Search Results

Search found 5572 results on 223 pages for 'cpu'.

Page 212/223 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• What would cause Memcached to Hang for 2+ seconds?

  - by Brad Dwyer

  I'm going nuts trying to scale memcached. From their site: Memcached operations are almost all O(1). Connecting to it and issuing a get or stat command should never lag. If connecting lags, you may be hitting the max connections limit. See ServerMaint for details on stats to monitor. If issuing commands lags, you can have a number of tuning problems. Most common are hardware problems, not enough RAM (swapping), network problems (bandwidth, dropped packets, half-duplex connections). On rare occasion OS bugs or memcached bugs can contribute. Well.. it is most certainly not performing like an O(1) operation for me. Under low to normal load on our site memcached response times for get and set ops are about 0.001 seconds. Not bad. But if we triple the load we get outliers that take 100x (or in rare cases 1000x!) that long. I even had one instance where it took 2.2442 seconds for memcached to store a value. Obviously this is killing our site. Here's the output of Memcached-getStats during one of the slow periods: [pid] => 18079 [uptime] => 8903 [threads] => 4 [time] => 1332795759 [pointer_size] => 32 [rusage_user_seconds] => 26 [rusage_user_microseconds] => 503872 [rusage_system_seconds] => 125 [rusage_system_microseconds] => 477008 [curr_items] => 42099 [total_items] => 422500 [limit_maxbytes] => 943718400 [curr_connections] => 84 [total_connections] => 4946 [connection_structures] => 178 [bytes] => 7259957 [cmd_get] => 1679091 [cmd_set] => 351809 [get_hits] => 1662048 [get_misses] => 17043 [evictions] => 0 [bytes_read] => 109388476 [bytes_written] => 3187646458 [version] => 1.4.13 So things that I have ruled out so far are: Hitting the max connections limit (curr_connections of 84 is well below the default of max of 1024) Swapping - the machine has 900M out of 1024M of memory dedicated to memcached on a dedicated machine. It only appears to be using about 7MB of data as per the bytes stat. How would I diagnose the other hardware problems? prstat doesn't really show a whole lot going on in terms of CPU or memory usage. Not sure how to figure out the network problems but as this is a dedicated server on the same private network as the web box I don't think it's a connectivity issue (ping is less than a millisecond between the boxes). Is there something else I'm missing here? It's driving me nuts. Edit: Also forgot to mention that I've tried both persistent and non-persistent connections with minimal-to-no impact.

  Read the article

• FFMPEG dropping frames while encoding JPEG sequence at color change

  - by Matt

  I'm trying to put together a slide show using imagemagick and FFMPEG. I use imagemagick to expand a single photo into 30fps video (imagemagick also handles things like putting some text captions on the frames along the way). When I go to let ffmpeg digest it into a video it clips along nicely on the color parts of the video, but when it gets to a black and white section it reports "frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703" and drops every frame of video until it hits something with color. As you can imagine this results in entire photos being removed from the slideshow. Here is my latest dump... ffmpeg -y -r 30 -i "teststream/%06d.jpg" -c:v libx264 -r 30 newffmpeg.mp4 ffmpeg version git-2012-12-10-c3bb333 Copyright (c) 2000-2012 the FFmpeg developers built on Dec 10 2012 22:02:04 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libx264 --enable-nonfree --enable-version3 libavutil 52. 12.100 / 52. 12.100 libavcodec 54. 79.101 / 54. 79.101 libavformat 54. 49.100 / 54. 49.100 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 26.101 / 3. 26.101 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'teststream/%06d.jpg': Duration: 00:12:02.80, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, yuvj444p, 720x480 [SAR 72:72 DAR 3:2], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0x3450140] using SAR=1/1 [libx264 @ 0x3450140] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x3450140] profile High, level 3.0 [libx264 @ 0x3450140] 264 - core 129 r2 1cffe9f - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'newffmpeg.mp4': Metadata: encoder : Lavf54.49.100 Stream #0:0: Video: h264 ([33][0][0][0] / 0x0021), yuvj420p, 720x480 [SAR 1:1 DAR 3:2], q=-1--1, 15360 tbn, 30 tbc Stream mapping: Stream #0:0 - #0:0 (mjpeg - libx264) Press [q] to stop, [?] for help Input stream #0:0 frame changed from size:720x480 fmt:yuvj444p to size:720x480 fmt:yuvj422p Input stream #0:0 frame changed from size:720x480 fmt:yuvj422p to size:720x480 fmt:yuvj444pp=584 frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703 video:5179kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.472425% [libx264 @ 0x3450140] frame I:9 Avg QP:20.10 size: 33933 [libx264 @ 0x3450140] frame P:636 Avg QP:24.12 size: 6737 [libx264 @ 0x3450140] frame B:1385 Avg QP:27.04 size: 514 [libx264 @ 0x3450140] consecutive B-frames: 2.5% 15.2% 13.2% 69.2% [libx264 @ 0x3450140] mb I I16..4: 8.3% 80.3% 11.5% [libx264 @ 0x3450140] mb P I16..4: 1.5% 2.5% 0.2% P16..4: 41.7% 18.0% 10.3% 0.0% 0.0% skip:25.9% [libx264 @ 0x3450140] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 26.6% 0.6% 0.1% direct: 0.2% skip:72.3% L0:35.0% L1:60.3% BI: 4.7% [libx264 @ 0x3450140] 8x8 transform intra:64.1% inter:75.1% [libx264 @ 0x3450140] coded y,uvDC,uvAC intra: 51.6% 78.0% 43.7% inter: 10.6% 14.9% 2.1% [libx264 @ 0x3450140] i16 v,h,dc,p: 29% 19% 6% 46% [libx264 @ 0x3450140] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 23% 15% 17% 5% 9% 10% 7% 8% 6% [libx264 @ 0x3450140] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 31% 18% 11% 5% 9% 10% 6% 6% 4% [libx264 @ 0x3450140] i8c dc,h,v,p: 46% 18% 24% 12% [libx264 @ 0x3450140] Weighted P-Frames: Y:20.1% UV:18.7% [libx264 @ 0x3450140] ref P L0: 59.2% 23.2% 13.1% 4.3% 0.2% [libx264 @ 0x3450140] ref B L0: 88.7% 8.3% 3.0% [libx264 @ 0x3450140] ref B L1: 95.0% 5.0% [libx264 @ 0x3450140] kb/s:626.88 Received signal 2: terminating. One last note: If I remove the -r 30 from the input and output it works flawlessly. I have no idea why the -r 30 is causing it to freak out.

  Read the article

• Why does my computer run slowly and freeze sometimes?

  - by Brae

  EDIT I disabled sound in the BIOS, rebooted and it hung. I removed the (previously) faulty HDD, rebooted and it hung. I have managed to get my Realtek audio manager open again after its mysterious disappearance. Subsequently my microphone is now working again, to fix it I had to uninstall audio drivers, disable audio in BIOS, install audio drivers, enable audio in BIOS. Access via network (with faulty HDD in) seems to not be triggering hangs at the moment. I think with the sound problem fixed it might play a little nicer, but I think its still going to hang. If it does, then I'm fairly sure its been narrowed down to the mobo. EDIT Pretty convinced my motherboard is the culprit, because nothing else seems to have any obvious problems (bar the hard drive, which the PC still hangs without it being plugged in) So thank you all for helping, once I get more rep ill up a few of the answers. My PC is doing some weird things... Sometimes when I open up a program, lets say Adobe Photoshop, it will load everything normally, nice and quick no problems and I can use it fine. Other times its a little odd, and it loads the program as if it's only using half of the CPU. It's pretty obvious when it does it, normally the loading screen skims past, but when it does this weird load you see it slowly tick though each thing, and the program itself becomes incredibly slow. Even Google Chrome does it sometimes. Yet when I exit and reopen the program without doing anything else, it typically opens fine without lagging. I think this problem is probably a symptom of something bigger, because of other problems I'm having. Random hangs; no matter what I have open or what I'm doing. My PC will sort of freeze up for a few seconds. If music is playing it will either loop the last second or two, or it will buzz. This only lasts for a few seconds then it returns to normal without having to restart. During this time all programs lock up and freeze, and the mouse and keyboard are useless. I am also having a weird issue with my audio jacks, without touching my PC at all, sometimes I will see a popup saying that I have unplugged something or plugged something in, neither of which has actually happened. Pretty sure this is cause by the motherboard. I recently had a 'Pink Screen of Death' (yes pink) which pointed to my audio drivers. The lockups seem to happen with some consistency when someone is accessing my shared files via my home LAN. Which leads me to believe either one of my hard drives is acting up or more likely the controller. One of my drives had a bit of a crash before, I used Spinrite and managed to recover my stuff and now the drive appears to be working okay. This is possibly adding to the problems. My best guess is something has gone wrong with my motherboard, possibly a power issue or a chip has died, I really don't know. So what I would like to know is: Have I have missed some obvious diagnostic to help figure out what it is, or should I just bite the bullet and assume its my motherboard acting up and buy a new system? dxdiag[64-bit] - http://pastebin.com/G30kb2TL PSOD (minidump) - http://pastebin.com/aZsv0H56 HWiNFO64 (system info / specs) - http://pastebin.com/X6h3K8g6

  Read the article

• Trouble in Nginx hotlink protection

  - by Ayaz Malik

  I am trying to implement image hotlink protection problem in nginx and I need help. I have a huge issue of my site's images being submitted to social networks like StumbleUpon with a direct link like http://example.com/xxxxx.jpg Which sometimes gets huge traffic and increases CPU usage and bandwidth usage. I want to block direct access to my images from other referrers and protect them from being hotlinked. Here is the code from my vhost.conf server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } For hotlink protection I added this code location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } This is the current nginx code for this domain, but it didn't work: server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } How can I fix this?

  Read the article

• How can I recover an ext4 filesystem corrupted after a fsck?

  - by Regan

  I have an ext4 filesystem on luks over software raid5. The filesystem was operating "just fine" for several years when I was beginning to run out of space. I had a 9T volume on 6x2T drives. I began upgrading to 3T drives by doing the mdadm fail, remove, add, rebuild, repeat process until I had a larger array. I then grew the luks container, and then when I unmounted and tried to resize2fs I was given the message the filesystem was dirty and needed e2fsck. Without thinking I just did e2fsck -y /dev/mapper/candybox and it began spewing all kinds of inode being removed type messages (can't remember exactly) I killed e2fsck and tried to remount the filesystem to backup data I was concerned about. When trying to mount at this point I get: # mount /dev/mapper/candybox /candybox mount: wrong fs type, bad option, bad superblock on /dev/mapper/candybox, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Looking back at my older logs I noticed the filesystem was giving this error each time the machine booted: kernel: [79137.275531] EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended So shame on me for not paying attention :( I then tried to mount using every backup superblock (one after another) and each attempt left this in my log: EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 0 failed (26534!=65440) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 1 failed (38021!=36729) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 2 failed (18336!=39845) ... EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 11911 failed (28743!=44098) BUG: soft lockup - CPU#0 stuck for 23s! [mount:2939] Attempts to restart e2fsck results in: # e2fsck /dev/mapper/candybox e2fsck 1.41.14 (22-Dec-2010) e2fsck: Group descriptors look bad... trying backup blocks... candy: recovering journal e2fsck: unable to set superblock flags on candy At this point, I decided it best to order some more drives and make an image using ddrescue Now two weeks later I have an image of the luks partition in a .img file. # ls -lh total 14T -rw-r--r-- 1 root root 14T Oct 25 01:57 candybox.img -rw-r--r-- 1 root root 271 Oct 20 14:32 candybox.logfile After numerous attempts using everything I could find online I could not coerce e2fsck to do anything on the image, so I used mkfs.ext4 -L candy candybox.img -m 0 -S and I was able to mount the dirty filesystem readonly without the journal and recover 960G of data. It gave all kinds of errors of various directories not existing and so forth but I was able to get some stuff. Which gave me some hope! I then ran e2fsck again and it had to recreate the root inode and gave a massive list of correcting group counts, I accepted the root inode creation and said no to everything else, leaving a completely empty filesystem. Re-ran again and said yes to all questions with the same result but now a "clean" but empty filesystem. extundelete gives me 0 recoverable inodes found. And now I'm stuck again, I can't come up with any other methods other than dropping to something like photorec which will give me an absolute mess with how large the filesystem was. I'm willing to re-copy the image from the original array and start over, if I can get any suggestions or ideas on a way to get more of my files back. I wish I could give more detailed logs of the commands that have run, but the output is long scrolled passed except for what gets logged to syslog and my memory is not as detailed due to the timeframe this has occurred over. Any help is greatly appreciated!

  Read the article

• BSOD Code 16, artifacts all over the place (gtx 260)

  - by belinea

  I have a following, quite dated rig E8400 Core 2 Duo cpu Intel Dragontail Peak DP35DP motherboard on Intel Bearlake P35 chipset 4GB ram Geforce 260gtx Corsair 650W PSU Windows 7 64 bit The following things has happened in the last few days. I first decided to update my Nvidia drivers to the latest version. That was 4 days ago. PC worked fine for 2 days and I was able to play few games as well without any problems. Then 2 days ago a first crash happened while playing the new XCOM game. BSOD code 16. Just the blue screen, no artifacts. PC rebooted and worked well again, I continued playing this game for another 2 hours and went to sleep. Next evening I tried to play some BF3 multiplayer (use to play on LOW settings). Approx. 10 minutes into the game red/pink-ish artifacts appeared on the screen and game quit to desktop. Restarted the game and another 3-4 minutes afterwards another crash to desktop but this time followed shortly by BSOD Code 16. From that moment I started to seeing artifacts on random startups, including Windows loading screen and the BIOS itself. Windows would still load but soon enough it would BSOD on a simple task like opening a Internet browser. Today I get tons of artifacts (little small red dashes all over the screen) on BIOS, loading screen, normal Windows mode as well as safe mode. I suspect it wouldn't be drivers but I tried removing and sweeping them entirely in the safe mode. PC would still start with artifacts all over the place but would load the normal mode, just without the driver, in the default lowest resolution. As soon as proper Nvidia drivers are installed though and PC rebooted, Windows doesn't load at all as BSOD now appears on loading screen. However, again, if I go to safe mode and remove drivers, normal mode launches fine. So obviously crash happens only on high resolution. I opened my machine this morning and gave it a proper cleaning even though it wasn't heavily dusted. It didn't help and number of artifacts seems to increase with every PC restart. I write these words in safe mode, which works, but I have to look through all the red dots and dashes. I don't have built in GPU chipset so I can't try removing my Geforce card nor can I borrow A GPU from anyone else. What are my options? I was looking into getting a completely new rig around Christmas so I'm not freaking out about this. If everything points to hardware issue I may simply decide to get the new machine earlier and don't bother with fixing this one. However it would be great to learn more if this is indeed situation that has slim chances of getting sorted. I realize BSOD Code 16 is rather popular topic online but every story seems a bit different and there can be number of issues with it. Hence a new thread.

  Read the article

• MySQL reserves too much RAM

  - by Buddy

  I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

  Read the article

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• Weird Apache Access Logs

  - by user38480

  I see repeated requests like these in my Apache Access Logs and they have been eating up all my CPU. I have a normal WordPress installation. All i changed in the Apache Configuration was changing the DocumentRoot from /var/www/html to /var/www for both ssl and the default configuration. Also, the file referenced in the requests(updatedll.jpeg) does not exist on my server and also isn't referenced in the source code served by any page of the web application. Could this be a security threat? What are these actually and what can i do to stop them. I changed the ip address of my server. They still kept coming. Meaning that somebody is actually hitting the domain name and not the ip address. Why does my server send a 301 for these requests? Shouldn't it be sending a 404? Is it because Wordpress is installed in my root directory and the .htaccess file present for Wordpress is sending a 301 redirect? My disk access logs also seem to have high peaks intermittently. But nobody is actually accessing the site. I see no access logs except these below. Also, i see that all the requests seem to be coming from one of the following 5 ip addresses. 201.4.132.43 - - [05/Jun/2014:07:35:08 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; BTRS103681; GTB7.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; InfoPath.2; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; AskTbATU3/5.15.29.67612; BRI/2)" 187.40.241.48 - - [05/Jun/2014:07:35:08 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB7.5; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)" 186.56.134.132 - - [05/Jun/2014:07:35:10 -0400] "GET /updatedll.jpg HTTP/1.0" 301 428 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)" 71.223.252.14 - - [05/Jun/2014:07:35:13 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; BTRS31756; GTB7.5; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; .NET4.0E; InfoPath.2)" 85.245.229.167 - - [05/Jun/2014:07:35:14 -0400] "GET /updatedll.jpg HTTP/1.1" 301 465 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; .NET4.0C; BRI/2; .NET4.0E; MAAU)"

  Read the article

• File server share access intermittent/slow/machine unstable: win2kr2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• mySQL Optimization Suggestions

  - by Brian Schroeter

  I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

  Read the article

• Tips / techniques for high-performance C# server sockets

  - by McKenzieG1

  I have a .NET 2.0 server that seems to be running into scaling problems, probably due to poor design of the socket-handling code, and I am looking for guidance on how I might redesign it to improve performance. Usage scenario: 50 - 150 clients, high rate (up to 100s / second) of small messages (10s of bytes each) to / from each client. Client connections are long-lived - typically hours. (The server is part of a trading system. The client messages are aggregated into groups to send to an exchange over a smaller number of 'outbound' socket connections, and acknowledgment messages are sent back to the clients as each group is processed by the exchange.) OS is Windows Server 2003, hardware is 2 x 4-core X5355. Current client socket design: A TcpListener spawns a thread to read each client socket as clients connect. The threads block on Socket.Receive, parsing incoming messages and inserting them into a set of queues for processing by the core server logic. Acknowledgment messages are sent back out over the client sockets using async Socket.BeginSend calls from the threads that talk to the exchange side. Observed problems: As the client count has grown (now 60-70), we have started to see intermittent delays of up to 100s of milliseconds while sending and receiving data to/from the clients. (We log timestamps for each acknowledgment message, and we can see occasional long gaps in the timestamp sequence for bunches of acks from the same group that normally go out in a few ms total.) Overall system CPU usage is low (< 10%), there is plenty of free RAM, and the core logic and the outbound (exchange-facing) side are performing fine, so the problem seems to be isolated to the client-facing socket code. There is ample network bandwidth between the server and clients (gigabit LAN), and we have ruled out network or hardware-layer problems. Any suggestions or pointers to useful resources would be greatly appreciated. If anyone has any diagnostic or debugging tips for figuring out exactly what is going wrong, those would be great as well. Note: I have the MSDN Magazine article Winsock: Get Closer to the Wire with High-Performance Sockets in .NET, and I have glanced at the Kodart "XF.Server" component - it looks sketchy at best.

  Read the article

• <msbuild/> task fails while <devenv/> succeeds for MFC application in CruiseControl.NET?

  - by ee

  The Overview I am working on a Continuous Integration build of a MFC appliction via CruiseControl.net and VS2010. When building my .sln, a "Visual Studio" CCNet task (<devenv/>) works, but a simple MSBuild wrapper script (see below) run via the CCNet <msbuild/> task fails with errors like: error RC1015: cannot open include file 'winres.h'.. error C1083: Cannot open include file: 'afxwin.h': No such file or directory error C1083: Cannot open include file: 'afx.h': No such file or directory The Question How can I adjust the build environment of my msbuild wrapper so that the application builds correctly? (Pretty clearly the MFC paths aren't right for the msbuild environment, but how do i fix it for MSBuild+VS2010+MFC+CCNet?) Background Details We have successfully upgraded an MFC application (.exe with some MFC extension .dlls) to Visual Studio 2010 and can compile the application without issue on developer machines. Now I am working on compiling the application on the CI server environment I did a full installation of VS2010 (Professional) on the build server. In this way, I knew everything I needed would be on the machine (one way or another) and that this would be consistent with developer machines. VS2010 is correctly installed on the CI server, and the devenv task works as expected I now have a wrapper MSBuild script that does some extended version processing and then builds the .sln for the application via an MSBuild task. This wrapper script is run via CCNet's MSBuild task and fails with the above mentioned errors The Simple MSBuild Wrapper <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Target Name="Build"> <!-- Doing some versioning stuff here--> <MSBuild Projects="target.sln" Properties="Configuration=ReleaseUnicode;Platform=Any CPU;..." /> </Target> </Project> My Assumptions This seems to be a missing/wrong configuration of include paths to standard header resources of the MFC persuasion I should be able to coerce the MSBuild environment to consider the relevant resource files from my VS2010 install and have this approach work. Given the vs2010 msbuild support for visual c++ projects (.vcxproj), shouldn't msbuilding a solution be pretty close to compiling via visual studio? But how do I do that? Am I setting Environment variables? Registry settings? I can see how one can inject additional directories in some cases, but this seems to need a more systemic configuration at the compiler defaults level. Update 1 This appears to only ever happen in two cases: resource compilation (rc.exe), and precompiled header (stdafx.h) compilation, and only for certain projects? I was thinking it was across the board, but indeed it appears only to be in these cases. I guess I will keep digging and hope someone has some insight they would be willing to share...

  Read the article

• Python Memory leak - Solved, but still puzzled

  - by disappearedng

  Dear everyone, I have successfully debugged my own memory leak problems. However, I have noticed some very strange occurence. for fid, fv in freqDic.iteritems(): outf.write(fid+"\t") #ID for i, term in enumerate(domain): #Vector tfidf = self.tf(term, fv) * self.idf( term, docFreqDic) if i == len(domain) - 1: outf.write("%f\n" % tfidf) else: outf.write("%f\t" % tfidf) outf.flush() print "Memory increased by", int(self.memory_mon.usage()) - startMemory outf.close() def tf(self, term, freqVector): total = freqVector[TOTAL] if total == 0: return 0 if term not in freqVector: ## When you don't have these lines memory leaks occurs return 0 ## return float(freqVector[term]) / freqVector[TOTAL] def idf(self, term, docFrequencyPerTerm): if term not in docFrequencyPerTerm: return 0 return math.log( float(docFrequencyPerTerm[TOTAL])/docFrequencyPerTerm[term]) Basically let me describe my problem: 1) I am doing tfidf calculations 2) I traced that the source of memory leaks is coming from defaultdict. 3) I am using the memory_mon from http://stackoverflow.com/questions/276052/how-to-get-current-cpu-and-ram-usage-in-python 4) The reason for my memory leaks is as follows: a) in self.tf, if the lines: if term not in freqVector: return 0 are not added that will cause the memory leak. (I verified this myself using memory_mon and noticed a sharp increase in memory that kept on increasing) The solution to my problem was 1) since fv is a defaultdict, any reference to it that are not found in fv will create an entry. Over a very large domain, this will cause memory leaks. I decided to use dict instead of default dict and the memory problem did go away. My only puzzle is: since fv is created in "for fid, fv in freqDic.iteritems():" shouldn't fv be destroyed at the end of every for loop? I tried putting gc.collect() at the end of the for loop but gc was not able to collect everything (returns 0). Yes, the hypothesis is right, but the memory should stay fairly consistent with ever for loop if for loops do destroy all temp variables. This is what it looks like with that two line in self.tf: Memory increased by 12 Memory increased by 948 Memory increased by 28 Memory increased by 36 Memory increased by 36 Memory increased by 32 Memory increased by 28 Memory increased by 32 Memory increased by 32 Memory increased by 32 Memory increased by 40 Memory increased by 32 Memory increased by 32 Memory increased by 28 and without the the two line: Memory increased by 1652 Memory increased by 3576 Memory increased by 4220 Memory increased by 5760 Memory increased by 7296 Memory increased by 8840 Memory increased by 10456 Memory increased by 12824 Memory increased by 13460 Memory increased by 15000 Memory increased by 17448 Memory increased by 18084 Memory increased by 19628 Memory increased by 22080 Memory increased by 22708 Memory increased by 24248 Memory increased by 26704 Memory increased by 27332 Memory increased by 28864 Memory increased by 30404 Memory increased by 32856 Memory increased by 33552 Memory increased by 35024 Memory increased by 36564 Memory increased by 39016 Memory increased by 39924 Memory increased by 42104 Memory increased by 42724 Memory increased by 44268 Memory increased by 46720 Memory increased by 47352 Memory increased by 48952 Memory increased by 50428 Memory increased by 51964 Memory increased by 53508 Memory increased by 55960 Memory increased by 56584 Memory increased by 58404 Memory increased by 59668 Memory increased by 61208 Memory increased by 62744 Memory increased by 64400 I look forward to your answer

  Read the article

• Build failing - VS2010 solution on TFS2008

  - by Nick

  I have migrated a VS2008 ASP.NET MVC solution to VS2010/MVC2/.NET 4.0 The solution builds locally and all unit tests pass. Our TFS server is still TFS2008 and I am having problems getting the CI build to pass. The projects all build successfully, the unit tests all run and pass but the Running Tests item fails. I followed this blog post on how to get the build working and I'm almost there. Combing the log file for failures I have found the following: Test Run Completed. Passed 1101 ------------ Total 1101 Results file: C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\TestResults\apptemetrybuild_ATT15DEV01 2010-04-27 09_09_59_Any CPU_Release.trx Test Settings: Default Test Settings Waiting to publish... Publishing results of test run apptemetrybuild@ATT15DEV01 2010-04-27 09:09:59_Any CPU_Release to http://att15tfs01:8080/... .....Publish completed successfully. Command: D:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe /nologo /searchpathroot:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release" /resultsfileroot:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\TestResults" /testcontainer:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll" /publish:"http://att15tfs01:8080/" /publishbuild:"vstfs:///Build/Build/149" /teamproject:"Client Portal 3" /platform:"Any CPU" /flavor:"Release" The "TestToolsTask" task is using "MSTest.exe" from "D:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe". Loading C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll... C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll Could not load file or assembly 'file:///C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\Attenda.Stargate.Security.Tests.dll' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. MSBUILD : warning MSB6006: "MSTest.exe" exited with code 1. [C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\BuildType\TFSBuild.proj] The previous error was converted to a warning because the task was called with ContinueOnError=true. Build continuing because "ContinueOnError" on the task "TestToolsTask" is set to "true". Done executing task "TestToolsTask" -- FAILED. It looks like it's trying to use the 2008 MSTest tool even though I have specified ToolsVersion="4.0" in the tfsbuild.proj and changed the MSBuildPath in the TfsBuildService.exe.config on the build server. Can anyone point me in the right direction to get this to build successfully? Many thanks, Nick

  Read the article

• Intermittent PolicyException: Execution permission cannot be acquired.

  - by Aaron Maenpaa

  We are intermittently seeing the following exception shortly after an App Pool recycle in an ASP.NET application: System.Configuration.ConfigurationErrorsException: Could not load file or assembly 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) ---> System.IO.FileLoadException: Could not load file or assembly 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) File name: 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' ---> System.Security.Policy.PolicyException: Execution permission cannot be acquired. at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString) at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) The specific DLL that fails to load varies from incident to incident, but is always one referenced by the main assembly. We're running on ASP.NET 3.5 on Windows Server 2008. This seems to happen in batches affecting some but not all of sites on the same App Pool. We have a large number of sites all running the same code. Once a site has failed to load a DLL it throws up a Yellow Screen of Death until the next App Pool recycle. We haven't been able to reproduce this behavior and the sites seem to work fine for days or weeks at a time (and many App Pool recycles) before failing. Has anybody else seen similar behavior? Update: We've tried reproducing the failure by setting up a few hundred sites and writing a script to hit them repeatedly while recycling the App Pool once every couple of minutes and were unable to accomplish much other than loading down the server's CPU for a few days straight. We then tried messing (locking one of the DLLs, changing the file permissions) with the copies of the DLLs that ASP.NET makes and managed to reproduce similar behavior but not the same exception. Does anybody have any ideas on how to adjust the security policy to get it to throw a System.Security.Policy.PolicyException: Execution permission cannot be acquired. when loading a specific DLL?

  Read the article

• Eventlet or gevent or Stackless + Twisted, Pylons, Django and SQL Alchemy

  - by Khorkrak

  We're using Twisted extensively for apps requiring a great deal of asynchronous io. There are some cases where stuff is cpu bound instead and for that we spawn a pool of processes to do the work and have a system for managing these across multiple servers as well - all done in Twisted. Works great. The problem is that it's hard to bring new team members up to speed. Writing asynchronous code in Twisted requires a near vertical learning curve. It's as if humans just don't think that way naturally. We're considering a mixed approach perhaps. Maybe do the xmlrpc server part and process management in Twisted still but the other stuff in code that at least looks synchronous while not being as such. Then again I like explicit over implicit so hmmm. Anyway onto greenlets - how well does that stuff work? So there's Stackless and as you can see from my Gallentean avatar I'm well aware of the tremendous success in it's use for CCP's flagship EVE Online game first hand. What about Eventlet or gevent? Well for now only Eventlet works with Twisted. However gevent claims to be faster since it's not a pure python implementation it instead uses libevent. It also has fewer idiosyncrasies and defects supposedly. The documentation there is minimal in comparison to Eventlet and it's maintained by 1 guy as far as I can tell. This makes me leery but all great projects start this way so... Then there's PyPy - I haven't even finished reading about that one yet - just saw it in this thread: Drawbacks of Stackless. So confusing - I'm wondering what the heck to do - sounds like Eventlet is probably the best bet but is it really stable enough? Anyone out there have any experience with it? Should we go with Stackless instead as it's been around and is proven technology - just like Twisted is as well - and they do work together nicely. But still I hate having to have a separate version of Python to do this. what to do.... This somewhat obnoxious blog entry hit the nail on the head for me though: Asynchronous IO for Grownups We're stuck using MySQL as well - I never knew how great PostgreSQL was until having had to work on a production OLTP system in MySQL instead - but that's another story. But if that monkey patch thing really works then wow. Just wow.

  Read the article

• "Bad binary signature" in ASP.NET MVC application

  - by David M

  We are getting the error above on some pages of an ASP.NET MVC application when it is deployed to a 64 bit Windows 2008 server box. It works fine on our development machines, though these are 32 bit XP. Just wondered if anyone had encountered this before, and has any suggestions? Details as follows: Bad binary signature. (Exception from HRESULT: 0x80131192) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: Bad binary signature. (Exception from HRESULT: 0x80131192) All projects are set to compile for Any CPU, and are compiled in Release mode. The ASP.NET site is precompiled, and the precompiled build is on a 64 bit Windows 2008 TeamCity build agent. Thanks in advance. EDIT We're still plagued by this. I have looked at all the binaries in the website's bin directory using corflags.exe. None has the 32BIT flag set, and all have a CorFlags value of 9 except for Antlr3.Runtime.dll which has a value of 1. The problem only affects certain pages, and it seems to be those which use FluentValidation (including FluentValidation.Mvc and FluentValidation.xValIntegration assemblies). None of these shows anything out of the ordinary when inspected with corflags.exe, and there are no odd looking dependencies revealed by ildasm. When built locally (32 bit Windows XP) the site deploys and runs fine. When built on the build agents (64 bit Windows 2008 Server) the site displays these errors. The site runs in Integrated Pipeline mode, and is not set to 32 bit. The stack trace is: [COMException (0x80131192): Bad binary signature. (Exception from HRESULT: 0x80131192)] ASP.views_user_newinternal_aspx.__RenderContent2(HtmlTextWriter __w, Control parameterContainer) in e:\TeamCity\buildAgent\work\605ee6b4a5d1dd36\...Admin.Mvc\Views\User\NewInternal.aspx:53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 ASP.views_shared_site_master.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in e:\TeamCity\buildAgent\work\605ee6b4a5d1dd36\...Admin.Mvc\Views\Shared\Site.Master:26 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.Mvc.ViewPage.Render(HtmlTextWriter writer) +94 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240

  Read the article

• Problem in linking an nasm code

  - by Stefano

  I'm using a computer with an Intel Core 2 CPU and 2GB of RAM. The SO is Ubuntu 9.04. When I try to compile this code: ;programma per la simulazione di un terminale su PC, ottenuto utilizzando l'8250 ;in condizione di loopback , cioè Tx=Rx section .code64 section .data TXDATA EQU 03F8H ;TRASMETTITORE RXDATA EQU 03F8H ;RICEVITORE BAUDLSB EQU 03F8H ;DIVISORE DI BAUD RATE IN LSB BAUDMSB EQU 03F9H ;DIVISORE DI BAUD RATE IN MSB INTENABLE EQU 03F9H ;REGISTRO DI ABILITAZIONE DELL'INTERRUZIONE INTIDENTIF EQU 03FAH ;REGISTRO DI IDENTIFICAZIONE DELL'INTERRUZIONE LINECTRL EQU 03FBH ;REGISTRO DI CONTROLLO DELLA LINEA MODEMCTRL EQU 03FCH ;REGISTRO DI CONTROLLO DEL MODEM LINESTATUS EQU 03FDH ;REGISTRO DI STATO DELLA LINEA MODEMSTATUS EQU 03FEH ;REGISTRO DI STATO DEL MODEM BAUDRATEDIV DW 0060H ;DIVISOR: LOW=60, HIGH=00 -BAUD =9600 COUNTERCHAR DB 0 ;CHARACTER COUNTER ;DW 256 DUP (?) section .text global _start _start: ;PROGRAMMAZIONE 8250 MOV DX,LINECTRL MOV AL,80H ;BIT 7=1 PER INDIRIZZARE IL BAUD RATE OUT DX,AL MOV DX,BAUDLSB MOV AX,BAUDRATEDIV ;DEFINISCO FATTORE DI DIVISIONE OUT DX,AL MOV DX,BAUDMSB MOV AL,AH OUT DX,AL ;MSB MOV DX,LINECTRL MOV AL,00000011B ;8 BIT DATO, 1 STOP, PARITA' NO OUT DX,AL MOV DX,MODEMCTRL MOV AL,00010011B ;BIT 4=0 PER NO LOOPBACK OUT DX,AL MOV DX,INTENABLE XOR AL,AL ;DISABILITO TUTTI GLI INTERRUPTS OUT DX,AL CICLO: MOV DX,LINESTATUS IN AL,DX ;LEGGO IL REGISTRO DI STATO DELLA LINEA TEST AL,00011110B ;VERIFICO GLI ERRORI (4 TIPI) JNE ERRORI TEST AL,01H ;VERIFICO Rx PRONTO JNE LEGGOCHAR TEST AL,20H ;VERIFICO Tx VUOTO JE CICLO ;SE SI ARRIVA A QUESTO PUNTO ALLORA L'8250 è PRONTO PER TRASMETTERE UN NUOVO CARATTERE MOV AH,1 INT 80H JE CICLO ;SE SI ARRIVA A QUESTO PUNTO SIGNIFICA CHE ESISTE UN CARATTERE DA TASTIERA MOV AH,0 INT 80H ;Al CONTIENE IL CARATTERE DELLA TASTIERA MOV DX,3F8H OUT DX,AL JMP CICLO LEGGOCHAR: MOV AL,[COUNTERCHAR] INC AL CMP AL,15 JE FINE MOV [COUNTERCHAR],AL MOV DX,TXDATA IN AL,DX ;AL CONTIENE IL CARATTERE RICEVUTO AND AL,7FH ;POICHè VI SONO 7 BIT DI DATO ;VISUALIZZAZIONE DEL CARATTERE MOV BX,0 MOV AH,14 INT 80H POP AX CMP AL,0DH ;CONTROLLO SE RETURN JNE CICLO ;CAMBIO RIGA DI VISUALIZZAZIONE MOV AL,0AH MOV BX,0 MOV AH,14 ;INT 10H INT 80H JMP CICLO ;GESTIONE ERRORI ERRORI: MOV DX,3F8H IN AL,DX MOV AL,'?' MOV BX,0 MOV AH,14 INT 80H JMP CICLO FINE: XOR AH,AH MOV AL,03 INT 80H When I compile this code "NASM -f bin UARTLOOP.asm", the compiler can create the UARTLOOP.o file without any error. When I try to link the .o file with "ld UARTLOOP.o" it tells: UARTLOOP.o: In function `_start': UARTLOOP.asm:(.text+0xd): relocation truncated to fit: R_X86_64_16 against `.data' Have u got some ideas to solve this problem? Thx =)

  Read the article

• ffmpeg - How to determine if -movflags faststart is enabled? PHP

  - by IIIOXIII

  While I am able to encode an mp4 file which I can plan on my local windows machine, I am having trouble encoding files to mp4 which are readable when streaming by safari, etc. After a bit of reading, I believe my issue is that I must move the metadata from the end of the file to the beginning in order for the converted mp4 files to be streamable. To that end, I am trying to find out if the build of ffmpeg that I am currently using is able to use the -movflags faststart option through php - as my current outputted mp4 files are not working when streamed online. This is the way I am now echoing the -help, -formats, -codecs, but I am not seeing anything about -movflags faststart in any of the lists: exec($ffmpegPath." -help", $codecArr); for($ii=0;$ii<count($codecArr);$ii++){ echo $codecArr[$ii].'</br>'; } Is there a similar method of determining if -movflags fastart is available to my ffmpeg build? Any other way? Should it be listed with any of the previously suggested commands? -help/-formats? Can someone that knows it is enabled in their version of ffmpeg check to see if it is listed under -help or -formats, etc.? TIA. EDIT: COMPLETE CONSOLE OUTPUT FOR BOTH THE CONVERSION COMMAND AND -MOVFLAGS COMMAND BELOW: COMMAND: ffmpeg_new -i C:\vidtests\Wildlife.wmv -s 640x480 C:\vidtests\Wildlife.mp4 OUTPUT: ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 [asf @ 00000000002ed760] Stream #0: not enough frames to estimate rate; consider increasing probesize Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from 'C:\vidtests\Wildlife.wmv' : Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, fltp , 192 kb/s Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x7 20, 5942 kb/s, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 00000000002e6980] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 00000000002e6980] profile High, level 3.0 [libx264 @ 00000000002e6980] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife.mp4': Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (vc1 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libvo_aacenc) Press [q] to stop, [?] for help frame= 53 fps= 49 q=29.0 size= 0kB time=00:00:00.13 bitrate= 2.9kbits/ frame= 63 fps= 40 q=29.0 size= 0kB time=00:00:00.46 bitrate= 0.8kbits/ frame= 74 fps= 35 q=29.0 size= 0kB time=00:00:00.83 bitrate= 0.5kbits/ frame= 85 fps= 32 q=29.0 size= 0kB time=00:00:01.20 bitrate= 0.3kbits/ frame= 95 fps= 30 q=29.0 size= 0kB time=00:00:01.53 bitrate= 0.3kbits/ frame= 107 fps= 28 q=29.0 size= 0kB time=00:00:01.93 bitrate= 0.2kbits/ Queue input is backward in time [mp4 @ 00000000003ef800] Non-monotonous DTS in output stream 0:1; previous: 7616 , current: 7063; changing to 7617. This may result in incorrect timestamps in th e output file. frame= 118 fps= 28 q=29.0 size= 113kB time=00:00:02.30 bitrate= 402.6kbits/ frame= 129 fps= 26 q=29.0 size= 219kB time=00:00:02.66 bitrate= 670.7kbits/ frame= 141 fps= 26 q=29.0 size= 264kB time=00:00:03.06 bitrate= 704.2kbits/ frame= 152 fps= 25 q=29.0 size= 328kB time=00:00:03.43 bitrate= 782.2kbits/ frame= 163 fps= 25 q=29.0 size= 431kB time=00:00:03.80 bitrate= 928.1kbits/ frame= 174 fps= 24 q=29.0 size= 568kB time=00:00:04.17 bitrate=1116.3kbits/ frame= 190 fps= 25 q=29.0 size= 781kB time=00:00:04.70 bitrate=1359.9kbits/ frame= 204 fps= 25 q=29.0 size= 1006kB time=00:00:05.17 bitrate=1593.1kbits/ frame= 218 fps= 25 q=29.0 size= 1058kB time=00:00:05.63 bitrate=1536.8kbits/ frame= 229 fps= 25 q=29.0 size= 1093kB time=00:00:06.00 bitrate=1490.9kbits/ frame= 239 fps= 24 q=29.0 size= 1118kB time=00:00:06.33 bitrate=1444.4kbits/ frame= 251 fps= 24 q=29.0 size= 1150kB time=00:00:06.74 bitrate=1397.9kbits/ frame= 265 fps= 24 q=29.0 size= 1234kB time=00:00:07.20 bitrate=1402.3kbits/ frame= 278 fps= 25 q=29.0 size= 1332kB time=00:00:07.64 bitrate=1428.3kbits/ frame= 294 fps= 25 q=29.0 size= 1403kB time=00:00:08.17 bitrate=1405.7kbits/ frame= 308 fps= 25 q=29.0 size= 1547kB time=00:00:08.64 bitrate=1466.4kbits/ frame= 323 fps= 25 q=29.0 size= 1595kB time=00:00:09.14 bitrate=1429.5kbits/ frame= 337 fps= 25 q=29.0 size= 1702kB time=00:00:09.60 bitrate=1450.7kbits/ frame= 351 fps= 25 q=29.0 size= 1755kB time=00:00:10.07 bitrate=1427.1kbits/ frame= 365 fps= 25 q=29.0 size= 1820kB time=00:00:10.54 bitrate=1414.1kbits/ frame= 381 fps= 25 q=29.0 size= 1852kB time=00:00:11.07 bitrate=1369.6kbits/ frame= 396 fps= 26 q=29.0 size= 1893kB time=00:00:11.57 bitrate=1339.5kbits/ frame= 409 fps= 26 q=29.0 size= 1923kB time=00:00:12.01 bitrate=1311.8kbits/ frame= 421 fps= 25 q=29.0 size= 1967kB time=00:00:12.41 bitrate=1298.3kbits/ frame= 434 fps= 25 q=29.0 size= 1998kB time=00:00:12.84 bitrate=1274.0kbits/ frame= 445 fps= 25 q=29.0 size= 2018kB time=00:00:13.21 bitrate=1251.3kbits/ frame= 458 fps= 25 q=29.0 size= 2048kB time=00:00:13.64 bitrate=1229.5kbits/ frame= 471 fps= 25 q=29.0 size= 2067kB time=00:00:14.08 bitrate=1202.3kbits/ frame= 484 fps= 25 q=29.0 size= 2189kB time=00:00:14.51 bitrate=1235.5kbits/ frame= 497 fps= 25 q=29.0 size= 2260kB time=00:00:14.94 bitrate=1238.3kbits/ frame= 509 fps= 25 q=29.0 size= 2311kB time=00:00:15.34 bitrate=1233.3kbits/ frame= 523 fps= 25 q=29.0 size= 2429kB time=00:00:15.81 bitrate=1258.1kbits/ frame= 535 fps= 25 q=29.0 size= 2541kB time=00:00:16.21 bitrate=1283.5kbits/ frame= 548 fps= 25 q=29.0 size= 2718kB time=00:00:16.64 bitrate=1337.5kbits/ frame= 560 fps= 25 q=29.0 size= 2845kB time=00:00:17.05 bitrate=1367.1kbits/ frame= 571 fps= 25 q=29.0 size= 2965kB time=00:00:17.41 bitrate=1394.6kbits/ frame= 580 fps= 25 q=29.0 size= 3025kB time=00:00:17.71 bitrate=1398.7kbits/ frame= 588 fps= 25 q=29.0 size= 3098kB time=00:00:17.98 bitrate=1411.1kbits/ frame= 597 fps= 25 q=29.0 size= 3183kB time=00:00:18.28 bitrate=1426.1kbits/ frame= 606 fps= 24 q=29.0 size= 3279kB time=00:00:18.58 bitrate=1445.2kbits/ frame= 616 fps= 24 q=29.0 size= 3441kB time=00:00:18.91 bitrate=1489.9kbits/ frame= 626 fps= 24 q=29.0 size= 3650kB time=00:00:19.25 bitrate=1553.0kbits/ frame= 638 fps= 24 q=29.0 size= 3826kB time=00:00:19.65 bitrate=1594.7kbits/ frame= 649 fps= 24 q=29.0 size= 3950kB time=00:00:20.02 bitrate=1616.3kbits/ frame= 660 fps= 24 q=29.0 size= 4067kB time=00:00:20.38 bitrate=1634.1kbits/ frame= 669 fps= 24 q=29.0 size= 4121kB time=00:00:20.68 bitrate=1631.8kbits/ frame= 682 fps= 24 q=29.0 size= 4274kB time=00:00:21.12 bitrate=1657.9kbits/ frame= 696 fps= 24 q=29.0 size= 4446kB time=00:00:21.58 bitrate=1687.1kbits/ frame= 709 fps= 24 q=29.0 size= 4590kB time=00:00:22.02 bitrate=1707.3kbits/ frame= 719 fps= 24 q=29.0 size= 4772kB time=00:00:22.35 bitrate=1748.5kbits/ frame= 732 fps= 24 q=29.0 size= 4852kB time=00:00:22.78 bitrate=1744.3kbits/ frame= 744 fps= 24 q=29.0 size= 4973kB time=00:00:23.18 bitrate=1756.9kbits/ frame= 756 fps= 24 q=29.0 size= 5099kB time=00:00:23.59 bitrate=1770.8kbits/ frame= 768 fps= 24 q=29.0 size= 5149kB time=00:00:23.99 bitrate=1758.4kbits/ frame= 780 fps= 24 q=29.0 size= 5227kB time=00:00:24.39 bitrate=1755.7kbits/ frame= 797 fps= 24 q=29.0 size= 5377kB time=00:00:24.95 bitrate=1765.0kbits/ frame= 813 fps= 24 q=29.0 size= 5507kB time=00:00:25.49 bitrate=1769.5kbits/ frame= 828 fps= 24 q=29.0 size= 5634kB time=00:00:25.99 bitrate=1775.5kbits/ frame= 843 fps= 24 q=29.0 size= 5701kB time=00:00:26.49 bitrate=1762.9kbits/ frame= 859 fps= 24 q=29.0 size= 5830kB time=00:00:27.02 bitrate=1767.0kbits/ frame= 872 fps= 24 q=29.0 size= 5926kB time=00:00:27.46 bitrate=1767.7kbits/ frame= 888 fps= 24 q=29.0 size= 6014kB time=00:00:27.99 bitrate=1759.7kbits/ frame= 900 fps= 24 q=29.0 size= 6332kB time=00:00:28.39 bitrate=1826.9kbits/ frame= 901 fps= 24 q=-1.0 Lsize= 6717kB time=00:00:30.10 bitrate=1828.0kbits /s video:6211kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.513217% [libx264 @ 00000000002e6980] frame I:8 Avg QP:21.77 size: 39744 [libx264 @ 00000000002e6980] frame P:433 Avg QP:25.69 size: 11490 [libx264 @ 00000000002e6980] frame B:460 Avg QP:29.25 size: 2319 [libx264 @ 00000000002e6980] consecutive B-frames: 5.4% 78.6% 2.7% 13.3% [libx264 @ 00000000002e6980] mb I I16..4: 21.8% 48.8% 29.5% [libx264 @ 00000000002e6980] mb P I16..4: 0.7% 4.0% 1.3% P16..4: 37.1% 22.2 % 15.5% 0.0% 0.0% skip:19.2% [libx264 @ 00000000002e6980] mb B I16..4: 0.1% 0.5% 0.2% B16..8: 43.5% 7.0 % 2.1% direct: 2.2% skip:44.5% L0:36.4% L1:52.7% BI:10.9% [libx264 @ 00000000002e6980] 8x8 transform intra:62.8% inter:56.2% [libx264 @ 00000000002e6980] coded y,uvDC,uvAC intra: 74.2% 78.8% 44.0% inter: 2 3.6% 14.5% 1.0% [libx264 @ 00000000002e6980] i16 v,h,dc,p: 48% 24% 9% 20% [libx264 @ 00000000002e6980] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 17% 15% 7% 8% 11% 8% 10% 8% [libx264 @ 00000000002e6980] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 17% 15% 7% 10% 11% 8% 7% 7% [libx264 @ 00000000002e6980] i8c dc,h,v,p: 53% 21% 18% 7% [libx264 @ 00000000002e6980] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 00000000002e6980] ref P L0: 62.4% 19.0% 12.0% 6.6% 0.0% [libx264 @ 00000000002e6980] ref B L0: 90.5% 8.9% 0.7% [libx264 @ 00000000002e6980] ref B L1: 97.9% 2.1% [libx264 @ 00000000002e6980] kb/s:1692.37 AND THE –MOVFLAGS COMMAND: C:\XSITE\SITE>ffmpeg_new -i C:\vidtests\Wildlife.mp4 -movflags faststart C:\vidtests\Wildlife_fs.mp4 AND THE –MOVFLAGS OUTPUT ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\vidtests\Wildlife.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD encoder : Lavf55.10.100 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball copyright : -¬ 2008 Microsoft Corporation Duration: 00:00:30.13, start: 0.036281, bitrate: 1826 kb/s Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 1692 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 12 8 kb/s Metadata: handler_name : SoundHandler [libx264 @ 0000000004360620] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 0000000004360620] profile High, level 3.0 [libx264 @ 0000000004360620] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife_fs.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Metadata: handler_name : SoundHandler Stream mapping: Stream #0:0 -> #0:0 (h264 -> libx264) Stream #0:1 -> #0:1 (aac -> libvo_aacenc) Press [q] to stop, [?] for help frame= 52 fps=0.0 q=29.0 size= 29kB time=00:00:01.76 bitrate= 133.9kbits/ frame= 63 fps= 60 q=29.0 size= 104kB time=00:00:02.14 bitrate= 397.2kbits/ frame= 74 fps= 47 q=29.0 size= 176kB time=00:00:02.51 bitrate= 573.2kbits/ frame= 87 fps= 41 q=29.0 size= 265kB time=00:00:02.93 bitrate= 741.2kbits/ frame= 101 fps= 37 q=29.0 size= 358kB time=00:00:03.39 bitrate= 862.8kbits/ frame= 113 fps= 34 q=29.0 size= 437kB time=00:00:03.79 bitrate= 943.7kbits/ frame= 125 fps= 33 q=29.0 size= 520kB time=00:00:04.20 bitrate=1012.2kbits/ frame= 138 fps= 32 q=29.0 size= 606kB time=00:00:04.64 bitrate=1069.8kbits/ frame= 151 fps= 31 q=29.0 size= 696kB time=00:00:05.06 bitrate=1124.3kbits/ frame= 163 fps= 30 q=29.0 size= 780kB time=00:00:05.47 bitrate=1166.4kbits/ frame= 176 fps= 30 q=29.0 size= 919kB time=00:00:05.90 bitrate=1273.9kbits/ frame= 196 fps= 31 q=29.0 size= 994kB time=00:00:06.57 bitrate=1237.4kbits/ frame= 213 fps= 31 q=29.0 size= 1097kB time=00:00:07.13 bitrate=1258.8kbits/ frame= 225 fps= 30 q=29.0 size= 1204kB time=00:00:07.53 bitrate=1309.8kbits/ frame= 236 fps= 30 q=29.0 size= 1323kB time=00:00:07.91 bitrate=1369.4kbits/ frame= 249 fps= 29 q=29.0 size= 1451kB time=00:00:08.34 bitrate=1424.6kbits/ frame= 263 fps= 29 q=29.0 size= 1574kB time=00:00:08.82 bitrate=1461.3kbits/ frame= 278 fps= 29 q=29.0 size= 1610kB time=00:00:09.30 bitrate=1416.9kbits/ frame= 296 fps= 30 q=29.0 size= 1655kB time=00:00:09.91 bitrate=1368.0kbits/ frame= 313 fps= 30 q=29.0 size= 1697kB time=00:00:10.48 bitrate=1326.4kbits/ frame= 330 fps= 30 q=29.0 size= 1737kB time=00:00:11.05 bitrate=1286.5kbits/ frame= 345 fps= 30 q=29.0 size= 1776kB time=00:00:11.54 bitrate=1260.4kbits/ frame= 361 fps= 30 q=29.0 size= 1813kB time=00:00:12.07 bitrate=1230.3kbits/ frame= 377 fps= 30 q=29.0 size= 1847kB time=00:00:12.59 bitrate=1201.4kbits/ frame= 395 fps= 30 q=29.0 size= 1880kB time=00:00:13.22 bitrate=1165.0kbits/ frame= 410 fps= 30 q=29.0 size= 1993kB time=00:00:13.72 bitrate=1190.2kbits/ frame= 424 fps= 30 q=29.0 size= 2080kB time=00:00:14.18 bitrate=1201.4kbits/ frame= 439 fps= 30 q=29.0 size= 2166kB time=00:00:14.67 bitrate=1209.4kbits/ frame= 455 fps= 30 q=29.0 size= 2262kB time=00:00:15.21 bitrate=1217.5kbits/ frame= 469 fps= 30 q=29.0 size= 2341kB time=00:00:15.68 bitrate=1223.0kbits/ frame= 484 fps= 30 q=29.0 size= 2430kB time=00:00:16.19 bitrate=1229.1kbits/ frame= 500 fps= 30 q=29.0 size= 2523kB time=00:00:16.71 bitrate=1236.3kbits/ frame= 515 fps= 30 q=29.0 size= 2607kB time=00:00:17.21 bitrate=1240.4kbits/ frame= 531 fps= 30 q=29.0 size= 2681kB time=00:00:17.73 bitrate=1238.2kbits/ frame= 546 fps= 30 q=29.0 size= 2758kB time=00:00:18.24 bitrate=1238.2kbits/ frame= 561 fps= 30 q=29.0 size= 2824kB time=00:00:18.75 bitrate=1233.4kbits/ frame= 576 fps= 30 q=29.0 size= 2955kB time=00:00:19.25 bitrate=1256.8kbits/ frame= 586 fps= 29 q=29.0 size= 3061kB time=00:00:19.59 bitrate=1279.6kbits/ frame= 598 fps= 29 q=29.0 size= 3217kB time=00:00:19.99 bitrate=1318.4kbits/ frame= 610 fps= 29 q=29.0 size= 3354kB time=00:00:20.39 bitrate=1347.2kbits/ frame= 622 fps= 29 q=29.0 size= 3483kB time=00:00:20.78 bitrate=1372.6kbits/ frame= 634 fps= 29 q=29.0 size= 3593kB time=00:00:21.19 bitrate=1388.6kbits/ frame= 648 fps= 29 q=29.0 size= 3708kB time=00:00:21.66 bitrate=1402.3kbits/ frame= 661 fps= 29 q=29.0 size= 3811kB time=00:00:22.08 bitrate=1413.5kbits/ frame= 674 fps= 29 q=29.0 size= 3978kB time=00:00:22.53 bitrate=1446.3kbits/ frame= 690 fps= 29 q=29.0 size= 4133kB time=00:00:23.05 bitrate=1468.4kbits/ frame= 706 fps= 29 q=29.0 size= 4263kB time=00:00:23.58 bitrate=1480.4kbits/ frame= 721 fps= 29 q=29.0 size= 4391kB time=00:00:24.08 bitrate=1493.8kbits/ frame= 735 fps= 29 q=29.0 size= 4524kB time=00:00:24.55 bitrate=1509.4kbits/ frame= 748 fps= 29 q=29.0 size= 4661kB time=00:00:24.98 bitrate=1528.2kbits/ frame= 763 fps= 29 q=29.0 size= 4835kB time=00:00:25.50 bitrate=1553.1kbits/ frame= 778 fps= 29 q=29.0 size= 4993kB time=00:00:25.99 bitrate=1573.6kbits/ frame= 795 fps= 29 q=29.0 size= 5149kB time=00:00:26.56 bitrate=1588.1kbits/ frame= 814 fps= 29 q=29.0 size= 5258kB time=00:00:27.18 bitrate=1584.4kbits/ frame= 833 fps= 29 q=29.0 size= 5368kB time=00:00:27.82 bitrate=1580.2kbits/ frame= 851 fps= 29 q=29.0 size= 5469kB time=00:00:28.43 bitrate=1575.9kbits/ frame= 870 fps= 29 q=29.0 size= 5567kB time=00:00:29.05 bitrate=1569.5kbits/ frame= 889 fps= 29 q=29.0 size= 5688kB time=00:00:29.70 bitrate=1568.4kbits/ Starting second pass: moving header on top of the file frame= 902 fps= 28 q=-1.0 Lsize= 6109kB time=00:00:30.14 bitrate=1659.8kbits /s dup=1 drop=0 video:5602kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.566600% [libx264 @ 0000000004360620] frame I:8 Avg QP:20.52 size: 39667 [libx264 @ 0000000004360620] frame P:419 Avg QP:25.06 size: 10524 [libx264 @ 0000000004360620] frame B:475 Avg QP:29.03 size: 2123 [libx264 @ 0000000004360620] consecutive B-frames: 3.2% 79.6% 0.3% 16.9% [libx264 @ 0000000004360620] mb I I16..4: 20.7% 52.3% 26.9% [libx264 @ 0000000004360620] mb P I16..4: 0.7% 4.2% 1.1% P16..4: 39.4% 21.4 % 13.8% 0.0% 0.0% skip:19.3% [libx264 @ 0000000004360620] mb B I16..4: 0.1% 0.9% 0.3% B16..8: 41.8% 6.4 % 1.7% direct: 1.7% skip:47.1% L0:36.4% L1:53.3% BI:10.3% [libx264 @ 0000000004360620] 8x8 transform intra:65.7% inter:58.8% [libx264 @ 0000000004360620] coded y,uvDC,uvAC intra: 71.2% 76.6% 35.7% inter: 2 0.7% 13.0% 0.5% [libx264 @ 0000000004360620] i16 v,h,dc,p: 48% 24% 8% 20% [libx264 @ 0000000004360620] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 17% 18% 15% 6% 8% 11% 8% 10% 8% [libx264 @ 0000000004360620] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 16% 15% 7% 10% 11% 8% 8% 7% [libx264 @ 0000000004360620] i8c dc,h,v,p: 51% 22% 19% 9% [libx264 @ 0000000004360620] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 0000000004360620] ref P L0: 63.4% 19.7% 11.0% 5.9% 0.0% [libx264 @ 0000000004360620] ref B L0: 90.7% 8.7% 0.7% [libx264 @ 0000000004360620] ref B L1: 98.4% 1.6% [libx264 @ 0000000004360620] kb/s:1524.54

  Read the article

• ASP.Net Web Farm Monitoring

  - by cisellis

  I am looking for suggestions on doing some simple monitoring of an ASP.Net web farm as close to real-time as possible. The objectives of this question are to: Identify the best way to monitor several Windows Server production boxes during short (minutes long) period of ridiculous load Receive near-real-time feedback on a few key metrics about each box. These are simple metrics available via WMI such as CPU, Memory and Disk Paging. I am defining my time constraints as soon as possible with 120 seconds delayed being the absolute upper limit. Monitor whether any given box is up (with "up" being defined as responding web requests in a reasonable amount of time) Here are more details, things I've tried, etc. I am not interested in logging. We have logging solutions in place. I have looked at solutions such as ELMAH which don't provide much in the way of hardware monitoring and are not visible across an entire web farm. ASP.Net Health Monitoring is too broad, focuses too much on logging and is not acceptable for deep analysis. We are on Amazon Web Services and we have looked into CloudWatch. It looks great but messages in the forum indicate that the metrics are often a few minutes behind, with one thread citing 2 minutes as the absolute soonest you could expect to receive the feedback. This would be good to have for later analysis but does not help us real-time Stuff like JetBrains profiler is good for testing but again, not helpful during real-time monitoring. The closest out-of-box solution I've seen is Nagios which is free and appears to measure key indicators on any kind of box, including Windows. However, it appears to require a Linux box to run itself on and a good deal of manual configuration. I'd prefer to not spend my time mining config files and then be up a creek when it fails in production since Linux is not my main (or even secondary) environment. Are there any out-of-box solutions that I am missing? Obviously a windows-based solution that is easy to setup is ideal. I don't require many bells and whistles. In the absence of an out-of-box solution, it seems easy for me to write something simple to handle what I need. I've been thinking a simple client-server setup where the server requests a few WMI metrics from each client over http and sticks them in a database. We could then monitor the metrics via a query or a dashboard or something. If the client doesn't respond, it's effectively down. Any problems with this, best practices, or other ideas? Thanks for any help/feedback.

  Read the article

• CCNet web dashboard not showing anything when MSBuild fails

  - by cfdev9

  I have a simple project in ccnet using svn & msbuild only. There is a 30 second trigger for svn and the msbuild file compiles a web application then copies it to a numbered build folder. When an error occurs in the msbuild task I get a failed build. When I view a failed build in the web dashboard I can see the 'Modifications since last build' section in the dashboard, but nothing else. I have to click on the build log and read through all of the xml in the error log to see what the error was. Why won't the dashboard show the errors from the build log? I haven't changed anything in the dashboard.config since installing ccnet. Dashboard Version : 1.5.7256.1 <project name="SimpleWebapp1"> <artifactDirectory>C:\Program Files\CruiseControl.NET\server\SimpleWebapp1\Artifacts\</artifactDirectory> <triggers> <intervalTrigger name="continuous" seconds="30" buildCondition="IfModificationExists" initialSeconds="5" /> </triggers> <sourcecontrol type="svn"> <executable>C:\Program Files\CollabNet\Subversion Client\svn.exe</executable> <trunkUrl>https://server:8443/svn/SimpleWebapp1/trunk</trunkUrl> <workingDirectory>D:\CCNetSandbox\SimpleWebapp1</workingDirectory> <username>username</username> <password>password</password> </sourcecontrol> <tasks> <msbuild> <executable> C:\WINDOWS\Microsoft.NET\Framework\v3.5\MSBuild.exe </executable> <workingDirectory> D:\CCNetSandbox\SimpleWebapp1 </workingDirectory> <projectFile>SimpleWebapp1.build</projectFile> <buildArgs>/p:Configuration=Debug /p:Platform="Any CPU"</buildArgs> <targets>CompileLatest</targets> <timeout>900</timeout> <logger>ThoughtWorks.CruiseControl.MsBuild.XMLLogger, C:\Program Files\CruiseControl.NET\server\ThoughtWorks.CruiseControl.MsBuild.dll</logger> </msbuild> </tasks> <publishers> <xmllogger /> <buildpublisher> <publishDir>C:\Program Files\CruiseControl.NET\server\SimpleWebapp1\Artifacts\</publishDir> <useLabelSubDirectory>true</useLabelSubDirectory> </buildpublisher> </publishers> </project>

  Read the article

• Run bat file in Java and wait 2

  - by Savvas Dalkitsis

  This is a followup question to my other question : http://stackoverflow.com/questions/2434125/run-bat-file-in-java-and-wait The reason i am posting this as a separate question is that the one i already asked was answered correctly. From some research i did my problem is unique to my case so i decided to create a new question. Please go read that question before continuing with this one as they are closely related. Running the proposed code blocks the program at the waitFor invocation. After some research i found that the waitFor method blocks if your process has output that needs to be proccessed so you should first empty the output stream and the error stream. I did those things but my method still blocks. I then found a suggestion to simply loop while waiting the exitValue method to return the exit value of the process and handle the exception thrown if it is not, pausing for a brief moment as well so as not to consume all the CPU. I did this: import java.io.BufferedReader; import java.io.IOException; import java.io.InputStreamReader; public class Test { public static void main(String[] args) { try { Process p = Runtime.getRuntime().exec( "cmd /k start SQLScriptsToRun.bat" + " -UuserName -Ppassword" + " projectName"); final BufferedReader input = new BufferedReader(new InputStreamReader(p.getInputStream())); final BufferedReader error = new BufferedReader(new InputStreamReader(p.getErrorStream())); new Thread(new Runnable() { @Override public void run() { try { while (input.readLine()!=null) {} } catch (IOException e) { e.printStackTrace(); } } }).start(); new Thread(new Runnable() { @Override public void run() { try { while (error.readLine()!=null) {} } catch (IOException e) { e.printStackTrace(); } } }).start(); int i = 0; boolean finished = false; while (!finished) { try { i = p.exitValue(); finished = true; } catch (IllegalThreadStateException e) { e.printStackTrace(); try { Thread.sleep(500); } catch (InterruptedException e1) { e1.printStackTrace(); } } } System.out.println(i); } catch (IOException e) { e.printStackTrace(); } } } but my process will not end! I keep getting this error: java.lang.IllegalThreadStateException: process has not exited Any ideas as to why my process will not exit? Or do you have any libraries to suggest that handle executing batch files properly and wait until the execution is finished?

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >