'm connected via wifi to my ISP's router/modem. While Windows says that I'm always connected, I keep getting messages from Netgear Genie that I've lost contact to the Internet, and I cannot access webpages until it comes back. There are two other computers in the house, one connected to the router via ethernet, the other via wifi, both seem to have no such problems. I've wondered if Netgear genie itself was the problem, but I am regularly disconnected even if I uninstall it. And I'd rather have it since it accurently tells me if I'm connected or not. Why does windows says I'm online if I can't access any online game, or website ? Is "netgear genie" the problem ? I've removed the connection, recreated it, I've even copied the settings to a usb key from the computer that has wifi access.

  Read the article

• Too Many Files In Debian Linux Folder?

  - by Dave Potts

  I've been using an external USB drive on a Debian server for backup. The drive is formatted as NTFS and mounted with ntsfmount. This was working fine, but I was filling up a directory with lots of files. Eventually the backup failed. When I then tried to look at the directory using ls it reported: ls: reading directory .: Numerical result out of range Looking in syslog, I also saw this: Sep 23 07:35:31 tosh ntfsmount[28040]: Failed to read index block: Numerical result out of range. Is this simply that I've reached the upper limit of number of files in a directory? If so, is there any way to extend the number of allowed files?

  Read the article

• Is it possible to use multi keyboards with multi keyboard layouts simultaneously?

  - by mono

  Considering to switch to dvorak layout, but this terminal is used by multi users as the same user account. It is unacceptable to ask all people to switch layout, plus it is hard to use dvorak layout with a keyboard qwerty-ly labeled. But there are spare (USB,qwerty) keyboards, so if I plug another keyboard in and be able to use multi layouts on different psyical keyboard simultaneously (I will rearrange letters on keys), the problem get solved. solution for either windows or linux is fine. anyway thanks all.

  Read the article

• Cisco Router 1921

  - by mytempfw

  I'm very new in networking and I'm trying to setup my network as follow [ISP Modem/Router/Switch] + --- + {fxp0} [Linux Firewall] {fxp1} + --- + {??} [Cisco Router 1921] {GE 0/0} + --- + [Cisco Switch] + ... Servers {GE 0/1} + --- + [Cisco Switch] + ... Servers My questions are, Since I'm using both GE 0/0 and GE 0/1 ports to connect to switch, how can I connect my Linux Firewall (Port fxp1) to my Cisco Router? I know the USB and Console port are for configuration, can I use AUX port to connect my firewall (if so is it consider a right way)? Is my setup is right? if not can someone please explain to me to do the setup in right way. Link to the picture of my router: Cisco Router 1921 Thanks

  Read the article

• Can I fork a copy command on ReadyNAS SSH?

  - by DanyW

  I have a ReadyNAS 102 with a couple of USB drives attached. There were times I wanted to copy files between volumes. Unfortunately I have also accidentally cut off copying process by accidentally closing off the SSH sessions. Is it possible for me to fork a cp or mv process on SSH? As it currently stands when I close the SSH session, be it by accidentally closing the terminal window or closing my laptop screen and putting it to sleep, the copy process stops. Can I do something like cp ~/blah /some/other/path & and have the process keep running to completion in the background even if the SSH session is terminated?

  Read the article

• What tool can I use to definitely kill a process on Windows?

  - by Moak

  Can anyone recommend an application (preferably usb-portable that doesn't require setup) That really kills a process immediately in windows XP? I ask this because often when I need to use the XP task manager it seems to want to go about it "the polite way" and sometimes crashed programs don't quit or take a minute to shut down. I need a real stone cold killer, not a pushover-could-you-please-quit-now-no?-ok-sorry-program Edit I'm sorry if it wasn't clear previously but I did mean the situation when even the "End process" command in Process tab of the task manager doesn't kill a program, however one of the answers did point me to the "End Process Tree" command which I've never noticed (when right clicking on the process)

  Read the article

• How do I share a home printer under Windows if the computer is part of a domain?

  - by Sorin Sbarnea

  I do have my work laptop at home and I want to share an USB printer in order to be able to print to it from my MacBook. Currently Windows 7 is refusing to share the printer because the computer is part of a domain and it tells me that I need to join a homegroup in order to be able to do that. Also it tells me that he cannot create this homegroup and this group has to be create by another Windows 7 computer from my network. As you can imagine I do have only one Windows computer on my home network. How can I solve this problem?

  Read the article

• How to authorize standard users to install drivers

  - by Dr I

  I'm currently looking for a way to autorize my non administrators users to perform an installation of drivers. Here is the speech: All my users are standard users, they got a VirtualBox Hypervisor if they need the administrator rights. But if they put an USB device on the local machine and try to redirect the device to the Virtual Machine, Windows ask for some Administrator rights. I've try to set up those GPO: -Allow standard users to install drivers. -Install WHQL Drivers: Allow Silently. I don't know how to do this.

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. What might be the problem?

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• Deleted entire harddisk. Now my laptop won't boot anything and stuck at grub rescue

  - by Jahan

  My laptop is Dell Inspiron N4030. I used to use Ubuntu 12.04 and it was on the entire hard drive. I tried to install windows 7 but my laptop couldn't install it. So, I decided to delete the entire hard drive and do a fresh install of Windows 7. But after deletion I immediately removed the gparted live usb which I was using to delete the partitions of my hard drive. And then tried booting from windows 7 cd, didn't work, tried ubuntu live cd, didn't work, tried hiren's boot cd, didn't work, tried super grub disk, didn't work. Probably I'm not doing it right. Help needed badly.

  Read the article

• PDAnet on Android IP on PC is not public IP. Where does the NAT take place, PDAnet or Verizon?

  - by lcbrevard

  When using PDAnet on a PC (Win7 ultimate) to USB tether a Motorola Droid on Verizon 3G the IP address of the PC appears to be public - 64.245.171.115 (64-245-171-115.pools.spcsdns.net) - but connections show as coming from another public IP - 97.14.69.212 (212-sub-97.14.69.myvzw.com). Someone is performing Network Address Translation - either PDAnet or within the Verizon 3G network. Can someone tell me who is doing the NAT? Is it PDAnet or is it at Verizon? Is there any possibility of setting up port forwarding, such that connections to the public IP 97.14.69.212 (212-sub-97.14.69.myvzw.com) are forward to the PC? We are testing a network protocol that requires either a true public IP or forwarding a range of ports from the public Internet to the system on which the software runs (actually Linux hosted by VMware Player or Workstation on a PC running Windows).

  Read the article

• How can I share data from a Samsung Wave Mobile phone with the Mac OS?

  - by M. Bedi

  This is driving me up the wall just a bit. I have a new Samsung Wave mobile phone. It is running the Bada OS. The mobile phone does not come with anyone software for the Mac. The Kies desktop interface is only available for Windows. I did try installing the Kies software in a VM with Parallels 5 but it did not detect the phone connected via USB. I tried using Bluetooth file exchange on the Mac; it lets me browse the file system on the Wave phone but not actually see any of the media files; I just get empty directory views. But I am able to access files using media sharing with the Wave phone and my PS3. So what would be a Mac desks top app that can be used a media sharing browser?

  Read the article

• Internet Connection Dying after some time

  - by Rahul

  I'm using BSNL 3G USB Datacard(BSNL is a ISP in India). After connecting to internet, while browsing in browser, the connection is dying. So after disconnecting & connecting back, it works proper for some time & the same problem repeats. But if I'm downloading any movie or some file through uTorrent, the connection is not dying. I'm experiencing this problem in Vista & also in Ubuntu. Help me with this please. Thank you.

  Read the article

• CentOS, CUPS - printer managment

  - by HTF

  I'm using CentOS 6.3, and trying to get a printer PIXMA iP4950 to work. The printer is attached via USB. I've downloaded and installed the drivers from the Cannon website, and have the printer installed in CUPS. However, when I print anything (even the test page), the job is completed successfully (according to CUPS-log), but the printer does not print a thing. I don't know how to debug this. Have tried to change logging to debug, but I don't see any errors in the error_log and the access_log says: Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Canon_iP4900_series) from localhost Please note that I was able to print on another CentOS machine however with GNOME Desktop.

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >