Search Results

Search found 898 results on 36 pages for '2014'.

Page 21/36 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

  - by EXIT_FAILURE

  My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. This was so that windows (or I) wouldn't inadvertently mess it up. However, and in retrospect, foolishly, I left the RAID disks connected, thinking that windows wouldn't be so ridiculous as to mess with a HDD that it sees as just unallocated space. Boy was I wrong! After copying over the installation files to the SSD (as expected and desired), it also created an ntfs partition on one of the RAID disks. Both unexpected and totally undesired! . I changed out the SSDs again, and booted up in linux. mdadm didn't seem to have any problem assembling the array as before, but if I tried to mount the array, I got the error message: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I then used qparted to delete the newly created ntfs partition on /dev/sdd so that it matched the other three /dev/sd{b,c,e}, and requested a resync of my array with echo repair > /sys/block/md0/md/sync_action This took around 4 hours, and upon completion, dmesg reports: md: md0: requested-resync done. A bit brief after a 4-hour task, though I'm unsure as to where other log files exist (I also seem to have messed up my sendmail configuration). In any case: No change reported according to mdadm, everything checks out. mdadm -D /dev/md0 still reports: Version : 1.2 Creation Time : Wed May 23 22:18:45 2012 Raid Level : raid6 Array Size : 3907026848 (3726.03 GiB 4000.80 GB) Used Dev Size : 1953513424 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon May 26 12:41:58 2014 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 4K Name : okamilinkun:0 UUID : 0c97ebf3:098864d8:126f44e3:e4337102 Events : 423 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde Trying to mount it still reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I'm a bit unsure where to proceed from here, and trying stuff "to see if it works" is a bit too risky for me. This is what I suggest I should attempt to do: Tell mdadm that /dev/sdd (the one that windows wrote into) isn't reliable anymore, pretend it is newly re-introduced to the array, and reconstruct its content based on the other three drives. I also could be totally wrong in my assumptions, that the creation of the ntfs partition on /dev/sdd and subsequent deletion has changed something that cannot be fixed this way. My question: Help, what should I do? If I should do what I suggested , how do I do that? From reading documentation, etc, I would think maybe: mdadm --manage /dev/md0 --set-faulty /dev/sdd mdadm --manage /dev/md0 --remove /dev/sdd mdadm --manage /dev/md0 --re-add /dev/sdd However, the documentation examples suggest /dev/sdd1, which seems strange to me, as there is no partition there as far as linux is concerned, just unallocated space. Maybe these commands won't work without. Maybe it makes sense to mirror the partition table of one of the other raid devices that weren't touched, before --re-add. Something like: sfdisk -d /dev/sdb | sfdisk /dev/sdd Bonus question: Why would the Windows 7 installation do something so st...potentially dangerous? Update I went ahead and marked /dev/sdd as faulty, and removed it (not physically) from the array: # mdadm --manage /dev/md0 --set-faulty /dev/sdd # mdadm --manage /dev/md0 --remove /dev/sdd However, attempting to --re-add was disallowed: # mdadm --manage /dev/md0 --re-add /dev/sdd mdadm: --re-add for /dev/sdd to /dev/md0 is not possible --add, was fine. # mdadm --manage /dev/md0 --add /dev/sdd mdadm -D /dev/md0 now reports the state as clean, degraded, recovering, and /dev/sdd as spare rebuilding. /proc/mdstat shows the recovery progress: md0 : active raid6 sdd[4] sdc[1] sde[3] sdb[0] 3907026848 blocks super 1.2 level 6, 4k chunk, algorithm 2 [4/3] [UU_U] [>....................] recovery = 2.1% (42887780/1953513424) finish=348.7min speed=91297K/sec nmon also shows expected output: ¦sdb 0% 87.3 0.0| > |¦ ¦sdc 71% 109.1 0.0|RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR > |¦ ¦sdd 40% 0.0 87.3|WWWWWWWWWWWWWWWWWWWW > |¦ ¦sde 0% 87.3 0.0|> || It looks good so far. Crossing my fingers for another five+ hours :) Update 2 The recovery of /dev/sdd finished, with dmesg output: [44972.599552] md: md0: recovery done. [44972.682811] RAID conf printout: [44972.682815] --- level:6 rd:4 wd:4 [44972.682817] disk 0, o:1, dev:sdb [44972.682819] disk 1, o:1, dev:sdc [44972.682820] disk 2, o:1, dev:sdd [44972.682821] disk 3, o:1, dev:sde Attempting mount /dev/md0 reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And on dmesg: [44984.159908] EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! [44984.159912] EXT4-fs (md0): group descriptors corrupted! I'm not sure what do do now. Suggestions? Output of dumpe2fs /dev/md0: dumpe2fs 1.42.8 (20-Jun-2013) Filesystem volume name: Atlas Last mounted on: /mnt/atlas Filesystem UUID: e7bfb6a4-c907-4aa0-9b55-9528817bfd70 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 244195328 Block count: 976756712 Reserved block count: 48837835 Free blocks: 92000180 Free inodes: 243414877 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 791 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stripe width: 2 Flex block group size: 16 Filesystem created: Thu May 24 07:22:41 2012 Last mount time: Sun May 25 23:44:38 2014 Last write time: Sun May 25 23:46:42 2014 Mount count: 341 Maximum mount count: -1 Last checked: Thu May 24 07:22:41 2012 Check interval: 0 (<none>) Lifetime writes: 4357 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: e177a374-0b90-4eaa-b78f-d734aae13051 Journal backup: inode blocks dumpe2fs: Corrupt extent header while reading journal super block

  Read the article

• LDAP + NFS + automount home directories permissions issue

  - by noobishguy

  When an LDAP user logs into the system they have incorrect permissions to their home directory. LDAP and NFS services exist on the same server. The directory shows the correct ownership / permissions: drwx------. 4 ldaptest ldaptest 4096 Jun 9 2014 ldaptest however the UID / GID do not match those on the server client: bash-4.1$ id uid=10001(ldaptest) gid=10001(ldaptest) groups=10001(ldaptest) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 server: [root@ldap1 log]# id ldaptest uid=502(ldaptest) gid=502(ldaptest) groups=502(ldaptest) How do I resolve this?

  Read the article

• Apache error log interpretation

  - by HTF

  It looks like someone gained access to my server. How I can find out which Apache vHosts this log is related to? How these commands from the log are invoked and how/why they are printed to the log file - is this some remote shell or PHP script? /var/log/httpd/error_log mkdir: cannot create directory `/tmp/.kdso': File exists --2014-06-13 13:29:17-- http://updates.dyndn-web.com/abc.txt Resolving updates.dyndn-web.com... 94.23.49.91 Connecting to updates.dyndn-web.com|94.23.49.91|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5055 (4.9K) [text/plain] Saving to: `abc.txt' 0K .... 100% 303K=0.02s 2014-06-13 13:29:17 (303 KB/s) - `abc.txt' saved [5055/5055] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed ^M 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0^M101 5055 101 5055 0 0 79686 0 --:--:-- --:--:-- --:--:-- 154k minerd64: no process killed minerd32: no process killed named: no process killed kernelupdates: no process killed kernelcfg: no process killed kernelorg: no process killed ls: cannot access /tmp/.ICE-unix: No such file or directory mkdir: cannot create directory `/tmp': File exists --2014-06-13 13:29:18-- http://updates.dyndn-web.com/64.tar.gz Resolving updates.dyndn-web.com... 94.23.49.91 Connecting to updates.dyndn-web.com|94.23.49.91|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 205812 (201K) [application/x-tar] Saving to: `64.tar.gz' 0K .......... .......... .......... .......... .......... 24% 990K 0s 50K .......... .......... .......... .......... .......... 49% 2.74M 0s 100K .......... .......... .......... .......... .......... 74% 2.96M 0s 150K .......... .......... .......... .......... .......... 99% 3.49M 0s 200K 100% 17.4M=0.1s 2014-06-13 13:29:18 (1.99 MB/s) - `64.tar.gz' saved [205812/205812] sh: ./kernelupgrade: Permission denied

  Read the article

• Beginner server local installation

  - by joanjgm

  Here's the thing I own a small business and currently my emails are being managed by some regular hosting using cpanel and that I bought a small server and installed windows server and exchange Can you tell what I did wrong here Installed and configured my current existing domain Configured all email address Installed noip in case my public address change In the cpanel of the domain I've added an MX record to the noip domain of the server with priority 0 so now emails are being received by my own server Now whenever I send an email to anyone gmail hotmail etc I get a response that cannot be delivered since may be junk This didn't happen when I sent emails from the hosting What's missing what did I do wrong heres the code mx.google.com rejected your message to the following e-mail addresses: Joan J. Guerra Makaren ([email protected]) mx.google.com gave this error: [186.88.202.13 12] Our system has detected that this message is likely unsolicited mail. To reduce the amount of spam sent to Gmail, this message has been blocked. Please visit http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for more information. cn9si815432vcb.71 - gsmtp Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery. Diagnostic information for administrators: Generating server: SERVERMEGA.megaconstrucciones.com.ve [email protected] mx.google.com #550-5.7.1 [186.88.202.13 12] Our system has detected that this message is 550-5.7.1 likely unsolicited mail. To reduce the amount of spam sent to Gmail, 550-5.7.1 this message has been blocked. Please visit 550-5.7.1 http://support.google.com/mail/bin/answer.py?hl=en&answer=188131 for 550 5.7.1 more information. cn9si815432vcb.71 - gsmtp ## Original message headers: Received: from SERVERMEGA.megaconstrucciones.com.ve ([fe80::9096:e9c2:405b:6112]) by SERVERMEGA.megaconstrucciones.com.ve ([fe80::9096:e9c2:405b:6112%10]) with mapi; Thu, 29 May 2014 11:32:19 -0430 From: prueba <[email protected]> To: "Joan J. Guerra Makaren" <[email protected]> Subject: Probando correos Thread-Topic: Probando correos Thread-Index: Ac97V1eW4OBFmoqJTRGoD7IPTC2azg== Date: Thu, 29 May 2014 16:04:35 +0000 Message-ID: <[email protected]> Accept-Language: en-US, es-VE Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: Content-Type: multipart/alternative; boundary="_000_000f42494487966276f7b241megaconstruccionescomve_" MIME-Version: 1.0

  Read the article

• Development stopped: Is truecrypt unsecure?

  - by Alex Mantel

  I was looking for truecrypt today and found this: http://truecrypt.sourceforge.net/ The page layout changed and claims "truecrypt is unsecure". Futher: "The development of TrueCrypt was ended in 5/2014 after Microsoft terminated support of Windows XP" My Questions: What are the risks for still using truecrypt? Will there be any fork of truecrypt? Is Windows "BitLocker" trustable? Is the reason why the development stopped reliable? Which independent alternatives are there for Linux, MacOS and Windows?

  Read the article

• Getting null value after adding objects to customClass

  - by Brian Stacks

  Ok here's my code first viewController.h @interface ViewController : UIViewController<UICollectionViewDataSource,UICollectionViewDelegate> { NSMutableArray *twitterObjects; } @property (strong, nonatomic) IBOutlet UICollectionView *myCollectionView; Here is my viewController.m // // ViewController.m // MDF2p2 // // Created by Brian Stacks on 6/5/14. // Copyright (c) 2014 Brian Stacks. All rights reserved. // #import "ViewController.h" // add accounts framework to code #import <Accounts/Accounts.h> // add social frameworks #import <Social/Social.h> #import "TwitterCustomObject.h" #import "CustomCell.h" #import "DetailViewController.h" @interface ViewController () @end @implementation ViewController -(void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender { //CustomCell * cell = (CustomCell*)sender; //NSIndexPath *indexPath = [_myCollectionView indexPathForCell:cell]; // setting an id for view controller DetailViewController *detailViewcontroller = segue.destinationViewController; //TwitterCustomObject *newCustomClass = [twitterObjects objectAtIndex:indexPath.row]; if (detailViewcontroller != nil) { // setting the custom customClass object //detailViewcontroller.myNewCurrentClass = newCustomClass; } } - (void)viewDidLoad { twitterObjects = [[NSMutableArray alloc]init]; [super viewDidLoad]; [self twitterAPIcall]; // Do any additional setup after loading the view, typically from a nib. } - (NSInteger)collectionView:(UICollectionView *)collectionView numberOfItemsInSection:(NSInteger)section { return 100; } - (UICollectionViewCell *)collectionView:(UICollectionView *)collectionView cellForItemAtIndexPath:(NSIndexPath *)indexPath { //UICollectionViewCell *cell = [collectionView dequeueReusableCellWithReuseIdentifier:@"myCell" forIndexPath:indexPath]; // initiate celli CustomCell * cell = [collectionView dequeueReusableCellWithReuseIdentifier:@"myCell" forIndexPath:indexPath]; // add objects to cell if (cell != nil) { //TwitterCustomObject *newCustomClass = [twitterObjects objectAtIndex:indexPath.row]; //[cell refreshCell:newCustomClass.userName userImage:newCustomClass.userImage]; [cell refreshCell:@"Brian" userImage:[UIImage imageNamed:@"love.jpg"]]; } return cell; } -(void)twitterAPIcall { //create an instance of the account store from account frameworks ACAccountStore *accountStore = [[ACAccountStore alloc]init]; // make sure we have a valid object if (accountStore != nil) { // get the account type ex: Twitter, FAcebook info ACAccountType *accountType = [accountStore accountTypeWithAccountTypeIdentifier:ACAccountTypeIdentifierTwitter]; // make sure we have a valid object if (accountType != nil) { // give access to the account iformation [accountStore requestAccessToAccountsWithType:accountType options:nil completion:^(BOOL granted, NSError *error) { if (granted) { //^^^success user gave access to account information // get the info of accounts NSArray *twitterAccounts = [accountStore accountsWithAccountType:accountType]; // make sure we have a valid object if (twitterAccounts != nil) { //NSLog(@"Accounts: %@",twitterAccounts); // get the current account information ACAccount *currentAccount = [twitterAccounts objectAtIndex:0]; // make sure we have a valid object if (currentAccount != nil) { //string from twitter api NSString *requestString = @"https://api.twitter.com/1.1/friends/list.json"; // request the data from the request screen call SLRequest *myRequest = [SLRequest requestForServiceType:SLServiceTypeTwitter requestMethod:SLRequestMethodGET URL:[NSURL URLWithString:requestString] parameters:nil]; // must authenticate request [myRequest setAccount:currentAccount]; // perform the request named myRequest [myRequest performRequestWithHandler:^(NSData *responseData, NSHTTPURLResponse *urlResponse, NSError *error) { // check to make sure there are no errors and we have a good http:request of 200 if ((error == nil) && ([urlResponse statusCode] == 200)) { // make array of dictionaries from the twitter api data using NSJSONSerialization NSArray *twitterFeed = [NSJSONSerialization JSONObjectWithData:responseData options:0 error:nil]; NSMutableArray *nameArray = [twitterFeed valueForKeyPath:@"users"]; // for loop that loops through all the post for (NSInteger i =0; i<[twitterFeed count]; i++) { NSString *nameString = [nameArray valueForKeyPath:@"name"]; NSString *imageString = [nameArray valueForKeyPath:@"profile_image_url"]; NSLog(@"Name feed: %@",nameString); NSLog(@"Image feed: %@",imageString); // get data into my mutable array TwitterCustomObject *twitterInfo = [self createPostFromArray:[nameArray objectAtIndex:i]]; //NSLog(@"Image feed: %@",twitterInfo); if (twitterInfo != nil) { [twitterObjects addObject:twitterInfo]; } } } }]; } } } else { // the user didn't give access UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Warning" message:@"This app will only work with twitter accounts being allowed!." delegate:self cancelButtonTitle:@"OK" otherButtonTitles:nil, nil]; [alert performSelectorOnMainThread:@selector(show) withObject:nil waitUntilDone:FALSE]; } }]; } } } -(TwitterCustomObject*)createPostFromArray:(NSArray*)postArray { // create strings to catch the data in NSArray *userArray = [postArray valueForKeyPath:@"users"]; NSString *myUserName = [userArray valueForKeyPath:@"name"]; NSString *twitImageURL = [userArray valueForKeyPath:@"profile_image_url"]; UIImage *image = [UIImage imageWithData:[NSData dataWithContentsOfURL:[NSURL URLWithString:twitImageURL]]]; // initiate object to put the data in TwitterCustomObject *twitterData = [[TwitterCustomObject alloc]initWithPostInfo:myUserName myImage:image]; NSLog(@"Name: %@",myUserName); return twitterData; } -(IBAction)done:(UIStoryboardSegue*)segue { } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } @end Here is my customObject class TwitterCustomClass.h // // TwitterCustomObject.h // MDF2p2 // // Created by Brian Stacks on 6/5/14. // Copyright (c) 2014 Brian Stacks. All rights reserved. // #import <Foundation/Foundation.h> @interface TwitterCustomObject : NSObject { } @property (nonatomic, readonly) NSString *userName; @property (nonatomic, readonly) UIImage *userImage; -(id)initWithPostInfo:(NSString*)screenName myImage:(UIImage*)myImage; @end TwitterCustomClass.m // // TwitterCustomObject.m // MDF2p2 // // Created by Brian Stacks on 6/5/14. // Copyright (c) 2014 Brian Stacks. All rights reserved. // #import "TwitterCustomObject.h" @implementation TwitterCustomObject -(id)initWithPostInfo:(NSString*)screenName myImage:(UIImage*)myImage { // initialize as object if (self = [super init]) { // use the data to be passed back and forth to the tableview _userName = [screenName copy]; _userImage = [myImage copy]; } return self; } @end The problem is I get the values in the method twitterAPIcall, I can get the names and image values or strings from the values. But in the (TwitterCustomObject*)createPostFromArray:(NSArray*)postArray method all values are coming up as null.I thought it got added with this line of code in the twitterAPIcall method [twitterObjects addObject:twitterInfo];?

  Read the article

• when text changed inputbox automatically updates next 6 text boxes

  - by James123

  I have 7 textboxes. If Top 1 textbox(Volume All Years) text changed, text need to be updated in next 6 inputboxes(Latest 2009 Volume to Latest 2014 Volume). I need javascript or Jquery for this. I will write Js textchanged() or focuschange() for top 1 textbox. So what should I write in focuschage() or textchanged methods() <tr id="row12_136" class="RegText"> <td style="width:420px;Padding-right:20px;">Volume All Years</td> <td style="width:420px;Padding-left:0px;"> <input name="12_136" type="text" maxlength="255" id="12_136" tabindex="61" title="Volume All Years" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> </td> </tr><tr id="row12_60" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2009 Volume*</td> <td style="width:420px;Padding-left:0px;"> <input name="12_60" type="text" maxlength="255" id="12_60" tabindex="62" title="Latest 2009 Volume" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> <span controltovalidate="12_60" errormessage="* Required!" display="Dynamic" validationGroup="ValidateInsert" id="_ctl47" evaluationfunction="RequiredFieldValidatorEvaluateIsValid" initialvalue="" style="color:Red;display:none;">* Required!</span> </td> </tr><tr id="row12_61" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2010 Volume*</td> <td style="width:420px;Padding-left:0px;"> <input name="12_61" type="text" maxlength="255" id="12_61" tabindex="63" title="Latest 2010 Volume" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> <span controltovalidate="12_61" errormessage="* Required!" display="Dynamic" validationGroup="ValidateInsert" id="_ctl48" evaluationfunction="RequiredFieldValidatorEvaluateIsValid" initialvalue="" style="color:Red;display:none;">* Required!</span> </td> </tr><tr id="row12_62" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2011 Volume*</td> <td style="width:420px;Padding-left:0px;"> <input name="12_62" type="text" maxlength="255" id="12_62" tabindex="64" title="Latest 2011 Volume" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> <span controltovalidate="12_62" errormessage="* Required!" display="Dynamic" validationGroup="ValidateInsert" id="_ctl49" evaluationfunction="RequiredFieldValidatorEvaluateIsValid" initialvalue="" style="color:Red;display:none;">* Required!</span> </td> </tr><tr id="row12_63" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2012 Volume*</td> <td style="width:420px;Padding-left:0px;"> <input name="12_63" type="text" maxlength="255" id="12_63" tabindex="65" title="Latest 2012 Volume" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> <span controltovalidate="12_63" errormessage="* Required!" display="Dynamic" validationGroup="ValidateInsert" id="_ctl50" evaluationfunction="RequiredFieldValidatorEvaluateIsValid" initialvalue="" style="color:Red;display:none;">* Required!</span> </td> </tr><tr id="row12_64" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2013 Volume*</td> <td style="width:420px;Padding-left:0px;"> <input name="12_64" type="text" maxlength="255" id="12_64" tabindex="66" title="Latest 2013 Volume" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> <span controltovalidate="12_64" errormessage="* Required!" display="Dynamic" validationGroup="ValidateInsert" id="_ctl51" evaluationfunction="RequiredFieldValidatorEvaluateIsValid" initialvalue="" style="color:Red;display:none;">* Required!</span> </td> </tr><tr id="row12_65" class="RegText"> <td style="width:420px;Padding-right:20px;">Latest 2014 Volume*</td> <td style="width:420px;Padding-left:0px;"> <input name="12_65" type="text" maxlength="255" id="12_65" tabindex="67" title="Latest 2014 Volume" class="textbox" OnKeyPress="javascript:FocusChange();" style="width:300px;" /> <span controltovalidate="12_65" errormessage="* Required!" display="Dynamic" validationGroup="ValidateInsert" id="_ctl52" evaluationfunction="RequiredFieldValidatorEvaluateIsValid" initialvalue="" style="color:Red;display:none;">* Required!</span> </td>

  Read the article

• Your thoughts on Best Practices for Scientific Computing?

  - by John Smith

  A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

  Read the article

• Panduit Delivers on the Digital Business Promise

  - by Kellsey Ruppel

  How a 60-Year-Old Company Transformed into a Modern Digital BusinessConnecting with audiences through a robust online experience across multiple channels and devices is a nonnegotiable requirement in today’s digital world. Companies need a digital platform that helps them create, manage, and integrate processes, content, analytics, and more.Panduit, a company founded nearly 60 years ago, needed to simplify and modernize its enterprise application and infrastructure to position itself for long-term growth. Learn how it transformed into a digital business using Oracle WebCenter and Oracle Business Process Management. Join this webcast for an in-depth look at how these Oracle technologies helped Panduit: Increase self-service activity on their portal by 75% Improve number and quality of sales leads through increased customer interactions and registration over the web and mobile Create multichannel self-service interactions and content-enabled business processes Register now for this webcast. Register Now Presented by:Andy KershawSenior Director, Oracle WebCenter, Oracle BPM and Oracle Social Network Product Management, OracleVidya IyerIT Delivery Manager, PanduitPatrick GarciaIT Solutions Architect, Panduit Copyright © 2014, Oracle Corporation and/or its affiliates.All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement

  Read the article

• Oracle ‘In Touch’ PartnerCast – Be prepared for a year of growth!

  - by Claudia Caramelli-Oracle

  Dear partner, you are warmly welcomed to join your host David Callaghan, Senior Vice President Alliances & Channels - Oracle EMEA, for the latest headlines from the Oracle Partner Network. With a strong focus on direct partner benefit, 'In Touch' is your chance to stay up to date, share best practices and pose those burning questions to Oracle that you would like answered. In this next cast, David’s studio guests and his regional reporters will be looking at the priorities for EMEA partners and how best to grow with Oracle as we move into the new financial year. So please click here and register now!This partnercast will be held on Jul 01, 2014 from10:30am to 11:15am GMT.  Don't miss this opportunity and follow the conversation on Twitter searching for #OracleInTouch hashtag.

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• The Modern Marketer’s Guide to Connected Customer Journeys

  - by Richard Lefebvre

  By Amanda Batista on Thursday, August 14, 2014 in Marketing Efficiency Organizations are striving to deliver consistent experiences but very few feel they are there yet. It’s a simple consideration for marketers, really. Not only does industry data continue to support that customers demand personalized experiences when engaging with brands, but if you think about your own consumer driven shopping experiences, you, too, expect that stellar experience at every touch point. And when you don’t get it, that brand has potentially alienated the experience, as well as their shot at engaging with you in more meaningful ways. Oracle Marketing Cloud partnered with marketingfinder.co.uk to conduct a survey exploring how marketers are adapting to this new age of the customer and the challenges they face. Less than half (40%) of marketers in the study were able to track the customer journey across channels. These findings, as well as other data points showcasing marketers’ challenges, are explored in our latest eBook, “The Modern Marketer's Guide to Connected Customer Journeys.” Read the entire article and order your copy of the full report here

  Read the article

• ¿Quieres conocer el impacto del rollout de Oracle Transportation Management en Unilever Europa?

  - by user703855

  Unilever anuncia un nuevo proyecto logístico que le permitirá alcanzar en 2014 una reducción aproximada de 200 millones de km anuales en la distancia recorrida por sus camiones. Estos datos toman como referencia los niveles de tráfico de 2010 en Europa.   Jan Zijderveld, Presidente de Unilever Europa, afirma: “Este proyecto es un gran paso en nuestro plan de Sostenibilidad. La reducción del número de km que necesitan realizar nuestros camiones implicará una reducción muy significativa del impacto medioambiental de nuestra cadena de suministro. Pero los beneficios de negocio obtenidos a través de dicha iniciativa son igualmente importantes. Demuestran, una vez más, el caso de negocio implícito en la obtención de dicha sostenibilidad. No sólo reduciremos nuestras emisiones de carbono, sino que los ahorros obtenidos a largo plazo de dicha reducción nos ayudaran a ser más eficientes y efectivos en términos de coste. “ Puedes leer la nota de prensa completa de Unilever aquí

  Read the article

• Scripting out Contained Database Users

  - by Argenis

    Today’s blog post comes from a Twitter thread on which @SQLSoldier, @sqlstudent144 and @SQLTaiob were discussing the internals of contained database users. Unless you have been living under a rock, you’ve heard about the concept of contained users within a SQL Server database (hit the link if you have not). In this article I’d like to show you that you can, indeed, script out contained database users and recreate them on another database, as either contained users or as good old fashioned logins/server principals as well. Why would this be useful? Well, because you would not need to know the password for the user in order to recreate it on another instance. I know there is a limited number of scenarios where this would be necessary, but nonetheless I figured I’d throw this blog post to show how it can be done. A more obscure use case: with the password hash (which I’m about to show you how to obtain) you could also crack the password using a utility like hashcat, as highlighted on this SQLServerCentral article. The Investigation SQL Server uses System Base Tables to save the password hashes of logins and contained database users. For logins it uses sys.sysxlgns, whereas for contained database users it leverages sys.sysowners. I’ll show you what I do to figure this stuff out: I create a login/contained user, and then I immediately browse the transaction log with, for example, fn_dblog. It’s pretty obvious that only two base tables touched by the operation are sys.sysxlgns, and also sys.sysprivs – the latter is used to track permissions. If I connect to the DAC on my instance, I can query for the password hash of this login I’ve just created. A few interesting things about this hash. This was taken on my laptop, and I happen to be running SQL Server 2014 RTM CU2, which is the latest public build of SQL Server 2014 as of time of writing. In 2008 R2 and prior versions (back to 2000), the password hashes would start with 0x0100. The reason why this changed is because starting with SQL Server 2012 password hashes are kept using a SHA512 algorithm, as opposed to SHA-1 (used since 2000) or Snefru (used in 6.5 and 7.0). SHA-1 is nowadays deemed unsafe and is very easy to crack. For regular SQL logins, this information is exposed through the sys.sql_logins catalog view, so there is really no need to connect to the DAC to grab an SID/password hash pair. For contained database users, there is (currently) no method of obtaining SID or password hashes without connecting to the DAC. If we create a contained database user, this is what we get from the transaction log: Note that the System Base Table used in this case is sys.sysowners. sys.sysprivs is used as well, and again this is to track permissions. To query sys.sysowners, you would have to connect to the DAC, as I mentioned previously. And this is what you would get: There are other ways to figure out what SQL Server uses under the hood to store contained database user password hashes, like looking at the execution plan for a query to sys.dm_db_uncontained_entities (Thanks, Robert Davis!) SIDs, Logins, Contained Users, and Why You Care…Or Not. One of the reasons behind the existence of Contained Users was the concept of portability of databases: it is really painful to maintain Server Principals (Logins) synced across most shared-nothing SQL Server HA/DR technologies (Mirroring, Availability Groups, and Log Shipping). Often times you would need the Security Identifier (SID) of these logins to match across instances, and that meant that you had to fetch whatever SID was assigned to the login on the principal instance so you could recreate it on a secondary. With contained users you normally wouldn’t care about SIDs, as the users are always available (and synced, as long as synchronization takes place) across instances. Now you might be presented some particular requirement that might specify that SIDs synced between logins on certain instances and contained database users on other databases. How would you go about creating a contained database user with a specific SID? The answer is that you can’t do it directly, but there’s a little trick that would allow you to do it. Create a login with a specified SID and password hash, create a user for that server principal on a partially contained database, then migrate that user to contained using the system stored procedure sp_user_migrate_to_contained, then drop the login. CREATE LOGIN <login_name> WITH PASSWORD = <password_hash> HASHED, SID = <sid> ; GO USE <partially_contained_db>; GO CREATE USER <user_name> FROM LOGIN <login_name>; GO EXEC sp_migrate_user_to_contained @username = <user_name>, @rename = N’keep_name’, @disablelogin = N‘disable_login’; GO DROP LOGIN <login_name>; GO Here’s how this skeleton would look like in action: And now I have a contained user with a specified SID and password hash. In my example above, I renamed the user after migrated it to contained so that it is, hopefully, easier to understand. Enjoy!

  Read the article

• SQL Server Data Tools–BI for Visual Studio 2013 Re-released

  - by Greg Low

  Customers used to complain that the tooling for creating BI projects (Analysis Services MD and Tabular, Reporting Services, and Integration services) has been based on earlier versions of Visual Studio than the ones they were using for their other work in Visual Studio (such as C#, VB, and ASP.NET projects). To alleviate that problem, the shipment of those tools has been decoupled from the shipment of the SQL Server product. In SQL Server 2014, the BI tooling isn’t even included in the released version of SQL Server. This allows the team to keep up-to-date with the releases of Visual Studio. A little while back, I was really pleased to see that the Visual Studio 2013 update for SSDT-BI (SQL Server Data Tools for Business Intelligence) had been released. Unfortunately, they then had to be withdrawn. The good news is that they’re back and you can get the latest version from here: http://www.microsoft.com/en-us/download/details.aspx?id=42313

  Read the article

• Interessiert an einem Experience Pass für Java, SQL oder PL/SQL?

  - by britta wolf

  Im Mai startete die Oracle Academy über das "Introduction to Computer Science Programm" erstmals eine Experience Pass Kampagne. Das Introduction-Programm bietet Lehrkräften die Möglichkeit, an speziell organisierten Trainings zu Java, Database Design, SQL oder PL/SQL teilzunehmen und quasi einen ausgewählten Ausbildungspfad zu durchlaufen. Nach erfolgreichem Abschluss (mit einem Oracle Academy Zertifikat) können diese Themen dann an den jeweiligen Schulen unterrichtet werden. Dieses spezielle Ausbildungsprogramm läuft bereits seit mehreren Jahren erfolgreich in Österreich und wird seit Frühjahr 2014 nun auch für deutsche Schulen angeboten! Lehrkräfte, die das Thema Java oder SQL bzw. PL/SQL  bereits seit längerer Zeit unterrichten und kein Ausbildungstraining benötigen, können einen sogennanten Experience Pass anfordern. Mit einem solchen Pass kann man auf die gehosteten Lehrinhalte zugreifen und diese auch im Untericht einsetzen. Benötigen Sie weitere Informationen? Dann kontaktieren Sie mich gerne unter [email protected] 

  Read the article

• Webcast: 12.2.4 Advanced Planning Command Center Enhancements

  - by ChristineS-Oracle

  Webcast: 12.2.4 Advanced Planning Command Center Enhancements Date: June 12, 2014 at 11:00 am ET, 10:00 am CT, 9:00 am MT, 8:00 am PT, 8:30 pm, India Time (Mumbai, GMT+05:30) This advisor webcast helps Functional Users and IT Analysts understand the new features introduced in Advanced Planning Command Center (APCC) as part of 12.2.4 release. These include custom hierarchies, custom measures, additional measures like projected on hand etc. Other new features include new reports like Build Plan, Order Details. It also includes new integration capabilities between APCC and DRP and support for Trade Planning in APCC. Topics will include: New Feature Introduction Feature Overview and Setup Steps Implementation Tips & Best Practices Details & Registration: Doc ID 1670447.1

  Read the article

• Tips for adapting Date table to Power View forecasting #powerview #powerbi

  - by Marco Russo (SQLBI)

  During the keynote of the PASS Business Analytics Conference, Amir Netz presented the new forecasting capabilities in Power View for Office 365. I immediately tried the new feature (which was immediately available, a welcome surprise in a Microsoft announcement for a new release) and I had several issues trying to use existing data models. The forecasting has a few requirements that are not compatible with the “best practices” commonly used for a calendar table until this announcement. For example, if you have a Year-Month-Day hierarchy and you want to display a line chart aggregating data at the month level, you use a column containing month and year as a string (e.g. May 2014) sorted by a numeric column (such as 201405). Such a column cannot be used in the x-axis of a line chart for forecasting, because you need a date or numeric column. There are also other requirements and I wrote the article Prepare Data for Power View Forecasting in Power BI on SQLBI, describing how to create columns that can be used with the new forecasting capabilities in Power View for Office 365.

  Read the article

• In-Store Innovations with Oracle Retail 14

  - by Marie-Christin Hansen-Oracle

  In this latest video from our demo series filmed at the 2014 NRF BIG Show in New York, Master Principal Consultant Rachel Staniland details innovations in Oracle Retail Stores Solutions. Oracle Retail Stores Solutions provide a brand platform and enable true multichannel retailing. The solution gives retailers improved visibility into store inventory, which both reduces store operating costs and improves the level of customer service offered in-store through store associates. In the below video, Rachel Staniland talks about Oracle Retail’s new tablet POS, coming out the Oracle Retail 14 release, as well innovations made across Store Inventory Management and Point-of-Service solutions. Access more information on Oracle Retail Stores Solutions.

  Read the article

• Save the Date for the Oracle Storage Community Forum at Oracle OpenWorld

  - by Ritu Chhibber-Oracle

  Dear Partners, Come and meet Oracle's Top Storage Executives, Architects and Fellow Customers & Partners at the Oracle Storage Community Forum at Oracle OpenWorld on October 1, 2014. This special event will feature interactive sessions on Oracle's Application Engineered Storage strategy, product directions, and real-world customer implementations. Discover the possibilities, as only Oracle can co-engineer hardware with Oracle Database and applications to deliver extreme performance, dynamic automation, management efficiency and cost savings. Storage Forum at Oracle OpenWorld Wednesday, October 1, 20143:30 p.m. - 5:00 p.m. Forum5:00 p.m. - 6:00 p.m. Reception Venue:Metreon – City View135 Fourth Street, Suite 4000,San Francisco, CA 94103 For more details and to register, please click here.

  Read the article

• Java EE and GlassFish Server Roadmap Update

  - by John Clingan

  2013 has been a stellar year for both the Java EE and GlassFish Server communities. On June 12, Oracle and its partners announced the release of Java EE 7, which delivers on three major themes – HTML5, developer productivity, and meeting enterprise demands. The online event attracted over 10,000 views in the first two days! During the online event, Oracle also announced the availability of GlassFish Server Open Source Edition 4, the world's first Java EE 7 compatible application server. The primary role of GlassFish Server Open Source Edition has been, and continues to be, driving adoption of the latest release of the Java Platform, Enterprise Edition. Oracle also announced the Java EE 7 SDK, which bundles GlassFish Server Open Source Edition 4, as a Java EE 7 learning aid. Last, Oracle publicly announced the Java EE 7 reference implementation based on GlassFish Server Open Source Edition 4. Java EE is a popular platform, as evidenced by the 20+ Java EE 6 compatible implementations available to choose from. After the launch of Java EE 7 and GlassFish Server Open Source Edition 4, we began planning the Java EE 8 roadmap, which was covered during the JavaOne Strategy Keynote. To summarize, there is a lot of interest in improving on HTML5 support, Cloud, and investigating NoSQL support. We received a lot of great feedback from the community and customers on what they would like to see in Java EE 8. As we approached JavaOne 2013, we started planning the GlassFish Server roadmap. What we announced at JavaOne was that GlassFish Server Open Source Edition 4.1 is scheduled for 2014. Here is an update to that roadmap. GlassFish Server Open Source Edition 4.1 is scheduled for 2014 We are planning updates as needed to GlassFish Server Open Source Edition, which is commercially unsupported As we head towards Java EE 8: The trunk will eventually transition to GlassFish Server Open Source Edition 5 as a Java EE 8 implementation The Java EE 8 Reference Implementation will be derived from GlassFish Server Open Source Edition 5. This replicates what has been done in past Java EE and GlassFish Server releases. Oracle will no longer release future major releases of Oracle GlassFish Server with commercial support – specifically Oracle GlassFish Server 4.x with commercial Java EE 7 support will not be released. Commercial Java EE 7 support will be provided from WebLogic Server. Oracle GlassFish Server will not be releasing a 4.x commercial version Expanding on that last bullet, new and existing Oracle GlassFish Server 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. Oracle recommends that existing commercial Oracle GlassFish Server customers begin planning to move to Oracle WebLogic Server, which is a natural technical and license migration path forward: Applications developed to Java EE standards can be deployed to both GlassFish Server and Oracle WebLogic Server GlassFish Server and Oracle WebLogic Server have implementation-specific deployment descriptor interoperability (here and here). GlassFish Server 3.x and Oracle WebLogic Server share quite a bit of code, so there are quite a bit of configuration and (extended) feature similarities. Shared code includes JPA, JAX-RS, WebSockets (pre JSR 356 in both cases), CDI, Bean Validation, JAX-WS, JAXB, and WS-AT. Both Oracle GlassFish Server 3.x and Oracle WebLogic Server 12c support Oracle Access Manager, Oracle Coherence, Oracle Directory Server, Oracle Virtual Directory, Oracle Database, Oracle Enterprise Manager and are entitled to support for the underlying Oracle JDK. To summarize, Oracle is committed to the future of Java EE.  Java EE 7 has been released and planning for Java EE 8 has begun. GlassFish Server Open Source Edition continues to be the strategic foundation for Java EE reference implementation going forward. And for developers, updates will be delivered as needed to continue to deliver a great developer experience for GlassFish Server Open Source Edition. We are planning for GlassFish Server Open Source Edition 5 as the foundation for the Java EE 8 reference implementation, as well as bundling GlassFish Server Open Source Edition 5 in a Java EE 8 SDK, which is the most popular distribution of GlassFish. This will allow GlassFish releases to be more focused on the Java EE platform and community-driven requirements. We continue to encourage community contributions, bug reports, participation on the GlassFish forum, etc. Going forward, Oracle WebLogic Server will be the single strategic commercially supported application server from Oracle. Disclaimer: The preceding is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract.It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

  Read the article

• Live from the #summit13 keynote : 2013-10-17

  - by AaronBertrand

  Douglas McDowell (EVP Finance) takes the stage (no kilt), and talks numbers. PASS has an impressive $1MM in reserves as a "rainy day" fund. Last fiscal year they spent $7.6MM on community; 30% of that internationally. Bill Graziano comes on (no kilt) to say goodbye and thanks to the outgoing board members, Douglas McDowell, Rob Farley and Rushabh Mehta. Thomas LaRock comes on. No kilt , but he did tuck his shirt in . He introduces the incoming executive team. The 2014 PASS Business Analytics Conference...(read more)

  Read the article

• The August '14 Oracle Virtualization Newsletter is Now Available

  - by Chris Kawalek

  The August 2014 edition of the Oracle Virtualization Newsletter is now available! You can catch up on what's been going on with Oracle VM, Oracle Secure Global Desktop, and Oracle VM VirtualBox by reading the latest issue. Here are some highlights: Oracle Announces Oracle VM 3.3 Release Technology Preview of OpenStack Icehouse with Oracle Linux and Oracle VM Now Available Getting Started with Oracle VM, Oracle Linux, and OpenStack Oracle VM Test Drive Workshop on Cisco UCS Updated Oracle VM Storage Connect Plug-in for Oracle ZFS Storage Appliance Now Available Controlled Remote Access with Oracle Secure Global Desktop and amitego VISULOX And much more! You can read the latest edition online right now or sign up to get it automatically delivered to your inbox.

  Read the article

• GPT Not mounting using "normal" GPT mounting techniques 12.04

  - by Roy Markham

  I've got two 2TB drivess: one MBR and the other GPT. sudo blckid /dev/sdb1 returns a blank. gdisk shows: Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Warning! Secondary partition table overlaps the last partition by 1970 blocks! You will need to delete this partition or resize it in another utility. Disk /dev/sdb: 3907027055 sectors, 1.8 TiB Logical sector size: 512 bytes Disk identifier (GUID): 38A1113D-B5E9-4B69-ABFF-ACB27AFB3DDD Partition table holds up to 128 entries First usable sector is 34, last usable sector is 3907027021 Partitions will be aligned on 8-sector boundaries Total free space is 2014 sectors (1007.0 KiB) Number Start (sector) End (sector) Size Code Name 1 34 262177 128.0 MiB 0C01 Microsoft reserved part 2 264192 3907028991 1.8 TiB 0700 Basic data partition mounting via fstab or -t gives same error when using NTFS or NTFS-3g "NTFS signature is missing" GParted says one partition is overwriting another, yet windows shows no errors at all. The drive is also mounted easily via MacOs (triple boot)

  Read the article

• Recommended certification to join in a game development internship [on hold]

  - by Conrado Costa

  I'm Brazilian and I'll go to California in July 2014 to study for 1 year and I'm intending to get a winter internship in the game development industry. I'm a programmer since 2008 and I know C#, PHP, Java, Python and a bit of Perl. My question is: do you know any certified required (or helpful) to get a winter job as a game developer? I have no problem to learn new languages, I'm thinking to get a C or C++ certified because I'm not sure about which is the most used language, but before to start a study marathon to take a certification, I have to choose the language and the certification itself. Can you help me, and is that a valid question?

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >