folder permissions - Page 213

Publishing my Website to my Local Disk Causes Exceptions to show Paths including my Local Disk

- by coffeeaddict

I've published my website many times. But didn't think about this though until I came across this issue. So I decided to publish my WAP project to a local folder on my C drive first. Then used FTP to upload it to my shared host on discountasp.net. I noticed during runtime that the stack trace was referencing that local folder still and erroring out. Anyone know what config settings are affected when publishing? Obviously something is still pointing to my local C drive and I've searched my entire solution and don't see why. Here's the runtime error I get when my code tries to run in discountasp.net's web server Cannot write into the public directory - check permissions Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: ScrewTurn.Wiki.PluginFramework.InvalidConfigurationException: Cannot write into the public directory - check permissions Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [InvalidConfigurationException: Cannot write into the public directory - check permissions] ScrewTurn.Wiki.SettingsStorageProvider.Init(IHostV30 host, String config) in C:\www\Wiki\Screwturn3_0_2_509\Core\SettingsStorageProvider.cs:90 ScrewTurn.Wiki.StartupTools.Startup() in C:\www\Wiki\Screwturn3_0_2_509\Core\StartupTools.cs:69 ScrewTurn.Wiki.Global.Application_BeginRequest(Object sender, EventArgs e) in C:\www\Wiki\Screwturn3_0_2_509\WebApplication\Global.asax.cs:29 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +68 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75 Discountasp says it's not a permission issue but obviously it is. I think /Wiki should work...but it's not. Here's my site viewed in FTP on discountasp.net's server:

Read the article

asp.net Membership : Extending Role membership?

- by mark smith

Hi there, I am been taking a look at asp.net membership and it seems to provide everything that i need but i need some kind of custom Role functionality. Currently i can add user to a role, great. But i also need to be able to add Permissions to Roles.. i.e. Role: Editor Permissions: Can View Editor Menu, Can Write to Editors Table, Can Delete Entries in Editors Table. Currently it doesn't support this, The idea behind this is to create a admin option in my program to create a role and then assign permissions to a role to say "allow the user to view a certain part of the application", "allow the user to open a menu item" Any ideas how i would implement soemthing like this? I presume a custom ROLE provider but i was wondering if some kind of framework extension existed already without rolling my own? Or anybody knows a good tutorial of how to tackle this issue? I am quite happy with what asp.net SQL provider has created in terms of tables etc... but i think i need to extend this by adding another table called RolesPermissions and then I presume :-) adding some kind of enumeration into the table for each valid permission?? THanks in advance

Read the article

Using Active Directory to authenticate users in a WWW facing website

- by Basiclife

Hi, I'm looking at starting a new web app which needs to be secure (if for no other reason than that we'll need PCI accreditation at some point). From previous experience working with PCI (on a domain), the preferred method is to use integrated windows authentication which is then passed all the way through the app to the database. This allows for better auditing as well as object-level permissions (ie an end user can't read the credit card table). There are advantages in that even if someone compromises the webserver, they won't be able to glean any additional information from the database. Also, the webserver isn't storing any database credentials (beyond perhaps a simple anonymous user with very few permissions) So, now I'm looking at the new web app which will be on the public internet. One suggestion is to have a Active Directory server and create windows accounts on the AD for each user of the site. These users will then be placed into the appropriate NT groups to decide which DB permissions they should have (and which pages they can access). ASP already provides the AD membership provider and role provider so this should be fairly simple to implement. There are a number of questions around this - Scalability, reliability, etc... and I was wondering if there is anyone out there with experience of this approach or, even better, some good reasons why to do it / not to do it. Any input appreciated Regards Basiclife

Read the article

Assigning specific menu administration rights for roles in drupal

- by Martin Andersson

Hello folks. I'm trying to give one of my roles the administrative rights to add/remove content in a specific menu (but not all menus). I think I found a module that should enable something like this, http://drupalmodules.com/module/delegate-menu-administration I've followed the instructions, added the role to my user, checked the "administer some menus" value for that role and checked the "Make admin" field for that role and specific menu in Menus. I also gave the role permissions to change page and story content. However, it still wont let the user add any new content it creates in any menu, and I get an error message saying "warning: Invalid argument supplied for foreach() in /home/martin/www/drupal/modules/delegate_menu_admin/delegate_menu_admin.module on line 346." Line 346 looks like this: foreach ($form['menu']['parent']['#options'] as $key => $value) { I did a print_r($form); in the file just before it and there's no such array that I can see: [menu] => Array ( [#access] => 1 [delete] => Array ( [#access] => ) ) When I gave the role "administer menu" permissions, nothing extra was printed at all, leading me to the assumption that the delegate_menu_admin.module file is not used at all while both the "administer menu" and the "administer some menus" (from the delegate-menu-administration module) permissions are set! Is this some incompatibility between the module because of some drupal update? Or am I just too tired and too stupid? :)

Read the article

Drupal advanced ACLs for "untrusted" administrators

- by redShadow

I have a multi-site Drupal-6 installation containing websites of different customers. On each site, there is an "administrator" role that includes mainly the customer's account. We want to give as many permissions as possible to this privileged user, but this could bring to security leaks using just the Drupal Core permissions management system. The main thing to avoid is the customer account being able to run PHP code on the server (that would be like being logged on the server as the www-data user.. sounds really bad). To avoid that, it is not sufficient to deny PHP code evaluation for the role. Since the administrator role must have permissions to manage users, he could also change the password of the user #1 and login in the site as superadmin. The second goal would be to deny also some "confusing" administrative pages (such as module selection) but not others (such as site informations configuration, or theme selection, etc.) I found the User One module that seems to fix the first problem, but I have no idea on how to solve the second one. I found some modules around, but no-one seems to fit.. it seems like the most ACLs are thought to protect the content, and not the site itself, as if the site administrator would always be the server owner itself..

Read the article

Using IAM for user authentication

- by mdavis6890

I've read lots and lots of posts that touch on what I think should be a very common use case - but without finding exactly what I want, or a simple reason why it can't be done. I have some files on S3. I want to be able to grant certain users access to certain files, via a front end that I build. So far, I've made it work this way: I built the front end in Django, using it's built-in Users and Groups I have a model for Buckets, in which I mirror my S3 buckets. I have a m2m relationship from groups to buckets representing the S3 permissions. The user logs in and authenticates against Django's users. I grab from Django the list of buckets that the user is allowed to see I use boto to grab a list of links to files from those buckets and display to user. This works, but isn't ideal, and also just doesn't feel right. I've got to keep a mirror of the buckets, and I also have to maintain my own list of user/passwords and permissions, when AWS already has all that built in. What I really want is to simply create the users in IAM and use group permissions in IAM to control access to the S3 buckets. No duplication of data or function. My app would request a UN/PW from the user and use that to connect to IAM/S3 to pull the list of buckets and files, then display links to the user. Simple. How can I, or why can't I? Am I looking at this the wrong way? What's the "right" way to address this (I assume) very common use case?

Read the article

HTML Helper/Text Box validation

- by slandau

I have this input on the view: <%= Html.TextBoxCurrentDateWithoutPermission("EffectiveDate", Model.EffectiveDate.HasValue ? Model.EffectiveDate.Value.ToString("dd-MMM-yyyy") : "", new string[] { PERMISSIONS.hasICAdvanced }, new { @class = "economicTextBox", propertyName = "EffectiveDate", onchange = "parseAndSetDt(this); ", dataType = "Date" })%> Here is the custom HTML Helper: public static MvcHtmlString TextBoxCurrentDateWithoutPermission( this HtmlHelper htmlHelper, string name, object value, string[] permissions, object htmlAttributes ) { foreach (string permission in permissions) { if (Chatham.Web.UI.Extranet.SessionManager.DisplayUser.IsInRole(permission)) { // the user has the permission => render the textbox return htmlHelper.TextBox(name, value, htmlAttributes); } } // the user has no permission => render a readonly checkbox var mergedHtmlAttributes = new RouteValueDictionary(htmlAttributes); mergedHtmlAttributes["disabled"] = "disabled"; return htmlHelper.TextBox(name, value == "" ? DateTime.Now : value, mergedHtmlAttributes); } The way this works now is, when a user does NOT have the permission passed in, the box is disabled. The way it needs to be -- if the user does NOT have the permission passed in, it needs to be enabled, however the only dates it can accept are todays date AND dates in the future. So I need JQuery validation (or just plain JS), for this textbox on the page for the following case: If the textbox is enabled AND the user does not have the permission, allow the user to input the current date or future dates ONLY.

Read the article

Visual SourceSafe (VSS): "Access to file (filename) denied" error

- by tk-421

Hi, can anybody help with the above SourceSafe error? I've spent hours trying to find a fix. I've also Googled the heck out of it but couldn't find a scenario matching mine, because in my case only a few files (not all) are affected. Here's what I found: only a few files in my project generate this error other files in the same directory (for example, App_Code has one of the problem files) work fine I've tried checking out from both the VSS client and Visual Studio another developer can check out the main problem file without any problems This sounds like a permission issue for my user, right? However: I found the location of one of the problem files in VSS's data directory (using VSS's naming format, as in 'fddaaaaa.a') and checked its permissions; everything looks fine and its permissions match those of other files I can check out successfully I can see no differences in the file properties between working and non-working files What else can I check? Has anyone encountered this problem before and found a solution? Thanks. P.S.: SourceGear, svn or git are not options, unfortunately. P.P.S.: Tried unsuccessfully to add tag "sourcesafe." EDIT: Hey Paddy, I tried to click 'add comment' to respond to your comment, but I'm getting a javascript error when loading this page in IE8 ("jquery undefined," etc.) so this isn't working. This is when checking out files, and yes, I've obliterated my local copy more times than I can remember. ;) EDIT 2: Thanks for the responses, guys (again I can't 'add comment' due to jQuery not loading, maybe blocked as discussed in Meta). If the problem was caused by antivirus or a bad disk, would other users still be able to check out the file(s)? That's the case here, which makes me think it's a permission issue specific to my account. However I've looked at the permissions and they match both other users' settings and settings on other files which I can check out.

Read the article

How can I get git to work with a remote server?

- by Adrienne

I am the CM person for a small company that just started using Git. We have two Git repositories currently hosted on a Windows box that is our all-purpose Windows server. But, we just set up a dedicated server for our CM software on an Ubuntu Linux server named "Callisto". So I created a test Git repository on Callisto. I gave its directory all of the proper permissions recursively. I had the sysadmin create a login for me on Callisto, and I created a key to use for logging in via SSH. I set up my key to use a passphrase; I don't know if that could be contributing to my problems? Anyway, I know my SSH login works because I tested it through puTTY. But, even after hours of trials and head scratching, I can't get my Windows Git bash (mSysGit) to talk to Callisto for the purposes of pushing or pulling Callisto's git repository files. I keep getting "Fatal error. The remote end hung up unexpectedly." And I've even gotten the error that Git doesn't recognize the test repository on Callisto as a git repository. I read online that the "Fatal error...hung up unexpectedly" is usually a problem with the server connection or permissions. So what am I missing or overlooking here? And why doesn't a pull using the git:// protocol work, since that only uses read-only access? Group and public permissions for the git repository's directory on Callisto are set to read and execute, but not write. If anyone could help, I would be so grateful. Thank you.

Read the article

.NET Embedded Manifest Crashes XP

- by Alan Spark

Hi, I am embedding a manifest in a .NET exe so that it can request elevated permissions in Vista and Windows 7. The manifest that I am using is as follows: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" name="ElevationTest" type="win32"/> <trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"> <security> <requestedPrivileges> <requestedExecutionLevel level="requireAdministrator"/> </requestedPrivileges> </security> </trustInfo> </assembly> It works as expected in Vista and Windows 7 but crashes XP with the standard "... has encountered a problem and needs to close..." error. If I don't embed any manifest then it works as expected but will obviously not have the required permissions in Vista and Windows 7. What is a standard way of producing an exe that will function with the correct permissions in XP and Vista / Windows 7? Thanks, Alan

Read the article

call FB.login() after FB.init() automatically

- by Tobi Projectx

i`m developing an app for Facebook. My Code: function init() { window.fbAsyncInit = function() { var appID = 'xxxxxxxxxxxxxxxxxxxxxxxxxx'; FB.init({ appId: appID, status: true, cookie: true, xfbml: true}); login(); }; (function() { var e = document.createElement("script"); e.async = true; e.src = "https://connect.facebook.net/en_US/all.js?xfbml=1"; document.getElementById("fb-root").appendChild(e); }()); }; function login() { FB.login(function(response) { if (response.session) { if (response.perms) { // user is logged in and granted some permissions. // perms is a comma separated list of granted permissions } else { // user is logged in, but did not grant any permissions } } else { // user is not logged in } }, {perms:'read_stream,publish_stream,offline_access'}); }; I want to call the "init" function and after "init" should call the "login" function (open up the Facebook Login Window) automatically. But i always get "b is null" FB.provide('',{ui:function(f,b){if(!f....onent(FB.UIServer._resultToken));}}); Error in Firebug. Can anybody help me? Does anybody have the same problem? Thanks

Read the article

How to map this class in NHibernate (not FluentNHibernate)?

- by JMSA

Suppose I have a database like this: This is set up to give role-wise menu permissions. Please note that, User-table has no direct relationship with Permission-table. Then how should I map this class against the database-tables? class User { public int ID { get; set; } public string Name { get; set; } public string Username { get; set; } public string Password { get; set; } public bool? IsActive { get; set; } public IList<Role> RoleItems { get; set; } public IList<Permission> PermissionItems { get; set; } public IList<string> MenuItemKeys { get; set; } } This means, (1) Every user has some Roles. (2) Every user has some Permissions (depending on to Roles). (3) Every user has some permitted MenuItemKeys (according to Permissions). How should my User.hbm.xml look like?

Read the article

Uploadify Hanging at random on 100%

- by Matty

I am using Uploadify (http://www.uploadify.com/) to enable my users to upload images via my web application. The problem I am having is that every now and then (at what appears to be random) when the progress bar reaches 100% it 'hangs' and does nothing. I was wondering if any developers familiar with uploadify may have any idea how to solve this? I am in desperate need of some help. Here is my front-end code: jQuery(document).ready(function() { jQuery("#uploadify").uploadify({ 'uploader' : 'javascripts/uploadify.swf', 'script' : 'upload-file2.php', 'cancelImg' : 'css/images/cancel.png', 'folder' : 'uploads/personal_images/' + profileOwner, 'queueID' : 'fileQueue', 'auto' : true, 'multi' : true, 'fileDesc' : 'Image files', 'fileExt' : '.jpg;.jpeg;.gif;.png', 'sizeLimit' : '2097152', 'onComplete': function(event, queueID, fileObj, response, data) { processPersonalImage(fileObj.name); arrImgNames.push(fileObj.name); showUploadedImages(true); document.getElementById("photos").style.backgroundImage = "url('css/images/minicam.png')"; }, 'onAllComplete' : function() { completionMessage(arrFailedNames); document.getElementById("displayImageButton").style.display = "inline"; document.getElementById("photos").style.backgroundImage = "url('css/images/minicam.png')"; }, 'onCancel' : function() { arrImgNames.push(fileObj.name); arrFailedNames.push(fileObj.name); showUploadedImages(false); }, 'onError' : function() { arrImgNames.push(fileObj.name); arrFailedNames.push(fileObj.name); showUploadedImages(false); } }); }); And server side: if (!empty($_FILES)) { //Get user ID from the file path for use later.. $userID = getIdFromFilePath($_REQUEST['folder'], 3); $row = mysql_fetch_assoc(getRecentAlbum($userID, "photo_album_personal")); $subFolderName = $row['pk']; //Prepare target path / file.. $tempFile = $_FILES['Filedata']['tmp_name']; $targetPath = $_SERVER['DOCUMENT_ROOT'] . $_REQUEST['folder'] . '/'.$subFolderName.'/'; $targetFile = str_replace('//','/',$targetPath) . $_FILES['Filedata']['name']; //Move uploaded file from temp directory to new folder move_uploaded_file($tempFile,$targetFile); //Now add a record to DB to reflect this personal image.. if(file_exists($targetFile)) { //add photo record to DB $directFilePath = $_REQUEST['folder'] . '/'.$subFolderName.'/' . $_FILES['Filedata']['name']; addPersonalPhotoRecordToDb($directFilePath, $row['pk']); } echo "1"; die(true); } thanks for any help!!

Read the article

how to use kml file in my code..

- by zjm1126

i download a kml file : <?xml version="1.0" encoding="UTF-8"?> <kml xmlns="http://www.opengis.net/kml/2.2"> <Document> <Style id="transGreenPoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7d00ff00</color> </PolyStyle> </Style> <Style id="transYellowPoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7d00ffff</color> </PolyStyle> </Style> <Style id="transRedPoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7d0000ff</color> </PolyStyle> </Style> <Style id="transBluePoly"> <LineStyle> <width>1.5</width> </LineStyle> <PolyStyle> <color>7dff0000</color> </PolyStyle> </Style> <Folder> <name>Placemarks</name> <open>0</open> <Placemark> <name>Simple placemark</name> <description>Attached to the ground. Intelligently places itself at the height of the underlying terrain.</description> <Point> <coordinates>-122.0822035425683,37.42228990140251,0</coordinates> </Point> </Placemark> <Placemark> <name>Descriptive HTML</name> <description><![CDATA[Click on the blue link!<br/><br/> Placemark descriptions can be enriched by using many standard HTML tags.<br/> For example: <hr/> Styles:<br/> <i>Italics</i>, <b>Bold</b>, <u>Underlined</u>, <s>Strike Out</s>, subscript<sub>subscript</sub>, superscript<sup>superscript</sup>, <big>Big</big>, <small>Small</small>, <tt>Typewriter</tt>, <em>Emphasized</em>, <strong>Strong</strong>, <code>Code</code> <hr/> Fonts:<br/> <font color="red">red by name</font>, <font color="#408010">leaf green by hexadecimal RGB</font> <br/> <font size=1>size 1</font>, <font size=2>size 2</font>, <font size=3>size 3</font>, <font size=4>size 4</font>, <font size=5>size 5</font>, <font size=6>size 6</font>, <font size=7>size 7</font> <br/> <font face=times>Times</font>, <font face=verdana>Verdana</font>, <font face=arial>Arial</font><br/> <hr/> Links: <br/> <a href="http://earth.google.com/">Google Earth!</a> <br/> or: Check out our website at www.google.com <hr/> Alignment:<br/> <p align=left>left</p> <p align=center>center</p> <p align=right>right</p> <hr/> Ordered Lists:<br/> <ol><li>First</li><li>Second</li><li>Third</li></ol> <ol type="a"><li>First</li><li>Second</li><li>Third</li></ol> <ol type="A"><li>First</li><li>Second</li><li>Third</li></ol> <hr/> Unordered Lists:<br/> <ul><li>A</li><li>B</li><li>C</li></ul> <ul type="circle"><li>A</li><li>B</li><li>C</li></ul> <ul type="square"><li>A</li><li>B</li><li>C</li></ul> <hr/> Definitions:<br/> <dl> <dt>Google:</dt><dd>The best thing since sliced bread</dd> </dl> <hr/> Centered:<br/><center> Time present and time past<br/> Are both perhaps present in time future,<br/> And time future contained in time past.<br/> If all time is eternally present<br/> All time is unredeemable.<br/> </center> <hr/> Block Quote: <br/> <blockquote> We shall not cease from exploration<br/> And the end of all our exploring<br/> Will be to arrive where we started<br/> And know the place for the first time.<br/> <i>-- T.S. Eliot</i> </blockquote> <br/> <hr/> Headings:<br/> <h1>Header 1</h1> <h2>Header 2</h2> <h3>Header 3</h3> <h3>Header 4</h4> <h3>Header 5</h5> <hr/> Images:<br/> <i>Remote image</i><br/> <img src="http://code.google.com/apis/kml/documentation/googleSample.png"><br/> <i>Scaled image</i><br/> <img src="http://code.google.com/apis/kml/documentation/googleSample.png" width=100><br/> <hr/> Simple Tables:<br/> <table border="1" padding="1"> <tr><td>1</td><td>2</td><td>3</td><td>4</td><td>5</td></tr> <tr><td>a</td><td>b</td><td>c</td><td>d</td><td>e</td></tr> </table> <br/>]]></description> <Point> <coordinates>-122,37,0</coordinates> </Point> </Placemark> </Folder> <Folder> <name>Google Campus - Polygons</name> <open>0</open> <description>A collection showing how easy it is to create 3-dimensional buildings</description> <Placemark> <name>Building 40</name> <styleUrl>#transRedPoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0848938459612,37.42257124044786,17 -122.0849580979198,37.42211922626856,17 -122.0847469573047,37.42207183952619,17 -122.0845725380962,37.42209006729676,17 -122.0845954886723,37.42215932700895,17 -122.0838521118269,37.42227278564371,17 -122.083792243335,37.42203539112084,17 -122.0835076656616,37.42209006957106,17 -122.0834709464152,37.42200987395161,17 -122.0831221085748,37.4221046494946,17 -122.0829247374572,37.42226503990386,17 -122.0829339169385,37.42231242843094,17 -122.0833837359737,37.42225046087618,17 -122.0833607854248,37.42234159228745,17 -122.0834204551642,37.42237075460644,17 -122.083659133885,37.42251292011001,17 -122.0839758438952,37.42265873093781,17 -122.0842374743331,37.42265143972521,17 -122.0845036949503,37.4226514386435,17 -122.0848020460801,37.42261133916315,17 -122.0847882750515,37.42256395055121,17 -122.0848938459612,37.42257124044786,17 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> <Placemark> <name>Building 41</name> <styleUrl>#transBluePoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0857412771483,37.42227033155257,17 -122.0858169768481,37.42231408832346,17 -122.085852582875,37.42230337469744,17 -122.0858799945639,37.42225686138789,17 -122.0858860101409,37.4222311076138,17 -122.0858069157288,37.42220250173855,17 -122.0858379542653,37.42214027058678,17 -122.0856732640519,37.42208690214408,17 -122.0856022926407,37.42214885429042,17 -122.0855902778436,37.422128290487,17 -122.0855841672237,37.42208171967246,17 -122.0854852065741,37.42210455874995,17 -122.0855067264352,37.42214267949824,17 -122.0854430712915,37.42212783846172,17 -122.0850990714904,37.42251282407603,17 -122.0856769818632,37.42281815323651,17 -122.0860162273783,37.42244918858723,17 -122.0857260327004,37.42229239604253,17 -122.0857412771483,37.42227033155257,17 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> <Placemark> <name>Building 42</name> <styleUrl>#transGreenPoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0857862287242,37.42136208886969,25 -122.0857312990603,37.42136935989481,25 -122.0857312992918,37.42140934910903,25 -122.0856077073679,37.42138390166565,25 -122.0855802426516,37.42137299550869,25 -122.0852186221971,37.42137299504316,25 -122.0852277765639,37.42161656508265,25 -122.0852598189347,37.42160565894403,25 -122.0852598185499,37.42168200156,25 -122.0852369311478,37.42170017860346,25 -122.0852643957828,37.42176197982575,25 -122.0853239032746,37.42176198013907,25 -122.0853559454324,37.421852864452,25 -122.0854108752463,37.42188921823734,25 -122.0854795379357,37.42189285337048,25 -122.0855436229819,37.42188921797546,25 -122.0856260178042,37.42186013499926,25 -122.085937287963,37.42186013453605,25 -122.0859428718666,37.42160898590042,25 -122.0859655469861,37.42157992759144,25 -122.0858640462341,37.42147115002957,25 -122.0858548911215,37.42140571326184,25 -122.0858091162768,37.4214057134039,25 -122.0857862287242,37.42136208886969,25 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> <Placemark> <name>Building 43</name> <styleUrl>#transYellowPoly</styleUrl> <Polygon> <extrude>1</extrude> <altitudeMode>relativeToGround</altitudeMode> <outerBoundaryIs> <LinearRing> <coordinates> -122.0844371128284,37.42177253003091,19 -122.0845118855746,37.42191111542896,19 -122.0850470999805,37.42178755121535,19 -122.0850719913391,37.42143663023161,19 -122.084916406232,37.42137237822116,19 -122.0842193868167,37.42137237801626,19 -122.08421938659,37.42147617161496,19 -122.0838086419991,37.4214613409357,19 -122.0837899728564,37.42131306410796,19 -122.0832796534698,37.42129328840593,19 -122.0832609819207,37.42139213944298,19 -122.0829373621737,37.42137236399876,19 -122.0829062425667,37.42151569778871,19 -122.0828502269665,37.42176282576465,19 -122.0829435788635,37.42176776969635,19 -122.083217411188,37.42179248552686,19 -122.0835970430103,37.4217480074456,19 -122.0839455556771,37.42169364237603,19 -122.0840077894637,37.42176283815853,19 -122.084113587521,37.42174801104392,19 -122.0840762473784,37.42171341292375,19 -122.0841447047739,37.42167881534569,19 -122.084144704223,37.42181720660197,19 -122.0842503333074,37.4218170700446,19 -122.0844371128284,37.42177253003091,19 </coordinates> </LinearRing> </outerBoundaryIs> </Polygon> </Placemark> </Folder> <Folder> <name>LineString</name> <open>0</open> <Placemark> <LineString> <tessellate>1</tessellate> <coordinates> -112.0814237830345,36.10677870477137,0 -112.0870267752693,36.0905099328766,0 </coordinates> </LineString> </Placemark> </Folder> <Folder> <name>GroundOverlay</name> <open>0</open> <GroundOverlay> <name>Large-scale overlay on terrain</name> <description>Overlay shows Mount Etna erupting on July 13th, 2001.</description> <Icon> <href>http://code.google.com/apis/kml/documentation/etna.jpg</href> </Icon> <LatLonBox> <north>37.91904192681665</north> <south>37.46543388598137</south> <east>15.35832653742206</east> <west>14.60128369746704</west> </LatLonBox> </GroundOverlay> </Folder> <Folder> <name>ScreenOverlays</name> <open>0</open> <ScreenOverlay> <name>screenoverlay_dynamic_top</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/dynamic_screenoverlay.jpg</href> </Icon> <overlayXY x="0" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="0" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="1" y="0.2" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_dynamic_right</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/dynamic_right.jpg</href> </Icon> <overlayXY x="1" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="1" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="1" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>Simple crosshairs</name> <visibility>0</visibility> <description>This screen overlay uses fractional positioning to put the image in the exact center of the screen</description> <Icon> <href>http://code.google.com/apis/kml/documentation/crosshairs.png</href> </Icon> <overlayXY x="0.5" y="0.5" xunits="fraction" yunits="fraction"/> <screenXY x="0.5" y="0.5" xunits="fraction" yunits="fraction"/> <rotationXY x="0.5" y="0.5" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="pixels" yunits="pixels"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_topright</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/top_right.jpg</href> </Icon> <overlayXY x="1" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="1" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_topleft</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/top_left.jpg</href> </Icon> <overlayXY x="0" y="1" xunits="fraction" yunits="fraction"/> <screenXY x="0" y="1" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_bottomright</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/bottom_right.jpg</href> </Icon> <overlayXY x="1" y="-1" xunits="fraction" yunits="fraction"/> <screenXY x="1" y="0" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> <ScreenOverlay> <name>screenoverlay_absolute_bottomleft</name> <visibility>0</visibility> <Icon> <href>http://code.google.com/apis/kml/documentation/bottom_left.jpg</href> </Icon> <overlayXY x="0" y="-1" xunits="fraction" yunits="fraction"/> <screenXY x="0" y="0" xunits="fraction" yunits="fraction"/> <rotationXY x="0" y="0" xunits="fraction" yunits="fraction"/> <size x="0" y="0" xunits="fraction" yunits="fraction"/> </ScreenOverlay> </Folder> </Document> </kml> and my code is : function initialize() { if (GBrowserIsCompatible()) { var map = new GMap2(document.getElementById("map_canvas")); var center=new GLatLng(39.9493, 116.3975); map.setCenter(center, 13); var geoXml = new GGeoXml("SamplesInMaps.kml");  map.addOverlay(geoXml); } } but ,i don't successful ,, do you know how to do this.. thanks

Read the article

Issues loading SWF with External SWF Files - using SWFObject and ExternalInterface

- by wdense51

I'm having issues with loading a SWF that references external SWF files... The main SWF loads fine if the HTML file is in the same folder as all the SWFs using the following code: <script type="text/javascript" src="../js/swfobject.js"></script> <script type="text/javascript"> var flashvars = {}; var params = { allowScriptAccess: "always" }; params.quality = "high"; params.wmode = "transparent"; var attributes = {id:"IDofSWF", name:"IDofSWF"}; swfobject.embedSWF("event_so_js.swf", "flashContent", "700", "400", "7.0.0", false, flashvars, params, attributes);</script> </head> <body> <div id="flashContent"> <object data="event_so_js.swf" name="IDofSWF" id="IDofSWF" type="application/x-shockwave-flash" width="700" height="400"></object></div> But as soon as I move the HTML file out of that folder to the root folder and update the links, it doesn't load correctly - it seems that it's having trouble with the external SWF files. I did have it successfully load one of the external SWF files directly, but it's having trouble with the main SWF. All of the SWF files are in the same folder, so I don't know why it's having issues. Here's the code for the HTML file when it's in the root folder: <script type="text/javascript" src="js/swfobject.js"></script> <script type="text/javascript"> var flashvars = {}; var params = { allowScriptAccess: "always" }; params.quality = "high"; params.wmode = "transparent"; var attributes = {id:"IDofSWF", name:"IDofSWF"}; swfobject.embedSWF("folio/event_so_js.swf", "flashContent", "700", "400", "9.0.0", false, flashvars, params, attributes);</script> </head> <body> <div id="flashContent"> <object data="folio/event_so_js.swf" name="IDofSWF" id="IDofSWF" type="application/x-shockwave-flash" width="700" height="400"></object></div> There is also a link on the page that calls a function in the actionscript using ExternalInterface, so it could be that causing the issues. The code for the link is: <a href="#" onclick="document.getElementById('IDofSWF').clicky()"> Any help would be awesome, because it's really confusing me.

Read the article

BASH, multiple arrays and a loop.

- by S1syphus

At work, we 7 or 8 hardrives we dispatch over the country, each have unique labels which are not sequential. Ideally drives are plugged in our desktop, then gets folders from the server that correspond to the drive name. Sometimes, only one hard drive gets plugged in sometimes multiples, possibly in the future more will be added. Each is mounts to /Volumes/ and it's identifier; so for example /Volumes/f00, where f00 is the identifier. What I want to happen, scan volumes see if any any of the drives are plugged in, then checks the server to see if the folder exists, if ir does copy folder and recursive folders. Here is what I have so far, it checks if the drive exists in Volumes: #!/bin/sh #Declare drives in the array ARRAY=( foo bar long ) #Get the drives from the array DRIVES=${#ARRAY[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points #I plan to use AFP eventually, but for the sake of ease #using a local mount. ServerMount="BigBlue" #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #Loop through each item in the array and check if exists on /Volumes for (( i=0;i<$DRIVES;i++)); do dir="$BaseDir/${ARRAY[${i}]}" if [ -d "$dir" ]; then echo "$dir exists, you win." else echo "$dir is not attached." fi done What I can't figure out how to do, is how to check the volumes for the server while looping through the harddrive mount points. So I could do something like: #!/bin/sh #Declare drives, and folder location in arrays ARRAY=( foo bar long ) ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) #Get the drives from the array DRIVES=${#ARRAY[@]} SERVERFOLDER=${#ARRAY1[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points ServerMount="BigBlue #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #List the contents from server directory into array ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) echo ${list[@]} for (( i=0;i<$DRIVES;i++)); (( i=0;i<$SERVERFOLDER;i++)); do dir="$BaseDir/${ARRAY[${i}]}" ser="${ARRAY1[${i}]}" if [ "$dir" =~ "$sir" ]; then cp "$sir" "$dir" else echo "$dir is not attached." fi done I know, that is pretty wrong... well very, but I hope it gives you the idea of what I am trying to achieve. Any ideas or suggestions?

Read the article

I need to copy only selected files and folders in PHP

- by OM The Eternity

I am using the following code, in which initially i am taking the difference of two folder structure and then the out put needs to be copied to other folder. here is the code below.. $source = '/var/www/html/copy1'; $mirror = '/var/www/html/copy2'; function scan_dir_recursive($dir, $rel = null) { $all_paths = array(); $new_paths = scandir($dir); foreach ($new_paths as $path) { if ($path == '.' || $path == '..') { continue; } if ($rel === null) { $path_with_rel = $path; } else { $path_with_rel = $rel . DIRECTORY_SEPARATOR . $path; } $full_path = $dir . DIRECTORY_SEPARATOR . $path; $all_paths[] = $path_with_rel; if (is_dir($full_path)) { $all_paths = array_merge( $all_paths, scan_dir_recursive($full_path, $path_with_rel) ); } } return $all_paths; } $diff_paths = array_diff( scan_dir_recursive($mirror), scan_dir_recursive($source) ); /*$diff_path = array_diff($mirror,$original);*/ echo "<pre>Difference ";print_r($diff_paths); foreach($diff_paths as $path) { echo $source1 = "var/www/html/copy2/".$path; echo "<br>"; $des = "var/www/html/copy1/".$path; copy_recursive_dirs($source1, $des); } function copy_recursive_dirs($dirsource, $dirdest) { $dir_handle=opendir($dirsource); mkdir($dirdest,0777); while(false!==($file=readdir($dir_handle))) {/*echo "<pre>"; print_r($file);*/ if($file!="." && $file!="..") { if(is_dir($dirsource.DIRECTORY_SEPARATOR.$file)) { //Copy the file at the same level in the destination folder copy_recursive_dirs($dirsource.DIRECTORY_SEPARATOR.$file, $dirdest.DIRECTORY_SEPARATOR.$file); } else{ //Copy the dir at the same lavel in the destination folder copy ($dirsource.DIRECTORY_SEPARATOR.$file, $dirdest.DIRECTORY_SEPARATOR.$file); } } } closedir($dir_handle); return true; } Whenever I execute the script I get the difference output but do not get the other copy on second folder as per code... Pls help me in rectifying...

Read the article

code doesnot delete specific extra files but deletes all, also no recursion for directory, help me t

- by OM The Eternity

I have to compare two folder structure and with reference of source folder I want to delete all the files/folders present in other destination folder which do not exist in reference source folder, how could i do this? $original = scan_dir_recursive('/var/www/html/copy2'); $mirror = scan_dir_recursive('/var/www/html/copy1'); function scan_dir_recursive($dir) { $all_paths = array(); $new_paths = scandir($dir); foreach ($new_paths as $path) { if ($path == '.' || $path == '..') { continue; } $path = $dir . DIRECTORY_SEPARATOR . $path; if (is_dir($path)) { $all_paths = array_merge($all_paths, scan_dir_recursive($path)); } else { $all_paths[] = $path; } } return $all_paths; } foreach($mirror as $mirr) { if($mirr != '.' && $mirr != '..') { if(!in_array($mirr, $original)) { unlink($mirr); // delete the file } } } The above code shows what i did.. Here My copy1 folder contains extra files than copy2 folders hence i need these extra files to be deleted. Below given output is are arrays of original Mirror and of difference of both.. Original Array ( [0] => /var/www/html/copy2/Copy (5) of New Text Document.txt [1] => /var/www/html/copy2/Copy of New Text Document.txt ) Mirror Array ( [0] => /var/www/html/copy1/Copy (2) of New Text Document.txt [1] => /var/www/html/copy1/Copy (3) of New Text Document.txt [2] => /var/www/html/copy1/Copy (5) of New Text Document.txt ) Difference Array ( [0] => /var/www/html/copy1/Copy (2) of New Text Document.txt [1] => /var/www/html/copy1/Copy (3) of New Text Document.txt [2] => /var/www/html/copy1/Copy (5) of New Text Document.txt ) when i iterate a loop to delete on difference array all files has to be deleted as per displayed output.. how can i rectify this.. the loop for deletion is given below. $dirs_to_delete = array(); foreach ($diff_path as $path) { if (is_dir($path)) { $dirs_to_delete[] = $path; } else { unlink($path); } } while ($dir = array_pop($dirs_to_delete)) { rmdir($dir); }

Read the article

Microsoft Introduces WebMatrix

- by Rick Strahl

originally published in CoDe Magazine Editorial Microsoft recently released the first CTP of a new development environment called WebMatrix, which along with some of its supporting technologies are squarely aimed at making the Microsoft Web Platform more approachable for first-time developers and hobbyists. But in the process, it also provides some updated technologies that can make life easier for existing .NET developers. Let’s face it: ASP.NET development isn’t exactly trivial unless you already have a fair bit of familiarity with sophisticated development practices. Stick a non-developer in front of Visual Studio .NET or even the Visual Web Developer Express edition and it’s not likely that the person in front of the screen will be very productive or feel inspired. Yet other technologies like PHP and even classic ASP did provide the ability for non-developers and hobbyists to become reasonably proficient in creating basic web content quickly and efficiently. WebMatrix appears to be Microsoft’s attempt to bring back some of that simplicity with a number of technologies and tools. The key is to provide a friendly and fully self-contained development environment that provides all the tools needed to build an application in one place, as well as tools that allow publishing of content and databases easily to the web server. WebMatrix is made up of several components and technologies: IIS Developer Express IIS Developer Express is a new, self-contained development web server that is fully compatible with IIS 7.5 and based on the same codebase that IIS 7.5 uses. This new development server replaces the much less compatible Cassini web server that’s been used in Visual Studio and the Express editions. IIS Express addresses a few shortcomings of the Cassini server such as the inability to serve custom ISAPI extensions (i.e., things like PHP or ASP classic for example), as well as not supporting advanced authentication. IIS Developer Express provides most of the IIS 7.5 feature set providing much better compatibility between development and live deployment scenarios. SQL Server Compact 4.0 Database access is a key component for most web-driven applications, but on the Microsoft stack this has mostly meant you have to use SQL Server or SQL Server Express. SQL Server Compact is not new-it’s been around for a few years, but it’s been severely hobbled in the past by terrible tool support and the inability to support more than a single connection in Microsoft’s attempt to avoid losing SQL Server licensing. The new release of SQL Server Compact 4.0 supports multiple connections and you can run it in ASP.NET web applications simply by installing an assembly into the bin folder of the web application. In effect, you don’t have to install a special system configuration to run SQL Compact as it is a drop-in database engine: Copy the small assembly into your BIN folder (or from the GAC if installed fully), create a connection string against a local file-based database file, and then start firing SQL requests. Additionally WebMatrix includes nice tools to edit the database tables and files, along with tools to easily upsize (and hopefully downsize in the future) to full SQL Server. This is a big win, pending compatibility and performance limits. In my simple testing the data engine performed well enough for small data sets. This is not only useful for web applications, but also for desktop applications for which a fully installed SQL engine like SQL Server would be overkill. Having a local data store in those applications that can potentially be accessed by multiple users is a welcome feature. ASP.NET Razor View Engine What? Yet another native ASP.NET view engine? We already have Web Forms and various different flavors of using that view engine with Web Forms and MVC. Do we really need another? Microsoft thinks so, and Razor is an implementation of a lightweight, script-only view engine. Unlike the Web Forms view engine, Razor works only with inline code, snippets, and markup; therefore, it is more in line with current thinking of what a view engine should represent. There’s no support for a “page model” or any of the other Web Forms features of the full-page framework, but just a lightweight scripting engine that works with plain markup plus embedded expressions and code. The markup syntax for Razor is geared for minimal typing, plus some progressive detection of where a script block/expression starts and ends. This results in a much leaner syntax than the typical ASP.NET Web Forms alligator (<% %>) tags. Razor uses the @ sign plus standard C# (or Visual Basic) block syntax to delineate code snippets and expressions. Here’s a very simple example of what Razor markup looks like along with some comment annotations: <!DOCTYPE html> <html> <head> <title></title> </head> <body> <h1>Razor Test</h1>  @DateTime.Now <hr />  @DateTime.Now.ToString("T")  @{ List<string> names = new List<string>(); names.Add("Rick"); names.Add("Markus"); names.Add("Claudio"); names.Add("Kevin"); }  <ul> @foreach(string name in names){ <li>@name</li> } </ul>  @if(true) {  <text> true </text>; } else {  <text> false </text>; } </body> </html> Like the Web Forms view engine, Razor parses pages into code, and then executes that run-time compiled code. Effectively a “page” becomes a code file with markup becoming literal text written into the Response stream, code snippets becoming raw code, and expressions being written out with Response.Write(). The code generated from Razor doesn’t look much different from similar Web Forms code that only uses script tags; so although the syntax may look different, the operational model is fairly similar to the Web Forms engine minus the overhead of the large Page object model. However, there are differences: -Razor pages are based on a new base class, Microsoft.WebPages.WebPage, which is hosted in the Microsoft.WebPages assembly that houses all the Razor engine parsing and processing logic. Browsing through the assembly (in the generated ASP.NET Temporary Files folder or GAC) will give you a good idea of the functionality that Razor provides. If you look closely, a lot of the feature set matches ASP.NET MVC’s view implementation as well as many of the helper classes found in MVC. It’s not hard to guess the motivation for this sort of view engine: For beginning developers the simple markup syntax is easier to work with, although you obviously still need to have some understanding of the .NET Framework in order to create dynamic content. The syntax is easier to read and grok and much shorter to type than ASP.NET alligator tags (<% %>) and also easier to understand aesthetically what’s happening in the markup code. Razor also is a better fit for Microsoft’s vision of ASP.NET MVC: It’s a new view engine without the baggage of Web Forms attached to it. The engine is more lightweight since it doesn’t carry all the features and object model of Web Forms with it and it can be instantiated directly outside of the HTTP environment, which has been rather tricky to do for the Web Forms view engine. Having a standalone script parser is a huge win for other applications as well – it makes it much easier to create script or meta driven output generators for many types of applications from code/screen generators, to simple form letters to data merging applications with user customizability. For me personally this is very useful side effect and who knows maybe Microsoft will actually standardize they’re scripting engines (die T4 die!) on this engine. Razor also better fits the “view-based” approach where the view is supposed to be mostly a visual representation that doesn’t hold much, if any, code. While you can still use code, the code you do write has to be self-contained. Overall I wouldn’t be surprised if Razor will become the new standard view engine for MVC in the future – and in fact there have been announcements recently that Razor will become the default script engine in ASP.NET MVC 3.0. Razor can also be used in existing Web Forms and MVC applications, although that’s not working currently unless you manually configure the script mappings and add the appropriate assemblies. It’s possible to do it, but it’s probably better to wait until Microsoft releases official support for Razor scripts in Visual Studio. Once that happens, you can simply drop .cshtml and .vbhtml pages into an existing ASP.NET project and they will work side by side with classic ASP.NET pages. WebMatrix Development Environment To tie all of these three technologies together, Microsoft is shipping WebMatrix with an integrated development environment. An integrated gallery manager makes it easy to download and load existing projects, and then extend them with custom functionality. It seems to be a prominent goal to provide community-oriented content that can act as a starting point, be it via a custom templates or a complete standard application. The IDE includes a project manager that works with a single project and provides an integrated IDE/editor for editing the .cshtml and .vbhtml pages. A run button allows you to quickly run pages in the project manager in a variety of browsers. There’s no debugging support for code at this time. Note that Razor pages don’t require explicit compilation, so making a change, saving, and then refreshing your page in the browser is all that’s needed to see changes while testing an application locally. It’s essentially using the auto-compiling Web Project that was introduced with .NET 2.0. All code is compiled during run time into dynamically created assemblies in the ASP.NET temp folder. WebMatrix also has PHP Editing support with syntax highlighting. You can load various PHP-based applications from the WebMatrix Web Gallery directly into the IDE. Most of the Web Gallery applications are ready to install and run without further configuration, with Wizards taking you through installation of tools, dependencies, and configuration of the database as needed. WebMatrix leverages the Web Platform installer to pull the pieces down from websites in a tight integration of tools that worked nicely for the four or five applications I tried this out on. Click a couple of check boxes and fill in a few simple configuration options and you end up with a running application that’s ready to be customized. Nice! You can easily deploy completed applications via WebDeploy (to an IIS server) or FTP directly from within the development environment. The deploy tool also can handle automatically uploading and installing the database and all related assemblies required, making deployment a simple one-click install step. Simplified Database Access The IDE contains a database editor that can edit SQL Compact and SQL Server databases. There is also a Database helper class that facilitates database access by providing easy-to-use, high-level query execution and iteration methods: @{ var db = Database.OpenFile("FirstApp.sdf"); string sql = "select * from customers where Id > @0"; } <ul> @foreach(var row in db.Query(sql,1)){ <li>@row.FirstName @row.LastName</li> } </ul> The query function takes a SQL statement plus any number of positional (@0,@1 etc.) SQL parameters by simple values. The result is returned as a collection of rows which in turn have a row object with dynamic properties for each of the columns giving easy (though untyped) access to each of the fields. Likewise Execute and ExecuteNonQuery allow execution of more complex queries using similar parameter passing schemes. Note these queries use string-based queries rather than LINQ or Entity Framework’s strongly typed LINQ queries. While this may seem like a step back, it’s also in line with the expectations of non .NET script developers who are quite used to writing and using SQL strings in code rather than using OR/M frameworks. The only question is why was something not included from the beginning in .NET and Microsoft made developers build custom implementations of these basic building blocks. The implementation looks a lot like a DataTable-style data access mechanism, but to be fair, this is a common approach in scripting languages. This type of syntax that uses simple, static, data object methods to perform simple data tasks with one line of code are common in scripting languages and are a good match for folks working in PHP/Python, etc. Seems like Microsoft has taken great advantage of .NET 4.0’s dynamic typing to provide this sort of interface for row iteration where each row has properties for each field. FWIW, all the examples demonstrate using local SQL Compact files - I was unable to get a SQL Server connection string to work with the Database class (the connection string wasn’t accepted). However, since the code in the page is still plain old .NET, you can easily use standard ADO.NET code or even LINQ or Entity Framework models that are created outside of WebMatrix in separate assemblies as required. The good the bad the obnoxious - It’s still .NET The beauty (or curse depending on how you look at it :)) of Razor and the compilation model is that, behind it all, it’s still .NET. Although the syntax may look foreign, it’s still all .NET behind the scenes. You can easily access existing tools, helpers, and utilities simply by adding them to the project as references or to the bin folder. Razor automatically recognizes any assembly reference from assemblies in the bin folder. In the default configuration, Microsoft provides a host of helper functions in a Microsoft.WebPages assembly (check it out in the ASP.NET temp folder for your application), which includes a host of HTML Helpers. If you’ve used ASP.NET MVC before, a lot of the helpers should look familiar. Documentation at the moment is sketchy-there’s a very rough API reference you can check out here: http://www.asp.net/webmatrix/tutorials/asp-net-web-pages-api-reference Who needs WebMatrix? Uhm… good Question Clearly Microsoft is trying hard to create an environment with WebMatrix that is easy to use for newbie developers. The goal seems to be simplicity in providing a minimal development environment and an easy-to-use script engine/language that makes it easy to get started with. There’s also some focus on community features that can be used as starting points, such as Web Gallery applications and templates. The community features in particular are very nice and something that would be nice to eventually see in Visual Studio as well. The question is whether this is too little too late. Developers who have been clamoring for a simpler development environment on the .NET stack have mostly left for other simpler platforms like PHP or Python which are catering to the down and dirty developer. Microsoft will be hard pressed to win those folks-and other hardcore PHP developers-back. Regardless of how much you dress up a script engine fronted by the .NET Framework, it’s still the .NET Framework and all the complexity that drives it. While .NET is a fine solution in its breadth and features once you get a basic handle on the core features, the bar of entry to being productive with the .NET Framework is still pretty high. The MVC style helpers Microsoft provides are a good step in the right direction, but I suspect it’s not enough to shield new developers from having to delve much deeper into the Framework to get even basic applications built. Razor and its helpers is trying to make .NET more accessible but the reality is that in order to do useful stuff that goes beyond the handful of simple helpers you still are going to have to write some C# or VB or other .NET code. If the target is a hobby/amateur/non-programmer the learning curve isn’t made any easier by WebMatrix it’s just been shifted a tad bit further along in your development endeavor when you run out of canned components that are supplied either by Microsoft or the community. The database helpers are interesting and actually I’ve heard a lot of discussion from various developers who’ve been resisting .NET for a really long time perking up at the prospect of easier data access in .NET than the ridiculous amount of code it takes to do even simple data access with raw ADO.NET. It seems sad that such a simple concept and implementation should trigger this sort of response (especially since it’s practically trivial to create helpers like these or pick them up from countless libraries available), but there it is. It also shows that there are plenty of developers out there who are more interested in ‘getting stuff done’ easily than necessarily following the latest and greatest practices which are overkill for many development scenarios. Sometimes it seems that all of .NET is focused on the big life changing issues of development, rather than the bread and butter scenarios that many developers are interested in to get their work accomplished. And that in the end may be WebMatrix’s main raison d'être: To bring some focus back at Microsoft that simpler and more high level solutions are actually needed to appeal to the non-high end developers as well as providing the necessary tools for the high end developers who want to follow the latest and greatest trends. The current version of WebMatrix hits many sweet spots, but it also feels like it has a long way to go before it really can be a tool that a beginning developer or an accomplished developer can feel comfortable with. Although there are some really good ideas in the environment (like the gallery for downloading apps and components) which would be a great addition for Visual Studio as well, the rest of the development environment just feels like crippleware with required functionality missing especially debugging and Intellisense, but also general editor support. It’s not clear whether these are because the product is still in an early alpha release or whether it’s simply designed that way to be a really limited development environment. While simple can be good, nobody wants to feel left out when it comes to necessary tool support and WebMatrix just has that left out feeling to it. If anything WebMatrix’s technology pieces (which are really independent of the WebMatrix product) are what are interesting to developers in general. The compact IIS implementation is a nice improvement for development scenarios and SQL Compact 4.0 seems to address a lot of concerns that people have had and have complained about for some time with previous SQL Compact implementations. By far the most interesting and useful technology though seems to be the Razor view engine for its light weight implementation and it’s decoupling from the ASP.NET/HTTP pipeline to provide a standalone scripting/view engine that is pluggable. The first winner of this is going to be ASP.NET MVC which can now have a cleaner view model that isn’t inconsistent due to the baggage of non-implemented WebForms features that don’t work in MVC. But I expect that Razor will end up in many other applications as a scripting and code generation engine eventually. Visual Studio integration for Razor is currently missing, but is promised for a later release. The ASP.NET MVC team has already mentioned that Razor will eventually become the default MVC view engine, which will guarantee continued growth and development of this tool along those lines. And the Razor engine and support tools actually inherit many of the features that MVC pioneered, so there’s some synergy flowing both ways between Razor and MVC. As an existing ASP.NET developer who’s already familiar with Visual Studio and ASP.NET development, the WebMatrix IDE doesn’t give you anything that you want. The tools provided are minimal and provide nothing that you can’t get in Visual Studio today, except the minimal Razor syntax highlighting, so there’s little need to take a step back. With Visual Studio integration coming later there’s little reason to look at WebMatrix for tooling. It’s good to see that Microsoft is giving some thought about the ease of use of .NET as a platform For so many years, we’ve been piling on more and more new features without trying to take a step back and see how complicated the development/configuration/deployment process has become. Sometimes it’s good to take a step - or several steps - back and take another look and realize just how far we’ve come. WebMatrix is one of those reminders and one that likely will result in some positive changes on the platform as a whole. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET IIS7

Read the article

Stream Media from Windows 7 to XP with VLC Media Player

- by DigitalGeekery

So you’ve got yourself a new computer with Windows 7 and you’re itching to take advantage of it’s ability to stream media across your home network. But, the rest of the family is still on Windows XP and you’re not quite ready to shell out the cash for the upgrades. Well, today we’ll show you how to easily stream media from Windows 7 to Windows XP with VLC Media Player. On the host computer running Windows 7, you’ll need to have an account set up with both a username and password. A blank password will not work. The media files will need to be located in a shared folder. Note: If the media files are located within the Public directory, or within the profile of the user account you use to log into the Windows 7 computer, they will be shared automatically. Sharing your Media Folders On your Windows 7 computer, right-click on the folder containing the files you’d like to stream and choose Properties. On the Sharing Tab of the folder properties, click the Share button. Click OK. Type or select from the drop down the user account you’ll use to log in, or select “Everyone” to share with all users. Then click Add. You may change the permission level, but only Read permission is required to play the media. Repeat this process for any additional folders you wish to share. The Windows XP Client Computer Now that we’ve shared our media folders from the Windows 7 computer, we’re ready to play our files on the Windows XP computer. Download and install the VLC Media Player. (See link below) Then open VLC. Click on Media from the and select Open File… Browse your network for the shared folder that contains your media. You’ll be prompted to log in to the host computer. Provide the credentials for a user on the Windows 7 computer. Click OK. Select your media file and click Open. Your media playback will begin momentarily. This is a nice and easy way to stream media across your home network without upgrading multiple computers to Windows 7. Plus, VLC is certainly no slouch as a Media Player. It’ll play virtually any video or audio file you can throw at it. Have you already upgraded all your home PCs to Windows 7? Check out our previous article on streaming media between Windows 7 computers on your home network. Download VLC Media Player Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Enable Media Streaming in Windows Home Server to Windows Media PlayerInstall and Use the VLC Media Player on Ubuntu LinuxInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images

Read the article

Build Explorer version 1.1 for Visual Studio Team Explorer is released

- by terje

Our free extension to Visual Studio , the folder based Build Explorer Version 1.1 has now been released, and uploaded to the Visual Studio Gallery and Codeplex. We have collected up a few changes and some bugs, as follows: Changes: Queue Default Builds can now be optionally fully enabled, fully disabled or enabled just for leaf nodes (=disabled for folders). If you got a large number of builds it was pretty scary to be able to launch all of them with just one click. However, it is nice to avoid having the dialog box up when you want to just run off a single build. That’s the reasoning between the 3rd choice here. Auto fill-in of the builds at start up and refresh This was a request that came up a lot, and which was also irritating to us. When the Team Project is opened, the Build explorer will start by itself and fill up it’s tree. So you don’t need to click the node anymore. There was also quite a bit of flashing when the tree filled up, this has been reduced to just a single top level fill before it collapses the node. The speed of the buildup of the tree has also been increased. The “All Build Definitions” node is now shown on top of the list Login box appeared in certain cross domain situations. This was a fix for the TF30063 authentication problem we had in the beginning. Hopefully the new code has that fixed properly so that both the login box and the TF30063 are gone forever. Our testing so far seems to indicate it works. If anyone gets a real problem here there are two workarounds: 1) Turn off the auto refresh to reduce the issue. If this doesn’t fix it, then 2) please reinstall the former version (go to the codeplex download site if you don’t have it anymore) Write a comment to this blog post with a description of what happens, and I will send a temporary fix asap. Bug fixes: The folder name matching was case sensitive, so “Application.CI” and “application.CI” created two different folders. View all builds not shown for leaf odes, and view builds didn’t work in all cases. There was some inconsistencies here which have been fixed. Partly fixed: The context menu to queue a new build for disabled builds should be removed, but that was a difficult one, and is still on the list, but the command will not do anything for a disabled build. Using the Queue Default Builds on a folder, and if it had some disabled builds below an error box appeared and ruined the whole experience. As a result of these fixes there has been introduced some new options, as shown below: The two first settings, the Separator symbol and the options for how to handle Queuing of default builds are set per Team Project, and is stored in the TFS source control under the BuildProcessTemplates folder, with the name Inmeta.VisualStudio.BuildExplorer.Settings.xml The next two settings need some explanations. They handle the behavior for the auto update of the build folders. First, these are stored in the local registry per user, at the key HKEY_CURRENT_USER/Software\Inmeta\BuildExplorer. The first option Use Timed Refresh at Startup, if turned off, you will need to click the node as it is done in Version 1.0. The second option is a timed value, the time after the Build explorer node is created and until the scanning of the Build folders start. It is assumed that this is enough, and the tests so far indicates this. If you have very many builds and you see that the explorer don’t get them all, try to increase this value, and of course, notify me of your case, either here or on the Visual Gallery site.

Read the article

Backup and Transfer Foobar2000 to a New Computer

- by Mysticgeek

If you are a fan of Foobar2000 you undoubtedly have tweaked it to the point where you don’t want to set it all up again on a new machine. Here we look at how to transfer Foobar2000 settings to a new Windows 7 machine. Note: For this article we are transferring Foobar2000 settings from on Windows 7 machine to another over a network running Windows Home Server. Foobar2000 Foobar2000 is an awesome music player which is highly customizable and we’ve previously covered. Here we take a look at how it’s set up on the current machine. It’s a nothing flashy, but is set up for our needs and includes a lot of components and playlists. Backup Files Rather than wasting time setting everything up again on a new machine, we can backup the important files and replace them on the new machine. First type or copy the following into the Explorer address bar. %appdata%\foobar2000 Now copy all of the files in the folder and store them on a network drive or some type removable media or device. New Machine Now you can install the latest version of Foobar2000 on your new machine. You can go with a Standard install as we will be replacing our backed up configuration files anyway. When it launches, it will be set with all the defaults…and we want what we had back. Browse to the following on the new machine… %appdata%\foobar2000 Delete all of the files in this directory… Then replace them with the ones we backed up from the other machine. You’ll also want to navigate to C:\Program Files\Foobar2000 and replace the existing Components folder with the backed up one. When you get the screen telling you there is already files of the same name, select Move and Replace, and check the box Do this for the next 6 conflicts. Now we’re back in business! Everything is exactly as it was on the old machine. In this example, we were moving the Foobar2000 files from a computer on the same home network. All the music is coming from a directory on our Windows Home Server so they hadn’t changed. If you’re moving these files to a computer on another machine… say your work computer, you’ll need to adjust where the music folders point to. Windows XP If you’re setting up Foobar2000 on an XP machine, you can enter the following into the Run line. %appdata%\foobar2000 Then copy your backed up files into the Foobar2000 folder, and remember to swap out the Components folder in C:\Program Files\Foobar2000. Confirm to replace the files and folders by clicking Yes to All… Conclusion This method worked perfectly for us on our home network setup. There might be some other things that will need a bit of tweaking, but overall the process is quick and easy. There is a lot of cool things you can do with Foobar2000 like rip an audio CD to FlAC. If you’re a fan of Foobar2000 or considering switching to it, we will be covering more awesome features in future articles. Download Foobar2000 – Windows Only Similar Articles Productive Geek Tips Backup or Transfer Microsoft Office 2007 Quick Parts Between ComputersBackup and Restore Internet Explorer’s Trusted Sites ListSecond Copy 7 [Review]Backup and Restore Firefox Profiles EasilyFoobar2000 is a Fully Customizable Music Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

Read the article

Add the Vista Style Sidebar Back to Windows 7

- by Mysticgeek

If you are moving from Vista to Windows 7, you might miss the Sidebar which was introduced in Vista. Today we take a look at a couple options for getting a Sidebar back in Windows 7. Copy Files from Vista Note: In this example we are using 32-bit versions of Vista and Windows 7. Make sure you are logged in with Administrator credentials. If you have a Vista machine running, we can copy the Windows Sidebar files over to the Windows 7 machine. On the Vista machine navigate to C:\Program Files and copy the Windows Sidebar folder and all of its contents over to a flash drive or network location. On the Windows 7 machine go to C:\Program Files and rename the Windows Sidebar folder to something like Windows Sidebar_old. Now copy the Vista Windows Sidebar folder into C:\Program Files… Now you will have both folders…Windows Sidebar and Windows Sidebar_old in your C:\Program Files folder. Right-click on the desktop and select Gadgets. There you are…the Original Vista Sidebar is back and will act as it did in Vista. Move Sidebar Gadgets Another work around if you don’t have a copy of Vista, you can simply move the Desktop Gadgets you want over to the right side of the screen and they will stay there…no dock needed. Type gadgets into the Search box in the Windows Start Menu and click on Desktop Gadgets. Then drag the included Gadgets you want over to the right side of the screen. Or click on the link to Get more gadgets online to find more. Once you have them where you want, each time you reboot they will still be in the same location. This holds true no matter where you place them on your desktop as well. Install Desktop Sidebar If you want an enhanced sidebar that includes a lot of different features, and don’t have a copy of Vista, you might want to check out Desktop Sidebar Beta (link below). This is a freeware application that works with Windows XP, Vista, and Windows 7. After installation you can access it from the Start Menu… Here is how it will look after you launch it… It includes several pre-installed panels including a clock, Media Player, Search Bar, Slideshow, Messenger, Outlook inbox, Tasks, Quick Launch, Performance…and a lot more. It is highly customizable and allows you to change skins, add various levels of transparency, and a lot more. One caveat with going with Desktop Sidebar is we didn’t find a way to add Windows Gadgets to it (though there might be a plugin for it that we’re not aware of). But there are so many options, you may not mind. However, you can still use the desktop gadgets as you normally would in Windows 7. Believe it or not, some people actually prefer the Vista style Sidebar and would like it back in Windows 7. With these options you can get the Vista Sidebar back if you have a copy of Vista, place the Gadgets on the desktop, or go the freeware route. Download Desktop Sidebar (freeware) Similar Articles Productive Geek Tips Disable Windows Sidebar in VistaHow To Repair Your Crashed or Hanging Vista SidebarApplying Themes To Your Windows Vista SidebarDisable Sidebar / Desktop Gadgets on Windows 7Put AOL Instant Messenger (AIM) In your Windows Sidebar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox)

Read the article

Create Panoramic Photos with Windows Live Photo Gallery

- by Matthew Guay

Have you ever wanted to capture the view from a mountain or the full size of a building? Here’s how you can stitch multiple shots together into the perfect panoramic picture for free with Windows Live Photo Gallery. Getting Started First, make sure you have Windows Live Photo Gallery installed (link below). Live Photo Gallery is part of the Windows Live Essentials suite, you can select other programs to install along with it if you want. Make sure to uncheck setting your home page to MSN and setting your search provider as Bing if you don’t want them changed. Now, make sure you have pictures that will work good for a panorama. These need to be taken from the same spot, and the edges of the pictures need to overlap so the program can find where the pictures connect. Here we have taken pictures inside a building with a cell phone camera. Make your Panorama Open Live Photo Gallery, and find the pictures you want to use in your panorama. It will automatically index and display all of the photos in your Pictures folder or Library if you’re using Windows 7. If your pictures are saved elsewhere, add that folder to Photo Gallery. Click File, Include a folder in the gallery, and select the correct folder at the prompt. Now select all of the pictures that you will use in your panorama. You can easily do this by clicking the checkbox on each picture that appears when you hover over it. Once all of the pictures are selected, click Make in the menu bar and select Create panoramic photo… Alternately, right-click on any of the pictures you’ve selected, and click Create panoramic photo… Live Photo Gallery will analyze your photos and compost them together to create a panorama. The amount of time it takes will vary depending on the number of photos, size of the pictures, and computer speed. When it’s finished making the panorama, you’ll be prompted to enter a file name and save the picture. Your new panorama picture will open as soon as it’s saved. Depending on your shots, the picture may have quite a bit of black space around the edges where each picture didn’t cover the exact same amount of area. To correct this, click Fix on the menu bar, and then select Crop Photo in the sidebar that opens. Select the center of the picture with the crop tool, and click Apply when you’ve got the selection you want. Live Photo Gallery automatically saves your picture changes, and you can revert back to the original picture if you wish. Now you’ve got a nice panoramic shot, trimmed and ready to print, share, and more. Conclusion Panoramic shots are great ways to capture your whole surroundings, whether it’s a sports stadium, mall, or a scenic mountain view. They can also be a great way to capture more with low-resolution cameras. Link Download Windows Live Photo Gallery Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesLearning Windows 7: Manage Photos with Live Photo GalleryEasily Re-Size Photos in Windows Vista or XPInstall Windows Live Essentials In Windows 7Convert Photos to Flash for Your Website TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

Read the article

Pimp my Silverlight Firestarter

- by mbcrump

So Silverlight Firestarter is over and your sitting on your couch thinking… what now? Well its time to So how exactly can you pimp the Silverlight Firestarter? Well read below and you will find out: 1) Pimp the videos: First we are going to use a program named Juice to download all of the Silverlight Firestarter videos. Go ahead and point your browser to http://juicereceiver.sourceforge.net/ and download the application. It works on Mac, Linux and PC. After it is downloaded you are going to want to add an RSS feed by clicking the button highlighted below. At this point you are going to want to add the following URL inside the textbox and hit Save: http://channel9.msdn.com/Series/Silverlight-Firestarter/RSS This RSS feed includes all the Silverlight Firestarter Labs and Presentations located below. The Future of Silverlight Data Binding Strategies with Silverlight and WP7 Building Compelling Apps with WCF using REST and LINQ Building Feature Rich Business Apps Today with RIA Services MVVM: Why and How? Tips and Patterns using MVVM and Service Patterns with Silverlight and WP7 Tips and Tricks for a Great Installation Experience Tune Your Application: Profiling and Performance Tips Performance Tips for Silverlight Windows Phone 7 Select all the videos and click the Download button located below (has blue arrow): Once all the videos are downloaded you will have about 4.64GB of Silverlight fun. You can now move these videos to your MediaServer and watch them with whatever device you want. Put it on an iPad, iPhone.. emm wait I mean WP7 or WMC7. 2) Pimp the Training Material – Download the offline installer for the labs here. This will give you almost a gig of free training materials. Here is the topics covered: Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7 You will notice that it install Firestarter to the default of C:\Firestarter. So you will have to navigate to that folder and double click on Default.htm to get started. Now if you followed part one of the pimping guide then you will already have all the videos on your pc. You will notice that once you go into the lab you will get a Lab Document and Source at the bottom of the article. Now instead of opening the Source Folder in a web browser you can just copy the folder C:\Firestarter\Labs into your Visual Studio 2010 Project Folder. This will save a lot of time later. 3) Pimp my Silverlight 5 Knowledge – Always keep reading as much as possible and remember that the Silverlight 5 Beta should come Q1 of 2011 and the final release at the end of 2011. Here are 5 great blog post on Silverlight 5. Scott Gu’s Blog Mary Jo’s Article on Silverlight 5 The Future of Silverlight (Official) Kunal Chowdhury Blog Tim Heuer’s Blog Thats all that I got for now. Have fun with all the new Silverlight content. Subscribe to my feed

Search Results

Search found 17202 results on 689 pages for 'folder permissions'.

Page 213/689 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220 | Next Page >

- by coffeeaddict

- by mark smith

- by Basiclife

- by Martin Andersson

- by redShadow

- by mdavis6890

- by slandau

- by tk-421

- by Adrienne

- by Alan Spark

- by Tobi Projectx

- by JMSA

- by Matty

- by zjm1126

- by wdense51

- by S1syphus

- by OM The Eternity

- by OM The Eternity

- by Rick Strahl

- by DigitalGeekery

- by terje

- by Mysticgeek

- by Mysticgeek

- by Matthew Guay

- by mbcrump

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220 | Next Page >