Search Results

Search found 18331 results on 734 pages for 'blog engine'.

Page 211/734 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

  • When is your interview?

    - by Rob Farley
    Sometimes it’s tough to evaluate someone – to figure out if you think they’d be worth hiring. These days, since starting LobsterPot Solutions, I have my share of interviews, on both sides of the desk. Sometimes I’m checking out potential staff members; sometimes I’m persuading someone else to get us on board for a project. Regardless of who is on which side of the desk, we’re both checking each other out. The world is not how it was some years ago. I’m pretty sure that every time I walk into a room for an interview, I’ve searched for them online, and they’ve searched for me. I suspect they usually have the easier time finding me, although there are obviously other Rob Farleys in the world. They may have even checked out some of my presentations from conferences, read my blog posts, maybe even heard me tell jokes or sing. I know some people need me to explain who I am, but for the most part, I think they’ve done plenty of research long before I’ve walked in the room. I remember when this was different (as it could be for you still). I remember a time when I dealt with recruitment agents, looking for work. I remember sitting in rooms having been giving a test designed to find out if I knew my stuff or not, and then being pulled into interviews with managers who had to find out if I could communicate effectively. I’d need to explain who I was, what kind of person I was, what my value-system involved, and so on. I’m sure you understand what I’m getting at. (Oh, and in case you hadn’t realised, it’s a T-SQL Tuesday post, this month about interviews.) At TechEd Australia some years ago (either 2009 or 2010 – I forget which), I remember hearing a comment made during the ‘locknote’, the closing session. The presenter described a conversation he’d heard between two girls, discussing a guy that one of them had just started dating. The other girl expressed horror at the fact that her friend had met this guy in person, rather than through an online dating agency. The presenter pointed out that people realise that there’s a certain level of safety provided through the checks that those sites do. I’m not sure I completely trust this, but I’m sure it’s true for people’s technical profiles. If I interview someone, I hope they have a profile. I hope I can look at what they already know. I hope I can get samples of their work, and see how they communicate. I hope I can get a feel for their sense of humour. I hope I already know exactly what kind of person they are – their value system, their beliefs, their passions. Even their grammar. I can work out if the person is a good risk or not from who they are online. If they don’t have an online presence, then I don’t have this information, and the risk is higher. So if you’re interviewing with me, your interview started long before the conversation. I hope it started before I’d ever heard of you. I know the interview in which I’m being assessed started before I even knew there was a product called SQL Server. It’s reflected in what I write. It’s in the way I present. I have spent my life becoming me – so let’s talk! @rob_farley

    Read the article

  • Getting Started with StreamInsight 2.1

    - by Roman Schindlauer
    If you're just beginning to get familiar with StreamInsight, you may be looking for a way to get started. What are the basics? How can I get my first StreamInsight application running so I can see how it works? Where is the 'front door' that will get me going? If that describes you, then this blog entry might be just what you need. If you're already a StreamInsight wiz, keep reading anyway - you may find some helpful links here that you weren't aware of. But here's what we'd like from you experienced readers in particular: if you know of other good resources that we missed, please feel free to add them in the comments below. We appreciate you sharing your expertise. The Book The basic documentation for StreamInsight is located in the MSDN Library (Microsoft StreamInsight 2.1). You'll notice that previous versions of StreamInsight are still there (1.2 and 2.0), but if you're just getting started you can stick to the 2.1 section. The documentation has been organized to function as reference material, which is fine after you're familiar with the technology. But if you're trying to learn the basics, you might want to take a different path instead of just starting at the top. The following is one map you can use. What Is StreamInsight? Here is a sequence of topics that should give you a good overview of what StreamInsight is and how it works: Overview answers the question, "what is it?" StreamInsight Server Architecture gives you a quick look at a high-level architectural drawing StreamInsight Concepts lays out an overview of the basic components Deploying StreamInsight Entities to a StreamInsight Server describes the mechanics of how these components work together Getting an Example Running Once you have this background, go ahead and install StreamInsight and get a basic example up and running: Installation download and install the software StreamInsight Examples walk through a set of 3 simple StreamInsight applications that work together to demonstrate what you learned in the topics above; you can copy and paste the code into Visual Studio, compile, and run That's it - you now have a real, functioning StreamInsight system! Now that you have a handle on the basics, you might want to start digging deeper. Digging Deeper Here's a suggested path through the documentation to help you understand the next layer of StreamInsight technologies: Using Event Sources and Event Sinks sources supply data and sinks consume it; this topic gives you an overview of how they work Publishing and Connecting to the StreamInsight Server practical details on how to set up a StreamInsight server A Hitchhiker’s Guide to StreamInsight 2.1 Queries queries are the heart of how StreamInsight performs data analytics, and this whitepaper will help you really understand how they work Using StreamInsight LINQ root through this section for technical details on specific query components Using the StreamInsight Event Flow Debugger in addition to troubleshooting, the debugger is a great way to learn more about what goes on inside a StreamInsight application And Even Deeper Finally, to get a handle on some of the more complex things you can do with StreamInsight, dig into these: Input and Output Adapters adapters can be useful for handling more complex sources and sinks Building Resilient StreamInsight Applications a resilient application is able to recover from system failures Operations this section will help you monitor and troubleshoot a running StreamInsight system The StreamInsight Community As you're designing and developing your StreamInsight solutions, you probably will find it helpful to see working examples or to learn tips and tricks from others. Or maybe you need a place to post a vexing question. Here are some community resources that we have found useful. If you know of others, please add them in the comments below. Code samples and tools Official StreamInsight code samples Introduction to LinqPad Driver for StreamInsight 2.1 - LinqPad is a very useful tool for developing queries The following case studies are based on earlier versions of StreamInsight, but they still are useful examples: Microsoft Media Analytics - real-time monitoring and analytic Edgenet - responding to information from multiple source ICONICS - managing energy usage Blogs Microsoft StreamInsight Ruminations of J.net Richard Seroter's Architecture Musings pluralsight Forums MSDN StreamInsight Forum stackoverflow Training Microsoft StreamInsight Fundamentals (“Introducing StreamInsight” is free) from pluralsight Twitter @streaminsight   You’re a StreamInsight Expert That should get you going. Please add any other resources you have found useful in the comments below.   Regards, The StreamInsight Team

    Read the article

  • SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

    - by jorg
    We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

    Read the article

  • PASS Summit 2012: keynote and Mobile BI announcements #sqlpass

    - by Marco Russo (SQLBI)
    Today at PASS Summit 2012 there have been several announcements during the keynote. Moreover, other news have not been highlighted in the keynote but are equally if not more important for the BI community. Let’s start from the big news in the keynote (other details on SQL Server Blog): Hekaton: this is the codename for in-memory OLTP technology that will appear (I suppose) in the next release of the SQL Server relational engine. The improvement in performance and scalability is impressive and it enables new scenarios. I’m curious to see whether it can be used also to improve ETL performance and how it differs from using SSD technology. Updates on Columnstore: In the next major release of SQL Server the columnstore indexes will be updatable and it will be possible to create a clustered index with Columnstore index. This is really a great news for near real-time reporting needs! Polybase: in 2013 it will debut SQL Server 2012 Parallel Data Warehouse (PDW), which will include the Polybase technology. By using Polybase a single T-SQL query will run queries across relational data and Hadoop data. A single query language for both. Sounds really interesting for using BigData in a more integrated way with existing relational databases. And, of course, to load a data warehouse using BigData, which is the ultimate goal that we all BI Pro have, right? SQL Server 2012 SP1: the Service Pack 1 for SQL Server 2012 is available now and it enable the use of PowerPivot for SharePoint and Power View on a SharePoint 2013 installation with Excel 2013. Power View works with Multidimensional cube: the long-awaited feature of being able to use PowerPivot with Multidimensional cubes has been shown by Amir Netz in an amazing demonstration during the keynote. The interesting thing is that the data model behind was based on a many-to-many relationship (something that is not fully supported by Power View with Tabular models). Another interesting aspect is that it is Analysis Services 2012 that supports DAX queries run on a Multidimensional model, enabling the use of any future tool generating DAX queries on top of a Multidimensional model. There are still no info about availability by now, but this is *not* included in SQL Server 2012 SP1. So what about Mobile BI? Well, even if not announced during the keynote, there is a dedicated session on this topic and there are very important news in this area: iOS, Android and Microsoft mobile platforms: the commitment is to get data exploration and visualization capabilities working within June 2013. This should impact at least Power View and SharePoint/Excel Services. This is the type of UI experience we are all waiting for, in order to satisfy the requests coming from users and customers. The important news here is that native applications will be available for both iOS and Windows 8 so it seems that Android will be supported initially only through the web. Unfortunately we haven’t seen any demo, so it’s not clear what will be the offline navigation experience (and whether there will be one). But at least we know that Microsoft is working on native applications in this area. I’m not too surprised that HTML5 is not the magic bullet for all the platforms. The next PASS Business Analytics conference in 2013 seems a good place to see this in action, even if I hope we don’t have to wait other six months before seeing some demo of native BI applications on mobile platforms! Viewing Reporting Services reports on iPad is supported starting with SQL Server 2012 SP1, which has been released today. This is another good reason to install SP1 on SQL Server 2012. If you are at PASS Summit 2012, come and join me, Alberto Ferrari and Chris Webb at our book signing event tomorrow, Thursday 8 2012, at the bookstore between 12:00pm and 12:30pm, or follow one of our sessions!

    Read the article

  • What 5 things should SQL Server get rid of?

    - by BuckWoody
    I’ve been “tagged” by my friend Paul Randal. It’s a high-tech way of making someone else do what you want, but since it’s Paul, well, I guess I’m OK with that. He’s asked in his recent blog entry “What five things would you get rid of in SQL Server if you were in charge?” This is, of course, a delicate issue. After all, I work at Microsoft, so anything I say here might be taken as a criticism that would require action – but of course it really doesn’t. Interestingly, you may have more to do with what goes in to SQL Server than I did even as a Program Manager where I “owned” a feature. Unlike many places I’ve worked, Microsoft really does drive its products by what its users want – not every time, and not every user request, mind you, but overall I think we hit the mark pretty well. So, with all of that said, and of course the obligatory statement of “these are my own opinions, and have nothing to do with any official Microsoft position in any way, and do not reflect the opinions of other Microsoft employees or management”, here goes. 1. Get rid of SQL Server Management Studio Does that surprise you? After all, when I was a Program Manager, I actually owned the general architecture for SSMS. But those on my team probably would have been able to guess this one for you. I think that SSMS is a fine development tool. But I think that it does less of a good job for managing a system. It’s based on Visual Studio, probably one of the best development IDE’s around. And when I develop code, I really like it. But for a monitoring/management tool, I prefer a snap-in to the Microsoft Management Console (MMC). I know, the old one (prior to 3.0) was kludgy, difficult to use and program in. But that’s changed. Of course, when I bring this up, you’ll probably immediately say “But I don’t have that in XP.” And that’s one of the reasons we didn’t go there. (But I still don’t like SSMS for management.) 2. ShrinkDB I think this discussion has been done to death, so I’ll leave it at that. 3. SQL Server Agent Does that one surprise you as well? In my mind, since we ALWAYS ride on Windows, just use the task scheduler there, along with PowerShell. You could log the results in Windows logs, files, back into SQL Server, whatever. It’s just a complexity we don’t need in SQL Server. 4. SQL Server Error Logs We have a full logging setup in Windows. They’re well done, easy to understand and ubiquitous. We should just use that. 5. Several SKU’s I won’t say which, but we have a few SKU’s of SQL Server that need to go. And we need to figure out how to help you understand clearly where you need to go to Enterprise or Data Center.  Most folks are trying to push Standard edition to do things it isn’t designed to do, and then they think SQL Server won’t scale. I think we can do a better job of showing you where Standard Edition will hit the wall, and I think with fewer choices it would be pretty simple for you to pick the right one. Well, once again I’ve probably puzzled some folks and angered others. I think my work here is done. :) Back to you, Paul. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Investigating on xVelocity (VertiPaq) column size

    - by Marco Russo (SQLBI)
      In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

    Read the article

  • Olympics data available for all on Windows Azure SQL Database and Power View

    - by jamiet
    Are you looking around for some decent test data for your BI demos? Well, if so, Microsoft have provided some data about all medals won at the Olympics Games (1900 to 2008) at OlympicsData workbook - Excel, SSIS, Azure sample; it provides analysis over athletes, countries, medal type, sport, discipline and various other dimensions. The data has been provided in an Excel workbook along with instructions on how to load the data into a Windows Azure SQL Database using SQL Server Integration Services (SSIS). Frankly though, the rigmarole of standing up your own Windows Azure SQL Database ok, SQL Azure database, is both costly (SQL Azure isn’t free) and time consuming (the provided instructions aren’t exactly an idiot’s guide and getting SSIS to work properly with Excel isn’t a barrel of laughs either). To ease the pain for all you BI folks out there that simply want to party on the data I have loaded it all into the SQL Azure database that I use for hosting AdventureWorks on Azure. You can read more about AdventureWorks on Azure below however I’ll summarise here by saying it is a SQL Azure database provided for the use of the SQL Server community and which is supported by voluntary donations. To view the data the credentials you need are: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly Type those into SSMS and away you go, the data is provided in four tables [olympics].[Sport], [olympics].[Discipline], [olympics].[Event] & [olympics].[Medalist]: I figured this would be a good candidate for a Power View report so I fired up Excel 2013 and built such a report to slice’n’dice through the data – here are some screenshots that should give you a flavour of what is available: A view of all the available data Where do all the gymastics medals go? Which countries do top ten all-time medal winners come from? You get the idea. There is masses of information here and if you have Excel 2013 handy Power View provides a quick and easy way of surfing through it. To save you the bother of setting up the Power View report yourself you can have the one that I took these screenshots from, it is available on my SkyDrive at OlympicsAnalysis.xlsx so just hit the link and download to play to your heart’s content. Party on, people! As I said above the data is hosted on a SQL Azure database that I use for hosting “AdventureWorks on Azure” which I first announced in March 2013 at AdventureWorks2012 now available for all on SQL Azure. I’ll repeat the pertinent parts of that blog post here: I am pleased to announce that as of today … [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use for their own means. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected] Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more than we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. I’d like to emphasize that last point. If my hosting this Olympics data is useful to you please support this initiative by donating. Thanks in advance. @Jamiet

    Read the article

  • Investigating on xVelocity (VertiPaq) column size

    - by Marco Russo (SQLBI)
      In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

    Read the article

  • Parameterized StreamInsight Queries

    - by Roman Schindlauer
    The changes in our APIs enable a set of scenarios that were either not possible before or could only be achieved through workarounds. One such use case that people ask about frequently is the ability to parameterize a query and instantiate it with different values instead of re-deploying the entire statement. I’ll demonstrate how to do this in StreamInsight 2.1 and combine it with a method of using subjects for dynamic query composition in a mini-series of (at least) two blog articles. Let’s start with something really simple: I want to deploy a windowed aggregate to a StreamInsight server, and later use it with different window sizes. The LINQ statement for such an aggregate is very straightforward and familiar: var result = from win in stream.TumblingWindow(TimeSpan.FromSeconds(5))               select win.Avg(e => e.Value); Obviously, we had to use an existing input stream object as well as a concrete TimeSpan value. If we want to be able to re-use this construct, we can define it as a IQStreamable: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value)); The DefineStreamable API lets us define a function, in our case from a IQStreamable (the input stream) and a TimeSpan (the window length) to an IQStreamable (the result). We can then use it like a function, with the input stream and the window length as parameters: var result = avg(stream, TimeSpan.FromSeconds(5)); Nice, but you might ask: what does this save me, except from writing my own extension method? Well, in addition to defining the IQStreamable function, you can actually deploy it to the server, to make it re-usable by another process! When we deploy an artifact in V2.1, we give it a name: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); When connected to the same server, we can now use that name to retrieve the IQStreamable and use it with our own parameters: var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); var result = averageQuery(stream, TimeSpan.FromSeconds(5)); Convenient, isn’t it? Keep in mind that, even though the function “AverageQuery” is deployed to the server, its logic will still be instantiated into each process when the process is created. The advantage here is being able to deploy that function, so another client who wants to use it doesn’t need to ask the author for the code or assembly, but just needs to know the name of deployed entity. A few words on the function signature of GetStreamable: the last type parameter (here: double) is the payload type of the result, not the actual result stream’s type itself. The returned object is a function from IQStreamable<SourcePayload> and TimeSpan to IQStreamable<double>. In the next article we will integrate this usage of IQStreamables with Subjects in StreamInsight, so stay tuned! Regards, The StreamInsight Team

    Read the article

  • What is wrong with my gtkrc file?

    - by PP
    I have written following gtkrc file from some other theme gtkrc file. This theme is normal theme with buttons using pixmap theme engine. I have also given background image to GtkEntry. Problem is that, When i use this theme my buttons doesn't show text one them and my entry box does not show cursor. Plus in engine "pixmap" tag I need to specify image name with it's path as I have already mentioned pixmap_path on the top of rc file but why I still need to specify the path in file = "xxx" # gtkrc file. pixmap_path "./backgrounds:./icons:./buttons:./emotions" gtk-button-images = 1 #Icon Sizes and color definitions gtk-icon-sizes = "gtk-small-toolbar=16,16:gtk-large-toolbar=24,24:gtk-button=16,16" gtk-toolbar-icon-size = GTK_ICON_SIZE_SMALL_TOOLBAR gtk_color_scheme = "fg_color:#000000\nbg_color:#848484\nbase_color:#000000\ntext_color:#000000\nselected_bg_color:#f39638\nselected_fg_color:#000000\ntooltip_bg_color:#634110\ntooltip_fg_color:#ffffff" style "theme-default" { xthickness = 10 ythickness = 10 GtkEntry::honors-transparent-bg-hint = 0 GtkMenuItem::arrow-spacing = 20 GtkMenuItem::horizontal-padding = 50 GtkMenuItem::toggle-spacing = 30 GtkOptionMenu::indicator-size = {11, 5} GtkOptionMenu::indicator-spacing = {6, 5, 4, 4} GtkTreeView::horizontal_separator = 5 GtkTreeView::odd_row_color = "#efefef" GtkTreeView::even_row_color = "#e3e3e3" GtkWidget::link-color = "#0062dc" # blue GtkWidget::visited-link-color = "#8c00dc" #purple GtkButton::default_border = { 0, 0, 0, 0 } GtkButton::child-displacement-x = 0 GtkButton::child-displacement-y = 1 GtkWidget::focus-padding = 0 GtkRange::trough-border = 0 GtkRange::slider-width = 19 GtkRange::stepper-size = 19 GtkScrollbar::min_slider_length = 36 GtkScrollbar::has-secondary-backward-stepper = 1 GtkPaned::handle_size = 8 GtkMenuBar::internal-padding = 0 GtkTreeView::expander_size = 13 #15 GtkExpander::expander_size = 13 #17 GtkScale::slider-length = 35 GtkScale::slider-width = 17 GtkScale::trough-border = 0 GtkWidget::link-color = "#0062dc" GtkWidget::visited-link-color = "#8c00dc" #purple WnckTasklist::fade-overlay-rect = 0 WnckTasklist::fade-loop-time = 5.0 # 5 seconds WnckTasklist::fade-opacity = 0.5 # final opacity #makes menu only overlap border GtkMenu::horizontal-offset = -1 #removes extra padding at top and bottom of menus. Makes menuitem overlap border GtkMenu::vertical-padding = 0 #set to the same as roundness, used for better hotspot selection of tabs GtkNotebook::tab-curvature = 2 GtkNotebook::tab-overlap = 4 GtkMenuItem::arrow-spacing = 10 GtkOptionMenu ::indicator-size = {11, 5} GtkCheckButton ::indicator-size = 16 GtkCheckButton ::indicator-spacing = 1 GtkRadioButton ::indicator-size = 16 GtkTreeView::horizontal_separator = 2 GtkTreeView::odd_row_color = "#efefef" GtkTreeView::even_row_color = "#e3e3e3" NautilusIconContainer::normal_icon_color = "#ff0000" GtkEntry::inner-border = {0, 0, 0, 0} GtkScrolledWindow::scrollbar-spacing = 0 GtkScrolledWindow::scrollbars-within-bevel = 1 fg[NORMAL] = @fg_color fg[ACTIVE] = @fg_color fg[PRELIGHT] = @fg_color fg[SELECTED] = @selected_fg_color fg[INSENSITIVE] = shade (3.0,@fg_color) bg[NORMAL] = @bg_color bg[ACTIVE] = shade (0.95,@bg_color) bg[PRELIGHT] = mix(0.92, shade (1.1,@bg_color), @selected_bg_color) bg[SELECTED] = @selected_bg_color bg[INSENSITIVE] = shade (1.06,@bg_color) base[NORMAL] = @base_color base[ACTIVE] = shade (0.65,@base_color) base[PRELIGHT] = @base_color base[SELECTED] = @selected_bg_color base[INSENSITIVE] = shade (1.025,@bg_color) text[NORMAL] = @text_color text[ACTIVE] = shade (0.95,@base_color) text[PRELIGHT] = @text_color text[SELECTED] = @selected_fg_color text[INSENSITIVE] = mix (0.675,shade (0.95,@bg_color),@fg_color) } style "theme-entry" { xthickness = 10 ythickness = 10 GtkEntry::inner-border = {10, 10, 10, 10} GtkEntry::progress-border = {10, 10, 10, 10} GtkEntry::icon-prelight = 1 GtkEntry::state-hintt = 1 #GtkEntry::honors-transparent-bg-hint = 1 text[NORMAL] = "#000000" text[ACTIVE] = "#787878" text[INSENSITIVE] = "#787878" text[SELECTED] = "#FFFFFF" engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = FALSE file = "./backgrounds/entry_background.png" border = { 0, 0, 0, 0 } stretch = TRUE } image { function = FLAT_BOX state = PRELIGHT recolorable = FALSE file = "./backgrounds/entry_background.png" border = { 0, 0, 0, 0 } stretch = TRUE } image { function = FLAT_BOX state = ACTIVE recolorable = FALSE file = "./backgrounds/entry_background.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } #----------------------------------------------- #Chat Balloon Incoming background. style "theme-event-box-top-in" { xthickness = 1 ythickness = 1 GtkEventBox::inner-border = {0, 0, 0, 0} engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = TRUE file = "./backgrounds/chat_in_top.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } style "theme-event-box-mid-in" { xthickness = 1 ythickness = 1 GtkEventBox::inner-border = {0, 0, 0, 0} engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = TRUE file = "./backgrounds/chat_in_mid.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } style "theme-event-box-bot-in" { xthickness = 1 ythickness = 1 GtkEventBox::inner-border = {0, 0, 0, 0} engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = TRUE file = "./backgrounds/chat_in_bot.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } #----------------------------------------------- #Chat Balloon Outgoing background. style "theme-event-box-top-out" { xthickness = 1 ythickness = 1 GtkEventBox::inner-border = {0, 0, 0, 0} engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = TRUE file = "./backgrounds/chat_out_top.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } style "theme-event-box-mid-out" { xthickness = 1 ythickness = 1 GtkEventBox::inner-border = {0, 0, 0, 0} engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = TRUE file = "./backgrounds/chat_out_mid.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } style "theme-event-box-bot-out" { xthickness = 1 ythickness = 1 GtkEventBox::inner-border = {0, 0, 0, 0} engine "pixmap" { image { function = FLAT_BOX state = NORMAL recolorable = TRUE file = "./backgrounds/chat_out_bot.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } style "theme-wide" = "theme-default" { xthickness = 2 ythickness = 2 } style "theme-wider" = "theme-default" { xthickness = 3 ythickness = 3 } style "theme-button" { GtkButton::inner-border = {0, 0, 0, 0} GtkWidget::focus-line-width = 0 GtkWidget::focus-padding = 0 bg[NORMAL] = "#414143" bg[ACTIVE] = "#c19676" bg[PRELIGHT] = "#7f4426" bg[SELECTED] = "#ff0000" bg[INSENSITIVE] = "#434346" fg[NORMAL] = "#ffffff" fg[INSENSITIVE] = "#000000" fg[PRELIGHT] = "#ffffff" fg[SELECTED] = "#ffffff" fg[ACTIVE] = "#ffffff" text[NORMAL] = "#ff0000" text[INSENSITIVE] = "#ff0000" text[PRELIGHT] = "#ff0000" text[SELECTED] = "#ff0000" text[INSENSITIVE] = "#434346" text[ACTIVE] = "#ff0000" base[NORMAL] = "#ff0000" base[INSENSITIVE] = "#ff0000" base[PRELIGHT] = "#ff0000" base[SELECTED] = "#ff0000" base[INSENSITIVE] = "#ff0000" engine "pixmap" { image { function = BOX state = NORMAL recolorable = TRUE file = "./buttons/LightButtonAct.png" border = { 0, 0, 0, 0 } stretch = TRUE } image { function = BOX state = PRELIGHT recolorable = TRUE file = "./buttons/LightButtonRoll.png" border = { 0, 0, 0, 0 } stretch = TRUE } image { function = BOX state = ACTIVE recolorable = TRUE file = "./buttons/LightButtonClicked.png" border = { 0, 0, 0, 0 } stretch = TRUE } image { function = BOX state = INSENSITIVE recolorable = TRUE file = "./buttons/LightButtonInact.png" border = { 0, 0, 0, 0 } stretch = TRUE } } } style "theme-toolbar" { xthickness = 2 ythickness = 2 bg[NORMAL] = shade (1.078,@bg_color) } style "theme-handlebox" { bg[NORMAL] = shade (0.95,@bg_color) } style "theme-scale" { bg[NORMAL] = shade (1.06, @bg_color) bg[PRELIGHT] = mix(0.85, shade (1.1,@bg_color), @selected_bg_color) bg[SELECTED] = "#4d4d55" } style "theme-range" { bg[NORMAL] = shade (1.12,@bg_color) bg[ACTIVE] = @bg_color bg[PRELIGHT] = mix(0.95, shade (1.10,@bg_color), @selected_bg_color) #Arrows text[NORMAL] = shade (0.275,@selected_fg_color) text[PRELIGHT] = @selected_fg_color text[ACTIVE] = shade (0.10,@selected_fg_color) text[INSENSITIVE] = mix (0.80,shade (0.90,@bg_color),@fg_color) } style "theme-notebook" = "theme-wider" { xthickness = 4 ythickness = 4 GtkNotebook::tab-curvature = 5 GtkNotebook::tab-vborder = 1 GtkNotebook::tab-overlap = 1 GtkNotebook::tab-vborder = 1 bg[NORMAL] = "#d2d2d2" bg[ACTIVE] = "#e3e3e3" bg[PRELIGHT] = "#848484" bg[SELECTED] = "#848484" bg[INSENSITIVE] = "#848484" text[PRELIGHT] = @selected_fg_color text[NORMAL] = "#000000" text[ACTIVE] = "#737373" text[SELECTED] = "#000000" text[INSENSITIVE] = "#737373" fg[PRELIGHT] = @selected_fg_color fg[NORMAL] = "#000000" fg[ACTIVE] = "#737373" fg[SELECTED] = "#000000" fg[INSENSITIVE] = "#737373" } style "theme-paned" { bg[PRELIGHT] = shade (1.1,@bg_color) } style "theme-panel" { # Menu fg[PRELIGHT] = @selected_fg_color font_name = "Bold 9" text[PRELIGHT] = @selected_fg_color } style "theme-menu" { xthickness = 0 ythickness = 0 bg[NORMAL] = shade (1.16,@bg_color) bg[SELECTED] = "#ff9a00" text[PRELIGHT] = @selected_fg_color fg[PRELIGHT] = @selected_fg_color } style "theme-menu-item" = "theme-menu" { xthickness = 3 ythickness = 3 base[SELECTED] = "#ff9a00" base[NORMAL] = "#ff9a00" base[PRELIGHT] = "#ff9a00" base[INSENSITIVE] = "#ff9a00" base[ACTIVE] = "#ff9a00" bg[SELECTED] = "#ff9a00" bg[NORMAL] = shade (1.16,@bg_color) } style "theme-menubar" { #TODO } style "theme-menubar-item" = "theme-menu-item" { #TODO bg[SELECTED] = "#ff9a00" } style "theme-tree" { xthickness = 2 ythickness = 1 font_name = "Bold 9" GtkWidget::focus-padding = 0 bg[NORMAL] = "#5a595a" bg[PRELIGHT] = "#5a595a" bg[ACTIVE] = "#5a5a5a" fg[NORMAL] = "#ffffff" fg[ACTIVE] = "#ffffff" fg[SELECTED] = "#ff9a00" fg[PRELIGHT] = "#ffffff" bg[SELECTED] = "#ff9a00" base[SELECTED] = "#ff9a00" base[NORMAL] = "#ff9a00" base[PRELIGHT] = "#ff9a00" base[INSENSITIVE] = "#ff9a00" base[ACTIVE] = "#ff9a00" text[NORMAL] = "#000000" text[PRELIGHT] = "#ff9a00" text[ACTIVE] = "#ff9a00" text[SELECTED] = "#ff9a00" text[INSENSITIVE] = "#434346" } style "theme-tree-arrow" { bg[NORMAL] = mix(0.70, shade (0.60,@bg_color), shade (0.80,@selected_bg_color)) bg[PRELIGHT] = mix(0.80, @bg_color, @selected_bg_color) } style "theme-progressbar" { font_name = "Bold" bg[SELECTED] = @selected_bg_color fg[PRELIGHT] = @selected_fg_color bg[ACTIVE] = "#fe7e00" bg[NORMAL] = "#ffba00" } style "theme-tooltips" = "theme-wider" { font_name = "Liberation sans 10" bg[NORMAL] = @tooltip_bg_color fg[NORMAL] = @tooltip_fg_color text[NORMAL] = @tooltip_fg_color } style "theme-combo" = "theme-button" { xthickness = 4 ythickness = 4 text[NORMAL] = "#fd7d00" text[INSENSITIVE] = "#8a8a8a" base[NORMAL] = "#e0e0e0" base[INSENSITIVE] = "#aeaeae" } style "theme-combo-box" = "theme-button" { xthickness = 3 ythickness = 2 bg[NORMAL] = "#343539" bg[PRELIGHT] = "#343539" bg[ACTIVE] = "#26272b" bg[INSENSITIVE] = "#404145" } style "theme-entry-combo-box" { xthickness = 6 ythickness = 3 text[NORMAL] = "#000000" text[INSENSITIVE] = "#8a8a8a" base[NORMAL] = "#ffffff" base[INSENSITIVE] = "#aeaeae" } style "theme-combo-arrow" = "theme-button" { xthickness = 1 ythickness = 1 } style "theme-view" { xthickness = 0 ythickness = 0 } style "theme-check-radio-buttons" { GtkWidget::interior-focus = 0 GtkWidget::focus-padding = 1 text[NORMAL] = "#ff0000" base[NORMAL] = "#ff0000" text[SELECTED] = "#ffffff" text[INSENSITIVE] = shade (0.625,@bg_color) base[PRELIGHT] = mix(0.80, @base_color, @selected_bg_color) bg[NORMAL] = "#438FC6" bg[INSENSITIVE] = "#aeaeae" bg[SELECTED] = "#ff8a01" } style "theme-radio-buttons" = "theme-button" { GtkWidget::interior-focus = 0 GtkWidget::focus-padding = 1 text[SELECTED] = @selected_fg_color text[INSENSITIVE] = shade (0.625,@bg_color) base[PRELIGHT] = mix(0.80, @base_color, @selected_bg_color) bg[NORMAL] = "#ffffff" bg[INSENSITIVE] = "#dcdcdc" bg[SELECTED] = @selected_bg_color } style "theme-spin-button" { bg[NORMAL] = "#d2d2d2" bg[ACTIVE] = "#868686" bg[PRELIGHT] = "#7f4426" bg[SELECTED] = shade(1.10,@selected_bg_color) bg[INSENSITIVE] = "#dcdcdc" base[NORMAL] = "#ffffff" base[INSENSITIVE] = "#dcdcdc" text[NORMAL] = "#000000" text[INSENSITIVE] = "#aeaeae" } style "theme-calendar" { xthickness = 0 ythickness = 0 bg[NORMAL] = "#676767" bg[PRELIGHT] = shade(0.92,@bg_color) bg[ACTIVE] = "#ff0000" bg[INSENSITIVE] = "#ff0000" bg[SELECTED] = "#ff0000" text[PRELIGHT] = "#000000" text[NORMAL] = "#000000" text[INSENSITIVE]= "#000000" text[SELECTED] = "#ffffff" text[ACTIVE] = "#000000" fg[NORMAL] = "#ffffff" fg[PRELIGHT] = "#ffffff" fg[INSENSITIVE] = "#ffffff" fg[SELECTED] = "#ffffff" fg[ACTIVE] = "#ffffff" base[NORMAL] = "#ff0000" base[NORMAL] = "#aeaeae" base[INSENSITIVE] = "#00ff00" base[SELECTED] = "#f3720d" base[ACTIVE] = "#f3720d" } style "theme-separator-menu-item" { xthickness = 1 ythickness = 0 GtkSeparatorMenuItem::horizontal-padding = 2 # We are setting the desired height by using wide-separators # There is no other way to get the odd height ... GtkWidget::wide-separators = 1 GtkWidget::separator-width = 1 GtkWidget::separator-height = 5 } style "theme-frame" { xthickness = 10 ythickness = 0 GtkWidget::LABEL-SIDE-PAD = 14 GtkWidget::LABEL-PAD = 23 fg[NORMAL] = "#000000" fg[ACTIVE] = "#000000" fg[PRELIGHT] = "#000000" fg[SELECTED] = "#000000" fg[INSENSITIVE] = "#000000" bg[NORMAL] = "#e2e2e2" bg[ACTIVE] = "#000000" bg[PRELIGHT] = "#000000" bg[SELECTED] = "#000000" bg[INSENSITIVE] = "#000000" base[NORMAL] = "#000000" base[ACTIVE] = "#000000" base[PRELIGHT] = "#000000" base[SELECTED] = "#000000" base[INSENSITIVE]= "#000000" text[NORMAL] = "#000000" text[ACTIVE] = "#000000" text[PRELIGHT] = "#000000" text[SELECTED] = "#000000" text[INSENSITIVE]= "#000000" } style "theme-textview" { text[NORMAL] = "#000000" text[ACTIVE] = "#000000" text[PRELIGHT] = "#000000" text[SELECTED] = "#000000" text[INSENSITIVE] = "#434648" bg[NORMAL] = "#ffffff" bg[ACTIVE] = "#ffffff" bg[PRELIGHT] = "#ffffff" bg[SELECTED] = "#ffffff" bg[INSENSITIVE] = "#ffffff" fg[NORMAL] = "#ffffff" fg[ACTIVE] = "#ffffff" fg[PRELIGHT] = "#ffffff" fg[SELECTED] = "#ffffff" fg[INSENSITIVE] = "#ffffff" base[NORMAL] = "#ffffff" base[ACTIVE] = "#ffffff" base[PRELIGHT] = "#ffffff" base[SELECTED] = "#ff9a00" base[INSENSITIVE] = "#ffffff" } style "theme-clist" { text[NORMAL] = "#000000" text[ACTIVE] = "#000000" text[PRELIGHT] = "#000000" text[SELECTED] = "#000000" text[INSENSITIVE] = "#434648" bg[NORMAL] = "#353438" bg[ACTIVE] = "#ff9a00" bg[PRELIGHT] = "#ff9a00" bg[SELECTED] = "#ff9a00" bg[INSENSITIVE] = "#ffffff" fg[NORMAL] = "#000000" fg[ACTIVE] = "#ff9a00" fg[PRELIGHT] = "#ff9a00" fg[SELECTED] = "#fdff00" fg[INSENSITIVE] = "#757575" base[NORMAL] = "#ffffff" base[ACTIVE] = "#fdff00" base[PRELIGHT] = "#000000" base[SELECTED] = "#fdff00" base[INSENSITIVE] = "#757575" } style "theme-label" { bg[NORMAL] = "#414143" bg[ACTIVE] = "#c19676" bg[PRELIGHT] = "#7f4426" bg[SELECTED] = "#000000" bg[INSENSITIVE] = "#434346" fg[NORMAL] = "#000000" fg[INSENSITIVE] = "#434346" fg[PRELIGHT] = "#000000" fg[SELECTED] = "#000000" fg[ACTIVE] = "#000000" text[NORMAL] = "#ffffff" text[INSENSITIVE] = "#434346" text[PRELIGHT] = "#ffffff" text[SELECTED] = "#ffffff" text[ACTIVE] = "#ffffff" base[NORMAL] = "#000000" base[INSENSITIVE] = "#00ff00" base[PRELIGHT] = "#0000ff" base[ACTIVE] = "#f39638" } style "theme-button-label" { bg[NORMAL] = "#414143" bg[ACTIVE] = "#c19676" bg[PRELIGHT] = "#7f4426" bg[SELECTED] = "#000000" bg[INSENSITIVE] = "#434346" fg[NORMAL] = "#ffffff" fg[INSENSITIVE] = "#434346" fg[PRELIGHT] = "#ffffff" fg[SELECTED] = "#ffffff" fg[ACTIVE] = "#ffffff" text[NORMAL] = "#000000" text[INSENSITIVE] = "#434346" text[PRELIGHT] = "#000000" text[SELECTED] = "#000000" text[ACTIVE] = "#000000" base[NORMAL] = "#000000" base[INSENSITIVE] = "#00ff00" base[PRELIGHT] = "#0000ff" base[SELECTED] = "#ff00ff" base[ACTIVE] = "#ffff00" } style "theme-button-check-radio-label" { bg[NORMAL] = "#414143" bg[ACTIVE] = "#c19676" bg[PRELIGHT] = "#7f4426" bg[SELECTED] = "#000000" bg[INSENSITIVE] = "#434346" fg[NORMAL] = "#000000" fg[INSENSITIVE] = "#434346" fg[PRELIGHT] = "#000000" fg[SELECTED] = "#000000" fg[ACTIVE] = "#000000" text[NORMAL] = "#ffffff" text[INSENSITIVE] = "#434346" text[PRELIGHT] = "#ffffff" text[SELECTED] = "#000000" text[ACTIVE] = "#ffffff" base[NORMAL] = "#000000" base[INSENSITIVE] = "#00ff00" base[PRELIGHT] = "#0000ff" base[SELECTED] = "#ff00ff" base[ACTIVE] = "#ffff00" } style "theme-table" { bg[NORMAL] = "#848484" bg[ACTIVE] = "#c19676" bg[PRELIGHT] = "#7f4426" bg[SELECTED] = "#000000" bg[INSENSITIVE] = "#434346" } style "theme-iconview" { GtkWidget::focus-line-width=1 bg[NORMAL] = "#000000" bg[ACTIVE] = "#c19676" bg[PRELIGHT] = "#c19676" bg[SELECTED] = "#c19676" bg[INSENSITIVE] = "#969696" fg[NORMAL] = "#ffffff" fg[INSENSITIVE] = "#ffffff" fg[PRELIGHT] = "#ffffff" fg[SELECTED] = "#ffffff" fg[ACTIVE] = "#ffffff" text[NORMAL] = "#000000" text[INSENSITIVE] = "#434346" text[PRELIGHT] = "#000000" text[SELECTED] = "#000000" text[ACTIVE] = "#000000" base[NORMAL] = "#ffffff" base[INSENSITIVE] = "#434346" base[PRELIGHT] = "#FAD184" base[SELECTED] = "#FAD184" base[ACTIVE] = "#FAD184" } # Set Widget styles class "GtkWidget" style "theme-default" class "GtkScale" style "theme-scale" class "GtkRange" style "theme-range" class "GtkPaned" style "theme-paned" class "GtkFrame" style "theme-frame" class "GtkMenu" style "theme-menu" class "GtkMenuBar" style "theme-menubar" class "GtkEntry" style "theme-entry" class "GtkProgressBar" style "theme-progressbar" class "GtkToolbar" style "theme-toolbar" class "GtkSeparator" style "theme-wide" class "GtkCalendar" style "theme-calendar" class "GtkTable" style "theme-table" widget_class "*<GtkMenuItem>*" style "theme-menu-item" widget_class "*<GtkMenuBar>.<GtkMenuItem>*" style "theme-menubar-item" widget_class "*<GtkSeparatorMenuItem>*" style "theme-separator-menu-item" widget_class "*<GtkLabel>" style "theme-label" widget_class "*<GtkButton>" style "theme-button" widget_class "*<GtkButton>*<GtkLabel>*" style "theme-button-label" widget_class "*<GtkCheckButton>" style "theme-check-radio-buttons" widget_class "*<GtkToggleButton>.<GtkLabel>*" style "theme-button" widget_class "*<GtkCheckButton>.<GtkLabel>*" style "theme-button-check-radio-label" widget_class "*<GtkRadioButton>.<GtkLabel>*" style "theme-button-check-radio-label" widget_class "*<GtkTextView>" style "theme-textview" widget_class "*<GtkList>" style "theme-textview" widget_class "*<GtkCList>" style "theme-clist" widget_class "*<GtkIconView>" style "theme-iconview" widget_class "*<GtkHandleBox>" style "theme-handlebox" widget_class "*<GtkNotebook>" style "theme-notebook" widget_class "*<GtkNotebook>*<GtkEventBox>" style "theme-notebook" widget_class "*<GtkNotebook>*<GtkDrawingArea>" style "theme-notebook" widget_class "*<GtkNotebook>*<GtkLayout>" style "theme-notebook" widget_class "*<GtkNotebook>*<GtkViewport>" style "theme-notebook" widget_class "*<GtkNotebook>.<GtkLabel>*" style "theme-notebook" #for tabs # Combo Box Stuff widget_class "*<GtkCombo>*" style "theme-combo" widget_class "*<GtkComboBox>*<GtkButton>" style "theme-combo-box" widget_class "*<GtkComboBoxEntry>*" style "theme-entry-combo-box" widget_class "*<GtkSpinButton>*" style "theme-spin-button" widget_class "*<GtkSpinButton>*<GtkArrow>*" style:highest "theme-tree-arrow" # Tool Tips Stuff widget "gtk-tooltip*" style "theme-tooltips" # Tree View Stuff widget_class "*<GtkTreeView>.<GtkButton>*" style "theme-tree" widget_class "*<GtkCTree>.<GtkButton>*" style "theme-tree" widget_class "*<GtkList>.<GtkButton>*" style "theme-tree" widget_class "*<GtkCList>.<GtkButton>*" style "theme-tree" # For arrow bg widget_class "*<GtkTreeView>.<GtkButton>*<GtkArrow>" style "theme-tree-arrow" widget_class "*<GtkCTree>.<GtkButton>*<GtkArrow>" style "theme-tree-arrow" widget_class "*<GtkList>.<GtkButton>*<GtkArrow>" style "theme-tree-arrow" ####################################################### ## GNOME specific ####################################################### widget_class "*.ETree.ECanvas" style "theme-tree" widget_class "*.ETable.ECanvas" style "theme-tree" style "panelbuttons" = "theme-button" { # As buttons are draw lower this helps center text xthickness = 3 ythickness = 3 } widget_class "*Panel*<GtkButton>*" style "panelbuttons" style "murrine-fg-is-text-color-workaround" { text[NORMAL] = "#000000" text[ACTIVE] = "#fdff00" text[SELECTED] = "#fdff00" text[INSENSITIVE] = "#757575" bg[SELECTED] = "#b85e03" bg[ACTIVE] = "#b85e03" bg[SELECTED] = "#b85e03" fg[SELECTED] = "#ffffff" fg[NORMAL] = "#ffffff" fg[ACTIVE] = "#ffffff" fg[INSENSITIVE] = "#434348" fg[PRELIGHT] = "#ffffff" base[SELECTED] = "#ff9a00" base[NORMAL] = "#ffffff" base[ACTIVE] = "#ff9a00" base[INSENSITIVE] = "#434348" base[PRELIGHT] = "#ffffff" } widget_class "*.<GtkTreeView>*" style "murrine-fg-is-text-color-workaround" style "murrine-combobox-text-color-workaround" { text[NORMAL] = "#FFFFF" text[PRELIGHT] = "#FFFFF" text[SELECTED] = "#FFFFF" text[ACTIVE] = "#FFFFF" text[INSENSITIVE] = "#FFFFF" } widget_class "*.<GtkComboBox>.<GtkCellView>" style "murrine-combobox-text-color-workaround" style "murrine-menuitem-text-is-fg-color-workaround" { bg[NORMAL] = "#0000ff" text[NORMAL] = "#ffffff" text[PRELIGHT] = "#ffffff"#"#FD7D00" text[SELECTED] = "#ffffff"#"#ff0000"# @selected_fg_color text[ACTIVE] = "#ffffff"#"#ff0000"# "#FD7D00" text[INSENSITIVE] = "#ffffff"#ff0000"# "#414143" } widget "*.gtk-combobox-popup-menu.*" style "murrine-menuitem-text-is-fg-color-workaround"

    Read the article

  • IIS Messing on Wordpress Permalinks or WP's fault?

    - by Jesus Rodriguez
    Hello, I had a problem and after some research I discovered the exactly point where is failing. blog.domain.com Is not working, it says that the page cannot be found (404) blog.domain.com/index.php Working as expected If you click on Home, it will says that the page cannot be found, if you try to preview a new post, it says that the page cannot be found... I can see every post btw. I run my blog on a Windows hosting using IIS. my permalink is this: /index.php/%postname% IIRC I had to use index.php because my IIS doesn't have URL rewriting. I have no problem with the index.php thing on the url, I have now a good SEO and I don't want to change my permalink but I Don't know why is not working now... just from one day to the next... It's a problem of WP or is just my host messing up? If is my blog, do you know what is causing this? (Just for create a concrete ticket about the exactly problem) Thank you.

    Read the article

  • How to add URL's to wiki (MediaWiki) powered documentation?

    - by Ian Boyd
    We have an internal company wiki. The wiki engine being used is MediaWiki, the wiki engine that runs Wikipedia. Some of it contains IT stuff. One of the things i want want to have are hyperlinks to the various virtual machines. An example of a command, as it needs to run, is: vmrc://solo.avatopia.com:5901/Windows 2000 Server My first thought was to convert the URL into a link: [vmrc://solo.avatopia.com:5901/Windows 2000 Server] But the content renders literally as above: with the square brackets and all. Testing with other URL protocols: [http://solo.avatopia.com] [ftp://solo.avatopia.com] [ldap://solo.avatopia.com] [vmrc://solo.avatopia.com] Only the first two work, and are converted to hyperlinks. The other two remain as liternal text. How can i add URLs to MediaWiki powered documentation? Original Question We have an internal company wiki. The wiki engine being used is MediaWiki, the wiki engine that runs Wikipedia. Some of it contains IT stuff. One of the things i want want to have are hyperlinks to the various virtual machines. An example of a command, as it needs to run, is: \\solo\VMRC Client\vmrc.exe solo.avatopia.com:5901/Windows 2000 Server If launching from a command prompt, you have to quote the spaces: C:\>"\\solo\VMRC Client\vmrc.exe" solo.avatopia.com:5901/"Windows 2000 Server" My first thought in converting the above for use on our wiki-site, is to simply HTML-ify it: file://\\solo\VMRC Client\vmrc.exe solo.avatopia.com:5901/&quot;Windows 2000 Server&quot; but MediaWiki only converts file://\solo\VMRC to a hyperlink, the remainder is text. i've tried other random things, including enclosing the URL in square brackets. What is the correct answer? i don't want to happen to randomly stumble on some format that happens to work today, and breaks in the future.

    Read the article

  • Using proxy.pac to access Apache 2 with a hostname?

    - by leeand00
    Note that I do not have a DNS on my network, and that is why I am resorting to using a proxy.pac file. I would like to be able to access my development Apache 2 server using a name instead of an ip without setting up a full blown DNS. I am aware of setting names in the C:\Windows\System32\drivers\etc\hosts file and the /etc/hosts files, however I cannot edit the hosts file on all of the devices that I am testing the site on. I've added a proxy.pac file to my Apache2 server and pointed my browsers settings to it at: http://192.168.2.221/proxyutils/proxy.pac ...where 192.168.2.221 is thehostname's ip address. I set the above URL in Firefox in the following manner: From the menubar selecting "Edit-Preferences" In the resulting "Firefox Preferences" window clicking the "Advanced" tab. Clicking the "Network" tab Clicking the "Settings" button. Selecting the "Automatic proxy configuration URL:" radio button. Entering http://192.168.2.221/proxyutils/proxy.pac and pressing OK. The contents of the proxy.pac file on the Apache server function FindProxyForURL(url, host) { if( dnsDomainIs(host, "thehostname") ) return "PROXY 192.168.2.221:80"; return "DIRECT"; } In Firefox I then access the following URL: http://thehostname/wp-blog/ And instead of the development version of the Wordpress blog I am trying to access I get a URL of http://thehostnamehttp/thehostname/wp-blog/ in my address bar and a 404 Not Found page in the browser window. Looking over proxy.pac, it seems like calling dnsDomainIs shouldn't work considering I don't have a DNS setup on my network, but I've also tried just comparing the host argument with the string "hostname" and it yielded the same result, even after modifying the proxy.pac file and clicking the reload button near the proxy settings. This could also be a Wordpress problem, since I've noticed that directories without Wordpress seem to function perfectly normally. (see cross post here) Is there any way I can modify my configuration so that I can access the site using http://thehostname/wp-blog/ ?

    Read the article

  • lighttpd with multiple IPs, each with a UCC certificate and many hostnames

    - by Dave
    I'd like to get lighttpd working with UCC certificates, but I can't seem to figure out the correct syntax. Essentially, for each IP address, I have one UCC certificate and a bunch of hostnames. $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "mywebsite.com" { server.document-root = /var/www/mywebsite.com/htdocs" } The above code works fine for one hostname, but as soon as I try to set up another hostname (note the same SSL cert): $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "anotherwebsite.com" { server.document-root = /var/www/anotherwebsite.com/htdocs" } ...I get this error: Duplicate config variable in conditional 6 global/SERVERsocket==10.0.0.1:443: ssl.engine Is there any way I can put a conditional so that only if ssl.engine is not already enabled, enable it? Or do I have to put all my $HTTP["host"]s inside the same $SERVER["socket"] (which will make config file management more difficult for me) or is there some entirely different way to do it? This has to be repeated for multiple IPs too (so I'll have a bunch of SERVER["socket"] == 10.0.0.2:443" etc), each with one UCC cert and many hostnames. Am I going about this the wrong way entirely? My goal is to conserve IP addresses when I have many websites that are related and can share an SSL certificate, but still need their own SSL-accessible version from the appropriate hostname (instead of a single secure.mywebsite.com).

    Read the article

  • SQL SERVER – Beginning SQL Server: One Step at a Time – SQL Server Magazine

    - by pinaldave
    I am glad to announce that along with SQLAuthority.com, I will be blogging on the prominent site of SQL Server Magazine. My very first blog post there is already live; read here: Beginning SQL Server: One Step at a Time. My association with SQL Server Magazine has been quite long, I have written nearly 7 to 8 SQL Server articles for the print magazine and it has been a great experience. I used to stay in the United States at that time. I moved back to India for good, and during this process, I had put everything on hold for a while. Just like many things, “temporary” things become “permanent” – coming back to SQLMag was on hold for long time. Well, this New Year, things have changed – once again, I am back with my online presence at SQLMag.com. Everybody is a beginner at every task or activity at some point of his/her life: spelling words for the first time; learning how to drive for the first time, etc. No one is perfect at the start of any task, but every human is different. As time passes, we all develop our interests and begin to study our subject of interest. Most of us dream to get a job in the area of our study – however things change as time passes. I recently read somewhere online (I could not find the link again while writing this one) that all the successful people in various areas have never studied in the area in which they are successful. After going through a formal learning process of what we love, we refuse to stop learning, and we finally stop changing career and focus areas. We move, we dare and we progress. IT field is similar to our life. New IT professionals come to this field every day. There are two types of beginners – a) those who are associated with IT field but not familiar with other technologies, and b) those who are absolutely new to the IT field. Learning a new technology is always exciting and overwhelming for enthusiasts. I am working with database (in particular) for SQL Server for more than 7 years but I am still overwhelmed with so many things to learn. I continue to learn and I do not think that I should ever stop doing so. Just like everybody, I want to be in the race and get ahead in learning the technology. For the same, I am always looking for good guidance. I always try to find a good article, blog or book chapter, which can teach me what I really want to learn at this stage in my career and can be immensely helpful. Quite often, I prefer to read the material where the author does not judge me or assume my understanding. I like to read new concepts like a child, who takes his/her first steps of learning without any prior knowledge. Keeping my personal philosophy and preference in mind, I will be blogging on SQL Server Magazine site. I will be blogging on the beginners stuff. I will be blogging for them, who really want to start and make a mark in this area. I will be blogging for all those who have an extreme passion for learning. I am happy that this is a good start for this year. One of my resolutions is to help every beginner. It is totally possible that in future they all will grow and find the same article quite ‘easy‘ – well when that happens, it indicates the success of the article and material! Well, I encourage everybody to read my SQL Server Magazine blog – I will be blogging there frequently on various topics. To begin, we will be talking about performance tuning, and I assure that I will not shy away from other multiple areas. Read my SQL Server Magazine Blog: Beginning SQL Server: One Step at a Time I think the title says it all. Do leave your comments and feedback to indicate your preference of subject and interest. I am going to continue writing on subject, and the aim is of course to help grow in this field. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Dec 5th Links: ASP.NET, ASP.NET MVC, jQuery, Silverlight, Visual Studio

    - by ScottGu
    Here is the latest in my link-listing series.  Also check out my VS 2010 and .NET 4 series for another on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET ASP.NET Code Samples Collection: J.D. Meier has a great post that provides a detailed round-up of ASP.NET code samples and tutorials from a wide variety of sources.  Lots of useful pointers. Slash your ASP.NET compile/load time without any hard work: Nice article that details a bunch of optimizations you can make to speed up ASP.NET project load and compile times. You might also want to read my previous blog post on this topic here. 10 Essential Tools for Building ASP.NET Websites: Great article by Stephen Walther on 10 great (and free) tools that enable you to more easily build great ASP.NET Websites.  Highly recommended reading. Optimize Images using the ASP.NET Sprite and Image Optimization Framework: A nice article by 4GuysFromRolla that discusses how to use the open-source ASP.NET Sprite and Image Optimization Framework (one of the tools recommended by Stephen in the previous article).  You can use this to significantly improve the load-time of your pages on the client. Formatting Dates, Times and Numbers in ASP.NET: Scott Mitchell has a great article that discusses formatting dates, times and numbers in ASP.NET.  A very useful link to bookmark.  Also check out James Michael’s DateTime is Packed with Goodies blog post for other DateTime tips. Examining ASP.NET’s Membership, Roles and Profile APIs (Part 18): Everything you could possibly want to known about ASP.NET’s built-in Membership, Roles and Profile APIs must surely be in this tutorial series. Part 18 covers how to store additional user info with Membership. ASP.NET with jQuery An Introduction to jQuery Templates: Stephen Walther has written an outstanding introduction and tutorial on the new jQuery Template plugin that the ASP.NET team has contributed to the jQuery project. Composition with jQuery Templates and jQuery Templates, Composite Rendering, and Remote Loading: Dave Ward has written two nice posts that talk about composition scenarios with jQuery Templates and some cool scenarios you can enable with them. Using jQuery and ASP.NET to Build a News Ticker: Scott Mitchell has a nice tutorial that demonstrates how to build a dynamically updated “news ticker” style UI with ASP.NET and jQuery. Checking All Checkboxes in a GridView using jQuery: Scott Mitchell has a nice post that covers how to use jQuery to enable a checkbox within a GridView’s header to automatically check/uncheck all checkboxes contained within rows of it. Using jQuery to POST Form Data to an ASP.NET AJAX Web Service: Rick Strahl has a nice post that discusses how to capture form variables and post them to an ASP.NET AJAX Web Service (.asmx). ASP.NET MVC ASP.NET MVC Diagnostics Using NuGet: Phil Haack has a nice post that demonstrates how to easily install a diagnostics page (using NuGet) that can help identify and diagnose common configuration issues within your apps. ASP.NET MVC 3 JsonValueProviderFactory: James Hughes has a nice post that discusses how to take advantage of the new JsonValueProviderFactory support built into ASP.NET MVC 3.  This makes it easy to post JSON payloads to MVC action methods. Practical jQuery Mobile with ASP.NET MVC: James Hughes has another nice post that discusses how to use the new jQuery Mobile library with ASP.NET MVC to build great mobile web applications. Credit Card Validator for ASP.NET MVC 3: Benjii Me has a nice post that demonstrates how to build a [CreditCard] validator attribute that can be used to easily validate credit card numbers are in the correct format with ASP.NET MVC. Silverlight Silverlight FireStarter Keynote and Sessions: A great blog post from John Papa that contains pointers and descriptions of all the great Silverlight content we published last week at the Silverlight FireStarter.  You can watch all of the talks online.  More details on my keynote and Silverlight 5 announcements can be found here. 31 Days of Windows Phone 7: 31 great tutorials on how to build Windows Phone 7 applications (using Silverlight).  Silverlight for Windows Phone Toolkit Update: David Anson has a nice post that discusses some of the additional controls provided with the Silverlight for Windows Phone Toolkit. Visual Studio JavaScript Editor Extensions: A nice (and free) Visual Studio plugin built by the web tools team that significantly improves the JavaScript intellisense support within Visual Studio. HTML5 Intellisense for Visual Studio: Gil has a blog post that discusses a new extension my team has posted to the Visual Studio Extension Gallery that adds HTML5 schema support to Visual Studio 2008 and 2010. Team Build + Web Deployment + Web Deploy + VS 2010 = Goodness: Visual blogs about how to enable a continuous deployment system with VS 2010, TFS 2010 and the Microsoft Web Deploy framework.  Visual Studio 2010 Emacs Emulation Extension and VIM Emulation Extension: Check out these two extensions if you are fond of Emacs and VIM key bindings and want to enable them within Visual Studio 2010. Hope this helps, Scott

    Read the article

  • Developer’s Life – Summary of Superhero Articles

    - by Pinal Dave
    Earlier this year, I wrote an article series where I talked about developer’s life and compared it with Superhero. I have got amazing response to this series and I have been receiving quite a lots of email suggesting that I should write more blog post about them. Currently I am not planning to write more blog post but I will soon continue another series. In this blog post, I have summarized the entire series. Let me know if you want me to write about any superhero. I will see what I can do about that hero. Developer’s Life – Every Developer is a Captain America Captain America was first created as a comic book character in the 1940’s as a way to boost morale during World War II.  Aimed at a children’s audience, his legacy faded away when the war ended.  However, he has recently has a major reboot to become a popular movie character that deals with modern issues. Developer’s Life – Every Developer is the Incredible Hulk The Incredible Hulk is possibly one of the scariest superheroes out there.  All superheroes are meant to be “out of this world” and awe-inspiring, but I think most people will agree with I say The Hulk takes this to the next level.  He is the result of an industrial accident, which is scary enough in it’s own right.  Plus, when mild-mannered Bruce Banner is angered, he goes completely out-of-control and transforms into a destructive monster that he cannot control and has no memories of. Developer’s Life – Every Developer is a Wonder Woman We have focused a lot lately on this “superhero series.”  I love fantasy books and movies, and I feel like there is a lot to be learned from them.  As I am writing this series, though, I have noticed that every super hero I write about is a man.  So today, I would like to talk about the major female super hero – Wonder Woman. Developer’s Life – Every Developer is a Harry Potter Harry Potter might not be a superhero in the traditional sense, but I believe he still has a lot to teach us and show us about life as a developer.  If you have been living under a rock for the last 17 years, you might not know that Harry Potter is the main character in an extremely popular series of books and movies documenting the education and tribulation of a young wizard (and his friends). Developer’s Life – Every Developer is Like Transformers Transformers may not be superheroes – they don’t wear capes, they don’t have amazing powers outside of their size and folding ability, they’re not even human (technically).  Part of their enduring popularity is that while we are enjoying over-the-top movies, we are learning about good leadership and strong personal skills. Developer’s Life – Every Developer is a Iron Man Iron Man is another superhero who is not naturally “super,” but relies on his brain (and money) to turn him into a fighting machine.  While traditional superheroes are still popular, a three-movie franchise and incorporation into the new Avengers series shows that Iron Man is popular enough on his own. Developer’s Life – Every Developer is a Sherlock Holmes I have been thinking a lot about how developers are like super heroes, and I have written two blog posts now comparing them to Spiderman and Superman.  I have a lot of love and respect for developers, and I hope that they are enjoying these articles, and others are learning a little bit about the profession.  There is another fictional character who, while not technically asuper hero, is very powerful, and I also think stands as a good example of a developer. That character is Sherlock Holmes.  Sherlock Holmes is a British detective, first made popular at the turn of the 19thcentury by author Sir Arthur Conan Doyle.  The original Sherlock Holmes was a brilliant detective who could solve the most mind-boggling crime through simple observations and deduction. Developer’s Life – Every Developer is a Chhota Bheem Chhota Bheem is a cartoon character that is extremely popular where I live.  He is my daughter’s favorite characters.  I like to say that children love Chhota Bheem more than their parents – it is lucky for us he is not real!  Children love Chhota Bheem because he is the absolute “good guy.”  He is smart, loyal, and strong.  He and his friends live in Dholakpur and fight off their many enemies – and always win – in every episode.  In each episode, they learn something about friendship, bravery, and being kind to others.  Chhota Bheem is a good role model for children, and I think that he is a good role model for developers are well. Developer’s Life – Every Developer is a Batman Batman is one of the darkest superheroes in the fantasy canon.  He does not come to his powers through any sort of magical coincidence or radioactive insect, but through a lot of psychological scarring caused by witnessing the death of his parents.  Despite his dark back story, he possesses a lot of admirable abilities that I feel bear comparison to developers. Developer’s Life – Every Developer is a Superman I enjoyed comparing developers to Spiderman so much, that I have decided to continue the trend and encourage some of my favorite people (developers) with another favorite superhero – Superman.  Superman is probably the most famous superhero – and one of the most inspiring. Developer’s Life – Every Developer is a Spiderman I have to admit, Spiderman is my favorite superhero.  The most recent movie recently was released in theaters, so it has been at the front of my mind for some time. Spiderman was my favorite superhero even before the latest movie came out, but of course I took my whole family to see the movie as soon as I could!  Every one of us loved it, including my daughter.  We all left the movie thinking how great it would be to be Spiderman.  So, with that in mind, I started thinking about how we are like Spiderman in our everyday lives, especially developers. I would like to know which Superhero is your favorite hero! Reference: Pinal Dave (http://blog.SQLAuthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Developer, Superhero

    Read the article

  • WPF ListView as a DataGrid – Part 3

    - by psheriff
    I have had a lot of great feedback on the blog post about turning the ListView into a DataGrid by creating GridViewColumn objects on the fly. So, in the last 2 parts, I showed a couple of different methods for accomplishing this. Let’s now look at one more and that is use Reflection to extract the properties from a Product, Customer, or Employee object to create the columns. Yes, Reflection is a slower approach, but you could create the columns one time then cache the View object for re-use. Another potential drawback is you may have columns in your object that you do not wish to display on your ListView. But, just because so many people asked, here is how to accomplish this using Reflection.   Figure 1: Use Reflection to create GridViewColumns. Using Reflection to gather property names is actually quite simple. First you need to pass any type (Product, Customer, Employee, etc.) to a method like I did in my last two blog posts on this subject. Below is the method that I created in the WPFListViewCommon class that now uses reflection. C#public static GridView CreateGridViewColumns(Type anyType){  // Create the GridView  GridView gv = new GridView();  GridViewColumn gvc;   // Get the public properties.  PropertyInfo[] propInfo =          anyType.GetProperties(BindingFlags.Public |                                BindingFlags.Instance);   foreach (PropertyInfo item in propInfo)  {    gvc = new GridViewColumn();    gvc.DisplayMemberBinding = new Binding(item.Name);    gvc.Header = item.Name;    gvc.Width = Double.NaN;    gv.Columns.Add(gvc);  }   return gv;} VB.NETPublic Shared Function CreateGridViewColumns( _  ByVal anyType As Type) As GridView  ' Create the GridView   Dim gv As New GridView()  Dim gvc As GridViewColumn   ' Get the public properties.   Dim propInfo As PropertyInfo() = _    anyType.GetProperties(BindingFlags.Public Or _                          BindingFlags.Instance)   For Each item As PropertyInfo In propInfo    gvc = New GridViewColumn()    gvc.DisplayMemberBinding = New Binding(item.Name)    gvc.Header = item.Name    gvc.Width = [Double].NaN    gv.Columns.Add(gvc)  Next   Return gvEnd Function The key to using Relection is using the GetProperties method on the type you pass in. When you pass in a Product object as Type, you can now use the GetProperties method and specify, via flags, which properties you wish to return. In the code that I wrote, I am just retrieving the Public properties and only those that are Instance properties. I do not want any static/Shared properties or private properties. GetProperties returns an array of PropertyInfo objects. You can loop through this array and build your GridViewColumn objects by reading the Name property from the PropertyInfo object. Build the Product Screen To populate the ListView shown in Figure 1, you might write code like the following: C#private void CollectionSample(){  Product prod = new Product();   // Setup the GridView Columns  lstData.View =      WPFListViewCommon.CreateGridViewColumns(typeOf(Product));  lstData.DataContext = prod.GetProducts();} VB.NETPrivate Sub CollectionSample()  Dim prod As New Product()   ' Setup the GridView Columns  lstData.View = WPFListViewCommon.CreateGridViewColumns( _       GetType(Product))  lstData.DataContext = prod.GetProducts()End Sub All you need to do now is to pass in a Type object from your Product class that you can get by using the typeOf() function in C# or the GetType() function in VB. That’s all there is to it! Summary There are so many different ways to approach the same problem in programming. That is what makes programming so much fun! In this blog post I showed you how to create ListView columns on the fly using Reflection. This gives you a lot of flexibility without having to write extra code as was done previously. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "WPF ListView as a DataGrid – Part 3" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".  

    Read the article

  • Developer Training – Various Options for Maximum Benefit – Part 4

    - by pinaldave
    Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 If you have been reading this series, by now you are aware of all the pros and cons that can come along with training.  We’ve asked and answered hard questions, and investigated them “whys” and “hows” of training.  Now it is time to talk about all the different kinds of training that are out there! On Job Training The most common type of training is on the job training.  Everyone receives this kind of education – even experts who come in to consult have to be taught where the printer, pens, and copy machines are.  If you are thinking about more concrete topics, though, on the job training can be some of the easiest to come across.  Picture this: someone in the company whom you really admire is hard at work on a project.  You come up to them and ask to help them out – if they are a busy developer, the odds are that they will say “yes, please!”   If you phrase your question as an offer of help, you can receive training without ever putting someone in the awkward position of acting as a mentor.  However, some people may want the task of being a mentor.  It can never hurt to ask.  Most people will be more than willing to pass their knowledge along. Extreme Programming If your company and coworkers are willing, you can even investigate Extreme Programming.  This is a type of programming that allows small teams to quickly develop code and products that are released with almost immediate user feedback.  You can find more information at http://www.extremeprogramming.org/.  If this is something your company could use, suggest it to your supervisor.  Even if they say no, it will make it clear that you are a go-getter who is interested in new and exciting projects.  If the answer is yes, then you have the opportunity to get some of the best on the job training around. In Person Training Click on Image to Enlarge When you say the word “training,” most people’s minds go back to the classroom, an image they are familiar with.  While training doesn’t always have to be in a traditional setting, because it is so familiar it can also be the most valuable type of training.  There are many ways to get training through a live instructor.  Some companies may be willing to send a representative to you, where employees will get training, sometimes food and coffee, and a live instructor who can answer questions immediately.  Sometimes these trainers are also able to do consultations at the same time, which can invaluable to a company.  If you are the one to asks your supervisor for a training session that can also be turned into a consultation, you may stick in their minds as an incredibly dedicated employee.  If you can’t find a representative, local colleges can also be a good resource for free or cheap classes – or they may have representatives coming who are willing to take on a few more students. Benefits of On Demand Developer Training Of course, you can often get the best of all these types of training with online or On Demand training.  You can get the benefit of a live instructor who is willing to answer questions (although in this case, usually through e-mail or other online venues), there are often real-world examples to follow along – like on the job training – and best of all you can learn whenever you have the time or need.  Did a problem with your server come up at midnight when all your supervisors are safe at home and probably in bed?  No problem!  On Demand training is especially useful if you need to slow down, pause, or rewind a training session.  Not even a real-life instructor can do that! When I was writing this blog post, I felt that each of the subject, which I have covered can be blog posts of itself. However, I wanted to keep the the blog post concise and so touch based on three major training aspects 1) On Job Training 2) In Person Training and 3) Online training. Here is the question for you – is there any other kind of training methods available, which are effective and one should consider it? If yes, what are those, I may write a follow up blog post on the same subject next week. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Updating the managed debugging API for .NET v4

    - by Brian Donahue
    In any successful investigation, the right tools play a big part in collecting evidence about the state of the "crime scene" as it was before the detectives arrived. Unfortunately for the Crash Scene Investigator, we don't have the budget to fly out to the customer's site, chalk the outline, and eat their doughnuts. We have to rely on the end-user to collect the evidence for us, which means giving them the fingerprint dust and the evidence baggies and leaving them to it. With that in mind, the Red Gate support team have been writing tools that can collect vital clues with a minimum of fuss. Years ago we would have asked for a memory dump, where we used to get the customer to run CDB.exe and produce dumps that we could analyze in-house, but those dumps were pretty unwieldy (500MB files) and the debugger often didn't dump exactly where we wanted, or made five or more dumps. What we wanted was just the minimum state information from the program at the time of failure, so we produced a managed debugger that captured every first and second-chance exception and logged the stack and a minimal amount of variables from the memory of the application, which could all be exported as XML. This caused less inconvenience to the end-user because it is much easier to send a 65KB XML file in an email than a 500MB file containing all of the application's memory. We don't need to have the entire victim shipped out to us when we just want to know what was under the fingernails. The thing that made creating a managed debugging tool possible was the MDbg Engine example written by Microsoft as part of the Debugging Tools for Windows distribution. Since the ICorDebug interface is a bit difficult to understand, they had kindly created some wrappers that provided an event-driven debugging model that was perfect for our needs, but .NET 4 applications under debugging started complaining that "The debugger's protocol is incompatible with the debuggee". The introduction of .NET Framework v4 had changed the managed debugging API significantly, however, without an update for the MDbg Engine code! After a few hours of research, I had finally worked out that most of the version 4 ICorDebug interface still works much the same way in "legacy" v2 mode and there was a relatively easy fix for the problem in that you can still get a reference to legacy ICorDebug by changing the way the interface is created. In .NET v2, the interface was acquired using the CreateDebuggingInterfaceFromVersion method in mscoree.dll. In v4, you must first create IClrMetaHost, enumerate the runtimes, get an ICLRRuntimeInfo interface to the .NET 4 runtime from that, and use the GetInterface method in mscoree.dll to return a "legacy" ICorDebug interface. The rest of the MDbg Engine will continue working the old way. Here is how I had changed the MDbg Engine code to support .NET v4: private void InitFromVersion(string debuggerVersion){if( debuggerVersion.StartsWith("v1") ){throw new ArgumentException( "Can't debug a version 1 CLR process (\"" + debuggerVersion + "\"). Run application in a version 2 CLR, or use a version 1 debugger instead." );} ICorDebug rawDebuggingAPI=null;if (debuggerVersion.StartsWith("v4")){Guid CLSID_MetaHost = new Guid("9280188D-0E8E-4867-B30C-7FA83884E8DE"); Guid IID_MetaHost = new Guid("D332DB9E-B9B3-4125-8207-A14884F53216"); ICLRMetaHost metahost = (ICLRMetaHost)NativeMethods.ClrCreateInterface(CLSID_MetaHost, IID_MetaHost); IEnumUnknown runtimes = metahost.EnumerateInstalledRuntimes(); ICLRRuntimeInfo runtime = GetRuntime(runtimes, debuggerVersion); //Defined in metahost.hGuid CLSID_CLRDebuggingLegacy = new Guid(0xDF8395B5, 0xA4BA, 0x450b, 0xA7, 0x7C, 0xA9, 0xA4, 0x77, 0x62, 0xC5, 0x20);Guid IID_ICorDebug = new Guid("3D6F5F61-7538-11D3-8D5B-00104B35E7EF"); Object res;runtime.GetInterface(ref CLSID_CLRDebuggingLegacy, ref IID_ICorDebug, out res); rawDebuggingAPI = (ICorDebug)res; }elserawDebuggingAPI = NativeMethods.CreateDebuggingInterfaceFromVersion((int)CorDebuggerVersion.Whidbey,debuggerVersion);if (rawDebuggingAPI != null)InitFromICorDebug(rawDebuggingAPI);elsethrow new ArgumentException("Support for debugging version " + debuggerVersion + " is not yet implemented");} The changes above will ensure that the debugger can support .NET Framework v2 and v4 applications with the same codebase, but we do compile two different applications: one targeting v2 and the other v4. As a footnote I need to add that some missing native methods and wrappers, along with the EnumerateRuntimes method code, came from the Mindbg project on Codeplex. Another change is that when using the MDbgEngine.CreateProcess to launch a process in the debugger, do not supply a null as the final argument. This does not work any more because GetCORVersion always returns "v2.0.50727" as the function has been deprecated in .NET v4. What's worse is that on a system with only .NET 4, the user will be prompted to download and install .NET v2! Not nice! This works much better: proc = m_Debugger.CreateProcess(ProcessName, ProcessArgs, DebugModeFlag.Default,String.Format("v{0}.{1}.{2}",System.Environment.Version.Major,System.Environment.Version.Minor,System.Environment.Version.Build)); Microsoft "unofficially" plan on updating the MDbg samples soon, but if you have an MDbg-based application, you can get it working right now by changing one method a bit and adding a few new interfaces (ICLRMetaHost, IEnumUnknown, and ICLRRuntimeInfo). The new, non-legacy implementation of MDbg Engine will add new, interesting features like dump-file support and by association I assume garbage-collection/managed object stats, so it will be well worth looking into if you want to extend the functionality of a managed debugger going forward.

    Read the article

  • SQL SERVER – Service Broker and CAP_CPU_PERCENT – Limiting SQL Server Instances to CPU Usage

    - by pinaldave
    I have mentioned several times on this blog that the best part of blogging is the questions I receive from readers. They are often very interesting. The questions from readers give me a good idea what other readers might be thinking as well. After reading my earlier article Simple Example to Configure Resource Governor – Introduction to Resource Governor – I received an email from a reader and we exchanged a few emails. After exchanging emails we both figured out what is going on. It was indeed interesting and reader suggested to that I should blog about it.  I asked for permission to publish his name but he does not like the attention so we will just call him Jeff. I have converted our emails into chat for easy consumption. Jeff: Your script does not work at all. I think either there is a bug in SQL Server. Pinal: Would you please explain in detail? Jeff: Your code does not limit the CPU usage? Pinal: How did you measure it? Jeff: Well, we have third party tools for it but let us say I have limited the resources for Reporting Services and used your script described in your blog. After that I ran only reporting service workload the CPU is still used more than 100% and it is not limited to 30% as described in your script. Clearly something is wrong somewhere. Pinal: Did you say you ONLY ran reporting server load? Jeff: Yeah, to validate I ran ONLY reporting server load and CPU did not throttle at 30% as per your script. Pinal: Oh! I get it here is the answer - CAP_CPU_PERCENT = 30. Use it. Jeff: What is that, I think your earlier script says it will throttle the Reporting Service workload and Application/OLTP workload and balance it. Pinal: Exactly, that is correct. Jeff: You need to write more in email buddy! Just like your blogs, your answers do not make sense! No Offense! Pinal: Hmm…feedback well taken. Let me try again. In SQL Server 2012 there are a few enhancements with regards to SQL Server Resource Governor. One of the enhancement is how the resources are allocated. Let me explain you with examples. Configuration: [Read Earlier Post] Reporting Workload: MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30 Application/OLTP Workload: MIN_CPU_PERCENT=50, MAX_CPU_PERCENT=100 Example 1: If there is only Reporting Workload on the server: SQL Server will not limit usage of CPU to only 30% workload but SQL Server instance will use all available CPU (if needed). In another word in this scenario it will use more than 30% CPU. Example 2: If there is Reproting Workload and heavy Application/OLTP workload: SQL Server will allocate a maximum of 30% CPU resources to Reporting Workload and allocate remaining resources to heavy application/OLTP workload. The reason for this enhancement is for better utilization of the resources. Let us think, if there is only single workload, which we have limited to max CPU usage to 30%. The other unused available CPU resources is now wasted. In this situation SQL Server allows the workload to use more than 30% resources leading to overall improved/optimized performance. However, in the case of multiple workload where lots of resources are needed the limits specified in MAX_CPU_PERCENT are acknowledged. Example 3: If there is a situation where the max CPU workload has to be enforced: This is a very interesting scenario, in the case when the max CPU workload has to be enforced irrespective of the workload and enhanced algorithm, the keyword CAP_CPU_PERCENT is essential. It specifies a hard cap on the CPU bandwidth that all requests in the resource pool will receive. It will never let CPU usage for reporting workload to go over 30% in our case. You can use the key word as follows: -- Creating Resource Pool for Report Server CREATE RESOURCE POOL ReportServerPool WITH ( MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30, CAP_CPU_PERCENT=40, MIN_MEMORY_PERCENT=0, MAX_MEMORY_PERCENT=30) GO Notice that there is MAX_CPU_PERCENT=30 and CAP_CPU_PERCENT=40, what it means is that when SQL Server Instance is under heavy load under different workload it will use the maximum CPU at 30%. However, when the SQL Server instance is not under workload it will go over the 30% limit. However, as CAP_CPU_PERCENT is set to 40, it will not go over 40% in any case by limiting the usage of CPU. CAP_CPU_PERCENT puts a hard limit on the resources usage by workload. Jeff: Nice Pinal, you should blog about it. [A day passes by] Pinal: Jeff, it is done! Click here to read it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Service Broker

    Read the article

  • Workaround for datadude deployment bug - NullReferenceException

    - by jamiet
    I have come across a bug in Visual Studio 2010 Database Projects (aka datadude aka DPro aka Visual Studio Database Development Tools aka Visual Studio Team Edition for Database Professionals aka Juneau aka SQL Server Data Tools) that other people may encounter so, for the purposes of googling, I'm writing this blog post about it. Through my own googling I discovered that a Connect bug had already been raised about it (VS2010 Database project deploy - “SqlDeployTask” task failed unexpectedly, NullReferenceException), and coincidentally enough it was raised by my former colleague Tom Hunter (whom I have mentioned here before as the superhuman Tom Hunter) although it has not (at this time) received a reply from Microsoft. Tom provided a repro, namely that this syntactically valid function definition: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN (    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte) would produce this nasty unhelpful error upon deployment: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\TeamData\Microsoft.Data.Schema.TSqlTasks.targets(120,5): Error MSB4018: The "SqlDeployTask" task failed unexpectedly.System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.VariableSubstitution(SqlScriptProperty propertyValue, IDictionary`2 variables, Boolean& isChanged)   at Microsoft.Data.Schema.Sql.SchemaModel.SqlModelComparerBase.ArePropertiesEqual(IModelElement source, IModelElement target, ModelPropertyClass propertyClass, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareProperties(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareChildren(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareParentElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes, Boolean isComposing)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithoutCompareName(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, ModelComparisonResult result, ModelComparisonChangeDefinition changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareElementsWithSameType(IModelElement sourceElement, IModelElement targetElement, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean ignoreComparingName, Boolean parentExplicitlyIncluded, Boolean compareElementOnly, Boolean compareFromRootElement, ModelComparisonChangeDefinition& changes)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareAllElementsForOneType(ModelElementClass type, ModelComparerConfiguration configuration, ModelComparisonResult result, Boolean compareOrphanedElements)   at Microsoft.Data.Schema.SchemaModel.ModelComparer.CompareStore(ModelStore source, ModelStore target, ModelComparerConfiguration configuration)   at Microsoft.Data.Schema.Build.SchemaDeployment.CompareModels()   at Microsoft.Data.Schema.Build.SchemaDeployment.PrepareBuildPlan()   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute(Boolean executeDeployment)   at Microsoft.Data.Schema.Build.SchemaDeployment.Execute()   at Microsoft.Data.Schema.Tasks.DBDeployTask.Execute()   at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()   at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult)   Done executing task "SqlDeployTask" -- FAILED.  Done building target "DspDeploy" in project "Lloyds.UKTax.DB.UKtax.dbproj" -- FAILED. Done executing task "CallTarget" -- FAILED.Done building target "DBDeploy" in project It turns out there are a certain set of circumstances that need to be met for this error to occur: The object being deployed is an inline function  (may also exist for multistatement and scalar functions - I haven't tested that) That object includes SQLCMD variable references The object has already been deployed successfully Just to reiterate that last bullet point, the error does not occur when you deploy the function for the first time, only on the subsequent deployment.   Luckily I have a direct line into a guy on the development team so I fired off an email on Friday evening and today (Monday) I received a reply back telling me that there is a simple fix, one simply has to remove the parentheses that wrap the SQL statement. So, in the case of Tom's repro, the function definition simpy has to be changed to: CREATE FUNCTION [dbo].[Function1]()RETURNS TABLEASRETURN --(    WITH cte AS (    SELECT 1 AS [c1]    FROM [$(Database3)].[dbo].[Table1]   )   SELECT 1 AS [c1]   FROM cte--) I have commented out the offending parentheses rather than removing them just to emphasize the point. Thereafter the function will deploy fine. I tested this out on my own project this morning and can confirm that this fix does indeed work.   I have been told that the bug CAN be reproduced in the Release Candidate (RC) 0 build of SQL Server Data Tools in SQL Server 2010 so am hoping that a fix makes it in for the Release-To-Manufacturing (RTM) build. Hope this helps @jamiet

    Read the article

  • XNA Notes 004

    - by George Clingerman
    The XNA community has been crazy busy again. It always make me fee like such a slacker collecting all of these notes as I see the tremendous output from people all over the world and it’s incredible and humbling. There are some amazingly skilled people working with XNA. On another not, I’m going to take a minute to get on my soapbox and say, if you are developing ANYTHING and are not using some sort of source/revision control, START IMMEDIATELY. This applies to teams of one. Projects for fun. And “I back up my hard drive” or “I use dropbox!” does NOT count as using source control. You’ll be doing yourself a HUGE favor if you find one, learn to use it and integrate it into your everyday workflow. I personally use Subversion. It’s hosted offsite at xp.dev.com and I use TortoiseSVN as my front end to interface with the repository. It’s simple and easy to use and has saved me from myself so many time. Honestly, get setup with some type of source control immediately. If you don’t understand how, grab another developer that does and have them walk you through setup and the basics of using it. Ok, I’m done. On to the notes… The XNA Team Only 14 days left to Submit XNA GS 3.1 Games! http://blogs.msdn.com/b/xna/archive/2011/01/24/14-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx Shawn Hargreaves shares some great information on Exception Handling best practices on the XNA forums http://forums.create.msdn.com/forums/p/73333/448556.aspx#448556 http://blogs.msdn.com/b/ericlippert/archive/2008/09/10/vexing-exceptions.aspx XNA MVPs @CatalinZima gives us a peek at Chicken’s Can’t Fly http://www.amusedsloth.com/games/chickens-cant-fly/ Screen-space deformations in XNA for WP7 from Catalin Zima http://twitter.com/CatalinZima/statuses/30313083767357440 http://www.amusedsloth.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ XNA Developers Going to GDC? Don’t miss the XNA panel hosted by a plethora of well known XNA community names! http://forums.create.msdn.com/forums/p/73576/448842.aspx#448842 MasterBlud does an interview with @Xalterax http://twitter.com/MasterBlud/statuses/28510774812999680 http://www.xboxhornet.com/wordpress/?p=7102 Luke Schneider of Radiangames posts about The Radiangames Style http://radiangames.com/?p=532 Holmade Games had a “vote for the new playable character” poll going on for Hurdle Turtle this past week http://holmadegames.blogspot.com/2011/01/new-level-pack-vote-for-your-favorite.html IGF v0.1.0.0 release post mortem http://indiefreaks.com/2011/01/24/v0-1-0-0-release-post-mortem/ James an Super Dunner post Good Morning Gato #46 and a look at the Vampire Smile box art http://www.ska-studios.com/2011/01/21/good-morning-gato-46/ http://www.ska-studios.com/2011/01/20/vampire-smiles-digital-box-art/ Alfredo Di Napoli creates Cow Pong using XNA and F#! http://alfredodinapoli.wordpress.com/2011/01/25/cow-pong-a-simple-xna-game-in-f/ Xbox LIVE Indie Games Signed In Podcast posts Episode #61 http://www.signedinpodcast.com/?p=559 Gamergeddon posts the January 23rd edition of XBLIG Round Up http://www.gamergeddon.com/2011/01/23/xbox-indie-games-round-up-january-23rd/ Indie Asylum posts Antipole Review http://www.indieasylum.com/reviews/38-xblig/112-antipole.html 1UPOrPosion Reviews OSR Unhinged http://www.1uporpoison.com/xblig/osr-unhinged/ DarkstarMatryx review Warbirds at Work http://www.darkstarmatryx.com/?p=185 Review of Aban Hawkins and the 1000 Spikes http://www.armlessoctopus.com/2011/01/24/xbox-indie-review-aban-hawkins-the-1000-spikes/ XboxHornet reviews Corrupted http://www.xboxhornet.com/wordpress/?p=7123 XBLIG 2010: The Best And The Worst http://www.gamasutra.com/blogs/JamieMann/20110121/6840/ Xbox LIVE Arcade Sales Analysis - an interesting read for XBLIG developers wondering how they’re doing compared to arcade.. http://www.gamerbytes.com/2011/01/xbla_sales_analysis_dec_2010.php Best of Indies for January 25th http://www.thisisfakediy.co.uk/articles/games/best-of-the-indies-25th-january-2011 Decimation X3 appears as an arcade machine in the wild! http://twitter.com/mdoucette/statuses/29605562484260864 XNA Game Development Guiseppe De Francesco (@PinoEire) announced Torque X 4.0 CEV is now in RC phase! http://www.garagegames.com/community/blogs/view/20779 DrMistry of mstargames shares his struggle (and mistakes) with learning to use the Content Pipeline http://www.mstargames.co.uk/mistryblogmain/35-genblog/181-pontent-cipeline-more-like-it.html New Tutorial posted XNA 2D Basic Collision Detection with Rotation from Ioannis Panagopoulos http://www.progware.org/Blog/post/XNA-2D-Basic-Collision-Detection-with-Rotation.aspx Sgt. Conker roars to life! Doing a much better (and prettier) job of collecting XNA news from around the interwebs. http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/dedication-for-captain-boki/ http://www.sgtconker.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ http://www.sgtconker.com/2011/01/xna-4-0-light-pre-pass-2/ http://www.sgtconker.com/2011/01/indiefreaks-game-framework-0-1-0-0-released/ Offering a little free publicity for XBLIGs http://forums.create.msdn.com/forums/p/73465/448321.aspx#448321 Ben Kane writes about building loot tables from Excel using the Content Pipeline http://benkane.wordpress.com/2011/01/23/building-loot-tables-from-excel-using-the-content-pipeline/ Good tips on attracting a game artist AND an offer to create your cover art for FREE http://forums.create.msdn.com/forums/t/72998.aspx If you’re an XBLIG developer keeping your eye on places to release on the PC, might want to be watching the IndieCity blog. Seems like these guys are well on their way to constructing something worth watching. http://www.indiecity.com/blog/ DVMGames spotted a new crowd-funding site for Indies http://twitter.com/DVMGames/statuses/29947274767372289 http://www.8bitfunding.com/ Transmute continues to make progress and there’s a nice dev blog to follow along here http://forgottenstarstudios.com/blog/

    Read the article

  • Replication Services in a BI environment

    - by jorg
    In this blog post I will explain the principles of SQL Server Replication Services without too much detail and I will take a look on the BI capabilities that Replication Services could offer in my opinion. SQL Server Replication Services provides tools to copy and distribute database objects from one database system to another and maintain consistency afterwards. These tools basically copy or synchronize data with little or no transformations, they do not offer capabilities to transform data or apply business rules, like ETL tools do. The only “transformations” Replication Services offers is to filter records or columns out of your data set. You can achieve this by selecting the desired columns of a table and/or by using WHERE statements like this: SELECT <published_columns> FROM [Table] WHERE [DateTime] >= getdate() - 60 There are three types of replication: Transactional Replication This type replicates data on a transactional level. The Log Reader Agent reads directly on the transaction log of the source database (Publisher) and clones the transactions to the Distribution Database (Distributor), this database acts as a queue for the destination database (Subscriber). Next, the Distribution Agent moves the cloned transactions that are stored in the Distribution Database to the Subscriber. The Distribution Agent can either run at scheduled intervals or continuously which offers near real-time replication of data! So for example when a user executes an UPDATE statement on one or multiple records in the publisher database, this transaction (not the data itself) is copied to the distribution database and is then also executed on the subscriber. When the Distribution Agent is set to run continuously this process runs all the time and transactions on the publisher are replicated in small batches (near real-time), when it runs on scheduled intervals it executes larger batches of transactions, but the idea is the same. Snapshot Replication This type of replication makes an initial copy of database objects that need to be replicated, this includes the schemas and the data itself. All types of replication must start with a snapshot of the database objects from the Publisher to initialize the Subscriber. Transactional replication need an initial snapshot of the replicated publisher tables/objects to run its cloned transactions on and maintain consistency. The Snapshot Agent copies the schemas of the tables that will be replicated to files that will be stored in the Snapshot Folder which is a normal folder on the file system. When all the schemas are ready, the data itself will be copied from the Publisher to the snapshot folder. The snapshot is generated as a set of bulk copy program (BCP) files. Next, the Distribution Agent moves the snapshot to the Subscriber, if necessary it applies schema changes first and copies the data itself afterwards. The application of schema changes to the Subscriber is a nice feature, when you change the schema of the Publisher with, for example, an ALTER TABLE statement, that change is propagated by default to the Subscriber(s). Merge Replication Merge replication is typically used in server-to-client environments, for example when subscribers need to receive data, make changes offline, and later synchronize changes with the Publisher and other Subscribers, like with mobile devices that need to synchronize one in a while. Because I don’t really see BI capabilities here, I will not explain this type of replication any further. Replication Services in a BI environment Transactional Replication can be very useful in BI environments. In my opinion you never want to see users to run custom (SSRS) reports or PowerPivot solutions directly on your production database, it can slow down the system and can cause deadlocks in the database which can cause errors. Transactional Replication can offer a read-only, near real-time database for reporting purposes with minimal overhead on the source system. Snapshot Replication can also be useful in BI environments, if you don’t need a near real-time copy of the database, you can choose to use this form of replication. Next to an alternative for Transactional Replication it can be used to stage data so it can be transformed and moved into the data warehousing environment afterwards. In many solutions I have seen developers create multiple SSIS packages that simply copies data from one or more source systems to a staging database that figures as source for the ETL process. The creation of these packages takes a lot of (boring) time, while Replication Services can do the same in minutes. It is possible to filter out columns and/or records and it can even apply schema changes automatically so I think it offers enough features here. I don’t know how the performance will be and if it really works as good for this purpose as I expect, but I want to try this out soon!

    Read the article

  • SQL Saturday #44 Huntington Beach Recap

    What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach.  It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location.  I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis).  It made me think about this: Price of all those cars: $ 150,000+.  Impacting the ability of people to learn: Priceless.  We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well.  That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >