Search Results

Search found 2602 results on 105 pages for 'dell poweredge'.

Page 21/105 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • What is this Cable for? 4 Pin to 2 Pin from Riser to Perc in Dell R410

    - by Kyle Brandt
    I got a new raid card for a R410 server since the S300 that came with it doesn't support raid with Linux (No work around for this if SAS from what I could find). Anyways, the RAID card has 2 pins on it and there is a cable that that connects to a 4 pin connection on the riser. The cable only has two wires, one black and one red. What is this cable for? My guess would be maybe LED status for the front panel or something like that, but I am just guessing....

    Read the article

  • Do I need DELL OpenManage to generate snmp traps on RAID degradation?

    - by jishi
    I need to setup surveillance on all our servers to spot any RAID degradation in time. However, not all of our servers have OpenManage installed, and since they are in production I don't like the idea of installing it on them. Therefor: Is it necessary to have it installed in order to get an event-log for any degradation of the RAID? Because, if I get an event-log I can send an SNMP trap, if I understand it correctly. I thought it was the driver that responsible for the event-logging, but on a machine that recently had a degradation, I can't seem to find any log event for it.

    Read the article

  • replacement drive cage for power edge R710

    - by bumble_bee_tuna
    Hi I'm performance tuning a DB server its a Dell R710 there is a very significant I/O bottleneck. Unfortunately the server was purchased with the 6 x 3.5 inch sata configuration which doesn't give me the leeway I need to address the issue. Before going to DAS does anyone know if it is possible to purchase a replacement front drive enclosure ? I know the server is configurable with something like 12 or 16 2.5 inch drives and it appears to be modular ? I tired contacting dell but the offshore parts department reps are not very bright lol. Thanks.

    Read the article

  • Can the features of Dell OpenManage be replaced by Microsoft System Center?

    - by bwerks
    Hi all, I'm new to both OpenManage and System Center, but it sounds as if they're geared towards similar problems/goals. Are the features comparable enough that OpenManage can be forgone completely in favor of System Center products? Specifically I'm hoping to achieve storage monitoring and remote administration, although if someone with experience with both wants to provide a quick compare/contrast (objective, of course) I won't complain. Thanks!

    Read the article

  • Is there a way to obtain a Dell server's RAID configuration/level using only winrm/wsman? (ESXi servers)

    - by EGr
    I've seen videos describing how to configure RAID using wsman/winrm commands run against a server's iDRAC, but I can't seem to find anything that will just give me the current configuration and RAID levels. Is this possible? What uri would I use? If it matters, this is being run against M610s. Edit: If there is an easier way to obtain this information by running a script against the iDRAC, I'm not opposed to switching my methods. EDIT: The server is running ESXi, so if there is a way to obtain this through the vSphere client or PowerCLI, I can do that too. Overall, I just need a way to obtain the RAID configuration for multiple servers without having to query against the actual server (eg: via the iDRAC).

    Read the article

  • What are the specific uses of these hardware? [closed]

    - by vincentbelkin
    So I'm trying to learn more about databases and information systems. However I need more explanation on the specific purpose of these hardware. I'm not sure if they are servers or what. HP AlphaServer ES47 Tower Tru64 Unix Intel-Based B, Proliant ML350GA Two Intel-Based A Proliant ML570T03 Intel-Based X236 Intel Quad Core Xeon Category B X3500 Poweredge 1400 SC Btw I'm just a college student who wants to know more about these hardware

    Read the article

  • Is it normal for the laptop charger to spark when plugging in?

    - by Cd-MaN
    All the laptop chargers I had until now sparked whever I plugged them in. This is true for my old charger (the bulkier / rounder Dell model) and the new charger (the flat Dell model) with two different Dell laptops, however until recently I didn't give it much thought. Then, in the last couple of months: I shorted out a conference room and melted the floor a little (the wire caught fire) The second charger (also a Dell original) died, taking the power strip with it I'm wondering: Is it normal for laptop chargers to spark when plugged in? Specifically new, original Dell chargers Is there a "correct" way to plug / unplug chargers? Do I need to first unplug it from the wall and then from the laptop / do I need to first plug it into the wall and then into the laptop? May the problem be caused by the fact that I leave sometimes the charger plugged into the wall without connecting the laptop for longer periods of time (up to a day)? PS. I'm talking about Europe, so 220V and this happens in many places (at home, at my parents, at work, in hotels I trave to, etc)

    Read the article

  • When I try to install Windows 7 on dell inspiron 1420 which came with Ubuntu freezes at the beginnin

    - by draganstankovic
    I have searched many forums and tried a lot of suggested solutions but nothing works. I am sure that installation disk is ok cause it worked before (I was able to install Windows7 on my other notebook - MSI). What happens is: I boot with installation CD, it says 'Windows is loading files...' Then it says Starting Windows (mouse laser works at that moment). Then I get the screen with window which has a title "Install Windows" with options to choose language, keyboard, etc. and asking me to click next. But, the problem is that at that moment mouse and keyboard don't work at all. Mouse's laser is turned off, and if I press CAPS LOCK on keyboard it doesn't turn the LED on. Do you have any suggestions? Thanks!

    Read the article

  • Laptop monitor stopped working and can't be re-enabled on a Dell Latitude E6410

    - by xektrum
    I'm using Ubuntu 12.04 (upgraded from 11.10), everything seemed to work fine until today when my laptop monitor suddenly stopped working. Here are the facts: My laptop is a Dell Latitude E6410, Intel graphics. External Monitor is attached through a docking station. Everything worked fine for about 6-7 month, then upgraded to 12.04 Issue started today after a week of upgrade. I think the issue started after I ran CounterStrike 1.6, both monitors blinked and then only the attached monitor which is connected to a docking station continued to work I thought at first that was a transient issue but then I've rebooted, removed the battery but the same happens. Laptop Monitor and external monitor work fine up to login screen, but after I login it goes black Whenever I try to re-enable laptop monitor from Display Manager I get errors: The selected configuration for displays could not be applied could not set the configuration for CRTC 63 Not sure what technical details are required but here are some: $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected (normal left inverted right x axis y axis) 1440x900 60.0 + 40.0 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) $ tail /var/log/Xorg.0.log [ 8367.132] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.132] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy I'm using gnome-shell, and the only ways I've been able to get both display working have been: 1) Booting with laptop disconnected from docking and then re attach external with VGA instead of DVI, but only worked for a session. 2) Removing xserver-xorg-video-intel, but then I gnome-shell is gone as well as dri I would appreciate any suggestions. Regards, ============================= WORKAROUND FOUND ============================= So I have tried few things and here is what worked: I've installed a newer version of xserver-xorg-video-intel (2.19 vs 2.17) from ppa:xorg-edgers/ppa, it didn't work at first, it was only showing low graphics mode, so I tried with a different linux-image 3.0.0-19-generic-pae instead of 3.2.0-24-generic-pae, which I believe is 12.04 precise default, then everything started to work again, Now I've installed 3.4.0-1-generic-pae from same ppa and everything goes flawless so I believe the issue is either with linux-image 3.0.0-19-generic-pae or xserver-xorg-video-intel 2.17. Hope this helps someone in the future. PS: Now xrandr shows multiple modes for my laptop monitor $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 303mm x 189mm 1440x900 60.0*+ 59.9 40.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis)

    Read the article

  • Not recognizing second monitor after hibernate (Windows 7, Dell D630 laptop)

    - by Brooks Moses
    I have a Dell Latitude D630 laptop which I've recently updated to Windows 7 64-bit. (The Dell site confirms that it's Windows-7-compatible.) Normally it lives in a docking station with a second monitor connected to the DVI port on the docking station, and I use the second monitor in a multi-monitor configuration with the laptop screen. Sometimes I undock the laptop and use it separately. Here's the problem: If I hibernate the laptop while undocked, and then power it back up in the docking station, it does not recognize the second monitor. By which I mean that not only does it not share the desktop onto the second monitor, but if I go into the control panel for display settings and press "Detect", it does not even detect the existence of the second monitor. I can tell it to "use the VGA port anyway" for a second monitor, but the monitor is connected to a DVI port on the docking station, so that doesn't do anything useful. If I entirely reboot the laptop while it's connected to the docking station, it has no problem recognizing the second monitor and using it. But then, if I hibernate, undock, de-hibernate while undocked and rehibernate, and then re-dock and de-hibernate, it's back to not recognizing the second monitor again. I'm reasonably certain that this is not a limitation of the hardware; this worked fine on Windows XP. I'm currently using the Windows 7 driver for my video card. I attempted to use the video driver from the Dell website for this laptop, but Dell only provides Vista 64-bit drivers, not Windows 7 64-bit drivers. Their "Windows 7 compatibility" page suggests that the Vista drivers should work, but when I attempted to install the driver, it gave me a "this operating system not supported" error and refused to install. Any further ideas?

    Read the article

  • How do you get - Better than 1024x768 Driver for 64 bit Dell PowerEdge Server

    - by tinyJoe
    How do you get better than 1024x768 resolution? Just installed MS Server 2008 64bit on a Dell PowerEdge 64bit box (works OK - Previously running MS Server 2003 32bit) After install - gives a a max resultion of 1024x768 I want to change the reslution to 1280x1024 (Same LCD Worked OK on server 2003) When I down load a driver I get a messeage "Radeon 7000 does not recognise driver" Also have Have a new LG W1042 I'd like to use. This goes up to 1440

    Read the article

  • Windows Network Load Balancing on ESX Cluster with Dell PowerConnect stacks

    - by dunxd
    We recently switched out our Cisco 6500 core switch for a pair of Dell PowerConnect 6248 stacks. Since then, our Network Load Balanced Sharepoint, which runs on two virtual machines on an ESX cluster has been behaving very poorly. The symptoms are that opening and saving documents stored in sharepoint takes a very very long time. There are no errors showing up on the Sharepoint servers or SQL server, just a lot of annoyed users. Initially I thought there was no way NLB could cause this, but as soon as we repointed the DNS records for our intranet to the ip address of one of the web front ends, the problems disappeared. We suspect there is an issue related to multicast in the Dell configs - NLB is configured for multicast, but not IGMP. Has anyone got a similar set up to us and fixed this sort of issue? Sharepoint on VMware ESX, with Dell PowerConnect switches.

    Read the article

  • Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

    - by yothenberg
    I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

    Read the article

  • How can I adapt a Dell 2001FP stand for use on newer Dell monitors?

    - by user26453
    I find myself really disappointed with how little vertical adjustment newer Dell LCD's have. I retiring a malfunctioning Dell 2001FP. The stand on the 2001FP allows over 6 inches of vertical adjustment. Compare this to my newer monitors, a 2005FP and a SW22209, both of which allow at most 2 inches of vertical adjustment. So while the Dell 2001FP monitor is shot, the stand is not. Is there anyway to fit the stand onto the SW2209 or the 2005FP? The 2001FP stand seems to have an odd plate with three tabs on the top edge. Can I replace this?

    Read the article

  • Upgrade the Graphics Card for a Dell Dimension 3100

    - by Pat Foran
    Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

    Read the article

  • Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

    - by yothenberg
    Hi, I have a dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas? Thanks, Mark

    Read the article

  • Dell Powervault MD3000 - Not sharing Files between servers

    - by Kevin
    I'm a developer who has to set up a Dell Powervault MD3000 due to lack of resources. I have connected the Powervault to 2 Dell 2950 servers via the SAS cables. I performed the setup using Dell's MD Storage Manager software (4 disks, RAID 5 with hot spare). Then I added the disks using Windows 2003 disk management (Basic, not dynamic disk and formatted with NTFS). When I add files to the array from one server, they are not visible on the other server (and vice-versa). Is the error in the windows disk management configuration?

    Read the article

  • IPMI sdr entity 8 (memory module) only showing 3 records?

    - by thinice
    I've got two Dell PE R710's - A has a single socket and 3 DIMMs in one bank B has both sockets and 6 (2 banks @ 3 DIMMs) filled The output from "ipmitool sdr entity 8" confuses me - according to the OpenIPMI documentation these are supposed to represent DIMM slots. Output from A (1 CPU, 3 DIMMS, 1 bank.): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 27 degrees C Temp | 0Bh | ns | 8.1 | Disabled Temp | 0Ch | ucr | 8.1 | 52 degrees C Output from B (2 CPUs, 3 DIMMS in both banks, 6 total): ~#: ipmitool sdr entity 8 Temp | 0Ah | ok | 8.1 | 26 degrees C Temp | 0Bh | ok | 8.1 | 25 degrees C Temp | 0Ch | ucr | 8.1 | 51 degrees C Now, I'm starting to think this output isn't DIMMS themselves, but maybe a sensor for each bank and something else? (Otherwise, shouldn't I see 6 readings for the one with both banks active?) The CPU's aren't near 50 deg C, so I doubt the significantly higher reading is due to proximity - Is anyone able to explain what I'm seeing? Does the output from my ipmitool sdr entity 8 -v here on pastebin seem to hint at different sensors? The sensor naming conventions are poor - seems like a dell thing. Here is output from racadm racdump

    Read the article

  • Getting "boot error" when trying to boot from USB

    - by Jon Ball
    I'm wanting to try out Ubuntu, so followed the instructions for how to install Ubuntu onto a USB. I downloaded the .iso file, then the pendrivelinux 3 part process to make the USB bootable. I can see what looks like a full list of files on the USB (including the wubi.exe application and the syslinux folder). When I try to restart the computer with the USB in, I get the Dell start up screen, and then a black screen with "Boot Error" in the top right hand corner. Setup options (default) are to boot from Removable Device, then Hard Disc. USB is brand new, straight out of the packet. Computer: Dell Inspiron 530S BIOS: 1.0.13 OS: Windows Vista Home Edition USB: EMTEC 8Gb, formatted to FAT32 I've tried some of the tips in other help topics (holding down CTRL key while restarting, removing all other USB devices). I tried to reformat the USB to something other than FAT32, but my only other options were NTFS or exFAT (not FAT16 which was suggested in another topic).

    Read the article

  • I can't find my "WIndows 8" Partition

    - by abhi_nash
    My girlfriend had her Dell Pre-Installed with Windows Vista when she bought it,then she upgraded it to Windows 7 and then 8.Since she wanted an Operating System which is fast and powerful i suggested Ubuntu for her.She runs a Dell Inspiron 1420 with 2 gigs of ram and an Nvdia 8400M GS,though the laptop is a bit old,it does her things like a dream. So,I have used a Flash Drive(8 Gigs) to install Ubuntu 13.04 on her system and used "Overwrite the Windows 8 OS".Then afterwards when I logged in I can't find any of her files which was on her WIndows 8 installation. Anyone know a work around with this?!

    Read the article

  • Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04

    - by fo_x86
    I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >