Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 214/444 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

  • Share USB devices between 32 bit and 64 bit systems

    - by Sreejith S
    The latest version of USBDeviceShare, the USB over IP software, supports sharing USB devices between 32 bit and 64 bit editions of Windows. A USB device plugged in to a 64 bit PC running 64 bit version of Windows can be shared and remotely accessed from a 32 bit PC and vice versa. Download USBDeviceShare USB over Network software from http://www.sysnucleus.com/usbshare/usbshare_download.html Keywords : USB over Ethernet, USB Server, Remote USB Access, Share USB

    Read the article

  • Operation times out trying to SSH outside LAN i.e. from internet to LAN no connection is established

    - by Pelle L
    I run Ubuntu 12.04 and have no success connecting with SSH from "Internet". The router is a TL-MR3420 which is set up to forward requests to one of the NIC's on ubuntu machine (which has in total 3 NICs). I can SSH from a client on the "local" network/LAN. The forward mechanism in the router seems to work. If I stop SSH service on the Ubuntu machine and instead start one on the windows machine - it works like a charm. I do not use the Std port 22 but that shouldn't be an issue as far as I understand - sine it works on the same port on the win machine. Since my public IS isn't static I use a dynDNS service but as said earlier the same setup works from the win machine. The router is located on 192.168.0.1 The Ubuntu NICs has the following IP: eth2 192.168.0.100 , eth1 192.168.0.101 , eth0 192.168.0.102 and I have forwarded the "outside" request to 192.168.0.100 In regards for firewall settings on the Ubuntu machine I have disabled the ufw and the command ufw status give status: inactive. I don't now it this is relevant information but teh command iptables --list give: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have tried to catch traffic with help of wireshark (a tool I'm not too used to use) and it seems as a few (3?) "requests" actually reaches the NIC but ... nothing happens. The syslog does not show any entries during these attempts. Perhaps it could be some routing issues but I have reached my level of competence and are stuck ... all help and support to get this sorted out is much appreciated. I'm new to Linux so please do not assume I have a configuration that is correct - but as I wrote earlier - if the client that initiate SSH is on the LAN it all works. PS:I have also tried to get VPN (PPP) working from Internet with no success - once again VPN works on the windows machine ... so my best guess is that this is related to how the ubuntu machine handles (IP) traffic and not the TL-MR3420 router or other network issues.

    Read the article

  • alias/function with command line arguments

    - by Agzam
    I'm tired of typing manage.py startserver 10.211.55.4:4000, so decided to make an alias for that. Only thing is: the port sometime changes. So I did this in bash profile: function runserver() { python manage.py runserver 10.211.55.4:$1 } But then when I call it: runserver 3000, it starts it, but immediately stops saying: "Error: That IP address can't be assigned-to". However if I type the same thing right into command line it works with no complains.

    Read the article

  • Ubuntu 12.04 - PPTP VPN is the only Internet Access

    - by user212553
    I know this has been covered. I've read dozens of posts but still have questions. I have a work server whose traffic should never leave my house without encryption. The VPN is PPTP. Currently I have a cron job that checks the status of the ppp0 adapter each minute. If the connection drops, which it does fairly often, it shuts key components down. It's fairly easy to restart PPTP with "nmcli con up id 'myVPNServer'" but there's no assurance it will reconnect and I need a better way to stop traffic (other than killing apps) when ppp0 is down. The two options I've seen discussed are the firewall (UFW, Firestarter, IPTables) or the route tables. I could be easily swayed to consider the firewall option but I focused on the route tables since no new function needs to be started. My questions involve the way the route tables change and then specifics on rules. When I start the PPTP VPN the route tables change. That suggests that if the VPN drops, the table will change back, defeating my stated intent of preventing external traffic. How can I make "sticky" changes to the route table that will persist even if the VPN connection drops? Perhaps the check boxes "Ignore automatically obtained routes" or "Use this connection only for resources on it's network" (which are part of the VPN configuration options)? It would seem that, if I can force the active VPN route table to stay in effect, even when the VPN drops, that this will effectively kill any external traffic should the VPN drop. This will give me the latitude to run a routine to restart the VPN from the command line (assuming the route table rules don't prevent me re-establishing the connection). My route table, with the VPN active is (ip route list): Any comments on what 10.10.1.1 is? $ ip route list default dev ppp0 proto static 10.10.1.1 dev ppp0 proto kernel scope link src 10.10.1.11 VPN_Server_IP_Address via 192.168.1.1 dev eth0 proto static VPN_Server_IP_Address via 192.168.1.1 dev eth0 src 192.168.1.60 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.60 metric 1

    Read the article

  • How to suspend a user from coming back on my website and register again? any ideas? [closed]

    - by ahmed amro
    i am an outsourcing person not a programmer and i am working on shopping website like ebay , so my question might be beginner for everyone.my website will need a user suspension in case he violates the terms and conditions. here is some thoughts on my mind: -IP address tracking -User information ( email address or any information are going to be repeated on second time of registration after suspension) -session Id cookies are also a way to identify the users after log in any more creative suggested ideas to avoid fraud and scammers, it it possible to make 100% impossible to avoid those bad users from coming back ?

    Read the article

  • My VPS was wiped, can I still access it?

    - by Lucas806
    Someone gained access into my Ubuntu VPS via SSH, they entered rm -Rf / which wiped it and now I can't access it via SSH or SFTP. On SFTP I get the the following error: Error: Connection timed out Error: Could not connect to server And then on SSH, I try to connect to my VPS IP on Port 22, it doesn't come up with anything for ages (it should come up asking for a username) and then a op-up appears saying: Network Error: Connection timed out. Is it possible to fix this, if so, how?

    Read the article

  • Tablet PC : HP dévoile encore un peu plus son Slate pour tenter de détourner l'attention de l'iPad,

    Mise à jour du 06/04/10 TabletPC : HP dévoile encore un peu plus son Slate Pour tenter de détourner l'attention de l'iPad, en vain Alors que le lancement de l'iPad semble se révéler globalement positif, HP tente (désespérément) de détourner l'attention des observateurs pour que ceux-ci n'oublient pas qu'une autre tablette existe : le Slate. Ou plus exactement existera puisque le Slate n'est encore qu'un prototype. Dans une vidéo qui sort donc la même semaine que l'iP...

    Read the article

  • juju bootstrap error no default environment found

    - by Khun Aung
    Everytime i type juju bootstrap .Error no default environment found keeps showing up. i was trying to configure maas. Please help me. I'm new! this is my envronments.yaml juju: environments environments: maas: type: maas maas-server: 'http://{my ip address}:80/MAAS' maas-oauth: 'c2cg7hTpzFuRmJjrBC:YH2ZEXVRKL46ttaDmq:beKeBjhYgWyxKk2gqqwaCx97xnmp4LJu' admin-secret: 'nothing' default-series: 'precise'

    Read the article

  • 139 updates wont update

    - by amnesia
    I cant seem to update the 139 files I need too. It is saying I am not connected to the internet yet I am typing this to you on the same computer?? I have deleted most of the errors as it shows the same IP all the time and I am not sure if that is mine or not ANy ideas would be greatly appreciated Failed to fetch http://au.archive.ubuntu.com/ubuntu/pool/main/i/icedtea-web/icedtea-netx-common_1.2-2ubuntu1.2_all.deb 404 Not Found

    Read the article

  • Forwarding naked domain to www [duplicate]

    - by mravec
    This question already has an answer here: Why is www. working but no-www is not? 1 answer I successfully mapped my www.mydomain.com to my Google site (as described here). However I would like to forward also my naked domain (mydomain.com) to end up in www.mydomain.com. I assume I should modify 'A' DNS record in my provider but what IP should I point it to?

    Read the article

  • Redirect subdomain to local pc

    - by user1188570
    I have a home webserver which is constatly running. Is it possible to create a subdomain which would redirect traffic to another local pc? For example I have 1 Server and one notebook(with webserver installed for developing) Now I can access to notebook only from local network with IP. Server is also hosting domain example.com. Now I would like to visit laptop.example.com, which would be my laptop.

    Read the article

  • remote control android, a reverse ssh tunnel

    <b>Handle With Linux:</b> "Reasons for using a reverse shell include: you can bypass firewalls, you can connect to your phone without knowing the ip, the connection is initiated from the phone so you don't need to have a ssh server listening on your phone. Just think of all the fun this makes possible!"

    Read the article

  • Why is user "lightdm" trying to log into my SBS 2003?

    - by user652740
    I have 7 Ubuntu desktops connected to a SBS 2003 using Centrify. I have a rather weird scenario, whereby a user with the name lightdm is trying to log into our server, possibly automatically. I thought lightdm was the session manager, not a user? Does anybody know what could be causing this? There is no user: "lightdm" on the server and the problem only comes from one of the 7 internal desktops connected to the server (its IP address is in the local network).

    Read the article

  • Fonality: Goodbye Open Source, Hello Cloud

    <b>The VAR Guy:</b> "The company previously positioned itself as an open source IP PBX phone system provider. But going forward, Fonality is pitching itself as a leading provider of cloud-based phone systems and unified communications for small business."

    Read the article

  • My Ubuntu VPS was wiped

    - by Lucas806
    Someone gained access into my Ubuntu VPS via SSH, they entered rm -Rf / which wiped it and now I can't access it via SSH or SFTP. On SFTP I get the the following error: Error: Connection timed out Error: Could not connect to server And then on SSH, I try to connect to my VPS IP on Port 22, it doesn't come up with anything for ages (it should come up asking for a username) and then a op-up appears saying: Network Error: Connection timed out. Is it possible to fix this, if so, how?

    Read the article

  • Making Sense of DNS

    <b>Begin Linux:</b> "Domain Name Service (DNS) was created in 1983 out of the necessity to convert IP Addresses like 192.168.9.2 to domain names like example.com. DNS is a distributed database, what this means is that no one computer is used to maintain a complete database of all of the domains on the Internet. Instead this information is distributed across many computers."

    Read the article

  • Part Played by SEO in Success of a Business

    With the advent of the internet, a number of websites have been established. What is a website? As per its definition, website is nothing but collection of web pages, images, videos with a common domain name or IP address in an internet protocol based network.

    Read the article

  • What is SEO Hosting All About?

    Once again and without fail, there has been a new addition to the world of internet marketing. This time around, Hosting is the new predecessor that has proven to be the next big thing for internet marketers to look into. To be more specific, SEO Hosting has proven to be the most influential strategy in this regard where hosting companies offer their clients with cheap Multiple C Class IP Hosting so that they can dominate the search engine placements.

    Read the article

  • ??????????

    - by user762552
    ?????????????????????????????????????????????????????????????????????11/9???12/7?2??????????????????????????????????????????????????4???????3??????1??????2???????·?????IDS/IPS???????? ????????????????(JNSA)???????·??/??WG????????????????????????????????????????????2???????????????????????2????(90?×2)???????????????????????????????????···????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????(?????)????????????AKB48????????????????????????????(?)??????IP????????????ACL???????????????????????????????????????????????????????????????????????????????????????????????????????????

    Read the article

  • LSI RAID monitor reports "Consistency Check inconsistency logging disabled"

    - by carlpett
    I have a server with a LSI MegaRAID 9261-8i controller. Recently I started getting alerts like this one: Controller ID: 1 Consistency Check inconsistency logging disabled, too many inconsistencies on VD: 0 Generated on:Sat May 12 04:06:40 2012 SYSTEM DETAILS--- IP Address: 192.168.1.29 OS Name: Windows 7 x64 OS Version: 6.01 Driver Name: megasas.sys Driver Version: 4.5.1.64 IMAGE DETAILS--- BIOS Version: 2.120.33-1197 Firmware Package Version: 12.12.0-0045 Firmware Version: 3.21.00_4.11.05.00_0x05000000 VD 0 is a RAID mirror containing the system disk. I have searched and read, but cannot find any trace of how to actually do anything about this. I tried running a scandisk but that did not find anything (as I expected, since scandisk reads the disks as exposed by the controller, right?). The MegaRAID Storage Manager does not as far as I can see have any options for checking or fixing physical disks. The program claims the VD is "healty", and both disks have Error count 0. Also a bit strange is the System details in the message... The IP address is associated with the RAS (dial in) interface, and the OS should be Windows Server 2011 SBS. Has anyone else experienced this before? What can be done?

    Read the article

  • Remote Desktop - remote computer that was reached is not the one you specified

    - by Jim McKeeth
    We just setup some new Windows 2008 R2 servers and we are unable to Remote Desktop into them from our Windows 7 desktops. Remote desktop connects, but after we provide credentials we get: The connection cannot be completed because the remote computer that was reached is not the one you specified. This could be caused by an outdated entry in the DNS cache. Try using the IP address of the computer instead of the name. If we connect from Windows 7 to a machine not running Windows 2008 R2, or from a machine not running Windows 7 to the Windows 2008 R2 server, it works fine. Likewise if we connect to the Windows 2008 R2 server from Windows 7 via the IP address then it works fine (although that causes other problems later). I've only found one other mention of someone having this problem, so I don't think it is just our network. Any suggestions on how to connect from Windows 7 to Windows 2008 R2 via DNS? Both are 64-bit. Update: Turns out it does not need to be R2 to get the error. We have another server that is Windows 2008 R1 64-bit that also fails.

    Read the article

  • Redmine git integration - issue in accessing git from redmine but not from external git client

    - by Guruprasad
    I have setup redmine integration with apache as described in the redmine documentation. I have a /git path accessible with auth and /git-private accessible only to redmine. When I clone the repository through /git path, I get the up-to-date repo. But when I try to view it in redmine repo viewer, I get a 404 "The entry or revision was not found in the repository." error. Trying to clone using the git-private url in the redmine box gives a bare repository though it is the same repo as the one cloned by the /git path. I have enabled RedmineGitSmartHttp in the /git path. What could be the issue here? PerlLoadModule Apache::Redmine SetEnv GIT_PROJECT_ROOT /path/to/git/root SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/lib/git-core/git-http-backend/ <Location /git> AuthType Basic Require valid-user AuthName "Git" PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=<dbname>;host=<db host>" RedmineDbUser "<user>" RedmineDbPass "<password" RedmineGitSmartHttp yes </Location> <Location /git-private> Order deny,allow Deny from all <Limit GET PROPFIND OPTIONS REPORT> Options Indexes FollowSymLinks MultiViews Allow from <redmine public ip> Allow from <redmine pvt ip> Allow from <localhost> </Limit> </Location>

    Read the article

  • How do I connect two computers with a LAN cabel?

    - by John
    I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

    Read the article

  • Windows 2008, IIS7 and virtual directories

    - by Thomas
    I created a virtual directory called test (C:\test) under the Default Web Site and added two simple test files (one html and one aspx). I thought I had to add the IUSR and NetworkService (for application pools) to C:\test and grant the users appropriate rights in order for IIS7 to serve the content. It appears that is not the case at all as I can view any files in the virtual directory (even if I convert it to an application) without changing or adding any security settings on the C:\test folder. I just installed IIS7 with ASP.NET on Windows 2008 without changing any settings besides adding the virtual directory. Am I missing something? Even my book on IIS7 states that the user accounts should be added an appropriate rights should be added. I added the following to answer the comments: I am referencing the file using a public IP http://xxx.xxx.xxx.xxx/test/one.html and the IP nor localhost is in my trusted sites. I am not signed in on the server at all as I am accessing the content from my home machine and the content is on my production server. The following users/groups have access to c:\test on the server (Creator Owner, System, Administrators, Users) and the app pool is running under the default NetworkService account. I basically installed win2008, added the IIS role with asp.net. I then opened IIS7, added a virtual directory and copied two files to the directory to test. It works which is great but I want to understand why it works. How is it that IIS7 can access files in the C:\test folder without any permissions set.

    Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >