Search Results

Search found 35291 results on 1412 pages for 'start menu'.

Page 214/1412 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >

• HDMI Audio stops after TV turned off

  - by Ryan

  After the 12.04 Update my HDMI audio stops working anytime I turn off my 2nd monitor(plasma TV). Graphics card is a Radeon 6800 which has DVI out to 1st monitor, HDMI out to receiver which the TV gets it's Audio/Video. Audio is always via my receiver sound. Things work fine as long as it boots with the TV and Receiver on. Turn off the TV and BART's HDMI audio will go away, and the HDMI option vanishes from the sound menu. I had an occasional HDMI issue with 11.10 but turning on/off the TV would fix the sound. How can I hardcode things so that it always uses HDMI out of audio? I suspect the TV is sending a signal upon that 12.04 is now listening for. Turning the TV back on does NOT resolve this, and I'd suggest having the ability to override this new "feature" via sound menu.

  Read the article

• Quickly and Python Twisted

  - by Aaron

  I am creating a Quickly application that makes use of Python Twisted. When the user launches a window, I want to start the Twisted server I wrote. However, when I do this, it freezes the GUI, because the reactor.run method is constantly running after it is started. I need a way to start the Twisted reactor in its own thread, so that the GUI will continue to operate while the reactor is running. I have read about using Twisted with pyGTK in the Twisted documentation, but I am not sure how I would accomplish this with a Quickly application. What is the best way to start my Twisted server when a window opens without freezing the GUI? Update: My if __name__ == '__main__' statement at the end of my dialog file is: print 'Preparing GLib' GLib.idle_add(before_running) print 'Staring Reactor' from twisted.internet import reactor reactor.run()` I have imported and installed twisted.gtk3reactor earlier on in the file. The before_running method contains dialog = ClientDialog() and dialog.show, as well as the rest of the code I want to run when the dialog opens.

  Read the article

• Screensaver does not activate properly [closed]

  - by Ole Christian

  I do not know if this is a known feature/bug in Unity, and I am also unaware of how else to report bug-related things. I was listening to some music using banshee. My services was called upon (My SO wanted me to help with the dishes) so I clicked on the sound icon and paused the music. I left the sound icon menu open. When I came back much later, the screensaver had not yet activated. Once I closed the menu, the screensaver immediately kicked in. I am assuming that this kind of behavior is not intended. This is also easily reproducible for anyone. Has anyone else experienced this kind of behavior? Is this a (known) bug?

  Read the article

• Right-click acts too fast - No Fix Yet, Any Workaround?

  - by Aahan Krish

  When I click the right mouse button (anywhere, be it - desktop, browser, console, etc.), the right-click context menu pops up so quickly that the very *first* option in the menu gets clicked. This happens too often to take it easy. This issue has been brought up a couple of times on Ask Ubuntu, but with no fix whatsoever. This is a very low priority issue for the Ubuntu team, I believe? (How could they?!) Is there at least a workaround for the issue? Ubuntu is almost unusable for me as it is now. PS: I have a new mouse. So, please don't go about suggesting that I get a new one - - everything's working fine on Windows 7, so should be the case with ubuntu 11.10, which it is not.

  Read the article

• Which other "photo booth" program can I use besides cheese (on a Toshiba AC100)?

  - by imz

  After installing Ubuntu 12.04 on a Toshiba AC100 several days ago, as described at https://wiki.ubuntu.com/ARM/TEGRA/AC100, and seeing during the installation that the OS was able to use the camera (the installer suggested to make a photo for the first user), I wanted to play with the camera. I couldn't understand how to find a "photo booth" program in the new-style menu+desktop (not the classical menu with sections), so I remembered the popular "cheese" Linux program, and installed it via the Software Update tool (or whatever it is called; can be invoked from the panel on the desktop). But cheese doesn't start, i.e., it crashes. (The bug report telling the same.) As I said, the camera could be used by the OS on this machine -- this could be seen in the installer. Which "photo booth" programs can be installed and used without crashes in Ubuntu 12.04 on a Toshiba AC100 in order to play with the webcamera?

  Read the article

• So Pretty [Halloween Horror Short Film]

  - by Asian Angel

  A young woman riding the train at night becomes involved in an interesting conversation with a young man about vampires. She thinks vampires are mysterious and misunderstood, but will she still feel the same way by the time the train ride is over? The Continuum: Halloween Short Film – “So Pretty” [via Neatorama] 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

  Read the article

• How to run Java application in KDE with Qt-like UI?

  - by squallbayu

  Continuing my question in Install Ubuntu or Kubuntu? I have tried Kubuntu (KDE), and it was very cool as cool as Ubuntu (GNOME). but there is little problem with its user interface when we start Java application (LimeWire, Netbeans, Eclipse). User interface changed to Metal, (which I think is a bit old school). Can we run it with Qt like UI?, such as when we start Java application in Gnome (run with GTK like UI/emulation GTK like UI)? I hear there is a class for Java in order to make Java application UI like Qt, called the Qt/Jambi bindings for Java. How can we integrate it in KDE when we start Java application? My other question is if not wrong, OpenOffice was built in Java,so why OpenOffice can run with Qt like UI in KDE?

  Read the article

• Kile missing "Settings" dialog after update to kubuntu 12.10

  - by William

  After update to Kubuntu 12.10, I can no longer access configuration options in Kile from Settings-Configure kile (or whatever the menu entry was for configuration). In fact, "Settings" menu has only five entries: "Define current document as master document", "System check", "Show side bar", "Show message bar", and "Toolbars shown." I did a fresh install of Kubuntu 12.10 on one of my other computers, and same problem. I even tried adding the (unsupported) ppa:kile/stable, but the problem persists. Any ideas? I need to access settings to set PDF Latex to use "modern" compilation mode, so that I can use synctex.

  Read the article

• 12.04 indicates filesystem check on next boot, but never does one

  - by pcm

  Just installed 12.04 32 bit on my machine, with 3 drives. When I open a terminal window or ssh in remotely, I see: Welcome to Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-29-generic-pae i686)  * Documentation:  https://help.ubuntu.com/ *** /dev/sda1 will be checked for errors at next reboot *** *** /dev/sda2 will be checked for errors at next reboot *** *** /dev/sdg1 will be checked for errors at next reboot *** Last login: Fri Aug 31 08:15:41 2012 from .... However, if I reboot, I never see it doing a disk check on boot up, like I used to see with 10.10. Note, after install, I was not seeing the grub menu on boot. I made a ISO disk with BootRepair and now I get the normal grub menu. Any idea as to why the disk check is not happening on boot (I know I can boot a Live CD and then check the disk - I just want the check on boot working)?

  Read the article

• How to access shared folders in Ubuntu VM(Oracle Virtualbox) and link them to the home folder(Answered)

  - by Njihia

  I have configured a shared folder between the Windows host and Ubuntu guest. The folder mounts at start up but its empty(It also has a padlock sign.). I have to run the command below to access its content(the padlock sign disappears). sudo mount.vboxsf media ~/media How can i configure it to be run automatically at start up. I've tried adding to the start up programs but nothing happens. Am new to Linux so try to put your answer in a layman's language. Thanks.

  Read the article

• IntelliTrace collector error Some or all identity references could not be translated

  - by Tarun Arora

  If you are running the IntelliTrace stand alone collector to collect the trace against an Application Pool which is running under the identity “.\<username>” then you are likely to run into the following exception, Start-IntelliTraceCollection : Some or all identity references could not be translated. At line:1 char:29 + Start-IntelliTraceCollection <<<<  "FabrikamFiber.Web" C:\IntelliTraceCTP\collection_plan.ASP.NET.trace.xml C:\Intell iTraceLogs     + CategoryInfo          : NotSpecified: (:) [Start-IntelliTraceCollection], IdentityNotMappedException     + FullyQualifiedErrorId : System.Security.Principal.IdentityNotMappedException,Microsoft.VisualStudio.IntelliTrace    .PowerShell.StartIntelliTraceCollectionCommand   Steps to reproduce the issue The application pool “FabrikamFiber.Web” is using the identity “.\Admin”   Workaround Change the identity of the application pool to <MachineName|Domain>\<UserName>. So, in the above work around if I change the identity to “Production\Admin” then the IntelliTrace does not throw an exception. This error has been reported to Microsoft and it is expected that it will be fixed in one of the future releases. Enjoy!

  Read the article

• Lubuntu 14.04 graphics problem on portege r100

  - by user286069

  first of all I have to say that I am not an expert. I have installed Lubuntu 14.04 on my Portege R100. The problem is that the graphics session does not start. Actually I can do all but only by command line. I try to start Xsession but nothing happens. Actually by typing startx the system stop to works. I read several threads on this topic but I did not find such kind of problem. There is something similar about portege r100 concerning lowgraphics mode but the porblem I have seems to be different because graphics session does not start. Can anyone help me ? Thank you Best

  Read the article

• Half the time Linux drop into BusyBox; the rest of the time the boot happens normally

  - by JoBu1324

  I just installed Ubuntu x64 onto a USB3 Drive from a DVD, and half the time it appears to skip the grub menu and boots directly into BusyBox. Since the USB3 drive is an SSD, I ran through the full installation (installing on an ext4 partition, along side a 1GB boot partition at the start of the disk), skipping the swap partition. Part of the time that the Grub Menu does shows, it boots into BusyBox with an error: ALERT! /dev/disk/by-uuid/[uid] does not exist. Dropping to a shell! What could cause such an issue?

  Read the article

• What is the order of diagram drawing in a design?

  - by Manuel Malagon

  I'm new with OOP and UML and I have some confusion here. I'd like to know where to start, I mean, somebody comes to you and ask you to do something (involves software design of course), once you have determined what has to be done, what is the order in which you have to start the software architecture? I mean, is it first the use case diagram or the class diagram? or should I draw some diagrams in parallel? But basically, where should I start? and what UML diagram goes first? Thanks for helping!!

  Read the article

• Problems with the colors on my screen. How can I check if it's a hardware problem?

  - by Ingo Gerth

  On my EEE PC netbook some colors are not displayed properly. Specifically, dark gradients such as in the window title do not look very smooth, but rather look like a sequence of a couple of different colors. This is especially visible when opening a menu, for example the "File" menu in Firefox. As you know this one is black, and it looks terrible on my screen. It is not just black, but the colors look really graded and far from a smooth gradient or anything. Now I am wondering: Is this a hardware or software issue? And how can I check this? If it should be a fixable problem I think it would be worth another question. Note that I am using Natty. If my problem description is not good enough I can try to take a photo.

  Read the article

• Grub errors dual boot Windows 8 / Ubuntu 12.10

  - by luca-mastro

  I have got a newly bought ASUS N56V with Windows 8 preinstalled. I needed to install Ubuntu so i partitioned the disk and after having disabled the Secure Boot option from Windows 8 i successfully installed Ubuntu 12.10 from a Live USB. The problem is that if i try to access both to Windows 8 (loader) and Windows Recovery System (loader) from the grub menu, these tow errors show: "can't find command 'drivemap' " and "invalid EFI file path" and it goes back to the grub menu. In conclusion I do not have access to my Windows 8 partition but can only use Ubuntu. How can I solve the problem? I am pretty new to the matter. Thank you!

  Read the article

• How To Delete Your Skype Call and Chat History

  - by Gopinath

  Just like every other modern application, Skype also records all the communications we exchange using it. It records instant messages, calls, file transfers, SMS, etc. and makes it easy to view using the Conversation tab. If you ever feel like getting rid of these history information, then you need to delete them. Skype provides a single click option to clear all the history from you account, but the feature is buried deep under options menu.Really deep!. To clear history follow the menu Tools –> Options, switch to Privacy Settings tab available on the left side, click on Show advanced options button and finally hit the button Clear history. Ah! You are almost done. Just confirm a popup it displays on screen and your history is vanished from your account. Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Is it bad form to stage a function's steps in intermediate variables (let bindings)?

  - by octopusgrabbus

  I find I tend to need intermediate variables. In Clojure that's in the form of let bindings, like cmp-result-1 and cmp-result-2 in the following function. (defn str-cmp "Takes two strings and compares them. Returns the string if a match; and nil if not." [str-1 str-2 start-pos substr-len] (let [cmp-result-1 (subs str-1 start-pos substr-len) cmp-result-2 (subs str-2 start-pos substr-len)] (compare cmp-result-1 cmp-result-2))) I could re-write this function without them, but to me, the function's purpose looks clearer. I tend to do this quite in a bit in my main, and that is primarily for debugging purposes, so I can pass a variable to print out intermediate output. Is this bad form, and, if so, why? Thanks.

  Read the article

• I can't even login, black screen! [SOLVED]

  - by Elisa Velasco Lorenzo

  I wanted to fix something, and I followed the advice given by someone on the #ubuntu IRC chat. I don't think I did it properly, because now, I cannot even login and I have a black screen. Ii must be a Gdm / Lightdm issue... I am writing this from another computer. Is there a way I can solve this without formatting and losing all my files? All I have is the GRUB menu. I don't even have the recovery mode on the GRUB menu...

  Read the article

• MacBookPro 7,1 can only see one cpu

  - by gozzilli

  On a MacBookPro 7,1 running ubuntu 11.10, System monitor only sees 1 core (instead of 2). cat /proc/cpuinfo | grep 'cpu cores' also gives: cpu cores : 1 I followed this guide and added acpi_apic_instance=2 to the line with GRUB_CMDLINE_LINUX_DEFAULT, but that doesn't seem to change the situation. What can I do? I'm using rEFIt, installed under MacOS, and running in dual boot with MacOS. After the rEFIT menu, I'm still presented with the GRUB menu (I'm assuming that's normal). I saw similar posts on this matter, but could not fix my problem with what they suggested. EDIT: With the method mentioned above the computer runs sometimes with 1 core and other times with 2. Why is that? How can it be fixed?

  Read the article

• Loading assets in Monogame

  - by Matebu

  I'm creating a MonoGame application on Visual Studio 2012, yet when trying to load a texture I get the following problem: Could not load Menu/btnPlay asset! I have set content directory: Content.RootDirectory = "Assets"; Also the file btnPlay.png has properties set: Build Action: Content and Copy to Output directory: Copy if newer. My constructor and LoadContent functions are totally empty, but have a look yourself: public WizardGame() { Window.Title = "Just another Wizard game"; _graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Assets"; } protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. _spriteBatch = new SpriteBatch(GraphicsDevice); Texture2D texture = Content.Load<Texture2D>("Menu/btnPlay"); _graphics.IsFullScreen = true; _graphics.ApplyChanges(); } How do I properly load a texture?

  Read the article

• Semi-transparent parts of theme show as full white

  - by Kilian

  I am running ubuntu 10.04 64bit on a macbook pro, using the nvidia-drivers version 260.19.29. As of a recent kernel update, all the semi-transparent parts of my theme show as full white. This means: no gradients on scrollbars and buttons, 'inverted' dividers in context menu's, full white gnome-do panel etc. Does anyone know what causes this and how I can fix it? Screenshot examples below. Scrollbars: Gnome-do: 'inverted' dividers in the context menu: (Last two links are not links due to not having sufficient points)

  Read the article

• What to learn for a pure practical developer to get better?

  - by ChrisRamakers

  I'm a self taught developer that currently has more than enough experience to hold up against my colleagues waving with their degrees, yet I feel that I'm lacking some important skills to advance further into being a senior level professional in a leading role. More specific in the engineering, planning and designing aspect of software. I've touched the surface of UML, ERM/ERD, have experienced both waterfall and scrum projectmanagement, ... yet I feel there is something missing as every time I start on a new project I don't know where to begin. Should I start diagramming and how? should I start writing an xx page document describing the project on a technical level first, should I dive head first into writing the first tests and code or pseudo-code? I would like to know what, in my case, would be the best way forward, to learn how I can tackle this problem in the future and get better at leading and starting a project. There is not much i don't know about my technical tools and languages but when it gets abstract i'm in trouble.

  Read the article

• Catalyst forgets monitor settings after reboot or log out in 12.10

  - by Mate Weisz

  I have a Samsung monitor connected to my ATI Radeon graphic card via HDMI. By default the screen has a black border around, but I can disable it in the Catalyst menu to get full screen. (There is a scalebar that I have to set to the highest value.) My problem is that every time I turn off and on my computer it changes back and I have to set it up again. It is really annoying. Is there any way to make this setting permanent? Notes: 1. I open Catalyst with admin rights. 2. When I open the Catalyst settings menu, it looks like that it keeps my settings, because the scalebar stays at the highest point, but still it doesn't scale up my screen until I move back and forth the scale bar to the same point

  Read the article

• Grub2 with BURG: duplicate Windows entries, how do I remove one?

  - by Tomas Lycken

  I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

  Read the article

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221  | Next Page >