Search Results

Search found 14407 results on 577 pages for 'business rules'.

Page 215/577 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

• Remove directory from URL IIS 7.5

  - by xalx

  I've tried to find a solution to this and found some guides out there but none seem to work. I have the following URL - http://www.mysite.com/aboutus.html However there are some other sites which link to my old hosted site and point to http://www.mysite.com/nw/aboutus.html. My issue here is trying to remove the 'nw' directory from the URL's. I have setup the following URL Rewrite in IIS but it does not seem to do anything, <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <rewrite> <rules> <rule name="Redirect all to root folder" enabled="true" stopProcessing="true"> <match url="^nw$|^/nw/(.*)$" /> <conditions> </conditions> <action type="Redirect" url="nw/{R:1}" /> </rule> <rule name="RewriteToFile"> <match url="^(?!nw/)(.*)" /> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> </conditions> <action type="Rewrite" url="/{R:1}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Any insight would be appreciated.

  Read the article

• IIS 7.0 rewrite url problem

  - by Jouni Pekkola

  Hello, How i can set redirect url for virtual directory in iis 7.0.I have installed lates url rewrite module 2. ? I could explain my problem with exsample. I have website on my iis 7.0 server: www.mysite.com I desided to create virtual directory sales under my site which is pointing to website root directory.Now I need create redirect url for the vdir. The vdir is pointing same virtual root directory as my site root is The big idea is that i can write on browser www.mysite/sales and i will automaticly redirect to url www.mysite.com?productid=200. I tried to make redirect with rewite url for vdir(not website), but I always get this error message : cannot add duplicate colletion entry of type 'rule' with unique key key attribute 'name' set to "test".This happens when i am pointing for virtual vdir and try to add rule. I can add rules to website level,but rules doesn work. I mean url www.mysite/sales gives me follwing error. I know that key is unique I checked it from web.config. This kind of feature was really easy use in IIS 6.0, just point vdir with your mouse and set properties--a redirect to url. Please some one explain what is right way to do it in IIS 7.0

  Read the article

• Reverse Proxy issues IIS on Windows Server 2012

  - by ahwm

  I've tried searching, but nothing seems to be working. I have a feeling it might be due to our custom Rewrite module. Here is the excerpt from the web.config that sets it up: <modules runAllManagedModulesForAllRequests="true"> <add name="UrlRewriteModule" type="EShop.UrlRewriteModule"/> </modules> EShop.UrlRewriteModule is a custom class in App_Code which handles incoming requests. I have set up the rewrite rules but it doesn't seem to want to work. I'm inclined to think that our rewrite class is interfering earlier than the proxy rules and saying that the page doesn't exist. Here's what we're trying to accomplish: We are working on a new site for a client, but they have a forum that they're not likely to want to move. I set up a new subdomain to point to the new server while the site is being completed (before we go live) and want the reverse proxy to forward test.domain.com/forum to www.domain.com/forum. After the site goes live, we'll need to forward using an IP address instead. I've set up a reverse proxy successfully with nginx, but we didn't want to set up another server if we didn't need to. Ideas?

  Read the article

• Redirect from folder containing website

  - by Sam

  I have a website reached from this url: http://www.mysite.com/cms/index.php being served from this directory: public_html/cms/index.php In public_html I have this .htaccess RewriteRule (.*) cms/$1 [L] Which lets me get to the site like this: http://www.mysite.com/index.php But now if I reference the 'old' address, I'd like to redirect to the rewritten address with a permanent redirect code. for example: http://www.mysite.com/cms/?q=node/1 is redirected to... http://www.mysite.com/?q=node/1 How can I make this happen? EDIT: Also in the .htaccess file supplied with Drupal(cms), this is written. I've tried enabling it, but it doesn't seem to have any effect. # Modify the RewriteBase if you are using Drupal in a subdirectory or in a # VirtualDocumentRoot and the rewrite rules are not working properly. # For example if your site is at http://example.com/drupal uncomment and # modify the following line: # RewriteBase /drupal EDIT: Including more of my .htaccess file - seems relevant. # Block access to "hidden" directories whose names begin with a period. RewriteRule "(^|/)\." - [F] #Strip cms folder from url RewriteRule (.*) cms/$1 RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !=/favicon.ico RewriteRule ^ index.php [L] # Rules to correctly serve gzip compressed CSS and JS files. # Requires both mod_rewrite and mod_headers to be enabled. <IfModule mod_headers.c> # Serve gzip compressed CSS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.css $1\.css\.gz [QSA] # Serve gzip compressed JS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.js $1\.js\.gz [QSA] # Serve correct content types, and prevent mod_deflate double gzip. RewriteRule \.css\.gz$ - [T=text/css,E=no-gzip:1] RewriteRule \.js\.gz$ - [T=text/javascript,E=no-gzip:1] <FilesMatch "(\.js\.gz|\.css\.gz)$"> # Serve correct encoding type. Header append Content-Encoding gzip # Force proxies to cache gzipped & non-gzipped css/js files separately. Header append Vary Accept-Encoding </FilesMatch>

  Read the article

• OpenBSD pf - implementing the equivalent of an iptables DNAT

  - by chutz

  The IP address of an internal service is going to change. We have an OpenBSD access point (ssh + autpf rules) where clients connect and open a connection to the internal IP. To give us more time to reconfigure all clients to use the new IP address, I thought we can implement the equivalent of a DNAT on the authpf box. Basically, I want to write a rule similar to this iptables rule which lets me ping both $OLD_IP and $NEW_IP. iptables -t nat -A OUTPUT -d $OLD_IP -j DNAT --to-dest $NEW_IP Our version of OpenBSD is 4.7, but we can upgrade if necessary. If this DNAT is not possible we can probably do a NAT on a firewall along the way. The closest I was able to accomplish on a test box is: pass out on em1 inet proto icmp from any to 10.68.31.99 nat-to 10.68.31.247 Unfortunately, pfctl -s state tells me that nat-to translates the source IP, while I need to translate the destination. $ sudo pfctl -s state all icmp 10.68.31.247:7263 (10.68.30.199:13437) -> 10.68.31.99:8 0:0 I also found lots of mentions about rules that start with rdr and include the -> symbol to express the translation, but it looks like this syntax has been obsoleted in 4.7 and I cannot get anything similar to work. Attempts to implement a rdr fail with a complaint that /etc/pf.conf:20: rdr-to can only be used inbound

  Read the article

• Remote network traffic not passing through VPN

  - by John Virgolino

  We have the following topology: LAN A LAN B LAN C 10.14.0.0/16 <-VPN-> 10.18.0.0/16 --- SONICWALL <-VPN-> M0N0WALL --- 10.32.0.0/16 Traffic between LAN A and LAN B works perfectly. Traffic between LAN C and LAN B works perfectly. Traffic between LAN A and LAN C, not so much. LAN A's gateway has a route to LAN C that points to the Sonicwall. The Sonicwall has a route to LAN A pointing to the VPN gateway connecting LAN B to LAN A. Tracing packets on the Sonicwall shows the LAN C destined traffic to arrive on the Sonicwall, but it does not forward the traffic, it dies there. Traffic from LAN B gets forwarded. Tracing packets on the Sonicwall while sending traffic from LAN C destined for LAN A shows nothing. This tells me that the M0N0WALL is not forwarding traffic for the 10.14.0.0 network and the Sonicwall is not forwarding from 10.14.0.0. The SA on the Sonicwall terminates on the WAN ZONE and is defined to use an address group that incorporates both the 10.14.0.0 and 10.18.0.0 networks. The M0N0WALL is configured for the 10.18.0.0 network and I have tried with both a static route to 10.14.0.0 and without on the M0N0WALL. I tried manually adding the 10.14.0.0 network to the SA on the M0N0WALL, but that really aggravated it and the SA never came up, so I reverted. I have checked all the firewall rules to make sure nothing is blocked. All of the Sonicwall auto-added rules look right. Specs: Sonicwall TZ200, Enhanced OS M0N0WALL v1.32 I'm at a loss at this point. Any help would be appreciated.

  Read the article

• Dns - wildcard vs. cname subdomains

  - by Matthew

  Alright I have to admit I'm confused with how DNS works. I've always just added things until they worked, and now it's time to learn how they work. So one confusing thing to me is that there's sort of two places I can have records. I have an account with rackspace cloud servers. And then there's the place I registered the domain. But both allow me to edit DNS records. Should I do everything at both places or is one better than the other or am I missing the point? Subdomains confuse me too. I'd like to be able to just have a wildcard subdomain (I've done this in the past.) I just don't like the idea of adding a cname record or A record every time I need a new subdomain. Then I read this and it says: The exact rules for when a wild card will match are specified in RFC 1034, but the rules are neither intuitive nor clearly specified. This has resulted in incompatible implementations and unexpected results when they are used.

  Read the article

• iptables, blocking large numbers of IP Addresses

  - by Twirrim

  I'm looking to block IP addresses in a relatively automated fashion if they look to be 'screen scraping' content from websites that we host. In the past this was achieved by some ingenious perl scripts and OpenBSD's pf. pf is great in that you can provide it nice tables of IP addresses and it will efficiently handle blocking based on them. However for various reasons (before my time) they made the decision to switch to CentOS. iptables doesn't natively provide the ability to block large numbers of addresses (I'm told it wasn't unusual to be blocking 5000+), and I'm a bit cautious over adding that many rules into an iptable. ipt_recent would be awesome for doing this, plus it provides a lot of flexibility for just severely slowing down access, but there is a bug in the CentOS kernel that is stopping me from using it (reported, but awaiting fix). Using ipset would entail compiling a more up-to-date version of iptables than comes with CentOS which whilst I'm perfectly capable of doing it, I'd rather not do from a patching, security and consistency perspective. Other than those two it looks like nfblock is a reasonable alternative. Is anyone aware of other ways of achieving this? Are my concerns about several thousand IP addresses in iptables as individual rules unfounded?

  Read the article

• Problems forwarding port 3306 on iptables with CentOS

  - by BoDiE2003

  Im trying to add a forward to the mysql server at 200.58.126.52 to allow the access from 200.58.125.39, and Im using the following rules (its my whole iptables of the VPS of my hosting). I can connect locally at the server that holds the mysql service as localhost, but not from outside. Can someone check if the following rules are fine? Thank you # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp -s 200.58.125.39 --dport 3306 -j ACCEPT -A INPUT -p tcp -s 200.58.125.39 --sport 1024:65535 -d localhost --dport 3306 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -s localhost --sport 3306 -d 200.58.125.39 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT And this is the output of the connection trial. [root@qwhosti /home/qwhosti/public_html/admin/config] # mysql -u user_db -p -h 200.58.126.52 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '200.58.126.52' (113)

  Read the article

• KVM virtual machine unable to access internet

  - by peachykeen

  I have KVM set up to run a virtual machine (Windows Home Server 2011 acting as a build agent) on a dedicated server (CentOS 6.3). Recently, I ran updates on the host, and the virtual machine is now unable to connect to the internet. The virtual network is running through NAT, the host has an interface (eth0:0) set up with a static IP (virt-manager shows the network and its IP correctly), and all connections to that IP should be sent to the guest. The host and guest can ping one another, but the guest cannot ping anything above the host, nor can I ping the guest from anywhere else (I can ping the host). Results from the guest to another server under my control and from an external system to the guest both return "Destination port unreachable". Running tcpdump on the host and destination shows the host replying to the ping, but the destination never sees it (it doesn't even look like the host is bothering to send it on at all, which leads me to suspect iptables). The ping output matches that, listing replies from 192.168.100.1. The guest can resolve DNS, however, which I find rather odd. The guest's network settings (connection TCP/IPv4 properties) are set up with a static local IP (192.168.100.128), mask of 255.255.255.0, and gateway and DNS at 192.168.100.1. When originally setting up the vm/net, I had set up some iptables rules to enable bridging, but after my hosting company complained about the bridge, I set up a new virtual net using NAT and believe I removed all the rules. The VM's network was working perfectly fine for the last few months, until yesterday. I haven't heard anything from the hosting company, didn't change anything on the guest, so as far as I know, nothing else has changed (unfortunately the list of packages updated has since fallen off scrollback and I didn't note it down).

  Read the article

• Seperate external and intranet portals using the same functions .htaccess

  - by jezzipin

  We are currently struggling with setting up rules for a .htaccess file for a website built upon our company product. The product is built using PLSQL and procedures can be accessed using URLs. We use this functionality to present different options to our users. These options can be injected into HTML pages using replacement tags. So, the tag [user_menu] is always replaced with: /wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} for external sites and /intranet/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} for internal sites. The issue we are having is twofold. We need to write our .htaccess rules so that the user can access the functionality whether they are internal or external. So, the links should work as follows: http://www.example.com/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} or http://www.example.com/internal/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} This is the other problem. As you can see for the internal link above, the procedure needs to be prefixed with internal instead or intranet. We cannot change this in our standard tags as this will affect other sites so we need to achieve this also using htaccess. Could anyone assist with this issue? I apologise if this is brief or confusing but it's something i've never done before and have been given the task of doing. I apologise for the lack of code that will be posted above however I am a front end developer and have been left to make these changes having no prior experience of .htaccess to please bare with me.

  Read the article

• Linux as a router for public networks

  - by nixnotwin

  My ISP had given me a /30 network. Later, when I wanted more public ips, I requested for a /29 network. I was told to keep using my earlier /30 network on the interface which is facing ISP, and the newly given /29 network should be used on the other interface which connects to my NAT router and servers. This is what I got from the isp: WAN IP: 179.xxx.4.128/30 CUSTOMER IP : 179.xxx.4.130 ISP GATEWAY IP:179.xxx.4.129 SUBNET : 255.255.255.252 LAN IPS: 179.xxx.139.224/29 GATEWAY IP :179.xxx.139.225 SUBNET : 255.255.255.248 I have a Ubuntu pc which has two interfaces. So I am planning to do the following: eth0 will be given 179.xxx.4.130/30 gateway 179.xxx.4.129 eth1 will be given 179.xxx.139.225/29 And I will have the following in the /etc/sysctl.conf: net.ipv4.ip_forward=1 These will be iptables rules: iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT My clients which have the ips 179.xxx.139.226/29 and 179.xxx.139.227/29 will be made to use 179.xxx.139.225/29 as gateway. Will this configuration work for me? Any comments? If it works, what iptables rules can I use to have a bit of security? P.S. Both networks are non-private and there is no NATing.

  Read the article

• Uploads fail with shorewall enabled

  - by JamesArmes

  I have an Ubuntu 8.04 server with shorewall 4.0.6 installed. When I try to upload files using FTP, SCP, or cURL the file upload stalls almost immediatly and eventually times out. If I turn off shorewall then the uploads work fine. I don't have any rules that specifically allow FTP and I'm not too concerned with it, but I do need to be able to upload via 22 (SCP) and 80 & 443 (cURL). This is what my rules look like: COMMENT Allow Server to respond to any web (80) and SSL (443) requests ACCEPT net $FW tcp 80 ACCEPT $FW net tcp 80 ACCEPT net $FW tcp 443 ACCEPT $FW net tcp 443 COMMENT Allow Server to respond to SNMPD (161) requests ACCEPT net $FW udp 161 COMMENT Allow Server to respond to MySQL (3306) requests (for MySQL Graphing) ACCEPT net $FW tcp 3306 COMMENT Allow Server to respond to any SSH connection attempts, and to SSH out. SSH/ACCEPT net $FW SSH/ACCEPT $FW net COMMENT Allow Server to make DNS Requests out. DNS/ACCEPT $FW net COMMENT Default "close" anything else. Ping/REJECT net $FW ACCEPT $FW net icmp #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE I expected the top four ACCEPT lines to allow inbound and outbound traffic over 80 and 443 and I expected the two SSH/ACCEPT lines to allow inbound and outbound trffic over 22, including SCP. Any help is greatly appreciated. /etc/shorewall/policy contains the following (all lines above are commented out): # # Allow all connection requests from teh firewall to the internet # $FW net ACCEPT # # Policies for traffic originating from the Internet zone (net) # Drop (ignore) all connection requests from the Internet to the firewall # net all DROP info # THE FOLLOWING POLICY MUST BE LAST # Reject all other connection requests all all REJECT info #LAST LINE -- ADD YOUR ENTRIES ABOVE THIS LINE -- DO NOT REMOVE

  Read the article

• ASA access lists and Egress Filtering

  - by Nate

  Hello. I'm trying to learn how to use a cisco ASA firewall, and I don't really know what I'm doing. I'm trying to set up some egress filtering, with the goal of allowing only the minimal amount of traffic out of the network, even if it originated from within the inside interface. In other words, I'm trying to set up dmz_in and inside_in ACLs as if the inside interface is not too trustworthy. I haven't fully grasped all the concepts yet, so I have a few issues. Assume that we're working with three interfaces: inside, outside, and DMZ. Let's say I have a server (X.Y.Z.1) that has to respond to PING, HTTP, SSH, FTP, MySQL, and SMTP. My ACL looks something like this: access-list outside_in extended permit icmp any host X.Y.Z.1 echo-reply access-list outside_in extended permit tcp any host X.Y.Z.1 eq www access-list outside_in extended permit tcp any host X.Y.Z.1 eq ssh access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp-data established access-list outside_in extended permit tcp any host X.Y.Z.1 eq 3306 access-list outside_in extended permit tcp any host X.Y.Z.1 eq smtp and I apply it like this: access-group outside_in in interface outside My question is, what can I do for egress filtering? I want to only allow the minimal amount of traffic out. Do I just "reverse" the rules (i.e. the smtp rule becomes access-list inside_out extended permit tcp host X.Y.Z.1 any eq smtp ) and call it a day, or can I further cull my options? What can I safely block? Furthermore, when doing egress filtering, is it enough to apply "inverted" rules to the outside interface, or should I also look into making dmz_in and inside_in acls? I've heard the term "egress filtering" thrown around a lot, but I don't really know what I'm doing. Any pointers towards good resources and reading would also be helpful, most of the ones I've found presume that I know a lot more than I do.

  Read the article

• Secure NAT setup with iptables

  - by TheBigB

  I have Debian running device that needs to act as an internet-gateway. On top of that I want to provide a firewall that not only blocks inbound traffic, but also outbound traffic. And I figured iptables should be able to do the job. The problem: I've configured NAT properly (I think?), but once I set the default policy to DROP and add rules to for instance allow HTTP traffic from inside the LAN, HTTP is not going through. So basically my rules don't seem to work. Below is the initialization script that I use for iptables. The device has two NICs, respectively eth0 (the WAN interface) and eth1 (the LAN interface). echo 1 > /proc/sys/net/ipv4/ip_forward # Flush tables iptables -F iptables -t nat -F # Set policies iptables -P INPUT DROP iptables -P OUTPUT DROP # NAT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT # Allow outbound HTTP from LAN? iptables -A FORWARD -i eth1 -o eth0 -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT Can anyone shed some light on this?

  Read the article

• Reverse web proxy with time constraints

  - by user2893458

  I have a web application which produces several unique URLs of the type http://service.company.com/service.html?type=aaaa&key=jfiZm6u6cW where the last part is a randomly generated key. Each such URL provides access to an instance of the service provided. I am looking for a way to restrict access to those URLs based on time constraints, as an example URL#1 should be available between 8:00AM and 10:00AM on May 30, URL#2 should be available between 10:30AM and 12:00PM on May 31, and so on. I already have a resource scheduling application based on Drupal and would like to find a way to include those URLs as scheduled resources. The web application is deployed on Apache Tomcat, so I don't have the knowledge or the resources to alter it, therefore I thought that I could put some sort of reverse proxy in front of the web app that could implement the time constraint feature. In my thoughts the reverse proxy would allow or disallow access to each URL based on the rules that my scheduling application would provide. There may be other ways to deliver such a solution, but I can't think of anything better, so the question is: is there a reverse web proxy architecture that could allow access to the destination URLs based on time and date rules? Any other ideas are more than welcome.

  Read the article

• Nginx and Wordpress side-by-side with static directory alias?

  - by user117161

  I'm a Nginx novice, but I have it set up with Wordpress Multisite (subdirectories) and php-fpm, and it's working great as is. This lets me set up Wordpress sites off the web root: domain.com/site1 - a Wordpress network single site, which renders as expected. domain.com/site2 - ditto etc. Concurrently, I can easily create static files in the web root that don't conflict or interact with Wordpress, and they are also rendered normally. domain.com/hello.html - rendered normally domain.com/hello.php - rendered normally, including php processing domain.com/static/hello.php - rendered normally (along as "static" isn't a WP single site name) What I'd like to do, and this is where I'm out of my depth with nginx.conf, is create a root directory domain.com/static and put static sites in there domain.com/static/site3 domain.com/static/site4 and have Nginx check the request that comes into the root request comes in for: domain.com/site3 and before handing off to Wordpress, check to see if it exists in the /static folder checks: domain.com/static/site3 - static content exists there and if so, serves that content while maintaining the root URI. serves: domain.com/site3 (with content from domain.com/static/site3) if not, it lets Wordpress check if /site3 is a Wordpress single network site as it does now, and the process continues normally. In nginx.conf, in the server section, I start with this try_files rule: location / { try_files $uri $uri/ /index.php?q=$uri&$args; } I then include a bunch of Wordpress specific rules as identified at http://codex.wordpress.org/Nginx under the subdirectory section. I can see that rewrite rules might take care of it easily, but in my experimentation I've only achieved a bunch of looping (/static/static/static, etc.) and managed to bypass Wordpress if the looping stopped. Sorry if this is a very long-winded way of asking a simple question, but I'm definitely learning some of this stuff for the first time. Thanks!

  Read the article

• iptables (DNAT)

  - by user1126425

  I have a host that acts as a gateway for other hosts. The configuration is such that eth0(192.168.1.3) is connected to internet via a router and eth1(172.16.2.50) is connected to internal network via switch. Given that, this host is also running a service that is bound to eth1 and serves the internal network. I want to extend this service to the outside world as well and was trying to manipulate iptables so that any request that comes to this host via eth0 and is directed to 192.168.1.3:80 is send to 172.16.2.50 and internet users can also make use of the service. Here are my iptable rules for setting up the host as gateway (and these work fine): sudo iptables -t nat -A POSTROUTING -s 172.16.2.0/16 -o eth0 -j MASQUERADE sudo iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o eth1 -j MASQUERADE sudo iptables -A FORWARD -s 172.16.2.0/16 -o eth0 -j ACCEPT sudo iptables -A FORWARD -d 172.16.2.0/16 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT And these are the rules that I am trying to add to the iptables to achieve my ends: sudo iptables -A INPUT -d 192.168.1.3 -p tcp -dport 80 -i eth0 -j ACCEPT sudo iptables -t nat -A PREROUTING -d 192.168.1.3 -p tcp -dport 80 -j DNAT --to-destination 172.16.2.50:80 sudo iptables -t nat -A PREROUTING -s 172.16.2.50 -p tcp -sport 80 -j SNAT --to-source 192.168.1.3:80 sudo iptables -A FORWARD -d 192.168.1.3 -p tcp -dport 80 -m state --state ESTABLISHED,RELATED -j ACCEPT When I do so, I get error like : "multiple -d flags not allowed" ... Can someone tell me how to resolve this error... and do the entries that I want to add will serve my purpose ? Thanks!

  Read the article

• Audit file removal (auditctl)

  - by user1513039

  For some reason, some script or program is removing a pid file for the service on the linux server (centos5.4 / 2.6.18-308.4.1.el5xen). I suspect a faulty cron script, but manual investigation did not lead me to it. And i still want to track it down. Have been using auditctl rule: auditctl -w /var/run/some_service.pid -p w Which helped me to see something, but not quite exactly what i wanted: type=PATH msg=audit(11/12/2013 09:07:43.199:432577) : item=1 name=/var/run/some_service.pid inode=12419227 dev=fd:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=SYSCALL msg=audit(11/12/2013 09:07:43.199:432577) : arch=x86_64 syscall=unlink success=yes exit=0 a0=7fff7dd46dd0 a1=1 a2=2 a3=127feb90 items=2 ppid=3454 pid=6227 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=pts0 ses=38138 comm=rm exe=/bin/rm key=(null) Problem here is that i see ppid of the script that removed the file, but at the analysis time the (p)pids are already invalid as probably scripts/programs have been shutdown. Imagine a cron script deleting the file. So i need some way to expand/add audit rule(s) to be able to trace the parents of the /bin/rm at the time of removal. I have been thinking to add some rule to monitor all process creation, something like: auditctl -a task,always But this happen to be very resource intensive. So i need help or advice how to combine these rules, or how to expand any of the rules to help track the script/program. Thanks.

  Read the article

• Apache not routing to tomcat on correct Virtual host

  - by ttheobald

  We are looking at moving from Websphere to Tomcat. I'm trying to send traffic to tomcat from apache web server based on the virtual host directives in apache web server. After some playing around I have it sort of working, but I'm noticing that if I have a JKMount directive in the first VirtualHost in apache, all virtualHosts will send to the application server. If I have the JKMount in Virtual hosts further down in the configs, then only that VirtualHost works with the request. For Example, with the configs below here are my symptoms mysite.com/Webapp1/ -- I resolve to the proper application mysite2.com/Webapp1/ -- I resolve to the proper application (bad!) mysite.com/MonitorApp/ -- I resolve to the proper application mysite2.com/MonitorApp/ -- I resolve to the proper application (bad!) mysite.com/Webapp2/ -- I DO NOT get to the app (good) mysite2.com/Webapp2/ -- I resolve to the proper application Here's what my web server virtualhosts look like. <VirtualHost 255.255.255.1:80> ServerName mysite.com ServerAlias aliasmysite.ca ##all our rewrite rules JkMount /Webapp1/* LoadBalanceWorker JKmount /MonitorApp/* LoadBalanceWorker </VirtualHost> <VirtualHost 255.255.255.2:80> ServerName mysite2.com ServerAlias aliasmysite2.ca ##all our rewrite rules JkMount /Webapp2/* LoadBalanceWorker </VirtualHost> we are running apache webserver 2.2.10 and tomcat 7.0.29 on Solaris10 I've posted an image of our architecture here. http://imgur.com/IFaA6Rh I HAVE not defined VirtualHosts on Tomcat. Based on what I've read, my understanding is that it's only needed if I'm accessing Tomcat directly. Any assistance is appreciated. Edit Here's my worker.properties. worker.list= LoadBalanceWorker,App1,App2 worker.intApp1.port=8009 worker.intApp1.host=10.15.8.8 worker.intApp1.type=ajp13 worker.intApp1.lbfactor=1 worker.intApp1.socket_timeout=30 worker.intApp1.socket_connect_timeout=5000 worker.intApp1.fail_on_status=302,500,503 worker.intApp1.recover_time=30 worker.intApp2.port=8009 worker.intApp2.host=10.15.8.9 worker.intApp2.type=ajp13 worker.intApp2.lbfactor=1 worker.intApp2.socket_timeout=30 worker.intApp2.socket_connect_timeout=5000 worker.intApp2.fail_on_status=302,500,503 worker.intApp2.recover_time=30 worker.LoadBalanceWorker.type=lb worker.LoadBalanceWorker.balanced_workers=intApp1,intApp2 worker.LoadBalanceWorker.sticky_session=1

  Read the article

• Anonymizing OpenVPN Allow SSH Access to Internal Server

  - by Lionel

  I'm using an anonymizing VPN, but want SSH access to internal computer. How do I access my internal computer through SSH? When I do ssh 98.123.45.6, the connection times out. IP address from cable provider: 98.123.45.6 Anonymous IP through VPN: 50.1.2.3 Internal computer: 192.168.1.123 When searching around, I found recommendations to either set up iptables rules, routing rules, or to add ListenAddress to sshd_config. Which of these applies to my case? Here is my route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.115.81.1 10.115.81.9 255.255.255.255 UGH 0 0 0 tun0 10.115.81.9 * 255.255.255.255 UH 0 0 0 tun0 50.1.2.3-sta ddwrt 255.255.255.255 UGH 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 202 0 0 eth0 169.254.0.0 * 255.255.0.0 U 204 0 0 vboxnet0 loopback * 255.0.0.0 U 0 0 0 lo default 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 128.0.0.0 10.115.81.9 128.0.0.0 UG 0 0 0 tun0 default ddwrt 0.0.0.0 UG 202 0 0 eth0

  Read the article

• Using iptables to make a VPN router

  - by lost_in_the_sauce

  I am attempting to make a VPN connection to a third party VPN site, then forward traffic from my internal computers (ssh and ping for now) out to the VPN site using IPTables. 3rd Party <- (tun0/eth0)Linux VPN Box(eth1) <- Windows7TestBox I am running on CentOS 6.3 Linux and have two network connections eth0-public eth1-private. I am running vpnc-0.5.3-4 which is currently connecting to my destination. When I connect I am able to ping the destination IPAddresses but that is as far as I can get. ping -I tun0 10.1.33.26 success ping -I eth0 10.1.33.26 fail ping -I eth1 10.1.33.26 fail I have my private network Windows 7 test box set up to have the eth1 (private) network of my VPN Server as its gateway and can ping him fine. I need IPTables to send the Windows 7 traffic out the VPN tunnel. I have tried for a few days many different IPTables configurations from this site and others, either the other examples are too simple or overly complicated. The only thing this server is doing is connecting to the VPN and forwarding all traffic. So we can "flush" everything and start from scratch here. It is a blank slate. #!/bin/bash echo "Define variables" ipt="/sbin/iptables" echo "Zero out all counters" $ipt -Z $ipt -t nat -Z $ipt -t mangle -Z echo "Flush all active rules, delete all chains" $ipt -F $ipt -X $ipt -t nat -F $ipt -t nat -X $ipt -t mangle -F $ipt -t mangle -X $ipt -P INPUT ACCEPT $ipt -P FORWARD ACCEPT $ipt -P OUTPUT ACCEPT $ipt -t nat -A POSTROUTING -o tun0 -j MASQUERADE $ipt -A FORWARD -i eth1 -o eth0 -j ACCEPT $ipt -A FORWARD -i eth0 -o eth1 -j ACCEPT $ipt -A FORWARD -i eth0 -o tun0 -j ACCEPT $ipt -A FORWARD -i tun0 -o eth0 -j ACCEPT Again I have done many variations of the above and many other rules from other posts but haven't been able to move forward. It seems like such a simple task, and yet....

  Read the article

• Renaming VLAN Interfaces in Linux

  - by rhololkeolke

  I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

  Read the article

• Need Help Customizing a Grammar Checking Replace Rule in Java

  - by user567785

  Hello, I am currently adding the Khmer (Cambodian) language to LanguageTool, an opensource grammar checker for OpenOffice (http://www.languagetool.org). I don't know enough Java to customize one of the scripts and wanted to make a request here asking if anyone would be willing to customize it for me (I can put link to your website at http://www.sbbic.org/lang/en-us/volunteer/ if you help). Here is the script that needs customization KhmerWordCoherencyRule.java: /* LanguageTool, a natural language style checker * Copyright (C) 2005 Daniel Naber (http://www.danielnaber.de) * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 * USA */ package de.danielnaber.languagetool.rules.km; import java.io.BufferedReader; import java.io.IOException; import java.io.InputStream; import java.io.InputStreamReader; import java.util.ArrayList; import java.util.HashMap; import java.util.List; import java.util.Locale; import java.util.Map; import java.util.ResourceBundle; import de.danielnaber.languagetool.AnalyzedSentence; import de.danielnaber.languagetool.AnalyzedToken; import de.danielnaber.languagetool.AnalyzedTokenReadings; import de.danielnaber.languagetool.JLanguageTool; import de.danielnaber.languagetool.tools.StringTools; import de.danielnaber.languagetool.rules.Category; import de.danielnaber.languagetool.rules.RuleMatch; /** * A Khmer rule that matches words or phrases which should not be used and suggests * correct ones instead. Loads the relevant words from * <code>rules/km/coherency.txt</code>, where km is a code of the language. * * @author Andriy Rysin */ public abstract class KhmerWordCoherencyRule extends KhmerRule { private static final String FILE_ENCODING = "utf-8"; private Map<String, String> wrongWords; // e.g. "????? -> "?????" private static final String FILE_NAME = "/km/coherency.txt"; public abstract String getFileName(); public String getEncoding() { return FILE_ENCODING; } /** * Indicates if the rule is case-sensitive. Default value is <code>true</code>. * @return true if the rule is case-sensitive, false otherwise. */ //in Khmer there is no case public boolean isCaseSensitive() { return false; } /** * @return the locale used for case conversion when {@link #isCaseSensitive()} is set to <code>false</code>. */ public Locale getLocale() { return Locale.getDefault(); } public KhmerWordCoherencyRule(final ResourceBundle messages) throws IOException { if (messages != null) { super.setCategory(new Category(messages.getString("category_misc"))); } wrongWords = loadWords(JLanguageTool.getDataBroker().getFromRulesDirAsStream(getFileName())); } public String getId() { return "KM_WORD_COHERENCY"; } public String getDescription() { return "Checks for wrong words/phrases"; } public String getSuggestion() { return " does not match your previous spelling of the word, use "; } public String getShort() { return "Use a consistant spelling throughout"; } public final RuleMatch[] match(final AnalyzedSentence text) { final List<RuleMatch> ruleMatches = new ArrayList<RuleMatch>(); final AnalyzedTokenReadings[] tokens = text.getTokensWithoutWhitespace(); for (int i = 1; i < tokens.length; i++) { final String token = tokens[i].getToken(); final String origToken = token; final String replacement = isCaseSensitive()?wrongWords.get(token):wrongWords.get(token.toLowerCase(getLocale())); if (replacement != null) { final String msg = token + getSuggestion() + replacement; final int pos = tokens[i].getStartPos(); final RuleMatch potentialRuleMatch = new RuleMatch(this, pos, pos + origToken.length(), msg, getShort()); if (!isCaseSensitive() && StringTools.startsWithUppercase(token)) { potentialRuleMatch.setSuggestedReplacement(StringTools.uppercaseFirstChar(replacement)); } else { potentialRuleMatch.setSuggestedReplacement(replacement); } ruleMatches.add(potentialRuleMatch); } } return toRuleMatchArray(ruleMatches); } private Map<String, String> loadWords(final InputStream file) throws IOException { final Map<String, String> map = new HashMap<String, String>(); InputStreamReader isr = null; BufferedReader br = null; try { isr = new InputStreamReader(file, getEncoding()); br = new BufferedReader(isr); String line; while ((line = br.readLine()) != null) { line = line.trim(); if (line.length() < 1) { continue; } if (line.charAt(0) == '#') { // ignore comments continue; } final String[] parts = line.split(";"); if (parts.length != 2) { throw new IOException("Format error in file " + JLanguageTool.getDataBroker().getFromRulesDirAsUrl(getFileName()) + ", line: " + line); } map.put(parts[0], parts[1]); } } finally { if (br != null) { br.close(); } if (isr != null) { isr.close(); } } return map; } public void reset() { } } Here is what I need the SimpleReplaceRule.java to do: 1 - Be able to have more than two spelling variations in the coherency.txt file (right now it can only be Word1;Word2). 2 - Find the first use of ANY of the spelling variations in a document that are found in coherency.txt and then make sure only that spelling is used throughout the document (ex. in the coherency.txt I have Word1;Word2;Word3 then in my document on the first line I write Word2. then on next line I write Word1 and Word 3 - then the grammar checker will flag Word1 and Word3 saying that I should use the spelling "Word2" instead...etc.). If anyone can help I would be grateful! Thanks for your time, Nathan

  Read the article

• CodePlex Daily Summary for Wednesday, February 17, 2010

  CodePlex Daily Summary for Wednesday, February 17, 2010New ProjectsAcademic Success Accounting System: The system is intended to use by school teacher to set marks to students and estimate their academic success and possibilities. The client applicat...Access.PowerTools: Access PowerTools is currently a sample MS Access add-in project to try & test features of Add-in Express™ 2009 for Microsoft® Office and .net (ht...AntoonCms: AntoonCms makes it easy to maintain a simple website with it's builtin administration pages. It's developed in C# on target Framework 2.0 The CMS...ASP.NET MVC Mehr Lib: Mehr Lib makes it easier for ASP.NET MVC developers to do develop projects. It's developed in C#. This version currently include Ajax master detail...BCryptTool: Developer tool that calculates BCrypt hash codes for strings. BCrypt is an implementation of the Blowfish cipher and a computationally-expensive ha...Coronasoft Cryostasis scripting engine: A scripting engine that allows you to dynamically load plugins from just about any supported .NET language. Its written in C#. Languages supported ...Critical Point Search: Critical Point Searchcritical points: critical pointsFont Family Name Retrieval: This library helps developer to retrieve the font family name from the TTF, OTF and TTC font files, so that developer can display the font without ...jQuery Form Input Hints Plugin: Automatically display hints on input textboxes in your forms using this jQuery plugin. I wrote this code to be as simple and as easy to use as pos...Kojax: kojax projectKronRetro: KronRetro! Making a Habbo Retro just got easier! Powered by PHP & MySQL you can make a Habbo Retro site fast!MVVM Wrapper Kit: MVVM Wrapper Kit makes it easier for View Model programmers to wrap their business objects and collections while preserving change notification and...ObjectCartographer: ObjectCartographer is an object to object mapper and object factory. It's developed in C#.PE-file Reader Writer API (PERWAPI): PERWAPI is a reader writer module for .NET program executables. It has been used as back-end for progamming language compilers such as Gardens Poi...Pinger: A simple Pinger, pings an address until you press a buttonQPV: 0.1: QPV aka Que pelicula es una aplicacion que consiste crear una base de datos potente de peliculas, criticas e informacion para poder filtrar pelicul...SIMD Detector: This SIMD class helps developers to detect the types of SIMD instruction available on users' processor. It supports Intel and AMD CPUs. It is writt...StackOverflow Test Project: Following Andrew Siemer's StackOverflow Knowledge Exchange Project.WeBlog: A blogging platform built on the MVC framework The project will showcase current technologies such as MVC 2, Silverlight 4 and jQuery 1.4. Data pro...Webmedia: this is my webmedia projectWindows Azure RSS Reader: This is and online RSS reader based on the Windows Azure platformWordEditor. A Word Editor for Windows, and an extended RichTextBox control.: This is a word editor that can be used as a stand alone word processor, or added to an existing project.Домашняя Бухгалтерия: Программа для ведения домашнего бухгалтерского учета финансов. New ReleasesAccess.PowerTools: Access PowerTools Add-In Community Edition v.0.0.1: Access PowerTools Add-In Community Edition v.0.0.1 is a sample MS Access add-in project to try & test Add-in Express™ 2009 for Microsoft® Office an...Active CSS: ActiveCSS-0.1.1: revision for version 0.1ASP.NET: Microsoft Ajax Minifier 4.0: The Microsoft Ajax Minifier enables you to improve the performance of your Ajax applications by reducing the size of your Cascading Style Sheet and...ASP.NET MVC Mehr Lib: V1.0: Mehr Lib V1.0 This version currently include ajax master detail combo facilities.ASP.net Ribbon: Version 1.2: New controls : Expandable gallery Color Picker Multi color File Menu Some JS modifications. Some CSS modifications. Includes some functionna...ASP.NET Web Forms Model-View-Presenter (MVP) Contrib: WebForms MVP Contrib CTP6: This is a release of the WebForms MVP Contrib project for WebForms MVP CTP6. Release includes: WebForms MVP Contrib framework Ninject IoC containerAwesomiumDotNet: AwesomiumDotNet 1.2.1: - Added Awesomium 1.5 features: URL filtering, header rewrite rules, SetOpensExternalLinksInCallingFrame. - Numerous fixes and improvements.BCryptTool: BCryptTool v0.1: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Buzz Dot Net: Buzz Dot Net v.1.10216: Features Parse Google Buzz feed to Objects Partial MVVM Implementation Partial OptimizationsCanvas VSDOC Intellisense: v1.0.0.0a: canvas-vsdoc.js and canvas-utils.js JavaScript intellisense for HTML5 Canvas element.CheckHeader: CheckHeader v0.8.5: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Claymore MVP: Claymore 1.0.2.0: Changelog Added ASP.NET WebForm support via ClaymoreHttpModule class. Added xsd schema for Visual Studio Intellisense within App.config and Web....Dam Gd - URL Shortner: Dam.gd Version 1.1: This is the latest instalment in our URL shortner. It uses The Easy API http://theeasyapi.com to access data that is used for the back-end analyti...D-AMPS: D-AMPS 0.9.1: Initial version.easySMS: easySMS 1.0 Source code: easySMS 1.0 Source codeFont Family Name Retrieval: 1st Release: Version 1.0.0Free Silverlight & WPF Chart Control - Visifire: Visifire Now Supports DataBinding: Hi, Today we are releasing the much awaited DataBinding feature in Visifire 3.0.3 beta 3. Now you can Bind any DataSource at the Series level so t...GenerateTypedBamApi: Version 2.0: Changes in this release: NEW: Export functionality no longer requires Excel to be installed (uses OLE DB vs. Excel Automation; also enables usage i...Gmail Notifier 2: GmailNotifier2 1.2.1: Fixes issues #9652, #9653iTuner - The iTunes Companion: iTuner 1.1.3699: This includes the first pass of the iTuner Librarian including management of dead tracks, duplicates, and empty directories... While I promised a ...jQuery Form Input Hints Plugin: jQuery.InputHints v1.0: jQuery.InputHints v1.0 Includes Standard & minified source Demo HTML file VS2008 SolutionLibWowArmory: LibWowArmory 0.2.3 beta: LibWowArmory 0.2.3 betaThis release of the LibWowArmory source code matches the WoW Armory as of version 3.3.2. Changes since version 0.2.2:Update...Managed Extensibility Framework: MEF Preview 9: We have merged the .net 3.5 and Silverlight 3 into a single zip. The bin folder contains the binaries for .net 3.5 whereas bin\SL contains the bina...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-1.3.3.0-6571.msi: February 16, 2010 * MdxDesigner: Fix for the issue where when an element is clicked, the mouse wheel stops working until the cursor leaves and r...MEFGeneric: MEFGeneric Preview 9: MEFGeneric Preview 9 release.Mesopotamia Experiment: Mesopotamia 1.2.26: Bug Fixes - mud map - progress window - recycle app domains on robotics engine crashes( in command prompt and visual, major work) - fixed rooomba h...Microsoft Solution Framework for Business Intelligence in Media: Release 1.0: This is the public release of the Microsoft Solution Framework for Business Intelligence in Media (Release 1.0).MVVM Wrapper Kit: MVVM Wrapper Beta: A simple test project is included to get you up and running, and wrapping those business objects.nBayes - Bayesian Filtering in C#: nBayes v0.2: nBayes' indexing system is factored in such a way that you can easily replace the index with a custom implementation. This release introduces an ad...NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.5: 3.6.0.5 16-February-2010 - Fix: SqlAzManSid Class. "Equals" matches object signiture instead of IAzManSid signiture. When a real null object is pas...ObjectCartographer: ObjectCartographer Code 1.0: This is the first release and contains code to help with object to object mapping (including mapping from one object to multiple objects), object f...Office Apps: 0.8.6: Bug fix's, added Calendar.OI - Open Internet: OI HTML and .XAP files (OI offline): this is the HTML code and the XAP file. please right-click the app at http://bit.ly/openinternet and select "install openinternet application to th...PE-file Reader Writer API (PERWAPI): PERWAPI-1.1.3: Perwapi version 1.1.3 is the complete distribution package. It contains Binary files, pdb files and xml files for the PERWAPI and SymbolRW compone...Pinger: Pinger 1.0.0.0 Binary: The Latest BinaryRNA Comparative Analysis Software Tools: RNA Comparative Analysis Software Tools 2.0: RNA Comparative Analysis Software Tools Version 2.0 Note: The RNA Comparative Analysis Software Tools are provided as is, without any warranty. No...SAL- Self Artificial Learning: Artificial Learning working proof of concept: This is a working proof of concept. It includes the Dev version (in .zip format) and the consumer version (in .exe format)SharePoint Management PowerShell scripts: SharePoint 2010 PowerShell Scripts: All the SharePoint 2010 PowerShell Scripts The first file is an Excel 2010 file allowing to find quiclky and easily the new cmdlets available wi...SIMD Detector: 1st Release: Version 1.3 Supports MMX/MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4a, SSE5, 3DNow.Terminals: Terminals 1.9 Beta Release: This is a beta release so the new features being added to terminals can be tested properly. The major change in this release is that Terminals has...Text Designer Outline Text Library: 9th minor release: Added the ability to select brush, such as gradient brush or texture brush for the text body. Added CSharp library, TextDesignerCSLibrary. Manage...VivoSocial: VivoSocial 7.0.2: This release has several updated modules. See the Support Forums for more details. Since we update modules very often, we will be changing how we d...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.6.00: changes CKEditor Upgrade to Version 3.2 SVN 5132 File Browser: After File Upload, File will be Auto Selected File Browser: Icons are corrected ...WordEditor. A Word Editor for Windows, and an extended RichTextBox control.: WordEditor Source Code: This contains the latest solution file, with all project files included.Домашняя Бухгалтерия: Alapha Realease: Принимаются ваши предложения по дизайну и функциональности программы.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesASP.NETLiveUpload to FacebookMost Active ProjectsDinnerNow.netRawrBlogEngine.NETSimple SavantNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelSharpyjQuery Library for SharePoint Web ServicesFluent Validation for .NET

  Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >