Search Results

Search found 7325 results on 293 pages for 'windows7 32'.

Page 208/293 | < Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• VMware Data Recovery error -3960 and Event ID 8193 on Windows Server 2003

  - by flooooo

  I've been trying to solve this problem since a few days now without any success. What I'm trying is to make a backup of a virtual machine running Windows Server 2003 SP 2 using VMware Data Recovery 2.0.0.1861. When starting the backup task it tries to make a snapshot of the virtual machine using VSS which fails with error: Event Type: Error Event Source: VSS Event Category: None Event ID: 8193 Date: 05.06.2012 Time: 12:12:01 User: N/A Computer: LEGOLAS Description: Volume Shadow Copy Service error: Unexpected error calling routine RegSaveKeyExW. hr = 0x800703f8. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 2d 20 43 6f 64 65 3a 20 - Code: 0008: 57 52 54 52 45 47 52 43 WRTREGRC 0010: 30 30 30 30 30 33 39 36 00000396 0018: 2d 20 43 61 6c 6c 3a 20 - Call: 0020: 57 52 54 52 45 47 52 43 WRTREGRC 0028: 30 30 30 30 30 33 31 38 00000318 0030: 2d 20 50 49 44 3a 20 20 - PID: 0038: 30 30 30 30 36 34 38 38 00006488 0040: 2d 20 54 49 44 3a 20 20 - TID: 0048: 30 30 30 30 34 33 38 34 00004384 0050: 2d 20 43 4d 44 3a 20 20 - CMD: 0058: 43 3a 5c 57 49 4e 44 4f C:\WINDO 0060: 57 53 5c 53 79 73 74 65 WS\Syste 0068: 6d 33 32 5c 76 73 73 76 m32\vssv 0070: 63 2e 65 78 65 20 20 20 c.exe 0078: 2d 20 55 73 65 72 3a 20 - User: 0080: 4e 54 20 41 55 54 48 4f NT AUTHO 0088: 52 49 54 59 5c 53 59 53 RITY\SYS 0090: 54 45 4d 20 20 20 20 20 TEM 0098: 2d 20 53 69 64 3a 20 20 - Sid: 00a0: 53 2d 31 2d 35 2d 31 38 S-1-5-18 This machine was converted p2v. I have no idea where to search for the problem and what to do. Google showed a few result but none of them were useful for me. Please help me. If you need further information I'll tell you - just ask!

  Read the article

• Terminal Server 2008: Remote App Issue

  - by JohnyD

  I have a FoxPro 2.6 (16-bit) application that I've installed on a Win2008 (32-bit) Terminal Server. I then created a Remote App from it. It works fine. The problem is that within this FoxPro application it calls out to a .Net application. I have the proper .Net Framework installed on the server (2.0) and I have run the code access security policy tool (caspol.exe). However, when I launch the .Net app from within the FoxPro application I get the following error: Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: vector.exe Problem Signature 02: 1.0.0.3 Problem Signature 03: 48b579f2 Problem Signature 04: vector Problem Signature 05: 1.0.0.3 Problem Signature 06: 48b579f2 Problem Signature 07: f Problem Signature 08: 57 Problem Signature 09: System.Security.Security OS Version: 6.0.6001.2.1.0.18.10 Locale ID: 1033 Vector.exe is our .Net application. In fact, it's an in-between application that checks to ensure you have the latest version. When it's done it calls out to another .Net executable. Does anyone believe this should be a problem? Thanks in advance.

  Read the article

• sysctl.conf not running on boot

  - by Brian

  At what point is sysctl.conf supposed to be read during boot, and why might it not be running? I have the following settings which are not being applied when I reboot: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 fs.nfs.nlm_udpport = 32768 fs.nfs.nlm_tcpport = 32768 The first section is needed for KVM bridging, and the second is to run the NFS lock manager on a known port. However, after booting, these values have not taken effect. If I run sysctl -p, then they do. This wouldn't be a huge issue, except that I can't figure out how to restart the lock manager without rebooting. I would really like to know why sysctl.conf isn't working at boot, but I'd settle for just being able to restart the lock manager. This is on Ubuntu server 10.04.2, kernel 2.6.32-31-server. I know some daemons check the permissions on their config files and refuse to work if they're too permissive, but sysctl.conf is 644 root:root, which I'm pretty sure is the default.

  Read the article

• Page pool memory

  - by legiwei

  I'm currently using Windows XP SP3 32 bit, using C2D E6320 with 2GB RAM. When I am playing Starcraft 2, I encounter an error where it says my system is running low on page pool memory. Starcraft graphic settings suggested a high settings for me. I do not think it has to do with my GC but with my RAM. I then made a search to try to rectify the problem. Apparently, it's something to do with my virtual memory. I then proceed to try to the suggested solution which is to temper the registry and limit the page pool memory to 384MB. However, having done so, I still could not achieved it. I've seen screenshot settings of windows XP with 2GB having 384MB of page pool memory. My default settings puts it at 195MB whereas when I try to increase the pool limit, it can only go to a max of 229MB. I tried increasing my RAM capacity to 3GB but the pool limit still remains. I like to know how to increase my page pool memory. I've tried searching for solution but to no avail other than the one that I've mentioned above (which didn't solve my problem completely).

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• In GNU Screen, Recalled bash history command displays one character position to the left of actual location

  - by vergueishon

  I am running Red Hat 5 32-bit (2.6.18-194.26.1.el5). The issue is that when I recall any previous command in bash's history, the first character in the command is displayed immediately after the shell prompt, without any intervening space, likeso: \[me@mymachine tmp]$man mysql If I enter a Ctrl-C, and retype the command, it looks likeso: \[me@mymachine tmp]$ man mysql This makes recalling a command and editing it before re-entering a real pain. Basically, if I try to edit a recalled command, my changes occur one character position to the left (I believe) of what I see on the screen. It's a bit tedious to describe, and appears to only happen with commands with a large number of arguments. UPDATE: The contents of /etc/sysconfig/bash-prompt-screen, 1 #!/bin/bash 2 echo -n $'\033'"_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"$'\033\\\\' and the contents of /etc/bashrc, 24 screen) 25 if [ -e /etc/sysconfig/bash-prompt-screen ]; then 26 PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen 27 else 28 PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"; echo -ne "\033\\"' 29 fi 30 ;; I've disable bash-prompt-screen by renaming it--this fixed it. It's entirely possible that there is a fix to the bash-prompt-screen prompt line in the latest version of screen for RHEL 5. The error is seen under Screen version 4.00.03 (FAU) 23-Oct-06. (I noticed an update in the queue, which is installing as I write this.)

  Read the article

• Setup.exe called from a batch file crashes with error 0x0000006

  - by Alex

  We're going to be installing some new software on pretty much all of our computers and I'm trying to setup a GPO to do it. We're running a Windows Server 2008 R2 domain controller and all of our machines are Windows 7. The GPO calls the following script which sits on a network share on our file server. The script it self calls an executable that sits on another network share on another server. The executable will imediatelly crash with an error 0x0000006. The event log just says this: Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Setup.exe because of this error. Here's the script (which is stored on \\WIN2K8R2-F-01\Remote Applications): @ECHO OFF IF DEFINED ProgramFiles(x86) ( ECHO DEBUG: 64-bit platform SET _path="C:\Program Files (x86)\Canam" ) ELSE ( ECHO DEBUG: 32-bit platform SET _path="C:\Program Files\Canam" ) IF NOT EXIST %_path% ( ECHO DEBUG: Folder does not exist PUSHD \\WIN2K8R2-PSA-01\PSA Data\Client START "" "Setup.exe" "/q" POPD ) ELSE ( ECHO DEBUG: Folder exists ) Running the script manually as administrator also results in the same error. Setting up a shortcut with the same target and parameters works perfectly. Manually calling the executable also works. Not sure if it matters, but the installer is based on dotNETInstaller. I don't know what version though. I'd appreciate any suggestions on fixing this. Thanks in advance! UPDATE I highly doubt this matters, but the network share that the script is hosted in is a shared drive, while the network share the script references for the executable is a shared folder. Also, both shares have Domain Computers listed with full access for the sharing and security tabs. And PUSHD works without wrapping the path in quotes.

  Read the article

• 100% iowait + drive faults in dmesg

  - by w00t

  Hi, I have a server on which resides a fairly visited web app. It has a raid1 of 2 HDDs, 64MB Buffer, 7200 RPM. Today it started throwing out errors like: kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen kernel: ata2.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) kernel: ata2.00: status: { DRDY } kernel: ata2: hard resetting link kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: configured for UDMA/133 kernel: sd 1:0:0:0: timing out command, waited 7s kernel: ata2: EH complete kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back All day long it has been in load higher than 10-15. I am monitoring it with atop and it gives some bizarre readings: DSK | sda | busy 100% | read 2 | write 208 | KiB/r 16 | KiB/w 32 | MBr/s 0.00 | MBw/s 0.65 | avq 86.17 | avio 47.6 ms | DSK | sdb | busy 1% | read 10 | write 117 | KiB/r 17 | KiB/w 5 | MBr/s 0.02 | MBw/s 0.07 | avq 4.86 | avio 1.04 ms | I frankly don't understand why only sda is taking all the hit. I do have one process that is constantly writing with 1-2megs but what the hell.. 100% iowait?

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• Configure Cisco Pix 515 with DMZ and no NAT

  - by Rickard

  I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I have a Cisco PIX 515 (not E), a Cisco 2948 switch (and if needed, I can bring up a 2621XM router, but this is my private and not owned by my dept.). The network I will be getting is the following: 10.12.33.0/26 Link net between the ISP routers and my network will be 10.12.32.0/29 where GW is .1 and HSRP roututers are .2 and .3 The ISP has asked me not to NAT the addresses on my side, as they will set it up to give 10.12.33.2 as a one-to-one nat to a public IP. The rest of the IP's will be a many-to-one NAT to another public IP. 10.12.33.2 is supposed to be my server placed on the DMZ, the rest of the IP's will be used for my clients and the AD server (which is currently also acting as a DHCP server in the old network config with another ISP). Now, the question is, how would I best configure this? I mean, am I thinking wrong here, I am expected to put the PIX first from the ISP outlet, then to the switch which will connect my clients. But with the ISP routers being on a different network, how will the firewall forward the packets to the other network, it's a firewall, not a router. I have actually never configured a pix before, and fortunately, this is more like a lab network, not a production network, so if something goes wrong it's not the end of the world, if though annoying. I am not asking for a full configuration from anyone, just some directions, or possibly some links which will give me some hints. Thank you very much!

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• Slow File Copy observed copying 40GB files across network to iSCSI device

  - by Rick

  Here's a curious ones for the gurus: Setup: Source Machine: Windows Server 2003 R2 machine with local hard drive. VHD file of 40GB. 1 x 1Gbps network card, Cat6 cable, switch. Target Machine: Windows Server 2008 R2 machine with iSCSI connection to iSCSI target on separate machine (1TB, RAID5). 1 x 1Gbps network card, Cat6 cable, connected to same switch as for Source Machine. Second 1Gbps network card, Cat6 cable, connected via isolated switch to the iSCSI target. Switches are Netgear JGS524 model (web managed). If I copy from the Win2003R2 machine to Win2008R2 machine local drive I get 40GB in 45 minutes, 36 seconds. If I copy from the Win2008R2 machine to the iSCSI target (local drive to iSCSI target) I get 40GB in 37 minutes 56 seconds. If I copy from the Win2003R2 machine to the iSCSI target via the Win2008R2 machine I get 40GB in 3 hours, 50 minutes, 24 seconds. All copies were done via the following command issued on the Win2008R2 box: XCOPY <source> <target> /J XCOPY /J - Copies using unbuffered I/O. Recommended for very large files. So, what's the bit I'm missing here? Why does a back-to-back copy take in total 1 hour, 23 minutes, 32 seconds when a "straight through" copy take almost 3 times as long? Switches show no errors, network hovers around the 3% utilisation mark for the duration of the copy (whereas the "back-to-back" copies are around the 25% utilisation mark). What have I missed?

  Read the article

• CentOS 6.3 X86_64 RAM detection

  - by Peter

  I have a machine with 8GB ram (BIOS sees it, so my motherboard and CPU supports it), and I installed CentOS 6.3 on it. When it starts up, it only see 3.1GB. uname says: 2.6.32-279.1.1.el6.x86_64 #1 SMP BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable) BIOS-e820: 00000000cf65f000 - 00000000cf6e8000 (ACPI NVS) BIOS-e820: 00000000cf6e8000 - 00000000cf6ec000 (usable) BIOS-e820: 00000000cf6ec000 - 00000000cf6ff000 (ACPI data) BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) dmesg | grep -i memory says: initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cf700000 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 3319MB) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cf65f000 - 00000000cf6e8000 PM: Registered nosave memory: 00000000cf6ec000 - 00000000cf6ff000 Memory: 3184828k/3398656k available (5152k kernel code, 1016k absent, 212812k reserved, 7166k data, 1260k init) please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing cgroup subsys memory Freeing initrd memory: 16136k freed Non-volatile memory driver v1.3 agpgart-intel 0000:00:00.0: detected 8192K stolen memory crash memory driver: version 1.1 Freeing unused kernel memory: 1260k freed Freeing unused kernel memory: 972k freed Freeing unused kernel memory: 1732k freed Update: Memtest see all the 8GB, and dmidecode -t 17 | grep Size too. But free -m still see only 3.1 GB. Question: How can I repair/modify the system, to see all the 8GB RAM? Thanks in advance!

  Read the article

• MySQL problem with many concurrent connections

  - by user48303

  Hi, here's a sixcore with 32 GB RAM. I've installed MySQL 5.1.47 (backport). Config is nearly standard, except max_connections, which is set to 2000. On the other hand there is PHP5.3/FastCGI on nginx. There is a very simple php application which should be served. NGINX can handle thousands of request parallel on this machine. This application accesses MySQL via mysqli. When using non-persistent connections in mysqli there is a problem when reaching 100 concurrent connections. [error] 14074#0: *296 FastCGI sent in stderr: "PHP Warning: mysqli::mysqli(): [2002] Resource temporarily unavailable (trying to connect via unix:///tmp/mysqld.sock) in /var/www/libs/db.php on line 7 I've no idea to solve this. Connecting via tcp to mysql is terrible slow. The interesting thing is, when using persistent connections (add 'p:' to hostname in mysqli) the first 5000-10000 thousand requests fail with the same error as above until max connections (from webserver, set to 1500) is reached. After the first requests MySQL keeps it 1500 open connections and all is fine, so that I can make my 1500 concurrent requests. Huh? Is it possible, that this is a problem with PHP FastCGI?

  Read the article

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Unable to communicate with EWS from Exchange Server

  - by kschieck

  We are currently running a 2 server exchange environment with Edge services on their own. We are in the process of trying to deploy a piece of software that uses the EWS API which has brought me to this form, the software ties into the EWS service and uses it to forward messages (this is failing). Using the software error logs I have found that accessing EWS from the exchange server is not possible. From my work machine and an external address I can type the following https ://webmail.companyname.com/ews/exchange.asmx and be prompted for a username and password, once I enter credentials I get a screen full of information from services.wsdl. The problem is when I try the same URL from the exchange server and get the credentials prompt I cannot get past it. Even with the same credentials that work externally and from my desk it just keeps looping around. Capture from software log (11:41:32.6415 000017e4 System.Net.WebException: The request failed with HTTP status 401: Unauthorized.) I have also found the same results when trying https://webmail.companyname.com/ Autodiscover /Autodiscover.xml . Environment Information Server 2008 STD 64bit Exchange 2007 SP1 Purchased Cert – webmail.companyname.com I have also confirmed that all services have the proper internal and external URL’s. Any help would be appreciated.

  Read the article

• How can I run Gnome or KDE locally in Cygwin?

  - by John Peter Thompson Garcés

  Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

  Read the article

• ESX Scheduler and NUMA issue

  - by babyg_wc

  On our 24 core bl685 (4sockets x 6core), we find that NUMA nodes 0 and 1 are pretty busy (unfortunately resulting in elevated cpu ready times on the VMS), whilst NUMA nodes 2 and 3 are almost unused. I thought this just maybe a ESX4 U1 issue, so I had a colleague with a 32 core (dl785) farm investigate, and it seems that his last 3 or 4 NUMA nodes are also not really being utilised. ESX seems to have a weakness when it comes to balancing lightly loaded NUMA boxes, Im going to enabled node interleaving in the BIOS and see if the scheduler balancers across all 24 cores, instead of just 12!... For those of you with large core counts, I would suggest you fire up you viclient, and check Physical CPU useage (or esxtop), I would be interested to hear what your results are. Please note, that its only the lightly loaded (eg less than 30% cpu load on the esx host) that seems to have the biggest issue with load imbalance. Thoughts/comments. PS ive logged a SR with vmware to assist, also the other "problem" could be that we have 128gb of ram in each host, and therefore the scheduler sees no good reason why it shouldnt try and cram all vms's into the first two NUMA nodes, as we only have around 50gb of ram worth of vms on each host...

  Read the article

• MySQL encoding problem after site move

  - by Quan Zhou

  Guys, I need your help. Since last month my friend has lost his database on Dreamhost, he decided to move his wordpress based blog site (written in Chinese) to my server. He's using a wp-plugin called wp-db-backup to perform regular db backups. And the servers backgrounds are: Dreamhost: Linux 2.6.31.5-modsign-aufs2-grsec-2-opt mysql Ver 14.12 Distrib 5.0.16, for pc-linux-gnu (i386) using readline 5.0 apache2 unknown version My Server: Linux li159-46 2.6.32.12-x86_64-linode12 mysql Ver 14.14 Distrib 5.1.45, for debian-linux-gnu (x86_64) using readline 6.1 nginx 0.8.36 His site's encoding was UTF-8 in both wp-config and db. I imported his db backup file in UTF-8 by default, then I sync'd files using rsync from dreamhost, then I just changed the db address and nothing more. But when I take first look at the "new" site, it was full of unreadable characters, I met this problem before, I changed charset options in browser but none of them can make it displayed properly. Then I converted his db to GB18030, it works with only if browser set charset to GB18030 either GBK, but by default they recognize the charset as UTF-8. I tried to edit the headers but it doesn't work. What could I do now? Thx~~

  Read the article

• VMWare Guest Info - Wrong IP Returned

  - by Jon Bailey

  We're running a VDI environment with vSphere 4.0 and Oracle VDI 3.2.2 and are having a bit of a problem with users that connect to an IPSec VPN from within their VM. For some reason, once connected to the VPN, the VMWare API returns GuestInfo.ipAddress as the VPN IP rather than the primary IP of the only NIC on the system. The IP address shown in net[0].ipAddress is the correct address and is what vSphere client is reporting. Is there any way to get VMWare tools to report the net[0].ipAddress as GuestInfo.ipAddress? Below is sample output from the guestinfo.pl script. 172.16.1.2 is the example "bad" VPN address that our VDI software is seeing. VMXFLEX01 guestFamily: windowsGuest VMXFLEX01 guestFullName: Microsoft Windows XP Professional (32-bit) VMXFLEX01 guestId: winXPProGuest VMXFLEX01 guestState: running VMXFLEX01 hostName: VMXFLEX01 VMXFLEX01 ipAddress: 172.16.1.2 VMXFLEX01 toolsStatus: VMware Tools is running and the version is current. VMXFLEX01 toolsVersion: 8194 VMXFLEX01 Screen - Height: 600 VMXFLEX01 Screen - Width: 800 VMXFLEX01 Disk[0]: Capacity 42935926784 VMXFLEX01 Disk[0]: Path : C:\ VMXFLEX01 Disk[0]: freespace : 33272619008 VMXFLEX01 net[0] - connected : 1 VMXFLEX01 net[0] - deviceConfigId : 4000 VMXFLEX01 net[0] - macAddress : 00:50:56:95:1f:c9 VMXFLEX01 net[0] - network : VM Network VMXFLEX01 net[0] - ipAddress : 10.0.0.2

  Read the article

• MSE updating fails, no warning or error message.

  - by WebDevHobo

  I'm running Windows 7 Ultimate, 32-bit. For the last couple of days, MSE doesn't fails to update, remaining stuck at version 1.75.119 I presume that an error log is created somewhere, or an event log, but I don't know where to find those. It just says "connection failed". Tried it at home, at work and friends places, but never works. Restarted computer a lot of times now, checked for Microsoft Updates in general, but nothing shows up. EDIT: I've opened a bounty for this, because I really don't know what to do anymore. The oldest answer(the long post) here did not work. Besides this problem, I'm having trouble using MSI installers too. I've had to add the SYSTEM group to a lot of maps and give them full control, but shouldn't the SYSTEM already be there? Also, I had to remove the "read-only" attribute from the ProgramData and Users folders, add the SYSTEM group there too and give them full control. Only then will the MSI install work and even then, it says I doesn't have the rights to create a shortcut on the desktop. Don't know what I need to modify and where for that. I'm saying this because I don't know how MSE updates, but if they use MSI files to do that, that might explain things. The SYSTEM group remains added, but every time I take away the read only attribute, click OK and check the settings again, read-only is still active... That's all I know. Screenshot, all those updates were manual:

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

• Deciphering an IIS6 Httperr log file

  - by smackaysmith

  We have a Windows 2003 R2 SP2 server with iis6 that is creating a 1024kb httperr file every minute. I can't figure out what I'm looking at. Here's a snippet: 2010-03-24 13:15:05 10.53.2.35 1667 10.53.2.12 80 HTTP/1.1 PUT /hserver.dll?&V01|&IMAC=0080646077AB|CID=32|CN=LWT0080646077AB|ED=1|IP=10.53.2.35|SM=255.255.255.0|GW=10.53.2.1|SN=10.53.2.255|DM=logs.com|1D=10.53.2.12|2D=10.101.2.12|0D=1|AL=/usr/sbin/netxserv|AV=4.1.0.0|CP=VIAüEstherüprocessorüü800MHz|CPS=800|RM=190512|B1=1.18|PD2=1024x768x16ü@ü60Hz|IM=6.6.2-02|CI=3600|SN#=6KHDG301300|OS=23|VI=1|P1=24|TZO=-301|TZ=CDT|FS=128|MD=2003-04|CO=|LO=|AP0=BaseüSystem|NA|6.6.2-02|AP1=RapportüAgent|NA|4.1.0-3.26|AP2=TrueType|NA|6.8.0-3.4|AP3=WebFonts|NA|2.0.4-3.6|AP4=TrueTypeüFonts|NA|6.8.0-3.5|AP5=Network_login|NA|1.0.0-1.0.3|AP6=ScreenüSaver|NA|3.13|AP7=DMonitor|NA|1.0.0-0.4.0|AP8=MozillaüFirefox_15|NA|1.5.0.8-3.6|AP9=RemoteüShadow|NA|3.17|AP10=RemoteüDesktop|NA|1.6.0-1.0|AP11=SNMP|NA|5.1.3.1-3.13|AP12=LinuxüPrinting|NA|3.8.27-3.33|AP13=SSH|NA|3.8.1-3.25|AP14=ThinPrint|NA|6.2.87-0.2|AP15=XDMCP|NA|6.8.0-3.29|AP16=Ericom|NA|8.2.0-3.29|AP17=Daylightüsavingütimeüupdate|NA|1.1.0-1.0.0| 411 - LengthRequired - What on earth am I looking at? Nothing in the system or app logs. Finally, in iis manager, Default Web Site label has boxes instead of spaces. Very odd.

  Read the article

• FastCGI and Apache 500 error intermittently

  - by benkorn1

  I have a FastCGI (mod_fastcgi)problem. It happens every once in a while, and does not casue a complete server meltdown, just 500 errors. Here are a couple things. First I am using APC so PHP is in control of it's own processes, not FastCGI. Also, I have the webroot set as: /var/www/html And the fcgi-bin inside: /var/www/html/fcgi-bin First off here is the apache error_log: [Fri Jan 07 10:22:39 2011] [error] [client 50.16.222.82] (4)Interrupted system call: FastCGI: comm with server "/var/www/html/fcgi-bin/php.fcgi" aborted: select() failed, referer: http://www.domain.com/ I also ran strace on the 'fcgi-pm' process. Here is a snip from the trace around the time it bombs out: 21725 gettimeofday({1294420603, 14360}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6503 38*", 16384) = 46 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 96595}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6154 23*C /var/www/html/fcgi-bin/php.fcgi - - 6483 28*", 16384) = 92 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 270744}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 5741 38*", 16384) = 46 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 311502}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6064 32*", 16384) = 46 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 365598}, NULL) = 0 21725 read(14, "C /var/www/html/fcgi-bin/php.fcgi - - 6179 33*C /var/www/html/fcgi-bin/php.fcgi - - 5906 59*", 16384) = 92 21725 alarm(131) = 0 21725 select(15, [14], NULL, NULL, NULL) = 1 (in [14]) 21725 alarm(0) = 131 21725 gettimeofday({1294420603, 454405}, NULL) = 0 I noticed that the 'select()' seems to stay the same regardless, however the read() changes its return from 46 to some other number while it is bombing out. Has anyone seen anything like this. Could this be some sort of file locking? Thanks, Ben

  Read the article

< Previous Page | 204 205 206 207 208 209 210 211 212 213 214 215  | Next Page >