Search Results

Search found 1115 results on 45 pages for 'dos'.

Page 21/45 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Employer purchased a Macbook for me, as a programmer what do I need to do to get my environment setup?

  - by Chris

  I come from growing up on dos/windows and the more I got into programming and development the more I invested time/effort into linux distributions. I had a choice between an IBM and a Macbook. I went with the Macbook to get some experience but I am not really sure where to start? I find myself wanting to install virtualbox and boot up linux. Any advice for a new Mac user who wants to get back up to speed with programming efficiently?

  Read the article

• Why doesn't Ubuntu detect my second hard drive?

  - by user93179

  I am new to Linux and to Ubuntu, I was wondering, I have two hard drives setup in SATA ports (non-raid, at least I don't think they are). I installed ubuntu unto the drives fresh without any previous versions or windows at all. However when I got the Ubuntu 12.04 LTS working, all I see is 1 x 120 gigabyte harddrive. Also, not sure if this is important or not, my hard drives are SSD. My computer specs are Asus P9Z77-V-LK Nvidia Geforce GTX 660 TI Intel i5 3570k 3.4 /proc/partitions shows: major minor #blocks name 8 0 117220824 sda 8 1 117219328 sda1 8 16 117220824 sdb 8 17 96256 sdb1 8 18 108780544 sdb2 8 19 8342528 sdb3 11 0 1048575 sr0 and ls -l /sys/block/ | grep -v /virtual/: lrwxrwxrwx 1 root root 0 Sep 27 17:26 sda - ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Sep 27 17:26 sdb - ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Sep 27 22:26 sdc - ../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Sep 27 22:04 sr0 - ../devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sr0 sudo file -s /dev/sd*: /dev/sda: x86 boot sector; partition 1: ID=0x7, starthead 32, startsector 2048, 234438656 sectors, code offset 0xc0, OEM-ID " ?", Bytes/sector 190, sectors/cluster 124, reserved sectors 191, FATs 6, root entries 185, sectors 64514 (volumes 32 MB) , physical drive 0x7e, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled /dev/sdb2: Linux rev 1.0 ext4 filesystem data, UUID=387761ac-5eba-4d0f-93ba-746a82fb541d (needs journal recovery) (extents) (large files) (huge files) /dev/sdb3: data /dev/sdc: x86 boot sector; partition 1: ID=0xc, active, starthead 0, startsector 8064, 30473088 sectors, code offset 0xc0 /dev/sdc1: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 64, reserved sectors 944, Media descriptor 0xf8, heads 128, hidden sectors 8064, sectors 30473088 (volumes 32 MB) , FAT (32 bit), sectors/FAT 3720, Backup boot sector 8, serial number 0xf90c12e9, label: "KINGSTON " /dev/sda1: x86 boot sector, code offset 0x52, OEM-ID "NTFS ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 2048, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled Any help would be greatly appreciated! Thanks Another thing I noticed is, when i use gparted to locate my drives, it seems that sda1 is my second drive that I am not detecting when I boot up and my ubuntu + FAT Boot files are installed in sdb1

  Read the article

• L'Internet des Objets suscite plusieurs interrogations chez les spécialistes, selon une étude

  La révolution de l'Internet des Objets aura-t-elle lieu ? Certains spécialistes tournent le dos à l'IoT vu les différentes inquiétudes qu'il suscite L'Internet des objets (Internet of Things, IoT) serait-il en train de vaciller ? C'est l'une des questions à laquelle a tenté de répondre une étude de PewResearch. Il semblerait alors que les avis sur la tendance IoT sont plus partagé qu'auparavant, la faute à une remise en question de certains grands noms de l'IT.En effet, même si certains d'entre...

  Read the article

• Running CLOC (count lines of code) on Windows...or alternative

  - by Chelonian

  I'm trying to use CLOC on Windows (XP) to count lines of code, and I can't get it to work. I downloaded the latest Win installer for CLOC 1.5.6, ran it (which caused a "DOS" window to open, scroll with text rapidly, then close before I could read anything) and then wrote cloc at the cmd prompt...and Windows doesn't recognize it as a command. Or if there is another easy-to-use lines of code counter that one could recommend (that runs on Windows), I'd be happy to try that.

  Read the article

• Multiple vulnerabilities in Ghostscript

  - by chandan

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2009-4270 Denial of Service (DoS) vulnerability 9.3 Ghostscript Solaris 10 SPARC: 122259-05 X86: 122260-05 CVE-2010-1628 Memory Corruption vulnerability 9.3 CVE-2010-1869 Buffer Overflow vulnerability 9.3 CVE-2010-2055 Arbitrary Code Execution vulnerability 7.2 This notification describes vulnerabilities fixed in third-party components that are included in Sun's product distribution.Information about vulnerabilities affecting Oracle Sun products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• 10 Ways to Do On-Page Search Engine Optimization

  There are basic things that you need to put in mind while making Search Engine Friendly Websites. With this method you will learn the dos and don't s of on page Search Engine Optimization. It's important to note that Search Engines see a web-page differently from how a human web visitor would see it.

  Read the article

• Tips on Getting Top Ranks in Google

  Getting top ranks on Google can only be achieved by following all of the principals and guidelines contained in Google's Webmaster Guidelines. This constantly updated publication available for free from Google provides any serious website marketer with all of the basic dos and don'ts for optimizing your web site for ranking highly for your targeted keywords.

  Read the article

• CVSROOT problem because of username string

  - by jatanp

  Hi, I have always been SVN user but currently I have to use CVS as the source repository. I am quite new to CVS and really got confused many a times (reason being I always tried to access CVS like SVN !) However now I am really stuck in one problem wherein I am not able to do any cvs operations through cygwin. Actually I have checked out the code using WinCVS and while doing that it created the CVSROOT as following, :pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository However whenever I try to use cvs command in cygwin (after setting CVSROOT variable using export) it fails with following error: cvs update: Unknown option (`username') in CVSROOT. cvs update: in directory .: cvs update: ignoring CVS/Root because it does not contain a valid root. cvs update: Unknown option (`username') in CVSROOT. cvs [update aborted]: Bad CVSROOT: `:pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository'. However the command works fine, if invoked through dos command prompt. I got to know that on DOS prompt, cvs command is provided by CVSNT whereas in cygwin it's some different package. Please let me know where I have made a mistake and how it can be corrected ! I need cvs to work inside cygwin for some scripting purpose.

  Read the article

• How to add a Linux Partition on FreeBSD

  - by Ömer

  Today I installed FreeBSD 9.0 PPC on my Mac mini G4 with 40GB HDD. During installation, (using the FSBD utility 'gpart') I have allocated a total of about 23GB for FreeBSD leaving 17GB totally free (neither partitioned, nor formatted) for a later Linux installation. Now, when try to install Linux (Ubuntu 10.10 PPC) on the remaining 17GB, the Linux/Ubuntu installer (or Linux's Disk Utility for the same matter) wants presumably a linux partition and when I try to add a (Linux) partition on that area using Linux DU it fails with this message: Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/hda, start=23363101696, size=16644660224, type= Entering MS-DOS parser (offset=0, size=40007761920) No MSDOS_MAGIC found Exiting MS-DOS parser Entering Apple parser Mac MAGIC found, block_size=512 map_count = 17 Leaving Apple parser Apple partition table detected containing partition table scheme = 2 got it Error: The partition's data region doesn't occupy the entire partition. ped_disk_new() failed Now, I'm trying to add a Linux partition on FreeBSD running on the harddisk. I use seemingly most suitable tool for this job: gpart. Here is the 'gpart show ad0' But it seems unable to add a Linux partition because "man gpart" doesn't list either "Linux Partition" nor anything like Ext2 or Ext3/Ext4. The closest thing to Linux Partition in gpart is "mbr" but it doesn't work: #gpart add -t mbr ado So, how to add properly a Linux Partition on FreeBSD? Thanks.

  Read the article

• CentOS security for lazy admins

  - by Robby75

  I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

  Read the article

• Concerns about Apache per-Vhost logging setup

  - by etienne

  I'm both senior developer and sysadmin in my company, so i'm trying to deal with the needs of both activities. I've set up our apache box, wich deals with 30-50 domains atm (and hopefully will grow larger) and hosts both production and development sites, with this directory structure: domains/ domains/domain.ext/ #FTPS chroot for user domain.ext domains/domain.ext/public #the DocumentRoot of http://domain.ext domains/domain.ext/logs domains/domain.ext/subdomains/sub.domain.ext domains/domain.ext/subdomains/sub.domain.ext/public #DocumentRoot of http://sub.domain.ext Each domain.ext Vhost runs with his dedicated user and group via mpm-itk, umask being 027, and the logs are stored via a piped sudo command, like this: ErrorLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_error.log" CustomLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_access.log" combined Now, i've read a lot about not letting the logs out of a very restricted directory, but the developers often need to give a quick look to a particular subdomain error log, and i don't really want to give them admin rights to look into /var/logs. Having them available into the ftp account is REALLY handy during development stages. Do you think this setup is viable and safe enough? To me it is apparently looking good, but i'm concerned about 3 security issues: -is the sudo pipe enough to deal with symlink exploits? Any catches i'm missing? -log dos: logs are in the same partition of all domains. got hundreds of gigs, but still, if one get disk-space dos'd, everything will break. Any workaround? Will a short timed logrotate suffice? -file descriptors limits: AFAIK the default limit for Apache on Ubuntu Server is currently 8192, which should be plenty enough to handle 2 log files per subdomain. Is it? Am i missing something? I hope to read some thoughts on the matter!

  Read the article

• Need to boot into chkdsk from USB on Windows netbook

  - by Gaz Davidson

  While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

  Read the article

• Using Varnish (only) for DDoS mitigation

  - by Martin Kanters

  My VPS is suffering from a (D)DoS doing a SYN flood with spoofed IPs. I'm right now searching from ways how to be able to defend (at least a bit) against it. It's running a DirectAdmin apache2 webserver. Mainly used for serving PHP and MySQL. We are using CloudFlare, which are saying that they are able to mitigate (D)DoS at some level, now the attacker knows our real IP address, so CloudFlare isn't helping a bit. I've done some searching on the net and found out about enabling SYN cookies, to defend against it. I've checked my settings and it seems it was enabled all along. I've also read about that Varnish is able to defend against SYN flooding and Slowloris attacks, now I'm pretty interested in using that. The thing is that CloudFlare is already caching a lot from us, and I don't wish to spend too much resources on Varnish. Is it possible and smart to set up Varnish only for the better handling of requests? Are there perhaps better ways which I've missed? Thanks in advance, Martin

  Read the article

• Windows 2008 server smart card security module problem

  - by chris13work

  Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

  Read the article

• Windows 2008 server smart card security module problem

  - by chris13work

  Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

  Read the article

• Kindly guide me to buy a new laptop [on hold]

  - by Its me 007

  I am from India. I want to buy a new laptop. Shortlisted few but confused between which processor,Chip set and Graphics will be the best suited for my requirements. NOTE: NOT ABLE TO POST THE LINKS YOU WILL HAVE TO COPY PASTE IT. SORRY. 1) HP Pavilion 15-N004TX - 4th Gen CI5 - 4200U/4GB RAM/500 GB HDD/ 1GB Radeon Graphic - Rs 39990 www.homeshop18.com/hp-pavilion-15-n004tx-laptop-4th-gen-intel-core-i5-4200u-4gb-500gb-15-6-linux-silver-black/computers-tablets/laptops/product:30989197/cid:16317/ 2) Lenovo Essential G510 (59-398452) - 4th Gen Ci5 4200M/ 4GB/ 500 GB/Win8/2GB Graph ATI Sunpro 8570 - Rs 44969 www.flipkart.com/lenovo-essential-g510-59-398452-laptop-4th-gen-ci5-4gb-500gb-win8-2gb-graph/p/itmdp26eprwf5k5v?gclid=CMnh99GA2LoCFaRU4godNiUAGQ&semcmpid=sem_7847244212_laptopsnew_goog&tgi=sem%2C1%2CG%2C7847244212%2Cg%2Csearch%2C%2C24387103114%2C1t1%2Cb%2C%2Blenovo+%2Bg510%2F59+%2B398452%2Cc%2C%2C%2C%2C%2C%2C%2C2 3) HP Pavilion G6-2303TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 500GB/ DOS/ 1GB Graph) - Rs 40500 www.flipkart.com/hp-pavilion-g6-2303tx-laptop-3rd-gen-ci5-4gb-500gb-dos-1gb-graph/p/itmdm6yzh4gr4cxd?pid=COMDM6YHWMGDRDEZ&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 4) HP Pavilion 15-E039TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 1TB/ Win8/ 2GB Graph) - Rs 46690 www.flipkart.com/hp-pavilion-15-e039tx-laptop-3rd-gen-ci5-4gb-1tb-win8-2gb-graph/p/itmdn4d9wykhdcpz?pid=COMDN4CZGFMGJNTN&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 Now I am confused between: Which Processor and chipset is best? How much graphic card is enough? (Not a gamer) Is any of this laptop future proof i.e. it should at least support upcoming latest programming softwares which eats more processor and memory. Laptop will be mainly used for multiprocessing.It should be at least capable for following: Visual Studio 2012 and the upcoming versions for at least 4 years SQL server 2008 R2 and above Sharepoint Blend Photoshop Kindly suggest. If anyone know any good laptop with good configuration in the 50k budget kindly suggest. Thanks in advance.

  Read the article

• Windows Network File Transfer to Samba server: “Are you sure you want to copy this file without its properties?”

  - by jimp

  I am transferring a lot of files to a new NAS based on OpenMediaVault, with the Samba 3.5.6 service running. I am transferring from Windows 7 64-bit to the NAS, and on some media files Windows is prompting about losing some property data across the transfer. I have never seen this before when transferring to Samba boxes I have built myself (vs this turnkey solution), so I'm guessing there must be a Samba setting I can change to preserve the file properties in question instead of permanently losing whatever they contain (Date Taken? Exposure? Flash Fired? etc). Or maybe I've just never encountered this before; I'm really not sure. I tried adding ea support = yes and store dos attributes = yes to the [global] section, but the problem remains. The Linux file system is ext4 mounted with user_xattr (full options: defaults,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) as Samba requires. Any ideas would be greatly appreciated. Thank you! Samba config: [global] workgroup = WORKGROUP server string = %h server include = /etc/samba/dhcp.conf dns proxy = no log level = 2 syslog = 2 log file = /var/log/samba/log.%m max log size = 1000 syslog only = yes panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes socket options = TCP_NODELAY IPTOS_LOWDELAY guest account = nobody load printers = no disable spoolss = yes printing = bsd printcap name = /dev/null unix extensions = yes wide links = no create mask = 0777 directory mask = 0777 use sendfile = no null passwords = no local master = yes time server = yes wins support = yes ea support = yes store dos attributes = yes Note: I found this related question, but it explains the loss due to the user trying to transfer from NTFS to FAT32.

  Read the article

• Can't Install Win2k8 On KVM - Classic 0x80070013 error

  - by javano

  I am trying to install Win2k8 Std as a KVM guest on Debian Squeeze. As you can see from these screen shots; No drives are detected (I have blanked out a 20GB image for testing) - screenshot1 I am using this driver CD: - screenshot2 I have signed the Win7 driver (I assume this was the most appropriate one?) - screenshot3 I can now see an unpartitioned drive - screenshot4 But I can't create a new partition on here, getting the error code 0x80070013 - screenshot5 I have had this error code before but only on a physical server. If I remember correctly it was complaining because the disks were partitioned as GPT (because it was a server that was being re-purposed) so repartitioning with an MS-DOS table fixed that. This is a blank disk image though. What is wrong here, and how can I correct this? Thank you. UPDATE I have booted the VM with a Gparted-Live disk and formatted this volume with an MS-DOS partitioning scheme, and a single 20GB NTFS file system. Now when I boot the Win2k8 CD, load my drivers, I get a different error. As you can see at the bottom of screenshot6 "Windows cannot be installed on this hard drive space. Windows must be installed to a partition formatted as NTFS". Clicking format produces the error (0x80004005) on the screen, so I think this is still a driver issue because Windows can see the drive but not interact with it properly. Is that insane thinking?

  Read the article

• "Access is Denied" when executing application from Command Prompt

  - by xpda

  Today when I tried to run an old DOS utility from the XP Command prompt, I got the message "Access is Denied." Then I found that most of the DOS utilities would not run, even though I have "full control" over them. They worked just fine a few weeks ago, and I have not made any OS changes other than Windows Upgrades. Then I tried running edlin.exe and edit.com from the Windows\system32 folder. Same result - "Access is Denied." I tried running these applications from Windows Explorer and got the message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I am logged in as a member of Administrators and have full control over these files. I tried logging in as THE Administrator, with no change. I checked the security settings on the files, and have full control over all of them. I have tried copying the files to different drives, booting in safe mode, and running without antivirus and firewall, all with no change. Does anybody know what could cause this?

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Is there a Generic USB TouchScreen Driver 12.04?

  - by lbjoum

  Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

  Read the article

• convert pixels into image

  - by Zeta Op

  what i am trying to do is to convert a pixel from a video cam, into an image to expalin it better imagine a 3d model so.. the pixels would be each polying, and i want to do is to conver each polyigon into an image. what i have so far is this ** import processing.video.*; PImage hoja; Capture cam; boolean uno, dos, tres, cuatro; import ddf.minim.*; Minim minim; AudioPlayer audio; float set; void setup() { //audio minim = new Minim(this); // audio = minim.loadFile("audio"); // audio.loop(); // uno=false; dos=false; tres=false; cuatro=true; size(640, 480); hoja=loadImage("hoja.gif"); cam = new Capture(this, width, height); cam.start(); } void draw() { if (cam.available() == true) { cam.read(); if (uno==true) { filtroUno(); image(cam, 0, 0, 640, 480); } if (dos==true) { filtroDos(); } if(tres==true){ filtroTres(); } if(cuatro==true){ filtroCuatro(); image(cam, set, 0,640,480); } } // The following does the same, and is faster when just drawing the image // without any additional resizing, transformations, or tint. //set(0, 0, cam); } void filtroUno() { cam.loadPixels(); hoja.loadPixels(); for (int i=0;i<cam.pixels.length;i++) { if (brightness(cam.pixels[i])>110) { cam.pixels[i]=color(0, 255, 255); } else { cam.pixels[i]=color(255, 0, 0); } } for (int i=0;i<cam.width;i+=10) { for (int j=0;j<cam.height;j+=10) { int loc=i+(j*cam.width); if (cam.pixels[loc]==color(255, 0, 0)) { for (int x=i;x<i+10;x++) { for (int y=j;y<j+10;y++) { // println("bla"); int locDos=i+(j*cam.width); cam.pixels[locDos]=hoja.get(x, y); } } } } } cam.updatePixels(); } ** the broblem is that each pixel is creating me a matrix, so.. is not recreating what id that to do. i had the method filtroUno but it wasn't showing ok.. and was the result void filtroUno() { cam.loadPixels(); hoja.loadPixels(); for (int i=0;i<cam.pixels.length;i++) { if (brightness(cam.pixels[i])>110) { cam.pixels[i]=color(0, 255, 255); } else { cam.pixels[i]=color(255, 0, 0); } } for (int i=0;i<cam.width;i+=10) { for (int j=0;j<cam.height;j+=10) { int loc=i+j*hoja.width*10; if (cam.pixels[loc]==color(255, 0, 0)) { for (int x=i;x<i+10;x++) { for (int y=j;y<j+10;y++) { // println("bla"); int locDos=x+y*hoja.height*10; cam.pixels[locDos]=hoja.get(x, y); } } } } } cam.updatePixels(); } i hope you can help me thanks note: each red pixel should be the gif image the imge size is 10x10

  Read the article

• Programação paralela no .NET Framework 4 – Parte I

  - by anobre

  Introdução O avanço de tecnologia nos últimos anos forneceu, a baixo custo, acesso  a workstations com inúmeros CPUs. Facilmente encontramos hoje máquinas clientes com 2, 4 e até 8 núcleos, sem considerar os “super-servidores” com até 36 processadores :) Da wikipedia: A Unidade central de processamento (CPU, de acordo com as iniciais em inglês) ou o processador é a parte de um sistema de computador que executa as instruções de um programa de computador, e é o elemento primordial na execução das funções de um computador. Este termo tem sido usado na indústria de computadores pelo menos desde o início dos anos 1960[1]. A forma, desenho e implementação de CPUs têm mudado dramaticamente desde os primeiros exemplos, mas o seu funcionamento fundamental permanece o mesmo. Fazendo uma analogia, seria muito interessante delegarmos tarefas no mundo real que podem ser executadas independentemente a pessoas diferentes, atingindo desta forma uma  maior performance / produtividade na sua execução. A computação paralela se baseia na idéia que um problema maior pode ser dividido em problemas menores, sendo resolvidos de forma paralela. Este pensamento é utilizado há algum tempo por HPC (High-performance computing), e através das facilidades dos últimos anos, assim como a preocupação com consumo de energia, tornaram esta idéia mais atrativa e de fácil acesso a qualquer ambiente. No .NET Framework A plataforma .NET apresenta um runtime, bibliotecas e ferramentas para fornecer uma base de acesso fácil e rápido à programação paralela, sem trabalhar diretamente com threads e thread pool. Esta série de posts irá apresentar todos os recursos disponíveis, iniciando os estudos pela TPL, ou Task Parallel Library. Task Parallel Library A TPL é um conjunto de tipos localizados no namespace System.Threading e System.Threading.Tasks, a partir da versão 4 do framework. A partir da versão 4 do framework, o TPL é a maneira recomendada para escrever código paralelo e multithreaded. http://msdn.microsoft.com/en-us/library/dd460717(v=VS.100).aspx Task Parallelism O termo “task parallelism”, ou em uma tradução live paralelismo de tarefas, se refere a uma ou mais tarefas sendo executadas de forma simultanea. Considere uma tarefa como um método. A maneira mais fácil de executar tarefas de forma paralela é o código abaixo: Parallel.Invoke(() => TrabalhoInicial(), () => TrabalhoSeguinte()); O que acontece de verdade? Por trás nos panos, esta instrução instancia de forma implícita objetos do tipo Task, responsável por representar uma operação assíncrona, não exatamente paralela: public class Task : IAsyncResult, IDisposable É possível instanciar Tasks de forma explícita, sendo uma alternativa mais complexa ao Parallel.Invoke. var task = new Task(() => TrabalhoInicial()); task.Start(); Outra opção de instanciar uma Task e já executar sua tarefa é: var t = Task<int>.Factory.StartNew(() => TrabalhoInicialComValor());var t2 = Task<int>.Factory.StartNew(() => TrabalhoSeguinteComValor()); A diferença básica entre as duas abordagens é que a primeira tem início conhecido, mais utilizado quando não queremos que a instanciação e o agendamento da execução ocorra em uma só operação, como na segunda abordagem. Data Parallelism Ainda parte da TPL, o Data Parallelism se refere a cenários onde a mesma operação deva ser executada paralelamente em elementos de uma coleção ou array, através de instruções paralelas For e ForEach. A idéia básica é pegar cada elemento da coleção (ou array) e trabalhar com diversas threads concomitantemente. A classe-chave para este cenário é a System.Threading.Tasks.Parallel // Sequential version foreach (var item in sourceCollection) { Process(item); } // Parallel equivalent Parallel.ForEach(sourceCollection, item => Process(item)); Complicado né? :) Demonstração Acesse aqui um vídeo com exemplos (screencast). Cuidado! Apesar da imensa vontade de sair codificando, tome cuidado com alguns problemas básicos de paralelismo. Neste link é possível conhecer algumas situações. Abraços.

  Read the article

• ASP.NET MVC, Web API, Razor, e Open Source (Código Aberto)

  - by Leniel Macaferi

  A Microsoft tornou o código fonte da ASP.NET MVC disponível sob uma licença open source (de código aberto) desde a primeira versão V1. Nós também integramos uma série de grandes tecnologias de código aberto no produto, e agora entregamos jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js e JSON.NET como parte integrante dos lançamentos da ASP.NET MVC. Estou muito animado para anunciar hoje que também iremos liberar o código fonte da ASP.NET Web API e ASP.NET Web Pages (também conhecido como Razor) sob uma licença open source (Apache 2.0), e que iremos aumentar a transparência do desenvolvimento de todos os três projetos hospedando seus repositórios de código no CodePlex (usando o novo suporte ao Git anunciado na semana passada - em Inglês). Isso permitirá um modelo de desenvolvimento mais aberto, onde toda a comunidade será capaz de participar e fornecer feedback nos checkins (envios de código), corrigir bugs, desenvolver novos recursos, e construir e testar os produtos diariamente usando a versão do código-fonte e testes mais atualizada possível. Nós também pela primeira vez permitiremos que os desenvolvedores de fora da Microsoft enviem correções e contribuições de código que a equipe de desenvolvimento da Microsoft irá rever para potencial inclusão nos produtos. Nós anunciamos uma abordagem de desenvolvimento semelhantemente aberta com o Windows Azure SDK em Dezembro passado, e achamos que essa abordagem é um ótimo caminho para estreitar as relações, pois permite um excelente ciclo de feedback com os desenvolvedores - e, finalmente, permite a entrega de produtos ainda melhores, como resultado. Muito importante - ASP.NET MVC, Web API e o Razor continuarão a ser totalmente produtos suportados pela Microsoft que são lançados tanto independentemente, bem como parte do Visual Studio (exatamente da mesma maneira como é feito hoje em dia). Eles também continuarão a ser desenvolvidos pelos mesmos desenvolvedores da Microsoft que os constroem hoje (na verdade, temos agora muito mais desenvolvedores da Microsoft trabalhando na equipe da ASP.NET). Nosso objetivo com o anúncio de hoje é aumentar ainda mais o ciclo de feedback/retorno sobre os produtos, para nos permitir oferecer produtos ainda melhores. Estamos realmente entusiasmados com as melhorias que isso trará. Saiba mais Agora você pode navegar, sincronizar e construir a árvore de código fonte da ASP.NET MVC, Web API, e Razor através do website http://aspnetwebstack.codeplex.com.  O repositório Git atual no site refere-se à árvore de desenvolvimento do marco RC (release candidate/candidata a lançamento) na qual equipe vem trabalhando nas últimas semanas, e esta mesma árvore contém ambos o código fonte e os testes, e pode ser construída e testada por qualquer pessoa. Devido aos binários produzidos serem bin-deployable (DLLs instaladas diretamente na pasta bin sem demais dependências), isto permite a você compilar seus próprios builds e experimentar as atualizações do produto, tão logo elas sejam adicionadas no repositório. Agora você também pode contribuir diretamente para o desenvolvimento dos produtos através da revisão e envio de feedback sobre os checkins de código, enviando bugs e ajudando-nos a verificar as correções tão logo elas sejam enviadas para o repositório, sugerindo e dando feedback sobre os novos recursos enquanto eles são implementados, bem como enviando suas próprias correções ou contribuições de código. Note que todas as submissões de código serão rigorosamente analisadas ??e testadas pelo Time da ASP.NET MVC, e apenas aquelas que atenderem a um padrão elevado de qualidade e adequação ao roadmap (roteiro) definido para as próximas versões serão incorporadas ao código fonte do produto. Sumário Todos nós da equipe estamos realmente entusiasmados com o anúncio de hoje - isto é algo no qual nós estivemos trabalhando por muitos anos. O estreitamento no relacionamento entre a comunidade e os desenvolvedores nos permitirá construir produtos ainda melhores levando a ASP.NET para o próximo nível em termos de inovação e foco no cliente. Obrigado! Scott P.S. Além do blog, eu uso o Twitter para disponibilizar posts rápidos e para compartilhar links. Meu apelido no Twitter é: @scottgu Texto traduzido do post original por Leniel Macaferi.

  Read the article

• 2 eventos, 2 países, 1 jornada.

  - by Noelia Gomez

  Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif";} El pasado Martes 23 de Octubre fue un día de gran actividad tanto en España como en Portugal. El Dialogo CxO , organizado por Econique, y en el que participó Oracle, tuvo lugar en Madrid en el Hotel Puerta de Ámerica. Este encuentro tenía como objetivo intercambiar opiniones sobre todos los aspectos relacionados con la gestión estratégica de clientes y el Contact Centre. En este marco, los asistentes tuvieron la oportunidad de realizar reuniones “one to one” con nuestros mejores expertos. Además Oracle presentó dos coloquios relacionados con la visión de las "Nuevas necesidades, estrategias y tendencias en la gestión del Marketing", de la mano de Gema Sebastian, Principal Sales Consultant de Oracle. En dichos coloquios los participantes de empresas, como Caprabo, Carrefour, Endesa, Jaguar Land Rover y Repsol (entre otros) trataron temas de máxima actualidad para los directivos de Marketing. Esta mesa redonda se centró sobre todo en el Marketing en redes sociales, compartiendo entre todos nuestra percepción de que es algo necesario pero que todavía el mercado no sabe muy bien cómo tratar. La escucha activa dentro de las redes y la posibilidad de reaccionar ante determinados factores se veía como un claro punto donde comenzar a trabajar de manera activa y donde Oracle puede ayudar. La experiencia de cliente fue otro de los puntos tratados en esta mesa, donde se dejó claro que ahora es el consumidor el que manda, el que quiere ver las cosas donde quiere y como quiere y que un mensaje de marketing ha de darse en el momento adecuado y aportando un valor real para que el consumidor lo acepte como algo interesante. Igualmente Oracle dispone de herramientas para hacer que esto sea posible. Por otro lado, en Lisboa, tenía lugar el Total Training 2012, una conferencia organizada por el Grupo IFE. En ella participaron más de 100 profesionales de los recursos humanos de las empresas más importantes de Portugal y tuvo como base de partida los conocimientos y experiencias, el intercambio de ideas y la discusión de oportunidades a las que actualmente se enfrentan los profesionales de este área. En este marco Oracle realizó una ponencia sobre “Los nuevos conceptos en RRHH”, de la mano de Julio Rodriguez, Principal Sales Consultant de Oracle, y que puso de manifiesto algunos conceptos tecnológicos relevantes para la gestión del talento que por su novedad, no eran muy conocidos por los profesionales de los RRHH cómo: · Saas (Software as a service) · BI (Business Intelligence) para RRHH · Social Networking y cómo integrarla dentro de la empresa · El mapa del talento, por fin fuera del Excel y en una aplicación · La movilidad en las aplicaciones de RRHH. Sin duda, esta fue una jornada cargada de intercambio de experiencias y de conocimientos para dos grandes áreas: los Recursos Humanos y la Gestión Estratégica del cliente. Si quieres saber más sobre la experiencia del cliente: Customer Concepts Magazine Customer Concepts Exchange in LinkedIn Customer Concepts Web TV Customer Experience @ Oracle.com Customer Experience Facebook Hub Customer Experience YouTube Channel Customer Experience Twitter Puede conocer más sobre HCM (Gestión de RRHH): Oracle Fusion Applications Oracle Fusion Human Capital Management Oracle PartnerNetwork Oracle Consulting Services Oracle Human Capital Management Blog Oracle HCM on Twitter Oracle HCM on Facebook

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >