Search Results

Search found 595 results on 24 pages for 'validating'.

Page 21/24 | < Previous Page | 17 18 19 20 21 22 23 24  | Next Page >

• How to get rid of messages addressed to not existing subdomains?

  - by user71061

  Hi! I have small problem with my sendmail server and need your little help :-) My situation is as follow: User mailboxes are placed on MS exchanege server and all mail to and from outside world are relayed trough my sendmail box. Exchange server ----- sendmail server ------ Internet My servers accept messages for one main domain (say, my.domain.com) and for few other domains (let we narrow it too just one, say my_other.domain.com). After configuring sendmail with showed bellow abbreviated sendmail.mc file, essentially everything works ok, but there is small problem. I want to reject messages addressed to not existing recipients as soon as possible (to avoid sending non delivery reports), so my sendmail server make LDAP queries to exchange server, validating every recipient address. This works well both domains but not for subdomains. Such subdomains do not exist, but someone (I'm mean those heated spamers :-) could try addresses like this: user@any_host.my.domain.com or user@any_host.my_other.domain.com and for those addresses results are as follows: Messages to user@sendmail_hostname.my.domain.com are rejected with error "Unknown user" (due to additional LDAPROUTE_DOMAIN line in my sendmail.mc file, and this is expected behaviour) Messages to user@any_other_hostname.my.domain.com are rejected with error "Relaying denied". Little strange to me, why this time the error is different, but still ok. After all message was rejected and I don't care very much what error code will be returned to sender (spamer). Messages to user@sendmail_hostname.my_other.domain.com and user@any_other_hostname.my_other.domain.com are rejected with error "Unknown user" but only when, there is no user@my_other.domain.com mailbox (on exchange server). If such mailbox exist, then all three addresses (i.e. user@my_other.domain.com, user@sendmail_hostname.my_other.domain.com and user@any_other_hostname.my_other.domain.com) will be accepted. (adding additional line LDAPROUTE_DOMAIN(my_sendmail_host.my_other.domain.com) to my sendmail.mc file don't change anything) My abbreviated sendmail.mc file is as follows (sendmail 8.14.3-5). Both domains are listed in /etc/mail/local-host-names file (FEATURE(use_cw_file) ): define(`_USE_ETC_MAIL_')dnl include(`/usr/share/sendmail/cf/m4/cf.m4')dnl OSTYPE(`debian')dnl DOMAIN(`debian-mta')dnl undefine(`confHOST_STATUS_DIRECTORY')dnl define(`confRUN_AS_USER',`smmta:smmsp')dnl FEATURE(`no_default_msa')dnl define(`confPRIVACY_FLAGS',`needmailhelo,needexpnhelo,needvrfyhelo,restrictqrun,restrictexpand,nobodyreturn,authwarnings')dnl FEATURE(`use_cw_file')dnl FEATURE(`access_db', , `skip')dnl FEATURE(`always_add_domain')dnl MASQUERADE_AS(`my.domain.com')dnl FEATURE(`allmasquerade')dnl FEATURE(`masquerade_envelope')dnl dnl define(`confLDAP_DEFAULT_SPEC',`-p 389 -h my_exchange_server.my.domain.com -b dc=my,dc=domain,dc=com')dnl dnl define(`ALIAS_FILE',`/etc/aliases,ldap:-k (&(|(objectclass=user)(objectclass=group))(proxyAddresses=smtp:%0)) -v mail')dnl FEATURE(`ldap_routing',, `ldap -1 -T<TMPF> -v mail -k proxyAddresses=SMTP:%0', `bounce')dnl LDAPROUTE_DOMAIN(`my.domain.com')dnl LDAPROUTE_DOMAIN(`my_other.domain.com ')dnl LDAPROUTE_DOMAIN(`my_sendmail_host.my.domain.com')dnl define(`confLDAP_DEFAULT_SPEC', `-p 389 -h "my_exchange_server.my.domain.com" -d "CN=sendmail,CN=Users,DC=my,DC=domain,DC=com" -M simple -P /etc/mail/ldap-secret -b "DC=my,DC=domain,DC=com"')dnl FEATURE(`nouucp',`reject')dnl undefine(`UUCP_RELAY')dnl undefine(`BITNET_RELAY')dnl define(`confTRY_NULL_MX_LIST',true)dnl define(`confDONT_PROBE_INTERFACES',true)dnl define(`MAIL_HUB',` my_exchange_server.my.domain.com.')dnl FEATURE(`stickyhost')dnl MAILER_DEFINITIONS MAILER(smtp)dnl Could someone more experienced with sendmail advice my how to reject messages to those unwanted subdomains? P.S. Mailboxes @my_other.domain.com are used only for receiving messages and never for sending.

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David Boike

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• The Interaction between Three-Tier Client/Server Model and Three-Tier Application Architecture Model

  The three-tier client/server model is a network architectural approach currently used in modern networking. This approach divides a network in to three distinct components. Three-Tier Client/Server Model Components Client Component Server Component Database Component The Client Component of the network typically represents any device on the network. A basic example of this would be computer or another network/web enabled devices that are connected to a network. Network clients request resources on the network, and are usually equipped with a user interface for the presentation of the data returned from the Server Component. This process is done through the use of various software clients, and example of this can be seen through the use of a web browser client. The web browser request information from the Server Component located on the network and then renders the results for the user to process. The Server Components of the network return data based on specific client request back to the requesting client.  Server Components also inherit the attributes of a Client Component in that they are a device on the network and that they can also request information from other Server Components. However what differentiates a Client Component from a Server Component is that a Server Component response to requests from devices on the network. An example of a Server Component can be seen in a web server. A web server listens for new requests and then interprets the request, processes the web pages, and then returns the processed data back to the web browser client so that it may render the data for the user to interpret. The Database Component of the network returns unprocessed data from databases or other resources. This component also inherits attributes from the Server Component in that it is a device on a network, it can request information from other server components and database components, and it also listens for new requests so that it can return data when needed. The three-tier client/server model is very similar to the three-tier application architecture model, and in fact the layers can be mapped to one another. Three-Tier Application Architecture Model Presentation Layer/Logic Business Layer/Logic Data Layer/Logic The Presentation Layer including its underlying logic is very similar to the Client Component of the three-tiered model. The Presentation Layer focuses on interpreting the data returned by the Business Layer as well as presents the data back to the user.  Both the Presentation Layer and the Client Component focus primarily on the user and their experience. This allows for segments of the Business Layer to be distributable and interchangeable because the Presentation Layer is not directly integrated in with Business Layer. The Presentation Layer does not care where the data comes from as long as it is in the proper format. This allows for the Presentation Layer and Business Layer to be stored on one or more different servers so that it can provide a higher availability to clients requesting data. A good example of this is a web site that uses load balancing. When a web site decides to take on the task of load balancing they must obtain a network device that sits in front of a one or machines in order to distribute the request across multiple servers. When a user comes in through the load balanced device they are redirected to a specific server based on a few factors. Common Load Balancing Factors Current Server Availability Current Server Response Time Current Server Priority The Business Layer and corresponding logic are business rules applied to data prior to it being sent to the Presentation Layer. These rules are used to manipulate the data coming from the Data Access Layer, in addition to validating any data prior to being stored in the Data Access Layer. A good example of this would be when a user is trying to create multiple accounts under one email address. The Business Layer logic can prevent duplicate accounts by enforcing a unique email for every new account before the data is even stored in the Data Access Layer. The Server Component can be directly tied to this layer in that the server typically stores and process the Business Layer before it is returned to the end-user via the Presentation Layer. In addition the Server Component can also run automated process through the Business Layer on the data in the Data Access Layer so that additional business analysis can be derived from the data that has been already collected. The Data Layer and its logic are responsible for storing information so that it can be easily retrieved. Typical in most modern applications data is stored in a database management system however data can also be in the form of files stored on a file server. In addition a database can take on one of several forms. Common Database Formats XML File Pipe Delimited File Tab Delimited File Comma Delimited File (CSV) Plain Text File Microsoft Access Microsoft SQL Server MySql Oracle Sybase The Database component of the Networking model can be directly tied to the Data Layer because this is where the Data Layer obtains the data to return back the Business Layer. The Database Component basically allows for a place on the network to store data for future use. This enables applications to save data when they can and then quickly recall the saved data as needed so that the application does not have to worry about storing the data in memory. This prevents overhead that could be created when an application must retain all data in memory. As you can see the Three-Tier Client/Server Networking Model and the Three-Tiered Application Architecture Model rely very heavily on one another to function especially if different aspects of an application are distributed across an entire network. The use of various servers and database servers are wonderful when an application has a need to distribute work across the network. Network Components and Application Layers Interaction Database components will store all data needed for the Data Access Layer to manipulate and return to the Business Layer Server Component executes the Business Layer that manipulates data so that it can be returned to the Presentation Layer Client Component hosts the Presentation Layer that  interprets the data and present it to the user

  Read the article

• Silverlight 5 &ndash; What&rsquo;s New? (Including Screenshots &amp; Code Snippets)

  - by mbcrump

  Silverlight 5 is coming next year (2011) and this blog post will tell you what you need to know before the beta ships. First, let me address people saying that it is dead after PDC 2010. I believe that it’s best to see what the market is doing, not the vendor. Below is a list of companies that are developing Silverlight 4 applications shown during the Silverlight Firestarter. Some of the companies have shipped and some haven’t. It’s just great to see the actual company names that are working on Silverlight instead of “people are developing for Silverlight”. The next thing that I wanted to point out was that HTML5, WPF and Silverlight can co-exist. In case you missed Scott Gutherie’s keynote, they actually had a slide with all three stacked together. This shows Microsoft will be heavily investing in each technology.  Even I, a Silverlight developer, am reading Pro HTML5. Microsoft said that according to the Silverlight Feature Voting site, 21k votes were entered. Microsoft has implemented about 70% of these votes in Silverlight 5. That is an amazing number, and I am crossing my fingers that Microsoft bundles Silverlight with Windows 8. Let’s get started… what’s new in Silverlight 5? I am going to show you some great application and actual code shown during the Firestarter event. Media Hardware Video Decode – Instead of using CPU to decode, we will offload it to GPU. This will allow netbooks, etc to play videos. Trickplay – Variable Speed Playback – Pitch Correction (If you speed up someone talking they won’t sound like a chipmunk). Power Management – Less battery when playing video. Screensavers will no longer kick in if watching a video. If you pause a video then screensaver will kick in. Remote Control Support – This will allow users to control playback functions like Pause, Rewind and Fastforward. IIS Media Services 4 has shipped and now supports Azure. Data Binding Layout Transitions – Just with a few lines of XAML you can create a really rich experience that is not using Storyboards or animations. RelativeSource FindAncestor – Ancestor RelativeSource bindings make it much easier for a DataTemplate to bind to a property on a container control. Custom Markup Extensions – Markup extensions allow code to be run at XAML parse time for both properties and event handlers. This is great for MVVM support. Changing Styles during Runtime By Binding in Style Setters – Changing Styles at runtime used to be a real pain in Silverlight 4, now it’s much easier. Binding in style setters allows bindings to reference other properties. XAML Debugging – Below you can see that we set a breakpoint in XAML. This shows us exactly what is going on with our binding.  WCF & RIA Services WS-Trust Support – Taken from Wikipedia: WS-Trust is a WS-* specification and OASIS standard that provides extensions to WS-Security, specifically dealing with the issuing, renewing, and validating of security tokens, as well as with ways to establish, assess the presence of, and broker trust relationships between participants in a secure message exchange. You can reduce network latency by using a background thread for networking. Supports Azure now.  Text and Printing Improved text clarity that enables better text rendering. Multi-column text flow, Character tracking and leading support, and full OpenType font support.  Includes a new Postscript Vector Printing API that provides control over what you print . Pivot functionality baked into Silverlight 5 SDK. Graphics Immediate mode graphics support that will enable you to use the GPU and 3D graphics supports. Take a look at what was shown in the demos below. 1) 3D view of the Earth – not really a real-world application though. A doctor’s portal. This demo really stood out for me as it shows what we can do with the 3D / GPU support. Out of Browser OOB applications can now create and manage childwindows as shown in the screenshot below.  Trusted OOB applications can use P/Invoke to call Win32 APIs and unmanaged libraries.  Enterprise Group Policy Support allow enterprises to lock down or up the sandbox capabilities of Silverlight 5 applications. In this demo, he tore the “notes” off of the application and it appeared in a new window. See the black arrow below. In this demo, he connected a USB Device which fired off a local Win32 application that provided the data off the USB stick to Silverlight. Another demo of a Silverlight 5 application exporting data right into Excel running inside of browser. Testing They demoed Coded UI, which is available now in the Visual Studio Feature Pack 2. This will allow you to create automated testing without writing any code manually. Performance: Microsoft has worked to improve the Silverlight startup time. Silverlight 5 provides 64-bit browser support.  Silverlight 5 also provides IE9 Hardware acceleration.   I am looking forward to Silverlight 5 and I hope you are too. Thanks for reading and I hope you visit again soon.  Subscribe to my feed CodeProject

  Read the article

• Get your content off Blogger.com

  - by Daniel Moth

  Due to blogger.com deprecating FTP users I've decided to move my blog. When I think of the content of a blog, 4 items come to mind: blog posts, comments, binary files that the blog posts linked to (e.g. images, ZIP files) and the CSS+structure of the blog. 1. Binaries The binary files you used in your blog posts are sitting on your own web space, so really blogger.com is not involved with that. Nothing for you to do at this stage, I'll come back to these in another post. 2. CSS and structure In the best case this exists as a separate CSS file on your web space (so no action for now) or in a worst case, like me, your CSS is embedded with the HTML. In the latter case, simply navigate from you dashboard to "Template" then "Edit HTML" and copy paste the contents of the box. Save that locally in a txt file and we'll come back to that in another post. 3. Blog posts and Comments The blog posts and comments exist in all the HTML files on your own web space. Parsing HTML files to extract that can be painful, so it is easier to download the XML files from blogger's servers that contain all your blog posts and comments. 3.1 Single XML file, but incomplete The obvious thing to do is go into your dashboard "Settings" and under the "Basic" tab look at the top next to "Blog Tools". There is a link there to "Export blog" which downloads an XML file with both comments and posts. The problem with that is that it only contains 200 comments - if you have more than that, you will lose the surplus. Also, this XML file has a lot of noise, compared to the better solution described next. (note that a tool I will refer to in a future post deals with either kind of XML file) 3.2 Multiple XML files First you need to find your blog ID. In case you don't know what that is, navigate to the "Template" as described in section 2 above. You will find references to the blog id in the HTML there, but you can also see it as part of the URL in your browser: blogger.com/template-edit.g?blogID=YOUR_NUMERIC_ID. Mine is 7 digits. You can now navigate to these URLs to download the XML for your posts and comments respectively: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=1 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=1 Note that you can only get 500 posts at a time and only 200 comments at a time. To get more than that you have to change the URL and download the next batch. To get you started, to get the XML for the next 500 posts and next 200 comments respectively you’d have to use these URLs: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=501 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=201 ...and so on and so forth. Keep all the XML files in the same folder on your local machine (with nothing else in there). 4. Validating the XML aka editing older blog posts The XML files you just downloaded really contain HTML fragments inside for all your blog posts. If you are like me, your blog posts did not conform to XHTML so passing them to an XML parser (which is what we will want to do) will result in the XML parser choking. So the next step is to fix that. This can be no work at all for you, or a huge time sink or just a couple hours of pain (which was my case). The process I followed was to attempt to load the XML files using XmlDocument.Load and wait for the exception to be thrown from my code. The exception would point to the exact offending line and column which would help me fix the issue. Rather than fix it in the XML itself, I would go back and edit the offending blog post and fix it there - recommended! Then I'd repeat the cycle until the XML could be loaded in the XmlDocument. To give you an idea, some of the issues I encountered are: extra or missing quotes in img and href elements, direct usage of chevrons instead of encoding them as &lt;, missing closing tags, mismatched nested pairs of elements and capitalization of html elements. For a full list of things that may go wrong see this. 5. Opportunity for other changes I also found a few posts that did not have a category assigned so I fixed those too. I took the further opportunity to create new categories and tag some of my blog posts with that. Note that I did not remove/change categories of existing posts, but only added.   In an another post we'll see how to use the XML files you stored in the local folder… Comments about this post welcome at the original blog.

  Read the article

• Dlink DWA-556 Access point fails to start on 2.6.35-25 while 2.6.35-24 works. How can I do this with >2.6.35-24?

  - by Azendale

  I'm using hostapd to run an access point with a Dlink DWA-556 wireless N card. However, I can no longer get it to start when I use kernels greater than 2.6.35-24. Here's a log where I ran the uname -a&&hostapd -c <configfile> on the different kernel versions. Linux erikbandersen 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr 1c:bd:b9:d5:e8:3c and ssid 'erikbandersen.com/freewifi' wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=436 left=256 plen=420 256 extra bytes in the end of netlink message MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb mgmt::auth authentication: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authentication OK (open system) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-AUTHENTICATE.indication(3c:4a:92:0e:41:2f, OPEN_SYSTEM) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) authentication reply: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authenticated mgmt::assoc_req association request: STA=3c:4a:92:0e:41:2f capab_info=0x421 listen_interval=10 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 HT: STA 3c:4a:92:0e:41:2f HT Capabilities Info: 0x102c handle_assoc STA 3c:4a:92:0e:41:2f - no greenfield, num of non-gf stations 1 handle_assoc STA 3c:4a:92:0e:41:2f - 20 MHz HT, num of 20MHz HT STAs 1 hostapd_ht_operation_update current operation mode=0x0 hostapd_ht_operation_update new operation mode=0x7 changes=2 new AID 1 wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: associated (aid 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-ASSOCIATE.indication(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f RADIUS: starting accounting session 4DAC8224-00000000 MGMT (TX callback) ACK mgmt::action cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb Signal 2 received - terminating wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DEAUTHENTICATE.indication(3c:4a:92:0e:41:2f, 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) Removing station 3c:4a:92:0e:41:2f hostapd_ht_operation_update current operation mode=0x7 hostapd_ht_operation_update new operation mode=0x0 changes=2 Flushing old station entries Deauthenticate all stations . Linux erikbandersen 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=27 dBm HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Could not set channel for kernel driver wlan1: Unable to setup interface. My wireless card is listed as 02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) by lspci. Am I doing it wrong and there's a new way of doing it? I'm holding off upgrading to Natty because of this. What changed between the versions that would cause this? Should I report it as a bug?

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #006

  - by pinaldave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 This was my very first year of blogging so I was every day learning something new. As I have said many times, that blogging was never an intention. I had really not understood what exactly I am working on or beginning when I was beginning blogging in 2006. I had never knew that my life was going to change forever, once I started blogging. When I look back all of this year, I am happy that we are here together. 2007 IT Outsourcing to India – Top 10 Reasons Companies Outsource Outsourcing is about trust, collaboration and success. Helping other countries in need has been always the course of mankind, outsourcing is nothing different then that. With information technology and process improvements increasing the complexity, costs and skills required to accomplish routine tasks as well as challenging complex tasks, companies are outsourcing such tasks to providers who have the expertise to perform them at lower costs , with greater value and quality outcome. UDF – Remove Duplicate Chars From String This was a very interesting function I wrote in my early career. I am still using this function when I have to remove duplicate chars from strings. I have yet to come across a scenario where it does not work so I keep on using it till today. Please leave a comment if there is any better solution to this problem. FIX : Error : 3702 Cannot drop database because it is currently in use This is a very generic error when DROP Database is command is executed and the database is not dropped. The common mistake user is kept the connection open with this database and trying to drop the database. The database cannot be dropped if there is any other connection open along with it. It is always a good idea to take database in single user mode before dropping it. Here is the quick tutorial regarding how to bring the database in single user mode: Using T-SQL | Using SSMS. 2008 Install SQL Server 2008 – How to Upgrade to SQL Server 2008 – Installation Tutorial This was indeed one of the most popular articles in SQL Server 2008. Lots of people wanted to learn how to install SQL SErver 2008 but they were facing various issues while installation. I build this tutorial which becomes reference points for many. Default Collation of SQL Server 2008 What is the collation of SQL Server 2008 default installations? I often see this question confusing many experienced developers as well. Well the answer is in following image. Ahmedabad SQL Server User Group Meeting – November 2008 User group meetings are fun, now a days I am going to User Group meetings every week but there was a case when I have been just a beginner on this subject. The bug of the community was caught on me years ago when I started to present in Ahmedabad and Gandhinagar SQ LServer User Groups. 2009 Validate an XML document in TSQL using XSD My friend Jacob Sebastian wrote an excellent article on the subject XML and XSD. Because of the ‘eXtensible’ nature of XML (eXtensible Markup Language), often there is a requirement to restrict and validate the content of an XML document to a pre-defined structure and values. XSD (XML Schema Definition Language) is the W3C recommended language for describing and validating XML documents. SQL Server implements XSD as XML Schema Collections. Star Join Query Optimization At present, when queries are sent to very large databases, millions of rows are returned. Also the users have to go through extended query response times when joining multiple tables are involved with such queries. ‘Star Join Query Optimization’ is a new feature of SQL Server 2008 Enterprise Edition. This mechanism uses bitmap filtering for improving the performance of some types of queries by the effective retrieval of rows from fact tables. 2010 These puzzles are very interesting and intriguing – there was lots of interest on this subject. If you have free time this weekend. You may want to try them out. SQL SERVER – Challenge – Puzzle – Usage of FAST Hint (Solution)  SQL SERVER – Puzzle – Challenge – Error While Converting Money to Decimal (Solution)  SQL SERVER – Challenge – Puzzle – Why does RIGHT JOIN Exists (Open)  Additionally, I had great fun presenting SQL Server Performance Tuning seminar at fantastic locations in Hyderabad. Installing AdventeWorks Database This has been the most popular request I have received on my blog. Here is the quick video about how one can install AdventureWorks. 2011 Effect of SET NOCOUNT on @@ROWCOUNT There was an interesting incident once while I was presenting a session. I wrote a code and suddenly 10 hands went up in the air.  This was a bit surprise to me as I do not know why they all got alerted. I assumed that there should be something wrong with either project, screen or my display. However the real reason was very interesting – I suggest you read the complete blog post to understand this interesting scenario. Error: Deleting Offline Database and Creating the Same Name This is very interesting because once a user deletes the offline database the MDF and LDF file still exists and if the user attempts to create a new database with the same name it will give error. I found this very interesting and the blog explains the concept very quickly. Have you ever faced a similar situation? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• WebLogic JDBC Use of Oracle Wallet for SSL

  - by Steve Felts

  Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

  Read the article

• Application Composer Series: Where and When to use Groovy

  - by Richard Bingham

  This brief post is really intended as more of a reference than an article. The table below highlights two things, firstly where you can add you own custom logic via groovy code (end column), and secondly (middle column) when you might use each particular feature. Obviously this applies only where Application Composer exists, namely Fusion CRM and Oracle Sales Cloud, and is based on current (release 8) functionality. Feature Most Common Use Case Groovy Field Triggers React to run-time data changes. Only fired when the field is changed and upon submit. Y Object Triggers To extend the standard processing logic for an object, based on record creation, updates and deletes. There is a split between these firing events, with some related to UI/ADF actions and others originating in the database. UI Trigger Points: After Create - fires when a new object record is created. Commonly used to set default values for fields. Before Modify - Fires when the end-user tries to modify a field value. Could be used for generic warnings or extra security logic. Before Invalidate - Fires on the parent object when one of its child object records is created, updated, or deleted. For building in relationship logic. Before Remove - Fires when an attempt is made to delete an object record. Can be used to create conditions that prevent deletes. Database Trigger Points: Before Insert in Database - Fires before a new object is inserted into the database. Can be used to ensure a dependent record exists or check for duplicates. After Insert in Database - Fires after a new object is inserted into the database. Could be used to create a complementary record. Before Update in Database -Fires before an existing object is modified in the database. Could be used to check dependent record values. After Update in Database - Fires after an existing object is modified in the database. Could be used to update a complementary record. Before Delete in Database - Fires before an existing object is deleted from the database. Could be used to check dependent record values. After Delete in Database - Fires after an existing object is deleted from the database. Could be used to remove dependent records. After Commit in Database - Fires after the change pending for the current object (insert, update, delete) is made permanent in the current transaction. Could be used when committed data that has passed all validation is required. After Changes Posted to Database - Fires after all changes have been posted to the database, but before they are permanently committed. Could be used to make additional changes that will be saved as part of the current transaction. Y Field Validation Displays a user entered error message based groovy logic validating the field value. The message is shown only when the validation logic returns false, and the logic is triggered only when tabbing out of the field on the user interface. Y Object Validation Commonly used where validation is needed across multiple related fields on the object. Triggered on the submit UI action. Y Object Workflows All Object Workflows are fired upon either record creation or update, along with the option of adding a custom groovy firing condition. Y Field Updates - change another field when a specified one changes. Intended as an easy way to set different run-time values (e.g. pick values for LOV's) plus the value field permits groovy logic entry. Y E-Mail Notification - sends an email notification to specified users/roles. Templates support using run-time value tokens and rich text. N Task Creation - for adding standard tasks for use in the worklist functionality. N Outbound Message - will create and send an XML payload of the related object SDO to a specified endpoint. N Business Process Flow - intended for approval using the seeded process, however can also trigger custom BPMN flows. N Global Functions Utility functions that can be called from any groovy code in Application Composer (across applications). Y Object Functions Utility functions that are local to the parent object. Usually triggered from within 'Buttons and Actions' definitions in Application Composer, although can be called from other code for that object (e.g. from a trigger). Y Add Custom Fields When adding custom fields there are a few places you can include groovy logic. Y Default Value - to add logic within setting the default value when new records are entered. Y Conditionally Updateable - to add logic to set the field to read-only or not. Y Conditionally Required - to add logic to set the field to required or not. Y Formula Field - Used to provide a new aggregate field that is entirely based on groovy logic and other field values. Y Simplified UI Layouts - Advanced Expressions Used for creating dynamic layouts for simplified UI pages where fields and regions show/hide based on run-time context values and logic. Also includes support for the depends-on feature as a trigger. Y Related References This Blog: Application Composer Series Extending Sales Guide: Using Groovy Scripts Groovy Scripting Reference Guide

  Read the article

• What are the industry metrics for average spend on dev hardware and software? [on hold]

  - by RationalGeek

  I'm trying to budget for my dev shop and compare our budget items to industry expectations. I'm hoping to find some information on what percentage of a dev's salary is generally spent on tooling, both hardware and software. Where can I find such information? If instead there is a source that looks at raw dollars that is useful, too. I can extrapolate what I need from that. NOTE: Your anecdotal evidence from your own job will not be very helpful. I'm looking for industry average statistics from a credible source. EDIT: I'm reluctant to even keep this question going based on the passionate negative responses of commenters, but I do think this is valuable information (assuming anyone will care to answer) so let me make one attempt to clarify why I'm looking for this information, and then leave it at that. I'm not sure why understanding and validating my motives is a necessary step to providing the information, but apparently that is the case, so I will do my best. Firstly, let me respond to the idea that us "management types" shouldn't use these types of metrics to evaluate budgets. I agree in part. Ideally, you should spend whatever is necessary on developers in order to keep them fully happy and productive. And this is true of all employees. However, companies operate in a world of limited resources, and every dollar spent in one area means a dollar not spent in another. So it is not enough to simply say "I need to spend $10,000 per developer next year" without having some way to justify that position. One way to help justify it is to compare yourself against the industry. If it is the case that on average a software shops spends 5% (making up that number) of their total development budget (salaries being the large portion of the other 95%, for arguments sake), and I'm only spending 3%, it helps in the justification process. So, it is not my intent to use this information to limit what I spend on developers, but rather to arm myself with the necessary justification to spend what I need to spend on developers to give them the best tools I can. I have been a developer for many years and I understand the need for proper tooling. Next, let's examine the idea that even considering the relationship between a spend on developer salaries and developer tooling is ludicrous and should be banned from budgetary thinking. As Jimmy Hoffa put it in their comment, it's like saying "I'm going to spend no more than 10% of median employee salary on light bulbs and coffee from now on.". Well, yes, it is like saying that, and from a budgeting perspective, this is a useful way to look at things. If you know that, on average, an employee consumes X dollars of coffee a year, then you can project a coffee budget based on that. And you can compare it to an industry metric to understand where you fall: do you spend more on coffee than other companies or less? Why might this be? If you are a coffee supply manager, that seems like a useful thought process. The same seems to hold true for developers. Now, on to the idea that I need to compare "apples to apples" and only look at other shops that are in the same place geographically, the same business, the same application architecture, and the same development frameworks. I guess if I could find such a statistic that said "a shop that is exactly identical to yours spends X on developer tooling" it would be wonderful. But there is plenty of value in an average statistic. Here's an analogy: let's say you are working on a household budget and need to decide how much to spend on groceries. Is it enough to know that the average consumer spends 15% on groceries and therefore decide that you will budget exactly 15%? No. You have to tweak your budget based on your individual needs and situation. But the generalized statistic does help in this evaluation. You can know if your budget is grossly off from what others are doing, and this can help you figure out why this is. So, I will concede the point that it would be better to find statistics that align to my shop, though I think any statistics I could find would be useful for what I'm doing. In that light, let's say that my shop is mostly focused on ASP.NET web applications. That doesn't map perfectly to reality because large enterprises have very heterogenous IT environments. But if I was going to pick one technology that is our focus that would be it. But, if you were to point me at some statistics that are related to a Linux shop doing embedded Java applications, I would still find it useful as a point of comparison. SUMMARY: Let me try to rephrase my question. I'm trying to find industry metrics on how much dev shops spend on developer tooling, both hardware and software. I don't so much care whether it is expressed as a percentage of total budget or as X dollars per dev or as Y percentage of salary. Any metric would be useful. If there are metrics that are specific to ASP.NET dev shops in the Northeast US, all the better, but I would be happy to find anything.

  Read the article

• jQuery Validation plugin: disable validation for specified submit buttons

  - by Ted

  I have a form with multiple fields that I'm validating (some with methods added for custom validation) with Jörn Zaeffere's excellent jQuery Validation plugin. How do you circumvent validation with specified submit controls (in other words, fire validation with some submit inputs, but do not fire validation with others)? This would be similar to ValidationGroups with standard ASP.NET validator controls. My situation: It's with ASP.NET WebForms, but you can ignore that if you wish. However, I am using the validation more as a "recommendation": in other words, when the form is submitted, validation fires but instead of a "required" message displaying, a "recommendation" shows that says something along the line of "you missed the following fields.... do you wish to proceed anyways?" At that point in the error container there's another submit button now visible that can be pressed which would ignore the validation and submit anyways. How to circumvent the forms .validate() for this button control and still post? The Buy and Sell a House sample at http://jquery.bassistance.de/validate/demo/multipart/ allows for this in order to hit the previous links, but it does so through creating custom methods and adding it to the validator. I would prefer to not have to create custom methods duplicating functionality already in the validation plugin. The following is a shortened version of the immediately applicable script that I've got right now: var container = $("#<%= Form.ClientID %> div.validationSuggestion"); $('#<%= Form.ClientID %>').validate({ errorContainer: container, errorLabelContainer: $("ul",container), rules: { <%= YesNo.UniqueID %>: { required: true }, <%= ShortText.UniqueID %>: { required: true } // etc. }, messages: { <%= YesNo.UniqueID %>: 'A message.', <%= ShortText.UniqueID %>: 'Another message.' // etc. }, highlight: function(element, errorClass) { $(element).addClass(errorClass); $(element.form).find("label[for=" + element.id + "]").addClass(errorClass); $(element.form).find("label[for=" + element.id + "]").removeClass("valid"); }, unhighlight: function(element, errorClass) { $(element).removeClass(errorClass); $(element.form).find("label[for=" + element.id + "]").removeClass(errorClass); $(element.form).find("label[for=" + element.id + "]").addClass("valid"); }, wrapper: 'li' }); Much thanks in advance for helpful pointers. [UPDATE] Thanks to redsquare I discovered it's as easy as adding class="cancel" to the submit button. So easy and yet I have no idea how I did not come across it in all my searching. And for those who say my my follow-up answer regarding "but requires a double-click": this was merely due to a leftover experiment line that was unbinding the event - again something I don't know how I overlooked when testing. Thanks!

  Read the article

• Integrating POP3 client functionality into a C# application?

  - by flesh

  I have a web application that requires a server based component to periodically access POP3 email boxes and retrieve emails. The service then needs to process the emails which will involve: Validating the email against some business rules (does it contain a valid reference in the subject line, which user sent the mail, etc.) Analysing and saving any attachments to disk Take the email body and attachment details and create a new item in the database Or update an existing item where the reference matches the incoming email subject line What is the best way to approach this? I really don't want to have to write a POP3 client from scratch, but I need to be able to customize the processing of emails. Ideally I would be able to plug in some component that does the access and retrieval for me, returning arrays of attachments, body text, subject line, etc. ready for my processing... [ UPDATE: Reviews ] OK, so I have spent a fair amount of time looking into (mainly free) .NET POP3 libraries so I thought I'd provide a short review of some of those mentioned below and a few others: Pop3.net - free - works OK, very basic in terms of functionality provided. This is pretty much just the POP3 commands and some base64 encoding, but it's very straight forward - probably a good introduction Pop3 Wizard - commercial / some open source code - couldn't get this to build, missing DLLs, I wouldn't bother with this C#Mail - free - works well, comes with Mime parser and SMTP client, however the comments are in Japanese (not a big deal) and it didn't work with SSL 'out of the box' - I had to change the SslStream constructor after which it worked no problem OpenPOP - free - hasn't been updated for about 5 years so it's current state is .NET 1.0, doesn't support SSL but that was no problem to resolve - I just replaced the existing stream with an SslStream and it worked. Comes with Mime parser. Of the free libraries, I'd go for C#Mail or OpenPOP. I looked at a few commercial libraries: Chillkat, Rebex, RemObjects, JMail.net. Based on features, price and impression of the company I would probably go for Rebex and may in the future if my requirements change or I run into production issues with either of C#Mail or OpenPOP. In case anyone's needs it, this is the replacement SslStream constructor that I used to enable SSL with C#Mail and OpenPOP: SslStream stream = new SslStream(clientSocket.GetStream(), false, delegate(object sender, X509Certificate cert, X509Chain chain, SslPolicyErrors errors) { return true; });

  Read the article

• Importing CSV filte to SQL server...

  - by sam

  HI guys, I am trying to import CSV file to SQL server database, no success, I am still newbie to sql server, thanks Operation stopped... Initializing Data Flow Task (Success) Initializing Connections (Success) Setting SQL Command (Success) Setting Source Connection (Success) Setting Destination Connection (Success) Validating (Success) Messages Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console. (SQL Server Import and Export Wizard) Prepare for Execute (Success) Pre-execute (Success) Messages Information 0x402090dc: Data Flow Task 1: The processing of file "D:\test.csv" has started. (SQL Server Import and Export Wizard) Executing (Error) Messages Error 0xc002f210: Drop table(s) SQL Task 1: Executing the query "drop table [dbo].[test] " failed with the following error: "Cannot drop the table 'dbo.test', because it does not exist or you do not have permission.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. (SQL Server Import and Export Wizard) Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data conversion for column ""Code"" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". (SQL Server Import and Export Wizard) Error 0xc020902a: Data Flow Task 1: The "output column ""Code"" (38)" failed because truncation occurred, and the truncation row disposition on "output column ""Code"" (38)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component. (SQL Server Import and Export Wizard) Error 0xc0202092: Data Flow Task 1: An error occurred while processing file "D:\test.csv" on data row 21. (SQL Server Import and Export Wizard) Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - test_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard) Copying to [dbo].[test] (Stopped) Post-execute (Success) Messages Information 0x402090dd: Data Flow Task 1: The processing of file "D:\test.csv" has ended. (SQL Server Import and Export Wizard) Information 0x402090df: Data Flow Task 1: The final commit for the data insertion in "component "Destination - test" (70)" has started. (SQL Server Import and Export Wizard) Information 0x402090e0: Data Flow Task 1: The final commit for the data insertion in "component "Destination - test" (70)" has ended. (SQL Server Import and Export Wizard) Information 0x4004300b: Data Flow Task 1: "component "Destination - test" (70)" wrote 0 rows. (SQL Server Import and Export Wizard)

  Read the article

• SSIS package randomly hangs during execution

  - by Adam MacLeod

  Hi Guys, I am having an ongoing and painful problem with an SSIS package. The package runs every 5 minutes as an SQL Agent Job and every 2-10 days the package will start running and never stop (thus preventing further executions). If I stop the hung job manually it will begin working perfectly again in the next 5 minute interval. The SSIS package is for moving data from an Oracle database to a MSSQL 2005 database. It has 7 steps: Step 1 calls an Oracle Stored Procedure to prepare the temporary tables inside ORACLE Steps 2-6 process the data from the ORACLE tables to the MSSQL tables ORACLE - MSSQL Step 7 calls an Oracle Stored Procedure to clear the ORACLE temporary tables I suspect that the issue is caused by a communications error between the MSSQL server and the ORACLE server. Both the MSSQL database and Agent/package run on one machine with the ORACLE database running over the network. I have enabled logging of the SQL package and after more than 2GB of log file I have captured the instant where the package stops responding: OnPreValidate,ADV-SRV5,NT AUTHORITY\SYSTEM,CallistaIntegrationToMonashCRM_delta,{F88F6C45-CFA2-4801-A2F2-DDF03D458A48},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,0,0x,(null) OnPreValidate,ADV-SRV5,NT AUTHORITY\SYSTEM,Address,{c5907799-f918-43da-818a-d4bd7f188367},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,0,0x,(null) OnInformation,ADV-SRV5,NT AUTHORITY\SYSTEM,Address,{c5907799-f918-43da-818a-d4bd7f188367},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,1074016266,0x,Validation phase is beginning. OnProgress,ADV-SRV5,NT AUTHORITY\SYSTEM,Address,{c5907799-f918-43da-818a-d4bd7f188367},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,0,0x,Validating Diagnostic,ADV-SRV5,NT AUTHORITY\SYSTEM,Callista,{cb5d6fe3-3ea4-4453-8e5a-965818021df7},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,0,0x,ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'. Diagnostic,ADV-SRV5,NT AUTHORITY\SYSTEM,Callista,{cb5d6fe3-3ea4-4453-8e5a-965818021df7},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,0,0x,ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed. Diagnostic,ADV-SRV5,NT AUTHORITY\SYSTEM,Callista,{cb5d6fe3-3ea4-4453-8e5a-965818021df7},{3A1FB1E3-B76D-444D-876B-D1FBBB9BA246},6/06/2010 10:15:01 AM,6/06/2010 10:15:01 AM,0,0x,ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'. These messages show the entire log generated for the failed run, for a successful run the output is typically ~2500 lines. I can see that the package is hanging during the initialize operation on the Callista connection (ORACLE database). I have not been able to work out a way to either fix this issue or have the package die gracefully (an error to the log would be A-OK with me). Any help or advice would be greatly appreciated.

  Read the article

• Server side Xforms form validation and integration into ASP.NET

  - by Nigel

  I have recently been investigating methods of creating web-based forms for an ASP.NET web application that can be edited and managed at runtime. For example an administrator might wish to add a new validation rule or a new set of fields. The holy grail would provide a means of specifying a form along with (potentially very complex) arbitrary validation rules, and allocation of data sources for each field. The specification would then be used to update the deployed form in the web application which would then validate submissions both on the client side and on the server side. My investigations led me to Xforms and a number of technologies that support it. One solution appears to be IBM Lotus Forms, but this requires a very large investment in terms of infrastructure, which makes it infeasible, although the forms designer may be useful as a stand-alone tool for creating the forms. I have also discounted browser plug-ins as the form must be publicly visible and cross-browser compliant. I have noticed that there are numerous javascript libraries that provide client side implementations given an Xforms schema. These would provide a partial solution but server side validation is still a requirement. Another option seems to involve the use of server side solutions such as the Java application Orbeon. Orbeon provides a tool for specifying the forms (although not as rich as Lotus Forms Designer), but the most interesting point is that it can translate an XForms schema into an XHTML form complete with validation. The fact that it is written in Java is not a big problem if it is possible to integrate with the existing ASP.NET application. So my question is whether anyone has done this before. It sounds like a problem that should have been solved but is inherently very complex. It seems possible to use an off-the-shelf tool to design the form and export it to an Xforms schema and xhtml form, and it seems possible to take that xforms schema and form and publish it using a client side library. What seems to be difficult is providing a means of validating the form submission on the server side and integrating the process nicely with .NET (although it seems the .NET community doesn't involve themselves with XForms; please correct me if I'm wrong on this count). I would be more than happy if a product provided something simple like a web service that could validate a submission against a schema. Maybe Orbeon does this but I'd be grateful if somebody in the know could point me in the right direction before I research it further. Many thanks.

  Read the article

• How can I extract paragaphs and selected lines with Perl?

  - by neversaint

  I have a text where I need to: to extract the whole paragraph under the section "Aceview summary" until the line that starts with "Please quote" (not to be included). to extract the line that starts with "The closest human gene". to store them into array with two elements. The text looks like this (also on pastebin): AceView: gene:1700049G17Rik, a comprehensive annotation of human, mouse and worm genes with mRNAs or ESTsAceView. <META NAME="title" CONTENT=" AceView: gene:1700049G17Rik a comprehensive annotation of human, mouse and worm genes with mRNAs or EST"> <META NAME="keywords" CONTENT=" AceView, genes, Acembly, AceDB, Homo sapiens, Human, nematode, Worm, Caenorhabditis elegans , WormGenes, WormBase, mouse, mammal, Arabidopsis, gene, alternative splicing variant, structure, sequence, DNA, EST, mRNA, cDNA clone, transcript, transcription, genome, transcriptome, proteome, peptide, GenBank accession, dbest, RefSeq, LocusLink, non-coding, coding, exon, intron, boundary, exon-intron junction, donor, acceptor, 3'UTR, 5'UTR, uORF, poly A, poly-A site, molecular function, protein annotation, isoform, gene family, Pfam, motif ,Blast, Psort, GO, taxonomy, homolog, cellular compartment, disease, illness, phenotype, RNA interference, RNAi, knock out mutant expression, regulation, protein interaction, genetic, map, antisense, trans-splicing, operon, chromosome, domain, selenocysteine, Start, Met, Stop, U12, RNA editing, bibliography"> <META NAME="Description" CONTENT= " AceView offers a comprehensive annotation of human, mouse and nematode genes reconstructed by co-alignment and clustering of all publicly available mRNAs and ESTs on the genome sequence. Our goals are to offer a reliable up-to-date resource on the genes, their functions, alternative variants, expression, regulation and interactions, in the hope to stimulate further validating experiments at the bench "> <meta name="author" content="Danielle Thierry-Mieg and Jean Thierry-Mieg, NCBI/NLM/NIH, [email protected]"> <!-- var myurl="av.cgi?db=mouse" ; var db="mouse" ; var doSwf="s" ; var classe="gene" ; //--> However I am stuck with the following script logic. What's the right way to achieve that? #!/usr/bin/perl -w my $INFILE_file_name = $file; # input file name open ( INFILE, '<', $INFILE_file_name ) or croak "$0 : failed to open input file $INFILE_file_name : $!\n"; my @allsum; while ( <INFILE> ) { chomp; my $line = $_; my @temp1 = (); if ( $line =~ /^ AceView summary/ ) { print "$line\n"; push @temp1, $line; } elsif( $line =~ /Please quote/) { push @allsum, [@temp1]; @temp1 = (); } elsif ($line =~ /The closest human gene/) { push @allsum, $line; } } close ( INFILE ); # close input file # Do something with @allsum There are many files like that I need to process.

  Read the article

• How do I verify a DKIM signature in PHP?

  - by angrychimp

  I'll admit I'm not very adept at key verification. What I have is a script that downloads messages from a POP3 server, and I'm attempting to verify the DKIM signatures in PHP. I've already figured out the body hash (bh) validation check, but I can't figure out the header validation. http://www.dkim.org/specs/rfc4871-dkimbase.html#rfc.section.6.1.3 Below is an example of my message headers. I've been able to use the Mail::DKIM package to validate the signature in Perl, so I know it's good. I just can't seem to figure out the instructions in the RFC and translate them into PHP code. DomainKey-Signature: q=dns; a=rsa-sha1; c=nofws; s=angrychimp-1.bh; d=angrychimp.net; h=From:X-Outgoing; b=RVkenibHQ7GwO5Y3tun2CNn5wSnooBSXPHA1Kmxsw6miJDnVp4XKmA9cUELwftf9 nGiRCd3rLc6eswAcVyNhQ6mRSsF55OkGJgDNHiwte/pP5Z47Lo/fd6m7rfCnYxq3 DKIM-Signature: v=1; a=rsa-sha1; d=angrychimp.net; s=angrychimp-1.bh; c=relaxed/simple; q=dns/txt; [email protected]; t=1268436255; h=From:Subject:X-Outgoing:Date; bh=gqhC2GEWbg1t7T3IfGMUKzt1NCc=; b=ZmeavryIfp5jNDIwbpifsy1UcavMnMwRL6Fy6axocQFDOBd2KjnjXpCkHxs6yBZn Wu+UCFeAP+1xwN80JW+4yOdAiK5+6IS8fiVa7TxdkFDKa0AhmJ1DTHXIlPjGE4n5; To: [email protected] Message-ID: From: DKIM Tester Reply-To: [email protected] Subject: Automated DKIM Testing (angrychimp.net) X-Outgoing: dhaka Date: Fri, 12 Mar 2010 15:24:15 -0800 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline MIME-Version: 1.0 Return-Path: [email protected] X-OriginalArrivalTime: 12 Mar 2010 23:25:50.0326 (UTC) FILETIME=[5A0ED160:01CAC23B] I can extract the public key from my DNS just fine, and I believe I'm canonicalizing the headers correctly, but I just can't get the signature validated. I don't think I'm preparing my key or computing the signature validation correctly. Is this something that's possible (do I need pear extensions or something?) or is manually validating a DKIM signature in PHP just not feasible?

  Read the article

• Django: CharField with fixed length, how?

  - by Giovanni Di Milia

  Hi everybody, I wold like to have in my model a CharField with fixed length. In other words I want that only a specified length is valid. I tried to do something like volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) but it gives me an error (it seems that I can use both max_length and min_length at the same time). Is there another quick way? Thanks EDIT: Following the suggestions of some people I will be a bit more specific: My model is this: class Volume(models.Model): vid = models.AutoField(primary_key=True) jid = models.ForeignKey(Journals, db_column='jid', null=True, verbose_name = "Journal") volumenumber = models.CharField('Volume Number') date_publication = models.CharField('Date of Publication', max_length=6, blank=True) class Meta: db_table = u'volume' verbose_name = "Volume" ordering = ['jid', 'volumenumber'] unique_together = ('jid', 'volumenumber') def __unicode__(self): return (str(self.jid) + ' - ' + str(self.volumenumber)) What I want is that the volumenumber must be exactly 4 characters. I.E. if someone insert '4b' django gives an error because it expects a string of 4 characters. So I tried with volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) but it gives me this error: Validating models... Unhandled exception in thread started by <function inner_run at 0x70feb0> Traceback (most recent call last): File "/Library/Python/2.5/site-packages/django/core/management/commands/runserver.py", line 48, in inner_run self.validate(display_num_errors=True) File "/Library/Python/2.5/site-packages/django/core/management/base.py", line 249, in validate num_errors = get_validation_errors(s, app) File "/Library/Python/2.5/site-packages/django/core/management/validation.py", line 28, in get_validation_errors for (app_name, error) in get_app_errors().items(): File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 131, in get_app_errors self._populate() File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 58, in _populate self.load_app(app_name, True) File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 74, in load_app models = import_module('.models', app_name) File "/Library/Python/2.5/site-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/Users/Giovanni/src/djangoTestSite/../djangoTestSite/journaldb/models.py", line 120, in <module> class Volume(models.Model): File "/Users/Giovanni/src/djangoTestSite/../djangoTestSite/journaldb/models.py", line 123, in Volume volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) TypeError: __init__() got an unexpected keyword argument 'min_length' That obviously doesn't appear if I use only "max_length" OR "min_length". I read the documentation on the django web site and it seems that I'm right (I cannot use both together) so I'm asking if there is another way to solve the problem. Thanks again

  Read the article

• Authorizing a computer to access a web application

  - by HackedByChinese

  I have a web application, and am tasked with adding secure sign-on to bolster security, akin to what Google has added to Google accounts. Use Case Essentially, when a user logs in, we want to detect if the user has previously authorized this computer. If the computer has not been authorized, the user is sent a one-time password (via email, SMS, or phone call) that they must enter, where the user may choose to remember this computer. In the web application, we will track authorized devices, allowing users to see when/where they logged in from that device last, and deauthorize any devices if they so choose. We require a solution that is very light touch (meaning, requiring no client-side software installation), and works with Safari, Chrome, Firefox, and IE 7+ (unfortunately). We will offer x509 security, which provides adequate security, but we still need a solution for customers that can't or won't use x509. My intention is to store authorization information using cookies (or, potentially, using local storage, degrading to flash cookies, and then normal cookies). At First Blush Track two separate values (local data or cookies): a hash representing a secure sign-on token, as well as a device token. Both values are driven (and recorded) by the web application, and dictated to the client. The SSO token is dependent on the device as well as a sequence number. This effectively allows devices to be deauthorized (all SSO tokens become invalid) and mitigates replay (not effectively, though, which is why I'm asking this question) through the use of a sequence number, and uses a nonce. Problem With this solution, it's possible for someone to just copy the SSO and device tokens and use in another request. While the sequence number will help me detect such an abuse and thus deauthorize the device, the detection and response can only happen after the valid device and malicious request both attempt access, which is ample time for damage to be done. I feel like using HMAC would be better. Track the device, the sequence, create a nonce, timestamp, and hash with a private key, then send the hash plus those values as plain text. Server does the same (in addition to validating the device and sequence) and compares. That seems much easier, and much more reliable.... assuming we can securely negotiate, exchange, and store private keys. Question So then, how can I securely negotiate a private key for authorized device, and then securely store that key? Is it more possible, at least, if I settle for storing the private key using local storage or flash cookies and just say it's "good enough"? Or, is there something I can do to my original draft to mitigate the vulnerability I describe?

  Read the article

• trouble with utf-8 chars & apache2 rewrite rules

  - by tixrus

  I see the post http://stackoverflow.com/questions/2565864/validating-utf-8-in-htaccess-rewrite-rule and I think that is great, but a more fundamental problem I am having first: I needed to expand to handle utf-8 chars for query string parameters, names of directories, files, and used in displays to users etc. I configured my Apache with DefaultCharset utf-8 and also my php if that matters. My original rewrite rule filtered everything except regular A-Za-z and underscore and hyphen. and it worked. Anything else would give you a 404 (which is what I want!) Now, however it seems that everything matches, including stuff I don't want, however, although it seems to match it doesn't go in the query string unless it is a regular A-Za-z_- character string. I find this confusing, because the rule says put whatever you matched into the query string: Here is the original rule: RewriteRule ^/puzzle/([A-Za-z_-]+)$ /puzzle.php?g=$1 [NC] and here is the revised rule: RewriteRule ^/puzzle/(\w+)$ /puzzle.php?g=$1 [NC] I made the change because somewhere I read that \w matches ALL the alpha chars where as A-Zetc. only matches the ones without accents and stuff. It doesn't seem to matter which of those rules I use: Here is what happens: In the application I have this: echo $_GET['g']; If I feed it a url like http://mydomain.com/puzzle/USA it echoes out "USA" and works fine. If I feed it a url like http://mydomain.com/puzzle/México it echoes nothing for that and warns me that index g is not defined and of course doesn't get resources for Mexico. if I feed it a url like http://mydomain.com/puzzle/fuzzle/buzzle/j.qle it does the same thing. This last case should be a 404! And it does this no matter which of the above rules I use. I configured a rewrite log RewriteLogLevel 5 RewriteLog /opt/local/apache2/logs/puzzles.httpd.rewrite but it is empty. Here is from the regular access log (it gives a status of 200) [26/May/2010:11:21:42 -0700] "GET /puzzle/M%C3%A9xico HTTP/1.1" 200 342 [26/May/2010:11:21:54 -0700] "GET /puzzle/M/l.foo HTTP/1.1" 200 342 What can I do to get these $%#$@(*#@!!! characters but not slash, dot or other non-alpha into my program, and once there, will it decode them correctly??? Would posix char classes work any better? Is there anything else I need to configure?

  Read the article

• Getting started with XSD validation with C#

  - by Rosarch

  Here is my first attempt at validating XML with XSD. The XML file to be validated: <?xml version="1.0" encoding="utf-8" ?> <config xmlns="Schemas" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="config.xsd"> <levelVariant> <filePath>SampleVariant</filePath> </levelVariant> <levelVariant> <filePath>LegendaryMode</filePath> </levelVariant> <levelVariant> <filePath>AmazingMode</filePath> </levelVariant> </config> The XSD, located in "Schemas/config.xsd" relative to the XML file to be validated: <?xml version="1.0" encoding="utf-8" ?> <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"> <xs:element name="config"> <xs:complexType> <xs:sequence> <xs:element name="levelVariant"> <xs:complexType> <xs:sequence> <xs:element name="filePath" type="xs:anyURI"> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:sequence> </xs:complexType> </xs:element> </xs:schema> Right now, I just want to validate the XML file precisely as it appears currently. Once I understand this better, I'll expand more. Do I really need so many lines for something as simple as the XML file as it currently exists? The validation code in C#: public void SetURI(string uri) { XElement toValidate = XElement.Load(Path.Combine(PATH_TO_DATA_DIR, uri) + ".xml"); // begin confusion string schemaURI = toValidate.Attributes("xmlns").First().ToString() + toValidate.Attributes("xsi:noNamespaceSchemaLocation").First().ToString(); XmlSchemaSet schemas = new XmlSchemaSet(); schemas.Add("", XmlReader.Create( SOMETHING )); XDocument toValidateDoc = new XDocument(toValidate); toValidateDoc.Validate(schemas, null); // end confusion root = toValidate; } Any illumination would be appreciated.

  Read the article

• How to make efficient code emerge through unit testing

  - by Jean

  Hi, I participate in a TDD Coding Dojo, where we try to practice pure TDD on simple problems. It occured to me however that the code which emerges from the unit tests isn't the most efficient. Now this is fine most of the time, but what if the code usage grows so that efficiency becomes a problem. I love the way the code emerges from unit testing, but is it possible to make the efficiency property emerge through further tests ? Here is a trivial example in ruby: prime factorization. I followed a pure TDD approach making the tests pass one after the other validating my original acceptance test (commented at the bottom). What further steps could I take, if I wanted to make one of the generic prime factorization algorithms emerge ? To reduce the problem domain, let's say I want to get a quadratic sieve implementation ... Now in this precise case I know the "optimal algorithm, but in most cases, the client will simply add a requirement that the feature runs in less than "x" time for a given environment. require 'shoulda' require 'lib/prime' class MathTest < Test::Unit::TestCase context "The math module" do should "have a method to get primes" do assert Math.respond_to? 'primes' end end context "The primes method of Math" do should "return [] for 0" do assert_equal [], Math.primes(0) end should "return [1] for 1 " do assert_equal [1], Math.primes(1) end should "return [1,2] for 2" do assert_equal [1,2], Math.primes(2) end should "return [1,3] for 3" do assert_equal [1,3], Math.primes(3) end should "return [1,2] for 4" do assert_equal [1,2,2], Math.primes(4) end should "return [1,5] for 5" do assert_equal [1,5], Math.primes(5) end should "return [1,2,3] for 6" do assert_equal [1,2,3], Math.primes(6) end should "return [1,3] for 9" do assert_equal [1,3,3], Math.primes(9) end should "return [1,2,5] for 10" do assert_equal [1,2,5], Math.primes(10) end end # context "Functionnal Acceptance test 1" do # context "the prime factors of 14101980 are 1,2,2,3,5,61,3853"do # should "return [1,2,3,5,61,3853] for ${14101980*14101980}" do # assert_equal [1,2,2,3,5,61,3853], Math.primes(14101980*14101980) # end # end # end end and the naive algorithm I created by this approach module Math def self.primes(n) if n==0 return [] else primes=[1] for i in 2..n do if n%i==0 while(n%i==0) primes<<i n=n/i end end end primes end end end

  Read the article

• converting code from not CPS to CPS (CPS aka Continuation Passing Style aka Continuations)

  - by Delirium tremens

  before: function sc_startSiteCompare(){ var visitinguri; var validateduri; var downloaduris; var compareuris; var tryinguri; sc_setstatus('started'); visitinguri = sc_getvisitinguri(); validateduri = sc_getvalidateduri(visitinguri); downloaduris = new Array(); downloaduris = sc_generatedownloaduris(validateduri); compareuris = new Array(); compareuris = sc_generatecompareuris(validateduri); tryinguri = 0; sc_finishSiteCompare(downloaduris, compareuris, tryinguri); } function sc_getvisitinguri() { var visitinguri; visitinguri = content.location.href; return visitinguri; } after (I'm trying): function sc_startSiteCompare(){ var visitinguri; sc_setstatus('started'); visitinguri = sc_getvisitinguri(sc_startSiteComparec1); } function sc_startSiteComparec1 (visitinguri) { var validateduri; validateduri = sc_getvalidateduri(visitinguri, sc_startSiteComparec2); } function sc_startSiteComparec2 (visitinguri, c) { var downloaduris; downloaduris = sc_generatedownloaduris(validateduri, sc_startSiteComparec3); } function sc_startSiteComparec3 (validateduri, c) { var compareuris; compareuris = sc_generatecompareuris(downloaduris, validateduri, sc_startSiteComparec4); } function sc_startSiteComparec4 (downloaduris, compareuris, validateduri, c) { var tryinguri; tryinguri = 0; sc_finishSiteCompare(downloaduris, compareuris, tryinguri); } function sc_getvisitinguri(c) { var visitinguri; visitinguri = content.location.href; c(visitinguri); } What should the code above become? I need CPS, because I have XMLHttpRequests when validating uris, then downloading pages, but I can't use return statements, because I use asynchronous calls. Is there an alternative to CPS? Also, I'm having to pass lots of arguments to functions now. global in procedural code look like this / self in modular code. Any difference? Will I really have to convert from procedural to modular too? It's looking like a lot of work ahead.

  Read the article

• Confused as to how to validate spring mvc form, what are my options?

  - by Blankman

  Latest spring mvc, using freemarker. Hoping someone could tell me what my options are in terms of validating a form with spring mvc, and what the recommend way would be to do this. I have a form that doesn't map directly to a model, it has input fields that when posted, will be used to initialze 2 model objects which I will then need to validate, and if they pass I will save them. If they fail, I want to return back to the form, pre-fill the values with what the user entered and display the error messages. I have read here and there about 2 methods, once of which I have done and understand how it works: @RequestMapping(...., method = RequestMethod.POST) public ModelAndView myMethod(@Valid MyModel, BindingResult bindingResult) { ModelAndView mav = new ModelAndView("some/view"); mav.addObject("mymodel", myModel); if(bindingResult.hasErrors()) { return mav; } } Now this worked if my form mapped directly to the form, but in my situation I have: form fields that don't map to any specific model, they have a few properties from 2 models. before validation occurrs, I need to create the 2 models manually, set the values from the values from the form, and manually set some properties also: Call validate on both models (model1, model2), and append these error messages to the errors collection which I need to pass back to the same view page if things don't work. when the form posts, I have to do some database calls, and based on those results may need to add additional messages to the errors collection Can someone tell me how to do this sort of validation? Pseudo code below: Model1 model1 = new Model1(); Model2 model2 = new Model2(); // manually or somehow automatically set the posted form values to model1 and model2. // set some fields manually, not from posted form model1.setProperty10(GlobalSettings.getDefaultProperty10()); model2.setProperty11(GlobalSettings.getDefaultProperty11()); // db calls, if they fail, add to errors collection if(bindingResult.hasErrors()) { return mav; } // validation passed, save Model1Service.save(model1); Model2Service.save(model2); redirect to another view Update I have using the JSR 303 annotations on my models right now, and it would great if I can use those still. Update II Please read the bounty description below for a summary of what I am looking for.

  Read the article

• How to fine tune a Membership Provider?

  - by Venemo

  After all the answers to my last question about fine-tuning turned out to be more useful than I expected, I thought that I would ask another similar Question about the MembershipProviders as well. Okay, so firstly, to clarify: I know what a Membership, Role, and Profile provider is, how to implement my own, and how to configure them, and most of the things about them. Implementing a role and profile provider is pretty straightforward, because they only require simple CRUD most of the time. (A single line of LINQ is enough for about half of the RoleProvider's methods.) However, the Membership provider is a differend beast. Many of you may realize that it violates the SR (Single Responsibility) principle, because it has to do EVERYTHING related to user management. While this leaves a lot of room for customizations, it has its downsides as well. There is no information on the Internet about what their EXACT expected behaviour is, such as when should they throw exceptions or simply return null, and stuff like that. I use this sample implementation for reference, but it also contains several contradictions. For example, it uses its own ValidateUser method for checking for credentials in the ChangePassword method. But the ValidateUser also updates the user's LastLoginDate to the current date. So, does the framework expect that I set it in my own provider as well, or is it simply a mistake in the sample? The other is: the ChangePassword method throws an exception every time when validating the new password, but CreateUser doesn't ever throw an exception, it simply returns false. And last, but not least: it counts the invalid password attempts of the user and locks them if it passes a threshold. While this is good, but it requires manual action to unlock the users. Is it a problem if my provider automatically unlocks the user after a certain amount of time? (EDIT) I almost forgot: the CreateUser method in the sample inserts the ID from the method parameter. I actually think this is bad practice, because I use inters with auto incement as IDs, so inserting them from some method parameter is not an option. Should I just ignore the parameter, or require that its value is null and throw an exception if it isn't? All in all, does ASP.NET have any assumptions about the behaviour of a MembershipProvider? Is there any documentation which describes when should I throw an exception or just return null? I also tried to find a set of generic unit tests which would provide some guidance about the expected behaviour, but no luck, I found plenty of articles about "Unit testing is good", and "How to unit test a MembershipProvider", but not one where there would be any actual tests. Thanks in advance for everyone!

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24  | Next Page >