Search Results

Search found 16808 results on 673 pages for 'computer guru'.

Page 211/673 | < Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >

• Why does my general frame rate slow down to 40fps randomly?

  - by Joshua

  This has been bugging me for a while. Every once in a while, I find my computer to be sort of laggy and I thought it was because it was busy or something. However, I recently noticed that it wasn't any performance issue...I thought my computer was laggy because the frame rate slowed from 75fps right down to ~40 fps and caused very visible tearing. This is not rare. It happens many, many times a day. I have no idea what is happening...I have an AMD 5670 on Windows 7 32-bit by the way, and I've heard bad things about AMD's driver support. Could this be the problem? P.S. The frame rate slowdown is not just for games (I rarely play games, and have not played games in the time since I noticed this problem), it seems it's an issue for the entirety of Windows. I first noticed the tearing when I was moving around tabs in Google Chrome.

  Read the article

• Cannot fix induced 0x7b error on XP

  - by Malfist

  I'm writing a tool that will automagically fix the STOP 0x7B error that occurs when windows cannot access the hard drive due to driver issues (usually). I've wrote a tool that does everything the Knowledge Base article says to do. But it's not working. I'm inducing the issue by changing the bios SATA controller to AHCI, then moving it to another computer and updating it's registry. When I move it back to the other computer, nothing new happens. Can someone tell me what more I need to do?

  Read the article

• Laptop white screen on power-up. Still displays via HDMI output

  - by Inno

  my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

  Read the article

• Ubuntu won't log in after update

  - by Dave M G

  I just updated Ubuntu about 15 minutes ago on my desktop which is running 12.04. Within the set of updates, there were some kernel upgrades. It didn't say I needed to reboot after the update was finished, but I thought I would anyway. The computer successfully rebooted up to the login screen. However, after entering my password, the screen goes black for a moment, then it comes back to the login screen. I tried the suggestions in this question, but unfortunately they didn't help. In the accepted answer, the questioner vaguely says it was a "Unity problem". I'm using Gnome-classic with full Compiz effects. I tried uninstalling and reinstalling Compiz, but that didn't fix anything. So... I can't use my desktop computer until this is fixed. I hope there is some help soon. I've uploaded the output of cat /var/log/Xorg.0.log to Pastebin. A temporary solution of changing to gdm instead of lightdm was found with help in the chat room.

  Read the article

• How can I load one image over network to multiple computers on boot?

  - by user754730

  A few years ago I saw this in a company but I don't know how it was built. There was 1 Computer (I don't know if Windows Server or plain Windows 7 - the server) and 3 other computers (Windows 7 - the clients). As soon as the Windows 7 clients were started, they all started up the same image (Don't know if the same image file or just the same state) over network and were able to work on the computer. As soon as the machine was shutdown, all the changes made to the system were erased. How could I build a system like this so I have 1 image file which I keep up to date and then feed it to the other machines in my network? It would look this this basically:

  Read the article

• Autoplay for USB drive keeps popping up

  - by Adam Haile

  I have a Seagate external 2TB USB drive that when I leave it plugged in, the Autoplay dialog asking what to do with the drive pops up about once every 30-60 minutes. No matter how many times I tell it to go away, it keeps coming back. I have tried multiple power supplies, USB cables, and all the USB ports on my machine...but it keeps doing the same thing. Also, this does not happen with the same drive on a different computer. Could this be some power or configuration setting that is causing this? I'm running Windows 7 x64 (the computer it works on is x86)

  Read the article

• I don't program in my spare time. Does that make me a bad developer?

  - by not-my-real-name

  A lot of blogs and advice on the web seem to suggest that in order to become a great developer, doing just your day job is not enough. For example, you should contribute to open source projects in your spare time, write smartphone apps, etc. In fact a lot of this advice seems to suggest that if you don't love programming enough to do it all day long then you're probably in the wrong career. That doesn't ring true with me. I enjoy my work, but when I come home from the office I'm not in the mood to jump straight back onto the computer and start coding away until bedtime. I only have a certain number of hours free time each day, and I'd rather spend them on other hobbies, seeing friends or going outside than in front of the computer. I do get a kick out of programming, and do hack around outside of work occasionally. I'm committed to my personal development and spend time reading tech blogs and books as a way to keep learning and becoming better. But that doesn't extend so far as to my wanting to use all my spare time for coding. Does this mean I'm not a 'true' software developer at heart? Is it possible to become a good software developer without doing extra outside your job? I'd be very interested to hear what you think.

  Read the article

• Graphics hardware warning when updating to 14.04

  - by pacomet

  As I use Ubuntu at work I just update only LTS versions but now I'm not sure if I can/should. As my computer is now ten years old I would change if was mine but as it is owned by my employer I have to work with it. It's not a bad one, it runs fine (this was not true when still had Windows on it ;-). When updating to 14.04, it warns about possible bad/slow performance with Unity 3D so I stop updating as I am at work, not my own computer. As I understand from http://askubuntu.com/a/438958/25305 Nvidia Geforce FX 5500 graphics card is still supported in 14.04. Now, in 12.04, I have driver version 173 and unity 2d runs fine for me. output of /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.39 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Should I update? Is it better to stay with 12.04? Thanks

  Read the article

• Accessing locally hosted webpage via public IP

  - by Mk12

  Sorry if this is in the wrong place.I don't really know anything about server-related things, but I'm really curious about this. On my mac I figured out how to make a simple web page viewable via the local ip address or computer name on the LAN, and also how to hook it up with a free hostname from dyndns.com. So the dyndns hostname points to something, how can I access it directly? Typing in the global ip address (of the router) doesn't work, but if it did, how would it know which computer to point to? There must be some way of directly accessing what dyndns hostname points to by typing in some number, right? Sorry I don't really understand how it works.

  Read the article

• Screenflick Audio option in MacBook Pro

  - by John

  When after I shut down my MacBook Pro by holding the power button for a few sec, (which I found is bad for the computer, so I will not do anymore) I found that my speaker doesn't play until I plug in and out earphone into the machine. When my speaker is not working like this, and when I am on a random webcam chatting site like chatroulette.com, they can hear the music playing on my iTunes when I choose Screenflick Audio option in the Mic setting. But when the Speaker is working back again, they don't hear the music playing even when I do Screenflick Audio mode. How can I make it work? Also, how do you make the chatting partner hear my music playing on my computer while I talk to them (not via my speaker, since it's bad quality).

  Read the article

• after power outage, monitor won't turn on

  - by J82

  I had a power outage in my apartment today during a Windows 7 SP1 update. I installed SP1 and it told me to restart so I did and that's when the power outage happened. After the power came back on, I started the computer and it looks like the computer is running normally but my monitor is not getting a signal. I am using a Wacom Cintiq 21UX. I tried unplugging all the cords and plugs in the power strip and turning it back on. I also tried a strange method I read in another thread of removing the power cord, holding the on button for 30 seconds, putting the power cord back in, and turning it on. Still no dice. How can I get my monitor to turn on? please help..

  Read the article

• Office features disabled in standalone Outlook

  - by Jared275

  I have Office 2007 basic suite installed on my computer. I installed Outlook 2010 from a volume license provided by our Email Server Provider. When creating a new email all of the Office features are disabled in the ribbon. This microsoft support article describes my issue, however I do not have Office installed as click and run. It seems to me that there should be a way to make outlook recognize the office suite already installed. The "add or remove features" dialogue accessed through programs and features from the control panel seems promising, however its only options for "office features" are run from computer, or install on 1st run. I can't seem to find any valid articles online that aren't just dealing with the click to run issue. I know that there are several people at my company with the same set up, installed the same way that have everything working fine. How can I get my standalone Outlook 2010 install to recognize the Office 2007 basic suite?

  Read the article

• is wisdom of what happens 'behind scenes' (in compiler, external DLLs etc.) important?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• Using command line to connect to a wireless network with an http login

  - by Shane

  I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something. Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

  Read the article

• Where can I get a splitter to connect a device with a single 3.5 mm plug into the audio input/output jacks on my laptop?

  - by XinJeisan

  I recently bought the :Hype Retro Handset for Mobile Phone" -- its just a device that looks like a handset to use when chatting on a computer or mobile phone that plugs into the phone/computer with a single 3.5 mm plug. I was hoping to use it on my windows 7 Toshiba laptop. I can hear audio fine through the handset but what I'm saying is not being picked up on the handset. On the box it says "some phones and computers may need additional adapters," so I'm hoping it is possible to get a splitter or something for this to work properly. I did email the parent company (http://dglusa.com/) but I haven't heard from them, and, looking over their website, I doubt I will. I also went to the local radio shack, and the guy said I needed a splitter, but he didn't know where to get one. I can find the kind of splitter I think I need online, but I'm unsure whether they are just for output or can also do input/output.

  Read the article

• Mysql refusing connection: a very special connection issue

  - by k to the z

  I have my programers remoting into a web server with windows rdp. This web server is the only machine that can access another mysql server in a secure zone. When I remote into the web server from my machine I am able to connect to the mysql server through the mysql workbench on the web server. However, when I try this same procedure from another person's computer I can get into the server via rdp. I just can't connect to mysql using the workbench. I have checked and re checked the credentials and connection information. They match. I've had other people check and re check the credentials. As far as mysql permissions are concerned this user is allowed to connect from any machine. Plus I'm remoting into the same web server. The only difference seems to be which computer is remoting into the webserver. wtf?

  Read the article

• Virtualbox crashes quite often in Windows 8

  - by user1776158

  I just installed Windows 8 on my computer. I got the ISO and the product key from my university so the software itself is sound. I use alot of virtual box. And ever since I moved to Windows 8, I have noticed that virtual box crashes more often. In particular, it is very very bad at opening multiple guests. My CPU usage will be at like 20% and I only have 3 guests open and my entire computer just freezes. Cursor and all. In Windows 7, I was able to open like 6 (not that I ever needed to) and really push my CPU. I havent experience any other issues with Windows 8 yet. Has anyone encountered this? Thanks!

  Read the article

• Changing Word mail merge data source locations in bulk?

  - by Daft Viking

  I've just moved a number of Word mail merge files, and a number of Excel spreadsheets that are the data sources for the mail merges, from a Windows XP computer to a Windows 7 computer, and now all the paths for the merge sources are incorrect (used to be c:\documents and settings\user\my documents.... now c:\users\documents....). While I can correct the path of the data source in each file individually, I was hoping that there would be some way of updating the files in bulk, as there are a relatively large number of them. Word 2007 is what is being used, but the documents are all in the previous DOC format (not DOCX).

  Read the article

• Upgrading MacBookPro

  - by moray95

  I'm using a Late 2011 13" MacBook Pro with an Intel i5 @ 2.4 GHz and 4 GB 1333 MHz ram. The computer has started to get older. I was going to upgrade the ram but since Mavericks come out, the ram problem just went away and now, it started to get slower and slower. So I was thinking of upgrading my ram to at least 8GB and my CPU. I have two question about that. As I have 1333Mhz rams installed by default, the motherboard should not support 1666Mhz rams. But can I use 1666 Mhz ones and if I can will it make any difference? Also is it possible to upgrade the CPU of my computer? If yes how can I find a CPU compatible with the other components?

  Read the article

• Windows 7 strange boot issue

  - by JL

  Recently I installed an SSD drive, its now my primary boot drive (OCZ Vertex Turbo 60GB). I'm running Win 7 (64bit). Now I am not sure exactly where the fault lies, but when I do a restart from within Windows, the computer will boot and enter into the loading windows portion, however won't progress beyond there. My solution is to manually hit the reset switch, and then when it boots it enters into a windows menu that offers a start up repair or start windows normally. I select start windows normally, and then it boots fine. I am not entirely sure why I can't just restart the computer from windows normally though. The SSD drive works perfectly, and not even sure if it is the cause to this problem. Any ideas on this?

  Read the article

• PCs with Wired Connection Keep Losing Internet Connectivity

  - by user717452

  I have a U-verse ATT DSL Internet at our church building. Recently, any computer that is plugged into the network via Ethernet keeps losing its internet connectivity. The setup is from the Modem to a Netgear Wireless Router, and from the router to 3 different computers. None of the laptops that use Wifi ever lose internet, just the wired ones, and I end up having to do ipconfig /release and /renew every day to get it back. One computer has Windows 7 and one has Windows XP. Any ideas as to what is going on with our network?

  Read the article

• Wake-On-Lan - is it possible to access boot menu?

  - by truthseeker

  Now imagine this situation. I have a computer which has 2 operating systems installed - Windows XP and Windows 7. On booting menu is displayed where I can select which operating system I want to load. When I do nothing, Windows 7 loads (after some delay). This computer is connected to LAN and has Wake-On-Lan function enabled. Is it possible to remotely select which operating system I wish to load? Now it is Windows 7. But sometimes I wish it would be Windows XP.

  Read the article

• install clamav from surceforge

  - by maria

  I'm using Ubuntu 10.04. I'm affraid I've installed a virus on my computer (I've clicked a link which was a virus), I'd prefere to check if everything is fine. I've installed clamAV using Synaptic. The installed version was 0.96.5, while the most recent version is 0.97.6. When I was trying to update virus database, I got a warning that the version of clamAV I'm using is outdated. Since I didn't know how to update the software by Synaptic or apt (both show the installed version as the newest) I've uninstalled all and downloaded the recent version from sourceforge. I've unpacked the tar.gz archive, entered the folder but when I type ./configure I'm getting the message: configure: error: Please install zlib and zlib-devel packages When I type sudo aptitude install zlib zlib-devel The terminal output says there is no such packages (there is no package zlib-devel and there is many packages which name contain zlib). I suppose the link contained probably the Windows virus, but I'd prefere to make sure there is nothing in my computer. As well as I'm not sure if the virus, even without harming my system, can send itself to my e-mail contacts or not.

  Read the article

• Ubuntu 12.10 wont boot

  - by John Mark High

  im new to using Ubuntu and just bought a HP Pavilion g6-2240sa with windows 8 pre installed. I made a bootable USB with Ubuntu on it and installed alsongside windows, for 2 days it worked fine, I got into Ubuntu by doing an advanced restart from windows 8 and then booting Ubuntu from the partition it made. When i did the advanced restart today there was only 1 HDD i could select ( there were 3 before windows, a restore partition that was already there when i got the computer and Ubuntu) so i booted from the USB again and re-installed Ubuntu. then did an advanced restart and the 3 partitions where there again, i booted from Ubuntu and now heres my problem. I get the Ubuntu background when its loading then its just a black screen with some writing, its not on long enough to read, then just a black screen with a white _ and the top left corner that does nothing, i have to restat the computer and it auto boots into windows 8. im a little confused as the first time i installed Ubuntu it worked fine until the partition dissaperd), the second time i installed i did everything the same except it found the old Ubuntu so i reinstalled it and now is donst work.

  Read the article

• Hostname confusion (Ubuntu Server 10.04)

  - by letseatfood

  I have just setup Ubuntu 10.04 Server Edition. I have been following this tutorial. The DNS information seems to be setup correctly now, but I am confused about the hostname. Currently it is laughingbuddha.home. That is a name I created. Now, I am mainly not sure how to connect from another computer on my network. I basically want to be able to put PHP files on the server box and then test them via a web browser on my other computer. So, I think I digressed from my first question, but would somebody please help me figure out if the hostname is okay for doing what I need to do? Thank-you!

  Read the article

< Previous Page | 207 208 209 210 211 212 213 214 215 216 217 218  | Next Page >