Search Results

Search found 7007 results on 281 pages for 'third party'.

Page 210/281 | < Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >

• Failed to unmount partitions

  - by msknapp

  I'm trying to install ubuntu from a pen drive. I have windows 7 installed already and want to keep that installation. I have a 3TB drive that has one 2TB partition on it, so the last 1TB is completely unused, which is where I want to install ubuntu. I started ubuntu in "try ubuntu" mode and then opened gparted, and then deleted the unused partition for the last third of my drive, then tried to install ubuntu. During the install, it asked me if I wanted to unmount the drives I already have The installer has detected that the following disks have mounted partitions: /dev/sda, /dev/sdb Do you want the installer to try to unmount the partitions on these disks before continuing? If you leave them mounted, you will not be able to create, delete, or resize partitions on these disks, but you may be able to install to existing partitions there. No, Yes I said no because I don't want to lose my windows 7 installation, nor any of that data. I wonder, if I had said yes above, would I have lost all the data on those drives? Anyways, I hit no and continued. I chose to install ubuntu alongside windows 7, and hit continue. A few minutes passed when this popup appeared: Failed to unmount partitions The installer needs to commit changes to partition tables, but cannot do so because the partitions on the following mount points could not be unmounted: /media/ubuntu/Three\ Terabyte Drive Terabyte\ DriveDrive Please close any applications using these mount points. Would you like the installer to try to unmount these partitions again? Go Back, Continue Why is this not working? What am I supposed to do? ========== Update: I went ahead and said yes, it can unmount those partitions. It finished installing Ubuntu, but now when i start my machine it just takes me to the grub rescue prompt. Seems like it broke something. What can I do now? =============== Results of fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027e14 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 976771071 488282112 7 HPFS/NTFS/exFAT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdc: 16.0 GB, 16008609792 bytes 255 heads, 63 sectors/track, 1946 cylinders, total 31266816 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 * 32 31266815 15633392 c W95 FAT32 (LBA) Disk /dev/sdd: 999.5 GB, 999501594624 bytes 255 heads, 63 sectors/track, 121515 cylinders, total 1952151552 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002ae3f Device Boot Start End Blocks Id System /dev/sdd1 2048 1952151551 976074752 7 HPFS/NTFS/exFAT

  Read the article

• Using Private Extension Galleries in Visual Studio 2012

  - by Jakob Ehn

  Note: The installer and the complete source code is available over at CodePlex at the following location: http://inmetavsgallery.codeplex.com   Extensions and addins are everywhere in the Visual Studio ALM ecosystem! Microsoft releases new cool features in the form of extensions and the list of 3rd party extensions that plug into Visual Studio just keeps growing. One of the nice things about the VSIX extensions is how they are deployed. Microsoft hosts a public Visual Studio Gallery where you can upload extensions and make them available to the rest of the community. Visual Studio checks for updates to the installed extensions when you start Visual Studio, and installing/updating the extensions is fast since it is only a matter of extracting the files within the VSIX package to the local extension folder. But for custom, enterprise-specific extensions, you don’t want to publish them online to the whole world, but you still want an easy way to distribute them to your developers and partners. This is where Private Extension Galleries come into play. In Visual Studio 2012, it is now possible to add custom extensions galleries that can point to any URL, as long as that URL returns the expected content of course (see below).Registering a new gallery in Visual Studio is easy, but there is very little documentation on how to actually host the gallery. Visual Studio galleries uses Atom Feed XML as the protocol for delivering new and updated versions of the extensions. This MSDN page describes how to create a static XML file that returns the information about your extensions. This approach works, but require manual updates of that file every time you want to deploy an update of the extension. Wouldn’t it be nice with a web service that takes care of this for you, that just lets you drop a new version of your VSIX file and have it automatically detect the new version and produce the correct Atom Feed XML? Well search no more, this is exactly what the Inmeta Visual Studio Gallery Service does for you :-) Here you can see that in addition to the standard Online galleries there is an Inmeta Gallery that contains two extensions (our WIX templates and our custom TFS Checkin Policies). These can be installed/updated i the same way as extensions from the public Visual Studio Gallery. Installing the Service Download the installler (Inmeta.VSGalleryService.Install.msi) for the service and run it. The installation is straight forward, just select web site, application pool and (optional) a virtual directory where you want to install the service.   Note: If you want to run it in the web site root, just leave the application name blank Press Next and finish the installer. Open web.config in a text editor and locate the the <applicationSettings> element Edit the following setting values: FeedTitle This is the name that is shown if you browse to the service using a browser. Not used by Visual Studio BaseURI When Visual Studio downloads the extension, it will be given this URI + the name of the extension that you selected. This value should be on the following format: http://SERVER/[VDIR]/gallery/extension/ VSIXAbsolutePath This is the path where you will deploy your extensions. This can be a local folder or a remote share. You just need to make sure that the application pool identity account has read permissions in this folder Save web.config to finish the installation Open a browser and enter the URL to the service. It should show an empty Feed page:   Adding the Private Gallery in Visual Studio 2012 Now you need to add the gallery in Visual Studio. This is very easy and is done as follows: Go to Tools –> Options and select Environment –> Extensions and Updates Press Add to add a new gallery Enter a descriptive name, and add the URL that points to the web site/virtual directory where you installed the service in the previous step   Press OK to save the settings. Deploying an Extension This one is easy: Just drop the file in the designated folder! :-)  If it is a new version of an existing extension, the developers will be notified in the same way as for extensions from the public Visual Studio gallery: I hope that you will find this sever useful, please contact me if you have questions or suggestions for improvements!

  Read the article

• Pinterest and the Rising Power of Imagery

  - by Mike Stiles

  If images keep you glued to a screen, you’re hardly alone. Countless social users are letting their eyes do the walking, waiting for that special photo to grab their attention. And perhaps more than any other social network, Pinterest has been giving those eyes plenty of room to walk. Pinterest came along in 2010. Its play was that users could simply create topic boards and pin pictures to the appropriate boards for sharing. Yes there are some words, captions mostly, but not many. The speed of its growth raised eyebrows. Traffic quadrupled in the last quarter of 2011, with 7.51 million unique visitors in December alone. It now gets 1.9 billion monthly page views. And it was sticky. In the US, the average time a user spends strolling through boards and photos on Pinterest is 15 minutes, 50 seconds. Proving the concept of browsing a catalogue is not dead, it became a top 5 referrer for several apparel retailers like Land’s End, Nordstrom, and Bergdorfs. Now a survey of online shoppers by BizRate Insights says that Pinterest is responsible for more purchases online than Facebook. Over 70% of its users are going there specifically to keep up with trends and get shopping ideas. And when they buy, the average order value is $179. Pinterest is also scoring better in terms of user engagement. 66% of pinners regularly follow and repin retailers, whereas 17% of Facebook fans turn to that platform for purchase ideas. (Facebook still wins when it comes to reach and driving traffic to 3rd-party sites by the way). Social posting best practices have consistently shown that posts with photos are rewarded with higher engagement levels. You may be downright Shakespearean in your writing, but what makes images in the digital world so much more powerful than prose? 1. They transcend language barriers. 2. They’re fun and addictive to look at. 3. They can be consumed in fractions of a second, important considering how fast users move through their social content (admit it, you do too). 4. They’re efficient gateways. A good picture might get them to the headline. A good headline might then get them to the written content. 5. The audience for them surpasses demographic limitations. 6. They can effectively communicate and trigger an emotion. 7. With mobile use soaring, photos are created on those devices and easily consumed and shared on them. Pinterest’s iPad app hit #1 in the Apple store in 1 day. Even as far back as 2009, over 2.5 billion devices with cameras were on the streets generating in just 1 year, 10% of the number of photos taken…ever. But let’s say you’re not a retailer. What if you’re a B2B whose products or services aren’t visual? Should you worry about your presence on Pinterest? As with all things, you need a keen awareness of who your audience is, where they reside online, and what they want to do there. If it doesn’t make sense to put a tent stake in Pinterest, fine. But ignore the power of pictures at your own peril. If not visually, how are you going to attention-grab social users scrolling down their News Feeds at top speed? You’re competing with every other cool image out there from countless content sources. Bore us and we’ll fly right past you.

  Read the article

• SQL Server: Writing CASE expressions properly when NULLs are involved

  - by Mladen Prajdic

  We’ve all written a CASE expression (yes, it’s an expression and not a statement) or two every now and then. But did you know there are actually 2 formats you can write the CASE expression in? This actually bit me when I was trying to add some new functionality to an old stored procedure. In some rare cases the stored procedure just didn’t work correctly. After a quick look it turned out to be a CASE expression problem when dealing with NULLS. In the first format we make simple “equals to” comparisons to a value: SELECT CASE <value> WHEN <equals this value> THEN <return this> WHEN <equals this value> THEN <return this> -- ... more WHEN's here ELSE <return this> END Second format is much more flexible since it allows for complex conditions. USE THIS ONE! SELECT CASE WHEN <value> <compared to> <value> THEN <return this> WHEN <value> <compared to> <value> THEN <return this> -- ... more WHEN's here ELSE <return this> END Now that we know both formats and you know which to use (the second one if that hasn’t been clear enough) here’s an example how the first format WILL make your evaluation logic WRONG. Run the following code for different values of @i. Just comment out any 2 out of 3 “SELECT @i =” statements. DECLARE @i INTSELECT  @i = -1 -- first resultSELECT  @i = 55 -- second resultSELECT  @i = NULL -- third resultSELECT @i AS OriginalValue, -- first CASE format. DON'T USE THIS! CASE @i WHEN -1 THEN '-1' WHEN NULL THEN 'We have a NULL!' ELSE 'We landed in ELSE' END AS DontUseThisCaseFormatValue, -- second CASE format. USE THIS! CASE WHEN @i = -1 THEN '-1' WHEN @i IS NULL THEN 'We have a NULL!' ELSE 'We landed in ELSE' END AS UseThisCaseFormatValue When the value of @i is –1 everything works as expected, since both formats go into the –1 WHEN branch. When the value of @i is 55 everything again works as expected, since both formats go into the ELSE branch. When the value of @i is NULL the problems become evident. The first format doesn’t go into the WHEN NULL branch because it makes an equality comparison between two NULLs. Because a NULL is an unknown value: NULL = NULL is false. That is why the first format goes into the ELSE Branch but the second format correctly handles the proper IS NULL comparison.   Please use the second more explicit format. Your future self will be very grateful to you when he doesn’t have to discover these kinds of bugs.

  Read the article

• No access to Samba shares

  - by koanhead

  I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

  Read the article

• Upgrade to Xubuntu 13.10 - Saucy Salamander

  As a common 'fashion' it is possible to upgrade an existing installation of Ubuntu or one of its derivates every six months. Of course, you might opt-in for the adventure and directly keep your system always on the latest version (including alphas and betas), or you might like to play safe and stay on the long-term support (LTS) versions which are updated every two years only. As for me, I'd like to jump from release to release on my main desktop machine. And since 17th October Saucy Salamander or also known as Ubuntu 13.10 has been released for general use. The following paragraphs document the steps I went in order to upgrade my system to the recent version. Don't worry about the fact that I'm actually using Xubuntu. It's mainly a flavoured version of Ubuntu running Xfce 4.10 as default X Window manager. Well, I have Gnome and LXDE on the same system... just out of couriosity. Preparing the system Before you think about upgrading you have to ensure that your current system is running on the latest packages. This can be done easily via a terminal like so: $ sudo apt-get update && sudo apt-get -y dist-upgrade --fix-missing Next, we are going to initiate the upgrade itself: $ sudo update-manager As a result the graphical Software Updater should inform you that a newer version of Ubuntu is available for installation. Ubuntu's Software Updater informs you whether an upgrade is available Running the upgrade After clicking 'Upgrade...' you will be presented with information about the new version. Details about Ubuntu 13.10 (Saucy Salamander) Simply continue with the procedure and your system will be analysed for the next steps. Analysing the existing system and preparing the actual upgrade to 13.10 Next, we are at the point of no return. Last confirmation dialog before having a coffee break while your machine is occupied to download the necessary packages. Not the best bandwidth at hand after all... yours might be faster. Are you really sure that you want to start the upgrade? Let's go and have fun! Anyway, bye bye Raring Ringtail and Welcome Saucy Salamander! In case that you added any additional repositories like Medibuntu or PPAs you will be informed that they are going to be disabled during the upgrade and they might require some manual intervention after completion. Ubuntu is playing safe and third party repositories are disabled during the upgrade Well, depending on your internet bandwidth this might take something between a couple of minutes and some hours to download all the packages and then trigger the actual installation process. In my case I left my PC unattended during the night. Time to reboot Finally, it's time to restart your system and see what's going to happen... In my case absolutely nothing unexpected. The system booted the new kernel 3.11.0 as usual and I was greeted by a new login screen. Honestly, 'same' system as before - which is good and I love that fact of consistency - and I can continue to work productively. And also Software Updater confirms that we just had a painless upgrade: System is running Ubuntu 13.10 - Saucy Salamander - and up to date See you in six months again... ;-) Post-scriptum In case that you would to upgrade to the latest development version of Ubuntu, run the following command in a console: $ sudo update-manager -d And repeat all steps as described above.

  Read the article

• Multichannel Digital Engagement: Find Out How Your Organization Measures Up

  - by Michael Snow

  This article was originally published in the September 2013 Edition of the Oracle Information InDepth Newsletter ORACLE WEBCENTER EDITION Thanks to mobile and social technologies, interactive online experiences are now commonplace. Not only that, they give consumers more choices, influence, and control than ever before. So how can you make your organization stand out? The key building blocks for delivering exceptional cross-channel digital experiences are outlined below. Also, a new assessment tool is available to help you measure your organization's ability to deliver such experiences. A clearly defined digital strategy. The customer journey is growing increasingly complex, encompassing multiple touchpoints and channels. It used to be easy to map marketing efforts to specific offline channels; for example, a direct mail piece with an offer to visit a store for a discounted purchase. Now it is more difficult to cultivate and track such clear cause-and-effect relationships. To deliver an integrated digital experience in this more complex world, organizations need a clearly defined and comprehensive digital marketing strategy that is backed up by an integrated set of software, middleware, and hardware solutions. Strong support for business agility and speed-to-market. As both IT and marketing executives know, speed-to-market and business agility are key to competitive advantage. That means marketers need solutions to support the rapid implementation of online marketing initiatives—plus the flexibility to adapt quickly to a changing marketplace. And IT needs tools with the performance, scalability, and ease of integration to support marketing efforts. Both teams benefit when business users are empowered to implement marketing initiatives on their own, with minimal IT intervention. The ability to deliver relevant, personalized content. Delivering a one-size-fits-all online customer experience is no longer acceptable. Customers expect you to know who they are, including their preferences and past relationship with your brand. That means delivering the most relevant content from the moment a visitor enters your site. To make that happen, you need a powerful rules engine so that marketers and business users can easily define site visitor segments and deliver content accordingly. That includes both implicit targeting that is based on the user’s behavior, and explicit targeting that takes a user’s profile information into account. Ideally, the rules engine can also intelligently weight recommendations when multiple segments apply to a specific customer. Support for social interactivity. With the advent of Facebook and LinkedIn, visitors expect to participate in and contribute to your web presence—and share their experience on their own social networks. That requires easy incorporation of user-generated content such as comments, ratings, reviews, polls, and blogs; seamless integration with third-party social networking sites; and support for social login, which helps to remove barriers to social participation. The ability to deliver connected, multichannel experiences that include powerful, flexible mobile capabilities. By 2015, mobile usage is projected to surpass that of PCs and other wired devices. In other words, mobile is an essential element in delivering exceptional online customer experiences. This requires the creation and management of mobile experiences that are optimized for delivery to the thousands of different devices that are in use today. Just as important, organizations must be able to easily extend their traditional web presence to the mobile channel and deliver highly personalized and relevant multichannel marketing initiatives while also managing to minimize the time and effort required to manage mobile sites. Are you curious to know how your organization measures up when it comes to delivering an engaging, multichannel digital experience? If so, take this brief, 15-question online assessment and see how your organization scores in the areas of digital strategy, digital agility, relevance and personalization, social interactivity, and multichannel experience.

  Read the article

• No access to Samba shares

  - by koanhead

  I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

  Read the article

• How do you go from a so so programmer to a great one? [closed]

  - by Cervo

  How do you go from being an okay programmer to being able to write maintainable clean code? For example David Hansson was writing Basecamp when in the process he created Rails as part of writing Basecamp in a clean/maintainable way. But how do you know when there is value in a side project like that? I have a bachelors in computer science, and I am about to get a masters and I will say that colleges teach you to write code to solve problems, not neatly or anything. Basically you think of a problem, come up with a solution, and write it down...not necessarily the most maintainable way in the world. Also my first job was in a startup, and now my third is in a small team in a large company where the attitude was/is get it done yesterday (also most of my jobs are mainly database development with SQL with a few ASP.NET web pages/.NET apps on the side). So of course cut/paste is more favored than making things more cleanly. And they would rather have something yesterday even if you have to rewrite it next month rather than to have something in a week that lasts for a year. Also spaghetti code turns up all over the place, and it takes very smart people to write/understand/maintain spaghetti code...However it would be better to do things so simple/clean that even a caveman/woman could do maintenance. Also I get very bored/unmotivated having to go modify the same things cut/pasted in a few locations. Is this the type of skill that you need to learn by working with a serious software organization that has an emphasis on maintenance and maybe even an architect who designs a system architecture and reviews code? Could you really learn it by volunteering on an open source project (it seems to me that a full time programmer job is way more practice than a few hours a week on an open source project)? Is there some course where you can learn this? I can attest that graduate school and undergraduate school do not really emphasize clean software at all. They just teach the structures/algorithms and then send you off into the world to solve problems. Overall I think the first thing is learning to write clean/maintainable code within the bounds of the project in order to become a good programmer. Then the next thing is learning when you need to do a side project (like a framework) to make things more maintainable/clean even while you still deliver things for the deadline in order to become a great programmer. For example, you are making an SQL report and someone gives you 100 calculations for individual columns. At what point does it make sense to construct a domain specific language to encode the rules in simply and then generate all the SQL as opposed to cut/pasting the query from the table a bunch of times and then adjusting each query to do the appropriate calculations. This is the type of thing I would say a great programmer would know. He/she would maybe even know ways to avoid the domain specific language and to still do all the calculations without creating an unmaintainable mess or a ton of repetitive code to cut/paste everywhere.

  Read the article

• Create Custom Speech Bubbles in Silverlight.

  - by mbcrump

  I had a reader email me the following question: “How do you create Speech Bubbles in Silverlight/WPF without adding any extra .dlls? Right off the bat, I know at least two ways to create the speech bubbles that look just like the ones in comic books. Using the Callout Shapes included with Blend 4. Using the free 3rd party control named FreeBubbles (I used this before Blend 4). Unfortunately, we cannot use either of these as they will both add extra .dll’s to the project. So why wouldn’t you want to use one of those? I can think of a few reasons: You do not want to increase the size of your .XAP by including extra .dll’s. You do not have Expression Blend or the license to the use the .dll’s. You want a custom Speech Bubble that is not included in the four “Callout” Controls with Blend. Instead of using one of these methods, we will create a Speech Bubble in Blend 4 using Path element and a TextBlock. Before we get started, lets look at the Callout Shapes included with Blend 4. Using Blend 4 you can simply drag/drop these controls onto your Silverlight application and you are ready to go. We can create all of these Speech Bubbles and even some of the modern bubbles used in recent comic books. Lets get started. Start up Expression Blend 4 and select the Pen Tool. On the Art Board, start connecting the dots like I did below. You can add a color if you wish. …keep going …complete Let’s go ahead and add some text to the Speech Bubble. Drag a TextBlock from the Panel and put it directly inside the Speech Bubble. Go ahead and set the TextAlignment to Center for the TextBlock. and give it some text. At this point, you could go ahead and create a user control if you want to reuse the Speech Bubble you created. Select both the Path and the TextBlock by clicking then while holding down CTRL and then Right Click them. Select Make Into User Control. Give it a name and then Build your project. Lets create another one using the Ellipse for the older comic book style of Speech Bubbles. Drag an Ellipse to the Artboard and give it a color. Now, grab the Pen and drag a triangle like I did below. Simply drag it over a corner of the Ellipse. Select Combine then Unite and you will have a Path. At this point, you can go ahead and add a TextBlock like we did earlier. Lets go ahead and create a rounded rectangle one by adding a Rectangle to the Artboard. Go ahead and set the RadiuX and RadiusY to 25 to give it rounded edges. Let’s create another path and drag it right on top of our rounded rectangle like we did earlier. …looking good Select Combine then Unite and you will have a Path. At this point, you can go ahead and add a TextBlock like we did earlier. So let’s look at what we’ve created today using the path element and TextBlock. As you can tell, it required more work but meets the requirements. This was actually fun to do and I encourage anyone that visits my blog to send in request like this.  Subscribe to my feed

  Read the article

• Is there any kind of established architecture for browser based games?

  - by black_puppydog

  I am beginning the development of a broser based game in which players take certain actions at any point in time. Big parts of gameplay will be happening in real life and just have to be entered into the system. I believe a good kind of comparison might be a platform for managing fantasy football, although I have virtually no experience playing that, so please correct me if I am mistaken here. The point is that some events happen in the program (i.e. on the server, out of reach for the players) like pulling new results from some datasource, starting of a new round by a game master and such. Other events happen in real life (two players closing a deal on the transfer of some team member or whatnot - again: have never played fantasy football) and have to be entered into the system. The first part is pretty easy since the game masters will be "staff" and thus can be trusted to a certain degree to not mess with the system. But the second part bothers me quite a lot, especially since the actions may involve multiple steps and interactions with different players, like registering a deal with the system that then has to be approved by the other party or denied and passed on to a game master to decide. I would of course like to separate the game logic as far as possible from the presentation and basic form validation but am unsure how to do this in a clean fashion. Of course I could (and will) put some effort into making my own architectural decisions and prototype different ideas. But I am bound to make some stupid mistakes at some point, so I would like to avoid some of that by getting a little "book smart" beforehand. So the question is: Is there any kind of architectural works that I can read up on? Papers, blogs, maybe design documents or even source code? Writing this down this seems more like a business application with business rules, workflows and such... Any good entry points for that? EDIT: After reading the first answers I am under the impression of having made a mistake when including the "MMO" part into the title. The game will not be all fancy (i.e. 3D or such) on the client side and the logic will completely exist on the server. That is, apart from basic form validation for the user which will also be mirrored on the server side. So the target toolset will be HTML5, JavaScript, probably JQuery(UI). My question is more related to the software architecture/design of a system that enforces certain rules. Separation of ruleset and presentation One problem I am having is that I want to separate the game rules from the presentation. The first step would be to make an own module for the game "engine" that only exposes an interface that allows all actions to be taken in a clean way. If an action fails with regard to some pre/post condition, the engine throws an exception which is then presented to the user like "you cannot sell something you do not own" or "after that you would end up in a situation which is not a valid game state." The problem here is that I would like to be able to not even present invalid action in the first place or grey out the corresponding UI elements. Changing and tweaking the ruleset Another big thing is the ruleset. It will probably evolve over time and most definitely must be tweaked. What's more, it should be possible (to a certain extent) to build a ruleset that fits a specific game round, i.e. choosing different kinds of behaviours in different aspects of the game. This would do something like "we play it with extension A today but we throw out extension B." For me, this screams "Architectural/Design pattern" but I have no idea on who might have published on something like this, not even what to google for.

  Read the article

• Webcast On-Demand: Building Java EE Apps That Scale

  - by jeckels

  With some awesome work by one of our architects, Randy Stafford, we recently completed a webcast on scaling Java EE apps efficiently. Did you miss it? No problem. We have a replay available on-demand for you. Just hit the '+' sign drop-down for access.Topics include: Domain object caching Service response caching Session state caching JSR-107 HotCache and more! Further, we had several interesting questions asked by our audience, and we thought we'd share a sampling of those here for you - just in case you had the same queries yourself. Enjoy! What is the largest Coherence deployment out there? We have seen deployments with over 500 JVMs in the Coherence cluster, and deployments with over 1000 JVMs using the Coherence jar file, in one system. On the management side there is an ecosystem of monitoring tools from Oracle and third parties with dashboards graphing values from Coherence's JMX instrumentation. For lifecycle management we have seen a lot of custom scripting over the years, but we've also integrated closely with WebLogic to leverage its management ecosystem for deploying Coherence-based applications and managing process life cycles. That integration introduces a new Java EE archive type, the Grid Archive or GAR, which embeds in an EAR and can be seen by a WAR in WebLogic. That integration also doesn't require any extra WebLogic licensing if Coherence is licensed. How is Coherence different from a NoSQL Database like MongoDB? Coherence can be considered a NoSQL technology. It pre-dates the NoSQL movement, having been first released in 2001 whereas the term "NoSQL" was coined in 2009. Coherence has a key-value data model primarily but can also be used for document data models. Coherence manages data in memory currently, though disk persistence is in a future release currently in beta testing. Where the data is managed yields a few differences from the most well-known NoSQL products: access latency is faster with Coherence, though well-known NoSQL databases can manage more data. Coherence also has features that well-known NoSQL database lack, such as grid computing, eventing, and data source integration. Finally Coherence has had 15 years of maturation and hardening from usage in mission-critical systems across a variety of industries, particularly financial services. Can I use Coherence for local caching? Yes, you get additional features beyond just a java.util.Map: you get expiration capabilities, size-limitation capabilities, eventing capabilites, etc. Are there APIs available for GoldenGate HotCache? It's mostly a black box. You configure it, and it just puts objects into your caches. However you can treat it as a glass box, and use Coherence event interceptors to enhance its behavior - and there are use cases for that. Are Coherence caches updated transactionally? Coherence provides several mechanisms for concurrency control. If a project insists on full-blown JTA / XA distributed transactions, Coherence caches can participate as resources. But nobody does that because it's a performance and scalability anti-pattern. At finer granularity, Coherence guarantees strict ordering of all operations (reads and writes) against a single cache key if the operations are done using Coherence's "EntryProcessor" feature. And Coherence has a unique feature called "partition-level transactions" which guarantees atomic writes of multiple cache entries (even in different caches) without requiring JTA / XA distributed transaction semantics.

  Read the article

• Reading graph inputs for a programming puzzle and then solving it

  - by Vrashabh

  I just took a programming competition question and I absolutely bombed it. I had trouble right at the beginning itself from reading the input set. The question was basically a variant of this puzzle http://codercharts.com/puzzle/evacuation-plan but also had an hour component in the first line(say 3 hours after start of evacuation). It reads like this This puzzle is a tribute to all the people who suffered from the earthquake in Japan. The goal of this puzzle is, given a network of road and locations, to determine the maximum number of people that can be evacuated. The people must be evacuated from evacuation points to rescue points. The list of road and the number of people they can carry per hour is provided. Input Specifications Your program must accept one and only one command line argument: the input file. The input file is formatted as follows: the first line contains 4 integers n r s t n is the number of locations (each location is given by a number from 0 to n-1) r is the number of roads s is the number of locations to be evacuated from (evacuation points) t is the number of locations where people must be evacuated to (rescue points) the second line contains s integers giving the locations of the evacuation points the third line contains t integers giving the locations of the rescue points the r following lines contain to the road definitions. Each road is defined by 3 integers l1 l2 width where l1 and l2 are the locations connected by the road (roads are one-way) and width is the number of people per hour that can fit on the road Now look at the sample input set 5 5 1 2 3 0 3 4 0 1 10 0 2 5 1 2 4 1 3 5 2 4 10 The 3 in the first line is the additional component and is defined as the number of hours since the resuce has started which is 3 in this case. Now my solution was to use Dijisktras algorithm to find the shortest path between each of the rescue and evac nodes. Now my problem started with how to read the input set. I read the first line in python and stored the values in variables. But then I did not know how to store the values of the distance between the nodes and what DS to use and how to input it to say a standard implementation of dijikstras algorithm. So my question is two fold 1.) How do I take the input of such problems? - I have faced this problem in quite a few competitions recently and I hope I can get a simple code snippet or an explanation in java or python to read the data input set in such a way that I can input it as a graph to graph algorithms like dijikstra and floyd/warshall. Also a solution to the above problem would also help. 2.) How to solve this puzzle? My algorithm was: Find shortest path between evac points (in the above example it is 14 from 0 to 3) Multiply it by number of hours to get maximal number of saves Also the answer given for the variant for the input set was 24 which I dont understand. Can someone explain that also. UPDATE: I get how the answer is 14 in the given problem link - it seems to be just the shortest path between node 0 and 3. But with the 3 hour component how is the answer 24 UPDATE I get how it is 24 - its a complete graph traversal at every hour and this is how I solve it Hour 1 Node 0 to Node 1 - 10 people Node 0 to Node 2- 5 people TotalRescueCount=0 Node 1=10 Node 2= 5 Hour 2 Node 1 to Node 3 = 5(Rescued) Node 2 to Node 4 = 5(Rescued) Node 0 to Node 1 = 10 Node 0 to Node 2 = 5 Node 1 to Node 2 = 4 TotalRescueCount = 10 Node 1 = 10 Node 2= 5+4 = 9 Hour 3 Node 1 to Node 3 = 5(Rescued) Node 2 to Node 4 = 5+4 = 9(Rescued) TotalRescueCount = 9+5+10 = 24 It hard enough for this case , for multiple evac and rescue points how in the world would I write a pgm for this ?

  Read the article

• Missing styles. Is the correct theme chosen for this layout?

  - by user1820007

  Missing styles. Is the correct theme chosen for this layout? Use the Theme combo box above the layout to choose a different layout, or fix the theme style references. Failed to find style 'mapViewStyle' in current theme. I tried every solutions available to solve this problem. But nothing seems to work. I have included library in the manifest file. I even created style is styles.xml. I have chosen Google Apis build target as well. Can somebody please give me a solution. Thank you in advance for your valuable time... here is my xml file: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" style="@style/AppTheme" android:layout_width="fill_parent" android:layout_height="fill_parent" > <com.google.android.maps.MapView android:id="@+id/themap" style="@style/mapViewStyle" android:layout_width="fill_parent" android:layout_height="fill_parent" android:apiKey="here i have my key" android:clickable="true" android:enabled="true" /> </RelativeLayout> ` Here is my manifest snippet: <uses-library android:name="com.google.android.maps" /> <activity android:name=".MainActivity" android:label="@string/title_activity_main" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".Second" /> <acttiviy android:name=".Third" android:theme="@android:style/Theme.Black" /> </application> here is my style.xml file <style name="mapViewStyle" parent="@android:style/Theme.Black"> </style> </resources>

  Read the article

• What is a good alternative to the WPF WebBrowser Control?

  - by VoidDweller

  I have an MDI WPF app that I need to add web content to. At first, great it looks like I have 2 options built into the framework the Frame control and the WebBrowser control. Given that this is an MDI app it doesn't take long to discover that neither of these will work. The WPF WebBrowser control wraps up the IE WebBrowser ActiveX Control which uses the Win32 graphics pipeline. The "Airspace" issue pretty much sums this up as "Sorry, the layouts will not play nice together". Yes, I have thought about taking snapshots of the web content rendering these and mapping the mouse and keyboard events back to the browser control, but I can't afford the performance penalty and I really don't have time to write and thoroughly test it. I have looked for third party controls, but so far I have only found Chris Cavanagh's WPF Chromium Web Browser control. Which wraps up Awesomium 1.5. Together these are very cool, they play nice with the WPF layouts. But they do not meet my performance requirements. They are VERY HEAVY on memory consumption and not to friendly with CPU usage either. Not to mention still quite buggy. I'll elaborate if you are interested. So, do any of you know of a stable performant WPF web browser control? Thanks.

  Read the article

• JQuery Json error: Object doesn't support this property or method

  - by Abu Hamzah

  ERROR: Microsoft JScript runtime error: Object doesn't support this property or method i am using WCF service to pull the data and its very simple for the purpose of test and it does returning me the data from wcf service but it fails on json2.js on line number 314-316 // We split the first stage into 4 regexp operations in order to work around // crippling inefficiencies in IE's and Safari's regexp engines. First we // replace all backslash pairs with '@' (a non-JSON character). Second, we // replace all simple value tokens with ']' characters. Third, we delete all // open brackets that follow a colon or comma or that begin the text. Finally, // we look to see that the remaining characters are only whitespace or ']' or // ',' or ':' or '{' or '}'. If that is so, then the text is safe for eval. if (/^[\],:{}\s]*$/.test(text.replace(/\\["\\\/bfnrtu]/g, '@'). replace(/"[^"\\\n\r]*"|true|false|null|-?\d+(?:\.\d*)?(?:[eE][+\-]?\d+)?/g, ']'). replace(/(?:^|:|,)(?:\s*\[)+/g, ''))) { here is what i am doing function serviceProxy(wjOrderServiceURL) { var _I = this; this.ServiceURL = wjOrderServiceURL; // *** Call a wrapped object this.invoke = function (options) { // Default settings var settings = { serviceMethod: '', data: null, callback: null, error: null, type: "POST", processData: false, contentType: "application/json", dataType: "text", bare: false }; if (options) { $.extend(settings, options); } function GetFederalHolidays() { $("#dContacts1").empty().html('Searching for Active Contacts...'); ContactServiceProxy.invoke({ serviceMethod: "Holidays", callback: function (response) { // ProcessActiveContacts1(response); debugger }, error: function (xhr, errorMsg, thrown) { postErrorAndUnBlockUI(xhr, errorMsg, thrown); } }); } any help what iam doing wrong? i try to change from dataType: text to json but i get the same error above.

  Read the article

• Solving Diophantine Equations Using Python

  - by HARSHITH

  In mathematics, a Diophantine equation (named for Diophantus of Alexandria, a third century Greek mathematician) is a polynomial equation where the variables can only take on integer values. Although you may not realize it, you have seen Diophantine equations before: one of the most famous Diophantine equations is: We are not certain that McDonald's knows about Diophantine equations (actually we doubt that they do), but they use them! McDonald's sells Chicken McNuggets in packages of 6, 9 or 20 McNuggets. Thus, it is possible, for example, to buy exactly 15 McNuggets (with one package of 6 and a second package of 9), but it is not possible to buy exactly 16 nuggets, since no non- negative integer combination of 6's, 9's and 20's adds up to 16. To determine if it is possible to buy exactly n McNuggets, one has to solve a Diophantine equation: find non-negative integer values of a, b, and c, such that 6a + 9b + 20c = n. Write an iterative program that finds the largest number of McNuggets that cannot be bought in exact quantity. Your program should print the answer in the following format (where the correct number is provided in place of n): "Largest number of McNuggets that cannot be bought in exact quantity: n"

  Read the article

• System.Net.WebClient doesn't work with Windows Authentication

  - by Peter Hahndorf

  I am trying to use System.Net.WebClient in a WinForms application to upload a file to an IIS6 server which has Windows Authentication as it only 'Authentication' method. WebClient myWebClient = new WebClient(); myWebClient.Credentials = new System.Net.NetworkCredential(@"boxname\peter", "mypassword"); byte[] responseArray = myWebClient.UploadFile("http://localhost/upload.aspx", fileName); I get a 'The remote server returned an error: (401) Unauthorized', actually it is a 401.2 Both client and IIS are on the same Windows Server 2003 Dev machine. When I try to open the page in Firefox and enter the same correct credentials as in the code, the page comes up. However when using IE8, I get the same 401.2 error. Tried Chrome and Opera and they both work. I have 'Enable Integrated Windows Authentication' enabled in the IE Internet options. The Security Event Log has a Failure Audit: Logon Failure: Reason: An error occurred during logon User Name: peter Domain: boxname Logon Type: 3 Logon Process: ÈùÄ Authentication Package: NTLM Workstation Name: boxname Status code: 0xC000006D Substatus code: 0x0 Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 127.0.0.1 Source Port: 1476 I used Process Monitor and Fiddler to investigate but to no avail. Why would this work for 3rd party browsers but not with IE or System.Net.WebClient?

  Read the article

• TFS Build errors TF224003, TF215085, TF215076

  - by iamdudley

  Hi, I am using TFS2008 and VS2008. I run nightly builds for about 20 applications using one build agent and the builds are scheduled for either 1am or 2am. Most of the build succeed, however 6 of them fail regularly with similar errors. The errors are either the first two below, or the third one by itself: TF215085: An error occurred while connecting to agent \xxxx\BUILDMACHINE: TF215076: Team Foundation Build on computer BUILDMACHINE (port 9191) is not responding. (Detail Message: The request was aborted: The operation has timed out.) 11/04/2010 2:10:10 AM TF224003: An exception occurred on the build computer BUILDMACHINE: The build (vstfs:///Build/Build/2632) has already completed and cannot be started again.. TF215085: An error occurred while connecting to agent \yyyyy\BA_WKSTFSBUILD: Team Foundation services are not available from server srvtfs. Technical information (for administrator): The operation has timed out It looks to me like some kind of communication error, maybe the port gets over loaded - can this happen? Should I spread the builds out a bit more? In the build definition it says "Queue the build on the default build agent at", so I figured if I scheduled them to start at the same time they would be queued and occur sequentially. Most of the suggestions I've found online for these errors are for all or nothing scenarios where no builds work at all whereas my problem is most build but some consistently do not. Judging by the dates of the last successful builds of these 6 failing builds I believe it is the same 6 failing every night. (I'm editing the build definitions now to keep the failed builds so I can get some more info on the problem) Any help on this would be much appreciated. James.

  Read the article

• Managing Dependency Hell with WiX and C#

  - by Tom the Junglist

  We are on the eve of product launch, and at the last minute I am being bombarded with crash reports that appear to be related to our installer, which is a WiX3 project with separate outputs for x86 and x64 builds. These have been an ongoing problem that I always thought were fixed, only to find out that they were still lurking. The product itself is a collection of binaries that communicate with each other via .Net remoting, including a Windows Service and a small COM component that is loaded as an addon in another app. The service runs as SYSTEM, the COM piece runs in a low-rights context, while the other pieces run in normal user contexts. Other pieces include an third-party COM object library DLL and a shared DLL with the .net Remoting interfaces. I've observed flat-out weird behavior with MSI, particularly on version upgrades. Between MS' anal strong-name implementation (specifically, the exact version check before loading a given assembly), a documented WiX/MSI bug that sees critical files erased on upgrades (essentially, if a file in the upgrade MSI has the same version number as the existing install, that file is deleted), and having to work around Wow64 virtualization (x86 MSI can only write to registry/HD locations via Wow64, yet x64 MSIs cannot run on x86 computers...), I am about ready to trash the whole thing and port it over to a different install system. What I am looking for on tips + tricks, techniques, or suggestions on how to properly do things so that I am not fighting with Windows Installer's twisted sense of logic. I am tired of fighting with WiX/MSI/Windows Installer. All it needs to do is place files and registry keys where I tell it to, upgrade them when appropriate, and don't delete anything until the user uninstalls. Instead, dependencies are deleted willy-nilly, bringing up a whole bunch of uncatchable exceptions (can't wrap a try{} block around function declarations) and GPF'ing the whole app. I am particularly interested in 'best practices' and examples regarding shared and dependency DLLs, and any tips on making sure if a file needs to go to GAC, that it actually goes to the GAC and stays there until it is appropriate to remove it. Thanks! Tom

  Read the article

• PyQt4 and QTableView with spinbox and checkbox

  - by ekapek

  Hi, I have a QTableView with QSqlTableModel and with 3 columns, now I need to have: - second column: spinbox after clicked to edit - third column: checkbox (displayed center) My code: class SpinBoxDelegate(QtGui.QItemDelegate): def createEditor(self, parent, option, index): editor = QtGui.QSpinBox(parent) editor.setMinimum(0) editor.setMaximum(100) print 'spinbox' return editor def setEditorData(self, spinBox, index): value = index.model().data(index, QtCore.Qt.EditRole).toInt()[0] spinBox.setValue(value) def setModelData(self, spinBox, model, index): spinBox.interpretText() value = spinBox.value() model.setData(index, value, QtCore.Qt.EditRole) def updateEditorGeometry(self, editor, option, index): editor.setGeometry(option.rect) class myQSqlTableModel(QtSql.QSqlTableModel): def flags(self,index): result = QtSql.QSqlTableModel.flags(self,index); if index.column() == 2: result |= QtCore.Qt.ItemIsUserCheckable return result def data(self,index,role): if not index.isValid: return QtCore.QVariant() value = QtSql.QSqlTableModel.data(self, index, role) if index.column() == 2: if role == QtCore.Qt.CheckStateRole: return QtCore.Qt.Unchecked if QtSql.QSqlTableModel.data(self, index).toInt()[0] else QtCore.Qt.Checked elif role == QtCore.Qt.DisplayRole: return QtCore.QVariant() return value and self.model = myQSqlTableModel(self) self.model.setTable("person") self.model.setEditStrategy(QtSql.QSqlTableModel.OnManualSubmit) self.model.select(): self.model.setHeaderData(0, QtCore.Qt.Horizontal, self.tr("ID")) self.model.setHeaderData(1, QtCore.Qt.Horizontal, self.tr("A")) self.model.setHeaderData(2, QtCore.Qt.Horizontal, self.tr("B")) self.view = QtGui.QTableView() self.view.setModel(self.model) self.view.setSortingEnabled(True) spinDelegate = SpinBoxDelegate() self.view.setItemDelegateForColumn(1,spinDelegate) but it does't work: spinbox don't show after click and checkbox can't be clicked and is aligned to left Any help?

  Read the article

• .NET "must-have" development tools

  - by nzpcmad

  James Avery wrote a classic article a while back entitled Ten Must-Have Tools Every Developer Should Download Now which is a companion to Visual Studio Add-Ins Every Developer Should Download Now and Scott Hanselman has an excellent list on his blog but if you were on a desert island and were only allowed three .NET development tools which ones would you pick? Update: Assuming you already have an IDE like Visual Studio ... Update (5) : Up to 08/01 : The current state of play: Reflector 13 Resharper 9 NUnit + TestDriven.Net 7 Refactor Pro 4 Process Explorer (other Sysinternals) 3 SnippetCompiler 3 CodeRush 3 MSDN Library 2 LinqPad 2 Cruisecontrol.net 2 VMWare 2 RhinoMocks 2 Fiddler 2 PowerShell 2 PowerCommands for VS 2008 1 Sandcastle 1 SQL Profiler 1 Redgate ANTS profiler 11 NCover 1 VisualSVN 1 Rubber Ducky 1 WinMerge 1 NAnt 1 ViEmu 1 AnkhSVN 1 dotTrace Profiler 1 BeyondCompare 1 DPack VS Plugin 1 WCF Trace Viewer (SDK) 1 xUnit.net 1 SourceGear DiffMerge 1 Ghostdoc 1 Expression Studio 1 XAML Pad 1 KaXaml 1 Blender for 3D modeling 1 Snoop a WPF tool 1 DiffMerge 1 DPack 1 NDepend 1 Kodos 1 WatiN 1 HTTPWatch Basic Edition 1 Paint.Net 1 Mole For VS 1 What I find particularly interesting about this is that "NUnit + TestDriven.Net " is right up there in third place which shows the growing emphasis on testing as an integral part of the development process rather than as an adjunct which is simply bolted on. And I'm somewhat perplexed that Codesmith didn't receive a single vote?

  Read the article

• DRY Validation with MVC2

  - by Matthew

  Hi All, I'm trying to figure out how I can define validation rules for my domain objects in one single location within my application but have run in to a snag... Some background: My location has several parts: - Database - DAL - Business Logic Layer - SOAP API Layer - MVC website The MVC website accesses the database via the SOAP API, just as third parties would. We are using server and and client side validation on the MVC website as well as in the SOAP API Layer. To avoid having to manually write client side validation we are implementing strongly typed views in conjunction with the Html.TextBoxFor and Html.ValidationMessageFor HTML helpers, as shown in Step 3 here. We also create custom models for each form where one form takes input for multiple domain objects. This is where the problem begins, the HTML helpers read from the model for the data annotation validation attributes. In most cases our forms deal with multiple domain objects and you can't specify more than one type in the <%@Page ... Inherits="System.Web.Mvc.ViewPage" % page directive. So we are forced to create a custom model class, which would mean duplicating validation attributes from the domain objects on to the model class. I've spent quite some time looking for workarounds to this, such has referencing the same MetadataType from both the domain class and the custom MVC models, but that won't work for several reasons: You can only specify one MetadataType attribute per class, so its a problem if a model references multiple domain objects, each with their own metadata type. The data annotation validation code throws an exception if the model class doesn't contain a property that is specified in the referenced MetadataType which is a problem with the model only deals with a subset of the properties for a given domain object. I've looked at other solutions as well but to no avail. If anyone has any ideas on how to achieve a single source for validation logic that would work across MVC client and server side validation functionality and other locations (such as my SOAP API) I would love to hear it! Thanks in advance, Matthew

  Read the article

• XmlSerializer Deserialize failures

  - by smvlad

  I have wsdl from third party server. Method that i'm interested in returns XmlNode. My thought was wrap web methods and use XmlSerializer to return strongly typed objects. Returned xml looks like this (i removed soap headers): <Response xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ResponseExt" xmlns="http://www.thirdparty.com/lr/"> <Code>0</Code> <Message>SUCCESS</Message> <SessionId>session_token</SessionId> </Response> Looked simple. Created a class: [XmlRoot("Response")] public class MyClass { public string Code {get; set;} public string Message {get; set;} public string SessionId {get; set;} } Processing time: //XmlNode node = xml from above XmlSerializer serializer = new XmlSerializer(typeof(MyClass)); XmlNodeReader reader = new XmlNodeReader(node); Myclass myclass = serializer.Deserialize(reader) as MyClass Last line is where it blows up with inner exception message: The specified type was not recognized: name='ResponseExt', namespace='http://www.thirdparty.com/lr/', at . I can't figure out how to make Serializer happy and what exactly these two mean xsi:type="ResponseExt" xmlns="http://www.thirdparty.com/lr/ As always any advice and pointer are appreciated

  Read the article

• Forcing UIInterfaceOrientation changes on iPhone

  - by Andiih

  I'm strugging with getting an iPhone application which requires just about every push or pop in the Nav Controller Stack to change orientation. Basically the first view is portrait, the second landscape the third portrait again (Yes I know this is less than ideal, but that's the design and I've got to implement it). I've been through various advice on here.... http://stackoverflow.com/questions/995723/how-do-i-detect-a-rotation-on-the-iphone-without-the-device-autorotating http://stackoverflow.com/questions/1824682/force-portrait-orientation-on-pushing-new-view-to-uinavigationviewcontroller http://stackoverflow.com/questions/181780/is-there-a-documented-way-to-set-the-iphone-orientation But without total success. Setting to link against 3.1.2 my reading of the linked articles above seems to indicate that if my portrait view pushes a view with - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return ((interfaceOrientation == UIInterfaceOrientationLandscapeRight) ); } Then then that view should appear rotated to landscape. What happens is it appears in its "broken" portrait form, then rotates correctly as the device is turned. If I pop the controller back to my portrait view (which has an appropriate shouldAutoRotate...) then that remains in broken landscape view until the device is returned to portrait orientation. I've also tried removing all the shouldautorotate messages, and instead forcing rotation by transforming the view. This kind of works, and I've figured out that by moving the status bar (which is actually hidden in my application) [UIApplication sharedApplication].statusBarOrientation = UIInterfaceOrientationLandscapeRight; the keyboard will appear with the correct orientation when desired. The problem with this approach is that the status bar transform is weird and ugly when you don't have a status bar - a shadow looms over the page with each change. So. What am I missing. 1) Am I wrong in thinking that in 3.1.2 (or possibly earlier) shouldAutorotateToInterfaceOrientation should provide the desired orientation simply by pushing controllers ? 2) Is there another way of getting keyboards to appear in the correct orientation. 3) Are the undocumented API calls the way to go (please no!)

  Read the article

< Previous Page | 206 207 208 209 210 211 212 213 214 215 216 217  | Next Page >