Search Results

Search found 10178 results on 408 pages for 'testing metaprogramming'.

Page 212/408 | < Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >

  • iCloud stuff stops working while connected to OpenVPN

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again! (I tried serverfault, it was closed as off-topic. I'm trying here and the Unix site as well. Here because it's a more general audience that might know more about OpenVPN based on the number of questions I see asked about it) EDIT: -I have also tried upgrading to Version: 2.3-beta1-debian0 - issue persists. -Removed all iptables rules except for the ones that flush -left this rule:iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source (server ip) -added iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT still, nothing works. I can see traffic in tcpdump on the server if i watch the tunnel: 20:03:48.702835 IP nk11p01st-courier105-bz.push.apple.com.5223 10.9.8.6.60772: Flags [F.], seq 2635, ack 1218, win 76, options [nop,nop,TS val 914984811 ecr 745921298], length 0 20:03:48.911244 IP 10.9.8.6.60772 nk11p01st-courier105-bz.push.apple.com.5223: Flags [R], seq 3621143451, win 0, length 0 But still, no push messages/notifications are ever delivered. :/ EDIT: * Further testing indicates that it might actually be the client after all.

    Read the article

  • ActiveX component can't create Object Error? Check 64 bit Status

    - by Rick Strahl
    If you're running on IIS 7 and a 64 bit operating system you might run into the following error using ASP classic or ASP.NET with COM interop. In classic ASP applications the error will show up as: ActiveX component can't create object   (Error 429) (actually without error handling the error just shows up as 500 error page) In my case the code that's been giving me problems has been a FoxPro COM object I'd been using to serve banner ads to some of my pages. The code basically looks up banners from a database table and displays them at random. The ASP classic code that uses it looks like this: <% Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> Originally this code had no specific error checking as above so the ASP pages just failed with 500 error pages from the Web server. To find out what the problem is this code is more useful at least for debugging: <% ON ERROR RESUME NEXT Set banner = Server.CreateObject("wwBanner.aspBanner") Response.Write(err.Number & " - " & err.Description) banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> which results in: 429 - ActiveX component can't create object which at least gives you a slight clue. In ASP.NET invoking the same COM object with code like this: <% dynamic banner = wwUtils.CreateComInstance("wwBanner.aspBanner") as dynamic; banner.cBANNERFILE = "wwsitebanners"; Response.Write(banner.getBanner(-1)); %> results in: Retrieving the COM class factory for component with CLSID {B5DCBB81-D5F5-11D2-B85E-00600889F23B} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). The class is in fact registered though and the COM server loads fine from a command prompt or other COM client. This error can be caused by a COM server that doesn't load. It looks like a COM registration error. There are a number of traditional reasons why this error can crop up of course. The server isn't registered (run regserver32 to register a DLL server or /regserver on an EXE server) Access permissions aren't set on the COM server (Web account has to be able to read the DLL ie. Network service) The COM server fails to load during initialization ie. failing during startup One thing I always do to check for COM errors fire up the server in a COM client outside of IIS and ensure that it works there first - it's almost always easier to debug a server outside of the Web environment. In my case I tried the server in Visual FoxPro on the server with: loBanners = CREATEOBJECT("wwBanner.aspBanner") loBanners.cBannerFile = "wwsitebanners" ? loBanners.GetBanner(-1) and it worked just fine. If you don't have a full dev environment on the server you can also use VBScript do the same thing and run the .vbs file from the command prompt: Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" MsgBox(banner.getBanner(-1)) Since this both works it tells me the server is registered and working properly. This leaves startup failures or permissions as the problem. I double checked permissions for the Application Pool and the permissions of the folder where the DLL lives and both are properly set to allow access by the Application Pool impersonated user. Just to be sure I assigned an Admin user to the Application Pool but still no go. So now what? 64 bit Servers Ahoy A couple of weeks back I had set up a few of my Application pools to 64 bit mode. My server is Server 2008 64 bit and by default Application Pools run 64 bit. Originally when I installed the server I set up most of my Application Pools to 32 bit mainly for backwards compatibility. But as more of my code migrates to 64 bit OS's I figured it'd be a good idea to see how well code runs under 64 bit code. The transition has been mostly painless. Until today when I noticed the problem with the code above when scrolling to my IIS logs and noticing a lot of 500 errors on many of my ASP classic pages. The code in question in most of these pages deals with this single simple COM object. It took a while to figure out that the problem is caused by the Application Pool running in 64 bit mode. The issue is that 32 bit COM objects (ie. my old Visual FoxPro COM component) cannot be loaded in a 64 bit Application Pool. The ASP pages using this COM component broke on the day I switched my main Application Pool into 64 bit mode but I didn't find the problem until I searched my logs for errors by pure chance. To fix this is easy enough once you know what the problem is by switching the Application Pool to Enable 32-bit Applications: Once this is done the COM objects started working correctly again. 64 bit ASP and ASP.NET with DCOM Servers This is kind of off topic, but incidentally it's possible to load 32 bit DCOM (out of process) servers from ASP.NET and ASP classic even if those applications run in 64 bit application pools. In fact, in West Wind Web Connection I use this capability to run a 64 bit ASP.NET handler that talks to a 32 bit FoxPro COM server which allows West Wind Web Connection to run in native 64 bit mode without custom configuration (which is actually quite useful). It's probably not a common usage scenario but it's good to know that you can actually access 32 bit COM objects this way from ASP.NET. For West Wind Web Connection this works out well as the DCOM interface only makes one non-chatty call to the backend server that handles all the rest of the request processing. Application Pool Isolation is your Friend For me the recent incident of failure in the classic ASP pages has just been another reminder to be very careful with moving applications to 64 bit operation. There are many little traps when switching to 64 bit that are very difficult to track and test for. I described one issue I had a couple of months ago where one of the default ASP.NET filters was loading the wrong version (32bit instead of 64bit) which was extremely difficult to track down and was caused by a very sneaky configuration switch error (basically 3 different entries for the same ISAPI filter all with different bitness settings). It took me almost a full day to track this down). Recently I've been taken to isolate individual applications into separate Application Pools rather than my past practice of combining many apps into shared AppPools. This is a good practice assuming you have enough memory to make this work. Application Pool isolate provides more modularity and allows me to selectively move applications to 64 bit. The error above came about precisely because I moved one of my most populous app pools to 64 bit and forgot about the minimal COM object use in some of my old pages. It's easy to forget. To 64bit or Not Is it worth it to move to 64 bit? Currently I'd say -not really. In my - admittedly limited - testing I don't see any significant performance increases. In fact 64 bit apps just seem to consume considerably more memory (30-50% more in my pools on average) and performance is minimally improved (less than 5% at the very best) in the load testing I've performed on a couple of sites in both modes. The only real incentive for 64 bit would be applications that require huge data spaces that exceed the 32 bit 4 gigabyte memory limit. However I have a hard time imagining an application that needs 4 gigs of memory in a single Application Pool :-). Curious to hear other opinions on benefits of 64 bit operation. © Rick Strahl, West Wind Technologies, 2005-2011Posted in COM   ASP.NET  FoxPro  

    Read the article

  • Behind ASP.NET MVC Mock Objects

    - by imran_ku07
       Introduction:           I think this sentence now become very familiar to ASP.NET MVC developers that "ASP.NET MVC is designed with testability in mind". But what ASP.NET MVC team did for making applications build with ASP.NET MVC become easily testable? Understanding this is also very important because it gives you some help when designing custom classes. So in this article i will discuss some abstract classes provided by ASP.NET MVC team for the various ASP.NET intrinsic objects, including HttpContext, HttpRequest, and HttpResponse for making these objects as testable. I will also discuss that why it is hard and difficult to test ASP.NET Web Forms.      Description:           Starting from Classic ASP to ASP.NET MVC, ASP.NET Intrinsic objects is extensively used in all form of web application. They provide information about Request, Response, Server, Application and so on. But ASP.NET MVC uses these intrinsic objects in some abstract manner. The reason for this abstraction is to make your application testable. So let see the abstraction.           As we know that ASP.NET MVC uses the same runtime engine as ASP.NET Web Form uses, therefore the first receiver of the request after IIS and aspnet_filter.dll is aspnet_isapi.dll. This will start the application domain. With the application domain up and running, ASP.NET does some initialization and after some initialization it will call Application_Start if it is defined. Then the normal HTTP pipeline event handlers will be executed including both HTTP Modules and global.asax event handlers. One of the HTTP Module is registered by ASP.NET MVC is UrlRoutingModule. The purpose of this module is to match a route defined in global.asax. Every matched route must have IRouteHandler. In default case this is MvcRouteHandler which is responsible for determining the HTTP Handler which returns MvcHandler (which is derived from IHttpHandler). In simple words, Route has MvcRouteHandler which returns MvcHandler which is the IHttpHandler of current request. In between HTTP pipeline events the handler of ASP.NET MVC, MvcHandler.ProcessRequest will be executed and shown as given below,          void IHttpHandler.ProcessRequest(HttpContext context)          {                    this.ProcessRequest(context);          }          protected virtual void ProcessRequest(HttpContext context)          {                    // HttpContextWrapper inherits from HttpContextBase                    HttpContextBase ctxBase = new HttpContextWrapper(context);                    this.ProcessRequest(ctxBase);          }          protected internal virtual void ProcessRequest(HttpContextBase ctxBase)          {                    . . .          }             HttpContextBase is the base class. HttpContextWrapper inherits from HttpContextBase, which is the parent class that include information about a single HTTP request. This is what ASP.NET MVC team did, just wrap old instrinsic HttpContext into HttpContextWrapper object and provide opportunity for other framework to provide their own implementation of HttpContextBase. For example           public class MockHttpContext : HttpContextBase          {                    . . .          }                     As you can see, it is very easy to create your own HttpContext. That's what did the third party mock frameworks like TypeMock, Moq, RhinoMocks, or NMock2 to provide their own implementation of ASP.NET instrinsic objects classes.           The key point to note here is the types of ASP.NET instrinsic objects. In ASP.NET Web Form and ASP.NET MVC. For example in ASP.NET Web Form the type of Request object is HttpRequest (which is sealed) and in ASP.NET MVC the type of Request object is HttpRequestBase. This is one of the reason that makes test in ASP.NET WebForm is difficult. because their is no base class and the HttpRequest class is sealed, therefore it cannot act as a base class to others. On the other side ASP.NET MVC always uses a base class to give a chance to third parties and unit test frameworks to create thier own implementation ASP.NET instrinsic object.           Therefore we can say that in ASP.NET MVC, instrinsic objects are of type base classes (for example HttpContextBase) .Actually these base classes had it's own implementation of same interface as the intrinsic objects it abstracts. It includes only virtual members which simply throws an exception. ASP.NET MVC also provides the corresponding wrapper classes (for example, HttpRequestWrapper) which provides a concrete implementation of the base classes in the form of ASP.NET intrinsic object. Other wrapper classes may be defined by third parties in the form of a mock object for testing purpose.           So we can say that a Request object in ASP.NET MVC may be HttpRequestWrapper or may be MockRequestWrapper(assuming that MockRequestWrapper class is used for testing purpose). Here is list of ASP.NET instrinsic and their implementation in ASP.NET MVC in the form of base and wrapper classes. Base Class Wrapper Class ASP.NET Intrinsic Object Description HttpApplicationStateBase HttpApplicationStateWrapper Application HttpApplicationStateBase abstracts the intrinsic Application object HttpBrowserCapabilitiesBase HttpBrowserCapabilitiesWrapper HttpBrowserCapabilities HttpBrowserCapabilitiesBase abstracts the HttpBrowserCapabilities class HttpCachePolicyBase HttpCachePolicyWrapper HttpCachePolicy HttpCachePolicyBase abstracts the HttpCachePolicy class HttpContextBase HttpContextWrapper HttpContext HttpContextBase abstracts the intrinsic HttpContext object HttpFileCollectionBase HttpFileCollectionWrapper HttpFileCollection HttpFileCollectionBase abstracts the HttpFileCollection class HttpPostedFileBase HttpPostedFileWrapper HttpPostedFile HttpPostedFileBase abstracts the HttpPostedFile class HttpRequestBase HttpRequestWrapper Request HttpRequestBase abstracts the intrinsic Request object HttpResponseBase HttpResponseWrapper Response HttpResponseBase abstracts the intrinsic Response object HttpServerUtilityBase HttpServerUtilityWrapper Server HttpServerUtilityBase abstracts the intrinsic Server object HttpSessionStateBase HttpSessionStateWrapper Session HttpSessionStateBase abstracts the intrinsic Session object HttpStaticObjectsCollectionBase HttpStaticObjectsCollectionWrapper HttpStaticObjectsCollection HttpStaticObjectsCollectionBase abstracts the HttpStaticObjectsCollection class      Summary:           ASP.NET MVC provides a set of abstract classes for ASP.NET instrinsic objects in the form of base classes, allowing someone to create their own implementation. In addition, ASP.NET MVC also provide set of concrete classes in the form of wrapper classes. This design really makes application easier to test and even application may replace concrete implementation with thier own implementation, which makes ASP.NET MVC very flexable.

    Read the article

  • Converting a Visual Studio 2003 Web Project to a Visual Studio 2008 Web Application Project

    - by navaneeth
    This walkthrough describes how to convert a Visual Studio .NET 2002 or Visual Studio .NET 2003 Web project to a Visual Studio 2008 Web application project. The Visual Studio 2008 Web application project model is like the Visual Studio 2005 Web application project model. Therefore, the conversion processes are similar. For more information about Web application projects, see ASP.NET Web Application Projects. You can also convert from a Visual Studio .NET Web project to a Visual Studio 2008 Web site project. However, conversion to a Web application project is the approach that is supported, and gives you the convenience of tools to help with the conversion. For example, when you convert to a Visual Studio 2008 Web application project, you can use the Visual Studio Conversion Wizard to automate part of the process. For information about how to convert a Visual Studio .NET Web project to a Visual Studio 2008 Web site, see Common Web Project Conversion Issues and Solutions. There are two parts involved in converting a Visual Studio 2002 or 2003 Web project to a Visual Studio 2008 Web application project. The parts are as follows: Converting the project. You can use the Visual Studio Conversion Wizard for the initial conversion of the project and Web.config files. You can later use the Convert To Web Application command to update the project's files and structure. Upgrading the .NET Framework version of the project. You must upgrade the project's .NET Framework version to either .NET Framework 2.0 SP1 or to .NET Framework 3.5. This .NET Framework version upgrade is required because Visual Studio 2008 cannot target earlier versions of the .NET Framework. You can perform this upgrade during the project conversion, by using the Conversion Wizard. Alternatively, you can upgrade the .NET Framework version after you convert the project.   NoteYou can change a project's .NET Framework version manually. To do so, in Visual Studio open the property pages for the project, click the Application tab, and then select a new version from the Target Framework list. This walkthrough illustrates the following tasks: Opening the Visual Studio .NET project in Visual Studio 2008 and creating a backup of the project files. Upgrading the .NET Framework version that the project targets. Converting the project file and the Web.config file. Converting ASP.NET code files. Testing the converted project. Prerequisites    To complete this walkthrough, you will need: Visual Studio 2008. A Web site project that was created in Visual Studio .NET version 2002 or 2003 that compiles and runs without errors. Converting the Project and Upgrading the .NET Framework Version    To begin, you open the project in Visual Studio 2008, which starts the conversion. It offers you an opportunity to back up the project before converting it. NoteIt is strongly recommended that you back up the project. The conversion works on the original project files, which cannot be recovered if the conversion is not successful.To convert the project and back up the files In Visual Studio 2008, in the File menu, click Open and then click Project. The Open Project dialog box is displayed. Browse to the folder that contains the project or solution file for the Visual Studio .NET project, select the file, and then click Open. NoteMake sure that you open the project by using the Open Project command. If you use the Open Web Site command, the project will be converted to the Web site project format.The Conversion Wizard opens and prompts you to create a backup before converting the project. To create the backup, click Yes. Click Browse, select the folder in which the backup should be created, and then click Next. Click Finish. The backup starts. NoteThere might be significant delays as the Conversion Wizard copies files, with no updates or progress indicated. Wait until the process finishes before you continue.When the conversion finishes, the wizard prompts you to upgrade the targeted version of the .NET Framework for the project. To upgrade to the .NET Framework 3.5, click Yes. To upgrade the project to target the .NET Framework 2.0 SP1, click No. It is recommended that you leave the check box selected that asks whether you want to upgrade all Webs in the solution. If you upgrade to .NET Framework 3.5, the project's Web.config file is modified at the same time as the project file. When the upgrade and conversion have finished, a message is displayed that indicates that you have completed the first step in converting your project. Click OK. The wizard displays status information about the conversion. Click Close. Testing the Converted Project    After the conversion has finished, you can test the project to make sure that it runs. This will also help you identify code in the project that must be updated. To verify that the project runs If you know about changes that are required for the code to run with the new version of the .NET Framework, make those changes. In the Build menu, click Build. Any missing references or other compilation issues in the project are displayed in the Error List window. The most likely issues are missing assembly references or issues with dynamically generated types. In Solution Explorer, right-click the Web page that will be used to launch the application, and then click Set as Start Page. On the Debug menu, click Start Debugging. If debugging is not enabled, the Debugging Not Enabled dialog box is displayed. Select the option to add a Web.config file that has debugging enabled, and then click OK. Verify that the converted project runs as expected. Do not continue with the conversion process until all build and run-time errors are resolved. Converting ASP.NET Code Files    ASP.NET Web page files and user-control files in Visual Studio 2008 that use the code-behind model have an associated designer file. The files that you just converted will have an associated code-behind file, but no designer file. Therefore, the next step is to generate designer files. NoteOnly ASP.NET Web pages and user controls that have their code in a separate code file require a separate designer file. For pages that have inline code and no associated code file, no designer file will be generated.To convert ASP.NET code files In Solution Explorer, right-click the project node, and then click Convert To Web Application. The files are converted. Verify that the converted code files have a code file and a designer file. Build and run the project to verify the results of the conversion.

    Read the article

  • Michael Crump&rsquo;s notes for 70-563 PRO &ndash; Designing and Developing Windows Applications usi

    - by mbcrump
    TIME TO GO PRO! This is my notes for 70-563 PRO – Designing and Developing Windows Applications using .NET Framework 3.5 I created it using several resources (various certification web sites, msdn, official ms 70-548 book). The reason that I created this review is because a) I am taking the exam. b) MS did not create a book for this exam. Use the(MS 70-548)book. c) To make sure I am familiar with each before the exam. I hope that it provides a good start for your own notes. I hope that someone finds this useful. At least, it will give you a starting point of what to expect to know on the PRO exam. Also, for those wondering, the PRO exam does contains very little code. It is basically all theory. 1. Validation Controls – How to prevent users from entering invalid data on forms. (MaskedTextBox control and RegEx) 2. ServiceController – used to start and control the behavior of existing services. 3. User Feedback (know winforms Status Bar, Tool Tips, Color, Error Provider, Context-Sensitive and Accessibility) 4. Specific (derived) exceptions must be handled before general (base class) exceptions. By moving the exception handling for the base type Exception to after exception handling of ArgumentNullException, all ArgumentNullException thrown by the Helper method will be caught and logged correctly. 5. A heartbeat method is a method exposed by a Web service that allows external applications to check on the status of the service. 6. New users must master key tasks quickly. Giving these tasks context and appropriate detail will help. However, advanced users will demand quicker paths. Shortcuts, accelerators, or toolbar buttons will speed things along for the advanced user. 7. MSBuild uses project files to instruct the build engine what to build and how to build it. MSBuild project files are XML files that adhere to the MSBuild XML schema. The MSBuild project files contain complete file, build action, and dependency information for each individual projects. 8. Evaluating whether or not to fix a bug involves a triage process. You must identify the bug's impact, set the priority, categorize it, and assign a developer. Many times the person doing the triage work will assign the bug to a developer for further investigation. In fact, the workflow for the bug work item inside of Team System supports this step. Developers are often asked to assess the impact of a given bug. This assessment helps the person doing the triage make a decision on how to proceed. When assessing the impact of a bug, you should consider time and resources to fix it, bug risk, and impacts of the bug. 9. In large projects it is generally impossible and unfeasible to fix all bugs because of the impact on schedule and budget. 10. Code reviews should be conducted by a technical lead or a technical peer. 11. Testing Applications 12. WCF Services – application state 13. SQL Server 2005 / 2008 Express Edition – reliable storage of data / Microsoft SQL Server 3.5 Compact Database– used for client computers to retrieve and save data from a shared location. 14. SQL Server 2008 Compact Edition – used for minimum possible memory and can synchronize data with a corporate SQL Server 2008 Database. Supports offline user and minimum dependency on external components. 15. MDI and SDI Forms (specifically IsMDIContainer) 16. GUID – in the case of data warehousing, it is important to define unique keys. 17. Encrypting / Security Data 18. Understanding of Isolated Storage/Proper location to store items 19. LINQ to SQL 20. Multithreaded access 21. ADO.NET Entity Framework model 22. Marshal.ReleaseComObject 23. Common User Interface Layout (ComboBox, ListBox, Listview, MaskedTextBox, TextBox, RichTextBox, SplitContainer, TableLayoutPanel, TabControl) 24. DataSets Class - http://msdn.microsoft.com/en-us/library/system.data.dataset%28VS.71%29.aspx 25. SQL Server 2008 Reporting Services (SSRS) 26. SystemIcons.Shield (Vista UAC) 27. Leverging stored procedures to perform data manipulation for a database schema that can change. 28. DataContext 29. Microsoft Windows Installer Packages, ClickOnce(bootstrapping features), XCopy. 30. Client Application Services – will authenticate users by using the same data source as a ASP.NET web application. 31. SQL Server 2008 Caching 32. StringBuilder 33. Accessibility Guidelines for Windows Applications http://msdn.microsoft.com/en-us/library/ms228004.aspx 34. Logging erros 35. Testing performance related issues. 36. Role Based Security, GenericIdentity and GenericPrincipal 37. System.Net.CookieContainer will store session data for webapps (see isolated storage for winforms) 38. .NET CLR Profiler tool will identify objects that cause performance issues. 39. ADO.NET Synchronization (SyncGroup) 40. Globalization - CultureInfo 41. IDisposable Interface- reports on several questions relating to this. 42. Adding timestamps to determine whether data has changed or not. 43. Converting applications to .NET Framework 3.5 44. MicrosoftReportViewer 45. Composite Controls 46. Windows Vista KNOWN folders. 47. Microsoft Sync Framework 48. TypeConverter -Provides a unified way of converting types of values to other types, as well as for accessing standard values and sub properties. http://msdn.microsoft.com/en-us/library/system.componentmodel.typeconverter.aspx 49. Concurrency control mechanisms The main categories of concurrency control mechanisms are: Optimistic - Delay the checking of whether a transaction meets the isolation rules (e.g., serializability and recoverability) until its end, without blocking any of its (read, write) operations, and then abort a transaction, if the desired rules are violated. Pessimistic - Block operations of a transaction, if they may cause violation of the rules. Semi-optimistic - Block operations in some situations, and do not block in other situations, while delaying rules checking to transaction's end, as done with optimistic. 50. AutoResetEvent 51. Microsoft Messaging Queue (MSMQ) 4.0 52. Bulk imports 53. KeyDown event of controls 54. WPF UI components 55. UI process layer 56. GAC (installing, removing and queuing) 57. Use a local database cache to reduce the network bandwidth used by applications. 58. Sound can easily be annoying and distracting to users, so use it judiciously. Always give users the option to turn sound off. Because a user might have sound off, never convey important information through sound alone.

    Read the article

  • CodePlex Daily Summary for Saturday, May 15, 2010

    CodePlex Daily Summary for Saturday, May 15, 2010New ProjectsBizTalk EDI Guidance: BizTalk EDI Guidance is intended to simplify the delivery of EDI solutions by leveraging the ESB Toolkit. This project is currently Alpha and sh...Continues Integration Sample: I'm providing a series of blog post to show a complete CI process using CruiseControl.Net and msbuild. The source code for this series is hosted here.DioM2D: My Dragons in our Midst RPG. Runs on my custom Starlight Engine.Ethical Hacking ASP.NET: Security tools and guidelines for white-hat hacking and protecting ASP.NET web applications.Farseer Engine with XNATouch: Farseer is great engine for game physics. This implementation uses XNATouch framework.Feature Builder Guidance Extensions: Feature Builder Guidance Extensions are Feature Extensions which extend the guidance for the Feature Building experience. Each FBGX will be suppli...Microsoft Office Document Security: MODS is a plugin for office 2007 thats includes Hash Encryption, Hex Convertion and more. Plugins: MODS For Word still working on (MODS for Excel ...Minimize Engine (XNA): The Minimize Engine is a basic 3D Games Engine created using XNA, with its primary focus around Grid Based games.MSForge TownCrier: This project is meant to build a notification and calling system for MSForge.net User Groups.NatureProtector: Silverlight 4 project.OutSync: OutSync is a free Windows desktop application that syncs photos of your Facebook friends with matching contacts in Microsoft Outlook. It allows you...Quick Save Images, Clipboard save to file, Quick save, bmp, png, jpeg, Image: ClipSa is a very small tool for very quick picture saving. You put some picture into the clipboard (PrintScrn/Alt-PrintScrn/Ctrl-C), ClipSa saves ...ResHelper Manager: Resource strings management tool that creates localization files for any type of localization target (asp.net, wpf and so on...)SecureCookieHttpModule: Secure your session cookie (and other session-based) cookies for replay attacks using this easy to use ASP.NET HttpModule.simpleChMS: A Church Management System (ChMS) designed for churches or ministries like youth groups that want to facilitate better care or theie membership. Fo...sMAPtool: -SPDomainObject: mapping strong type objects to sp listsSQL Trim: This project aims at developing a universal trim function for Microsoft SQL Server. It trims: 1) pre spaces 2) post spaces 3) double spaces 3) subs...TurretGunner: mt-experienceNew ReleasesBeanProxy: BeanProxy 3.0: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class or abstract class can be...Blueset Studio Opensource Projects: 蓝色之风记事本 0.2 Alpha: 一个超级Bug版本……CSharp Intellisense: V2.1: - Bug fix (Pascal Casing)DioM2D: DioM2D0.01: http://www.dragonsinourmidst.com/forums/showthread.php?p=690058#post690058Ethical Hacking ASP.NET: Version 1.0.0.1: This is the initial release of the project. Read more about the available tests and features on the Documentation tab. You need the full .NET Frame...Event Scavenger: Collector service update - version 3.2.4: Added check if the database connection string is set up in the config file.Feature Builder Guidance Extensions: FBGX-Binaries: This release consists of a zip file containing all the VSIXs resulting from building each of the FBGX packages found here as source. This will mak...Floe IRC Client: Floe IRC Client 2010-05 R2: - Detaching windows (right click on the tabs to detach them) - Highlight lines with your nick or other patterns - Fixed several bugs - Tabs can now...Free language translator and file converter: Free Language Translator 1.96: Fixed some minor bugs and improved the UI a bit. If you can not install the msi file you might be missing some prerequisites. You can try running t...Geocache Downloader: release 1.0: This is the first release.kp.net: Alpha release is avalable: The goal of this alpha release is to try the code in some production scenarios and find out what features should be tuned.Live-Exchange Calendar Sync: Live-Exchange Calendar Sync: Live-Exchange Calendar Sync Beta May 14, 2010 release of Live-Exchange Calendar Sync 1.0 BETA. (Version 45334) Getting StartedInfo about installat...MAPILab Explorer for SharePoint: MAPILab Explorer for SharePoint ver 2.1.1: 1) Small bug fixed that appears on first start (when earliers versions wasn't installed). How to install:Download ZIP file and extract it on Sha...Microsoft Office Document Security: MODS 4 WORD (SOURCE INCLUDED): Includes Source CodeMoonyDesk (windows desktop widgets): MoonyDesk Alpha: MoonyDesk Alpha (some memory improvements)OnTopReplica: Release 2.9.3: Some bugfixes and improvements. Czech translation added (thanks René Mihula).OutSync: OutSync v1.0.100.0: OutSync v1.0.100.0 is the final release by Mel before the move to CodePlex. I have tested it on Windows 7 32bit and 64bit with Office 2007 and it ...Quick Save Images, Clipboard save to file, Quick save, bmp, png, jpeg, Image: Clipsa v 0.1: Download and extract to any place 2 files - clipSa.exe and clipSa.exe.config Run clipSa.exe. That's all.ResHelper Manager: ResHelperManager: List of changes applied to this version of ResHelper is included in main download zip package. Example sourcesIn Source Code tab are sources of De...Rx Contrib: V1.3: - Bug Fix - BufferWithTimeOrCount with flexible time period setting when ever the time period elapsed...SharePoint DVK Integration: SharePoint 2007 DVK integration v1.0.3: Fixes Fixed default field bindings. I rebound too many fields on every page load. Fixed extension replacing on creating target url (threw it out)...ShoutcastStast for DotNetNuke: DNN_ShoutcastStats alpha 05.00.495: First Alpha release of ShoutcastStats Module for DotNetNuke This first alpha version of the ShoutcastStats Module for DotNetNuke is still in devel...SilverPart 2.1: SilverPart 2.1: SilverPart 2.1 This interim release fixes some major bugs related to Firefox and anonymous access. - Fix for Issue ID 4005 - SilverPart does not w...sMAPtool: sMAPedit v0.7c (Base Release with Maps): Fixed: force a gargabe collection update to prevent pictureBox's memory leak Added: essential map pack with all basic maps in jpg format Added:...SQL Trim: Trim: Initial releaseSSIS Multiple Hash: Multiple Hash V1.2.1: This is version 1.2.1 of the Multiple Hash SSIS Component. It supports SQL 2005 and SQL 2008, although you have to download the correct install pa...StreamInsight Yahoo Finance input adapter example: StockTicker_v1_0_RTM: Updated for StreamInsight RTM.Update Controls .NET: 2.1.0.0: Automatic dependency management for WPF and Silverlight data binding. This release combines both the WPF and Silverlight assemblies into one insta...VCC: Latest build, v2.1.30514.0: Automatic drop of latest buildMost Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemRawrPHPExcelBlogEngine.NETMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersShake - C# MakeStyleCop

    Read the article

  • CodePlex Daily Summary for Saturday, March 27, 2010

    CodePlex Daily Summary for Saturday, March 27, 2010New ProjectsAlter gear SQL index Management: SQL Index management displays a list of indexes available for the chosen database and allows you to select an individual / group of indexes to be r...ASP League Ladder System: An ASP ladder / league system for online gaming league or real life leagues also.Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator is a software suite to promote computer aided strategy planning. Sports team can visualize their strategy usin...Boo syntax highlighting for Visual Studio 2010: Simple syntax hightlighting VSX add-in for Boo language in Visual Studio 2010.easySan: easySan zur einfachen Mitgliedsverwaltung im BRKFsUnit: FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework.Laughing Dog XNA Framework: Laughing Dog is a simple to use, component based 2D framework for XNA game development. At present it is very early in development and as such is f...miniTodo: WPFでMVVMの練習にてきとうに作ったTODOアプリ 実用は無理です。My Common Library on .NET with CSharp: My Common Library on .NET with CSharp, it conclude database assecc, encrypt string, data caching, StringUtility, thank you for your view.Native code wrapping using c# : fsutil sparse commands: Ever thought about creating HUGE FILES for future use but felt bad for the wasted memory? Well, SPARSE FILES are the ANSWER! This FSUTIL SPARSE CO...Open SOA Platform: A centralized system for administering applications throught a SOA Enterprise Service Bus: Runtime environment (PROD, DEV, ...) , application and s...P-DBMS: Network and Database ProjectPraiseSight: PraiseSight is supposed to become a practical tool for churches to catalog an present their songs, lyrics and presentations on a beamer. The soluti...Pretty Good Frontend: Pretty Good Frontend is a sample frontend for ConfigMgr (SCCM) 2007 and MDT 2010 Zero Touch. S3Appender (Appender for Log4Net that Uses Amazon S3 For Storing Log Files): The S3Appender is a log4net appender that stores log events in either a MemoryStream or FileStream and sends them to S3 based on time intervals and...sEmit: sEmit (sms emitter) is an application written in C# which was built to send text messages. The project was founded in May 2009 by cansik. It works ...Silverlight RIA Tools: A tool set that generates a full RIA Solutions in Silverlightthommo cannon: Cannon for shooting down ThommosTianjin Polytechnic University Online Judge: Online Judge System Built on Microsoft technologies. Vision & Scope: A distributed OJ Solution on Windows and Cloud. Technologies used or planed...Tinare: Tinare is an byte encryption and decryption alogrithm. The input key is a string password.TinyPlug: Small Plugin Manager, written in C# Allows a project to define supported interfaces, and at runtime add plugins which support (inherit) these in...Utility niconv helps to convert text from one encoding to another: .NET implementation of GUN iconv console converter utility. The niconv program converts text from one encoding to another encoding. In the future r...WareFeed - Software Business Analytics: WareFeed is a simple but effective Software Business Analytics tool written in PHP and compatible others languages such as .NET, Java or Python. It...Y36API1: Semestralni projekt na Y36APINew ReleasesAlter gear SQL index Management: Setup 1.0.0: setup for first alpha releaseASP League Ladder System: ASPLeagueRelease_0_4_1: Release v 0.41Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator: Version 1.0 InstallerAutoAudit: AutoAudit 1.10e: Version 1.10e will be the final iteration of version 1 development. Version 2 will begin adding switches and options. Pleae email your suggestio...Boo syntax highlighting for Visual Studio 2010: Boo syntax VS 2010 - alpha: First release TODO: Multiline comments!Chargify.NET: Chargify.NET 0.6: Updated library, using Metered Components and updated Product information.Composer: V1.0.326.1000 Alpha: Initial Alpha release. Should be stable, with minor issues.CoNatural Components: CoNatural Components 1.6: Code fixes: Created helper classes to generate source code for type mapper/materializer. Fixed issue in optimized type materializer when loading ...CRM External View: 1.2: New Features in v1.2 release Password protected views. No more using Web Data Access role from v1. Filtering capabilities Caching for performan...Designit Video Embed Package: Release 1.1.0 beta1: You can now either have the video embeded directly in the template or have a preview in template that opens the video in a lightbox window.FsUnit: FsUnit 0.9.0 for NUnit: This release is for F# 2.0 and NUnit 2.5+.Laughing Dog XNA Framework: Laughing Dog 0.0.1: Laughing Dog - Alpla - v 0.0.1 First released version of the Laughing Dog framework.LiveUpload to Facebook: LiveUpload to Facebook 3.2: Version 3.2Become a fan on Facebook! Features Quickly and easily upload your photos and videos to Facebook, including any people tags added in Win...MapWindow6: MapWindow 6.0 msi March 26: This version adds the Join feature for creating a new "featureset" with attributes that are joined with attributes from a Excel data label named 'D...Mobile Broadband Logging Monitor: Mobile Broadband Logging Monitor 1.2.2: This edition supports: Newer and older editions of Birdstep Technology's EasyConnect HUAWEI Mobile Partner MWConn User defined location for s...Multiplayer Quiz: Release 1_6_351_0: A beta release of the next version. Please leave any errors in discussions or comments.Native code wrapping using c# : fsutil sparse commands: Fsutil sparse file native code - c sharp wrapper: Project Description A C# code wrapping a native code-Sparse files1 The code is about SPARSE files- the abillity to create huge files (for future us...Nice Libraries: 1.30 build 50325.01: Release 1.30 build 50325.01Pretty Good Frontend: Pretty Good Frontend binaries v1.0: This is the first public release of the Pretty Good Frontend binariesPylor: Pylor 0.1 alpha: This is the very first published version. I hope I can put a sample project soon.Quick Performance Monitor: Version 1.1 refresh: There was a typo or two in the sample batch file. Corrected now.Rapidshare Episode Downloader: RED v0.8.3: 0.8.1 introduced the ability to advance to the next episode. In 0.8.2 a bug was found that if episode number is less then 10, then the preceding 0...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.52: RapidWebDev is an infrastructure helps to develop enterprise software solutions in Microsoft .NET easily and productively. This is the release vers...thommo cannon: game: gamethommo cannon: setup: setupthommo cannon: test: testTinare: Tinare DLL: Tinare DLL is a dynamic-link library written in C# which provides the functions to encrypt and decrypt a byte stream with tinare.WeatherBar: WeatherBar 2.1 [No Installation]: Minor changes to release 2.0 (http://weatherbar.codeplex.com/releases/view/42490). Fixed the bug that caused an exception to be thrown if the user...Most Popular ProjectsMetaSharpRawrWBFS ManagerASP.NET Ajax LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationFarseer Physics Enginepatterns & practices: Composite WPF and SilverlightLINQ to TwitterTable2ClassFluent Ribbon Control SuiteNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • CodePlex Daily Summary for Sunday, May 16, 2010

    CodePlex Daily Summary for Sunday, May 16, 2010New Projects3D Calculator: 3D Calc is a simple calculator application for Windows Phone 7, the purpose of this project is to demo the 3D animations capabilities of WP7 and sh...azaleas: AzaleasBlueset Studio Opensource Projects: Only for Opensource projects form Blueset Studio.Breck: A Phoenix and Jumper Moneky Production: Breck is a first person non-violent shooter developed in C++ and Dark GDK. After the main game is developed we are looking into making a sequel or...Discuz! Forum SDK: This project is use to login in and post or reply topic on discuz forum.Dominion.NET: Evolving Dominion source code originally written in VB6 and posted by "jatill" on Collectible Card Game Headquarters. Migration of the design and s...EkspSys2010-ITR: A mini project for the course Experimental System devolopment in spring 2010Facebook Graph Toolkit: This project is a .Net implementation of the Facebook Graph API. The aim of this project is to be a replacement to the existing Facebook Toolkit (h...iFree: This is a solution for Vietnamese network socialInfoPath Editor for Developer: InfoPath Editor for developer allows user to modify the html text directly inside InfoPath designer or filler and push the change back to InfoPath ...iZeit: Run your own online calendar, with blog integration, recurrence, todo list and categories.machgos dotNet Tests: Just some little test-projects for learningmim: TBAMinePost: MinePost is a game made for the first 48 hour Reddit Game Jam.Mockina: Mockina is a mock framework. Expression tree syntax is used to specify which members to mock, both public and non-public. The code is easy to under...MSBuild Launch Pad (mPad): This is just another shell extension for MSBuild to enable quick execution of MSBuild scripts via Windows Explorer context menu. (C) 2010 Lex LiPeacock: A browser like tabbed applicationPrimeCalculation: PrimeCalculation is a .NET app to calculate primes in a given range. Speed on Core2Duo 2,4GHZ: Found all primes from 0 to 1 billion in 35 seconds (...Slightly Silverlight: A Framework that leverages Silverlight for processing, business logic but standard HTML for the presentation layer.Stopwatch: Stopwatch is a tool for measuring the time. To start and pause stopwatch you only need to press a key on the keyboard. An additional context menu a...YAXLib: Yet Another XML Serialization Library for the .NET Framework: YAXLib is an XML Serialization library which helps you structure freely the XML result, choose among private and public fields to be serialized, an...New ReleasesActivate Your Glutes: v1.0.3.0: This release is a migration to VS2010, .Net 4, MVC2 and Entity Framework 4. The code has also been considerably cleaned up - taking advantage of E...AnyCAD: AnyCAD.Free.ENU.v1.1: http://www.anycad.net Modeling •2D: Line, Rectangle, Arc, Arch, Circle, Spline, Polygon •Feature: Extrude, Loft, Chamfer, Sweep, Revol •Boolean: ...Blueset Studio Opensource Projects: 多功能计算器 3.5: 稳定版本。Code for Rapid C# Windows Development eBook: LLBLGen LINQPad Data Context Driver Ver 1.0.0.0: First release of a Static LLBLGen Pro Data Context Driver for LINQPad I recommend LINQPad 4 as it seems more stable with this driver than LINQPad 2.DSQLT - Dynamic SQL Templates: Release 1.2. Some behaviour has changed!!: Attention. Some behaviour has changed! Now its necessary to use WildCards in the pattern-parameter for DSQLT.AllSourceContains DSQLT.Databases DSQ...FDS AutoCAD plug-in: FDS to AutoCAD plug-in: Basic functionality was implemented. Some routines like setting fds executable location are still not automated.Feature Builder Guidance Extensions: FBGX 2 - Standalone FX: Background: The Feature Builder Guidance is extensible and displays guidance content supplied by all the Feature Builder Guidance Extensions (FBGX...Floe IRC Client: Floe IRC Client 2010-05 R3: - You can now right click on the input box to get options for toggling bold, underline, colors, etc. - The size of the nickname column is now saved...Floe IRC Client: Floe IRC Client 2010-05 R4: - A user's channel status now appears next to their nick when they talk (e.g. @Nick or +Nick) - Fixed an error where certain kinds of network probl...HD-Trailers.NET Downloader: HD-Trailers.NET Downloader v1.0: Version 1.0 Thanks to Wolfgang for all his help. I let this project languish for too long while focusing on other things, but his involvement has ...InfoPath Editor for Developer: InfoPath Editor Beta 1: Intial Release: Can load InfoPath inner html. Can edit InfoPath inner html. InfoPath 2007 only.LinkSharp: LinkSharp 0.1.0: First release of LinkSharp. Set up iis, and use the sql script to create a new database.PowerAuras: PowerAuras V3.0.0F: This version adds better integration with GTFO New Flags Added PvP flag In 5-Man Instance In Raid Instance In Battleground In ArenaRx Contrib: V1.4: Add the ability to catch internal exception and the ability to publish error by queue adaptersSEO SiteMap: SEO SiteMap RC1: -SevenZipLib Library: v9.13.2: Stable release associated with 7z.dll 9.13 beta. Ability to create and update archives not implemente yet.Silverlight / WPF Controls: Upload, FlipPanel, DeepZoom, Animation, Encryption: Code Camp Demonstration: This code example demonstrates MVVM/MEF with WPF with attached properties,security and custom ICommand class.SQL Data Capture - Black Box Application Testing: SQLDataCapture V1.2: Added Entity Framework Support to CRUD generator (Insert Stored Procedure) and switched to VS 2010 for development.Stopwatch: Stopwatch 0.1: Stopwatch Release 0.1VCC: Latest build, v2.1.30515.0: Automatic drop of latest buildYet another developer blog - Examples: Asynchronous TreeView in ASP.NET MVC: This sample application shows how to use jQuery TreeView plugin for creating an asynchronous TreeView in ASP.NET MVC. This application is accompani...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrPHPExcelBlogEngine.NETMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersMirror Testing SystemN2 CMSStyleCop

    Read the article

  • MySQL Cluster 7.2: Over 8x Higher Performance than Cluster 7.1

    - by Mat Keep
    0 0 1 893 5092 Homework 42 11 5974 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Summary The scalability enhancements delivered by extensions to multi-threaded data nodes enables MySQL Cluster 7.2 to deliver over 8x higher performance than the previous MySQL Cluster 7.1 release on a recent benchmark What’s New in MySQL Cluster 7.2 MySQL Cluster 7.2 was released as GA (Generally Available) in February 2012, delivering many enhancements to performance on complex queries, new NoSQL Key / Value API, cross-data center replication and ease-of-use. These enhancements are summarized in the Figure below, and detailed in the MySQL Cluster New Features whitepaper Figure 1: Next Generation Web Services, Cross Data Center Replication and Ease-of-Use Once of the key enhancements delivered in MySQL Cluster 7.2 is extensions made to the multi-threading processes of the data nodes. Multi-Threaded Data Node Extensions The MySQL Cluster 7.2 data node is now functionally divided into seven thread types: 1) Local Data Manager threads (ldm). Note – these are sometimes also called LQH threads. 2) Transaction Coordinator threads (tc) 3) Asynchronous Replication threads (rep) 4) Schema Management threads (main) 5) Network receiver threads (recv) 6) Network send threads (send) 7) IO threads Each of these thread types are discussed in more detail below. MySQL Cluster 7.2 increases the maximum number of LDM threads from 4 to 16. The LDM contains the actual data, which means that when using 16 threads the data is more heavily partitioned (this is automatic in MySQL Cluster). Each LDM thread maintains its own set of data partitions, index partitions and REDO log. The number of LDM partitions per data node is not dynamically configurable, but it is possible, however, to map more than one partition onto each LDM thread, providing flexibility in modifying the number of LDM threads. The TC domain stores the state of in-flight transactions. This means that every new transaction can easily be assigned to a new TC thread. Testing has shown that in most cases 1 TC thread per 2 LDM threads is sufficient, and in many cases even 1 TC thread per 4 LDM threads is also acceptable. Testing also demonstrated that in some instances where the workload needed to sustain very high update loads it is necessary to configure 3 to 4 TC threads per 4 LDM threads. In the previous MySQL Cluster 7.1 release, only one TC thread was available. This limit has been increased to 16 TC threads in MySQL Cluster 7.2. The TC domain also manages the Adaptive Query Localization functionality introduced in MySQL Cluster 7.2 that significantly enhanced complex query performance by pushing JOIN operations down to the data nodes. Asynchronous Replication was separated into its own thread with the release of MySQL Cluster 7.1, and has not been modified in the latest 7.2 release. To scale the number of TC threads, it was necessary to separate the Schema Management domain from the TC domain. The schema management thread has little load, so is implemented with a single thread. The Network receiver domain was bound to 1 thread in MySQL Cluster 7.1. With the increase of threads in MySQL Cluster 7.2 it is also necessary to increase the number of recv threads to 8. This enables each receive thread to service one or more sockets used to communicate with other nodes the Cluster. The Network send thread is a new thread type introduced in MySQL Cluster 7.2. Previously other threads handled the sending operations themselves, which can provide for lower latency. To achieve highest throughput however, it has been necessary to create dedicated send threads, of which 8 can be configured. It is still possible to configure MySQL Cluster 7.2 to a legacy mode that does not use any of the send threads – useful for those workloads that are most sensitive to latency. The IO Thread is the final thread type and there have been no changes to this domain in MySQL Cluster 7.2. Multiple IO threads were already available, which could be configured to either one thread per open file, or to a fixed number of IO threads that handle the IO traffic. Except when using compression on disk, the IO threads typically have a very light load. Benchmarking the Scalability Enhancements The scalability enhancements discussed above have made it possible to scale CPU usage of each data node to more than 5x of that possible in MySQL Cluster 7.1. In addition, a number of bottlenecks have been removed, making it possible to scale data node performance by even more than 5x. Figure 2: MySQL Cluster 7.2 Delivers 8.4x Higher Performance than 7.1 The flexAsynch benchmark was used to compare MySQL Cluster 7.2 performance to 7.1 across an 8-node Intel Xeon x5670-based cluster of dual socket commodity servers (6 cores each). As the results demonstrate, MySQL Cluster 7.2 delivers over 8x higher performance per data nodes than MySQL Cluster 7.1. More details of this and other benchmarks will be published in a new whitepaper – coming soon, so stay tuned! In a following blog post, I’ll provide recommendations on optimum thread configurations for different types of server processor. You can also learn more from the Best Practices Guide to Optimizing Performance of MySQL Cluster Conclusion MySQL Cluster has achieved a range of impressive benchmark results, and set in context with the previous 7.1 release, is able to deliver over 8x higher performance per node. As a result, the multi-threaded data node extensions not only serve to increase performance of MySQL Cluster, they also enable users to achieve significantly improved levels of utilization from current and future generations of massively multi-core, multi-thread processor designs.

    Read the article

  • C#: Does an IDisposable in a Halted Iterator Dispose?

    - by James Michael Hare
    If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14:  15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21:  22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6:  7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12:  13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21:  22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9:  10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19:  20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23:  24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

    Read the article

  • .NET to iOS: From WinForms to the iPad

    - by RobertChipperfield
    One of the great things about working at Red Gate is getting to play with new technology - and right now, that means mobile. A few weeks ago, we decided that a little research into the tablet computing arena was due, and purely from a numbers point of view, that suggested the iPad as a good target device. A quick trip to iPhoneDevCon in San Diego later, and Marine and I came back full of ideas, and with some concept of how iOS development was meant to work. Here's how we went from there to the release of Stacks & Heaps, our geeky take on the classic "Snakes & Ladders" game. Step 1: Buy a Mac I've played with many operating systems in my time: from the original BBC Model B, through DOS, Windows, Linux, and others, but I'd so far managed to avoid buying fruit-flavoured computer hardware! If you want to develop for the iPhone, iPad or iPod Touch, that's the first thing that needs to change. If you've not used OS X before, the first thing you'll realise is that everything is different! In the interests of avoiding a flame war in the comments section, I'll only go so far as to say that a lot of my Windows-flavoured muscle memory no longer worked. If you're in the UK, you'll also realise your keyboard is lacking a # key, and that " and @ are the other way around from normal. The wonderful Ukelele keyboard layout editor restores some sanity here, as long as you don't look at the keyboard when you're typing. I couldn't give up the PC entirely, but a handy application called Synergy comes to the rescue - it lets you share a single keyboard and mouse between multiple machines. There's a few limitations: Alt-Tab always seems to go to the Mac, and Windows 7's UAC dialogs require the local mouse for security reasons, but it gets you a long way at least. Step 2: Register as an Apple Developer You can register as an Apple Developer free of charge, and that lets you download XCode and the iOS SDK. You also get the iPhone / iPad emulator, which is handy, since you'll need to be a paid member before you can deploy your apps to a real device. You can either enroll as an individual, or as a company. They both cost the same ($99/year), but there's a few differences between them. If you register as a company, you can add multiple developers to your team (all for the same $99 - not $99 per developer), and you get to use your company name in the App Store. However, you'll need to send off significantly more documentation to Apple, and I suspect the process takes rather longer than for an individual, where they just need to verify some credit card details. Here's a tip: if you're registering as a company, do so as early as possible. The approval process can take a while to complete, so get the application in in plenty of time. Step 3: Learn to love the square brackets! Objective-C is the language of the iPad. C and C++ are also supported, and if you're doing some serious game development, you'll probably spend most of your time in C++ talking OpenGL, but for forms-based apps, you'll be interacting with a lot of the Objective-C SDK. Like shifting from Ctrl-C to Cmd-C, it feels a little odd at first, with the familiar string.format(.) turning into: NSString *myString = [NSString stringWithFormat:@"Hello world, it's %@", [NSDate date]]; Thankfully XCode's auto-complete is normally passable, if not up to Visual Studio's standards, which coupled with a huge amount of content on Stack Overflow means you'll soon get to grips with the API. You'll need to get used to some terminology changes, though; here's an incomplete approximation: Coming from a .NET background, there's some luxuries you no longer have developing Objective C in XCode: Generics! Remember back in .NET 1.1, when all collections were just objects? Yup, we're back there now. ReSharper. Or, more generally, very much refactoring support. The not-many-keystrokes to rename a class, its file, and al references to it in Visual Studio turns into a much more painful experience in XCode. Garbage collection. This is actually rather less of an issue than you might expect: if you follow the rules, the reference counting provided by Objective C gets you a long way without too much pain. Circular references are their usual problematic self, though. Decent exception handling. You do have exceptions, but they're nowhere near as widely used. Generally, if something goes wrong, you get nil (see translation table above) back. Which brings me on to. Calling a method on a nil object isn't a failure - it just returns nil itself! There's many arguments for and against this, but personally I fall into the "stuff should fail as quickly and explicitly as possible" camp. Less specifically, I found that there's more chance of code failing at runtime rather than getting caught at compile-time: using the @selector(.) syntax to pass a method signature isn't (can't be) checked at compile-time, so the first you know about a typo is a crash when you try and call it. The solution to this is of course lots of great testing, both automated and manual, but I still find comfort in provably correct type safety being enforced in addition to testing. Step 4: Submit to the App Store Assuming you want to distribute to more than a handful of devices, you're going to need to submit your app to the Apple App Store. There's a few gotchas in terms of getting builds signed with the right certificates, and you'll be bouncing around between XCode and iTunes Connect a fair bit, but eventually you get everything checked off the to-do list, and are ready to upload your first binary! With some amount of anticipation, I pressed the Upload button in XCode, ready to release our creation into the world, but was instead greeted by an error informing me my XML file was malformed. Uh. A little Googling later, and it turned out that a simple rename from "Stacks&Heaps.app" to "StacksAndHeaps.app" worked around an XML escaping bug, and we were good to go. The next step is to wait for approval (or otherwise). After a couple of weeks of intensive development, this part is agonising. Did we make it? The Apple jury is still out at the moment, but our fingers are firmly crossed! In the meantime, you can see some screenshots and leave us your email address if you'd like us to get in touch when it does go live at the MobileFoo website. Step 5: Profit! Actually, that wasn't the idea here: Stacks & Heaps is free; there's no adverts, and we're not going to sell all your data either. So why did we do it? We wanted to get an idea of what it's like to move from coding for a desktop environment, to something completely different. We don't know whether in a year's time, the iPad will still be the dominant force, or whether Android will have smoothed out some bugs, tweaked the performance, and polished the UI, but I think it's a fairly sure bet that the tablet form factor is here to stay. We want to meet people who are using it, start chatting to them, and find out about some of the pain they're feeling. What better way to do that than do it ourselves, and get to write a cool game in the process?

    Read the article

  • Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

    - by user647124
    Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

    Read the article

  • The Birth of a Method - Where did OUM come from?

    - by user702549
    It seemed fitting to start this blog entry with the OUM vision statement. The vision for the Oracle® Unified Method (OUM) is to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product.  Well, it’s that time of year again; we just finished testing and packaging OUM 5.6.  It will be released for general availability to qualifying customers and partners this month.  Because of this, I’ve been reflecting back on how the birth of Oracle’s Unified method - OUM came about. As the Release Director of OUM, I’ve been honored to package every method release.  No, maybe you’d say it’s not so special.  Of course, anyone can use packaging software to create an .exe file.  But to me, it is pretty special, because so many people work together to make each release come about.  The rich content that results is what makes OUM’s history worth talking about.   To me, professionally speaking, working on OUM, well it’s been “a labor of love”.  My youngest child was just 8 years old when OUM was born, and she’s now in High School!  Watching her grow and change has been fascinating, if you ask her, she’s grown up hearing about OUM.  My son would often walk into my home office and ask “How is OUM today, Mom?”  I am one of many people that take care of OUM, and have watched the method “mature” over these last 6 years.  Maybe that makes me a "Method Mom" (someone in one of my classes last year actually said this outloud) but there are so many others who collaborate and care about OUM Development. I’ve thought about writing this blog entry for a long time just to reflect on how far the Method has come. Each release, as I prepare the OUM Contributors list, I see how many people’s experience and ideas it has taken to create this wealth of knowledge, process and task guidance as well as templates and examples.  If you’re wondering how many people, just go into OUM select the resources button on the top of most pages of the method, and on that resources page click the ABOUT link. So now back to my nostalgic moment as I finished release 5.6 packaging.  I reflected back, on all the things that happened that cause OUM to become not just a dream but to actually come to fruition.  Here are some key conditions that make it possible for each release of the method: A vision to have one method instead of many methods, thereby focusing on deeper, richer content People within Oracle’s consulting Organization  willing to contribute to OUM providing Subject Matter Experts who are willing to write down and share what they know. Oracle’s continued acquisition of software companies, the need to assimilate high quality existing materials from these companies The need to bring together people from very different backgrounds and provide a common language to support Oracle Product implementations that often involve multiple product families What came first, and then what was the strategy? Initially OUM 4.0 was based on Oracle’s J2EE Custom Development Method (JCDM), it was a good “backbone”  (work breakdown structure) it was Unified Process based, and had good content around UML as well as custom software development.  But it needed to be extended in order to achieve the OUM Vision. What happened after that was to take in the “best of the best”, the legacy and acquired methods were scheduled for assimilation into OUM, one release after another.  We incrementally built OUM.  We didn’t want to lose any of the expertise that was reflected in AIM (Oracle’s legacy Application Implementation Method), Compass (People Soft’s Application implementation method) and so many more. When was OUM born? OUM 4.1 published April 30, 2006.  This release allowed Oracles Advanced Technology groups to begin the very first implementations of Fusion Middleware.  In the early days of the Method we would prepare several releases a year.  Our iterative release development cycle began and continues to be refined with each Method release.  Now we typically see one major release each year. The OUM release development cycle is not unlike many Oracle Implementation projects in that we need to gather requirements, prioritize, prepare the content, test package and then go production.  Typically we develop an OUM release MoSCoW (must have, should have, could have, and won’t have) right after the prior release goes out.   These are the high level requirements.  We break the timeframe into increments, frequent checkpoints that help us assess the content and progress is measured through frequent checkpoints.  We work as a team to prioritize what should be done in each increment. Yes, the team provides the estimates for what can be done within a particular increment.  We sometimes have Method Development workshops (physically or virtually) to accelerate content development on a particular subject area, that is where the best content results. As the written content nears the final stages, it goes through edit and evaluation through peer reviews, and then moves into the release staging environment.  Then content freeze and testing of the method pack take place.  This iterative cycle is run using the OUM artifacts that make sense “fit for purpose”, project plans, MoSCoW lists, Test plans are just a few of the OUM work products we use on a Method Release project. In 2007 OUM 4.3, 4.4 and 4.5 were published.  With the release of 4.5 our Custom BI Method (Data Warehouse Method FastTrack) was assimilated into OUM.  These early releases helped us align Oracle’s Unified method with other industry standards Then in 2008 we made significant changes to the OUM “Backbone” to support Applications Implementation projects with that went to the OUM 5.0 release.  Now things started to get really interesting.  Next we had some major developments in the Envision focus area in the area of Enterprise Architecture.  We acquired some really great content from the former BEA, Liquid Enterprise Method (LEM) along with some SMEs who were willing to work at bringing this content into OUM.  The Service Oriented Architecture content in OUM is extensive and can help support the successful implementation of Fusion Middleware, as well as Fusion Applications. Of course we’ve developed a wealth of OUM training materials that work also helps to improve the method content.  It is one thing to write “how to”, and quite another to be able to teach people how to use the materials to improve the success of their projects.  I’ve learned so much by teaching people how to use OUM. What's next? So here toward the end of 2012, what’s in store in OUM 5.6, well, I’m sure you won’t be surprised the answer is Cloud Computing.   More details to come in the next couple of weeks!  The best part of being involved in the development of OUM is to see how many people have “adopted” OUM over these six years, Clients, Partners, and Oracle Consultants.  The content just gets better with each release.   I’d love to hear your comments on how OUM has evolved, and ideas for new content you’d like to see in the upcoming releases.

    Read the article

  • CodePlex Daily Summary for Tuesday, July 02, 2013

    CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

    Read the article

  • Design for complex ATG applications

    - by Glen Borkowski
    Overview Needless to say, some ATG applications are more complex than others.  Some ATG applications support a single site, single language, single catalog, single currency, have a single development staff, single business team, and a relatively simple business model.  The real complex applications have to support multiple sites, multiple languages, multiple catalogs, multiple currencies, a couple different development teams, multiple business teams, and a highly complex business model (and processes to go along with it).  While it's still important to implement a proper design for simple applications, it's absolutely critical to do this for the complex applications.  Why?  It's all about time and money.  If you are unable to manage your complex applications in an efficient manner, the cost of managing it will increase dramatically as will the time to get things done (time to market).  On the positive side, your competition is most likely in the same situation, so you just need to be more efficient than they are. This article is intended to discuss a number of key areas to think about when designing complex applications on ATG.  Some of this can get fairly technical, so it may help to get some background first.  You can get enough of the required background information from this post.  After reading that, come back here and follow along. Application Design Of all the various types of ATG applications out there, the most complex tend to be the ones in the telecommunications industry - especially the ones which operate in multiple countries.  To get started, let's assume that we are talking about an application like that.  One that has these properties: Operates in multiple countries - must support multiple sites, catalogs, languages, and currencies The organization is fairly loosely-coupled - single brand, but different businesses across different countries There is some common functionality across all sites in all countries There is some common functionality across different sites within the same country Sites within a single country may have some unique functionality - relative to other sites in the same country Complex product catalog (mostly in terms of bundles, eligibility, and compatibility) At this point, I'll assume you have read through the required reading and have a decent understanding of how ATG modules work... Code / configuration - assemble into modules When it comes to defining your modules for a complex application, there are a number of goals: Divide functionality between the modules in a way that maps to your business Group common functionality 'further down in the stack of modules' Provide a good balance between shared resources and autonomy for countries / sites Now I'll describe a high level approach to how you could accomplish those goals...  Let's start from the bottom and work our way up.  At the very bottom, you have the modules that ship with ATG - the 'out of the box' stuff.  You want to make sure that you are leveraging all the modules that make sense in order to get the most value from ATG as possible - and less stuff you'll have to write yourself.  On top of the ATG modules, you should create what we'll refer to as the Corporate Foundation Module described as follows: Sits directly on top of ATG modules Used by all applications across all countries and sites - this is the foundation for everyone Contains everything that is common across all countries / all sites Once established and settled, will change less frequently than other 'higher' modules Encapsulates as many enterprise-wide integrations as possible Will provide means of code sharing therefore less development / testing - faster time to market Contains a 'reference' web application (described below) The next layer up could be multiple modules for each country (you could replace this with region if that makes more sense).  We'll define those modules as follows: Sits on top of the corporate foundation module Contains what is unique to all sites in a given country Responsible for managing any resource bundles for this country (to handle multiple languages) Overrides / replaces corporate integration points with any country-specific ones Finally, we will define what should be a fairly 'thin' (in terms of functionality) set of modules for each site as follows: Sits on top of the country it resides in module Contains what is unique for a given site within a given country Will mostly contain configuration, but could also define some unique functionality as well Contains one or more web applications The graphic below should help to indicate how these modules fit together: Web applications As described in the previous section, there are many opportunities for sharing (minimizing costs) as it relates to the code and configuration aspects of ATG modules.  Web applications are also contained within ATG modules, however, sharing web applications can be a bit more difficult because this is what the end customer actually sees, and since each site may have some degree of unique look & feel, sharing becomes more challenging.  One approach that can help is to define a 'reference' web application at the corporate foundation layer to act as a solid starting point for each site.  Here's a description of the 'reference' web application: Contains minimal / sample reference styling as this will mostly be addressed at the site level web app Focus on functionality - ensure that core functionality is revealed via this web application Each individual site can use this as a starting point There may be multiple types of web apps (i.e. B2C, B2B, etc) There are some techniques to share web application assets - i.e. multiple web applications, defined in the web.xml, and it's worth investigating, but is out of scope here. Reference infrastructure In this complex environment, it is assumed that there is not a single infrastructure for all countries and all sites.  It's more likely that different countries (or regions) could have their own solution for infrastructure.  In this case, it will be advantageous to define a reference infrastructure which contains all the hardware and software that make up the core environment.  Specifications and diagrams should be created to outline what this reference infrastructure looks like, as well as it's baseline cost and the incremental cost to scale up with volume.  Having some consistency in terms of infrastructure will save time and money as new countries / sites come online.  Here are some properties of the reference infrastructure: Standardized approach to setup of hardware Type and number of servers Defines application server, operating system, database, etc... - including vendor and specific versions Consistent naming conventions Provides a consistent base of terminology and understanding across environments Defines which ATG services run on which servers Production Staging BCC / Preview Each site can change as required to meet scale requirements Governance / organization It should be no surprise that the complex application we're talking about is backed by an equally complex organization.  One of the more challenging aspects of efficiently managing a series of complex applications is to ensure the proper level of governance and organization.  Here are some ideas and goals to work towards: Establish a committee to make enterprise-wide decisions that affect all sites Representation should be evenly distributed Should have a clear communication procedure Focus on high level business goals Evaluation of feature / function gaps and how that relates to ATG release schedule / roadmap Determine when to upgrade & ensure value will be realized Determine how to manage various levels of modules Who is responsible for maintaining corporate / country / site layers Determine a procedure for controlling what goes in the corporate foundation module Standardize on source code control, database, hardware, OS versions, J2EE app servers, development procedures, etc only use tested / proven versions - this is something that should be centralized so that every country / site does not have to worry about compatibility between versions Create a innovation team Quickly develop new features, perform proof of concepts All teams can benefit from their findings Summary At this point, it should be clear why the topics above (design, governance, organization, etc) are critical to being able to efficiently manage a complex application.  To summarize, it's all about competitive advantage...  You will need to reduce costs and improve time to market with the goal of providing a better experience for your end customers.  You can reduce cost by reducing development time, time allocated to testing (don't have to test the corporate foundation module over and over again - do it once), and optimizing operations.  With an efficient design, you can improve your time to market and your business will be more flexible  and agile.  Over time, you'll find that you're becoming more focused on offering functionality that is new to the market (creativity) and this will be rewarded - you're now a leader. In addition to the above, you'll realize soft benefits as well.  Your staff will be operating in a culture based on sharing.  You'll want to reward efforts to improve and enhance the foundation as this will benefit everyone.  This culture will inspire innovation, which can only lend itself to your competitive advantage.

    Read the article

  • Instructions on how to configure a WebLogic Cluster and use it with Oracle Http Server

    - by Laurent Goldsztejn
    On October 17th I delivered a webcast on WebLogic Clustering that included a demo with Apache as the proxy server.  I realized that many steps are needed to set up the configuration I used during the demo.  The purpose of this article is to go through these steps to show how quickly and easily one can define a new cluster and then proxy requests via an Oracle Http Server (OHS). The domain configuration wizard offers the option to create a cluster.  The administration console or WLST, the Weblogic scripting tool can also be used to define a new cluster.  It can be created at any time but the servers that will participate in it cannot be in a running state. Cluster Creation using the configuration wizard Network and architecture requirements need to be considered while choosing between unicast and multicast. Multicast Vs. Unicast with WebLogic Clustering is of great help to make the best decision between the two messaging modes.  In addition, Configure Cluster offers details on each single field displayed above. After this initial configuration page, individual servers could be assigned to this newly created cluster although servers can be added later to the cluster.  What is not recommended is for the Admin server to participate in a cluster as the main purpose of the Admin server is to perform the bulk of the processing for the domain.  Servers need to stop before being assigned to a cluster.  There is also no minimum number of servers that have to participate in the cluster. At this point the configuration should be done and the cluster created successfully.  This can easily be verified from the console. Each clustered managed server can be launched to join the cluster.   At startup the following messages should be logged for each clustered managed server: <Notice> <WeblogicServer> <BEA-000365> <Server state changed to STARTING> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using messaging_mode cluster messaging> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_name>  It's time to try sending requests to the cluster and we will do this with the help of Oracle Http Server to play the role of a proxy server to demonstrate load balancing.  Proxy Server configuration  The first step is to download Weblogic Server Web Server Plugin that will enhance the web server by handling requests aimed at being sent to the Weblogic cluster.  For our test Oracle Http Server (OHS) will be used.  However plug-ins are also available for Apache Http server, Microsoft Internet Information Server (IIS), Oracle iPlanet Webserver or even WebLogic Server with the HttpClusterServlet. Once OHS is installed on the system, the configuration file, mod_wl_ohs.conf, will need to be altered to include Weblogic proxy specifics. First of all, add the following directive to instruct Apache to load the Weblogic shared object module extracted from the plugins file just downloaded. LoadModule weblogic_module modules/mod_wl_ohs.so and then create an IfModule directive to encapsulate the following location block so that proxy will be enabled by path (each request including /wls will be directed directly to the WebLogic Cluster).  You could also proxy requests by MIME type using MatchExpression in the Location block. <IfModule weblogic_module> <Location /wls>    SetHandler weblogic-handler    PathTrim /wls    WebLogicCluster MS1_URL:port,MS2_URL:port    Debug ON    WLLogFile        c:/tmp/global_proxy.log     WLTempDir        "c:/myTemp"    DebugConfigInfo  On </Location> </IfModule> SetHandler specifies the handler for the plug-in module  PathTrim will instruct the plug-in to trim /w ls from the URL before forwarding the request to the cluster. The list of WebLogic Servers defined in WeblogicCluster could contain a mixed set of clustered and single servers.  However, the dynamic list returned for this parameter will only contain valid clustered servers and may contain more servers if not all clustered servers are listed in WeblogicCluster. Testing proxy and load balancing It's time to start OHS web server which should at this point be configured correctly to proxy requests to the clustered servers.  By default round-robin is the load balancing strategy set by WebLogic. Testing the load balancing can be easily done by disabling cookies on your browser given that a request containing a cookie attempts to connect to the primary server. If that attempt fails, the plug-in attempts to make a connection to the next available server in the list in a round-robin fashion.  With cookies enabled, you could use two different browsers to test the load balancing with a JSP page that contains the following: <%@ page contentType="text/html; charset=iso-8859-1" language="java"  %>  <%  String path = request.getContextPath();   String getProtocol=request.getScheme();   String getDomain=request.getServerName();   String getPort=Integer.toString(request.getLocalPort());   String getPath = getProtocol+"://"+getDomain+":"+getPort+path+"/"; %> <html> <body> Receiving Server <%=getPath%> </body> </html>  Assuming that you name the JSP page Test.jsp and the webapp that contains it TestApp, your browsers should open the following URL: http://localhost/wls/TestApp/Test.jsp  Each browser should connect to a different clustered server and this simple JSP should confirm that.  The webapp that contains the JSP needs to be deployed to the cluster. You can also verify that the load is correctly balanced by looking at the proxy log file.  Each request generates a set of log entries that starts with : timestamp ================New Request: Each request is associated with a primary server and a secondary server if one is available.  For our test request, the following entries should appear in the log as well:Using Uri /wls/TestApp/Test.jsp After trimming path: '/TestApp/Test.jsp' The final request string is '/TestApp/Test.jsp' If an exception occurs, it should also be logged in the proxy log file with the prefix:timestamp *******Exception type   WeblogicBridgeConfig DebugConfigInfo enables runtime statistics and the production of configuration information.  For security purposes, this parameter should be turned off in production. http://webserver_host:port/path/xyz.jsp?__WebLogicBridgeConfig will display a proxy bridge page detailing the plugin configuration followed by runtime statistics which could help in diagnosing issues along with the analyzing of the proxy log file.  In our example the url would be: http://localhost/wls/TestApp/Test.jsp?__WebLogicBridgeConfig  Here is how the top section of the screen can look like: The bottom part of the page contains runtime statistics, here is a snippet of it (unrelated with the previous JSP example).   This entire plugin configuration should be very similar with other web servers, what varies is the name of the proxy server configuration file. So, as you can see, it only takes a few minutes to configure a Weblogic cluster and get servers to join it. 

    Read the article

  • 3D Ball Physics Theory: collision response on ground and against walls?

    - by David
    I'm really struggling to get a strong grasp on how I should be handling collision response in a game engine I'm building around a 3D ball physics concept. Think Monkey Ball as an example of the type of gameplay. I am currently using sphere-to-sphere broad phase, then AABB to OBB testing (the final test I am using right now is one that checks if one of the 8 OBB points crosses the planes of the object it is testing against). This seems to work pretty well, and I am getting back: Plane that object is colliding against (with a point on the plane, the plane's normal, and the exact point of intersection. I've tried what feels like dozens of different high-level strategies for handling these collisions, without any real success. I think my biggest problem is understanding how to handle collisions against walls in the x-y axes (left/right, front/back), which I want to have elasticity, and the ground (z-axis) where I want an elastic reaction if the ball drops down, but then for it to eventually normalize and be kept "on the ground" (not go into the ground, but also not continue bouncing). Without kluging something together, I'm positive there is a good way to handle this, my theories just aren't getting me all the way there. For physics modeling and movement, I am trying to use a Euler based setup with each object maintaining a position (and destination position prior to collision detection), a velocity (which is added onto the position to determine the destination position), and an acceleration (which I use to store any player input being put on the ball, as well as gravity in the z coord). Starting from when I detect a collision, what is a good way to approach the response to get the expected behavior in all cases? Thanks in advance to anyone taking the time to assist... I am grateful for any pointers, and happy to post any additional info or code if it is useful. UPDATE Based on Steve H's and eBusiness' responses below, I have adapted my collision response to what makes a lot more sense now. It was close to right before, but I didn't have all the right pieces together at the right time! I have one problem left to solve, and that is what is causing the floor collision to hit every frame. Here's the collision response code I have now for the ball, then I'll describe the last bit I'm still struggling to understand. // if we are moving in the direction of the plane (against the normal)... if (m_velocity.dot(intersection.plane.normal) <= 0.0f) { float dampeningForce = 1.8f; // eventually create this value based on mass and acceleration // Calculate the projection velocity PVRTVec3 actingVelocity = m_velocity.project(intersection.plane.normal); m_velocity -= actingVelocity * dampeningForce; } // Clamp z-velocity to zero if we are within a certain threshold // -- NOTE: this was an experimental idea I had to solve the "jitter" bug I'll describe below float diff = 0.2f - abs(m_velocity.z); if (diff > 0.0f && diff <= 0.2f) { m_velocity.z = 0.0f; } // Take this object to its new destination position based on... // -- our pre-collision position + vector to the collision point + our new velocity after collision * time // -- remaining after the collision to finish the movement m_destPosition = m_position + intersection.diff + (m_velocity * intersection.tRemaining * GAMESTATE->dt); The above snippet is run after a collision is detected on the ball (collider) with a collidee (floor in this case). With a dampening force of 1.8f, the ball's reflected "upward" velocity will eventually be overcome by gravity, so the ball will essentially be stuck on the floor. THIS is the problem I have now... the collision code is running every frame (since the ball's z-velocity is constantly pushing it a collision with the floor below it). The ball is not technically stuck, I can move it around still, but the movement is really goofy because the velocity and position keep getting affected adversely by the above snippet. I was experimenting with an idea to clamp the z-velocity to zero if it was "close to zero", but this didn't do what I think... probably because the very next frame the ball gets a new gravity acceleration applied to its velocity regardless (which I think is good, right?). Collisions with walls are as they used to be and work very well. It's just this last bit of "stickiness" to deal with. The camera is constantly jittering up and down by extremely small fractions too when the ball is "at rest". I'll keep playing with it... I like puzzles like this, especially when I think I'm close. Any final ideas on what I could be doing wrong here? UPDATE 2 Good news - I discovered I should be subtracting the intersection.diff from the m_position (position prior to collision). The intersection.diff is my calculation of the difference in the vector of position to destPosition from the intersection point to the position. In this case, adding it was causing my ball to always go "up" just a little bit, causing the jitter. By subtracting it, and moving that clamper for the velocity.z when close to zero to being above the dot product (and changing the test from <= 0 to < 0), I now have the following: // Clamp z-velocity to zero if we are within a certain threshold float diff = 0.2f - abs(m_velocity.z); if (diff > 0.0f && diff <= 0.2f) { m_velocity.z = 0.0f; } // if we are moving in the direction of the plane (against the normal)... float dotprod = m_velocity.dot(intersection.plane.normal); if (dotprod < 0.0f) { float dampeningForce = 1.8f; // eventually create this value based on mass and acceleration? // Calculate the projection velocity PVRTVec3 actingVelocity = m_velocity.project(intersection.plane.normal); m_velocity -= actingVelocity * dampeningForce; } // Take this object to its new destination position based on... // -- our pre-collision position + vector to the collision point + our new velocity after collision * time // -- remaining after the collision to finish the movement m_destPosition = m_position - intersection.diff + (m_velocity * intersection.tRemaining * GAMESTATE->dt); UpdateWorldMatrix(m_destWorldMatrix, m_destOBB, m_destPosition, false); This is MUCH better. No jitter, and the ball now "rests" at the floor, while still bouncing off the floor and walls. The ONLY thing left is that the ball is now virtually "stuck". He can move but at a much slower rate, likely because the else of my dot product test is only letting the ball move at a rate multiplied against the tRemaining... I think this is a better solution than I had previously, but still somehow not the right idea. BTW, I'm trying to journal my progress through this problem for anyone else with a similar situation - hopefully it will serve as some help, as many similar posts have for me over the years.

    Read the article

  • Learnings from trying to write better software: Loud errors from the very start

    - by theo.spears
    Microsoft made a very small number of backwards incompatible changes between .NET 1.1 and 2.0, because they wanted to make it as easy and safe as possible to port applications to the new runtime. (Here’s a list.) However, one thing they did change was what happens when a background thread fails with an unhanded exception - in .NET 1.1 nothing happened, the thread terminated, and the application continued oblivious. Try the same trick in .NET 2.0 and the entire application, including all threads, will rudely terminate. There are three reasons for this. Firstly if a background thread has crashed, it may have left the entire application in an inconsistent state, in a way that will affect other threads. It’s better to terminate the entire application than continue and have the application perform actions based on a broken state, for example take customer orders, or write corrupt files to disk.  Secondly, during software development, it is far better for errors to be loud and obtrusive. Even if you have unit tests and integration tests (and you should), a key part of ensuring software works properly is to actually try using it, both through systematic testing and through the casual use all software gets by its developers during use. Subtle errors are easy to miss if you are not actually doing real work using the application, loud errors are obvious. Thirdly, and most importantly, even if catching and swallowing exceptions indiscriminately doesn't cause any problems in your application, the presence of unexpected exceptions shows you do not fully understand the behavior of your code. The currently released version of your application may be absolutely correct. However, because your mental model of the behavior is wrong, any future change you make to the program could and probably will introduce critical errors.  This applies to more than just exceptions causing threads to exit, any unexpected state should make the application blow up in an un-ignorable way. The worst thing you can do is silently swallow errors and continue. And let's be clear, writing to a log file does not count as blowing up in an un-ignorable way.  This is all simple as long as the call stack only contains your code, but when your functions start to be called by third party or .NET framework code, it's surprisingly easy for exceptions to start vanishing. Let's look at two examples.   1. Windows forms drag drop events  Usually if you throw an exception from a winforms event handler it will bring up the "application has crashed" dialog with abort and continue options. This is a good default behavior - the error is big and loud, but it is possible for the user to ignore the error and hopefully save their data, if somehow this bug makes it past testing. However drag and drop are different - throw an exception from one of these and it will just be silently swallowed with no explanation.  By the way, it's not just drag and drop events. Timer events do it too.  You can research how exceptions are treated in different handlers and code appropriately, but the safest and most user friendly approach is to always catch exceptions in your event handlers and show your own error message. I'll talk about one good approach to handling these exceptions at the end of this post.   2. SSMS integration for SQL Tab Magic  A while back wrote an SSMS add-in called SQL Tab Magic (learn more about the process here). It works by listening to certain SSMS events and remembering what documents are opened and closed. I deployed it internally and it was used for a few months by a number of people without problems, so I was reasonably confident in its quality. Before releasing I made a few cleanups, including introducing error reporting. Bam. A few days later I was looking at over 1,000 error reports in my inbox. In turns out I wasn't handling table designers properly. The exceptions were there, but again SSMS was helpfully swallowing them all for me, so I was blissfully unaware. Had I made my errors loud from the start, I would have noticed these issues long before and fixed them.   Handling exceptions  Now you are systematically catching exceptions throughout your application, you need to do something with them. I've tried 3 options: log them, alert the user, and automatically send them home.  There are a few good options for logging in .NET. The most widespread is Apache log4net, which provides a very capable and configurable logging framework. There is also NLog which has a compatible interface, with a greater emphasis on fluent rather than XML configuration.  Alerting the user serves two purposes. Firstly it means they understand their action has failed to they don't just assume it worked (Silent file copy failure is a problem if you then delete the originals) or that they should keep waiting for a background task to complete. Secondly, it means the users can report the bug to your support team, and then you can fix it. This means the message you show the user should contain the information you need as a developer to identify and fix it. And the user will probably just send you a screenshot of the dialog, so it shouldn't be hidden by scroll bars.  This leads us to the third option, automatically sending error reports home. By automatic I mean with minimal effort on the part of the user, rather than doing it silently behind their backs. The advantage of this is you can send back far more detailed and precise information than you can expect a user to include in an email, and by making it easier to report errors, you make it more likely users will do so.  We do this using a great tool called SmartAssembly (full disclosure: this is a product made by Red Gate). It captures complete stack traces including the values of all local variables and then allows the user to send all this information back with a single click. We also capture log files to help understand what lead up to the error. We then use the free SmartAssembly Sync for Jira to dedupe these reports and raise them as bugs in our bug tracking system.  The combined effect of loud errors during development and then automatic error reporting once software is deployed allows us to find and fix more bugs, correct misunderstandings on how our software works, and overall is a key piece in delivering higher quality software. However it is no substitute for having motivated cunning testers in the building - and we're looking to hire more of those too.   If you found this post interesting you should follow me on twitter.  

    Read the article

  • JSP Precompilation for ADF Applications

    - by Duncan Mills
    A question that comes up from time to time, particularly in relation to build automation, is how to best pre-compile the .jspx and .jsff files in an ADF application. Thus ensuring that the app is ready to run as soon as it's installed into WebLogic. In the normal run of things, the first poor soul to hit a page pays the price and has to wait a little whilst the JSP is compiled into a servlet. Everyone else subsequently gets a free lunch. So it's a reasonable thing to want to do... Let Me List the Ways So forth to Google (other search engines are available)... which lead me to a fairly old article on WLDJ - Removing Performance Bottlenecks Through JSP Precompilation. Technololgy wise, it's somewhat out of date, but the one good point that it made is that it's really not very useful to try and use the precompile option in the weblogic.xml file. That's a really good observation - particularly if you're trying to integrate a pre-compile step into a Hudson Continuous Integration process. That same article mentioned an alternative approach for programmatic pre-compilation using weblogic.jspc. This seemed like a much more useful approach for a CI environment. However, weblogic.jspc is now obsoleted by weblogic.appc so we'll use that instead.  Thanks to Steve for the pointer there. And So To APPC APPC has documentation - always a great place to start, and supports usage both from Ant via the wlappc task and from the command line using the weblogic.appc command. In my testing I took the latter approach. Usage, as the documentation will show you, is superficially pretty simple.  The nice thing here, is that you can pass an existing EAR file (generated of course using OJDeploy) and that EAR will be updated in place with the freshly compiled servlet classes created from the JSPs. Appc takes care of all the unpacking, compiling and re-packing of the EAR for you. Neat.  So we're done right...? Not quite. The Devil is in the Detail  OK so I'm being overly dramatic but it's not all plain sailing, so here's a short guide to using weblogic.appc to compile a simple ADF application without pain.  Information You'll Need The following is based on the assumption that you have a stand-alone WLS install with the Application Development  Runtime installed and a suitable ADF enabled domain created. This could of course all be run off of a JDeveloper install as well 1. Your Weblogic home directory. Everything you need is relative to this so make a note.  In my case it's c:\builds\wls_ps4. 2. Next deploy your EAR as normal and have a peek inside it using your favourite zip management tool. First of all look at the weblogic-application.xml inside the EAR /META-INF directory. Have a look for any library references. Something like this: <library-ref>    <library-name>adf.oracle.domain</library-name> </library-ref>   Make a note of the library ref (adf.oracle.domain in this case) , you'll need that in a second. 3. Next open the nested WAR file within the EAR and then have a peek inside the weblogic.xml file in the /WEB-INF directory. Again  make a note of the library references. 4. Now start the WebLogic as per normal and run the WebLogic console app (e.g. http://localhost:7001/console). In the Domain Structure navigator, select Deployments. 5. For each of the libraries you noted down drill into the library definition and make a note of the .war, .ear or .jar that defines the library. For example, in my case adf.oracle.domain maps to "C:\ builds\ WLS_PS4\ oracle_common\ modules\ oracle. adf. model_11. 1. 1\ adf. oracle. domain. ear". Note the extra spaces that are salted throughout this string as it is displayed in the console - just to make it annoying, you'll have to strip these out. 6. Finally you'll need the location of the adfsharebean.jar. We need to pass this on the classpath for APPC so that the ADFConfigLifeCycleCallBack listener can be found. In a more complex app of your own you may need additional classpath entries as well.  Now we're ready to go, and it's a simple matter of applying the information we have gathered into the relevant command line arguments for the utility A Simple CMD File to Run APPC  Here's the stub .cmd file I'm using on Windows to run this. @echo offREM Stub weblogic.appc Runner setlocal set WLS_HOME=C:\builds\WLS_PS4 set ADF_LIB_ROOT=%WLS_HOME%\oracle_common\modulesset COMMON_LIB_ROOT=%WLS_HOME%\wlserver_10.3\common\deployable-libraries set ADF_WEBAPP=%ADF_LIB_ROOT%\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war set ADF_DOMAIN=%ADF_LIB_ROOT%\oracle.adf.model_11.1.1\adf.oracle.domain.ear set JSTL=%COMMON_LIB_ROOT%\jstl-1.2.war set JSF=%COMMON_LIB_ROOT%\jsf-1.2.war set ADF_SHARE=%ADF_LIB_ROOT%\oracle.adf.share_11.1.1\adfsharembean.jar REM Set up the WebLogic Environment so appc can be found call %WLS_HOME%\wlserver_10.3\server\bin\setWLSEnv.cmd CLS REM Now compile away!java weblogic.appc -verbose -library %ADF_WEBAPP%,%ADF_DOMAIN%,%JSTL%,%JSF% -classpath %ADF_SHARE% %1 endlocal Running the above on a target ADF .ear  file will zip through and create all of the relevant compiled classes inside your nested .war file in the \WEB-INF\classes\jsp_servlet\ directory (but don't take my word for it, run it and take a look!) And So... In the immortal words of  the Pet Shop Boys, Was It Worth It? Well, here's where you'll have to do your own testing. In  my case here, with a simple ADF application, pre-compilation shaved an non-scientific "3 Elephants" off of the initial page load time for the first access of each page. That's a pretty significant payback for such a simple step to add into your CI process, so why not give it a go.

    Read the article

  • 7 Good Reasons to Upgrade E-Business Suite to the cloud

    - by Lisa Schwartz
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} As promised here is blog Part 2: Why Upgrade to Oracle E-Business Suite 12 in the cloud? 7 Good Reasons to Upgrade to E-Business Suite 12 in the Cloud: 1)   Take advantage of new and improved features: from global sub-ledger accounting to mobile access for supply chain management to built-in extensions for information search and discovery. If you haven’t checked out the latest features yet, there are over 1000 EBS 12 enhancements. 2) Plan now to address any ongoing Oracle Support considerations and regulatory compliance requirements. EBS Release 11 support is ending soon. Based upon that information alone, you should have an EBS upgrade strategy and planning well underway. 3) Customizations got you worried? Expedite your next Oracle E-Business Suite upgrade – have Oracle identify all customizations, reduce un-needed customizations (EBS 12 has built-in many of your customizations) and during the upgrade keep all necessary customizations to run your business. 4) Migrating EBS to the cloud allows parallel migration and testing. Therefore no extra hardware purchases for the testing and upgrade. Business disruption is minimized. And, by moving to the cloud, this provides for smoother future upgrades that are based on your own timeline. 5) Oracle Experts will upgrade and run your EBS applications for you in the cloud. Free your IT resources to develop new services and work on projects that are critical to business innovation and competitiveness. Your IT resources will not be inundated with upgrade tasks!      6) Reallocate precious IT dollars to other projects, eliminate CapEx costs. 7) Oracle minimizes business risk by having enterprise class cloud services under stringent SLAs designed to run your business applications for you such as: a. Enterprise grade infrastructure b. World-class security and identity management c. Best practices in regulatory compliance: from classified federal gov’t standards, to healthcare HIPPA standards to meeting Financial Services requirements (PCI DSS) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 7 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Next Step: To help you upgrade and get to the cloud in the shortest period of  time, Oracle has a program called Oracle Upgrade Factory for Oracle E-Business Suite 12. It offers a unique approach, seamlessly bundling Managed Cloud Services and Oracle Consulting Services together for an entire Oracle E-Business Suite upgrade and migration to a managed private  cloud. Read the Oracle Upgrade Factory Solution Brief here. Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • BizTalk: Internals: the Partner Direct Ports and the Orchestration Chains

    - by Leonid Ganeline
    Partner Direct Port is one of the BizTalk hidden gems. It opens simple ways to the several messaging patterns. This article based on the Kevin Lam’s blog article. The article is pretty detailed but it still leaves several unclear pieces. So I have created a sample and will show how it works from different perspectives. Requirements We should create an orchestration chain where the messages should be routed from the first stage to the second stage. The messages should not be modified. All messages has the same message type. Common artifacts Source code can be downloaded here. It is interesting but all orchestrations use only one port type. It is possible because all ports are one-way ports and use only one operation. I have added a B orchestration. It helps to test the sample, showing all test messages in channel. The Receive shape Filter is empty. A Receive Port (R_Shema1Direct) is a plain Direct Port. As you can see, a subscription expression of this direct port has only one part, the MessageType for our test schema: A Filer is empty but, as you know, a link from the Receive shape to the Port creates this MessageType expression. I use only one Physical Receive File port to send a message to all processes. Each orchestration outputs a Trace.WriteLine(“<Orchestration Name>”). Forward Binding This sample has three orchestrations: A_1, A_21 and A_22. A_1 is a sender, A_21 and A_22 are receivers. Here is a subscription of the A_1 orchestration: It has two parts A MessageType. The same was for the B orchestration. A ReceivePortID. There was no such parameter for the B orchestration. It was created because I have bound the orchestration port with Physical Receive File port. This binding means the PortID parameter is added to the subscription. How to set up the ports? All ports involved in the message exchange should be the same port type. It forces us to use the same operation and the same message type for the bound ports. This step as absolutely contra-intuitive. We have to choose a Partner Orchestration parameter for the sending orchestration, A_1. The first strange thing is it is not a partner orchestration we have to choose but an orchestration port. But the most strange thing is we have to choose exactly this orchestration and exactly this port.It is not a port from the partner, receive orchestrations, A_21 or A_22, but it is A_1 orchestration and S_SentFromA_1 port. Now we have to choose a Partner Orchestration parameter for the received orchestrations, A_21 and A_22. Nothing strange is here except a parameter name. We choose the port of the sender, A_1 orchestration and S_SentFromA_1 port. As you can see the Partner Orchestration parameter for the sender and receiver orchestrations is the same. Testing I dropped a test file in a file folder. There we go: A dropped file was received by B and by A_1 A_1 sent a message forward. A message was received by B, A_21, A_22 Let’s look at a context of a message sent by A_1 on the second step: A MessageType part. It is quite expected. A PartnerService, a ParnerPort, an Operation. All those parameters were set up in the Partner Orchestration parameter on both bound ports.     Now let’s see a subscription of the A_21 and A_22 orchestrations. Now it makes sense. That’s why we have chosen such a strange value for the Partner Orchestration parameter of the sending orchestration. Inverse Binding This sample has three orchestrations: A_11, A_12 and A_2. A_11 and A_12 are senders, A_2 is receiver. How to set up the ports? All ports involved in the message exchange should be the same port type. It forces us to use the same operation and the same message type for the bound ports. This step as absolutely contra-intuitive. We have to choose a Partner Orchestration parameter for a receiving orchestration, A_2. The first strange thing is it is not a partner orchestration we have to choose but an orchestration port. But the most strange thing is we have to choose exactly this orchestration and exactly this port.It is not a port from the partner, sent orchestrations, A_11 or A_12, but it is A_2 orchestration and R_SentToA_2 port. Now we have to choose a Partner Orchestration parameter for the sending orchestrations, A_11 and A_12. Nothing strange is here except a parameter name. We choose the port of the sender, A_2 orchestration and R_SentToA_2 port. Testing I dropped a test file in a file folder. There we go: A dropped file was received by B, A_11 and by A_12 A_11 and A_12 sent two messages forward. The messages were received by B, A_2 Let’s see what was a context of a message sent by A_1 on the second step: A MessageType part. It is quite expected. A PartnerService, a ParnerPort, an Operation. All those parameters were set up in the Partner Orchestration parameter on both bound ports. Here is a subscription of the A_2 orchestration. Models I had a hard time trying to explain the Partner Direct Ports in simple terms. I have finished with this model: Forward Binding Receivers know a Sender. Sender doesn’t know Receivers. Publishers know a Subscriber. Subscriber doesn’t know Publishers. 1 –> 1 1 –> M Inverse Binding Senders know a Receiver. Receiver doesn’t know Senders. Subscribers know a Publisher. Publisher doesn’t know Subscribers. 1 –> 1 M –> 1 Notes   Orchestration chain It’s worth to note, the Partner Direct Port Binding creates a chain opened from one side and closed from another. The Forward Binding: A new Receiver can be added at run-time. The Sender can not be changed without design-time changes in Receivers. The Inverse Binding: A new Sender can be added at run-time. The Receiver can not be changed without design-time changes in Senders.

    Read the article

  • Why do we (really) program to interfaces?

    - by Kyle Burns
    One of the earliest lessons I was taught in Enterprise development was "always program against an interface".  This was back in the VB6 days and I quickly learned that no code would be allowed to move to the QA server unless my business objects and data access objects each are defined as an interface and have a matching implementation class.  Why?  "It's more reusable" was one answer.  "It doesn't tie you to a specific implementation" a slightly more knowing answer.  And let's not forget the discussion ending "it's a standard".  The problem with these responses was that senior people didn't really understand the reason we were doing the things we were doing and because of that, we were entirely unable to realize the intent behind the practice - we simply used interfaces and had a bunch of extra code to maintain to show for it. It wasn't until a few years later that I finally heard the term "Inversion of Control".  Simply put, "Inversion of Control" takes the creation of objects that used to be within the control (and therefore a responsibility of) of your component and moves it to some outside force.  For example, consider the following code which follows the old "always program against an interface" rule in the manner of many corporate development shops: 1: ICatalog catalog = new Catalog(); 2: Category[] categories = catalog.GetCategories(); In this example, I met the requirement of the rule by declaring the variable as ICatalog, but I didn't hit "it doesn't tie you to a specific implementation" because I explicitly created an instance of the concrete Catalog object.  If I want to test the functionality of the code I just wrote I have to have an environment in which Catalog can be created along with any of the resources upon which it depends (e.g. configuration files, database connections, etc) in order to test my functionality.  That's a lot of setup work and one of the things that I think ultimately discourages real buy-in of unit testing in many development shops. So how do I test my code without needing Catalog to work?  A very primitive approach I've seen is to change the line the instantiates catalog to read: 1: ICatalog catalog = new FakeCatalog();   once the test is run and passes, the code is switched back to the real thing.  This obviously poses a huge risk for introducing test code into production and in my opinion is worse than just keeping the dependency and its associated setup work.  Another popular approach is to make use of Factory methods which use an object whose "job" is to know how to obtain a valid instance of the object.  Using this approach, the code may look something like this: 1: ICatalog catalog = CatalogFactory.GetCatalog();   The code inside the factory is responsible for deciding "what kind" of catalog is needed.  This is a far better approach than the previous one, but it does make projects grow considerably because now in addition to the interface, the real implementation, and the fake implementation(s) for testing you have added a minimum of one factory (or at least a factory method) for each of your interfaces.  Once again, developers say "that's too complicated and has me writing a bunch of useless code" and quietly slip back into just creating a new Catalog and chalking any test failures up to "it will probably work on the server". This is where software intended specifically to facilitate Inversion of Control comes into play.  There are many libraries that take on the Inversion of Control responsibilities in .Net and most of them have many pros and cons.  From this point forward I'll discuss concepts from the standpoint of the Unity framework produced by Microsoft's Patterns and Practices team.  I'm primarily focusing on this library because it questions about it inspired this posting. At Unity's core and that of most any IoC framework is a catalog or registry of components.  This registry can be configured either through code or using the application's configuration file and in the most simple terms says "interface X maps to concrete implementation Y".  It can get much more complicated, but I want to keep things at the "what does it do" level instead of "how does it do it".  The object that exposes most of the Unity functionality is the UnityContainer.  This object exposes methods to configure the catalog as well as the Resolve<T> method which is used to obtain an instance of the type represented by T.  When using the Resolve<T> method, Unity does not necessarily have to just "new up" the requested object, but also can track dependencies of that object and ensure that the entire dependency chain is satisfied. There are three basic ways that I have seen Unity used within projects.  Those are through classes directly using the Unity container, classes requiring injection of dependencies, and classes making use of the Service Locator pattern. The first usage of Unity is when classes are aware of the Unity container and directly call its Resolve method whenever they need the services advertised by an interface.  The up side of this approach is that IoC is utilized, but the down side is that every class has to be aware that Unity is being used and tied directly to that implementation. Many developers don't like the idea of as close a tie to specific IoC implementation as is represented by using Unity within all of your classes and for the most part I agree that this isn't a good idea.  As an alternative, classes can be designed for Dependency Injection.  Dependency Injection is where a force outside the class itself manipulates the object to provide implementations of the interfaces that the class needs to interact with the outside world.  This is typically done either through constructor injection where the object has a constructor that accepts an instance of each interface it requires or through property setters accepting the service providers.  When using dependency, I lean toward the use of constructor injection because I view the constructor as being a much better way to "discover" what is required for the instance to be ready for use.  During resolution, Unity looks for an injection constructor and will attempt to resolve instances of each interface required by the constructor, throwing an exception of unable to meet the advertised needs of the class.  The up side of this approach is that the needs of the class are very clearly advertised and the class is unaware of which IoC container (if any) is being used.  The down side of this approach is that you're required to maintain the objects passed to the constructor as instance variables throughout the life of your object and that objects which coordinate with many external services require a lot of additional constructor arguments (this gets ugly and may indicate a need for refactoring). The final way that I've seen and used Unity is to make use of the ServiceLocator pattern, of which the Patterns and Practices team has also provided a Unity-compatible implementation.  When using the ServiceLocator, your class calls ServiceLocator.Retrieve in places where it would have called Resolve on the Unity container.  Like using Unity directly, it does tie you directly to the ServiceLocator implementation and makes your code aware that dependency injection is taking place, but it does have the up side of giving you the freedom to swap out the underlying IoC container if necessary.  I'm not hugely concerned with hiding IoC entirely from the class (I view this as a "nice to have"), so the single biggest problem that I see with the ServiceLocator approach is that it provides no way to proactively advertise needs in the way that constructor injection does, allowing more opportunity for difficult to track runtime errors. This blog entry has not been intended in any way to be a definitive work on IoC, but rather as something to spur thought about why we program to interfaces and some ways to reach the intended value of the practice instead of having it just complicate your code.  I hope that it helps somebody begin or continue a journey away from being a "Cargo Cult Programmer".

    Read the article

  • Creating a Document Library with Content Type in code

    - by David Jacobus
    Originally posted on: http://geekswithblogs.net/djacobus/archive/2013/10/15/154360.aspxIn the past, I have shown how to create a list content type and add the content type to a list in code.  As a Developer, many of the artifacts which we create are widgets which have a List or Document Library as the back end.   We need to be able to create our applications (Web Part, etc.) without having the user involved except to enter the list item data.  Today, I will show you how to do the same with a document library.    A summary of what we will do is as follows:   1.   Create an Empty SharePoint Project in Visual Studio 2.   Add a Code Folder in the solution and Drag and Drop Utilities and Extensions Libraries to the solution 3.   Create a new Feature and add and event receiver  all the code will be in the event receiver 4.   Add the fields which will extend the built-in Document content type 5.   If the Content Type does not exist, Create it 6.   If the Document Library does not exist, Create it with the new Content Type inherited from the Document Content Type 7.   Delete the Document Content Type from the Library (as we have a new one which inherited from it) 8.   Add the fields which we want to be visible from the fields added to the new Content Type   Here we go:   Create an Empty SharePoint Project in Visual Studio      Add a Code Folder in the solution and Drag and Drop Utilities and Extensions Libraries to the solution       The Utilities and Extensions Library will be part of this project which I will provide a download link at the end of this post.  Drag and drop them into your project.  If Dragged and Dropped from windows explorer you will need to show all files and then include them in your project.  Change the Namespace to agree with your project.   Create a new Feature and add and event receiver  all the code will be in the event receiver.  Here We added a new Feature called “CreateDocLib”  and then right click to add an Event Receiver All of our code will be in this Event Receiver.  For this Demo I will only be using the Feature Activated Event.      From this point on we will be looking at code!    We are adding two constants for use columGroup (How we want SharePoint to Group them, usually Company Name) and ctName(ContentType Name)  using System; using System.Runtime.InteropServices; using System.Security.Permissions; using Microsoft.SharePoint; namespace CreateDocLib.Features.CreateDocLib { /// <summary> /// This class handles events raised during feature activation, deactivation, installation, uninstallation, and upgrade. /// </summary> /// <remarks> /// The GUID attached to this class may be used during packaging and should not be modified. /// </remarks> [Guid("56e6897c-97c4-41ac-bc5b-5cd2c04f2dd1")] public class CreateDocLibEventReceiver : SPFeatureReceiver { const string columnGroup = "DJ"; const string ctName = "DJDocLib"; } }     Here we are creating the Feature Activated event.   Adding the new fields (Site Columns) ,  Testing if the Content Type Exists, if not adding it.  Testing if the document Library exists, if not adding it.   #region DocLib public override void FeatureActivated(SPFeatureReceiverProperties properties) { using (SPWeb spWeb = properties.GetWeb() as SPWeb) { //add the fields addFields(spWeb); //add content type SPContentType testCT = spWeb.ContentTypes[ctName]; // we will not create the content type if it exists if (testCT == null) { //the content type does not exist add it addContentType(spWeb, ctName); } if ((spWeb.Lists.TryGetList("MyDocuments") == null)) { //create the list if it dosen't to exist CreateDocLib(spWeb); } } } #endregion The addFields method uses the utilities library to add site columns to the site. We can add as many fields within this method as we like. Here we are adding one for demonstration purposes. Icon as a Url type.  public void addFields(SPWeb spWeb) { Utilities.addField(spWeb, "Icon", SPFieldType.URL, false, columnGroup); }The addContentType method add the new Content Type to the site Content Types. We have already checked to see that it does not exist. In addition, here is where we add the linkages from our site columns previously created to our new Content Type   private static void addContentType(SPWeb spWeb, string name) { SPContentType myContentType = new SPContentType(spWeb.ContentTypes["Document"], spWeb.ContentTypes, name) { Group = columnGroup }; spWeb.ContentTypes.Add(myContentType); addContentTypeLinkages(spWeb, myContentType); myContentType.Update(); } Here we are adding just one linkage as we only have one additional field in our Content Type public static void addContentTypeLinkages(SPWeb spWeb, SPContentType ct) { Utilities.addContentTypeLink(spWeb, "Icon", ct); } Next we add the logic to create our new Document Library, which we have already checked to see if it exists.  We create the document library and turn on content types.  Add the new content type and then delete the old “Document” content types.   private void CreateDocLib(SPWeb web) { using (var site = new SPSite(web.Url)) { var web1 = site.RootWeb; var listId = web1.Lists.Add("MyDocuments", string.Empty, SPListTemplateType.DocumentLibrary); var lib = web1.Lists[listId] as SPDocumentLibrary; lib.ContentTypesEnabled = true; var docType = web.ContentTypes[ctName]; lib.ContentTypes.Add(docType); lib.ContentTypes.Delete(lib.ContentTypes["Document"].Id); lib.Update(); AddLibrarySettings(web1, lib); } }  Finally, we set some document library settings on our new document library with the AddLibrarySettings method. We then ensure that the new site column is visible when viewed in the browser.  private void AddLibrarySettings(SPWeb web, SPDocumentLibrary lib) { lib.OnQuickLaunch = true; lib.ForceCheckout = true; lib.EnableVersioning = true; lib.MajorVersionLimit = 5; lib.EnableMinorVersions = true; lib.MajorWithMinorVersionsLimit = 5; lib.Update(); var view = lib.DefaultView; view.ViewFields.Add("Icon"); view.Update(); } Okay, what's cool here: In a few lines of code, we have created site columns, A content Type, a document library. As a developer, I use this functionality all the time. For instance, I could now just add a web part to this same solutionwhich uses this document Library. I love SharePoint! Here is the complete solution: Create Document Library Code

    Read the article

  • Webcast Q&A: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter

    - by kellsey.ruppel
    Last Thursday we had the second webcast in our WebCenter in Action webcast series, "Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter, where customer Michael Chander from Qualcomm and Vince Casarez & Gourav Goyal from Oracle Partner Keste shared how Oracle WebCenter is powering Qualcomm’s externally facing website and providing a seamless experience for their customers. In case you missed it, here's a recap of the Q&A.   Mike Chandler, Qualcomm Q: Did you run into any issues when integrating all of the different applications together?A: Definitely, our main challenges were in the area of user provisioning and security propagation, all the standard stuff you might expect when hooking up SSO for authentication and authorization. In addition, we spent several iterations getting the UI’s in sync. While everyone was given the same digital material to build too, each team interpreted and implemented it their own way. Initially as a user navigated, if you were looking for it, you could slight variations in color or font or width , stuff like that. So we had to pull all the developers responsible for the UI together and get pixel level agreement on a lot of things so we could ensure seamless transitions across applications. Q: What has been the biggest benefit your end users have seen?A: Wow, there have been several. An SSO enabled environment was huge a win for our users. The portal application that this replaced had not really been invested in by the business. With this project, we had full business participation and backing, and it really showed in some key areas like the shopping experience. For example, while ordering in the previous site, the items did not have any pictures or really usable descriptions. A tremendous amount of work was done to try and make the site more intuitive and user friendly. Site performance has also drastically improved thanks to new hardware, improved database design, and of course the fact that ADF has made great strides in runtime performance. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: Within a large company, I’m sure there is always going to be competition for large projects, as there was here. Once we got through the technical analysis and settled on the technology choices, it was actually no resistance to implementing the solution. This project was fully driven by the business with the aim of long term growth. I can confidently say that the fact that this project was given the utmost importance by both the business and IT really help put down any resistance that you would typically see while implementing a new solution. Q: Given the performance, what do you estimate to be the top end capacity of the system? A:I think our top end capacity is really only limited by our hardware. I’m comfortable saying we could grow 10x on our current hardware, both in terms of transactions and users. We can easily spin up new JVM instances if needed. We already use less JVM’s than we had planned. In addition, ADF is doing a very good job with his connection pooling and application module pooling, so we see a very good ratio of users connected to the systems vs db connections, without impacting performace. Q: What's the overview or summary of feedback from the users interacting with the site?A: Feedback has been overwhelmingly positive from both the business and our customers. They’re very happy with the new SSO environment , the new LAF, and the performance of the site. Of course, it’s not all roses. No matter what, there are always going to be people that don’t like the layout or the color scheme, etc. By and large though, customers are happy and the business is happy. Q: Can you describe the impressions about the site before and after the project within Qualcomm?A: Before the project, the site worked and people were using it, but most people were not happy with it. It was slow and tended to be a bit tempermental, for example a user would perform a transaction and the system would throw and unexpected error. The user could back up and retry the steps and things would work fine, so why didn’t work the first time?. From a UI perspective, we’d hear comments like it looked like it was built by a high school student.  Vince Casarez & Gourav Goyal, Keste Q: Did you run into any obstacles when implementing the solution?A: It's interesting some people call them "obstacles" on this project we just called them "dependencies".  There were both technical and business related dependencies that we had to work out. Mike points out the SSO dependencies and the coordination and synchronization between the teams to have a seamless login experience and a seamless end user experience.  There was also a set of dependencies on the User Acceptance testing to make sure that everyone understood the use cases for how the system would be used.  With a branching into a new market and trying to match a simple user experience as many consumer sites have today, there was always a tendency for the team members to provide their suggestions on how things could be simpler.  But with all the work up front on the user design and getting the business driving this set of experiences, this minimized the downstream suggestions that tend to distract a team.  In this case, all the work up front allowed us to enumerate the "dependencies" and keep the distractions to a minimum. Q: Was there a lot of custom work that needed to be done for this particular solution?A: The focus for this particular solution was really on the custom processes. The interesting thing is that with the data flows and the integration with applications, there are some pre-built integrations, but realistically for the process flow, we had to build those. The framework and tooling we used made things easier so we didn’t have to implement core functionality, like transitioning from screen to screen or from flow to flow. The design feature of Task Flows really helped speed the development and keep the component infrastructure in line with the dynamic processes.  Task flows and other elements like Skins are core to the infrastructure or technology stack of Oracle. This then allowed the team to center the project focus around the business flows and use cases to meet the core requirements and keep the project on time. Q: What do you think were the keys to success for rolling out WebCenter?A:  The 5 main keys to success were: 1) Sponsorship from the whole organization around this project from senior executive agreement, business owners driving functionality, and IT development alignment; 2) Upfront design planning and use case definition to clearly define the project scope and requirements; 3) Focussed development and project management aligned with the top level goals and drivers; 4) User acceptance and usability testing along the way to identify potential issues and direct resolution of the issues;  and 5) Constant prioritization of the issues for development to fix by the business.  It also helps to have great team chemistry and really smart people working on the project. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter from Oracle WebCenter

    Read the article

  • Building an OpenStack Cloud for Solaris Engineering, Part 1

    - by Dave Miner
    One of the signature features of the recently-released Solaris 11.2 is the OpenStack cloud computing platform.  Over on the Solaris OpenStack blog the development team is publishing lots of details about our version of OpenStack Havana as well as some tips on specific features, and I highly recommend reading those to get a feel for how we've leveraged Solaris's features to build a top-notch cloud platform.  In this and some subsequent posts I'm going to look at it from a different perspective, which is that of the enterprise administrator deploying an OpenStack cloud.  But this won't be just a theoretical perspective: I've spent the past several months putting together a deployment of OpenStack for use by the Solaris engineering organization, and now that it's in production we'll share how we built it and what we've learned so far.In the Solaris engineering organization we've long had dedicated lab systems dispersed among our various sites and a home-grown reservation tool for developers to reserve those systems; various teams also have private systems for specific testing purposes.  But as a developer, it can still be difficult to find systems you need, especially since most Solaris changes require testing on both SPARC and x86 systems before they can be integrated.  We've added virtual resources over the years as well in the form of LDOMs and zones (both traditional non-global zones and the new kernel zones).  Fundamentally, though, these were all still deployed in the same model: our overworked lab administrators set up pre-configured resources and we then reserve them.  Sounds like pretty much every traditional IT shop, right?  Which means that there's a lot of opportunity for efficiencies from greater use of virtualization and the self-service style of cloud computing.  As we were well into development of OpenStack on Solaris, I was recruited to figure out how we could deploy it to both provide more (and more efficient) development and test resources for the organization as well as a test environment for Solaris OpenStack.At this point, let's acknowledge one fact: deploying OpenStack is hard.  It's a very complex piece of software that makes use of sophisticated networking features and runs as a ton of service daemons with myriad configuration files.  The web UI, Horizon, doesn't often do a good job of providing detailed errors.  Even the command-line clients are not as transparent as you'd like, though at least you can turn on verbose and debug messaging and often get some clues as to what to look for, though it helps if you're good at reading JSON structure dumps.  I'd already learned all of this in doing a single-system Grizzly-on-Linux deployment for the development team to reference when they were getting started so I at least came to this job with some appreciation for what I was taking on.  The good news is that both we and the community have done a lot to make deployment much easier in the last year; probably the easiest approach is to download the OpenStack Unified Archive from OTN to get your hands on a single-system demonstration environment.  I highly recommend getting started with something like it to get some understanding of OpenStack before you embark on a more complex deployment.  For some situations, it may in fact be all you ever need.  If so, you don't need to read the rest of this series of posts!In the Solaris engineering case, we need a lot more horsepower than a single-system cloud can provide.  We need to support both SPARC and x86 VM's, and we have hundreds of developers so we want to be able to scale to support thousands of VM's, though we're going to build to that scale over time, not immediately.  We also want to be able to test both Solaris 11 updates and a release such as Solaris 12 that's under development so that we can work out any upgrade issues before release.  One thing we don't have is a requirement for extremely high availability, at least at this point.  We surely don't want a lot of down time, but we can tolerate scheduled outages and brief (as in an hour or so) unscheduled ones.  Thus I didn't need to spend effort on trying to get high availability everywhere.The diagram below shows our initial deployment design.  We're using six systems, most of which are x86 because we had more of those immediately available.  All of those systems reside on a management VLAN and are connected with a two-way link aggregation of 1 Gb links (we don't yet have 10 Gb switching infrastructure in place, but we'll get there).  A separate VLAN provides "public" (as in connected to the rest of Oracle's internal network) addresses, while we use VxLANs for the tenant networks. One system is more or less the control node, providing the MySQL database, RabbitMQ, Keystone, and the Nova API and scheduler as well as the Horizon console.  We're curious how this will perform and I anticipate eventually splitting at least the database off to another node to help simplify upgrades, but at our present scale this works.I had a couple of systems with lots of disk space, one of which was already configured as the Automated Installation server for the lab, so it's just providing the Glance image repository for OpenStack.  The other node with lots of disks provides Cinder block storage service; we also have a ZFS Storage Appliance that will help back-end Cinder in the near future, I just haven't had time to get it configured in yet.There's a separate system for Neutron, which is our Elastic Virtual Switch controller and handles the routing and NAT for the guests.  We don't have any need for firewalling in this deployment so we're not doing so.  We presently have only two tenants defined, one for the Solaris organization that's funding this cloud, and a separate tenant for other Oracle organizations that would like to try out OpenStack on Solaris.  Each tenant has one VxLAN defined initially, but we can of course add more.  Right now we have just a single /24 network for the floating IP's, once we get demand up to where we need more then we'll add them.Finally, we have started with just two compute nodes; one is an x86 system, the other is an LDOM on a SPARC T5-2.  We'll be adding more when demand reaches the level where we need them, but as we're still ramping up the user base it's less work to manage fewer nodes until then.My next post will delve into the details of building this OpenStack cloud's infrastructure, including how we're using various Solaris features such as Automated Installation, IPS packaging, SMF, and Puppet to deploy and manage the nodes.  After that we'll get into the specifics of configuring and running OpenStack itself.

    Read the article

< Previous Page | 208 209 210 211 212 213 214 215 216 217 218 219  | Next Page >