Search Results

Search found 28441 results on 1138 pages for 'ubuntu lts'.

Page 209/1138 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• Building small Ubuntu server - What hardware is recommended?

  - by 10robinho

  There are many of us who need to build small Ubuntu server. Problem is that in some countries it is hard to find and quite expensive to buy server motherboards and processors. And when one is building small server with limited budget, buying some Xenons is not really an option. So, are there any general recommendations for hardware (I think that motherboards are the main issue) that is stable and fast under Linux? I read that Intel should be the best choice for cpu + mbo combo. So, I was looking around for some Intel motherboards + i7 Ivy Bridge (like Intel DZ77BH-55K with Z77 chipset and Intel i7 3770K) but I've read that they have some issues with kernel, booting and USB ports. That is why I ask community if you have any experience with this. Maybe Intel is not the best choice here? Maybe ASUS or Gigabyte or _other company_ are more stable with Linux? I hope that this Q&As can help people in building stable Ubuntu server.

  Read the article

• Unable to install flash plugin in Ubuntu 12.04

  - by Farhat

  Yesterday I upgraded from Ubuntu 11.10 to Ubuntu 12.04 (64 bit). The upgrade went smoothly (far more than I expected). Unfortunately, I cannot seem to install the flash plugin in either Firefox or Chrome. chrome://plugins does not show flash. I tried 19:17farhat ~$ sudo apt-get install flashplugin-installer Reading package lists... Done Building dependency tree Reading state information... Done flashplugin-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Yet, I cannot seem to find anything related to flash on the system. 19:17farhat ~$ sudo updatedb [sudo] password for farhat: 19:17farhat ~$ locate libflashplayer.so 19:17farhat ~$ locate libflashplayer 19:17farhat ~$ locate libflash /usr/lib/libreoffice/program/libflashlo.so 19:17farhat ~$ I am at the end of everything I know. Any help will be appreciated. I have tried removing and reinstalling the package. Still the same results.

  Read the article

• Ubuntu 12.04 Problem connecting Internet by Mobile Broadband through LG GU220

  - by arnab.b

  I am using Ubuntu 12.04. I use my LG cellphone titled GU220 using Aircel connection .. The phone gets connected as an USB device well enough bt the network always fails to connect whenever I try to connect through mobile broadband.. I also have Windows 7 which does not fails to connect the network through PC Suite. tried it several times even after restarting both phone and Ubuntu bt in vain. Also fr 1st two days things worked well and the network was well connected, the problem started just after those two days-in from the next login..

  Read the article

• Ubuntu 12.04.1 Setup doesn't detect Windows 7 partition

  - by Dom

  I'm not really that of a linux pro, more of a noob. But i can handle console operations. Well, this is my system: ASUS ZenBook Prime UX31A 256 GB ADATA MX11 SSD Intel Core i5-3317U (Ivy-Bridge) I have a fresh installation of Windows 7 Ultimate (not activated) on a 90 GB NTFS Partition on my SSD, the rest is unassigned. I want to install Ubuntu 12.04.1 from an USB Stick (no CD-Drive...) created with Universal USB Installer 1.9.1.1. However I'm not givven the option 'Install alongside Windows', and when i choose 'other' it shows that 256 GB of 256 GB are unassigned (free) Memory. os-prober gave me: /dev/sda1/:Windows 7 (loader):Windows:chain I also tried: sudo dmraid -rE and: sudo apt-get remove dmraid with no success... How can I install Ubuntu alongside Windows? Thanks very much in advance!

  Read the article

• PHPPgAdmin not working in Ubuntu 14.04

  - by Adam

  After a fresh install of Ubuntu 14.04, I've installed postgresql and phppgadmin from the Ubuntu repos. I am using the Apache2 webserver. PHP is working fine in the webserver, as is PHPMyAdmin, but PHPPgAdmin is not working. When I try to access it at localhost/phppgadmin, I get a 404 message. I've tried creating a symlink in /var/www to the phppgadmin content, but that doesn't seem to work. How do I fix this? EDIT: note that I am using a local proxy server (squid) through which I funnel all my online traffic. While this may be part of the problem, I would be surprised if it was, because I am still on the same machine as phppgadmin and the requests logged in the apache access log indicate that incoming requests for the page are coming from the local machine (which is allowed in the policies for phppgadmin, if I understand things correctly).

  Read the article

• Pythonika installation error on ubuntu 12

  - by user1426913

  I have been following links: to install pythonika on ubuntu: How to install Pythonika on Ubuntu? I get error: $ sudo make -f Makefile.linux cc -c Pythonika.c -I/usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions -I/usr/include/python2.7/ Pythonika.c: In function ‘PyUnicodeString’: Pythonika.c:109:5: warning: passing argument 1 of ‘PyUnicodeUCS4_FromUnicode’ from incompatible pointer type [enabled by default] /usr/include/python2.7/unicodeobject.h:464:23: note: expected ‘const Py_UNICODE *’ but argument is of type ‘short unsigned int *’ Pythonika.c: In function ‘python_to_mathematica_object’: Pythonika.c:411:13: warning: passing argument 2 of ‘MLPutUnicodeString’ from incompatible pointer type [enabled by default] /usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mathlink.h:4299:1: note: expected ‘const short unsigned int *’ but argument is of type ‘Py_UNICODE ’ "/usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mprep" Pythonika.tm -o Pythonikatm.c /bin/sh: 1: /usr/local/Wolfram/Mathematica/9.0/SystemFiles/Links/MathLink/DeveloperKit/Linux/CompilerAdditions/mprep: not found make: ** [Pythonikatm.o] Error 127

  Read the article

• Using proxy on my Ubuntu 12.04 and proxy exception problem

  - by user1343713

  im new in linux systems. I recently installed Ubuntu 12.04 LTS and it works fine with me, but i have a problem. I live in the university dorms and in order to use internet i have to put proxy settings which require authentication, i had a problem with downloading from the store but i read the solution you wrote here still sometimes it works sometimes :( i dont know why. But the big problem is if i want to open any link from inside the university i have to disable the proxy, on Windows there were an exception for using the proxy you can easily do it. is there any possible way of doing that in Ubuntu 12.04 Thank you for being helpful

  Read the article

• problem in eclipse installation in Ubuntu 12.04

  - by Srijan

  Have tried more than dozen times to install Eclipse version available in the Ubuntu Software Center still to no avail. Every time I try to install it shows error i.e. unable to install. Have tried to install it using terminal as well with still the same results. After installation it refuses to run. What to do or any other packages I can use instead of Eclipse. Mainly trying to run java programs through eclipse. Thanks for the time. Am using Ubuntu 12.04 on x86-64 bit architecture.

  Read the article

• Why does my cursor jump when typing in ubuntu 11.10

  - by Stephen Myall

  When typing in Ubuntu my cursor jumps around and its not application specific. It doesn't matter or Im filing in a web form, writing an e-mail or using LibreOffice or Lyx. Im using a Sony Vaio 64bit machine. i read a previous question (link below) on this subject which indicates it may have something to do with the touchpad settings. as this has occurred in previous Ubuntu distros Im guess it is somekind of hardware issue. How do you turn of the touchpad when typing to avoid the cursor jumping around? I'd be grateful if anyone can make this stop Stephen

  Read the article

• Ubuntu 12.04 GTK Problem

  - by Dana Holt

  I am running Ubuntu 12.04 and compiled and installed GTK 3.4 to go through some GTK developer tutorials. Installing this version of GTK has caused problems with Unity. All system dialogs and top bar now have a different (older) look, and when I try to launch Nautilus I get the following message: Gtk-Message: Failed to load module "canberra-gtk-module" Initializing nautilus-open-terminal extension Initializing nautilus-dropbox 1.4.0 Initializing nautilus-gdu extension nautilus: symbol lookup error: nautilus: undefined symbol: ubuntu_menu_proxy_get I have run make uninstall on the newer version of GTK and reinstalled just about every package I can think of, but I am still having the same problem. How can I repair the default Ubuntu GTK libraries? EDIT Also, I noticed that my desktop icons are gone (launcher works), and I can't interact with the desktop. I can't drag any shortcuts to it, etc.

  Read the article

• gcc no longer works after up grade to latest Ubuntu

  - by Hugh S. Myers

  As an example: hsmyers@ubuntu:~/c_dev$ cat hello.c #include <stdio.h> int main(int argc,char **argv) { printf("Hello World!\n"); return 0; } hsmyers@ubuntu:~/c_dev$ gcc -c -o hello.o hello.c In file included from /usr/include/stdio.h:28:0, from hello.c:1: /usr/include/features.h:323:26: fatal error: bits/predefs.h: No such file or directory compilation terminated. At a guess somewhere along the way after trying to fix the error message: /usr/bin/ld: cannot find crt1.o: No such file or directory I've munged things up completely. Could anyone please advise? --hsm

  Read the article

• Cannot install ubuntu on Asus UX51VZ

  - by Andrey Frunt

  I removed Win8, changed partition table from GPT to MBR and installed Win7. The problem is that I don't see the grub after I installed ubuntu and only win7 boots. Any ideas? I tried to reinstall all of listed above about 5 times but with no success :( I tried both 13.04 and 13.10 UPD: I also tried Boot-Repair and it installed the grub2 for me but unfortunately only with options to run ubuntu, so I repaired bootrecord using windows tools to have an ability to run to windows. Anyway I still cannot configure the dual boot. Please help :)

  Read the article

• Mirroring Ubuntu on several systems in a computer lab

  - by Harvey Steck

  I am working in a new refugee school where the only Internet service available is a slow satellite connection. We are about to set up a computer lab (already have desktop systems and am about to install Ubuntu on them). I'm a newbie when it comes to Linux, but it seems a better alternative than pirated copies of Windows. I'd like to set up one Ubuntu system, and then mirror that system on perhaps ten to twenty other systems (all of which would be on an ethernet network). I expect to have an internet connection on the one system that I set up, but then it may be difficult to have enough bandwidth to go through all the same steps on the other ten systems. Can I set up the other ten or twenty computers to get all of their updates/upgrades/configuration from one master system? Can I also set things up so that students cannot change the configuration, install new programs, etc.? Appreciate any help you can give. -- Harvey

  Read the article

• I can't get Ubuntu installation to start

  - by tyler

  I have a computer with the following configuration: AZUS Sabertooth Motherboard Intel I5 2500 CPU Windows 7 installed I'm trying to install linux. I first attempted to install pin guy. I burned the ISO, booted from it, got the initial menu; attempting to either run the live version from DVD, or install to system. However the process stops at a blank screen with the blinking cursor in left corner. So I downloaded Ubuntu and got the same results. Then I tried wubi and ended up in the same position. EDIT: UEFI might be part of the problem? Based on the link below I have determined that the process will be too time consuming and or risky so I'm giving up. https://help.ubuntu.com/community/UEFIBooting

  Read the article

• Reinstall Ubuntu keeping my data intact

  - by Magnus

  I have recently upgraded my desktop OS from ubntu 12.04 to 12.10 (complete reinstall). Before the switch i made a list of all programs installed on my Ubuntu 12.04. sudo dpkg --get-selections > file After that i reinstalled Ubuntu 12.10 and when all was done i performed the following command: sudo dpkg --set-selections < file sudo apt-get dselect-upgrade Here is when the problems start, I get several warnings like this when performing the commands above: dpkg: warning: package not in database at line xxx and many of the programs is not installed. I don't know what the line means. I have serched the web and it seems that I'm not the only one suffering from this but I have not find any solution that worked for me. Any ideas what is causing this? Regards Magnus Örberg

  Read the article

• Flash isn't working in Chrome on 64 bit Ubuntu 10.10 fresh install

  - by IanBalisy

  I just installed Ubuntu 10.10 64 bit last night on my laptop and installed Google Chrome ver. 8.0.552.237. So far flash works on Firefox and Chromium, but not at all on Chrome. I did the sevenmachines install for flashplugin64 and that worked for firefox and chromium. Anyone know how to make it work on Chrome? I really would prefer to use Chrome over Chromium, but if it's not an easy fix I can switch. I'm not too Ubuntu literate, but I can figure things out if necessary. (In short, long explanations are not necessary).

  Read the article

• How to find a Window which should be visible on Ubuntu 14.04

  - by Bernard

  In Ubuntu 14.04 I have Keepass2 in my Launchbar. I do execute Keepass and I can see it is executing by a small arrow. With statement : ps - fu bernard | grep keepass2 Also with alt-tab I see Keepass. If I click on the Keepass icon still I am not switched to Keepass. The same happened to me with XAMPP from https://www.apachefriends.org so it seems a general Ubuntu 14.04 problem I execute this in Virtualbox client. If I switch sometimes to other VB client, when I come back the Windows is visible.

  Read the article

• Ubuntu stuck in low resolution after UNinstalling / disabling NVidia drivers

  - by Han Cnx

  Tried the Nvidia driver, installed using the Additional Drivers panel. Didn't like it much; the CPU seemed to overheat more and the brightness controls stopped working. Also selecting a second display is a pain using that horrible NVidia settings thing. So wanted to disabled it again.. problem is, UBuntu is then stuck in either 640x480 or 800x600 (second time I tried to install it back and then remove again). How can I get this back the way it was? The original Ubuntu drivers worked just fine, allowing me to run Unity and games properly. I tried a xserver-xorg reconfigure but this didn't do anything. (No xorg.conf file either). This is on a Lenovo Thinkpad T410i

  Read the article

• Ubuntu 14.04 and Dell E6440 - sound and mouse working after suspend/resume

  - by slawek.mikula

  I've installed fresh Ubuntu 14.04 on Dell Lattitude E6440 and i've encountered two strange issues when doing full system start/restart: - mouse scroll when full restart is working very fast. One turn of the wheel cause very large change of value (window scroll, sound change etc.) But when i suspend and resume laptop it starts working correctly (one turn of the wheel and small change of value - the same as in previous versions of Ubuntu) - sound from speakers - the same issue. When full restart the sound does not come from internal laptop speakers. It works though through headphones. After suspend/resume internal speakers starts to work. What can be a cause of these issues ?

  Read the article

• Internal Mic Ubuntu 12.04 on Compaq Presario CQ50

  - by Genius FDE

  I have problem with the internal microphone not working on Ubuntu 12.04. It looks like a common problem on most of the laptops running ubuntu 12.04. I tried a lot of possible solutions available online but nothing seems to work! sudo aplay -l gives: **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 By the way, the Laptop has no HDMI port! I've seen the same problem with Sony laptop but the mic was working with too much static noise. Thank you.

  Read the article

• Mounting Samsung Galaxy S2 via USB on Ubuntu 13.04

  - by argvar

  Connecting my Samsung Galaxy S2 to Windows 7 worked seamlessly. Now that I'm on Ubuntu 13.04 I'd like to access my phone's drive via the USB cable, but that's not working. When I do plug it in I get a error message in Ubuntu: Unable to mount SAMSUNG_Android Unable to open MTP device '[usb:002,008]' Then when I unplug it I see a error message on the phone: Attention Unable to find software on your PC that can recognize your device. Service pack 3, Windows Media Player, version 10 or higher, for Windows XP or Android FIle Transfer for Mac OS must be installed. You can download and install PC Kies from http://www.samsung.com/kies in order to sync data with your device, back up data, and upgrade your device (Windows and Mac OS are supported) What can I do here to fix this? I don't want to use any special software with the phone, just access the phone's drive.

  Read the article

• Wifi works but doesn't start automatically on ubuntu 11.10

  - by Nikita Kononov

  Good evening everyone, I have got an issue which I hope you will help me to solve. I was trying to update my Kernel in ubuntu from this web-site http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.2-rc4-oneiric/ And everything went smooth. But, for some reason, my wifi doesn't work in new Kernel so I decided to switch back to my old one 3.0.0-17 generic and to my surprise WIFI doesn't start automatically eventhou it was working. What I mean is that I have to click on wifi icon and put a mark Enable Wireless. This is not a really serious issue but I don't like switch on everytime at log in my WIFI because before that it was working when system started. What is the cause of this and how to fix it. Thank you very much for you help.

  Read the article

• Ho do I install Ubuntu on my Mac PowerPC G5

  - by Matt

  How do I install Ubuntu on my powerpc G5? which version do I download? where do I download it from? and how do I get it to install? I tried burning ubuntu powerpc 12.04 and booting from the cd and all I get is a DOS like setup prompt "boot:" I've tried 'live' and everything else listed when I push tab; but, every time I get a bunch of white text on black screen, then black text on white and then my monitor just goes black and nothing happens??? what am I doing wrong? any suggestions?

  Read the article

• Latest Ubuntu 13: Can't add more than four keyboard layouts

  - by Woofi Alakhi

  Yes, I read this article. But my questions are: I would like to try this, but I see they've written there something with "gnome" in the script. In my Ubuntu, 13.04, I have Unity. What do I do? I would have to do this for four x four keyboard layouts (to have 13 keyboard layouts). Your script, however, is designed for two x four keyboard layouts. How do I get the four x four? I would really appreciate your tips and hints on this. And I would kindly ask you to keep it simple, if possible, because I'm really no expert in both Ubuntu and computers in general.

  Read the article

• ubuntu is very slow

  - by johnny smithens

  Hello all. I am new with Ubuntu, and it is very slow(even in Ubuntu 2D). The performance is degraded for almost any task. I just reinstalled with amd64, and tried updating the Nvidia drivers with Nvidia Xserver. but it made no difference. This is the output of free -m: total used free shared buffers cached Mem: 3006 1318 1688 0 61 699 -/+ buffers/cache: 556 2449 Swap: 3064 0 3064 tl;dr - total: 3006, used: 1318 When I see the virtual console with Ctrl+Alt+F2, I see constantly: Assuming Drive Cache: write through; asking for cache data failed; It is very frustrating. Thanks in advance!

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >