Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 213/260 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• ubuntu boots into gnu grub 1.99

  - by greenish

  I've tried set root=(hd0,2) chainloader +1 boot set root=(hd0,2) linux /boot/vmlinuz... and the loopback (loop0) /ubuntu/disks/root.disk command etc. When I try the boot command it tells me there's no kernel and when I boot Win7 (it's a dual boot) the root.disk says 0kb. nothing boots from the live usb I've made and I've tried to use programs to mount the partitions to no effect - they only show me what's on my windows file drives. I've got some really important docs on the linux harddrive I need to get to. any ideas?

  Read the article

• Installing grub2 on ubutntu with software raid mirroring

  - by Marko

  Hi guys, Can someone help me out on this? I accidentally installed grub on usb flash drive during ubuntu server installation. Now I cant boot system without drive attached to server. I want to install grub on hard drive with grub-install but i don't know what to set as location for boot loader? my fstab looks like this: file system mount point type options dump pass proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/pdc_jdbeghhjg1 / ext4 errors=remount-ro 0 1 /dev/mapper/pdc_jdbeghhjg5 none swap sw 0 0 and partition tables for hard drives as this: Device Boot Start End Blocks Id System /dev/sda1 2048 1215662079 607830016 83 Linux /dev/sda2 1215664126 1249998847 17167361 5 Extended /dev/sda5 1215664128 1249998847 17167360 82 Linux swap / Solaris Device Boot Start End Blocks Id System /dev/sdb1 1 75672 607830016 83 Linux /dev/sdb2 75672 77809 17167361 5 Extended /dev/sdb5 75672 77809 17167360 82 Linux swap / Solaris ?

  Read the article

• SATA Devices not showing up when in UEFI mode

  - by Dan Barzilay

  I'm trying to install Windows and the bios should be set to UEFI mode. The problem is that all SATA devices aren't showing up (shows as if there aren't any) so I can't boot from the installation CD (it's just not there). The weird thing is that when set to LEGACY mode they all show up.. SATA mode is set to AHCI and I'm on Lenovo Y510P. I have a Linux OS installed that is accessible only when BIOS is in LEGACY mode (otherwise the hard drive it's on is not available) I also tried reseting the BIOS settings which didn't help.. Comment please if more details needed Extra details: Computer model: Lenovo IdeaPad Y510P (not overcloacked) Installed Linux OS version: Linux 3.7-trunk-amd64 x86_64 Trying to install Windows: Windows 7 Ultimate 64bit BIOS Information: Vendor: LENOVO Version: 74CN26WW(V1.07) Update: Using user1608638 answer and suggestion of using the USB flash drive as the boot device instead of the CD/DVD method I succeeded in installing Windows 7! (Thanks alot user1608638)

  Read the article

• Windows Reformatting

  - by Shimz187

  I recently began formatting a hard drive via USB extenal drive when the power went off. When i powered it up again and connected the drive the drives dont show up under my computer. When i go to disk management, i see the drive but now it says unallocated space. The drive was initialy partitioned into 2 drives. I cant see both drives now. Tried running GetDataBack NTFS recovery tool and it only comes up with errors. There seem to be no information on the drive from the data recovery utility. I know the information is there but how do i find it. HELP!!!!

  Read the article

• PNY ExpressCard SATA II 2-port card - drivers?

  - by stewartwb

  I bought a couple of PNY eSATA cards for notebook computers, model P-NSA2-EC-RF. I mistakenly thought that they would be a bit more plug-and-play, like cards that supply USB or Firewire ports. They did not ship with the Driver CD, and the drivers I found on the PNY web site didn't work. I've emailed their support group, but we all know how likely it is that they will respond before the end of the decade. Does anyone have a driver disc handy for this model card, or know where I might download a driver ISO? (Dell XPS M1330 laptop running Windows 7 x64 and sometimes Windows 7 x86)

  Read the article

• Is it possible to remove buzzing from headphones which occurs only when scrolling / window redrawing?

  - by Billy ONeal

  Whenever a lot of drawing is happening on my laptop a buzzing noise is emitted by the sound hardware, which is clearly audible with headphones (similar to this question or this one). I've tried both the headphone jack on the laptop itself, and also on the dock. I've used other laptops and they all seem to have similar problems here, which leads me to believe this is more a function of relatively low quality laptop sound hardware than any fault with the headphones or this laptop in particular. I'm curious if there's some piece of hardware I might use to eliminate the buzzing. For instance, would an external USB sound device fix the problem or is it likely subject to the same kinds of issues? Would a simple filter/choke on the headphone cord itself possibly help? Or is one simply stuck with poor quality audio from laptops period?

  Read the article

• How to run long time process on Udev event?

  - by neclude

  (sorry for my bad english) I want run ppp connection when my usb modem is connect. so i use next udev rule: ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="16d8",\ RUN+="/usr/local/bin/newPPP.sh $env{DEVNAME}" (my modem appear in /dev as ttyACM0) newPPP.sh: #!/bin/bash /usr/bin/pon prov $1 >/dev/null 2>&1 & Problem: udev event fire, newPPP.sh running, BUT newPPP.sh process will be killed after ~4-5s. ppp not have time to connect. (in it params is timeout 10s for dial up). How can i run long time process, that will not be killed? (I was try nohup. It don't work too.) System: Arch Linux

  Read the article

• How to take backup mirror copies of C: drive?

  - by metal gear solid

  I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

  Read the article

• VMware Fusion on MacBook Pro running Vista, not working after installing a wireless card

  - by Shelley

  A tech friend installed VMware on my Mac so I could use my Windows programs as well. It worked great until I inserted my Sierra 881 USB wireless card while in VMware trying to get to the internet while on the road. It worked briefly, then the AT&T Communication manager won't respond when you click on the icon, I can't open Network and Sharing center, I can't sync my palm - shows it can't connect. Looks like it messed up several things, along with not being able to connect to the internet while in windows. This wireless cards works directly from the Mac - but I need internet while in Windows for some work I am doing. How do I uninstall this - when I try - it just gives me an endless reloading circle - not doing anything. I really need to sync my palm and get back to the way it was. I don't know much about VMware at all and I don't have access to my friend right now to get help.

  Read the article

• Option and command keys in Mac OS X are swapped and keyboard preferences do not set them back.

  - by bikesandcode

  On my MacBook Pro, I occasionally use external keyboards, generally Windows ones and things have been fine. Yesterday, I plugged in a new one, remapped the command/option keys so the windows/alt keys were in the same configuration, again, nothing new here. However, this time when I unplugged the USB keyboard, the laptops option/command keys remained switched. More annoying is that if I go into the System Preferences - Keyboards - Modifier keys, remapping the keys to actions does not work. I can use the drop downs to disable any specific keys, but switching the behaviours does nothing. (Cmd/Option obvious, tried remapping anything to caps lock and a few other combinations, no joy. Restore defaults set the configuration to what I'd expect, but the settings are evidently ignored.) So: Any ideas?

  Read the article

• Which is the cheapest machine where I can run linux and plug in some webcams? (and with network inte

  - by marc.riera

  I'm looking for a very cheap machine to run a linux distro for security(anti-thief) software. I would like to be able to connect to the network and a couple of webcams. May be ip-webcams or usb-webcams. The idea is having a machine with batteryes, laptop style, but there is no need to have a display/monitor attatched all the time. I'm planning to spend no more than 200$, in case it also gets stolen. Any advice on what to buy? (all modifications to this security plan are welcome) Thanks.

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• Strange Intermittent Background Sound in Windows 7

  - by NoCarrier

  Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

  Read the article

• Why aren't there 8gb RAM modules yet?

  - by user49951

  Why is RAM module development seemingly stuck at the same size for a while now (a couple of years)? I bought 2x2gb modules 2 years ago, and now it's all the same size, with prices even bigger. I want more memory, because I work a lot on my computer and I just need it. What is going on? Hardware/memory progress was being made constantly until these couple of years, and I'm a big computer user for over 15 years. Why isn't here 4gb/8gb modules yet? I would gladly replace my DDR2 motherboard for a DDRX one if it had at least 4gb DDRX modules for a reasonable price. Now we have a situation with very cheap usb drives reaching 64gb size, and a ram modules with pathetic 2gb size. Sounds like some sort of conspiracy.

  Read the article

• Cannot find grldr in all devices

  - by blockhead

  I'm running wubi on XP machine. Started out originally with 8.04, and gradually upgraded to 10.04. Recently, I was creating linux bootable USB drive, and put it in my system to see if it would work. After booting the LiveOS, and rebooting my machine, I know get the error Cannot find grldr in all devices when booting Ubuntu. I don't know what grldr is, but I assume it is the GRUB Loader. Did booting the LiveOS screw with my MBR perhaps? How can I fix this, and if not, is it possible to reinstall wubi, without losing anything of what I have now?

  Read the article

• Can I use Distant tv server with xbmc?

  - by Chiyou

  I want to use distant tv server with xbmc because it seems to work better then mediaportal. I have tried mediaportal only for 1-2 days but I get already a couple of problems. The Pinnacle software that comes with my usb stick and distant tv server is a superior solution. How can I get it work with xbmc? Or How can I map a remote control key to pctv and a remote control key to xbmc? I want to watch TV and browse my video files?

  Read the article

• Ubuntu stops auto-mounting flash drive

  - by Brian

  It seems that after being up for a few days, my Ubuntu system refuses to auto-mount hot-plugged USB disks (i.e. flash drives). The output from dmesg shows that the kernel recognizes the device correctly. The only solution I'm aware of at the moment is to reboot (logging out may work as well, but the impact is the same since I have a bunch of stuff open and it takes a few minutes to get everything situated after startup/login). I thought gvfs-fuse-daemon was the thing responsible for managing filesystems in userspace, but killing and restarting that doesn't help. Any other ideas?

  Read the article

• In Process Explorer is it possible change scaling of activity graph the be able to further analyse graph?

  - by therobyouknow

  Is there any way to zoom in, in the System Internals Process Explorer graph? Background I'm trying to work out why my PC freezes/locks up for about a second (the pointer does not move) every so often. This has only been happening for the last 2 days. There is a very narrow spike associated with the freeze, but it's hard to hover over it an analyse what is causing it. My PC spec: ThinkPad X201S 1440x900 i7 2.0GHz 8Gb RAM, 256GB Samsung 840Pro SSD, Windows 8.1 Pro 64bit CalDigit USB 3.0 ExpressCard 34, Ultrabase X200 with DisplayPort to HDMI

  Read the article

• What power cord does a WD16001032 hard drive use?

  - by llcf

  I have a Western Digital 160GB My Book USB external hard drive (WD16001032), but I can't find its power cord (or, at least, figure out which one it is in my box of cords). It might be that only one power cord would fit, but I'm a bit cautious since I just tried one of the cords with a router and could smell electronics burning when I used an incorrect one. What voltage/amps are needed for this drive? I can't find specs on Western Digital's site. I'm assuming this is due to it being an older drive.

  Read the article

• What laptops can run an external 27" or 30" screen at 2560x1600 native resolution? [closed]

  - by Moin Zaman

  SU Folks, What laptops do you know off that can run a 27" or 30" external monitor as a secondary display (Extending desktop onto second screen, without switching off the laptop's own built in screen) at the screens native resolution of 2560x1600. I'm not interested docks or USB video adapters etc. Just via the laptop's built in display ports. List the port used and cable as well if possible. Reference links / posts that confirm it are an added bonus. I'm hoping people who've tried it themselves and / or confirmed it can list specific models of laptops so we can build up a good list.

  Read the article

• dual-boot does not work

  - by elyashiv

  I have a PC with linux-mint installed on it. I wanted to install win-7 along-side, for some reasones. what I have done is: create a bootable USB-stick with Ubontu ios. restarted the computer, this time with Ubuntu (running from my disk-on-key). created a partition on the main HD using GPart. formated the partition to NTFS. restarted the computer, this time through the installation CD for win-7. installed win-7 with normal settings. that all worked, and I'm writing this through win-7. the thing is - when I boot my system, I don't get to choose what OS to run. I checked the settings in msconfig, and in boot label it has just win-7. how can I boot linux?

  Read the article

• How can I change the default keyboard layout in Ubuntu 10.10?

  - by startoftext

  Ubuntu keeps detecting my keyboard layout as Romanian. It almost always does this on a reboot and some times on waking from sleep. Some times it just randomly changes back to Romanian while the computer is on. I always set it back to "USA" in the keyboard preferences and delete the Romanian layout. What files configure this in Ubuntu? I looked in xorg.conf and did not find any keyboard settings. How can I set this to USA permanently? I have a laptop with a typical US layout built in keyboard and I also have an apple keyboard that is also US layout connected via USB. I have run other distributions on this same setup before and never had this happen.

  Read the article

• Route gaming data over wireless and everything else through LAN?

  - by Alex

  I have two internet connections available to me. One is via LAN.. not a great ping, but fast downloads. The other is via USB wireless adapter.. good ping, but slow downloads. I want to connect to both of them simultaneously. I want to be able to specify which data or application will use the wireless connection and route everything else through the lan connection. Is this possible, and how would I do it? Windows 7 x64 is my operating system. Here is the data from route print: http://pastebin.com/vsjQRpSM I'm still unsure of how to use this to make all of my data go through the nvidia lan interface, even after reading route /? Also, if I'm able to achieve that, will it override the ForceBindIP?

  Read the article

• Mac | Router not assigning the IP address.

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >