Search Results

Search found 26097 results on 1044 pages for 'network share'.

Page 212/1044 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

• set installer background / not able to run early_command in custom preseed file (precise)

  - by user73093

  I have a custom preseed file for a Precise Live CD (which is well loaded on boot, I checked syslog for that). My initial problem is that when booting in install mode (default behavior for a Live CD), ubiquity runs X with a default wallpaper which is hardcoded to /usr/share/backgrounds/warty-final-ubuntu.png in Ubiquity code. So my idea was to run early_command (https://help.ubuntu.com/12.04/installation-guide/i386/preseed-advanced.html) to copy my custom wallpaper over /usr/share/backgrounds/warty-final-ubuntu.png. Assuming my custom wallpaper allready resides on the rootfs in /usr/share/backgrounds. But... It seems the early_command never runs (and I'm sure the preseed file is taken into account) Here is what I have added to my preseed file: d-i preseed/early_command string cp /usr/share/backgrounds/mywallpaper-defaults.jpg /usr/share/backgrounds/warty-final-ubuntu.png Even this one is never run: d-i preseed/early_command string /usr/bin/touch /tmp/testearly Thanks for helping !!

  Read the article

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• AdSense CPM and content topics

  - by Silver Moon

  I run a few blogs on topics like programming, linux tips and network security. I noticed the following: Till last year had only 1 blog that had posts on PHP, linux tips, network security etc. The AdSense RPM was around 1.00. Then I split the content into 3 separate blogs, one focused on web development/PHP/MySQL. second one focused on Linux/Windows how-tos and tips and third one focused on network security and related network topics. The Adsense RPM rose significantly for 2 blogs, and was 1.38 (PHP blog), 0.87 (tech tips blog) and 1.90 (network security blog). In the month of april 2013 the site on network security had the highest traffic and the Adsense income of that site was twice that of all three sites combined previously. My question is simple, does focusing on one topic lead to higher CPC/CPM?

  Read the article

• Can't connect to WIFI after sleep Ubuntu 14.04

  - by user3380404

  After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

  Read the article

• Wireless not working with an Atheros AR9285

  - by Neeraj

  I recently installed Ubuntu 12.04 and found my wireless card is not detected by OS. I tired to detect it by network manager but still it is not get output of the required command: toor@Linux:~$ sudo lshw -class network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:9e:22:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=124.123.227.84 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:f2400000-f243ffff ioport:2000(size=128) *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f2500000-f250ffff and toor@Linux:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no Please let me know what more info is required to resolve it.

  Read the article

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• LXC Container Networking

  - by digitaladdictions

  I just started to experiment with LXC containers. I was able to create a container and start it up but I cannot get dhcp to assign the container an IP address. If I assign a static address the container can ping the host IP but not outside the host IP. The host is CentOS 6.5 and the guest is Ubuntu 14.04LTS. I used the template downloaded by lxc-create -t download -n cn-01 command. If I am trying to get an IP address on the same subnet as the host I don't believe I should need the IP tables rule for masquerading but I added it anyways. Same with IP forwarding. I compiled LXC by hand from the following source https://linuxcontainers.org/downloads/lxc-1.0.4.tar.gz Host Operating System Version #> cat /etc/redhat-release CentOS release 6.5 (Final) #> uname -a Linux localhost.localdomain 2.6.32-431.20.3.el6.x86_64 #1 SMP Thu Jun 19 21:14:45 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Container Config #> cat /usr/local/var/lib/lxc/cn-01/config # Template used to create this container: /usr/local/share/lxc/templates/lxc-download # Parameters passed to the template: # For additional config options, please look at lxc.container.conf(5) # Distribution configuration lxc.include = /usr/local/share/lxc/config/ubuntu.common.conf lxc.arch = x86_64 # Container specific configuration lxc.rootfs = /usr/local/var/lib/lxc/cn-01/rootfs lxc.utsname = cn-01 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 LXC default.confu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:f #> cat /usr/local/etc/lxc/default.conf lxc.network.type = veth lxc.network.link = br0 lxc.network.flags = up #> lxc-checkconfig Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-2.6.32-431.20.3.el6.x86_64 --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: /usr/local/bin/lxc-checkconfig: line 103: [: too many arguments enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: /usr/local/bin/lxc-checkconfig: line 118: [: -gt: unary operator expected Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/local/bin/lxc-checkconfig Network Config (HOST) #> cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes #> cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes TYPE=Ethernet IPV6INIT=no USERCTL=no BRIDGE=br0 #> cat /etc/networks default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 #> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 42:7e:43:b3:61:c5 brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:0c:29:12:30:f2 brd ff:ff:ff:ff:ff:ff inet 10.60.70.121/24 brd 10.60.70.255 scope global br0 inet6 fe80::20c:29ff:fe12:30f2/64 scope link valid_lft forever preferred_lft forever 12: vethT6BGL2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether fe:a1:69:af:50:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::fca1:69ff:feaf:5017/64 scope link valid_lft forever preferred_lft forever #> brctl show bridge name bridge id STP enabled interfaces br0 8000.000c291230f2 no eth0 vethT6BGL2 pan0 8000.000000000000 no #> cat /proc/sys/net/ipv4/ip_forward 1 # Generated by iptables-save v1.4.7 on Fri Jul 11 15:11:36 2014 *nat :PREROUTING ACCEPT [34:6287] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Jul 11 15:11:36 2014 Network Config (Container) #> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp #> ip a s 11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 02:69:fb:42:ee:d7 brd ff:ff:ff:ff:ff:ff inet6 fe80::69:fbff:fe42:eed7/64 scope link valid_lft forever preferred_lft forever 13: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever

  Read the article

• How do I configure IIS to allow access to network resources for PHP scripts?

  - by Dereleased

  I am currently working on a PHP front-end that joins together a series of applications running on separate servers; many of these applications generate files that I need access to, but these files (for various reasons) reside on their parent servers. If I, from the command line, issue a bit of script such as: <?php var_dump(glob("\\\\machine-name\\some\\share\\*")); I will get the full contents of that directory, proving that there's no problem programmatically with PHP reading the contents of a UNC share. However, if I try to execute the same script from the web server, I get an empty array -- more specifically, if I use more explicitly functions designed to "open" a directory like it was a file, I get access errors. I believe this to be a permissions issue, but I am not a server/network administrator type, so I'm not sure what I need to do to correct this and get my script running, and the links I've checked out have not been a terrible amount of help, perhaps due to my background, or lack thereof as far as IIS is concerned, coupled with the fact that we are not actually using .NET for this. Relevant Stats: Windows Server 2008 Standard SP2 IIS 7.0 PHP 5.2.9 I will be connecting to two types of servers: a few other nearly-identical Server 2008 machines, and a machine running embedded XP. Links that have not been particularly helpful but maybe I am just misreading: http://support.microsoft.com/?id=306158 http://support.microsoft.com/kb/207671/EN-US/ http://support.microsoft.com/kb/280383/

  Read the article

• How to run Virtualbox on bridged and host-only networks?

  - by ril44

  I wish to run VirtualBox with my Ubuntu laptop on the home network (so the desktop PC can access it through the router) and also be able to ssh into the VirtualBox from host on the go (different network or with no internet). Previously, the only network adapter on the VB instance was a 'bridged connection' adapter. This allowed me to access the internet on the guest VB and for the other computers on the LAN + host to access it. However, whenever I took my laptop off the network, I could no longer access the guest from host. I read that I needed to enable a host-only adapter to access it off the network and a NAT adapter is used to access the internet from guest. My question is can I run a host-only adapter + a NAT adapter alongside a bridged network adapter in VirtualBox? I am confused what I would put inside /etc/hosts? Would I put both IP's (host-only and bridged) with the same servername in /etc/hosts?

  Read the article

• What's the best subversion client to use for a working copy on a network share that's being modified by other users without a subversion client?

  - by loupai

  That probably sounds confusing. Here's my situation: I have a software project I'd like to version control with Subversion. The project files are on a network share which is modified by several users. I'd like to version control the directory with caveat that many of the users are not going to be using a SVN client when they add, modify, move, and rename files. I'll be doing all the version control myself along with one or two other users. When I commit the changes with an SVN client I'd assume that all changes made to file, all deletions, renames, etc are intentional. So how do I detect these changes if as user made them without using a client like TortoiseSVN? Can anyone recommend a client that could determine possible renames, deletions, and moved files? Thanks!

  Read the article

• RavenDB - Can I create/query an index, from an application that doesn't share the CLR objects that were persisted?

  - by Jaz Lalli

  This post goes some way to answering this question (I'll include the answer later), but I was hoping for some further details. We have a number of applications that each need to access/manipulate data from Raven in their own way. Data is only written via the main web application. Other apps include batch-style tasks, reporting etc. In an attempt to keep each of these as de-coupled as possible, they are separate solutions. That being the case, how can I, from the reporting application, create indexes over the existing data, using my locally defined types? The answer from the linked question states As long as the structure of the classes you are deserializing into partially matches the structure of the data, it shouldn't make a difference. The RavenDB server doesn't care at all what classes you use in the client. You certainly could share a dll, or even share a portable dll if you are targeting a different platform. But you are correct that it is not necessary. However, you should be aware of the Raven-Clr-Type metadata value. The RavenDB client sets this when storing the original document. It is consumed back by the client to assist with deserialization, but it is not fully enforced It's the first part of that that I wanted clarification on. Do the object graphs for the docs on the server and types in my application have to match exactly? If the Click document on the server is { "Visit": { "Version": "0", "Domain": "www.mydomain.com", "Page": "/index", "QueryString": "", "IPAddress": "127.0.0.1", "Guid": "10cb6886-cb5c-46f8-94ed-4b0d45a5e9ca", "MetaData": { "Version": "1", "CreatedDate": "2012-11-09T15:11:03.5669038Z", "UpdatedDate": "2012-11-09T15:11:03.5669038Z", "DeletedDate": null } }, "ResultId": "Results/1", "ProductCode": "280", "MetaData": { "Version": "1", "CreatedDate": "2012-11-09T15:14:26.1332596Z", "UpdatedDate": "2012-11-09T15:14:26.1332596Z", "DeletedDate": null } } Is it possible (and if so, how?), to create a Map index from my application, which defines the Click class as follows? class Click { public Guid Guid {get;set;} public int ProductCode {get;set;} public DateTime CreatedDate {get;set;} } Or would my class have to be look like this? (where the custom types are defined as a sub-set of the properties on the document above, with matching property names) class Click { public Visit Visit {get;set;} public int ProductCode {get;set;} public MetaData MetaData {get;set;} } UPDATE Following on from the answer below, here's the code I managed to get working. Index public class Clicks_ByVisitGuidAndProductCode : AbstractIndexCreationTask { public override IndexDefinition CreateIndexDefinition() { return new IndexDefinition { Map = "from click in docs.Clicks select new {Guid = click.Visit.Guid, ProductCode = click.ProductCode, CreatedDate = click.MetaData.CreatedDate}", TransformResults = "results.Select(click => new {Guid = click.Visit.Guid, ProductCode = click.ProductCode, CreatedDate = click.MetaData.CreatedDate})" }; } } Query var query = _documentSession.Query<ReportClick, Clicks_ByVisitGuidAndProductCode>() .Customize(x => x.WaitForNonStaleResultsAsOfNow()) .Where(x => x.CreatedDate >= start.Date && x.CreatedDate < end.Date); where Click is public class Click { public Guid Guid { get; set; } public int ProductCode { get; set; } public DateTime CreatedDate { get; set; } } Many thanks @MattJohnson.

  Read the article

• "FOR UPDATE" v/s "LOCK IN SHARE MODE" : Allow concurrent threads to read updated "state" value of locked row

  - by shadesco

  I have the following scenario: User X logs in to the application from location lc1: call it Ulc1 User X (has been hacked, or some friend of his knows his login credential, or he just logs in from a different browser on his machine,etc.. u got the point) logs in at the same time from location lc2: call it Ulc2 I am using a main servlet which : - gets a connection from database pooling - sets autocommit to false - executes a command that goes through app layers: if all successful, set autocommit to true in a "finally" statement, and closes connection. Else if an exception happens, rollback(). In my database (mysql/innoDb) i have a "history" table, with row columns: id(primary key) |username | date | topic | locked The column "locked" has by default value "false" and it serves as a flag that marks if a specific row is locked or not. Each row is specific to a user (as u can see from the username column) So back to the scenario: --Ulc1 sends the command to update his history from the db for date "D" and topic "T". --Ulc2 sends the same command to update history from the db for the same date "D" and same topic "T" at the exact same time. I want to implement an mysql/innoDB locking system that will enable whichever thread arriving to do the following check: Is column "locked" for this row true or not? if true, return a message to the user that " he is already updating the same data from another location" if not true (ie not locked) : flag it as locked and update then reset locked to false once finished. Which of these two mysql locking techniques, will actually allow the 2nd arriving thread from reading the "updated" value of the locked column to decide wt action to take?Should i use "FOR UPDATE" or "LOCK IN SHARE MODE"? This scenario explains what i want to accomplish: - Ulc1 thread arrives first: column "locked" is false, set it to true and continue updating process - Ulc2 thread arrives while Ulc1's transaction is still in process, and even though the row is locked through innoDb functionalities, it doesn't have to wait but in fact reads the "new" value of column locked which is "true", and so doesn't in fact have to wait till Ulc1 transaction commits to read the value of the "locked" column(anyway by that time the value of this column will already have been reset to false). I am not very experienced with the 2 types of locking mechanisms, what i understand so far is that LOCK IN SHARE MODE allow other transaction to read the locked row while FOR UPDATE doesn't even allow reading. But does this read gets on the updated value? or the 2nd arriving thread has to wait the first thread to commit to then read the value? Any recommendations about which locking mechanism to use for this scenario is appreciated. Also if there's a better way to "check" if the row has been locked (other than using a true/false column flag) please let me know about it. thank you SOLUTION (Jdbc pseudocode example based on @Darhazer's answer) Table : [ id(primary key) |username | date | topic | locked ] connection.setautocommit(false); //transaction-1 PreparedStatement ps1 = "Select locked from tableName for update where id="key" and locked=false); ps1.executeQuery(); //transaction 2 PreparedStatement ps2 = "Update tableName set locked=true where id="key"; ps2.executeUpdate(); connection.setautocommit(true);// here we allow other transactions threads to see the new value connection.setautocommit(false); //transaction 3 PreparedStatement ps3 = "Update tableName set aField="Sthg" where id="key" And date="D" and topic="T"; ps3.executeUpdate(); // reset locked to false PreparedStatement ps4 = "Update tableName set locked=false where id="key"; ps4.executeUpdate(); //commit connection.setautocommit(true);

  Read the article

• Hundreds of unknown entries in Linux logwatch

  - by Saif Bechan

  I have a dedicated server which runs centos. Today i got an email from loginwatch on my server with hundreds of lines of 'errors'. I don't really know what they are becasue i am fairly new at this. The lines are in a few sections, I will display the first 10 of all of them, i hope someone can help me fix these problems. --------------------- Named Begin ------------------------ **Unmatched Entries** client 216.146.46.136 notify question section contains no SOA: 8 Time(s) client 92.114.98.10 query (cache) 'adobe.com/A/IN' denied: 4 Time(s) network unreachable resolving '11.254.75.75.in-addr.arpa/PTR/IN': 2001:7fd::1#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:13c7:7002:3000::11#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:500:13::c7d4:35#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:500:2e::1#53: 2 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:610:240:0:53::193#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:610:240:0:53::3#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:660:3006:1::1:1#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:6b0:7::2#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:dc0:1:0:4777::140#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:dc0:2001:a:4608::59#53: 1 Time(s) network unreachable resolving '146.250.19.67.in-addr.arpa/PTR/IN': 2001:5a0:10::2#53: 1 Time(s) network unreachable resolving '149.207.106.87.in-addr.arpa/PTR/IN': 2001:7fd::1#53: 1 Time(s) network unreachable resolving '178.62.24.195.in-addr.arpa/PTR/IN': 2001:7fd::1#53: 1 Time(s) this goes on for hundreds of lines with all different domain names. --------------------- pam_unix Begin ------------------------ Failed logins from: 78.86.126.211 (78-86-126-211.zone2.bethere.co.uk): 111 times 93.97.176.136 (93-97-176-136.dsl.cnl.uk.net): 113 times 121.14.145.32: 136 times 190.152.69.5: 248 times 209.160.72.15: 572 times 210.26.48.35: 2 times 212.235.111.224 (DSL212-235-111-224.bb.netvision.net.il): 140 times 218.206.25.29: 140 times Illegal users from: 78.86.126.211 (78-86-126-211.zone2.bethere.co.uk): 2665 times 93.97.176.136 (93-97-176-136.dsl.cnl.uk.net): 2539 times 121.14.145.32: 116 times 190.152.69.5: 34 times 209.160.72.15: 324 times 218.206.25.29: 8051 times proftpd: Unknown Entries: session opened for user cent_ftp by (uid=0): 15 Time(s) session closed for user cent_ftp: 14 Time(s) sshd: Authentication Failures: unknown (218.206.25.29): 8051 Time(s) unknown (78-86-126-211.zone2.bethere.co.uk): 2665 Time(s) unknown (93.97.176.136): 2539 Time(s) root (209.160.72.15): 558 Time(s) unknown (209.160.72.15): 324 Time(s) root (190.152.69.5): 246 Time(s) unknown (121.14.145.32): 116 Time(s) root (121.14.145.32): 106 Time(s) root (dsl212-235-111-224.bb.netvision.net.il): 70 Time(s) root (93.97.176.136): 44 Time(s) root (78-86-126-211.zone2.bethere.co.uk): 37 Time(s) unknown (190.152.69.5): 34 Time(s) mysql (121.14.145.32): 30 Time(s) nobody (218.206.25.29): 26 Time(s) mail (218.206.25.29): 24 Time(s) news (218.206.25.29): 24 Time(s) root (218.206.25.29): 24 Time(s) --------------------- SSHD Begin ------------------------ **Unmatched Entries** pam_succeed_if(sshd:auth): error retrieving information about user tavi : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user pam : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user konchog : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user stavrum : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user rachel : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user affiliates : 24 time(s) pam_succeed_if(sshd:auth): error retrieving information about user nen : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user cobra : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user pass : 7 time(s) pam_succeed_if(sshd:auth): error retrieving information about user hacer : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user chung : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user zainee : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user radu : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user alka : 4 time(s) pam_succeed_if(sshd:auth): error retrieving information about user albert : 5 time(s) pam_succeed_if(sshd:auth): error retrieving information about user turcia : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user cordell : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user silver : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user dragon : 3 time(s) If someone wants to see the whole log i can upload it somewhere. Am i being hacked, what is this all?? I hope someone can help me, this does not look good at all.

  Read the article

• How do I connect my Windows XP laptop to the internet?

  - by rubysiddhi

  Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

  Read the article

• How do I share a WiX fragment in two WiX projects?

  - by Randy Eppinger

  We have a WiX fragment in a file SomeDialog.wxs that prompts the user for some information. It's referenced in another fragment in InstallerUI.wxs file that controls the dialog order. Of course, Product.wxs is our main file. Works great. Now I have a second Visual Studio 2008 Wix 3.0 Project for the .MSI of another application and it needs to ask the user for the same information. I can't seem to figure out the best way to share the file so that changing the information requested will result in both .MSIs getting the new behavior. I honestly can't tell if a merge module, an .wsi (include) or a .wixlib is the right solution. I would have hoped to find a simple example of someone doing this but I have failed thus far. Edit: Based on Rob Mensching's wixlib blog entry, a wixlib may be the answer, but I am still searching for an example of how to do this.

  Read the article

• Android FileOutputStream

  - by zaid

  i am attempting to save an image file using "openFileOutput" and then adding that file to my intent with EXTRA_STREAM. but logcat keeps saying that file size is 0, i have the proper permission in my manifest. FileOutputStream fos = openFileOutput("p001.jpg", Context.MODE_WORLD_READABLE); File jpg = getFileStreamPath("p001.jpg"); fos.close(); Intent share = new Intent(android.content.Intent.ACTION_SEND); share.setType("image/jpeg"); share.putExtra(Intent.EXTRA_SUBJECT, "Fail picture"); share.putExtra(Intent.EXTRA_TEXT, "Epic fail!!!"); share.putExtra(Intent.EXTRA_STREAM, Uri.fromFile(jpg)); startActivity(Intent.createChooser(share, "Choose share method."));

  Read the article

• How do I share a Hibernate SessionFactory across web applications?

  - by Jer

  I have two web applications that are running on a single Tomcat server and are connected to the same database with Hibernate. I am concerned that having two SessionFactory instances running around might cause some issues. Also, since both web applications share much of the same application logic, I thought it would be a good idea to centralize as much as I could. And since I use Spring for DI and Hibernate configuration it would make sense to have a single ApplicationContext as well. How would I go about doing something like this? Do I need to deploy a headless WAR that creates an ApplicationContext and thus a SessionFactory and allow each application access to it? Is this even a good idea?

  Read the article

• How can I share an OnEnter event for a TcxGrid ?

  - by Roland Bengtsson

  I want to standardize the behaviour on an Devexpress TcxGrid. So I have a unit ClientData with a event: procedure TClientData.grdOnEnter(Sender: TObject); begin mnuCxGridStandardMenu.Grid := TcxGrid(Sender); end; If I try to use that event from a TcxGrid.OnEnter event in another unit it refuse to work. If I paste in ClientData.grdOnEnter then a dialog says it is not an valid identifier. Is it possible to share an event for several units in Delphi 2007 ?

  Read the article

• Why can't I share a variable between two content sections in an ASP.NET MVC View?

  - by Dave Van den Eynde

  I have an ASP.NET MVC View with the typical TitleContent and MainContent, with a fairly complicated title that I want to calculate once and then share between these two content sections, like so: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<dynamic>" %> <% var complicatedTitle = string.Format("{0} - {1}", Model.FirstThing, Model.SecondThing); %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> <%: complicatedTitle %> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2><%: complicatedTitle %></h2> </asp:Content> This, however, doesn't work, as the resulting error message would say that only Content controls are allowed directly in a content page that contains Content controls. The calculation definately belongs in the view. How do you solve this problem?

  Read the article

• Mercurial How To Merge 2 Repositories that share a common ancestor but are not clones of the same re

  - by sylvanaar

  I am using hg-subversion, and I have 2 different hg repositories one from our svn trunk, and one from a branch of the trunk. I would like to link them somehow. At some point in the history both Hg repositories will be identical is there some way to join them? In other words is there a way to relate the repositories from within Hg? The technique I am currently using is to just export the second repository over top of the working copy of the revision they share, and then commit that working copy as a branch in Hg, but I lose the history this way. Any advice would be great

  Read the article

• Is it possible to share session state between asp.net aspx page making a call to an asp.net webservi

  - by Greg Balajewicz

  My Situation: I have 1 asp.net application with both aspx pages AND webservices I make calls (using ajax) to the webservice from an aspx page - all within the same asp.net application! Here is my problem/question Is there any way to share the session state? I.e. - the aspx page has a sessionID and the state is being maintained. When the call to the webservice is made, is there a way to automatically send the seesionID to the webservice and then be able to access the same session state from the webservice? -- That would greatly simplify my work! :) Many thanks for your ideas!!

  Read the article

• Uniquely identify two instances of one browser that share Session state?

  - by jdk

  I want to make sure that a user isn't editing the same form data in two different browser tabs or windows (of the same web browser instance). It's to stop the user from stupidly overwriting their own data as they continue through a very long form process. On the server ongoing data input through the screens is collected into the Session. Assume for any browser, all tabs and windows run in the same instance of it (i.e. not each in a separate process). Obviously the browser tabs and windows share the same cookies in this scenario so cookie modification seems out of the question for viable solutions. This is also the reason they shared the same session. Considering that the form is already created and this is one of the final touches, how can I use ASP.NET, hopefully easily, to oversee this "feature"?

  Read the article

• Running .NET app from network share in Win 7?

  - by schooner

  We have a .NET 1.1 application that we keep on a netowork share. We install the .NET Framerwork to the local PCs and also set the full trust via the following: %windir%\Microsoft.NET\Framework\v1.1.4322\caspol -pp off -cg LocalIntranet_Zone FullTrust This has worked fine on all PCs to date however now we have a few new PCs with Win7 and the process no longer is working. The app will run fine from a local drive in Win7 but running the networked copy results in a general exception error. Any ideas on how to get this to work under Win7?

  Read the article

• What's the best way to share one Entity Framework 4 data model among multiple applications (meant to

  - by Ivan

  A project (a "solution" to say in VS terms) of mine consists of an ASP.Net 4 Dynamic Data Entities web application, some WinForms applications, some WPF applications, some services. All they are intended to work with one SQL Server database, generated from an Entity Framework 4 model as table-per-type, with lots of inheritance and multiple self-referencing relations. Where do I best put my model? In a separate class library, a copy in every project, in one project, etc. What naming should I best use? Is it good idea to name it MySolution.MyClassLibrary.MySolutionEntities, or just MySolutionEntities or just MySolution? Can you share any useful experience on this subject?

  Read the article

• Why is it so hard to share resource files (resx) with my Silverlight client?

  - by Jordan

  I'm trying to share a resource file (.resx file) from my web (RIA Service?Silverlight Host) to client (Silverlight) by linking the resource file into my client. When I try to access resources using the ResourceManager object I get the following error: System.Resources.MissingManifestResourceException was caught Message=Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "PPCa.Modules.ProjectManager.Client.ViewModels.ResourceStrings.resources" was correctly embedded or linked into assembly "PPCa.Modules.ProjectManager.Client" at compile time, or that all the satellite assemblies required are loadable and fully signed. StackTrace: at System.Resources.ManifestBasedResourceGroveler.HandleResourceStreamMissing(String fileName) at System.Resources.ManifestBasedResourceGroveler.GrovelForResourceSet(CultureInfo culture, Dictionary`2 localResourceSets, Boolean tryParents, Boolean createIfNotExists, StackCrawlMark& stackMark) at System.Resources.ResourceManager.InternalGetResourceSet(CultureInfo requestedCulture, Boolean createIfNotExists, Boolean tryParents, StackCrawlMark& stackMark) at System.Resources.ResourceManager.InternalGetResourceSet(CultureInfo culture, Boolean createIfNotExists, Boolean tryParents) at System.Resources.ResourceManager.GetString(String name, CultureInfo culture) at System.Resources.ResourceManager.GetString(String name) at PPCa.Modules.ProjectManager.Web.Helpers.ResourceHelper.GetEnumText[TResource](ProjectStatus a_projectStatus) InnerException: Edit: When I say I was linking the resource file, I mean I am using the 'Add as Link' option when adding the existing resx file to my project.

  Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >