Search Results

Search found 11259 results on 451 pages for 'remote registry'.

Page 213/451 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • Geographically distributed file system with preferred locality

    - by dpb
    Hi All -- I'm building a application that needs to distribute a standard file server across a few sites over a WAN. Basically, each site needs to write a lot of misc files of varying size (some in the 100s MB range, but most small), and the application is written such that collisions aren't a problem. I'd like to have a system set up that meets the following qualifications: Each site can store files in a shared "namespace". That is, all the files would show up in the same filesystem. Each site would not send data over the WAN unless necessary. I.e., there would be local storage on each side of the WAN that would be "merged" into the same logical filesystem. Linux & Free ($$$) is a must. Basically, something like a central NFS share would meet most of the requirements, however it would not allow the locally written data to stay local. All data from remote sides of the WAN would be copied locally all the time. I have looked into Lustre, and have run some successful tests with it, however, it appears to distribute files fairly uniformly across the distributed storage. I have dug through the documentation and have not found anything that automatically will "prefer" local storage over remote storage. Even something that went with the lowest latency storage would be fine. It would work most of the time, which would meet this application's requirements. Any ideas?

    Read the article

  • Is it possible to use rsync over sftp (without an ssh shell)?

    - by Tom Feiner
    Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

    Read the article

  • Media Center setup won't complete for watching TV

    - by Robert
    I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

    Read the article

  • OpenBSD logins via SSH seem to be ignoring my configured radius server

    - by Steve Kemp
    I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

    Read the article

  • administrator user unable to login, suspicious user accounts "sky$", "admin$"

    - by mks
    I have a Windows 2008 R2 Standard (64 bit) running in a virtual machine. Suddenly from yesterday onwards I am not able to login as administrator. Nobody changed the password. Both in the console as well as using remote desktop I am unable to login. Whenever I login as Administrator I am getting this error: "The user name or password is incorrect" Nothing has changed in the machine and I have logged in the past successfully both through console and via remote desktop several time on the same machine. One strange behaviour I noticed is, I am seeing some additional user accounts if I try to login as other user. The suspicious user account are: sky$ admin$ SUPPORT_388945a0 Is it created by some malware/virus? Or is it some windows hidden account? Microsoft site says that SUPPORT_388945a0 is: The Support_388945a0 account enables Help and Support Service interoperability with signed scripts. This account is primarily used to control access to signed scripts that are accessible from within Help and Support Services. Administrators can use this account to delegate the ability for an ordinary user, who does not have administrative access over a computer, to run signed scripts from links embedded within Help and Support Services. These scripts can be programmed to use the Support_388945a0 account credentials instead of the user’s credentials to perform specific administrative operations on the local computer that otherwise would not be supported by the ordinary user’s account. When the delegated user clicks on a link in Help and Support Services, the script executes under the security context of the Support_388945a0 account. This account has limited access to the computer and is disabled by default. However I am not sure from where this "admin$" and "sky$" came. Anyone has similar experience?

    Read the article

  • ADSL to T1, Is it worth it for us?

    - by Jack Hickerson
    The company I work for has roughly 45-55 simultaneous users (local and remote/VPN) logged in at a given time. We currently subscribe to an ADSL connection but we have been experiencing slower upload/download speeds as our number of users increase. So, I have a few questions with regards to upgrading our connection to a t1 line. I am aware that the number of channels on a t1 line are much greater then that of our current ADSL connection, but I have heard that the number of active users on a t1 line should be no greater than ~30 for optimal performance. I would think this statement is dependent on what each user was using the connection for and could change depending on this variable. That being said, I have tried to break down how the line would be used in our organization based on our major departments: Sales (~60% of total users) - Everyday surfing, email, research, occasional streaming media Marketing (~15% of total users) - Heavy reliance on uploading/downloading, streaming media, file sharing Other (~25% of total users) - email, rare use of any connection intensive activities. I have considered keeping the ADSL for our local users and dedicating the t1 to our remote users (or vice versa) but the cost is significantly higher then what we had hoped for. All factors being equal (# of users, frequency of downloads/uploads from our current activities) Would you suspect a significant performance increase in making the transition to a t1 line from our current ADSL line? What are your thoughts or recommendations?

    Read the article

  • VPN issue: SSTP Service service started and then stopped

    - by Ampersand
    When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

    Read the article

  • RoboCopy errors on Windows Server 2008

    - by Steve
    I am getting bizarre error with RoboCopy in Server 2008. It will randomly hang with "The specified network name is no longer available." error. Once that happens, it will continue to fail on the retries. But of course the remote server IS still available on the network and can be reached with other tools. I think it must be somehow permission related but I can't figure out what is wrong. Any ideas would be much appreciated. Other info: Options : *.* /S /E /COPY:DAT /NP /R:10 /W:30 If I turn on the /B option it will fail 100% of the time at the very beginning (that's why I think it has to be somehow permission-related) The two servers are standalone and I am doing a NET USE command prior to the robocopy It does not matter what user account on the remote server. Tried both Administrator and another user which was also a member of the local Administrators group UAC is turned off on both sides It is not always the same file that hangs. Sometimes it will get through half or more and sometimes it will fail on the first file

    Read the article

  • ntop to analyse bandwidth usage on multiple ASA 5505

    - by dunxd
    I have set up a netflow server at our data centre, which is connected via VPN to ~40 remote offices using Cisco ASA 5505. The aim is to analyse usage data and find out exactly how the remote connections are being used. I followed through http://techowto.files.wordpress.com/2008/09/ntop-guide.pdf to set up ntop and https://supportforums.cisco.com/docs/DOC-6114 to set up the ASAs. I can see from the Plugin Netflow Statistics page that netflow packets from my ASAs are being received - the counter is increasing. However, I am not seeing any breakdown on the Global Traffic Statistic page after switching to the Netflow interface. I'm just seeing a pie chart showing 100% traffic for eth0. The interfaces and documentation are a little hard to follow so I am not sure I have got things configured correctly. When setting up my NetFlow-device.2 I can specify Virtual NetFlow Interface Network Address - the web UI says This value is in the form of a network address and mask on the network where the actual NetFlow probe is located. is this a Network address (e.g. 192.168.0.0/24) or an actual host IP address (192.167.0.1/24)? If that should be a network address, is this the network in which one of my ASAs is or the network in which my ntop server is? If a host IP address, is this the IP address used by eth0 on my ntop server, the IP address of an ASA, or something else? Do I need a separate virtual interface for each ASA I am collecting netflow data from? Any guidance would be greatly welcome.

    Read the article

  • Proxy Settings per Machine not working on windows server 2008 R2 SP1

    - by Anirudh Goel
    i have a very interesting problem and would appreciate any help for it. In my scenario i have scripts which bring up a VM inside a domain. Now i want to enable internet access for all the VM's and they go through a proxy. I interact with the VM's using remote sessions and use the credentials of a user which belogs to the domain administrator group. Now problem is that, i create VM's on the fly and destroy them as well,and the scripts i run during their lifetime require internet access on them.So i cannot statically set the proxy settings thus i used the option of Active Directory Group Policy Management. I initially used the "User Configuration" option and set the proxy, which worked like a charm when ever i log inside the machine. However it doesn't work if i use to remote login to the machine with an account which has not yet logged in to the machine. So i used this link to configure it to work on Per Machine, the group policy has worked fine and it reflects in the browser too. But i am not able to resolve any dns name like http://www.google.com or any internet based site. Any idea what i can do?

    Read the article

  • Error - "IR Hardware not detected" - but it's installed/working

    - by Robert
    I am trying to do: Settings-TV-Set up TV signal. During this process I am getting the error "IR Hardware not detected." With the remote, I can select the "try again" button (to re-detect) and it tries again, so the remote works. Plugging in the "IR blaster" doesn't change anything. (I wouldn't expect any difference, but I read a post which said you needed that. I will get Media Center to change channels if I can get that working - but first things first.) I was able to do the setup months ago when I had cable. and everything was fine. I just got DirecTV. (BTW - During the above process, Media Center detects the signal coming in on channel 3. Windows XP Media Center SP3. The TV Tuner card is a Pinnacle TCTV HD PCI. Everything - and I mean everything - has the latest firmware and drivers - as of 4 months ago when I fixed a different problem. So I DON"T WANT TO HEAR the standard answer to check drivers/firmware. THANK YOU.) Thanks for any help.

    Read the article

  • Why is OpenSSH not using the user specified in ssh_config?

    - by Jordan Evens
    I'm using OpenSSH from a Windows machine to connect to a Linux Mint 9 box. My Windows user name doesn't match the ssh target's user name, so I'm trying to specify the user to use for login using ssh_config. I know OpenSSH can see the ssh_config file since I'm specifying the identify file in it. The section specific to the host in ssh_config is: Host hostname HostName hostname IdentityFile ~/.ssh/id_dsa User username Compression yes If I do ssh username@hostname it works. Trying using ssh_config only gives: F:\>ssh -v hostname OpenSSH_5.6p1, OpenSSL 0.9.8o 01 Jun 2010 debug1: Connecting to hostname [XX.XX.XX.XX] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa-cert type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa type 2 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debia n-3ubuntu5 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /cygdrive/f/progs/OpenSSH/home/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa debug1: Offering DSA public key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I was under the impression that (as outlined in this question: How to make ssh log in as the right user?) specifying User username in ssh_config should work. Why isn't OpenSSH using the username specified in ssh_config?

    Read the article

  • OSX: sync Documents folder to Dropbox with version control

    - by James Porter
    I have ample storage in Dropbox to sync my entire OSX Documents folder, and I'd like to this just so that I have it anywhere I go. I found this question, which describes a method for doing this with symlinks. Seems good, the only problem is that it would be nice also to have everything under version control. I thought perhaps a better solution would be to set up my Documents folder as a git repo with a remote that I would push to in my Dropbox folder. Alternatively, just set up Documents as a git repo with no remote and then symlink it to Dropbox. Which of these two alternatives is preferable? What are some pitfalls I might not be thinking of with each? It also has occurred to me that some of the subdirectories of Documents are themselves git repos with github remotes. Would it cause problems for these subdirectories if I made Documents a git repo? If so, how do I get around this? Would making Documents an svn repo instead help? Is there a way to set up git so that this is not an issue?

    Read the article

  • Offline copies in Windows file sharing

    - by netvope
    I frequently access media files (music or video) on a remote Windows file share. My Internet connection is not very fast, and I find it a waste of bandwidth when I repeatedly access the same files. For example, I may listen to the same song 30 times in a month. So, I would like to cache files I've used. I know Windows has an "Always available offline" feature but I think it doesn't suit my needs. I don't want to make the whole share "available offline" as the remote Windows file share is huge (in terabytes). Making individual files "available offline" is tedious as the files are scattered in many different directories. It would be much more convenient if I can simply cache those I've used. Also The files on the share seldom change. Many of the files are rarely used. Some of the files are frequently used. I don't have a list of the most frequently used files. So I think the best way is to have a caching proxy for the Windows share. What do you think? I have a Linux box sitting around. Perhaps I should try to setup samba4?

    Read the article

  • Offline cache copies in Windows file sharing

    - by netvope
    I frequently access media files (music or video) on a remote Windows file share. My Internet connection is not very fast, and I find it a waste of bandwidth when I repeatedly access the same files. For example, I may listen to the same song 30 times in a month. So, I would like to cache files I've used. I know Windows has an "Always available offline" feature but I dont' think it suit my needs. I don't want to make the whole share "available offline" as the remote Windows file share is huge (in terabytes). Making individual files "available offline" is tedious as the files are scattered in many different directories. It would be much more convenient if the system can simply cache those I've used. I could also manually make a local copy each time I use a file... but this is even more troublesome than making each file "available offline" Also The files on the share seldom change. Many of the files are rarely used. Some of the files are frequently used. I don't have a list of the most frequently used files. It would be the best if I could tell Windows to cache the last accessed 10GB, but apparently it doesn't have this feature. So I think the best way is to have a SMB/CIFS caching proxy. What do you think? I have a Linux box sitting around. Perhaps I should try to setup samba4?

    Read the article

  • Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

    - by rodey
    EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why the ShrewSoft VPN client would connect but the Cisco connection won't. I'm not our network admin so sorry if I butcher some of the terminology. I have a computer at remote site that connects to our network through Cisco VPN. It uses the Cisco VPN software to do so. The problem is that the computer at this site cannot connect to our VPN because it is getting error "Reason 412: The remote peer is no longer responding." To see if perhaps something on their network was blocking the connection, I installed the ShrewSoft VPN client on the computer, imported our .pcf file and connected with no problem. I have tried two different versions of the Cisco VPN software (4.8.0.* and 5.0.03.*) and have the same problem. I installed Wireshark on the computer and have confirmed (while trying to connect through Cisco) that the computer is trying to contact the VPN server but is not receiving a response. We are not having any other problems regarding users not being able to connect. I'm at a loss at what else to check. I'll be monitoring this and have access to the computer at any time.

    Read the article

  • Windows XP can't connect to wireless network

    - by mikez302
    I have a desktop computer with a wireless card, running Windows XP SP3. For a little while, I had a remote network connection set up for my job, but I didn't need the remote connection so I deleted it. Now, I am unable to connect to the internet at all from that computer through my wireless router. I can connect through my router using my laptop, and I can connect through my neighbor's router using my desktop, but for some reason I can't connect through my own router using my desktop. I see the "Wireless Network Connection 5" icon in my system tray, but it tells me it is not connected. When I click on the icon, I see a list of wireless networks, including my own, which is set up to automatically connect, although it doesn't. When I try to connect to my network on my own (by clicking on it, then clicking "Connect"), it asks me for my network password like it usually does. I see a box come up saying "Waiting for network to be ready..." and it hangs there. On the list of wireless networks, my network says "Acquiring network address" but it doesn't actually connect. How can I fix this? I tried rebooting my computer, repairing my connection, and restarting my router, and I am still having this problem.

    Read the article

  • Cisco ASA Site-to-Site VPN Dropping

    - by ScottAdair
    I have three sites, Toronto (1.1.1.1), Mississauga (2.2.2.2) and San Francisco (3.3.3.3). All three sites have ASA 5520. All the sites are connected together with two site-to-site VPN links between each other location. My issue is that the tunnel between Toronto and San Francisco is very unstable, dropping every 40 min to 60 mins. The tunnel between Toronto and Mississauga (which is configured in the same manner) is fine with no drops. I also noticed that my pings with drop but the ASA thinks that the tunnel is still up and running. Here is the configuration of the tunnel. Toronto (1.1.1.1) crypto map Outside_map 1 match address Outside_cryptomap crypto map Outside_map 1 set peer 3.3.3.3 crypto map Outside_map 1 set ikev1 transform-set ESP-AES-256-MD5 ESP-AES-256-SHA crypto map Outside_map 1 set ikev2 ipsec-proposal AES256 group-policy GroupPolicy_3.3.3.3 internal group-policy GroupPolicy_3.3.3.3 attributes vpn-idle-timeout none vpn-tunnel-protocol ikev1 ikev2 tunnel-group 3.3.3.3 type ipsec-l2l tunnel-group 3.3.3.3 general-attributes default-group-policy GroupPolicy_3.3.3.3 tunnel-group 3.3.3.3 ipsec-attributes ikev1 pre-shared-key ***** isakmp keepalive disable ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** San Francisco (3.3.3.3) crypto map Outside_map0 2 match address Outside_cryptomap_1 crypto map Outside_map0 2 set peer 1.1.1.1 crypto map Outside_map0 2 set ikev1 transform-set ESP-AES-256-MD5 ESP-AES-256-SHA crypto map Outside_map0 2 set ikev2 ipsec-proposal AES256 group-policy GroupPolicy_1.1.1.1 internal group-policy GroupPolicy_1.1.1.1 attributes vpn-idle-timeout none vpn-tunnel-protocol ikev1 ikev2 tunnel-group 1.1.1.1 type ipsec-l2l tunnel-group 1.1.1.1 general-attributes default-group-policy GroupPolicy_1.1.1.1 tunnel-group 1.1.1.1 ipsec-attributes ikev1 pre-shared-key ***** isakmp keepalive disable ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** I'm at a loss. Any ideas?

    Read the article

  • How to use the correct SSH private key?

    - by Dail
    I have a private key inside /home/myuser/.ssh/privateKey I have a problem connecting to the ssh server, because i always get: Permission denied (publickey). I tried to debug the problem and i find that ssh is reading wrong file, take a look at the output: [damiano@Damiano-PC .ssh]$ ssh -v root@vps1 OpenSSH_5.8p2, OpenSSL 1.0.0g-fips 18 Jan 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for vps1 debug1: Applying options for * debug1: Connecting to 111.111.111.111 [111.111.111.111] port 2000. debug1: Connection established. debug1: identity file /home/damiano/.ssh/id_rsa type -1 debug1: identity file /home/damiano/.ssh/id_rsa-cert type -1 debug1: identity file /home/damiano/.ssh/id_dsa type -1 debug1: identity file /home/damiano/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 74:8f:87:fe:b8:25:85:02:d4:b6:5e:03:08:d0:9f:4e debug1: Host '[111.111.111.111]:2000' is known and matches the RSA host key. debug1: Found key in /home/damiano/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/damiano/.ssh/id_rsa debug1: Trying private key: /home/damiano/.ssh/id_dsa debug1: No more authentication methods to try. as you can see ssh is trying to read: /home/damiano/.ssh/id_rsa but i don't have this file, i named it differently. How could I tell to SSH to use the correct private key file? Thanks!

    Read the article

  • Multicast hostname lookups on OSX

    - by KARASZI István
    I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you!

    Read the article

  • Mercurial internal Setup on Windows 7 - Exception happened during processing of request from ...

    - by Sad0w1nL1ght
    Hy, i have 1 central repository and many locals. On my machine i have local and a central repository too. I can make clone/commit/update/push/pull very easy between the local and central repository on my local machine. but when i want to make a clone from another machine it gets an error. listening at http://MyLocalMachine:8000/ (bound to *:8000) ---------------------------------------- Exception happened during processing of request from ('192.168.0.194', 49319) Traceback (most recent call last): File "SocketServer.pyc", line 558, in process_request_thread File "SocketServer.pyc", line 320, in finish_request File "mercurial\hgweb\server.pyc", line 47, in __init__ File "SocketServer.pyc", line 615, in __init__ File "BaseHTTPServer.pyc", line 329, in handle File "BaseHTTPServer.pyc", line 323, in handle_one_request File "mercurial\hgweb\server.pyc", line 79, in do_GET File "mercurial\hgweb\server.pyc", line 70, in do_POST File "mercurial\hgweb\server.pyc", line 63, in do_write File "mercurial\hgweb\server.pyc", line 127, in do_hgweb File "mercurial\hgweb\hgweb_mod.pyc", line 86, in __call__ File "mercurial\hgweb\hgweb_mod.pyc", line 118, in run_wsgi ErrorResponse ---------------------------------------- The command line wich started the central repo: hg serve -R TT -n TTZoli The command from remote machine for cloning: hg clone --pull http://MyLocalMachine:8000/TT Config for the central repo: [ui] username = MyLocalUserName username = test <[email protected]> with this user i'm trying to acces the central repo [web] push_ssl = false Config for the remote repo: [ui] username = test <[email protected]> [web] push_ssl = false I'm not sure if it's relevant,my firewall is turned off on both machines, and the files in /hg folder are not versioned on the server, except hgignore. Could you please suggest some ideas? What could be the problem? Thanks in advance!

    Read the article

  • OpenWRT + OpenVPN client forwarding from lan to vpn not working

    - by Dariusz Górecki
    I've OpenWRT router with Backfire 10.03.1-rc3 (arch:brcm 2.6 kernel) I've set up an OpenVPN client connecting my router with workplace lan, and it works nicely, I can connect from router to networks (several) in workplace. My OpenVPN client uci-config looks like: config 'openvpn' 'stream_client' option 'nobind' '1' option 'float' '1' option 'client' '1' option 'reneg_sec' '0' option 'management' '127.0.0.1 31194' option 'explicit_exit_notify' '1' option 'verb' '3' option 'persist_tun' '1' option 'persist_key' '1' list 'remote' 'remote.address.cutted' option 'ca' '/lib/uci/upload/cbid.openvpn.stream_client.ca' option 'key' '/lib/uci/upload/cbid.openvpn.stream_client.key' option 'cert' '/lib/uci/upload/cbid.openvpn.stream_client.cert' option 'enable' '1' option 'dev' 'tun1' I've set the 'STREAM_VPN' Zone to allow in/out traffic, and I've added rules for zone-to-zone lan<-vpn and vpn<-lan config 'zone' option 'name' 'stream_vpn' option 'network' 'stream_vpn' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'forwarding' option 'src' 'lan' option 'dest' 'stream_vpn' config 'forwarding' option 'src' 'stream_vpn' option 'dest' 'lan' And interface config: config 'interface' 'stream_vpn' option 'proto' 'none' option 'ifname' 'tun1' option 'defaultroute' '0' option 'peerdns' '0' Now, from my router everything works nicely, the problem is that I cannot connect from computer inside a lan to hosts in networks provided by vpn connection :/ What I've missed, or what I'm doing wrong? And how can I force using specified DNS when connected to vpn? (I know that sever should use PUSH DNS option, but is PUSHes only routes)

    Read the article

  • LDAP, Active Directory and bears, oh my!

    - by Tim Post
    What I have: Workstations running Ubuntu Jaunty mounting /home on a remote NFS server. User accounts are still created locally on each individual workstation. Workstations running Windows XP / Vista NFS server (as noted above) Windows 2008 server All machines share a single private network (LAN). What I need to accomplish: A single, intuitive (GUI driven) place for an office administrator to create user accounts. This should let anyone login to their (linux or windows) workstation, then fire up remote desktop and use the same login to the Windows 2008 server, from any machine on the network. I have read so much on samba, LDAP vs AD, etc and now I'm even more confused than I was before I began researching the problem. Ideally, Linux and Windows users should be able to get to their local files once logged into the Win2008 server. I am a programmer, not an interoperability guru and I'm completely lost on where to even start trying to accomplish this, plus I've run out of things to Google. How would you do this? Is it even possible?

    Read the article

  • FTP not listing directory NcFTP PASV

    - by Jacob Talbot
    I am attempting to setup Multicraft on my server, all is running smoothly however the FTP won't allow anyone to connect from a remote FTP client, where net2ftp will work smoothly from a remote location. I have included the transcript from my FTP client, Transmit below to give you an idea of what's going on. I have disabled iptables as well, and still no luck either way. Transmit 4.1.7 (x86_64) Session Transcript [Version 10.8.2 (Build 12C54)] (21/10/12 11:23 PM) LibNcFTP 3.2.3 (July 23, 2009) compiled for UNIX 220: Multicraft 1.7.1 FTP server Connected to ateam.bn-mc.net. Cmd: USER jacob.9 331: Username ok, send password. Cmd: PASS xxxxxxxx 230: Login successful Cmd: TYPE A 200: Type set to: ASCII. Logged in to ateam.bn-mc.net as jacob.9. Cmd: SYST 215: UNIX Type: L8 Cmd: FEAT 211: Features supported: EPRT EPSV MDTM MLSD MLST type*;perm*;size*;modify*;unique*;unix.mode;unix.uid;unix.gid; REST STREAM SIZE TVFS UTF8 End FEAT. Cmd: OPTS UTF8 ON 200: OK Cmd: PWD 257: "/" is the current directory. Cmd: PASV Could not read reply from control connection -- timed out. (SReadline 1)

    Read the article

  • SSH works in putty but not terminal

    - by Ryan Naddy
    When I try to ssh this in a terminal: ssh [email protected] I get the following error: Connection closed by 69.163.227.82 When I use putty, I am able to connect to the server. Why is this happening, and how can I get this to work in a terminal? ssh -v [email protected] OpenSSH_6.0p1 (CentrifyDC build 5.1.0-472) (CentrifyDC build 5.1.0-472), OpenSSL 0.9.8w 23 Apr 2012 debug1: Reading configuration data /etc/centrifydc/ssh/ssh_config debug1: /etc/centrifydc/ssh/ssh_config line 52: Applying options for * debug1: Connecting to sub.domain.com [69.163.227.82] port 22. debug1: Connection established. debug1: identity file /home/ryannaddy/.ssh/id_rsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_rsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_dsa-cert type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa type -1 debug1: identity file /home/ryannaddy/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.0 debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: Miscellaneous failure Cannot resolve network address for KDC in requested realm debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP Connection closed by 69.163.227.82

    Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >