Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 21/372 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

  • constantly crash on video card

    - by Jason Paddle
    I have this problem with my graphic-card(video card). Video card constantly crash because driver stopped. This is the massage that i get: Display driver stopped responding and has recovered. Display driver NVIDIA Windows Kernel Mode Driver , Version 285.62 stopped responding and has successfully recovered. Video card : MSI GTX470 Twin Frozr Motherboard:Asus P8Z68 V-Pro Tried reinstalling drivers but doesn't help. Any ideas what can be ?

    Read the article

  • How can we connect TP-link Access Point- TL-WA5210G with Wifi Lan card?

    - by PPS
    I would like to know that, We have a small Wireless Network that covers 40 mtrs indoor. Now we plan to expand our Network Coverage area apporx. 200 Mtrs (Outdoor). Due to our requirement we used TP- Link Access Point TL-WA5210G Outdoor(This AP covers 15Km area). We have 3 blocks between 200 mtrs, We like to connect all the laptops Lan Card directly with required Access-point. What should we do to achieve this, right now we are not getting the full strength signal, when we cross the 80 mtrs. So please suggest me proper configuration for implementing this TP-Link access point. Thanks PPS

    Read the article

  • route lan traffic through wirless mifi

    - by Randall Blake
    I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

    Read the article

  • Inspiron N7110 Ubuntu 12.04 Poor WiFi Signal

    - by Joseph Risley
    Sorry if this is a repeat, I have been Googling possible answers and have not found one yet. I find my wireless signal is never 100%. Speed is fine, it's the actual signal strength that is the issue. I thought my router was the issue, but the problem was also present at the public library today. I asked the Windows and Mac users around me about their signal strength and they had full signal while mine was medium to low according to WiFiRadar. Is this a Dell problem (Realtek), or an Ubuntu problem I can fix in the terminal?

    Read the article

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • My laptop causes the wireless router to stop working

    - by Pier
    hello all, it's happening something strange to my wireless connection. The wireless connection works fine with all the devices at home, except with my laptop (Toshiba satellite, WIN 7 64): as I start it, the wireless network shuts off and the connection disappears also for the other devices. I can use internet only plugging the laptop with an ethernet cable, and I have to shut off the wireless card, to allow the other people in the house to use the wireless connection. I tried to update the firmware (it is a D-Link DIR 615) but it's up to date, and reconfigure the router, but all indicates that the problem is caused by my laptop. I'm currently doing an antivirus scanning, but the computer seems to be clean. Any suggestion?

    Read the article

  • Booting From VIA VT6421A Based PCI SATA Card

    - by Priyan R
    I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

    Read the article

  • How do I turn a router into a wireless bridge

    - by Rob Cowell
    I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

    Read the article

  • How do I turn a router into a wireless bridge

    - by Rob Cowell
    I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

    Read the article

  • Wireless networking on Gnome on Ubuntu 9 / 10

    - by WaveyDavey
    So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

    Read the article

  • Upgrading my home network to Gigabit Ethernet and Wireless-N turns out slower than before

    - by Raheel Khan
    My home network has three desktops, three laptops and some NAS drives. All desktops and NAS drives support Gigabit LAN and all laptops support Wireless-N. I was running a 100 BaseT switch though. I recently purchased a Gigabit Ethernet Switch and an Wireless-N ADSL Modem-Router. After upgrading, I noticed that the wireless file transfer speeds from laptop-to-NAS and vice versa became terribly slow. Possibly even slower than before the upgrade. The transfer speeds from desktop-to-NAS (wired) have improved though. As an example, copying a 50GB file from laptop-to-NAS was estimated at 15 hours! Is there something I can do to improve this? Also, should I consider buying a dedicated wireless access point for speed rather than using the Wireless modem-router?

    Read the article

  • Wireless is not currently enabled

    - by ikartik90
    I have a HP Pavilion TX2000 tablet PC with me with windows 7 OS running on it. I used to access the Internet using my D-Link DIR 615 wireless adapter on the tablet and it used to work quite fine until one day, when I hibernated my Windows 7, the wireless went off and the problem seems to persist even after my hard efforts to clear it. I checked if the router works fine, and yes it did as my iPod was still catching wireless signals on the other hand, when I checked mu device manager, I realized that I now had no wireless driver. I checked on HP's website for one, but ironically even they didn't have wireless drivers meant for my tablet for Windows 7. Please help me find a solution to this problem. Further queries will be entertained as frequently as possible. Thanks.

    Read the article

  • Second video card (PCI) under Windows 7

    - by dbkk101
    I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

    Read the article

  • Bootable SD card still has small memory, even after formating

    - by Inazuma
    I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

    Read the article

  • Windows 7 Wireless Network Adapter Stopped Working

    - by Andrew B Schultz
    I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • Bridging wireless and wired networks on Linux box

    - by nixnotwin
    I have the following setup: modem + router - - - - -Ubuntu box on master mode.........wireless devises. Ubuntu machine connects to Internet on wired network. I've dhcp3-server, masquerading, and wireless card with master mode on Ubuntu box. The issue is Ubuntu connects to the router on NAT. The wireless devises connect to the Ubuntu box on a NAT too (though different). SO my wireless devises are behind two NAT networks. The solution I am looking for is Ubuntu should forward dhcp requests to the modem+router, and Ubuntu should act as a switch or a bridge that allows wireless devises to connect to the wired network. So the modem+router should act a main router.

    Read the article

  • Laptop connects to other network but not to my home wireless

    - by Nilesh
    My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

    Read the article

  • What type of wireless adapter for Verizon Fios?

    - by ShoeLace1291
    I have verizon fios internet service. I believe they use a Wireless G router, but I just have one question. I currently am using a 54mbps wireless pci adapter in my Windows 7 custom build. It drops the internet connection all the time and is starting to get very irritating. I'm thinking about buying a new one, but all the 300mbps cards on newegg are wireless n. So my question is, will a wireless n network adapter make a difference with a wireless g router?

    Read the article

  • Wireless only connects to Google

    - by dmanxiii
    I am using a netgear wireless router to connect to create a wireless network. When connected to the router via an Ethernet cable everything works correctly. When connecting to the router via wireless only Google can be accessed. I've done searches via Google using random words to make sure that it is not a cached page, and these all work. However, trying to connect to any non Google domain the page fails to load. I've accessed the connection with two different laptops, both are running Windows Vista. The network connection is strong on both, but the issue persists for both. Edit: I have configured the wireless networks name and password, and connect to that using the credentials I have defined. I am sure I am not connecting to a neighbors wireless network. Edit2: Typing in the direct IP address for CNN.com ( http://157.166.255.19 ) would not resolve.

    Read the article

  • Wireless slow, but very odd

    - by Logman
    I have a HP Pavilion dv6 laptop, internet through the wireless timeouts. Even though it connects fine to the AP/router. The computer had a virus (searchnu?) and I backed up the usual and restored the laptop to factory image. Problem is after the restore the internet through the wireless the same still... and connected via wired and everything worked fine. I was able to update the whole system. Internet worked perfect, speed great. But the wireless still was pitiful. Ping tests with wireless are interesting: Google= 18ms Gmail= 18ms Yahoo= 1023ms 8.8.8.8=30ms Microsoft= Request Timed Out Bing= Request Timed Out msn= Request Timed Out even though I get 18ms with google, the pages take a long time to load. Is this a root kit? is it the wireless card in the laptop?

    Read the article

  • video card for only watching videos

    - by Nothing 2 Lose
    I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

    Read the article

  • Linux will not activate wireless after device has been re-enabled

    - by XHR
    Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.

    Read the article

  • Enlarge partition on SD card

    - by chenwj
    I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

    Read the article

  • Multiplayer card game using PHP/Ajax and mysql

    - by Alireza Seifi
    I am designing a map game, using PHP and MYSQL. I don't know how to make the players who sign-in to the website to see other players who are also connected to the site and be able to chat with one another. I want to design the game in such a way that 2 players can play with each other and be able to send messages during the game while others groups are playing at the same time. I have designed the map game successfully, but the problem is making the player 1 who log-in to site to see the player 2 who will also log-in and both can get connected to play each other. http://i.stack.imgur.com/YyCPG.png I will appreciate your responses.

    Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >