Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 26/372 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

• Bridging with aliased Ethernet card for Virtualizing with single Ethernet card

  - by user113505

  We are having a server with good CPU and RAM,so we are planning to do XEN virtualization on ubuntu 12.04 server to handle high traffic. The plan is to keep the host machine only to manage VMs(no NAT ing). A New public IP will be assigned to that VM,For that i think we need a Bridge to external network(Since my Machine has only single ethernet card aliased with 4 different Pub IP's) Is it possible to create a bridge using aliased IP single ethernet card aliased to 4 pub IPs Do we need an additional Ethernet card to do Bridging.Only have ssh access to the machine. Any suggestions will be appreciated.

  Read the article

• Wifi hotspot disconnected after some time

  - by Rohit Bansal

  I am trying to use my Ubuntu system as Wifi Hotspot, but for some reason Hotspot get disconnected on its own. Searching for the solution, I found this help : Why is my ethernet connection connecting and disconnecting repeatedly? Reading through the above article I used the following command sudo killall dnsmasq as a result I manage to establish hotspot for around 5-10 sec before getting disconnected as against immediately.... Here's the system log (in case needed) tail -f /var/log/syslog : Apr 1 23:31:42 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:31:42 NetworkManager[901]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Apr 1 23:31:42 dnsmasq[4159]: started, version 2.57 cachesize 150 Apr 1 23:31:42 dnsmasq[4159]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:31:42 dnsmasq-dhcp[4159]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:31:42 dnsmasq[4159]: reading /etc/resolv.conf Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.6.104#53 Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.100.40#53 Apr 1 23:31:42 dnsmasq[4159]: cleared cache Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) successful, device activated. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Apr 1 23:31:42 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:31:42 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Connection established at this point....now disconnecting after 10 sec... Apr 1 23:31:52 ntpdate[4194]: adjust time server 91.189.94.4 offset -0.011589 sec Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): IP6 addrconf timed out or failed. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Apr 1 23:32:01 NetworkManager[901]: <warn> dnsmasq died with signal 9 Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: activated -> failed (reason 'sharing-start-failed') [100 120 18] Apr 1 23:32:01 dnsmasq[4235]: started, version 2.57 cachesize 150 Apr 1 23:32:01 dnsmasq[4235]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:32:01 dnsmasq-dhcp[4235]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed for access point (Reppify Ubuntu) Apr 1 23:32:01 dnsmasq[4235]: reading /etc/resolv.conf Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.6.104#53 Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.100.40#53 Apr 1 23:32:01 dnsmasq[4235]: cleared cache Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed. Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): deactivating device (reason 'none') [0] Apr 1 23:32:01 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:32:01 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Apr 1 23:32:01 NetworkManager[901]: <error> [1333303321.565351] [nm-device-wifi.c:1815] nm_device_wifi_set_mode(): (wlan0): error setting mode 2

  Read the article

• Logitech Unify... how to use both the keyboard abd mouse on the same receiver?

  - by simon

  I bought this keyboard : tinyurl.com/7g3l2wt and this mouse : tinyurl.com/7kvkldm I am trying to use both on the same receiver, but so far i can't figure it out! i have tried this : https://github.com/treeder/logitech_unifier But i don't know how to compile it! if i paste ' gcc -o unify unify.c ' in the terminal, then i got this: gcc: erreur: unify.c: Aucun fichier ou dossier de ce type gcc: erreur fatale: pas de fichier à l'entrée compilation terminée. sorry it is in french... it say no files of this type and no file in the input... anyone can tell me how to compile it and then find my hidraw devices?? thanks

  Read the article

• How much does it wear an SD card to be frequently removed/reinserted?

  - by jtbandes

  My digital camera (a Sony a55) stores photos on an SD card. When I want to transfer these to my computer (a mid-2010 MacBook Pro), I have two options: use the USB cable to connect the camera to the computer, or use the computer's built-in SD card reader. The camera's SD card slot is the standard click-in, click-out (spring-loaded) mechanism. My laptop has a simple slot into which the card slides with a little more resistance than the former (the card slides only about halfway in so it can be easily removed). I notice that the card's contacts now have some shiny marks from one or both of these card slots: Does this type of wear threaten to significantly damage the card? Should I avoid switching the card between slots frequently, to extend its lifetime?

  Read the article

• How to setup a wifi ap hotspot with ipv6 support?

  - by keyman

  How to setup a wifi ap (access point mode) hotspot, with IPv6 support? I've set up a hotspot according to the guide to wifi ap hotspot setup and it works fine. But via the hotspot I failed to visit IPv6 websites. How can I setup a hotspot able to share Ipv6 Internet access? Thanks! Further: Actually I've tried to setup IPv6 forwarding and masquerading. First enabling IPv6 forwarding: echo 1 | sudo tee net/ipv6/conf/default/forwarding Then I tried to execute: sudo ip6tables -t nat -A POSTROUTING -s 2001:db8:0:1::/64 -o eth0 -j MASQUERADE But it gave me an error: ip6tables v1.4.12: Couldn't load target `MASQUERADE':No such file or directory I searched through the Internet but I get confused. So I'm here for help. Thanks!

  Read the article

• Broadcom WiFi drivers conflict

  - by james

  $ sudo dpkg -i wireless-bcm43142-dkms-6.20.55.19_amd64.deb dpkg: acerca de wireless-bcm43142-dkms-6.20.55.19_amd64.deb que contiene wireless-bcm43142-oneiric-dkms: wireless-bcm43142-oneiric-dkms entra en conflicto con bcmwl-kernel-source bcmwl-kernel-source (versión 6.20.155.1+bdcom-0ubuntu0.0.2) está presente y instalado. dpkg: error al procesar wireless-bcm43142-dkms-6.20.55.19_amd64.deb (--install): paquetes en conflicto - no se instalará wireless-bcm43142-oneiric-dkms Se encontraron errores al procesar: wireless-bcm43142-dkms-6.20.55.19_amd64.deb Help me find a solution to install this .deb package.

  Read the article

• micro-SD card initialization using SPI interface

  - by Ron

  I'm using a micro-SD card in an embedded design. The card is connected to a microcontroller using the SPI interface. It worked fine for all cards I've used before, but now my new card will not initialize. The card is a Transcend 2GB micro-SD card (TS2GUSD). After sending the initial clock train to switch to SPI mode I do the following: 1) CMD0 (Argument 0, CRC 0x95) - Response 0x01 - OK 2) CMD8 (Argument 0x000001AA, CRC 0x87) - Response 0x01 0x000001AA - Means it's SDC V2+ card, the Voltage range 2.7V~3.6V is supported - OK Then I should send the ACMD41 command, but when sending the CMD55 (argument 0, CRC 0) that must precede CMD41, I get response 0x05 - Illegal Command. I've also tried to send CMD1 (for MMC cards), but it gives a similar Illegal Command response. The code works fine with my Sandisk 2GB micro-SD card. Does anyone have any idea? Thanks, -Ron-

  Read the article

• Creating a standard card game (iPhone SDK)

  - by Chris

  I am trying to create a card game with a standard deck of cards. I need to be able to create a new card on screen every time someone draws a card from the deck and then be able to continuously move it throughout gameplay. I have image files for every card available in the game. I have tried creating a card object which held a UIImageView for the card along with some other basic data but I had trouble referring back to that card to move it again after the first touch. Was this the right way to do this?

  Read the article

• Sony Vaio PCG-71315L "Wireless is disabled by hardware switch" Help!

  - by Luke Rossi

  I'm a new user to Ubuntu and Linux as a whole, I've had it for a few months and just as I'm starting to get a feel for things my wireless decided to quit on me. This puzzled me so i checked all the switches on the Vaio; my wireless switch was on (my bluetooth was also working), and in my windows partition the problem is non-existent. Help please? Anyways after executing the "rfkill list" command this was the outcome: 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no 2: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 4: hci0: Bluetooth Soft blocked: no Hard blocked: no As stated in the title my laptop is a Sony Vaio PCG-71315L

  Read the article

• How do I get wireless working on a Dell Inspiron 510m?

  - by user17449

  Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

  Read the article

• How do I select Wireless radio portions in Ubuntu?

  - by Ryan McClure

  Bear with me, to be honest I have no idea what Wireless radio portions are.... At my school, I was told my the user support that the wireless network in my dorm uses 801.11 A/B/G/N. For some reason, the wireless in my room doesn't work. However, other buildings use only A/B/G, they say. In any other building, my wireless works fine. How do I tell my system to use the G portion only? (As requested by user support in the email I received). Here are the various logs/output requested: dmesg lshw -c network lsmod

  Read the article

• How can I get wireless working on an HP-Mini 110-3150?

  - by jfmessier

  I just got an HP Mini 110-3150, and booting from an external hard disk with Ubuntu 10.10 works all fine, except that there is no wireless detected. I noticed that the Wireless indicator is red under Ubuntu, but is enabled under whatever Windows 7 I got on it. So, I understand that it may not get detected at all by Ubuntu at startup time, and there is no manual switch that I can simply slide to turn on/off. How can I get the Wireless device turned ON by default at startup time, and is there any special driver I need to install (proprietary or not) to get it working ? Merci :-) Update: When actually installing on the computer, as a new install, the NIC is not detected at first, but upon restarting, I get a notification of a closed driver available for the wireless. Once installed, updated and restarted, it works fine.

  Read the article

• How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

  - by Ivan Kreimer

  I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

  Read the article

• How do I disable the "enable/disable wireless" shortcut key on my laptop?

  - by Matthew

  On my Dell Studio XPS 16, I sometimes accidentally hit this key. Wireless becomes disabled, and hitting it again does not re-enable wireless. I have to hit it an odd number of times, then restart my computer to re-enable wireless. I can't imagine a situation in which I would want to disable wireless from my keyboard. Is it possible just disable the key all-together, so I can avoid this problem? On a related note, what package do I file the bug against? I'm happy just disabling the key, but that's really just a workaround.

  Read the article

• How can I make NetworkManager ignore my wireless card?

  - by ændrük

  I do not want NetworkManager to list or manipulate my wireless card. Can I hide its interface from NetworkManager somehow? I have tried adding this in /etc/network/interfaces, iface wlan0 inet static address 192.168.1.101 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid Synaptotagmin pre-up wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf post-down killall -q wpa_supplicant and this in /etc/NetworkManager/nm-system-settings.conf, [keyfile] unmanaged-devices=/org/freedesktop/Hal/devices/net_00_19_e0_57_86_af but NetworkManager Applet still lists and allows me to connect to wireless networks.

  Read the article

• How do I get my Lenovo T61 to connect to a wireless network?

  - by Ross Fleming

  I have a Lenovo Thinkpad T61 and the wireless works just fine so I installed Ubuntu straight away only to find that the wireless will not connect, it will see the networks but just not connect. Has anyone managed to solve this all the forums seem to relate to Ubuntu 9.04 and before. Edit:Sorry about that, I didn't realise that there were 2 models mine is the Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection. Any help is much appreciated.

  Read the article

• How can I make NetworkManager ignore my wireless card?

  - by ændrük

  I do not want NetworkManager to list or manipulate my wireless card. Can I hide its interface from NetworkManager somehow? I have tried adding this in /etc/network/interfaces, iface wlan0 inet static address 192.168.1.101 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid Synaptotagmin pre-up wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf post-down killall -q wpa_supplicant and this in /etc/NetworkManager/nm-system-settings.conf, [main] plugins=ifupdown,keyfile [ifupdown] managed=false [keyfile] unmanaged-devices=/org/freedesktop/Hal/devices/net_00_19_e0_57_86_af but NetworkManager Applet still lists and allows me to connect to wireless networks.

  Read the article

• How well does an INCA IM-201W Wireless work?

  - by Eray

  I'm using Ubuntu 11.04 . I'll buy a wireless modem, Inca IM-201W . But i'm looking supported OS of modem : Windows XP , Vista, 7 . There isn't Ubuntu in list.SO what's the meaning of this ? Shouldn't I buy this modem ? I will use wireless connection. (PS. Sometimes, while i'm trying to connect a Wireless network on any cafe, i'm having problem. My laptop isn't connecting to wireless networks sometimes . )

  Read the article

• How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

  - by MoLE

  I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

  Read the article

• Can realtek 8192cu usb wireless card be used in ubuntu 12.04 with kernel 3.2.0?

  - by waterloo2005

  I do like the post RTL8188CUS Wireless USB Dongle doesn't work unless I disable wireless security . But when I plug my 8192cu usb wireless card, my computer screen is off. At that time I even can not use Alt SysRq k or Alt SysRq + reisub. I compile the latest driver of 8192cu on ubuntu 12.04 with kernel 3.2.0-34. In RealTek site, I download 8192cu drive which is for Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8. But now in Ubuntu12.04 my kernel is 3.2.0-34. Every time I plug the usb 8192cu wireless card my system halts. Now I try to blacklist both the system's rtl8192cu driver and the new 8192cu driver I compile, but the system still halts when I plug the usb driver. What about you ? Thanks!

  Read the article

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• Wireless doesn't work for me in Lubuntu but does in Puppy?

  - by user54871

  I am new to GNU Linux. I have been having trouble getting wireless working on my installed system of Lubuntu 11.10. It sees my WPA network but cannot connect even when I remove the password. Looking around for a different distro that might replace it, I was amazed to find that Puppy was able to connect to my wireless network without trouble, running off a USB stick. So this makes me think that my Lubuntu wireless problem might be fixable so I don't have to have the major hassle of backing up all my documents etc before installing a different distro to the laptop. Can anyone suggest some steps that might help me to fix wireless on Lubuntu, perhaps using the fact it works with Puppy? Thanks. Rob

  Read the article

• How to set up dual wired and wireless connections?

  - by Col

  My laptop has both wireless and a wired connection capabilities. Can I connect to a router A using wireless and a separate router B using wired ethernet at the same time without having to switch back and forth? Thanks for replying so quickly. I wish to connect to two separate networks. The wireless connection is to router A which is connected to broadband internet. The wired connection is to router B which I wish to share files and a printer on 1 or 2 other desktops also using wired connections on B and maybe using synergy to have only one keyboard and mouse for 2 desktops. The wireless laptop is the only one required to have internet access.

  Read the article

• Wireless (Broadcom) just stopped working after putting machine to sleep!

  - by tommed

  Had the wireless working on my Dell Studio 15 for months now (Ubuntu 10.04 64bit, now 10.10 64bit). But I shut the lid this morning, which put the machine to sleep; when I openend it again the wireless would no longer connect to anything :'( I rebooted the machine, but that didn't help. I then did ifconfig eth1 {down,up}, but that didn't help, then I did iwconfig eth1 power {down,on}, but that didn't work. So I uninstalled the wireless driver (Broadcom STA) from additional drivers (reboot in the middle), but it still won't work anymore!! This is the trace from daemon.log, looks like it is a driver issue? Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - disconnected Nov 28 12:26:45 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:50 ulap wpa_supplicant[1295]: Trying to associate with MY_MAC_CODE (SSID='MY_WIRESS_SSID' freq=2417 MHz) Nov 28 12:26:50 ulap wpa_supplicant[1295]: Association request to the driver failed Nov 28 12:26:50 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - associating Nov 28 12:26:51 ulap wpa_supplicant[1295]: Associated with MY_MAC_CODE Nov 28 12:26:51 ulap NetworkManager[1218]: (eth1): supplicant connection state: associating - associated Nov 28 12:27:01 ulap wpa_supplicant[1295]: Authentication with MY_MAC_CODE timed out. Nov 28 12:27:01 ulap NetworkManager[1218]: (eth1): supplicant connection state: associated - disconnected Anyone seen this, or know how I can get around this issue? It had been working fine up until now?! Even ran update-manager, but there wasn't any changes to the wireless drivers (or any related networking areas). Running the most up-to-date version of 10.10 x64. My android phone and other devices are still working on the wireless.

  Read the article

• How do I enable wireless on HP Pavilion dm1?

  - by Dikla

  My wireless network is physically enabled and the "enable wireless" appears properly on the top menu, however checking it doesn't seem to have any affect. Anyone came across this problem? I have a new HP Pavilion dm1-4000, installed Ubuntu 11.10 yesterday. The wireless worked fine yesterday, today I've got nothing. It also seems to have problems with the wired connection, however I have no idea if it's related.

  Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >