Search Results

Search found 6604 results on 265 pages for 'versions'.

Page 209/265 | < Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >

• How to fix this java.lang.LinkageError?

  - by Péter Török

  I am trying to configure a custom layout class to Log4J as described in my previous post. The class uses java.util.regex.Matcher to identify potential credit card numbers in log messages. It works perfectly in unit tests (I can also programmatically configure a logger to use it and produce the expected output). However when I try to deploy it with our app in JBoss, I get the following error: --- MBEANS THAT ARE THE ROOT CAUSE OF THE PROBLEM --- ObjectName: jboss.web.deployment:war=MyWebApp-2010_02-SNAPSHOT.war,id=476602902 State: FAILED Reason: java.lang.LinkageError: java/util/regex/Matcher I couldn't even find any info on this form of the error - typically LinkageError seems to show up with a "loader constrain violation" message, like in here. Technical details: we use JBoss 4.2, Java 5, Log4J 1.2.12. We deploy our app in an .ear, which contains (among others) the above mentioned .war file, and the custom layout class in a separate jar file. We override the default settings in jboss-log4J.xml with our own log4j.properties located in a different folder, which is added to the classpath at startup, and is provided via Carbon. I can only guess: are two different Matcher class versions loaded from somewhere, or is Matcher loaded by two different classloaders when it is used from the jar and the war? What does this error message mean, and how can I fix it?

  Read the article

• Visual Studio 2008 freeze after save

  - by Klay

  I recently added about a dozen classes from another solution into my current solution in Visual Studio. After adding these classes, Visual Studio started freezing for about 10 seconds whenever I Save. The cursor disappears and mouse clicks and keys do nothing. Some interesting points: Even after I removed the classes, the freezing behavior is still there. Freezing occurs whether I've made changes to the code or not. This behavior ONLY seems to affect this particular version of this solution. No other solutions exhibit this behavior. Older versions of this solution are not affected. In Sysinternals Process Explorer, whenever I save in Visual Studio, the I/O bytes graph jumps from 0 to 2MB for about 5 seconds, then drops to about 1 MB for a split second, then jumps back to 2MB for another 5 seconds. Processor use goes up to about 3-5% during this time. Here are the details of my setup: C# Silverlight project (maybe 20 classes), .NET version 3.5 SP1, Visual Studio 2008 v9.0.30729 SP1. EDIT: I edited this question extensively to reflect the more detailed information. I thought this might be preferable to starting a new question.

  Read the article

• Object doesn't support property or method 'transformNode' in Internet Explorer 10 (Windows 8)

  - by John Chapman

  I am having some JavaScript issues that seem to only occur in Internet Explorer 10 on Windows 8 (IE 7, 8, and 9 all work fine). The basic jist of what I am doing is getting XML and XSL from a web service and then transforming them in JavaScript to render on the page using the Sys.Net.XMLDOM object. XMLDOM = Sys.Net.XMLDOM; var xsl = // XSL gotten from somewhere else var xmlString = // XML gotten from somewhere else as a string... var xml = new XMLDOM(xmlString); var content = xml.transformNode(xsl); When I use the above code in IE 10, I get: Object doesn't support property or method 'transformNode' Any ideas on why Internet Explorer 10 is doing this? EDIT I have also tried this: xmldoc = new ActiveXObject("Msxml2.DOMDocument"); xmldoc.async = false; xmldoc.load(xml); xsldoc = new ActiveXObject("Msxml2.DOMDocument"); xsldoc.async = false; xsldoc.load(xsl); var content = xmldoc.transformNode(xsldoc); Which works in all previous versions of IE, but in IE 10 I get: Reference to undeclared namespace prefix: 'atom'.

  Read the article

• Problem with GWT behind a reverse proxy - either nginx or apache

  - by Don Branson

  I'm having this problem with GWT when it's behind a reverse proxy. The backend app is deployed within a context - let's call it /context. The GWT app works fine when I hit it directly: http://host:8080/context/ I can configure a reverse proxy in front it it. Here's my nginx example: upstream backend { server 127.0.0.1:8080; } ... location / { proxy_pass http://backend/context/; } But, when I run through the reverse proxy, GWT gets confused, saying: 2009-10-04 14:05:41.140:/:WARN: Login: ERROR: The serialization policy file '/C7F5ECA5E3C10B453290DE47D3BE0F0E.gwt.rpc' was not found; did you forget to include it in this deployment? 2009-10-04 14:05:41.140:/:WARN: Login: WARNING: Failed to get the SerializationPolicy 'C7F5ECA5E3C10B453290DE47D3BE0F0E' for module 'https://hostname:444/'; a legacy, 1.3.3 compatible, serialization policy will be used. You may experience SerializationExceptions as a result. 2009-10-04 14:05:41.292:/:WARN: StoryService: ERROR: The serialization policy file '/0445C2D48AEF2FB8CB70C4D4A7849D88.gwt.rpc' was not found; did you forget to include it in this deployment? 2009-10-04 14:05:41.292:/:WARN: StoryService: WARNING: Failed to get the SerializationPolicy '0445C2D48AEF2FB8CB70C4D4A7849D88' for module 'https://hostname:444/'; a legacy, 1.3.3 compatible, serialization policy will be used. You may experience SerializationExceptions as a result. In other words, GWT isn't getting the word that it needs to prepend /context/ hen look for C7F5ECA5E3C10B453290DE47D3BE0F0E.gwt.rpc, but only when the request comes throught proxy. A workaround is to add the context to the url for the web site: location /context/ { proxy_pass http://backend/context/; } but that means the context is now part of the url that the user sees, and that's ugly. Anybody know how to make GWT happy in this case? Software versions: GWT - 1.7.0 (same problem with 1.7.1) Jetty - 6.1.21 (but the same problem existed under tomcat) nginx - 0.7.62 (same problem under apache 2.x) I've looked at the traffic between the proxy and the backend using DonsProxy, but there's nothing noteworthy there.

  Read the article

• How to retrieve value from ViewData when the object is not a string?

  - by Richard77

  Hello, Here's the functionality I'd like to exploit: I've a class myClass and would like to iterate over a collection that contains all the properties of that class. I'd like to send the index of that collection along with the other data so that I can control the each sequence of the iteration. Here's simplified versions of a Action method and View (I'll use the same action-view for that functionality). 1) Action public ActionResult CreateHierarchy(int? index) { if(index < PropertiesOfMyClass.Lenght) { //Other code omitted ViewData["index"] = ((index == null) ? 1 : index++); Return View(); } } 2)View <% Using(Html.BeginForm()){%> //Other Code omitted <% = Html.Hidden("Index", ViewData["index"])%> <input type = "submit" value = "Do someting"/> <%}%> I've also placed this at the bottom of the page so that I can check the value of the index, <% = ViewData["index"]%> Unfortunately, its not working. I'm getting only the number 1. I'm missing something? such as a cast for the Viewdata? Should I write something like this: <% = Html.Hidden("index", (int)ViewData["index"])%> It's not working either Thanks for helping

  Read the article

• MVC Localization of Default Model Binder

  - by Dai Bok

  Hi, I am currently trying to figure out how to localize the error messages generated by MVC. Let me use the default model binder as an example, so I can explain the problem. Assuming I have a form, where a user enters thier age. The user then enters "ten" in to the form, but instead of getting the expected error of "Age must be beween 18 and 25." the message "The value 'ten' is not valid for Age." is displayed. The entity's age property is defined below: [Range(18, 25, ErrorMessageResourceType = typeof (Errors), ErrorMessageResourceName = "Age", ErrorMessage = "Range_ErrorMessage")] public int Age { get; set; } After some digging, I notice that this error text comes from the System.Web.Mvc.Resources.DefaultModelBinder_ValueInvalid in the MvcResources.resx file. Now, how can create localized versions of this file? As A solution, for example, should I download MVC source and add MvcResources.en_GB.resx, MvcResources.fr_FR.resx, MvcResources.es_ES.resx and MvcResources.de_DE.resx, and then compile my own version of MVC.dll? But I don't like this idea. Any one else know a better way?

  Read the article

• html includes in a JSP using IIS/WebLogic

  - by Striker

  I have my IIS 6 server setup to process server side includes, we're also using the WebLogic ISAPI plugin for IIS. I have a simple html file that I'm trying to include in the JSP using the following include: <!-- #include file="/pleaseWait/pleaseWait.html" --> When I use the above line in a JSP I get an error message saying: "pleaseWait is not defined". From an HTML file on the web server it works fine. The include works in the HTML whether I use file or virtual. I can't use the jsp @ include because that's resolved at build time and the HTML file does not exist in the Java project. It's static content so it's on the IIS server. In the past we've change the extension to .jsp and included the images and static content in the .war file....the problem with that is we now have 10 different versions of this code in our apps and not all of them look or function the same. This is an attempt to standardize and centralize the code for this feature across our apps. Any ideas or suggestions?

  Read the article

• Filter subform using combobox

  - by TT1611

  This has taken me nearly 2 weeks and I dont know what else to do. I have a main form (UserSearch) that has a subform (TestUserSub). The associated table for both forms is tblusers. very simple; on the main form (UserSearch) I have a comboboxes associated with the fields in the tblusers eg cmbid, cmbname, cmbdept and so on. All I want, is for a user to make a selection from any of these comboboxes and for the associated fields to display in the subform (TestUserSub). I have tried several different versions of code in the afterupdate event in a couple of the comboboxes and nothing is happening in the subform or in other instances I get error message. One example i have tried is filtering running an SQL command Private Sub cmbid_AfterUpdate() Dim strSQL As String If IsNull(Me.cmbaccess) Then Me.RecordSource = "tblusers" Else strSQL = "SELECT tblUsers.[Team Member_ID] FROM tblUsers " & _ "WHERE (((tblUsers.[Team Member_ID])= " & [form_testusersub].[txtid2]))& ";" Me.RecordSource = strSQL End If End Sub The above didnt work..Can someone please help me with this. I have a sample database that i have been working off and by some very strange way, they have managed to do this same thing without calling any code. Is this possible?

  Read the article

• What are some choices to port existing Windows GUI app written in C to Linux?

  - by Warner Young

  I've been tasked with porting an existing Windows GUI app to Linux. Ideally, I'd like to do this so the same code base can be used to build either the Windows version or the Linux version. I'll be doing my work on Ubuntu 9.04. After searching around, it's unclear to me what tools are best suited to help me with this. A list of loose requirements would be: The code is in C, not C++, and should compile to build both Windows and Linux versions. Since it's existing code, and fairly large, converting to a managed language like .NET is out of the question for now. I would prefer if I can use the same dialogs in both systems. In Windows, putting up a dialog is pretty simple. You build the dialog in the Resource Editor in Visual Studio, then call DialogBox() API, and handle the event messages. I would really like to find something that can do the equivalent on the Linux side. It would also be nice to have a good IDE similar to Visual Studio. Any helps or hints would be appreciated. Thanks,

  Read the article

• grep 5 seconds of input from the serial port inside a shell-script

  - by pica

  I've got a device that I'm operating next to my PC and as it runs it's spitting log lines out it's serial port. I have this wired to my PC and I can see the log lines fine if I'm using either minicom or something like: ttylog -b 115200 -d /dev/ttyS0 I want to write 5 seconds of the device serial output to a temp file (or assign it to a variable) and then later grep that file for keywords that will let me know how the device is operating. I've already tried redirecting the output to a file while running the command in the background, and then sleeping 5 seconds and killing the process, but the log lines never get written to my temp file. Example: touch tempFile ttylog -b 115200 -d /dev/ttyS0 >> tempFile & serialPID=$! sleep 5 #kill ${serialPID} #does not work, gets wrong PID killall ttylog cat tempFile The file gets created but never filled with any data. I can also replace the ttylog line with: ttylog -b 115200 -d /dev/ttyS0 |tee -a tempFile & In neither case do I ever see any log lines logged to stdout or the log file unless I have multiple versions of ttylog running by mistake (see commented out line, D'oh). I have no idea what's going on here. It seems to be a failure of redirection within my script. Am I on the right track? Is there a better way to sample 5 seconds of the serial port?

  Read the article

• Directly accessing the modem in Windows Mobile

  - by kigurai

  For some reasons I need to be able to access the internal modem of a Windows Mobile smartphone (a HTC s740 with WM version 6.1). What I want is to be able to access it like it was a serial port in order to give AT-commands. I have code that uses the TAPI Line interface and lineGetID() to get a "handle" on which I shuld be able to do ReadFile()/WriteFile(). Sadly I have not gotten it to work. What I do currently is: Initialize TAPI with lineInitializeEx() Open the Line with lineOpen() Iterate through each available device and get info. Currently I am selecting the "UNIMODEM"/"Hayes compatible on COM1" device. But maybe I should choose the "TAPI cellular service"/"Cellular Line" instead? I have tried the "Cellular Line" device with the same result. Use lineGetID() on the selected device to get a handle. Do WriteFile("AT\r") and then directly do a ReadFile(), which should give me a "OK" back if it really was the modem I accessed. Realize that it doesn't work and get annoyed... But this has so far been a no-go. Does anyone have any idea on how to do it? I am doing this in Native WIN32 C++ on Windows Mobile 6 SDK. UPDATE: I have so far managed to get a data connection between two phones using RIL, which gives me a serial port handle to write and read from. BUT, I still would like to be able to interact directly with the modem to send AT-commands. So, the bounty I am starting only concerns getting direct access to the modem in order to give AT-commands. My investigations so far indicates that this was possible in previous versions of Windows Mobile (by opening COM2 and/or COM9 and slaying RIL, or something like that) but I have not yet seen code which works on WM6.

  Read the article

• Can ElementTree be told to preserve the order of attributes?

  - by dmckee

  I've written a fairly simple filter in python using ElementTree to munge the contexts of some xml files. And it works, more or less. But it reorders the attributes of various tags, and I'd like it to not do that. Does anyone know a switch I can throw to make it keep them in specified order? Context for this I'm working with and on a particle physics tool that has a complex, but oddly limited configuration system based on xml files. Among the many things setup that way are the paths to various static data files. These paths are hardcoded into the existing xml and there are no facilities for setting or varying them based on environment variables, and in our local installation they are necessarily in a different place. This isn't a disaster because the combined source- and build-control tool we're using allows us to shadow certain files with local copies. But even thought the data fields are static the xml isn't, so I've written a script for fixing the paths, but with the attribute rearrangement diffs between the local and master versions are harder to read than necessary. This is my first time taking ElementTree for a spin (and only my fifth or sixth python project) so maybe I'm just doing it wrong. Abstracted for simplicity the code looks like this: tree = elementtree.ElementTree.parse(inputfile) i = tree.getiterator() for e in i: e.text = filter(e.text) tree.write(outputfile) Reasonable or dumb? Related links: How can I get the order of an element attribute list using Python xml.sax? Preserve order of attributes when modifying with minidom

  Read the article

• Is there a tag in XHTML that you can put anywhere in the body - even inside TABLE elements?

  - by Iain Fraser

  I would like to be able to place an empty tag anywhere in my document as a marker that can be addressed by jQuery. However, it is important that the XHTML still validates. To give you a bit of background as to what I'm doing: I've compared the current and previous versions of a particular document and I'm placing markers in the html where the differences are. I'm then intending to use jQuery to highlight the parent block-level elements when highlightchanges=true is in the URL's query string. At the moment I'm using <span> tags but it occurred to me that this sort of thing wouldn't validate: <table> <tr> <td>Old row</td> </tr> <span class="diff"></span><tr> <td>Just added</td> </tr> </table> So is there a tag I can use anywhere? Meta tag maybe? Thanks for your help! Iain

  Read the article

• Rails 3 get raw post data and write it to tmp file

  - by Andrew

  I'm working on implementing Ajax-Upload for uploading photos in my Rails 3 app. The documentation says: For IE6-8, Opera, older versions of other browsers you get the file as you normally do with regular form-base uploads. For browsers which upload file with progress bar, you will need to get the raw post data and write it to the file. So, how can I receive the raw post data in my controller and write it to a tmp file so my controller can then process it? (In my case the controller is doing some image manipulation and saving to S3.) Some additional info: As I'm configured right now the post is passing these parameters: Parameters: {"authenticity_token"=>"...", "qqfile"=>"IMG_0064.jpg"} ... and the CREATE action looks like this: def create @attachment = Attachment.new @attachment.user = current_user @attachment.file = params[:qqfile] if @attachment.save! respond_to do |format| format.js { render :text => '{"success":true}' } end end end ... but I get this error: ActiveRecord::RecordInvalid (Validation failed: File file name must be set.): app/controllers/attachments_controller.rb:7:in `create'

  Read the article

• ruby on rails: undefined method "version_requirements' when attempting to start server after new install

  - by ezabak

  Hi there, I had to newly install ruby on rails recently. When I attempted to start the server for a project I had already been working on previous to this new install, I received the following error: $ ruby script/server => Booting WEBrick... ./script/../config/../vendor/rails/railties/lib/rails/gem_dependency.rb:107:in `requirement': undefined method `version_requirements' for #<Gem::Dependency:0xb74bf764> (NoMethodError) from ./script/../config/../vendor/rails/railties/lib/initializer.rb:292:in `check_gem_dependencies' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:292:in `map' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:292:in `check_gem_dependencies' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:165:in `process' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:112:in `send' from ./script/../config/../vendor/rails/railties/lib/initializer.rb:112:in `run' from /media/78C0-455B/bidmc/schedule/config/environment.rb:13 from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:521:in `new_constants_in' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/railties/lib/commands/servers/webrick.rb:59 from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:521:in `new_constants_in' from /media/78C0-455B/bidmc/schedule/vendor/rails/activesupport/lib/active_support/dependencies.rb:153:in `require' from /media/78C0-455B/bidmc/schedule/vendor/rails/railties/lib/commands/server.rb:49 from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require' from /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from script/server:3 I have the latest versions of ruby, rubygems, and rails. Any suggestions? Thanks.

  Read the article

• ASP MVC.Net 3 RC2 bug ?

  - by Jarek Waliszko

  Hello, so far I've been using ASP.Net 3 BETA. Everything was working fine till the update to RC2 version. Of course I've read ScottGu's article about RC2. My problem is following. Basically I have 2 controllers: public class DynamicPageController : Controller { public ActionResult Redirect(string resource, int? pageNumber, int? id) { } } public class SystemController : Controller { public ActionResult Index() { } } In the Globals.asax I have routes like this: public static void RegisterRoutes(RouteCollection routes) { routes.MapRoute( "SystemRoute", "System/{action}", new { controller = "System", action = "Index" } ); routes.MapRoute( "PageRoute", "{resource}/{id}/{pageNumber}", new { controller = "DynamicPage", action = "Redirect", resource = UrlParameter.Optional, pageNumber = UrlParameter.Optional, id = UrlParameter.Optional } ); } In the code, I have simple link creation: System.Web.Mvc.UrlHelper u = new System.Web.Mvc.UrlHelper(context); string url = u.Action("Index", "System"); and the url is "/my_app/System" in both versions (BETA and RC2) But the code below (the syntax is the same as above, only controller and action names are different): string url = u.Action("Redirect", "DynamicPage", new RouteValueDictionary(new { resource = "Home" })); gives url which is null in RC2. It should be (and in fact in BETA was) "/my_app/Home" Why ? Is it a bug ? How can I create url for my "DynamicPage" controller ? Regards BTW: From where can I now download ASP.Mvc BETA version along with ASP.Net Web Pages 1.0 installers ? Since RC2 announcement I have problems finding mentioned 2 installers. Normally I would upgrade my code but this issue described above makes me stay with BETA for a while, since I have no time for migration and testing everything now.

  Read the article

• rewrite not a member of LiftRules

  - by José Leal

  Hi guys, I was following http://www.assembla.com/wiki/show/liftweb/URL_Rewriting tutorial for url rewritting in liftweb.. but I get this error: error: value rewrite is not a member of object net.liftweb.http.LiftRules .. it is really odd.. and the documentation says that it exists. I'm using idea IDE, and I've done everything from scratch, using the lift maven blank archifact. Some more info: [INFO] ------------------------------------------------------------------------ [INFO] Building Joseph3 [INFO] task-segment: [tomcat:run] [INFO] ------------------------------------------------------------------------ [INFO] Preparing tomcat:run [INFO] [resources:resources {execution: default-resources}] [WARNING] Using platform encoding (UTF-8 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 0 resource [INFO] [yuicompressor:compress {execution: default}] [INFO] nb warnings: 0, nb errors: 0 [INFO] artifact org.mortbay.jetty:jetty: checking for updates from scala-tools.org [INFO] artifact org.mortbay.jetty:jetty: checking for updates from central [INFO] [compiler:compile {execution: default-compile}] [INFO] Nothing to compile - all classes are up to date [INFO] [scala:compile {execution: default}] [INFO] Checking for multiple versions of scala [INFO] /home/dpz/Scala/Doit/Joseph3/src/main/scala:-1: info: compiling [INFO] Compiling 2 source files to /home/dpz/Scala/Doit/Joseph3/target/classes at 1274922123910 [ERROR] /home/dpz/Scala/Doit/Joseph3/src/main/scala/bootstrap/liftweb/Boot.scala:16: error: value rewrite is not a member of object net.liftweb.http.LiftRules [INFO] LiftRules.rewrite.prepend(NamedPF("ProductExampleRewrite") { [INFO] ^ [ERROR] one error found [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] wrap: org.apache.commons.exec.ExecuteException: Process exited with an error: 1(Exit value: 1) [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 19 seconds [INFO] Finished at: Thu May 27 03:02:07 CEST 2010 [INFO] Final Memory: 20M/175M [INFO] ------------------------------------------------------------------------ Process finished with exit code 1 enter code here

  Read the article

• Pinyin Character entry on a touchscreen keyboard

  - by mmr

  The app I'm developing requires that it be deployed in China, which means that it needs to have Pinyin and Chinese character handling. I'm told that the way that our customers handle character entry is like so: Enter in the pinyin character, like 'zhang' As they enter the characters, a list of possible Chinese (Mandarin?) characters are presented to the user, like: The user will then select '1' to enter the family name that is roughly translated to 'zhang' How can I hook such programs (I believe one is called 'mspy.exe', from Microsoft, which I'm lead to believe comes with Microsoft versions of XP) into a WPF text box? Right now, the user can enter text either by using their keyboard or by using an on-screen keyboard, so I will probably need to capture the event of a keypress from either source and feed it to some OS event or to MSPY.exe or some similar program. Or is there some other way to enter pinyin and have it converted to Mandarin? Is there a program other than MSPY I should look at? EDIT: For those of you who think that this should 'just work', it does not. Chinese character entry will work just fine if entering text into notepad or the start-run menu or whatever, but it will not work in WPF. That's the key to this question: how do I enable WPF entry? There's the Google Pinyin and Sogou pinyin, but the websites are in Mandarin or Chinese or something similar and I don't read the language.

  Read the article

• JDBC/OSGi and how to dynamically load drivers without explicitly stating dependencies in the bundle?

  - by Chris

  Hi, This is a biggie. I have a well-structured yet monolithic code base that has a primitive modular architecture (all modules implement interfaces yet share the same classpath). I realize the folly of this approach and the problems it represents when I go to deploy on application servers that may have different conflicting versions of my library. I'm dependent on around 30 jars right now and am mid-way though bnding them up. Now some of my modules are easy to declare the versioned dependencies of, such as my networking components. They statically reference classes within the JRE and other BNDded libraries but my JDBC related components instantiate via Class.forName(...) and can use one of any number of drivers. I am breaking everything up into OSGi bundles by service area. My core classes/interfaces. Reporting related components. Database access related components (via JDBC). etc.... I wish for my code to be able to still be used without OSGi via single jar file with all my dependencies and without OSGi at all (via JARJAR) and also to be modular via the OSGi meta-data and granular bundles with dependency information. How do I configure my bundle and my code so that it can dynamically utilize any driver on the classpath and/or within the OSGi container environment (Felix/Equinox/etc.)? Is there a run-time method to detect if I am running in an OSGi container that is compatible across containers (Felix/Equinox/etc.) ? Do I need to use a different class loading mechanism if I am in a OSGi container? Am I required to import OSGi classes into my project to be able to load an at-bundle-time-unknown JDBC driver via my database module? I also have a second method of obtaining a driver (via JNDI, which is only really applicable when running in an app server), do I need to change my JNDI access code for OSGi-aware app servers?

  Read the article

• SharePoint extensions for VS - which version have I got?

  - by Javaman59

  I'm using Visual Studio 2008, and have downloaded VSeWSS.exe 1.2, to enable Web Part development. I am new to SP development, and am already bewildered by the number of different versions of SP, and the VS add-ons. This particular problem has come up, which highlights my confusion. I selected Add - New Project - Visual C# - SharePoint- Web Part, accepted the defaults, and VS created a project, with the main file WebPart1.cs using System; using System.Runtime.InteropServices; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Serialization; using Microsoft.SharePoint; using Microsoft.SharePoint.WebControls; using Microsoft.SharePoint.WebPartPages; namespace WebPart1 { [Guid("9bd7e74c-280b-44d4-baa1-9271679657a0")] public class WebPart1 : System.Web.UI.WebControls.WebParts.WebPart { public WebPart1() { } protected override void CreateChildControls() // <-- This line { base.CreateChildControls(); // TODO: add custom rendering code here. // Label label = new Label(); // label.Text = "Hello World"; // this.Controls.Add(label); } } } The book I'm following, Essential SharePoint 2007, by Jeff Webb, has the following for the default project - using System; <...as previously> namespace WebPart1 { [Guid("9bd7e74c-280b-44d4-baa1-9271679657a0")] public class WebPart1 : System.Web.UI.WebControls.WebParts.WebPart { // ^ this is a new style (ASP.NET) web part! [author's comment] protected override void Render(HtmlTextWriter writer) // <-- This line { // This method draws the web part // TODO: add custom rendering code here. // Label label = new Label(); // writer.Write("Output HTML"); } } } The real reason for my concern is that in this chapter of the book the author frequently mentions the distinction between "old style" web parts, and "new style" web parts, as noted in his comment on the Render method. What's happened? Why has my default Web Part got a different signature to the authors?

  Read the article

• Problem with RVM and gem that has an executable

  - by djhworld

  Hi there, I've recently made the plunge to use RVM on Ubuntu. Everything seems to have gone swimmingly...except for one thing. I'm in the process of developing a gem of mine that has a script placed within its own bin/ directory, all of the gemspec and things were generated by Jeweler. The bin/mygem file contains the following code: - #!/usr/bin/env ruby begin require 'mygem' rescue LoadError require 'rubygems' require 'mygem' end app = MyGem::Application.new app.run That was working fine on the system version of Ruby. Now...recently I've moved to RVM to manage my ruby versions a bit better, except now my gem doesn't appear to be working. Firstly I do this: - rvm 1.9.2 Then I do this: - rvm 1.9.2 gem install mygem Which installs fine, except...when I try to run the command for mygem mygem I just get the following exception: - daniel@daniel-VirtualBox:~$ mygem <internal:lib/rubygems/custom_require>:29:in `require': no such file to load -- mygem (LoadError) from <internal:lib/rubygems/custom_require>:29:in `require' from /home/daniel/.rvm/gems/ruby-1.9.2-p136/gems/mygem-0.1.4/bin/mygem:2:in `<top (required)>' from /home/daniel/.rvm/gems/ruby-1.9.2-p136/bin/mygem:19:in `load' from /home/daniel/.rvm/gems/ruby-1.9.2-p136/bin/mygem:19:in `<main>'mygem NOTE: I have a similar RVM setup on MAC OSX and my gem works fine there so I think this might be something to do with Ubuntu?

  Read the article

• Speed vs security vs compatibility over methods to do string concatenation in Python

  - by Cawas

  Similar questions have been brought (good speed comparison there) on this same subject. Hopefully this question is different and updated to Python 2.6 and 3.0. So far I believe the faster and most compatible method (among different Python versions) is the plain simple + sign: text = "whatever" + " you " + SAY But I keep hearing and reading it's not secure and / or advisable. I'm not even sure how many methods are there to manipulate strings! I could count only about 4: There's interpolation and all its sub-options such as % and format and then there's the simple ones, join and +. Finally, the new approach to string formatting, which is with format, is certainly not good for backwards compatibility at same time making % not good for forward compatibility. But should it be used for every string manipulation, including every concatenation, whenever we restrict ourselves to 3.x only? Well, maybe this is more of a wiki than a question, but I do wish to have an answer on which is the proper usage of each string manipulation method. And which one could be generally used with each focus in mind (best all around for compatibility, for speed and for security). Thanks.

  Read the article

• Self-describing file format for gigapixel images?

  - by Adam Goode

  In medical imaging, there appears to be two ways of storing huge gigapixel images: Use lots of JPEG images (either packed into files or individually) and cook up some bizarre index format to describe what goes where. Tack on some metadata in some other format. Use TIFF's tile and multi-image support to cleanly store the images as a single file, and provide downsampled versions for zooming speed. Then abuse various TIFF tags to store metadata in non-standard ways. Also, store tiles with overlapping boundaries that must be individually translated later. In both cases, the reader must understand the format well enough to understand how to draw things and read the metadata. Is there a better way to store these images? Is TIFF (or BigTIFF) still the right format for this? Does XMP solve the problem of metadata? The main issues are: Storing images in a way that allows for rapid random access (tiling) Storing downsampled images for rapid zooming (pyramid) Handling cases where tiles are overlapping or sparse (scanners often work by moving a camera over a slide in 2D and capturing only where there is something to image) Storing important metadata, including associated images like a slide's label and thumbnail Support for lossy storage What kind of (hopefully non-proprietary) formats do people use to store large aerial photographs or maps? These images have similar properties.

  Read the article

• Stop Excel from changing cell contents, ever

  - by Enable Manual-Correct

  I work with card numbers, like credit card and ID numbers. We do not do any calculations with card numbers, obviously. They are "text." I format them as text, I type them like text. I know how that works. Excel doesn't care. 16 digit card numbers get their last digit turned into a zero, changed into scientific notation, stupid stuff that I did not tell Excel to do. I need to do things like Find/Remove spaces from cells in files downloaded from our currently imperfect web-system. The system sends me files with 16 digit numbers, cells formatted as text, but due to bugs there are spaces at the end. I do Find/Remove all spaces and all my card numbers are transformed into scientific notation and the last digit turned into a 0. THEY ARE TEXT, they are formatted as text, I yelled into the screen that they are text, why does Excel refuse to acknowledge that they are text? (I would rather find a way to stop Excel's action than find a way to tell our programmers to put an apostrophe in every cell) How do I make it so that Excel just STOPS doing anything that I didn't tell it to do? Or at least stop it from doing anything to numbers it doesn't like. Maybe I can write a macro for whenever it discovers "Uhoh I should change that number to something different!" I'll make it format that cell to text a thousand times instead. Give me an error when I try calculating with a number larger than 15 digits, make my computer explode violently, that's fine. Just stop changing the numbers. Is it possible? I have many thousands of numbers that need changing in many different scenarios. I just want to stop it from trying to help. I can't understand why that would be difficult. I have 2007, but answers for other versions would be great as well. Thank you!

  Read the article

• How to convert a printer driver to a stand-alone console application which can generate a printer fi

  - by Thorbjørn Ravn Andersen

  I have a situation where the only way to generate a certain datafile is to print it manually to FILE: under Windows and save it in a file for further processing. I would really like to have a small stand-alone program which embeds this binary printer driver so I can run it from a batch file and have it generate that binary file for me, as we can then fully automate the "save file in Visio, 'print' it and upload it to the final destination and trigger a remote test". Is this possible with a suitable Windows SDK? I am a Java programmer, so I do not know Visual Studio and the possibilities with MSDN - yet! - but I'd appreciate pointers. EDIT: I have the installation files for that printer driver, both 32 and 64 bit. Older versions may include a 16 bit driver. EDIT: The "print to FILE:" functionality is just what was recommended by the documentation. I have played a little bit with using the LPR-protocol to see what it can do. I'd still prefer the "invoke small binary" approach.

  Read the article

< Previous Page | 205 206 207 208 209 210 211 212 213 214 215 216  | Next Page >