Search Results

Search found 6591 results on 264 pages for 'rules engines'.

Page 213/264 | < Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >

  • iptables : how to allow incoming ftp traffic?

    - by logansama
    Hi, Still fighting my way through the jungle that is called iptables. I have managed to allow FTP access outside of our LAN: both these would work. NOTE: eth0 is the LAN interface and eth1 is the WAN interface. iptables -t filter -A FORWARD -i eth0 -p tcp --dport 20:21 -j ACCEPT or iptables -A FORWARD -i eth0 -o eth1 -p tcp --sport 20:21 --dport 1024:65535 -j ACCEPT But when i connect to a external FTP server i manage to log in and all is fine until it wishes to List the directory content. Then nothing happens as the data is blocked, due to the fact that i do not have a rule set up to allow it! (my last rule on the FORWARD chain is to block all traffic) I have tried a gazillion rules (many of which i did not understand) to try and allow the FTP traffic back through my server. One such rule for example was: iptables -A FORWARD -i eth1 -o eth0 -p tcp --sport 20:21 --dport 1024:65535 -j ACCEPT But i cannot get the List to work. It just times out after a while. Would anyone perhaps know how to build a rule which would allow FTP to List / allow such traffic back? Or have a link to sources i could work through? Thank you,

    Read the article

  • Have servers behind OpenVPN subnet reach connecting clients

    - by imaginative
    I am trying to find some relevant documentation or what directives I need in either the OpenVPN server configuration or client configuration to accommodate for this use case. I have an OpenVPN server that clients connect to. The OpenVPN server can communicate directly with any of the clients already, this is not an issue. The client is able to reach any machine on the private subnet where OpenVPN resides, this is also not an issue. My issue is that the reverse is currently not possible - I have servers on the same subnet as the OpenVPN box that cannot reach any of the connecting clients. I'd like to be able to SSH to them and more, the same way the client can reach the servers behind the OpenVPN subnet. What do I need to do to make this possible? I already have masquerading rules set on the OpenVPN box: iptables -t nat -A POSTROUTING -s 192.168.50.0/24 -o eth0 -j MASQUERADE IP Forwarding is enabled: echo 1 >/proc/sys/net/ipv4/ip_forward I added a route on the server behind the private subnet to be aware of the route: 192.168.50.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 What am I missing?

    Read the article

  • Windows 2008 Server can't connect to FTP

    - by stivlo
    I have Windows 2008 Server R2, and I am trying to install FTP services. My problem is I can't connect from outside, FileZilla complains with: Error: Connection timed out Error: Could not connect to server Here is what I did. With the Server Manager, I've installed the Roles FTP Server, FTP Service and FTP Extensibility. In Internet Information Services version 7.5, I've chosen Add FTP Site, enabled Basic Authentication, Allow a user to connect Read and Write. In FTP Firewall support on the main server, just after start page, I've set Data Channel Port Range to 49100-49250 and set the external IP Address as the one I see from outside. If I click on FTP IPv4 Address and Domain Restrictions, and click on Edit Feature Settings, I see that access for unspecified clients is set to Allow, so I click OK without changing those defaults. In FTP SSL Policy, I've set to Require SSL connection, certificate is self signed. I tried to connect with FileZilla from the same host and it works, however it doesn't work remotely, as I said above. I've enabled pfirewall.log, but apparently nothing gets logged. The server is in Amazon EC2, and on the security group inbound firewall rules, I've set that ports 21 and ports 49100-49250 accepts connections from everywhere. What else should I be checking to solve the problem?

    Read the article

  • Basic IPTables setup for OpenVPN/HTTP/HTTPS server

    - by Afronautica
    I'm trying to get a basic IPTables setup on my server which will allow HTTP/SSH access, as well as enable the use of the server as an OpenVPN tunnel. The following is my current rule setup - the problem is OpenVPN queries (port 1194) seemed to be getting dropped as a result of this ruleset. Pinging a website while logged into the VPN results in teh response: Request timeout for icmp_seq 1 92 bytes from 10.8.0.1: Destination Port Unreachable When I clear the IPTable rules pinging from the VPN works fine. Any ideas? iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A FORWARD -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT

    Read the article

  • fail2ban iptable rule wont block

    - by Termiux
    So I set up fail2ban on my Debian 7 server, still I've been getting hit a lot and I dont know why is not blocking properly. The regex works, it recognizes the attempts but it seems the iptables rules it insert wont work, this is how it look iptables ouput looks after fail2ban tries to block. Chain INPUT (policy ACCEPT) num target prot opt source destination 1 fail2ban-courierauth tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 2 fail2ban-couriersmtp tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 3 sshguard all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT) num target prot opt source destination Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain fail2ban-courierauth (1 references) num target prot opt source destination 1 DROP all -- 216.x.y.z 0.0.0.0/0 2 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-courierimap (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-courierpop3 (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-couriersmtp (1 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-postfix (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-sasl (0 references) num target prot opt source destination 1 RETURN all -- 0.0.0.0/0 0.0.0.0/0 In the iptables above you can see the "Chain fail2ban-courierauth" rule that added the drop rule for the ip but Im still able to connect!! I can still connect to the server, why isn't it blocking?

    Read the article

  • Accessing a webpage folder with .htaccess in it via apache webdav?

    - by pingo
    I have setup webdav access in order to enable an external user to upload the content of his web page to his folder on my server that is served by apache to the web. This way he could update his web page via webdav. Now the problem is that the user requires a .htaccess file and of course .htaccess breaks webdav probably because it overrides settings. (new files cannot be uploaded anymore via webdav if below specified .htaccess exists) I am running Apache2.2.17 and this is my webdav config: Alias /folderDAV "d:/wamp/www/somewebsite/" <Location /folderDAV> Order Allow,Deny Allow from all Dav On AuthType Digest AuthName DAV-upload AuthUserFile "D:/wamp/passtore/user.passwd" AuthDigestProvider file require valid-user </Location> This config is part of my naive solution to fixing this problem. The idea was to specify an alias to the web page folder where webdav would be enabled and then set AllowOverride to none so that the .htaccess would have no effect. Of course I then found out that in <Location /> AllowOverride directive is not valid. The .htaccess file looks like this: #opencart settings Options +FollowSymlinks Options -Indexes <FilesMatch "\.(tpl|ini)"> Order deny,allow Deny from all </FilesMatch> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)\?*$ index.php?_route_=$1 [L,QSA] ErrorDocument 403 /403.html deny from 1.1.1.1/19 allow from 2.2.2.2 What would be the solution here? I would like to have the web page accessible from the web but at the same time be able to access and modify it via apache's webdav (with digest auth). How would I do that? Also if possible I would like a solution that permits the existence of the .htaccess so that the user still has the power to setup access rules for his web page.

    Read the article

  • What to do with old laptop screens?

    - by Lord Torgamus
    This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

    Read the article

  • IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

    - by NVRAM
    I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

    Read the article

  • Creating a test database with copied data *and* its own data

    - by Jordan Reiter
    I'd like to create a test database that each day is refreshed with data from the production database. BUT, I'd like to be able to create records in the test database and retain them rather than having them be overwritten. I'm wondering if there is a simple straightforward way to do this. Both databases run on the same server, so apparently that rules out replication? For clarification, here is what I would like to happen: Test database is created with production data I create some test records that I want to keep running on the test server (basically so I can have example records that I can play with) Next day, the database is completely refreshed, but the records I created that day are retained. Records that were untouched that day are replaced with records from the production database. The complication is if a record in the production database is deleted, I want it to be deleted on the test database too, so I do want to get rid of records in the test database that no longer exist in the production database, unless those records were created within the test database. Seems like the only way to do this would be to have some sort of table storing metadata about the records being created? So for example, something like this: CREATE TABLE MetaDataRecords ( id integer not null primary key auto_increment, tablename varchar(100), action char(1), pk varchar(100) ); DELETE FROM testdb.users WHERE NOT EXISTS (SELECT * from proddb.users WHERE proddb.users.id=testdb.users.id) AND NOT EXISTS (SELECT * from testdb.MetaDataRecords WHERE testdb.MetaDataRecords.pk=testdb.users.pk AND testdb.MetaDataRecords.action='C' AND testdb.MetaDataRecords.tablename='users' );

    Read the article

  • Libvirt/KVM in NAT: can't access from host (and can't forward)

    - by SharkWipf
    I'm trying to set up a port forward to a KVM guest, managed through Libvirt on Debian 6. The VM is running in NAT, through the "default" network. This all runs fine, the VM has full internet connection. However, the host cannot reach the vm internally. Neither ping, nc nor nmap on the NAT network give any signs of the VM. Due to this, the normal iptables forwarding rules don't work either. $ cat /etc/debian_version 6.0.5 $ libvirtd --version libvirtd (libvirt) 0.9.11.3 $ kvm --version QEMU emulator version 1.0 (qemu-kvm-1.0+dfsg-11, Debian), Copyright (c) 2003-2008 Fabrice Bellard ifconfig: eth0 Link encap:Ethernet HWaddr 54:04:a6:f1:6f:10 inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.x inet6 addr: fe80::5604:a6ff:fef1:6f10/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118902 errors:0 dropped:0 overruns:0 frame:0 TX packets:142357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13247173 (12.6 MiB) TX bytes:95163190 (90.7 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:230646 errors:0 dropped:0 overruns:0 frame:0 TX packets:230646 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204577107 (195.0 MiB) TX bytes:204577107 (195.0 MiB) virbr0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:666759 (651.1 KiB) TX bytes:400701 (391.3 KiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet6 addr: fe80::fc54:ff:fee2:d260/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:125687 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:739803 (722.4 KiB) TX bytes:6886609 (6.5 MiB)

    Read the article

  • RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

    - by Kronick
    On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

    Read the article

  • Coloring of collapsed threads in mutt

    - by Rich
    I'm trying to figure out the syntax of colouring collapsed threads in the mutt index. The documentation for mutt patterns doesn't seem to include a description of how this works, and so far I've been completely unable to figure it out by trial and error. What I'd like is for collapsed threads that contain any unread (new) messages to be always coloured green. If collapsed threads with no unread messages contain any flagged messages, then I'd like them to be red. So far, every set of patterns I've tried results in threads that contain both flagged and unread messages being coloured red (I want them green). These work: color index green default "~N" # unread messages color index green default "~N~F" # unread flagged messages color index red default "~F" # flagged messages color index green default "~v~(~N)" # collapsed thread with unread But these don't: color index green default "~v~(~N~F)" # attempt to keep threads with unread green color index red default "~v~(~F)" # colours collapsed threads with flagged and unread red color index red default "~v~(!~N~F)" # ditto color index red default "~v~(^!~N~F)" # ditto color index red default "~v~(~F)~(!~N)" # ditto color index red default "~v~(~F)~v~(!~N)" # ditto I've also tried switching the order of the "~v~(~F)" and "~v~(~N)" commands in the file, but the "flagged" rule always seems to take precedence over the "new" rule. Ideally I'd like to understand how the syntax for colouring collapsed threads works, but at this point I'd happily settle for a set of rules that achieves the colourscheme described above.

    Read the article

  • Notify user of message arrival in another mailbox

    - by Tim Alexander
    This is very similar to this question but has a few differences. Basically we have a user dealing with a conflict of interest case. To separate the mail from prying eyes (and the draconian routing system we have in place) the user has been granted access to a second conflicts mailbox that is only accessible to him via OWA. This has worked fine for years but now the user would like a notification to be sent to him when a message arrives in his conflicts mailbox. Initially I thought an Outlook rule would work but of course the client is never logged in so the Outlook rules are never processed. This led me to think that an Exchange Transport rule might work but the only options I can see are to Forward or Copy the message to another user. this would bypass the conflicts setup. All I really need is a notification and not the actual message to be sent. Is this at all possible with Exchange 2007? Or if not is there any thirdparty addition or workaround that anyone has come across?

    Read the article

  • Apache: getting proxy, rewrite, and SSL to play nice

    - by Rich M
    Hi, I'm having loads of trouble trying to integrate proxy, rewrite, and SSL altogether in Apache 2. A brief history, my application runs on port 8080 and before adding SSL, I used proxy to strip the 8080 from the url's to and from the server. So instead of www.example.com:8080/myapp, the client app accessed everything via www.example.com/myapp Here was the conf the accomplished this: ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> ProxyPass /myapp http://www.example.com:8080/myapp ProxyPassReverse /myapp http://www.example.com:8080/myapp What I'm trying to do now is force all requests to myapp to be HTTPS, and then have those SSL requests follow the same proxy rules that strip out the port number as my application used to. Simply changing the ports 8080 to 8443 in the ProxyPass lines does not accomplish this. Unfortunately I'm not an expert in Apache, and my skills of trial and error are already reaching the end of the line. RewriteEngine On RewriteCond %{HTTPS} off RewriteRule myapp/* https://%{HTTP_HOST}%{REQUEST_URI} ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> SSLProxyEngine on ProxyPass /myapp https://www.example.com:8443/mloyalty ProxyPassReverse /myapp https://www.example.com:8433/mloyalty As this stands, a request to anything on the server other than /myapp load fine with http. If I make a browser http request to /mypp it then redirects to https:// www.example.com:8443/myapp , which is not the desired behavior. Links within the application then resolve to https:// www.example.com/myapp/linkedPage , which is desirable. Browser requests (http and https) to anything one level beyond just /myapp ie. /myapp/mycontext resolve to https:// www.example.com/myapp/mycontext without the port. I'm not sure what other information there is for me to give, but I think my goals should be clear.

    Read the article

  • iptables rule on INPUT between 2 ethernet cards on the same host

    - by user1495181
    I have 2 eth cards on the same host. Both connected directly with LAN cable. I set eth0 with ip - 192.168.1.2 I set eth1 with ip - 192.168.1.1 I set this rule: iptables -A INPUT -p tcp -j NFQUEUE --queue-num 0 There are no other rules. (I ran iptables -X,-F) I send TCP syn packet ( with c++ program by using raw socket) from 192.168.1.2 to 192.168.1.1 In wireshark i see that the packet received on eth0, but the iptables rule (above) dosnt apply for this packet. when i sent the packet to remote host and apply this rule on the remote host than it work correct. So, i guess that this is due to the fact that both eth cards exists the same host. . I need to create iptables INPUT rule for local eth card (dest and src on the same machine ). I need it for simplify test. Did i guess the problem correct? is there a way to bypass this? Ps - connected them via switch didn't help. the rule wasn't applied. Run on Ubuntu. TCDUMP show the packet: 10:48:42.365002 IP 192.168.1.2.38550 > 192.168.1.1.34298: Flags [S], seq 0, win 5840, length 0 but logging of iptables like this, has nothing: iptables -A INPUT -p tcp -j LOG --log-prefix '*****************' iptables -A OUTPUT -p tcp -j LOG --log-prefix '#################'

    Read the article

  • Why are SIP calls via my server silent?

    - by Archcode
    I have FreeSWITCH SIP server up and running. It has public IP and sits behind 1-to-1 NAT (it's Amazon EC2 instance actually). I can connect to it, make a call to other endpoint (namely, my android device to my pc and vice versa) and signals are send with no problems (call, answer, hangup, etc). Unfortunately, and what drives me crazy, that's all: no audio gets through, no video either. Server does not throw errors, it reports many retransmission though, looks like this: switch_rtp.c:915 [ zrtp engine]: WARNING! HELLO Max retransmissions count reached (20 retries). ID=15 Codecs are set up correctly (same config worked locally on my LAN). NAT/firewall on client side may be a problem, signals do get through (perhaps due to fixed port, data streaming runs on random one, that is currently my best bet). STUN/TURN/ICE setting on client seem to have no effect. Endpoints sit behind symmetric NAT. On server there are no iptables rules, security group is set as suggested there: http://wiki.freeswitch.org/wiki/Firewall Help, please. How to make it work or at least diagnose what's wrong?

    Read the article

  • nginx codeigniter rewrite: Controller name conflicts with directory

    - by palerdot
    I'm trying out nginx and porting my existing apache configuration to nginx. I have managed to reroute the codeigniter url's successfully, but I'm having a problem with one particular controller whose name coincides with a directory in site root. I managed to make my codeigniter url's work as it did in Apache except that, I have a particular url say http://localhost/hello which coincides with a hello directory in site root. Apache had no problem with this. But nginx routes to this directory instead of the controller. My reroute structure is as follows http://host_name/incoming_url => http://host_name/index.php/incoming_url All the codeigniter files are in site root. My nginx configuration (relevant parts) location / { # First attempt to serve request as file, then # as directory, then fall back to index.html index index.php index.html index.htm; try_files $uri $uri/ /index.php/$request_uri; #apache rewrite rule conversion if (!-e $request_filename){ rewrite ^(.*)/?$ /index.php?/$1 last; } # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location ~ \.php.*$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } I'm new to nginx and I need help in figuring out this directory conflict with the Controller name. I figured this configuration from various sources in the web, and any better way of writing my configuration is greatly appreciated.

    Read the article

  • IP Masquerade and forwarding

    - by poelinca
    Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

    Read the article

  • Router intermittently failing

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

    Read the article

  • Elevating UAC via .bat file?

    - by jslaker
    Pretty straightforward one that I'm having trouble finding an answer to. serverfault previously helped me with finding a way to automate Windows updates without using WSUS. It's working fantastically, but to run it over the network, you have to first mount a shared drive. That's pretty simple XP since you just mount the drive and run the updater. On Vista and W7, though, this all has to be done with elevated privileges to work correctly. The UAC account can't see network drives mounted by the regular user, so in order to get everything working, I have to mount the share via net use from an escalated shell. I'd like to automate mounting this share and launching the updater via a simple .bat file. I could probably just instruct everybody to right click "Run as Administrator" on the .bat file, but I'd like to keep things as simple as possible and have the .bat automatically prompt the user to escalate their privileges. Since these computers don't belong to us, I can't count on anything like Powershell being installed, so that rules any solution along those lines out and pretty much have to rely on things that would be included in an RTM Vista install. I'm hoping I'm mostly missing something obvious here. :)

    Read the article

  • iptables logging not working?

    - by vps_newcomer
    OS: Ubuntu 10.04 Logging daemon: rsyslog For some reason i'm not getting any iptables logs, even thought i don't look through them very often i'd still like to get it working for the sake of it working XD Here is my /etc/ryslog.d/iptables.conf :msg, contains, "[IPTABLES]" -/var/log/iptables.log & ~ My iptables logging prefix is "[IPTABLES]" followed by whatever else (example [IPTABLES] Denied xyz) the /var/log/iptables.log file is being created, however its not getting any entries. I can see the logging entries in dmesg but not in syslog or messages. Whats going on? EDIT: My iptables logging rules: # logging limit LoggingLimit=5/min LoggingPrefix=IPTABLES # Logging chain iptables -N LOG_REJECT iptables -A LOG_REJECT -j LOG # join INPUT to LOG_REJECT iptables -A INPUT -j LOG_REJECT # logging iptables -A LOG_REJECT -p tcp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied TCP: " #--log-level 7 iptables -A LOG_REJECT -p udp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied UDP: " #--log-level 7 iptables -A LOG_REJECT -p icmp -m limit --limit $LoggingLimit -j LOG --log-prefix "$LoggingPrefix Denied ICMP: " #--log-level 7 Update: I found a thread that has the same symptoms as i do, apparently is a kernel bug. I am using a VPS so could anyone point me on how to upgrade my kernel or apply a workaround? I couldn't find a 2.6.34 kernel listed in apt-cache. Thread: http://www.linode.com/forums/viewtopic.php?t=5533

    Read the article

  • Linux iptables / conntrack performance issue

    - by tim
    I have a test-setup in the lab with 4 machines: 2 old P4 machines (t1, t2) 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t3) Intel e1000 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t4) Intel e1000 to test linux firewall performance since we got bitten by a number of syn-flood attacks in the last months. All machines run Ubuntu 12.04 64bit. t1, t2, t3 are interconnected through an 1GB/s switch, t4 is connected to t3 via an extra interface. So t3 simulates the firewall, t4 is the target, t1,t2 play the attackers generating a packetstorm thorugh (192.168.4.199 is t4): hping3 -I eth1 --rand-source --syn --flood 192.168.4.199 -p 80 t4 drops all incoming packets to avoid confusion with gateways, performance issues of t4 etc. I watch the packet stats in iptraf. I have configured the firewall (t3) as follows: stock 3.2.0-31-generic #50-Ubuntu SMP kernel rhash_entries=33554432 as kernel parameter sysctl as follows: net.ipv4.ip_forward = 1 net.ipv4.route.gc_elasticity = 2 net.ipv4.route.gc_timeout = 1 net.ipv4.route.gc_interval = 5 net.ipv4.route.gc_min_interval_ms = 500 net.ipv4.route.gc_thresh = 2000000 net.ipv4.route.max_size = 20000000 (I have tweaked a lot to keep t3 running when t1+t2 are sending as many packets as possible). The result of this efforts are somewhat odd: t1+t2 manage to send each about 200k packets/s. t4 in the best case sees aroung 200k in total so half of the packets are lost. t3 is nearly unusable on console though packets are flowing through it (high numbers of soft-irqs) the route cache garbage collector is no way near to being predictable and in the default setting overwhelmed by very few packets/s (<50k packets/s) activating stateful iptables rules makes the packet rate arriving on t4 drop to around 100k packets/s, efectively losing more than 75% of the packets And this - here is my main concern - with two old P4 machines sending as many packets as they can - which means nearly everyone on the net should be capable of this. So here goes my question: Did I overlook some importand point in the config or in my test setup? Are there any alternatives for building firewall system especially on smp systems?

    Read the article

  • Wordpress on Apache is redirecting all https to http

    - by Krist van Besien
    I have a problem with a wordpress site on a server I admin. I don't know anything about wordpress however. My problem is that we want the site to be accessed over https, bot somehow all requests to https:// URLs are answered by the server with a 302, redirecting to http. The wordpress site itself is configured to use https, and we see that in the pages that are generated the links are all https links. In the apache config there are no rewrite rules and no redirects. However, any request to a https:// URL is answered with a redirect to the equivalent http URL. And I really would like to know where these redirects are coming from, what is generating these redirects. I've increased the loglevel on the webserver to DEBUG, but did not get any info there. I tried to enable debug logging in wordpress per the recipy I found here: http://codex.wordpress.org/Debugging_in_WordPress But did not get a debug.log file in the directory where one should appear. I'm really at a loss here, and need to fix this urgently. Any hints as where to start looking? Apache is 2.2.14 on Ubuntu. There are several other virtual hosts on this server, using php and https without any problem... Edit: I created a small info.php script and dropped that in the webservers' root. Calling this yields the output of the script, no redirect is generated. This suggest that it's not the webserver, but wordpress that is doing it. A second thing I noticed is that the redirect comes with several cookies, one of which has "httponly" set. Could that be it?

    Read the article

  • Revamping an old and unstable office IT-solution using Windows Server and OpenVPN

    - by cmbrnt
    I've been given the cumbersome task to totally redo the IT-infrastructure for a customer's office. They are currently running Windows XP all over, with one computer acting as a file server with no control over which users have access to which files, and so on. To top it off, this file server also functions as a workstation, which means it gets rebooted every time the user notices some sluggish behavior or experiences problems with flash games. To say the least, this isn't working for them. Now - I've got a very slim budget, but I need to set up a new server, and I wish to run Windows Server 2008 on it. I also need the ability to access the network remotely via VPN. Would it be a good idea to install VMware ESXi 4.1 onto the new server, and then run Windows Server 2008 as well as a separate Debian install for openvpn on it? I don't like the Domain Controller for the future AD to also run a VPN-server, because of stability issues when something goes to hell with either of them. There will be no redundancy though. However, I'm not sure if there is something to gain by installing a VPN solution on the Windows Server itself, when it comes to accessing file shares on the network via VPN. I don't know how to enable users logging in via the VPN to access the remote files, since they will be accessing the network from their own home computers (which is indeed a really bad idea, but this is what I've got to work with). They won't be logged in to the windows Domain, but rather their home workgroups. I need to be able to grant access to files in certain directories based on the logged in AD-user, but every computer won't necessarily be configured to log into the domain. I'm not sure how to explain this in a good way, but I'd be happy to clarify if somethings not clear. Any help would be great, because I've got a feeling that I can't do this without introducing a bunch of costly new rules when it comes to their IT-solution. I'd rather leave that untouched and go on my merry way to the next assignment.

    Read the article

  • Allow outgoing connections for DNS

    - by Jimmy
    I'm new to IPtables, but I am trying to setup a secure server to host a website and allow SSH. This is what I have so far: #!/bin/sh i=/sbin/iptables # Flush all rules $i -F $i -X # Setup default filter policy $i -P INPUT DROP $i -P OUTPUT DROP $i -P FORWARD DROP # Respond to ping requests $i -A INPUT -p icmp --icmp-type any -j ACCEPT # Force SYN checks $i -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Drop all fragments $i -A INPUT -f -j DROP # Drop XMAS packets $i -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Drop NULL packets $i -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Stateful inspection $i -A INPUT -m state --state NEW -p tcp --dport 22 -j ACCEPT # Allow established connections $i -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow unlimited traffic on loopback $i -A INPUT -i lo -j ACCEPT $i -A OUTPUT -o lo -j ACCEPT # Open nginx $i -A INPUT -p tcp --dport 443 -j ACCEPT $i -A INPUT -p tcp --dport 80 -j ACCEPT # Open SSH $i -A INPUT -p tcp --dport 22 -j ACCEPT However I've locked down my outgoing connections and it means I can't resolve any DNS. How do I allow that? Also, any other feedback is appreciated. James

    Read the article

< Previous Page | 209 210 211 212 213 214 215 216 217 218 219 220  | Next Page >