Search Results

Search found 7216 results on 289 pages for 'low cost'.

Page 210/289 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• How to end a relationship with a client without pissing them off?

  - by thesam18888

  Here's my situation: I'm a freelancing student and I was working on a software project for a client over the summer holidays of 2010. At the time I completed the application, tested it on my machine, delivered it to the client and went back to University. However the client is not completely satisfied with the product and apparently has found a couple of bugs with it. Ever since I went back to Uni, they have been chasing me up and asking me to spend some time to fix the bugs. I have explained that this is simply not possible as I am extremely busy with my Uni work and cannot afford to spare my time for anything else. The client is getting increasingly pissed off and have been chasing me by calling during lectures at evenings and even asking me if I could go over to their place over the weekend to talk about this. This is in turn pissing me off as well because they're essentially asking me to give up my education so that I could help them out by fixing bugs. I go to Uni 5 days a week, 9-6 and feel it is unreasonable for them to call me during evenings and to ask me to work over weekends etc. I would like to end my relationship with this client but would like to do it amicably without pissing them off. How can I do this? I really wish they would just find someone else but I was charging them piss-poor rates so I think they don't want to go to anyone else because they would have to pay more. EDIT The application does not seem to work perfectly on their machine. I had tested it extensively on my machine and it seemed to work fine. I am not sure what exactly is causing it to not work. I was paid a very low amount and it was on an hourly basis. e.g. I would send an invoice saying I worked on this for x amount of hours and they would pay me for it. Apart from the work itself, I have not charged them for all the time spent sending e-mails back and forth, phone calls, visits to their place etc. I would really like to end all my dealings with this client right away.

  Read the article

• Your Cinnamon Roll & Morning Coffee: Powered by Oracle Enterprise Manager

  - by Ruma Sanyal

  1024x768 Truth be told, as I was getting my morning coffee today, I was pondering the recent election results more than Oracle [there, I said it]. But then an email from Glen Hawkins from the Enterprise Management team hit my Inbox and I started viewing this video. It was about the world’s largest convenience store chain, 7-Eleven, focusing on creating the best Digital Guest Experience (DGE) for their customers. Turns out that Oracle Enterprise Manager (OEM) powers 7-Eleven’s DGE Middleware Platform as a Service solution that consists of Oracle SOA Suite, Exalogic, and Exadata. “We need to present a consistent view of 7-Eleven across all our endpoints: 10,000 stores & various digital entities like our websites and apps”, said Ronald Clanton, the DGE Program Director for 7-Eleven. As 7-Eleven was rolling out a loyalty program with mobile support across multiple geos, it had many complex business & technical requirements, including supporting a wide variety of different apps, 10M guests in NA alone, ability to support high speed transactions, and very aggressive timelines. A key requirement was shortening the cycle for provisioning new environments. Whereas with other vendors this would take a few weeks, Oracle consulting showed them how with OEM provisioning new environments would take half a day, which was quite impressive. 7-Eleven has started to roll out this new program and are delighted to report that some provisioning cycles are as low as 10 minutes which includes provisioning the full Oracle SOA suite, Exalogic and more. They are delighted with OEM’s reporting capabilities and customization thereof. Watch the video to see for yourself. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• Part 5: Choose the right tool - or - why

  - by volker.eckardt(at)oracle.com

  Consider the following client request “Please create a report for us to list expenses”. Which Oracle EBS tool would you choose? There are plenty of options available: Oracle Reports, or BI Publisher with PDF or Excel layout, or Discoverer, or BI Publisher Stand Alone, or PDF online generation, or Oracle WebADI, or Plain SQL*Plus as Concurrent Program, or Online review option … Assuming, you as development lead have to decide, you may decide by available skill set in your development team. However, is this a good decision? An important question to influence the decision is the “Why” question: why do you need this report, what process is behind, what exactly you like to achieve? We see often data created or printed, although it would be much better to get the data in Excel, and upload changes via WebADI directly. There are more points that should drive your decision: How many of such requirements you have got? Has this technique been used in the project already? Are there related reusable’s you may gain from? How difficult is it to maintain your solution? Can you merge this report with another one, to reduce test and maintenance work? In addition, also your own development standards should guide you a bit to come to a good decision. In one of my own projects, we discussed such topics in our weekly team meeting. By utilizing the team knowledge best, you may come to a better decision, and additionally, your team supports your decision. Unfortunately, I have rarely seen dedicated team trainings or planned knowledge transfer to support such processes. Often the pressure to deliver on time is too high to have discussion and decision time left. But exactly this can help keeping maintenance costs low by limiting the number of alternative solutions for similar requirements. Lastly, design decisions should be documented to allow another person taking this over easily. Decisions shall be reviewed and updated regularly, to reflect related procedures or Oracle products respective product versions. Summary: Oracle EBS offers plenty of alternatives to implement customizations. Create and maintain a decision tree to support the design process. Do not leave the decision just on developer side. Limit the number of alternative solutions as best as possible; choose one which is the most appropriate also from future maintenance perspective.

  Read the article

• Problem Solving vs. Solution Finding

  - by ryanabr

  By enlarge, most developers fall into these two camps I will try to explain what I mean by way of example. A manager gives the developer a task that is communicated like this: “Figure out why control A is not loading on this form”. Now, right there it could be argued that the manager should probably have given better direction and said something more like: “Control A is not loading on the Form, fix it”. They might sound like the same thing to most people, but the first statement will have the developer problem solving the reason why it is failing. The second statement should have the developer looking for the solution to make it work, not focus on why it is broken. In the end, they might be the same thing, but I usually see the first approach take way longer than the second approach. The Problem Solver: The problem solver’s approach to fixing something that is broken is likely to take the error or behavior that is being observed and start to research it using a tool like Google, or any other search engine. 7/10 times this will yield results for the most common of issues. The challenge is in the other 30% of issues that will take the problem solver down the rabbit hole and cause them not to surface for days on end while every avenue is explored for the cause of the problem. In the end, they will probably find the cause of the issue and resolve it, but the cost can be days, or weeks of work. The Solution Finder: The solution finder’s approach to a problem will begin the same way the Problem Solver’s approach will. The difference comes in the more difficult cases. Rather than stick to the pure “This has to work so I am going to work with it until it does” approach, the Solution Finder will look for other ways to get the requirements satisfied that may or may not be using the original approach. For example. there are two area of an application of externally equivalent features, meaning that from a user’s perspective, the behavior is the same. So, say that for whatever reason, area A is now not working, but area B is working. The Problem Solver will dig in to see why area A is broken, where the Solution Finder will investigate to see what is the difference between the two areas and solve the problem by potentially working around it. The other notable difference between the two types of developers described is what point they reach before they re-emerge from their task. The problem solver will likely emerge with a triumphant “I have found the problem” where as the Solution Finder will emerge with the more useful “I have the solution”. Conclusion At the end of the day, users are what drives features in software development. With out users there is no need for software. In todays world of software development with so many tools to use, and generally tight schedules I believe that a work around to a problem that takes 8 hours vs. the more pure solution to the problem that takes 40 hours is a more fruitful approach.

  Read the article

• Oracle Brings Java to iOS Devices (and Android too)

  - by Shay Shmeltzer

  Java developer, did you ever wish that you can take your Java skills and apply them to building applications for iOS mobile devices? Well, now you can! With the new Oracle ADF Mobile solution, Oracle has created a unique technology that allows developers to use the Java language and develop applications that install and run on both iOS and Android mobile devices. The solution is based on a thin native container that installs as part of your application. The container is able to run the same application you develop unchanged on both Android and iOS devices. One part of the container is a headless lightweight JVM based on the Java ME CDC technology. This allows the execution of Java code on your mobile device. Java is used for building business logic, accessing local SQLite encrypted database, and invoking and interacting with remote services. Java concept on the UI too To further help transition Java developers to mobile developers, ADF Mobile borrows familiar concepts from the world of JSF to make the UI development experience simpler. The user interface layer of Oracle ADF Mobile is rendered with HTML5 which delivers native user experience on the devices, including animations and gesture support. Using a set of rich components, developers can create mobile pages without needing to write low level HTML5 and JavaScript code. The components cover everything from simple controls such as text fields, date pickers, buttons and links, to advanced data visualization components such as graphs, gauges and maps, and including unique mobile UI patterns such as lists, and toggle selectors. Want to see the components in action? Access this demo instance from your mobile device. Need to further customize the look and feel? You can use CSS3 to achieve this. A controller layer - similar in functionality to the JSF controller - allows developer to simplify the way they build navigation between pages. The logic behind the pages is written in managed beans with various scopes – again similar to the JSF approach. Need to interact with device features like camera, SMS, Contacts etc? Oracle conveniently packaged access to these services in a set of services that you can just drag and drop into your pages as buttons and links, or code into your managed beans Java calls to activate. Underneath the covers this layer is implemented using the open source phonegap solution. With the new Oracle ADF Mobile solution, transferring your Java skills into the Mobile world has become much easier. Check out this development experience demo. And then go and download JDeveloper and the ADF Mobile extension and try it out on your own. For more on ADF Mobile, see the ADF Mobile OTN page.

  Read the article

• Where does a "Technical Programmer" fit in, and what does the title mean? [closed]

  - by Mike E

  Was: "What is a 'Technical Programmer'"? I've noticed in job posting boards a few postings, all from European companies in the games industry, for a "Technical Programmer". The job description was similar, having to do with tools development, 3d graphics programming, etc. It seems to be somewhere between a Technical Artist who's more technical than artist or who can code, and a Technical Director but perhaps without the seniority/experience. Information elsewhere on the position is sparse. The title seems redundant and I haven't seen any American companies post jobs by that name, exactly. One example is this job posting on gamedev.net which isn't exactly thorough. In case the link dies: Subject: Technical Programmer Frictional Games, the creators of Amnesia: The Dark Descent and the Penumbra series, are looking for a talented programmer to join the company! You will be working for a small team with a big focus on finding new and innovating solutions. We want you who are not afraid to explore uncharted territory and constantly learn new things. Self-discipline and independence are also important traits as all work will be done from home. Some the things you will work with include: 3D math, rendering, shaders and everything else related. Console development (most likely Xbox 360). Hardware implementations (support for motion controls, etc). All coding is in C++, so great skills in that is imperative. Revised Summarised Question: So, where does a programmer of this nature fit in to software development team? If I had these on my team, what tasks am I expecting them to complete? Can I ask one to build a new level editor, or optimize the rendering engine? It doesn't seem to be a "tools programmer" which focuses on producing artist tools, often in high-level languages like C#, Python, or Java. Nor does it seem to be working directly on the engine, nor a graphics programmer, as such. Yet, a strong C++ requirement, which was mirrored in other postings besides this one I quoted. Edited To Add As far as it being a low-level programmer, I had considered that but lacking from the posting was a requirement of Assembly. Instead, they tend to require familiarity with higher-level hardware APIs such as DirectX, or DirectInput. I wasn't fully clear in my original post. I think, however, that Mathew Foscarini has it right in his answer, so barring someone who definitely works with or as a "Technical Programmer" stepping in to provide a clearer explanation, I'll go with that. A generalist, which also fits the description of a more-technical-than-artist TA.

  Read the article

• How to appear very professional on my first freelance project?

  - by iamserious

  I need some help on appearing very professional on my first freelance project. How / What should you do to achieve this? Background: I started as a full time web developer 18 months ago, two promotions later I am now a senior software engineer. I've never had any problems with designing / developing / coding a complicated system. I thought I could use some help for Christmas and I started bidding for a project and now I have one - from a very reputable lawyers association in London. I have no problem dealing with the actual implementation of the system, but I have no idea how to appear professional throughout the whole process. About the project: This lawyers association are starting a distant training courses and in addition to having a website to show off all their clients etc, they want a students area where their students would log in, download course materials allocated to them etc.. and an admin section where they assign courses to students / create new ones / upload materials etc.. Questions breakdown: 1) How should I start with the requirement gathering? Is using scrum a good idea, or should I use something like Volere Template - and what should I do with it? should I submit a copy to the client etc.. 2) How often should I meet the client? Would once a fortnight would be good? 3) What are the processes / protocols that I need to follow so that they would be satisfied with me and think that I am very professional 4) How much should I charge for the product? 5) How should I get a quote / contract / receipt for the whole project? 6) What are the steps that professional freelancers go through, during the life cycle of a project? My Research so far Looking at How much should I charge doesn't help.. I live in London, zone 1, though I have no idea how much a project of this size would cost. Help on this would be appreciated. How to be professional articles talks about the work / time management etc and not the actual process, what would real people do etc.. it's like academia theory, but not practical. If this needs revising, please let me know, do not close it because of whatever reason, I will edit the question or details to fit the needs. Thanks for reading a lengthy question.

  Read the article

• EBusiness Maintenace Wizard

  - by cwarticki

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Seriously folks, you'd be amazed by the power and functionality of this tool.  If you're an EBus customer, you must use the Maintenance Wizard.  I know customers that have logged 2000+ SRs doing EBus upgrades the hard way and others that have use the Maintenance Wizard and have performed production upgrades on 7 global instances with only a handful of SRs.  You decide which is better. Oh, btw......it's part of your Premier Support investment. No additional cost necessary. -Chris Warticki The Maintenance Wizard is an E-Business Suite upgrade tool that can guide you through the code line upgrade process from 11.5.10.2 to 12.1.3 with an 11gR2 database. Additionally, it includes maintenance features for most releases of E-Business Suite applications. The Tool: * Presents step-by-step upgrade and maintenance processes * Enables validation of each step, tracks the completion of the steps, and maintains a log and status * Is a multi-user tool that enables the System Administrator to give different users assignments based on any combination of category, product family or task * Automatically installs many required patches * Provides project management utilities to record the time taken for each task, completion status and project reporting For More Information: * Review Note 215527.1 for additional information on the Maintenance Wizard * See Note 430732.1 to download the new Patch Sincerely, Oracle Proactive Support Center

  Read the article

• How to be successful at BDD Specifications Workshops?

  - by sigo

  Today we tried to introduce BDD in our software development process by having a specification workshop. For this workshop we had 2 developers, 1 tester and 1 business analyst. The workshop lasted 1h30 and by the end of it we managed to figure out some BDD scenarios for our new feature. We tried to focus on finding the scenarios that we could miss, and the difficult ones. At the end of the workshop some people were actually unhappy with the workshop. One developer felt he wasted his time as he was used to be given out the scenarios directly by the business analyst and review them with her. The business analyst didn't feel confident with our scenario coverage (Had a feeling that we could have missed out other important stuff) but more importantly felt that this workshop was also a waste of time as she could have figured out all these scenarios by herself and in a shorter period of time. So my question is how that kind of workshop can actually work. In the theory, given you have a new feature to develop, you put the tree 'amigos' (dev/tester/ba) in the same room so that they can collaborate together on writing the differents requirements for the new feature using examples. I can see all the benefits from that. Specially in term of knowledge sharing and common product/end goal/done vision. But in practice, we still think it is more cost effective to first have a BA to work on his own on the examples and only then to have the scenarios to be reviewed/reworked by the 3 'amigos'. By having the BA to work on his own, we actually feel more confident that we are less going to miss out stuff + we still get to review the scenarios afterward to double check. We don't think than simple brainstorming/deliberate discovery is actually enought to seriously cover all the requirement for a feature. The business analyst is actually the best person for that kind of stuff. The thing we just do is to review what she wrote and see if then we have a common understanding (which could then lead to rewrite some of her scenarios or add new ones she could have missed). This workshop lasted 1h30, and by the end of it, we didn't feel confident enought about wha we did...sure we could have spent more time on it but honestly most people get exhausted after 1h30 of brainstorming. So how can you get that to work effectively in practice ?

  Read the article

• Unintentional run-in with C# thread concurrency

  - by geekrutherford

  For the first time today we began conducting load testing on a ASP.NET application already in production. Obviously you would normally want to load test prior to releasing to a production environment, but that isn't the point here.   We ran a test which simulated 5 users hitting the application doing the same actions simultaneously. The first few pages visited seemed fine and then things just hung for a while before the test failed. While the test was running I was viewing the performance counters on the server noting that the CPU was consistently pegged at 100% until the testing tool gave up.   Fortunately the application logs all exceptions including those unhandled to the database (thanks to log4net). I checked the log and low and behold the error was:   System.ArgumentException: An item with the same key has already been added. (The rest of the stack trace intentionally omitted)   Since the code was running with debug on the line number where the exception occured was also provided. I began inspecting the code and almost immediately it hit me, the section of code responsible for the exception is trying to initialize a static class. My next question was how is this code being hit multiple times when I have a rudimentary check already in place to prevent this kind of thing (i.e. a check on a public variable of the static class before entering the initializing routine). The answer...the check fails because the value is not set before other threads have already made it through.   Not being one who consistently works with threading I wasn't quite sure how to handle this problem. Fortunately a co-worker recalled having to lock a section of code in the past but couldn't recall exactly how. After a quick search on Google the solution is as follows:   Object objLock = new Object(); lock(objLock) { //logic requiring lock }   The lock statement takes an object and tells the .NET runtime that the current thread has exclusive access while the code within brackets is executing. Once the code completes, the lock is released for another thread to utilize.   In my case, I only need to execute the inner code once to initialize my static class. So within the brackets I have a check on a public variable to prevent it from being initialized again.

  Read the article

• Showing ZFS some LOVE

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} L is for the way you look at us, and O because we’re Oracle, but V is very, very, extra ordinary, and E, well that’s obvious… E is because Oracle’s new Sun ZFS Storage Appliance is Excellent, and here at OPN, we like spell out the obvious!  If you haven’t already heard, the Sun ZFS Appliance has “A simple, GUI-driven setup and configuration, solid price-performance and world-class Oracle support behind it. The CRN Test Center recommends the Sun ZFS Storage”. Read more about what CRN said here. Oracle's Sun ZFS Appliance family delivers enterprise-class network attached storage (NAS) capabilities with leading Oracle integration, simplicity, efficiency, performance, and TCO.  The systems offer an easy way to manage and expand your storage environment at a lower cost, with more efficiency, better data integrity, and higher performance when compared with competitive NAS offerings. Did we mention that set up, including configuring, will take you less than an hour since it all comes in one box and is so darn simple to use? So if you L-O-V-E what you’re hearing about Oracle’s Sun Z-F-S, learn more by watching the video below, and visiting any of our available resources . It Had to Be You, The OPN Communications Team

  Read the article

• Code Design question, circular reference across classes?

  - by dsollen

  I have no code here, as this is more of a design question (I assume this is still the best place to ask it). I have a very simple server in java which stores a mapping between certain values and UUID which are to be used by many systems across multiple platforms. It accepts a connection from a client and creates a clientSocket which stores the socket and all the other relevant data unique to that connection. Each clientSocket will run in their own thread and will block on the socket waiting for a read. I expect very little strain on this system, it will rarely get called, but when it does get a call it will need to respond quickly and due to the risk of it having a peak time with multiple calls coming in at once threaded is still better. Each thread has a reference to a Mapper class which stores the mapping of UUID which it's reporting to others (with proper synchronization of course). This all works until I have to add a new UUID to the list. When this happens I want to report to all clients that care about that particular UUID that a new one was added. I can't multicast (limitation of the system I'm running on) so I'm having each socket send the message to the client through the established socket. However, since each thread only knows about the socket it's waiting on I didn't have a clear method of looking up every thread/socket that cares about the data to inform them of the new UUID. Polling is out mostly because it seems a little too convoluted to try to maintain a list of newly added UUID. My solution as of now is to have the 'parent' class which creates the mapper class and spawns all the threads pass itself as an argument to the mapper. Then when the mapper creates a new UUID it can make a call to the parent class telling it to send out updates to all the other sockets that care about the change. I'm concerned that this may be a bad design due to the use of a circular reference; parent has a reference to mapper (to pass it to new ClientSocket threads) and mapper points to parent. It doesn't really feel like a bad design to me but I wanted to check since circular references are suppose to be bad. Note: I realize this means that the thread associated with whatever socket originally received the request that spawned the creation of a UUID is going to pay the 'cost' of outputting to all the other clients that care about the new UUID. I don't care about this; as I said I suspect the client to receive only intermittent messages. It's unlikely for one socket to receive multiple messages at one time, and there won't be that many sockets so it shouldn't take too long to send messages to each of them. Perhaps later I'll fix the fact that I'm saddling higher work load on whatever unfortunate thread gets the first request; but for now I think it's fine.

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• Keeping your options open in a cloud solution

  - by BuckWoody

  In on-premises solutions we have the full range of options open for a given computing solution – but we don’t always take advantage of them, for multiple reasons. Data goes in a Relational Database Management System, files go on a share, and e-mail goes to the Exchange server. Over time, vendors (including ourselves) add in functionality to one product that allow non-standard use of the platform. For example, SQL Server (and Oracle, and others) allow large binary storage in or through the system – something not originally intended for an RDBMS to handle. There are certainly times when this makes sense, of course, but often these platform hammers turn every problem into a nail. It can make us “lazy” in our design – we sometimes don’t take the time to learn another architecture because the one we’ve spent so much time with can handle what we want to do. But there’s a distinct danger here. In nature, when a population shares too many of the same traits, it can cause a complete collapse if a situation exploits a weakness shared by that population. The same is true with not using the righttool for the job in a computing environment. Your company or organization depends on your knowledge as a professional to select the best mix of supportable, flexible, cost-effective technologies to solve their problems, whether you’re in an architect role or not.  So take some time today to learn something new. The way I do this is to select a given problem, and try to solve it with a technology I’m not familiar with. For instance – create a Purchase Order system in Excel, then in Hadoop or MongoDB, or even in flat-files using PowerShell as an interface. No, I’m not suggesting any of these architectures are the proper way to solve the PO problem, but taking something concrete that you know well and applying that meta-knowledge to another platform will assist you in exercising the “little grey cells” and help you and your organization understand what is open to you. And of course you can do all of this on-premises – but my recommendation is to check out a cloud platform (my suggestion would of course be Windows Azure :) ) and try it there. Most providers (including Microsoft) provide free time to do that.

  Read the article

• Understanding the levels of computing

  - by RParadox

  Sorry, for my confused question. I'm looking for some pointers. Up to now I have been working mostly with Java and Python on the application layer and I have only a vague understanding of operating systems and hardware. I want to understand much more about the lower levels of computing, but it gets really overwhelming somehow. At university I took a class about microprogramming, i.e. how processors get hard-wired to implement the ASM codes. Up to now I always thought I wouldn't get more done if learned more about the "low level". One question I have is: how is it even possible that hardware gets hidden almost completely from the developer? Is it accurate to say that the operating system is a software layer for the hardware? One small example: in programming I have never come across the need to understand what L2 or L3 Cache is. For the typical business application environment one almost never needs to understand assembler and the lower levels of computing, because nowadays there is a technology stack for almost anything. I guess the whole point of these lower levels is to provide an interface to higher levels. On the other hand I wonder how much influence the lower levels can have, for example this whole graphics computing thing. So, on the other hand, there is this theoretical computer science branch, which works on abstract computing models. However, I also rarely encountered situations, where I found it helpful thinking in the categories of complexity models, proof verification, etc. I sort of know, that there is a complexity class called NP, and that they are kind of impossible to solve for a big number of N. What I'm missing is a reference for a framework to think about these things. It seems to me, that there all kinds of different camps, who rarely interact. The last few weeks I have been reading about security issues. Here somehow, much of the different layers come together. Attacks and exploits almost always occur on the lower level, so in this case it is necessary to learn about the details of the OSI layers, the inner workings of an OS, etc.

  Read the article

• vJUG: Worldwide Virtual JUG Created

  - by Tori Wieldt

  London Java Community leader and technical evangelist Simon Maple has created a Meetup called vJUG, with aim toward connecting Java Developers in the virtual world. The aim for vJUG is: Get technical leaders from around the world to present to the vJUG members (without travel cost concerns!). Work with local JUGs to provide worldwide content to their members and help JUGs present to a worldwide audience. Provide content to devs without access to a local JUG. Be a hub that will stream content from other JUG sessions live.  The vJUG is not intended to replace local JUG efforts. "The vJUG can never be, and will never be, as vibrant and valuable to its members as a proper local JUG can. Why? Because the true value in JUG meetings are the face to face interactions and personal networking," said Maple. "However, many people do not have access to a really active JUG with great speakers and awesome content. Or, like me, the closest JUG is about 90 mins away." WebEx and Google Hangouts are great, Maple explained, he hopes vJUG will provide more coordination of online events.  Maple hopes that in the future, vJUG will provide An Events calendar with reminders and links to up coming meetings. A Newsletter with what's coming up and links to previous sessions. Coordination of links to IRC channels which are active during presentations (to create a feeling of virtual community). Comments and forums around sessions and presentations A place where physical JUGs could advertise their sessions (i.e. a NY JUG event) to a worldwide audience, when streamed, via an event that people can sign up to. A common Webex or Hangout. Maple encourages both people who need a JUG and existing JUG members to join vJUG. "I'm looking forward to talking with many of you one to get members, speakers, and JUG support!" Join vJUG now! (I sense a need for a logo...) 

  Read the article

• Can Anything be Done to Make Improv (a 1993 Win 3.1 App) handle larger Files?

  - by user75185

  My very favorite spradsheet is Improv, a 1993 Windows 3.1 application. It still puts Excel to shame for building spreadsheets and writing formulas. The only problem is because Improv was written when 1 Meg of RAM was state of the art, it becomes unstable when working with larger spreadsheets and often crashes and/or corrupts the data file. I am working on a project that greatly exceeds Improv's limits. Although it will ultimately require more robust databasing capability, I could save a lot of critical time if I could delay that headache and continue working in Improv for now. To that end, I moved to the only product I could find that comes close, Quantrix, which is nothing more than Improv updated to handle large spreadsheets and utilize today's technologies. The problems with Quantrix are its speed (significantly slower than Improv) and its $1000 price (which I cannot afford). I have already had 3 15 day extensions after the initial 30 day trial, so my time to use Quantrix as a bridge is at its end. Searches for Improv over the years have gotten me nowhere and, not surprisingly after reading some posts on this site, I got nothing for the money and time invested to find a programmer to write code to "fix" this problem. Improv is freely available as "abandonware" at http://vetusware.com/download/LotusImprov2.1/?id=5797 , and the best background info can be found on Wikipedia and at "Moose's Greatest Software Products of All Time - Lotus Improv" http://moosevalley.fhost.com.au/mooses_review_page_lotus_improv.html It is critically urgent for me to focus on analyzing the data asap. Working in a stable Improv would, without question, be the fastest route. To that end, I am looking for answers to the following questions and anything else that might be helpful: 1) Is it lawful to hire someone to fix Improv for my own use? If so, 2) About how much should it cost? 3) About how long should it take? 4) What skills should I be looking for &/or how should a post be worded? 5) Is there a niche site where it should it be posted? 6) What questions can I ask to quickly screen candidates? Since I am not a programmer, I need questions the answers to which leave no room to confuse me, whether intentional or not. For example, what tools or players should someone with an acceptable competency level have knowledge of?

  Read the article

• iPhone app development pricing [closed]

  - by AlexMorley-Finch

  I currently manage a website design and development company that integrates itself with print work too. I've been co manager for a couple of months now, however business is slow at the moment. I got an email today from a potential client asking if we do iPhone app development. Obviously we do not. But, seeing as there aren't many other project on the go at the moment, why not give it a go? Searching Google was my first option. I did a bit of background scrubbing. Discovered that I need certain developer tools etc. This can be arranged easily enough. The reason I came to Stack Exchange is for answers to these questions. I am a competant programmer and have had experience in Java, PHP, JavaScript, C++ and C#. So how long would it take me to come to grips with Objective-C? Assuming an 8 hour working day. Not only the language but also the iPhone interface libraries (if any exist) and other native libraries? The potential client said the app will be a catalogue. So I'm assuming either the data will be pulled online or in some kind of local database. I know the requirements are vague but does anyone have any idea of how mug time this would take? To learn the language, design the architecture and code? 40 Hours? 80 Hours? My final question kind of depends on the first two. But obviously the potential client wants a quote. And I have got no idea how much an app costs. I did some research and found a huge range in differences. The majority of the cost would cone from the time to develops the app! So to summarise. How long would it take me to be comfortable coding Objective-C, taking into consideration my past knowledge? I'm assuming a day or two to fully understand but you really don't know. How long would it take me to develop an app? How much should I charge (approx) for the development of this app?

  Read the article

• The type of programmer I want to be [closed]

  - by Aventinus_

  I'm an undergraduate Software Engineer student, although I've decided that pure programming is what I want to do for the rest of my life. The thing is that programming is a vast field and although most of its aspects are extremely interesting, soon or later I'll have to choose one (?) to focus on. I have several ideas on small projects I'd like to develop this summer, having in mind that this will gain me some experience and, in the best scenario, some cash. But the most important reason I'd like to develop something close to “professional” is to give myself direction on what I want to do as a programmer. One path is that of the Web Programmer. I enjoy PHP and MySQL, as well as HTML and CSS, although I don't really like ASP.NET. I can see myself writing web apps, using the above technologies, as well as XML and Javascript. I also have a neat idea on a Facebook app. The other path is that of the Desktop Programmer. This is a little more complicated cause I really-really enjoy high level languages such as Java and Python but not the low level ones, such as C. I use both Linux and Windows for the last 6 years and I like their latest DEs (meaning Gnome Shell and Metro). I can see myself writing desktop applications for both OSs as long as it means high level programming. Ideally I'd like being able to help the development of GNOME. The last path that interests me is the path of the Smartphone Programmer. I have created some sample applications on Android and due to Java I found it a quite interesting experience. I can also see myself as an independent smartphone developer. These 3 paths seem equally interesting at the moment due to the shallowness of my experience, I guess. I know that I should spend time with all of them and then choose the right one for me but I'd like to know what are the pros and cons in terms of learning curve, fun, job finding and of course financial rewards with each of these paths. I have fair or basic understanding of the languages/technologies I described earlier and this question will help me choose where to focus, at least for now.

  Read the article

• How to be successfull at BDD Specifications Workshops?

  - by sigo

  Today we tried to introduce BDD in our software development process by having a specification workshop. For this workshop we had 2 developers, 1 tester and 1 business analyst. The workshop lasted 1h30 and by the end of it we managed to figure out some BDD scenarios for our new feature. We tried to focus on finding the scenarios that we could miss, and the difficult ones. At the end of the workshop some people were actually unhappy with the workshop. One developer felt he wasted his time as he was used to be given out the scenarios directly by the business analyst and review them with her. The business analyst didn't feel confident with our scenario coverage (Had a feeling that we could have missed out other important stuff) but more importantly felt that this workshop was also a waste of time as she could have figured out all these scenarios by herself and in a shorter period of time. So my question is how that kind of workshop can actually work. In the theory, given you have a new feature to develop, you put the tree 'amigos' (dev/tester/ba) in the same room so that they can collaborate together on writing the differents requirements for the new feature using examples. I can see all the benefits from that. Specially in term of knowledge sharing and common product/end goal/done vision. But in practice, we still think it is more cost effective to first have a BA to work on his own on the examples and only then to have the scenarios to be reviewed/reworked by the 3 'amigos'. By having the BA to work on his own, we actually feel more confident that we are less going to miss out stuff + we still get to review the scenarios afterward to double check. We don't think than simple brainstorming/deliberate discovery is actually enought to seriously cover all the requirement for a feature. The business analyst is actually the best person for that kind of stuff. The thing we just do is to review what she wrote and see if then we have a common understanding (which could then lead to rewrite some of her scenarios or add new ones she could have missed). This workshop lasted 1h30, and by the end of it, we didn't feel confident enought about wha we did...sure we could have spent more time on it but honestly most people get exhausted after 1h30 of brainstorming. So how can you get that to work effectively in practice ?

  Read the article

• Sampling SQL server batch activity

  - by extended_events

  Recently I was troubleshooting a performance issue on an internal tracking workload and needed to collect some very low level events over a period of 3-4 hours.  During analysis of the data I found that a common pattern I was using was to find a batch with a duration that was longer than average and follow all the events it produced.  This pattern got me thinking that I was discarding a substantial amount of event data that had been collected, and that it would be great to be able to reduce the collection overhead on the server if I could still get all activity from some batches. In the past I’ve used a sampling technique based on the counter predicate to build a baseline of overall activity (see Mikes post here).  This isn’t exactly what I want though as there would certainly be events from a particular batch that wouldn’t pass the predicate.  What I need is a way to identify streams of work and select say one in ten of them to watch, and sql server provides just such a mechanism: session_id.  Session_id is a server assigned integer that is bound to a connection at login and lasts until logout.  So by combining the session_id predicate source and the divides_by_uint64 predicate comparator we can limit collection, and still get all the events in batches for investigation. CREATE EVENT SESSION session_10_percent ON SERVER ADD EVENT sqlserver.sql_statement_starting(     WHERE (package0.divides_by_uint64(sqlserver.session_id,10))), ADD EVENT sqlos.wait_info (        WHERE (package0.divides_by_uint64(sqlserver.session_id,10))), ADD EVENT sqlos.wait_info_external (        WHERE (package0.divides_by_uint64(sqlserver.session_id,10))), ADD EVENT sqlserver.sql_statement_completed(     WHERE (package0.divides_by_uint64(sqlserver.session_id,10))) ADD TARGET ring_buffer WITH (MAX_DISPATCH_LATENCY=30 SECONDS,TRACK_CAUSALITY=ON) GO   There we go; event collection is reduced while still providing enough information to find the root of the problem.  By the way the performance issue turned out to be an IO issue, and the session definition above was more than enough to show long waits on PAGEIOLATCH*.        

  Read the article

• Response: Agile's Second Chasm

  - by Malcolm Anderson

  William Pietri over at Agile Focus has written an interesting article entitled, "Agile’s Second Chasm (and how we fell in)" in which he talks about how agile development has fallen into a common trap where large companies are now spending a lot of money hiring agile (Scrum) consultants just so that they can say they are agile, but all the while avoiding any change that is required by Scrum.   It echoes the questions that I've been asking for a while, "Can a fortune 500 company actually do agile development?"  I'm starting to think that the answer is "usually not"   William ask 3 questions at the end of his article that I will answer here.   1) Have I seen agile development brought in and then preemptively customized (read: made into ScrummerFall)?   Yes, Scrum is hard and disruptive.  It's a spotlight on company dysfunction.  In a low trust environment like most fortune 500 companies Scrum will be subverted by anyone who has ever seen "transparency" translate into someone being laid off.   2) If I had to do it all over again, would I change anything?  No, this is a natural progression, but the agile principles are powerful enough, that the companies that don't adopt them will no longer be competitive and will start to fail.   3) Is this situation solvable?  I think it is.  I think that one of the issues is that you often see companies implementing Scrum, but avoiding the agile engineering practices.  I believe that you cannot do one without the other.  Scrum keeps the ship sailing in smooth deep waters.  The agile engineering practices keep the engine running smoothly and cleanly.  If you implement agile engineering practices without Scrum, you run the risk of ending up with a great running piece of software that is useful to no one.  On the other hand, implementing cargo-cult Scrum without the agile engineering practices and you end up (especially in a fortune 500 company) being steered in the right direction, but with your development practices coming to a dead halt because you have code that can not keep up with the changes in requirements.   If you are trying to do Scrum, make sure that you hire some agile engineering coaches, or else you may find your deveolpment engines grinding to a dead halt in the middle of the open ocean.

  Read the article

• Insanity&ndash;Day 1

  - by D'Arcy Lussier

  Some people do those posts about “Here’s what I’m going to do to change my life”. I don’t really like those. I’m a “don’t tell me what you’re going to do, tell me what you’re doing/have done” type of guy. So while I could say how I’m going to change my life and be healthier and happier and thinner in 60 days, I’m just going to tell you how I’m progressing through the Insanity workout. Insanity is a workout-in-a-box. It’s a collection of DVDs that you work out to. Nothing new here, except that the program is intense. It’s core tenet of the program is intensity – you workout at an elevated heart rate for 3 minutes with a short break in between, as opposed to traditional interval training where you go hard for a short time and recover for a few minutes. The other aspect of it is commitment. There is a timetable to follow – you workout 6 days a week with one rest day. This isn’t meant to be a “pick it up whenever you feel like it” type of program. The videos themselves are kind of…I don’t want to say low quality, but not as polished as I expected. Maybe that’s what they were going for. By that I mean they show shots of cameramen and the production equipment during the workout. Otherwise, it’s the Insanity leader Shawn T. leading a group of pretty fit folks through this gruelling workout. And ultimately, those little production nit-picks are irrelevant compared to the actual workout. Holy crap. I haven’t done an aerobics class in like…ever. And watching the video before my actual workout, I thought “That doesn’t look too hard”. Believe me, it is. No weights, no machines, just various exercises done in circuits and with increasing speed. By the end of the workout, I was drenched. So that was day one. Some stats just so I can track it: I’m 286 lbs at my last weigh-in a week ago or so. Should be interesting to see what 60 days of this does! D

  Read the article

• RPi and Java Embedded GPIO: It all begins with hardware

  - by hinkmond

  So, you want to connect low-level peripherals (like blinky-blinky LEDs) to your Raspberry Pi and use Java Embedded technology to program it, do you? You sick foolish masochist. No, just kidding! That's awesome! You've come to the right place. I'll step you though it. And, as with many embedded projects, it all begins with hardware. So, the first thing to do is to get acquainted with the GPIO header on your RPi board. A "header" just means a thingy with a bunch of pins sticking up from it where you can connect wires. See the the red box outline in the photo. Now, there are many ways to connect to that header outlined by the red box in the photo (which the RPi folks call the P1 header). One way is to use a breakout kit like the one at Adafruit. But, we'll just use jumper wires in this example. So, to connect jumper wires to the header you need a map of where to connect which wire. That's why you need to study the pinout in the photo. That's your map for connecting wires. But, as with many things in life, it's not all that simple. RPi folks have made things a little tricky. There are two revisions of the P1 header pinout. One for older boards (RPi boards made before Sep 2012), which is called Revision 1. And, one for those fancy 512MB boards that were shipped after Sep 2012, which is called Revision 2. So, first make sure which board you have: either you have the Model A or B with 128MB or 256MB built before Sep 2012 and you need to look at the pinout for Rev. 1, or you have the Model B with 512MB and need to look at Rev. 2. That's all you need for now. More to come... Hinkmond

  Read the article

• What is hiberfil.sys and How Do I Delete It?

  - by The Geek

  You’re no doubt reading this article because there’s a gigantic hiberfil.sys file sitting in the root of your drive, and you want to get rid of it to free up some space… but you can’t! Luckily, you actually can delete it, and today we’ll show you how. The more memory you have in your PC, the bigger the file will be. So What is hiberfil.sys Anyway? Windows has two power management modes that you can choose from: one is Sleep Mode, which keeps the PC running in a low power state so you can almost instantly get back to what you were working on. The other is Hibernate mode, which completely writes the memory out to the hard drive, and then powers the PC down entirely, so you can even take the battery out, put it back in, start back up, and be right back where you were. Hibernate mode uses the hiberfil.sys file to store the the current state (memory) of the PC, and since it’s managed by Windows, you can’t delete the file. So if you never use it, and want to disable Hibernate mode, keep reading. Personally I stick with Sleep Mode the vast majority of the time, but I do use Hibernate quite often. Disable Hibernate (and Delete hiberfil.sys) in Windows 7 or Vista You’ll need to open an administrator mode command prompt by right-clicking on the command prompt in the start menu, and then choosing Run as Administrator. Once you’re there, type in the following command: powercfg -h off You should immediately notice that the Hibernate option is gone from the Shut down menu. You’ll also notice that the file is magically gone! For more about dealing with Hibernate like setting how long it takes to head into Hibernate mode, you can check out our article on How to Manage Hibernate Mode in Windows 7. Disabling Hibernate Mode in Windows XP It’s a lot easier in Windows XP to get rid of Hibernate mode… in fact, we’ve already covered it before, but we’ll cover it again. Just head into Control Panel –> Power Options, and then find the Hibernate tab. Uncheck the box, reboot your PC, and then you can delete the hiberfil.sys file. Similar Articles Productive Geek Tips How to Delete a System File in Windows 7 or VistaDisable Delete Confirmation Dialog in Windows 7 or VistaClear IE7 Browsing History From the Command LineHide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaClear the Auto-Complete Email Address Cache in Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >