Search Results

Search found 5714 results on 229 pages for 'power mosfet'.

Page 209/229 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Old CRT screen's high resolution doesn't work anymore on windows 7

  - by Mixxiphoid

  One year ago I decided to switch from Windows XP to Windows 7. I had a 17" CRT monitor with a screen resolution of 1600x1200 which worked fine on Windows XP. While installing Windows 7 everything went well until Windows 7 was going to install the video card its driver. Windows 7 puts the screen to its recommended resolution and my screen became black. I waited a few minutes to be sure the installation was finished. I turned off the computer by hand and restarted the computer on a resolution of 800x640. When windows 7 was done installing I went to screen resolutions and the resolution of 1600x1200 was on the top of the list with '(recommended)' next to it. I tried putting it on 1600x1200 but again my screen went black. I installed all windows 7 updates including the video card driver from the NVidia site (NOT from Windows 7). I tried about everything to make it work on 1600x1200 but with no succes. The highest resolution I got with the crt monitor was 1280x1024. I had a TFT screen which had 1280x1024 as max resolution and had better colors, so I used that one till today. My video card is 9600GT and my power supply is beyond sufficient. I even tried to install the driver I had on XP to see if it worked, but no results. I tried classic mode on windows 7, changed the dpi, the frequentie and the monitor settings, but nothing worked. I really like a vertical resolution of 1200, but it seems today I'm bound to all those standard monitors with a resolution of 1980x1024... Can anybody explain to me what the cause is that it worked on Windows XP but not on Windows 7? And maybe a solution to the problem (I actually gave up on getting it fixed...) Thanks a lot in advance. SOLUTION I downloaded the according monitor driver and installed it. Next I rebooted my computer on low resolution (800x640) and connected the CRT monitor. When Windows 7 booted successfully I went to computer management and 'update the driver' of my monitor. I manually selected 'Generic PnP monitor' and made that one active. I want to advanced settings at 'Screen resolution' and selected the mode '1600x1200 (32-bit) 80 Hertz (95 Hertz did not work). Now I had my resolution on 1600x1200. I repeated the earlier step to select the original monitor again instead of the Generic monitor. Quite a way to solve this problem, but it worked! Thanks a lot you all.

  Read the article

• SCCM SP2 - OOB Management Certificates Problems

  - by Achinoam

  Hi experts, I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

  Read the article

• SCCM SP2 - OOB Management Certificates Problems

  - by Achinoam

  I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

  Read the article

• Linux filesystem with inodes close on the disk

  - by pts

  I'd like to make the ls -laR /media/myfs on Linux as fast as possible. I'll have 1 million files on the filesystem, 2TB of total file size, and some directories containing as much as 10000 files. Which filesystem should I use and how should I configure it? As far as I understand, the reason why ls -laR is slow because it has to stat(2) each inode (i.e. 1 million stat(2)s), and since inodes are distributed randomly on the disk, each stat(2) needs one disk seek. Here are some solutions I had in mind, none of which I am satisfied with: Create the filesystem on an SSD, because the seek operations on SSDs are fast. This wouldn't work, because a 2TB SSD doesn't exist, or it's prohibitively expensive. Create a filesystem which spans on two block devices: an SSD and a disk; the disk contains file data, and the SSD contains all the metadata (including directory entries, inodes and POSIX extended attributes). Is there a filesystem which supports this? Would it survive a system crash (power outage)? Use find /media/myfs on ext2, ext3 or ext4, instead of ls -laR /media/myfs, because the former can the advantage of the d_type field (see in the getdents(2) man page), so it doesn't have to stat. Unfortunately, this doesn't meet my requirements, because I need all file sizes as well, which find /media/myfs doesn't print. Use a filesystem, such as VFAT, which stores inodes in the directory entries. I'd love this one, but VFAT is not reliable and flexible enough for me, and I don't know of any other filesystem which does that. Do you? Of course, storing inodes in the directory entries wouldn't work for files with a link count more than 1, but that's not a problem since I have only a few dozen such files in my use case. Adjust some settings in /proc or sysctl so that inodes are locked to system memory forever. This would not speed up the first ls -laR /media/myfs, but it would make all subsequent invocations amazingly fast. How can I do this? I don't like this idea, because it doesn't speed up the first invocation, which currently takes 30 minutes. Also I'd like to lock the POSIX extended attributes in memory as well. What do I have to do for that? Use a filesystem which has an online defragmentation tool, which can be instructed to relocate inodes to the the beginning of the block device. Once the relocation is done, I can run dd if=/dev/sdb of=/dev/null bs=1M count=256 to get the beginning of the block device fetched to the kernel in-memory cache without seeking, and then the stat(2) operations would be fast, because they read from the cache. Is there a way to lock those inodes and/or blocks into memory once they have been read? Which filesystem has such a defragmentation tool?

  Read the article

• Gigabyte GA-Z77X-D3H MB problems

  - by Hans

  I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

  Read the article

• Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

  - by David

  I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

  Read the article

• File copying software to do this kind of work... in Windows 7 32 bit

  - by Senthil

  I need a software (Windows 7 32bit) to help me in this process: I have my documents, music, video clips, movies, pictures in my hard disk. These will not be scattered around the system. But will be inside C:\Senthil\ At the end of every week, I want to plug in an external hard disk and run a software that should make sure whatever is inside C:\Senthil\ is also present in the external disk. Files deleted from C:\Senthil\ should be deleted there, and new files should be copied etc... at the end of the process, every bit inside the source folder in my internal disk should be inside my external disk. A couple of important requirements and points: I do NOT need multiple versions or historic versions. I don't need the previous versions of my files. I only want the latest copy to be present in my "backup". Incremental backup makes sense. If files were not touched since the last backup, it need not copy. The size of my folder will run into GBs and in a year or two will go into TBs. But I will make sure the size of the external HDD is equal to or bigger than my source folder. I do not want it to run automatically because when I accidentally delete a file in my source, it will delete the one in the backup (I know this is why we have versioning facilities). I just want to be able to run it manually so that I am in control of when the backup is made and what is backed up and I should be able to pick something from the backup and restore it to the source folder in the above situation. Is there any software that will let me do exactly this? I don't want any other "smart" facility of the software to interfere with this process. I know what I want and the software can keep its smartness to itself :D The main reason I am asking this question is, I am a software developer and I can write this software myself. But I am a little constrained by time at the moment and I want to know if there is an existing program that can do this. Kindly don't worry about earthquakes or fire or snowstorms and bring up the "in case of a natural disaster your backup will also be in the damage zone and will be lost" argument because: I will have bigger things to worry about than my holiday memories. I don't think I will digitally store any life-ruining documents. This backup is only to avoid the inconvenience of obtaining a new copy of stuff that I have. Not to protect them against the end of the world. I am more worried about power surges in my area frying my system, hard disk failure, children who merrily hit Delete or teens who hit Shift + Delete or myself getting a little careless at times! In short: Is there a file/folder syncing software that listens to what I say and doesn't try to act smart? Please forgive me if I sound arrogant :)

  Read the article

• Change Logon DPI setting in Windows 8.1

  - by jmc302005

  I love how M$ keeps making decisions for me about how I want my desktop to look. Now they have added per-user dpi settings. The problem this has created is that there is no adjustable dpi setting for the Lock/Logon screen. Let me explain. you can change the dpi setting to be the same across all displays and this does affect the icons and font on the lock/logon screen. However it does not affect any app/program that can run on the lock/logon screen. Ex. I use a 44" flat screen tv for my monitor on my desktop. Big enough for me to sit in my recliner and use my comp. But I don't have a wireless keyboard. And it sucks having the wire from the keyboard running across the floor. Plus I really don't want to keep a keyboard next to me. So I use the on screen keyboard for logging in and quick typing (search, web address, etc.) So the problem is that with the new dpi setup my on screen keyboard takes up nearly half the screen. Does M$ think we are all blind? Oh no I remember they think desktops should look like tablets and phones. I tried looking through the registry to see if I could find a setting for it. In the key HKEY_USERS.DEFAULT\Control Panel\Desktop there is a string value named "LogicalDPIOverride" with a value of -1. I have a feeling this is where I can fix the issue. I tried changing the value to 0 and to 1 with no change in the result. Instead I noticed that after logging out and back in the -1 value was back in the registry. So now M$ has also added a way for us to not be able to change a setting in the registry. They are making it harder and harder for us power users to be able to do anything with the settings in windows. Soon we will all have the same exact Windows with absolutely no customization. ok sorry for the quick rant. The real question here is. How can I change this defualt dpi crap? Can I use the LogPixels string that worked for dpi in Windows 7? Here are 2 Screen shots 1 of the Lock Screen and 1 of the Logon Screen http://i.imgur.com/6RM5ufE.jpg http://i.imgur.com/cnY5bmm.jpg Please any help will be appreciated.

  Read the article

• How should I use my new SSD drive?

  - by jasondavis

  I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

  Read the article

• Can this USB3 behaviour be anything else than a hardware failure?

  - by Jonas Wielicki

  While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

  Read the article

• Synchronize the same set of files to 2 different locations with 2 different programs for 2 different purposes

  - by Hedgetrimmer

  Because of stupid questionable IT policies at my not-to-be-named place of occupation, I have been (and will be, for the forseeable future) carrying on an external hard drive a unison-synchronized copy of all of my documents and code, including code which resides in some of my "dotfiles" and other code which resides in ~/bin (things I've made are there because ~/bin is in my $PATH) along with some cruft generated (and to be generated) by conscript and its related "giter8" templating system for Scala project boilerplates. Despite this, I do use a symlinking program to store all of my important dotfiles in a subdirectory. Thanks to that somewhat complicated setup, I have resorted to making a directory full of symlinks to every directory (or file, as is the case with stuff under ~/bin) that I want synchronized, and then follow = True is in my unison profile. It happens to be that this collection of odds and ends—plus an automatically-generated text file containing every package installed on my system—is everything under ~ that needs to be backed up to a remote (rsync-over-ssh) host with client-side encryption and signing from GPG. I already believe that duplicity is the most appropriate program to do that. What isn't as clear-cut is how to make duplicity use the exact same set of files when it runs a backup; it would be simple if duplicity would follow symlinks, but it does not and the manpage lists no option for enabling any such behavior. Comparing unison's file selection algorithm to duplicity's, I don't think I can write a program that could compute a ruleset for one program given one for the other. For the record, I would rather not keep the symlinks manually synchronized with duplicity file-selection rules, as they can change thanks to the above-mentioned complications regarding ~/bin. I don't think running duplicity on the external hard disk is such a good idea either; I usually keep that hard disk unmounted and unplugged in case of a power failure or other physical problem with the computer, plus I'm not sure about duplicity's performance given that: the hard disk is NTFS-formatted in order to be useable at my Windows-imprisoned place of occupation. despite being a USB 3.0 disk, my computer has no USB 3.0 ports so it acts as a USB 2.0 disk. How can I have duplicity (or is there a better program that I have overlooked?) back up the exact same set of files that is bidirectionally synchronized with my external hard disk?

  Read the article

• I have been told to accept one error with Memtest86+

  - by DustByte

  Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

  Read the article

• Recover strategy single bad sector in moricon

  - by Damon

  This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

  Read the article

• Be your own cloud [closed]

  - by Jedi

  I have reasonably many electronic gadgets that can go LAN or WI-FI. But how do you share and/or syncronize all your files among them? Well, between my laptops and my desktop I use Dropbox. A nice way to share files among computers. But what if your HDD on your laptop is not large enough to carry music, pictures and films. Normally you would buy an extern USB HDD and store them there, but then you cannot reach the files from other computers which are not connected to the USB device. Many would say I should use a solution like a cloud with a disc station or something like that. But my needs are follows: A mass storage which can be reached among devices (laptops, desktops, iPhone, Android phone, XBox or Playstation). Has low power requirements and is silent. Can be reached inside home and it would be nice if it could be reached outside home as well. Cheap I have looked around and I have found an wireless router which can share a USB device: D-Link Wireless N HD Media Router. I thought it would be an interesting solution for a simple local cloud solution. D-Link uses a little program called SharePort Plus which mount the USB device to your computer. Unfortunately is the transfer rate to the USB storage device rather disappointing. The transfer rate was 5.8 Mbps even though the distance between the laptop and the router was 2 meter. The same is happening when I use cable from the computer to the router. Another thing is that SharePort Plus only allows one computer be connected to the device at a time. The last thing was something I could live with. I have search on the Internet for other solutions and found this video from Synology. I'm not sure if their solution is the right one. I think a disc station connected to my home LAN could the right solution. What have you done in your home to store and share files among your computers and game consoles?

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• new PC not work with existing router, but works fine when directly connecting to cable modem

  - by user34786

  I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

  Read the article

• Windows server detected error with hard disk

  - by user53864

  We have hosting Windows server 2008 R2 and I am working as admin in small company. The server is hanging and restarting as the hard disk seems to be damaged due to power fluctutaion(though having inverter) as it's showing the below error message on server reboot: Problem detected with the hard disk Press any key to continue It's Seagate 1TB SATA hard disk and it's booting after pressing enter. So it's clear that the hard disk is dying. Yes, it's in warranty but it's fact that warranty won't recover the lincesed windows server 2008 and it's data. As it's booting now, I backed up required things and I am thinking to clone the entire hard disk. The first thing it striked me is checking on the Seagate site if any tool available for cloning and I found Seagate DiskWizard but not specified it for windows server 2008. Please anybody could help me giving your best ideas for the below: Urgently, What's the best way(free of cost) for me to clone in my case with the new same sized hard disk? It's a one time lincenced and I cannot use the same key again if I reinstall the server. Will the lincense be carried with new disk if cloned? else there is a way to contact Microsoft explaining the problem occurred, to obtain new key for no charge?. I want to take measure for future. How do I keep two disks in continuous sync? mirrored & raid are the only options converting the disks to dynamic? or is there a best way I could do with no additional charge?. Any help is greatly appreciated. Thank you! EDIT:1 I started cloning the disk with CloneZilla and it was going proper showing in GUI. But after some time there is no GUI but a black screen with some codes(looks like disk location numbers) going page by page(I have attached the screenshots below captured from my phone). Do you people think it's actually cloning?. I started in the morning and it's evening now. I left the office now to let it finish what it's trying to do and I'll go & check it tomorrow. Slowly lost hope, don't know what face it's going to show tomorrow. Any ideas?

  Read the article

• Have a server, need to figure out a method of backup

  - by PolishHurricane

  My company has an older Dell 2650 server running ArchLinux x64: http://www.dell.com/downloads/global/products/pedge/en/2650_specs.pdf (2 x 2.4GHz Intel Xeon w/around 3287 RAM according to "free -m") We use it to host our internal company site and to post some information from our orders to and we'd like the ability to keep it up as much as possible. What we require: - It needs to always be functional from 8am to 4pm for our data entry person to use it and others to do other things required on it. - If it goes down, we need a quick way to get the machine running again. - If it goes down, we would like to have the data backed up. Some of the major problems include: - The servers old and it may have memory issues - We don't know when one of the hard drives could fail - Our power goes out here once in a while We have a battery backup, but that's pretty much it and it's not for long term. If the server does go down, we have another system in place to store order information that comes in while it's down and repost it when it's back, but we need it up during the day. So we're wondering, what should we get for options? These are the things we thought of, sort of: Setup RAID 1, but that would involve wiping everything right? If we do that, how would we transfer the data over without messing up the server? We could buy an extra server or 2 off eBay for $100, the same model, is that practical or should we get something else? Should we buy a PC or another better server and host off that because it is if anything easier to exchange parts? Should we keep extra parts handy incase it implodes? Should we buy/use backup software? We hear drobo's are cool, but suck. Perhaps there is a software solution to this problem that backs up to another machine or gets us up and running again quickly. Also, if we are to purchase hardware, what is decent? Does anybody know of one for ArchLinux/Linux? We both know a ton about computers but we're kind of unsure what step to take with this, especially with this type of server. Thanks

  Read the article

• Low FPS in some games, but hardware not fully used

  - by Mario De Schaepmeester

  I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

  Read the article

• How to prevent dual booted OSes from damaging each other?

  - by user1252434

  For better compatibility and performance in games I'm thinking about installing Windows additionally to Linux. I have security concerns about this, though. Note: "Windows" in the remaining text includes not only the OS but also any software running on it. Regardless of whether it comes included or is additionally installed, whether it is started intentionally or unintentionally (virus, malware). Is there an easy way to achieve the following requirements: Windows MUST NOT be able to kill my linux partition or my data disk neither single files (virus infection) nor overwriting the whole disk Windows MUST NOT be able to read data disk (- extra protection against spyware) Linux may or may not have access to the windows partition both Linux and Windows should have full access to the graphics card this rules out desktop VM solutions for gaming I want the manufacturer's windows graphics card driver Regarding Windows to be unable to destroy my linux install: this is not just the usual paranoia, that has happened to me in the past. So I don't accept "no ext4 driver" as an argument. Once bitten, twice shy. And even if destruction targeted at specific (linux) files is nearly impossible, there should be no way to shred the whole partition. I may accept the risk of malware breaking out of a barrier (e.g. VM) around the whole windows box, though. Currently I have a system disk (SSD) and a data disk (HDD), both SATA. I expect I have to add another disk. If i don't: even better. My CPU is a Intel Core i5, with VT-x and VT-d available, though untested. Ideas I've had so far: deactivate or hide other HDs until reboot at low level possible? can the boot loader (grub) do this for me? tiny VM layer: load windows in a VM that provides access to almost all hardware, except the HDs any ready made software solution for this? Preferably free. as I said: the main problem seems to be to provide full access to the graphics card hardware switch to cut power to disks commercial products expensive and lots of warnings against cheap home built solutions preferably all three hard disks with one switch (one push) mobile racks - won't wear of daily swapping be a problem?

  Read the article

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• Windows 7 immediately disconnects a USB drive

  - by Daniel Saner

  I am having a problem with Windows 7 x64 consistently disconnecting one specific USB mass storage drive immediately after it is connected. The drive in question is a Cowon C2 digital music player which works in standard mass storage controller mode (i.e. no device-specific drivers needed/available). When I connect the player, Windows plays the "USB connect" sound and the device appears (under its correct name) in the device manager, but it never appears as a drive. The player itself displays "USB Connected" for a split-second before reporting that it has been disconnected again. Since the player, by design, reboots after it has been disconnected, Windows plays the "USB disconnect" sound before restarting the whole cycle once the player has powered back on. I am connecting the player through an Intel X79 Chipset motherboard (Gigabyte GA-X79-UD3) to Windows 7 Pro 64-bit. The player used to work fine the first few times I connected it, showing up as an external drive; it only recently stopped working. It is not a problem with the player, since it works fine when connected to another computer, even such running the exact same operating system. It is also not a problem with the USB controller, since the issue is the same on both the Intel USB 2.0 and the Fresco Logic FL1009 USB 3.0 controller ports. I have also not had the problem with any other drive so far. Among the things I have tried so far: Disabling USB legacy mode in BIOS Disabling energy-saving power down for all USB controllers in Windows' device manager Removing and reinstalling Windows' USB mass storage driver Removing and reinstalling Intel and Fresco Logic USB controller driver Restoring the player to factory defaults None of these made a difference. Again, the player used to work fine on the exact same system just days ago; I didn't install any new hardware or drivers on it since then. I would be very grateful for any hints on what else to try. Edit: Here is another new hint; I found out that when I connect the drive before booting Windows, it is available in Windows Explorer as it should, and does not automatically disconnect. If I remove and reconnect it though, the infinite connect/disconnect-loop starts anew.

  Read the article

• C# HashSet<T>

  - by Ben Griswold

  I hadn’t done much (read: anything) with the C# generic HashSet until I recently needed to produce a distinct collection.  As it turns out, HashSet<T> was the perfect tool. As the following snippet demonstrates, this collection type offers a lot: // Using HashSet<T>: // http://www.albahari.com/nutshell/ch07.aspx var letters = new HashSet<char>("the quick brown fox");   Console.WriteLine(letters.Contains('t')); // true Console.WriteLine(letters.Contains('j')); // false   foreach (char c in letters) Console.Write(c); // the quickbrownfx Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.IntersectWith("aeiou"); foreach (char c in letters) Console.Write(c); // euio Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.ExceptWith("aeiou"); foreach (char c in letters) Console.Write(c); // th qckbrwnfx Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.SymmetricExceptWith("the lazy brown fox"); foreach (char c in letters) Console.Write(c); // quicklazy Console.WriteLine(); The MSDN documentation is a bit light on HashSet<T> documentation but if you search hard enough you can find some interesting information and benchmarks. But back to that distinct list I needed… // MSDN Add // http://msdn.microsoft.com/en-us/library/bb353005.aspx var employeeA = new Employee {Id = 1, Name = "Employee A"}; var employeeB = new Employee {Id = 2, Name = "Employee B"}; var employeeC = new Employee {Id = 3, Name = "Employee C"}; var employeeD = new Employee {Id = 4, Name = "Employee D"};   var naughty = new List<Employee> {employeeA}; var nice = new List<Employee> {employeeB, employeeC};   var employees = new HashSet<Employee>(); naughty.ForEach(x => employees.Add(x)); nice.ForEach(x => employees.Add(x));   foreach (Employee e in employees) Console.WriteLine(e); // Returns Employee A Employee B Employee C The Add Method returns true on success and, you guessed it, false if the item couldn’t be added to the collection.  I’m using the Linq ForEach syntax to add all valid items to the employees HashSet.  It works really great.  This is just a rough sample, but you may have noticed I’m using Employee, a reference type.  Most samples demonstrate the power of the HashSet with a collection of integers which is kind of cheating.  With value types you don’t have to worry about defining your own equality members.  With reference types, you do. internal class Employee {     public int Id { get; set; }     public string Name { get; set; }       public override string ToString()     {         return Name;     }          public bool Equals(Employee other)     {         if (ReferenceEquals(null, other)) return false;         if (ReferenceEquals(this, other)) return true;         return other.Id == Id;     }       public override bool Equals(object obj)     {         if (ReferenceEquals(null, obj)) return false;         if (ReferenceEquals(this, obj)) return true;         if (obj.GetType() != typeof (Employee)) return false;         return Equals((Employee) obj);     }       public override int GetHashCode()     {         return Id;     }       public static bool operator ==(Employee left, Employee right)     {         return Equals(left, right);     }       public static bool operator !=(Employee left, Employee right)     {         return !Equals(left, right);     } } Fortunately, with Resharper, it’s a snap. Click on the class name, ALT+INS and then follow with the handy dialogues. That’s it. Try out the HashSet<T>. It’s good stuff.

  Read the article

• Top 20 Daily Deal Sites In India

  - by Damodhar

  If you have never heard of Groupon recently, you probably are not working in the tech industry because it is all over the blogosphere. After all, growing from zero to US$1.35 billion valuation in 18 months is pretty AMAZING. Inspired by this, the following bunch of Groupon clone’s are already rising in India. Definitely this business model is emerging and changes the way online shopping happens in India. SnapDeal SnapDeal features a Best deals Coupons at an unbeatable price on the best stuff to do, see, eat, and buy in our city. It provides vouchers and discounts in all the major cities like Delhi, Mumbai, Chennai and Bangalore. KhojGuru Exclusive Discount coupons from hundreds of brands and retailers. These discounts can be easily downloaded as an SMS on to the mobile phone or their print out can be taken. MyDala A platform which gets us great deals in our city.Leveraging the “power of group buying”. Group buying happens when like minded people come together to get deals that we can never get on our own as individuals. SoSasta Great place which would not only tell us about the hidden treasures of our city — but also made them affordable to us at the end of the month. DealsAndYou Deals and You is a group buying portal that features a daily deal on the best stuff in some of India’s leading cities. AajKaCatch Its concept is to provide you the most unique, useful and qualitative product at a very low price. So you can now shop without the hassles of clustered products. BindassBargain Bindaas Bargain offers a new deal every day! Great stuff ranging from cool gadgets, home theatres, luxury watches, smash games. MasthiDeals It get you a great deal on a great stuff to do, eat, buy or see in your city. They have a team of about 25 wonderful people working in Chennai office working side by side with folks in MasthiDeal’s other cities. Koovs Founded by a team of IIT alumni who have brought in their expertise from the internet industry. Koovs is a Bangalore based start up and one point solution for all your desires. Taggle It brings you a variety of offers from some of the most respected brands in the country.This website uses collective buying to create a win-win for local businesses and their customers. BuzzInTown Buzzintown.com is a portal owned by Wortal Inc. There are a US headquartered company, with a presence pan-India through their India subsidiary, managed by a vastly experienced set of global leaders from the media, entertainment and technology industries. BuyThePrice It lines up the best win – win deals for both consumers and vendors and also ensures that each of the orders are dispatched in the shortest time possible. 24HoursLoot 24hoursLoot is an online store for selling a new t-shirt (sometime other products) everyday at deep discounted price in limited quantity/stock. DealMagic Customers get exposure to the best their city has to offer, at unbeatable prices (50-90% off).  We never feature more than one business on our website on any given day, so we have to be very very selective on who gets featured. Dealivore ICUMI Technologies Pvt Ltd is the company operating the Dealivore service. Founded in December 2009, ICUMI is privately owned and funded. LootMore An online store that exclusively focuses on selling cool quality stuff at cheap prices. Here you’ll always find the latest and greatest brands at prices you can afford. Foodome The deals features the best coupons at an unbeatable price on restaurants, fine dining on where to spend your birthday party.They provide coupon only in Chennai as of now. Top Online Shopping Sites- Nation Wide ebay.in eBay is The World’s Online Marketplace, enabling trade on a local, national and international basis. With a diverse and passionate community of individuals and small businesses, eBay offers an online platform where millions of items are traded each day. FutureBazzar Future Group, led by its founder and Group CEO, Mr. Kishore Biyani, is one of India’s leading business houses with multiple businesses spanning across the consumption space. TradeUs Launched in July 2009 and in a short span of time it has turned into one of India’s foremost shopping portals setting the Indian e-commerce abode aflame. BigShoeBazzar (BSB) is the largest online authorized shoe store in South Asia. Croma Promoted by Infiniti Retail Ltd, a 100% subsidiary of Tata Sons.One of the world’s leading retailers, ensuring that you buy nothing but the best. This article titled,Top 20 Daily Deal Sites In India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Oracle Announces New Oracle Exastack Program for ISV Partners

  - by pfolgado

  Oracle Exastack Program Enables ISV Partners to Leverage a Scalable, Integrated Infrastructure to Deliver Their Applications Tuned and Optimized for High-Performance News Facts Enabling Independent Software Vendors (ISVs) and other members of Oracle Partner Network (OPN) to rapidly build and deliver faster, more reliable applications to end customers, Oracle today introduced Oracle Exastack Ready, available now, and Oracle Exastack Optimized, available in fall 2011 through OPN. The Oracle Exastack Program focuses on helping ISVs run their solutions on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud -- integrated systems in which the software and hardware are engineered to work together. These products provide partners with a lower cost and high performance infrastructure for database and application workloads across on-premise and cloud based environments. Leveraging the new Oracle Exastack Program in which applications can qualify as Oracle Exastack Ready or Oracle Exastack Optimized, partners can use available OPN resources to optimize their applications to run faster and more reliably -- providing increased performance to their end users. By deploying their applications on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud, ISVs can reduce the cost, time and support complexities typically associated with building and maintaining a disparate application infrastructure -- enabling them to focus more on their core competencies, accelerating innovation and delivering superior value to customers. After qualifying their applications as Oracle Exastack Ready, partners can note to customers that their applications run on and support Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud component products including Oracle Solaris, Oracle Linux, Oracle Database and Oracle WebLogic Server. Customers can be confident when choosing a partner's Oracle Exastack Optimized application, knowing it has been tuned by the OPN member on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud with a goal of delivering optimum speed, scalability and reliability. Partners participating in the Oracle Exastack Program can also leverage their Oracle Exastack Ready and Oracle Exastack Optimized applications to advance to Platinum or Diamond level in OPN. Oracle Exastack Programs Provide ISVs a Reliable, High-Performance Application Infrastructure With the Oracle Exastack Program ISVs have several options to qualify and tune their applications with Oracle Exastack, including: Oracle Exastack Ready: Oracle Exastack Ready provides qualifying partners with specific branding and promotional benefits based on their adoption of Oracle products. If a partner application supports the latest major release of one of these products, the partner may use the corresponding logo with their product marketing materials: Oracle Solaris Ready, Oracle Linux Ready, Oracle Database Ready, and Oracle WebLogic Ready. Oracle Exastack Ready is available to OPN members at the Gold level or above. Additionally, OPN members participating in the program can leverage their Oracle Exastack Ready applications toward advancement to the Platinum or Diamond levels in the OPN Specialized program and toward achieving Oracle Exastack Optimized status. Oracle Exastack Optimized: When available, for OPN members at the Gold level or above, Oracle Exastack Optimized will provide direct access to Oracle technical resources and dedicated Oracle Exastack lab environments so OPN members can test and tune their applications to deliver optimal performance and scalability on Oracle Exadata Database Machine or Oracle Exalogic Elastic Cloud. Oracle Exastack Optimized will provide OPN members with specific branding and promotional benefits including the use of the Oracle Exastack Optimized logo. OPN members participating in the program will also be able to leverage their Oracle Exastack Optimized applications toward advancement to Platinum or Diamond level in the OPN Specialized program. Oracle Exastack Labs and ISV Enablement: Dedicated Oracle Exastack lab environments and related technical enablement resources (including Guided Learning Paths and Boot Camps) will be available through OPN for OPN members to further their knowledge of Oracle Exastack offerings, and qualify their applications for Oracle Exastack Optimized or Oracle Exastack Ready. Oracle Exastack labs will be available to qualifying OPN members at the Gold level or above. Partners are eligible to participate in the Oracle Exastack Ready program immediately, which will help them meet the requirements to attain Oracle Exastack Optimized status in the future. Guidelines for Oracle Exastack Optimized, as well as Oracle Exastack Labs will be available in fall 2011. Supporting Quotes "In order to effectively differentiate their software applications in the marketplace, ISVs need to rapidly deliver new capabilities and performance improvements," said Judson Althoff, Oracle senior vice president of Worldwide Alliances and Channels and Embedded Sales. "With Oracle Exastack, ISVs have the ability to optimize and deploy their applications with a complete, integrated and cloud-ready infrastructure that will help them accelerate innovation, unlock new features and functionality, and deliver superior value to customers." "We view performance as absolutely critical and a key differentiator," said Tom Stock, SVP of Product Management, GoldenSource. "As a leading provider of enterprise data management solutions for securities and investment management firms, with Oracle Exadata Database Machine, we see an opportunity to notably improve data processing performance -- providing high quality 'golden copy' data in a reduced timeframe. Achieving Oracle Exastack Optimized status will be a stamp of approval that our solution will provide the performance and scalability that our customers demand." "As a leading provider of Revenue Intelligence solutions for telecommunications, media and entertainment service providers, our customers continually demand more readily accessible, enriched and pre-analyzed information to minimize their financial risks and maximize their margins," said Alon Aginsky, President and CEO of cVidya Networks. "Oracle Exastack enables our solutions to deliver the power, infrastructure, and innovation required to transform our customers' business operations and stay ahead of the game." Supporting Resources Oracle PartnerNetwork (OPN) Oracle Exastack Oracle Exastack Datasheet Judson Althoff blog Connect with the Oracle Partner community at OPN on Facebook, OPN on LinkedIn, OPN on YouTube, or OPN on Twitter

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >