Search Results

Search found 4690 results on 188 pages for 'k ran'.

Page 21/188 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• Windows 7 Install: No drives were found

  - by Albert Bori

  I was building a computer for my wife with an older SATA hard drive that I had lying around, and when attempting to do a new install of Windows 7 on it, the installer says: "No drives were found. Click Load Driver to provide a mass storage driver for installation." I ran the diskpart command: list volume, and it showed up as "Raw". So, I formatted it to NTFS and then it showed up as a healthy drive in diskpart. I also ran check disk on it with no errors. Windows 7 installer STILL can't find the drive. As far as BIOS settings, I have tried "Native IDE", AHCI, and Both AHCI/IDE mode (SATA slots 0-2 AHCI, 3-4 IDE). I tried all combinations... still "no drives were found". At this point, I'm just scratching my head. Using the installation dos window, I can see and talk to the drive just fine, but the installer just doesn't see it at all. I've even written folders and files to the drive, and it still "can't be seen". Any help would be great. Items of interest: Motherboard model: Gigabyte GA-A75M-UD2H - BIOS Version F5 (latest) Hard drive model: 80GB Seagate Barracuda 7200.7 ST380817AS (no other drives) Installing Windows 7 using a FAT32 formatted USB Drive, which I've used for other installs

  Read the article

• Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

  - by johnny

  This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

  Read the article

• Intel Ethernet Bottlenecking Internet?

  - by Donald Darma

  I'm having trouble with my internet speeds. So I just recent build a pc and everything is fine. I installed the Intel drivers and connected to the internet. It connects but I'm only half the speed I should be getting. My normal speed is 20mbps but speedtest.net is only showing 10. It can't be my ISP (which is TWC if anyone is asking) because my other devices like my laptop and my smartphone are showing 20 down. Heres my system: CPU: i5 4430 HSF: Stock cooler Mobo: Gigabyte Z87MX-D3H GPU: x2 MSI R7950-3GD5/OC BE RAM: Crucial Ballistix Tactical Tracer 8GB dual channel PSU: Silencer High Performance Power Supply 750 Watt 80+ (It's a subdivision of OCZ) HDD: Seagate Barracuda 7200RPM 3TB SSD: Samsung 840 Evo 120 GB Case: Corsair Obsidian 350D Edit: I am using the stock adapter that is on the motherboard. I know for a fact that the cable is good because I used it on my laptop and it ran fine. Its a CAT5E cable. I also ran IPERF and its giving me the same results, 10 mbps.

  Read the article

• HP Laptop recognizes hard drive just long enough to install windows

  - by Joe

  I have an HP laptop, DV6500 (CTO). It refused to boot one day, so I ran some diagnostics (a friend lent me "Hirens Boot Disk", "UBCD" and "PC DR 6"). Everything passed, except for the hdd. I replaced the HDD with a used drive of unknown condition. Installed windows with no problems. Installed the wireless driver, tried to reboot ... no luck. So I went to Best Buy, bought a brand new Western Digital 320gb HDD. Put it in the machine, installed windows (vista home premium). Installed the wired networking driver. Tried to reboot. No luck. Put the first hdd back in the machine, reinstalled windows. Started to install some drivers, went to reboot, and the machine won't come back to life. Put the second hdd in the machine, rinse wash and repeat. I've replaced the memory, even though it passed diagnostics. Problem exists with both brand new memory, and old memory. The BIOS recognizes the hard drive. The computer freezes directly after the bios splash screen, and there is no hard drive activity light. I've tried two linux live distros (gentoo and ubuntu). Neither would run on this laptop, but will on a different HP laptop. UBCD and Hirens Boot Disk both ran, as did PC Doctor 6 which refuses to test anything (gets stuck at "enumerating hard disks"). Is there anything else I can try?

  Read the article

• Are these three brand new sticks of RAM really dead?

  - by David Brown

  I'm working on a Dell Dimension 4700 desktop for a friend. It came with 512MB of DDR2 RAM (two sticks of 256MB). One morning, it started blue screening on startup with no helpful error messages. It refused to boot into any form of Windows installation, including Safe Mode, original recovery disk, and my custom Windows PE disk. It did boot into the Ultimate Boot CD, so I ran memtest86, which reported errors everywhere. I removed one stick of RAM and the system booted up just fine. I moved the remaining stick into each slot and the system continued to operate normally, so I came to the conclusion that the stick that I removed was dead. I ordered an exact replacement, along with 2 more sticks of 256MB DDR2 (again, exactly the same as the original), bringing the total system memory to 1GB. Upon installing the three brand new sticks, the system blue screened again, this time stating that win32k.sys attempted to write to read-only memory. I inserted my custom Windows PE disk in order to get a better look at the memory dump with BlueScreenView, but it refused to boot and produced another blue screen, but without an error message. I removed each new stick one-by-one, restarting each time. It continued to blue screen until I was left with only the original stick. I then tried inserting the new sticks in various different orders, but this only produced more blue screens. I reinserted all three sticks (along with the original) and ran memtest86 again, which reported errors all over the place. So, now I'm right back where I started. I don't think it could be the slots themselves, because I can plug the original stick into any slot and it works just fine. System setup reports each stick correctly and shows the total as 1GB, however. It just seems strange to me that all three brand new sticks of RAM could be dead on arrival. Is there something I missed? Or should I just go ahead and RMA them?

  Read the article

• No sound Ubuntu 10.10 (have SB Live! card)

  - by Chris Frazier

  I am new to Linux/Ubuntu and I just installed 10.10 on my Dell Desktop PC that was running Windows XP. The PC is about 5-6 years old and the sound card it has is a SoundBlaster Live! card. The Sound Preferences recognizes the card as [SB Live! Value] EMU10k1X. It is currently set to Analog Stereo Duplex. I tried multiple other sound configurations and nothing works. No sound but some clicks come out of the speakers. I ran the system test and during the audio tests the same thing happened, just clicks and pops. I tried to play some music with Rhythmbox and when it tries to play a track it tries for several seconds and then just closes itself, or sometimes just doesn't play. I ran a check for drivers, but the only driver it found to install was for my nVidia video card. It did not show any drivers for the sound card. Does anyone have any idea what I need to do to get the sound to work?

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Finding the current user authenticated by basic auth (Apache)

  - by jtd

  When you log in through a basic auth page, is the username you authenticated as stored anywhere (on the server or client machine), maybe in an environment variable? Background: I have a common web administration page for an e-mail server and I'd like to know who is doing what. When a user successfully logs in via basic auth, I somehow want to be able to identify them and log their actions. So each time a request is submitted, I can write to a log file. The basic format would be: $username ran a $function against $useraccount so if a user changed someone's permissions, eg: Admin-Bob ran a permission change against User-Scott So if errors occur, I can easily trace back in the log file what actions lead to the cause. I tried checking the %ENV hash to no avail, any Ideas? I don't really want to get into PHP-like sessions, because that would mean scrapping my basic auth, which gives me a fine degree of control already. If I have to code something with sessions, I'd need to implement a system to block users after maximum tries and so on, which I don't really want to code. I think this is better geared towards serverfault because it pertains to Apache moreso than the programming language. Sessions can be done in a myriad of languages.

  Read the article

• CPANEL ModSec2 not working with SecFilterSelective

  - by jfreak53

  Ok, I have cPanel/WHM latest on a Dedi, here are my specs on apache: Server version: Apache/2.2.23 (Unix) Server built: Oct 13 2012 19:33:23 Cpanel::Easy::Apache v3.14.13 rev9999 I just ran a re-compile using easyapache as you can see by the date. When running it I made sure that ModSec was selected and it stated in big bold letters something to the effect of If you install Apache 2.2.x you get ModSec 2 So I believed it :) I recompiled, I then ran: grep -i release /home/cpeasyapache/src/modsecurity-apache_2.6.8/apache2/mod_security2.c Hmm, the file is there but grep doesn't output anything, if I run: grep -i release /home/cpeasyapache/src/modsecurity-apache_1.9.5/apache2/mod_security.c I of course get the ModSec 1 version output. But the thing is that ModSec2 is installed since the c file is there. So I continued and put the following in modsec2.user.conf: SecFilterScanOutput On SecFilterSelective OUTPUT "text" Now when I restart Apache I get this error: Syntax error on line 1087 of /usr/local/apache/conf/modsec2.user.conf: Invalid command 'SecFilterScanOutput', perhaps misspelled or defined by a module not included in the server configuration Now supposedly this is supposed to work, I even have it running in ModSec2 on a non-cpanel server setup manually. So I know ModSec2 supports it. Anyone have any ideas? I have asked this question over at cpanel forum and it got nowhere.

  Read the article

• Losing SQL connections

  - by john pavelka

  sql servr 2005 - Standard; one dedicated sql server (VM); windows server 2003; Small databases; About once a week we lose all sql connections. It seems to fix itself after about 5-10 minutes. System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. We don't have a fully qualified DBA; it's kind of a joint effort here. Can somebody give me some general ideas for troubleshooting the network side and the application side? We already ran a few tuning profiles and ran through Database Tuning Advisor to apply indexing recommendations. It would sure be nice if there was a way to take a snapshot of what was running on sql server when these 100% cpu spikes occured, but sometimes we're not around. Is it common to throttle CPU for certain processes? Can this be done with Windows server 2003? For example, if security apps were making cpu spike to 100%, is there a way to limit their cpu usage? Any advice is appreciated. thanks,

  Read the article

• Seeing traffic destined for other people's servers in wireshark

  - by user350325

  I rent a dedicated server from a hosting provider. I ran wireshark on my server so that I could see incoming HTTP traffic that was destined to my server. Once I ran wireshark and filtered for HTTP I noticed a load of traffic, but most of it was not for stuff that was hosted on my server and had a destination IP address that was not mine, there were various source IP addresses. My immediate reaction was to think that somebody was tunnelling their HTTP traffic through my server somehow. However when I looked closer I noticed that all of this traffic was going to hosts on the same subnet and all of these IP addresses belonged to the same hosting provider that I was using. So it appears that wireshark was intercepting traffic destined for other customers who's servers are attached to the same part of the network as mine. Now I always assumed that on a switch based network that this should not happen as the switch will only send data to the required host and not to every box attached. I assume in this case that other customers would also be able to see data going to my server. As well as potential privacy concerns, this would surely make ARP poising easy and allow others to steal IP addresses (and therefor domains and websites)? It would seem odd that a network provider would configure the network in such a way. Is there a more rational explanation here?

  Read the article

• Computer not finding hard drives on boot -sometimes-

  - by todd.pund

  Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

  Read the article

• "Error 5: Access denied" when installing programs with UAC turned off

  - by Aero

  I'm having some trouble installing msysgit 1.7.3.1preview on Windows 7 Home Premium. I downloaded the setup file from the Google Code and then ran it. Upon running, I got the following error: I have tried downloading and running different older versions of msysgit with no luck. For the record, I have administrative privileges and there are no other user accounts on this Windows machine. Any help would be greatly appreciated. Thanks. UPDATE: I have managed to semi-fix this problem. I turned on User Account Control back to the default setting and and then ran the setup file as an administrator. I successfully managed to install Git. However, this means I have to keep UAC turned on whenever I want to install a new program (I realised that it persists over all programs; not just Git). So it's quite a nuisance. If anybody knows how I could keep UAC disabled whilst still being able to install programs without running their setup files as an administrator, I would be eternally grateful. UPDATE: I have changed the question title to better suit the new situation.

  Read the article

• Repairing Windows 7 boot after Ubuntu 10.10 install

  - by Ted

  I've read various threads on this after googling, including one on this site. I had Windows 7 installed on an SSD. I wanted to try Ubuntu so I created a partition for it on the SSD and booted with the live CD to install Ubuntu. Went through the install and somehow Ubuntu carved out another partition on the SSD rather than using the one I had already created. Windows 7 would then not boot but Ubuntu would. I booted with my 7 cd and ran the automatic startup repair, it didn't find any problems. I then ran the bootsect command on the drive with 7. It said it repaired the bootmgr but Windows still would not boot and now Ubuntu won't either. I read somewhere else that it may be due to the partition that 7 was on being changed during the install. I don't care about the Ubuntu installation but I don't want to lose the 7 install, can I delete the ubuntu partition through booting with the 7 cd? Will that do any good? Thank you all! I'm stumped even though I've done startup repairs before, just not after Ubuntu install.

  Read the article

• Is it possible to to create a live linux iso containing a win xp virtual machine?

  - by mark

  I would like to have a Linux live system that contains a Windows xp virtual machine. This would be run from a bootable USB flash drive. My attempts so far have been unsuccessful. I created a Lubuntu 12.04 virtual machine with VMware. I updated and configured it to my needs, and installed Virtualbox. I then created a Windows xp vm with Virtualbox in the Lubuntu vm. I tested everything and everything worked, including USB devices. I installed Remastersys in the Lubuntu vm, copied the xp vm folder to the /etc/skel folder then created the custom iso with remastersys. I burned the iso and tested it on a laptop. It worked flawlessly. All programs and wireless networking worked. My problem was the xp vm. Virtualbox started fine but would not run the vm. I have the following error: Result Code: NS_ERROR_FAILURE (0x80004005) Component: VirtualBox Interface: IVirtualBox {c28be65f-1a8f-43b4-81f1-eb60cb516e66}. I ran remastersys again changing the permissions on the skel folder to R W for everyone. I also logged into Lubuntu as root and ran remastersys again. Each iso I created worked fine but would not start the xp vm inside. The last attempt virtualbox gave me an access error stating it can not access the virtual disk. Is what I want to do possible? In theory I don't see why it would not work. Is it a permissions issue? Should I create the iso then add the xp vm after by editing the iso by hand? Using a vm and not real hardware as a build machine a problem? Any ideas? keep any responses in laymens terms. I am still a Linux novice.

  Read the article

• Windows 7 not booting up and stuck at startup repair

  - by mikimr

  I've been having issues with Windows 7 Home Premium on a Lenovo laptop. At first, it would not start up normally at all. I started it in Safe Mode, where I disabled all non-MS services and tried again to no avail. It then goes into Startup repair where it failed several times. I tried copying the original registry settings, still the same. I resorted to booting with an Ubuntu DVD, where I ran the boot-repair, where it is supposed to correct the Windows boot. No luck. I used Win7 DVD to start up from there, where I had the option to install or repair. I chose the repair, got into command prompt, ran chkdsk /i /r, where it found 3 unreadable segments, went through the 2nd step without issues, and the 3rd step completed with some errors (can't recall the exact errors). When I restarted the machine, it went to straight to the Stratup Repair, indicating "Attempting repairs... Repairing dis errors. This might take over an hour to complete." It's been like this for nearly 15 hours. When I try to cancel or close the Startup Repair window, I get a message "The current repair operation cannot be cancelled." Should I let it run or force shut the machine? If force shut, how can I resolve this problem? Thanks.

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Log Problem and bash script

  - by GvWorker

  Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

  Read the article

• Apache /server-status/ gives a 404 not found

  - by user57069

  I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking. first, system info: monitored server CentOS 5.3 kernel 2.6.18-128.1.1.el5 Apache/2.2.3 "server-status" directive in httpd.conf (i've cross-compared this with another system that i did a successful parallel install of Munin on, correctly showing Apache stats, and the directive below is the same for both) ExtendedStatus On <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> ran lynx http://localhost/server-status got HTTP/1.1 404 taking a look at Apache access_log: 127.0.0.1 - - [13/Oct/2010:07:00:47 -0700] "GET /server-status HTTP/1.0" 404 11237 "-" "Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 OpenSSL/0.9.8e-fips-rhel5" mod_status is also loaded: % grep "mod_status" /etc/httpd/conf/httpd.conf LoadModule status_module modules/mod_status.so iptables is turned off also i did notice that the ownership status on httpd.conf on this system is root.root.. whereas the system that is displaying correctly is apache.www -- not certain that this matters?? its got to be permission issue, but i'm not certain where the permissions are messed up. any thoughts on why the test of server-status is giving me a 404?

  Read the article

• What's the safest way to kick off a root-level process via cgi on an Apache server?

  - by MartyMacGyver

  The problem: I have a script that runs periodically via a cron job as root, but I want to give people a way to kick it off asynchronously too, via a webpage. (The script will be written to ensure it doesn't run overlapping instances or such.) I don't need the users to log in or have an account, they simply click a button and if the script is ready to be run it'll run. The users may select arguments for the script (heavily filtered as inputs) but for simplicity we'll say they just have the button to choose to press. As a simple test, I've created a Python script in cgi-bin. chown-ing it to root:root and then applying "chmod ug+" to it didn't have the desired results: it still thinks it has the effective group of the web server account... from what I can tell this isn't allowed. I read that wrapping it with a compiled cgi program would do the job, so I created a C wrapper that calls my script (its permissions restored to normal) and gave the executable the root permissions and setuid bit. That worked... the script ran as if root ran it. My main question is, is this normal (the need for the binary wrapper to get the job done) and is this the secure way to do this? It's not world-facing but still, I'd like to learn best practices. More broadly, I often wonder why a compiled binary is more "trusted" than a script in practice? I'd think you'd trust a file that was human-readable over a cryptic binaryy. If an attacker can edit a file then you're already in trouble, more so if it's one you can't easily examine. In short, I'd expect it to be the other way 'round on that basis. Your thoughts?

  Read the article

• Scanning to network share

  - by tking

  In our environment we have several printers with the scan to folder functionality set up. It worked pretty well. Long story short- I needed to reboot our file server one evening (the server whose $hares where all the scans go), upon on boot up I received a message stating the name of the file server (i.e AcmeFS1; Windows Server 2003) could not be used because there was a duplicate name on the network. I found that somehow another printer on the network was using the name of the file server. Weird - I know. People could no longer scan to their folders. I ran an nbtstat on the file server and found that the local netbios name table was empty. I renamed the offending printer and rebooted the file server once more. This time, no error, and once I ran nbtstat again, I found that correct name and domain in the local netbios name table. Problem is, scan to folder is still not working. I know this was working before I rebooted the file server the first time. Anyone have any idea what is going on and how to fix? Thanks. FIXED: Not sure why the reboot didnt fix it but I restarted the "Server" service on the file server and the problem went away.

  Read the article

• How to fix UNMOUNTABLE_BOOT_VOLUME (0x000000ED) on my Windows XP DELL laptop?

  - by Neil

  I have a Dell Latitude D410. Running Windows XP. I am receiving the STOP: 0x000000ED (0X899CF030,0XC0000185,0X00000000,0X00000000) Blue screen. Initially, I tried everything specified with the Microsoft KB articles. At this time, I was able to boot into the general safemode. I pulled the hard drive and was able to run chkdsk on it- it noted that it had fixed some errors, but I was still unable to boot. I put a brand new hard drive in the laptop. Windows XP installation worked up until the reboot, at which time the exact same error message came back up. What I have tried (all since the new hard drive was installed): chkdsk /R All suggested solutions in Microsoft KB articles Reseating RAM Opened laptop, reseated all connectors, looked for signs of damage (saw none) Reset BIOS options to default Ran the basic Dell diagnostics I have looked at the current entry:How can I boot XP after receiving stop error 0x000000ED - I am currently in the process of downloading the Ultimate Boot CD to use as a test, but I am not holding out a lot of hope as I really doubt this brand new Hard Drive is bad. Can anyone think of other areas I am missing? Ran MEMTEST86+ V4.10 for 15 passes (overnight). 0 Errors EDIT: FORMATTING

  Read the article

• Computer is dying--what should I be looking for?

  - by Will

  Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

  Read the article

• Recovering a broken NTFS filesystem?

  - by OverTheRainbow

  A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

  Read the article

• Cannot Install Windows 7 SP1 (64-bit)

  - by Clever Human

  I have tried every way I know how to get Windows 7 SP1 to install. It fails every time. Below is what looks like the relevant contents of the CBS.Log file. If there are further details that would help or more information I can gather, I will get it. 2011-08-15 10:32:52, Info CBS Startup: Package: Package_for_KB976902~31bf3856ad364e35~amd64~~6.1.1.17514 completed startup processing, new state: Installed, original: Installed, targeted: Installed. hr = 0x80070490 2011-08-15 10:32:52, Info CBS WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status: 0x80070490, failure source: CBS Other, start state: Partially Installed, target state: Installed, client id: SP Coordinater Engine 2011-08-15 10:32:52, Info CBS Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND] 2011-08-15 10:32:52, Info CBS Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it... 2011-08-15 10:32:52, Info CBS Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without it... 2011-08-15 10:32:52, Info CBS SQM: Reporting package change completion for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current: Partially Installed, original: Partially Installed, target: Installed, status: 0x80070490, failure source: CBS Other, failure details: "(null)", client id: SP Coordinater Engine, initiated offline: False, execution sequence: 517, first merged sequence: 517 2011-08-15 10:32:52, Info CBS SQM: Upload requested for report: PackageChangeEnd_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, session id: 101457924, sample type: Standard 2011-08-15 10:32:52, Info CBS SQM: Ignoring upload request because the sample type is not enabled: Standard I have downloaded the service pack and ran it from the EXE, I have installed it from Windows Update, I have ran all the "troubleshooting" trouble shots I could find. Nothing has worked so far. Any advice would be appreciated.

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >