Search Results

Search found 5864 results on 235 pages for 'secure gateway'.

Page 215/235 | < Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >

  • web services access not being reached thru the web browser

    - by Tony
    I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

    Read the article

  • Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

    - by itchy355
    I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

    Read the article

  • Squid Proxy: url_regex acl is not working?

    - by bharathi
    I am using squid proxy 3.1 in ubuntu machine. I want to allow only urls matching our pattern through our proxy server. I configured acl like below. Acl for dstdomain is working fine. If i access any url besides .zmedia.com , I got proxy connection refused. But the url_regex is not working. What i am trying here is. Allow only request from ".zmedia.com" domain and the request url should be in "/blog" context. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 ::1 acl urlwhitelist url_regex -i ^http(s)://([a-zA-Z]+).zmedia.com/blog/.*$ acl allowdomain dstdomain .zmedia.com acl Safe_ports port 80 8080 8500 7272 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl SSL_ports port 7272 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager http_access deny !allowdomain http_access allow urlwhitelist http_access allow CONNECT SSL_ports http_access deny CONNECT !SSL_ports # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/spool/squid 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid append_domain .zmedia.com # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 Please correct me , If i did anything wrong?

    Read the article

  • VPN in Ubuntu fails every time

    - by fazpas
    I am trying to setup a vpn connection in Ubuntu 10.04 to use the service from relakks.com I used the network manager to add the vpn connection and the settings are: Gateway: pptp.relakks.com Username: user Password: pwd IPv4 Settings: Automatic (VPN) Advanced: MSCHAP & MSCHAPv2 checked Use point-to-point encryption (security:default) Allow BSD data compression checked Allow deflate data compression checked Use TCP header compression checked The connection always fail, here is the syslog: Jun 27 20:11:56 desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'... Jun 27 20:11:56 desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2064 Jun 27 20:11:56 desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections Jun 27 20:11:56 desktop NetworkManager: <info> VPN plugin state changed: 3 Jun 27 20:11:56 desktop NetworkManager: <info> VPN connection 'Relakks' (Connect) reply received. Jun 27 20:11:56 desktop pppd[2067]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Jun 27 20:11:56 desktop pppd[2067]: pppd 2.4.5 started by root, uid 0 Jun 27 20:11:56 desktop NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp1, iface: ppp1) Jun 27 20:11:56 desktop NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp1, iface: ppp1): no ifupdown configuration found. Jun 27 20:11:56 desktop pppd[2067]: Using interface ppp1 Jun 27 20:11:56 desktop pppd[2067]: Connect: ppp1 <--> /dev/pts/0 Jun 27 20:11:56 desktop pptp[2071]: nm-pptp-service-2064 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Jun 27 20:11:57 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. Jun 27 20:11:58 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1024). Jun 27 20:11:59 desktop kernel: [ 56.564074] Inbound IN=ppp0 OUT= MAC= SRC=93.182.139.2 DST=186.110.76.26 LEN=61 TOS=0x00 PREC=0x00 TTL=52 ID=40460 DF PROTO=47 Jun 27 20:11:59 desktop kernel: [ 56.944054] Inbound IN=ppp0 OUT= MAC= SRC=93.182.139.2 DST=186.110.76.26 LEN=60 TOS=0x00 PREC=0x00 TTL=52 ID=40461 DF PROTO=47 Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown) Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request' Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed Jun 27 20:11:59 desktop pptp[2079]: nm-pptp-service-2064 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state) Jun 27 20:11:59 desktop pppd[2067]: Modem hangup Jun 27 20:11:59 desktop pppd[2067]: Connection terminated. Jun 27 20:11:59 desktop NetworkManager: <info> VPN plugin failed: 1 Jun 27 20:11:59 desktop NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp1, iface: ppp1) Jun 27 20:11:59 desktop pppd[2067]: Exit. Does someone can identify something in the syslog? I've been googling and reading about pptp but couldn't find anything about the error "read returned zero, peer has closed"

    Read the article

  • bind9 DNS Ubuntu names pingible on server, but not on Windows Machines?

    - by leeand00
    I setup a DNS server today on Ubuntu, following this tutorial. My intent was to setup my network for dns-name resolving on the private LAN within a single zone (nothing fancy I just want name resolution). I've tested the setup on the DNS server machine itself, and I can ping all the machines listed in the configuration file. I've also configured the Windows Machines on my network, and for some reason they are incapable of pinging by names as was possible on the DNS Server itself. I've tried running nslookup on the Windows DNS clients and I receive and error mentioning the address of the DNS server. DNS forwarding works fine, I'm not having any trouble accessing the internet, the problem only lies within accessing names within the private LAN. Here are my configuration files: options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { 8.8.8.8; 8.8.8.4; 74.242.0.12; //68.87.76.178; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.options zone "leerdomain.local" { type master; file "/etc/bind/zones/leerdomain.local.db"; notify no; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.2.168.192.in-addr.arpa"; notify no; }; /etc/bind/named.conf.local Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 2010011001 28800 3600 604800 38400 ); leerdomain.local. IN NS ns.leerdomain.local. ns IN A 192.168.2.9 asus IN A 192.168.2.254 www IN CNAME asus vaio IN A 192.168.2.253 iptouch IN A 192.168.2.252 toshiba IN A 192.168.2.251 gw IN A 192.168.2.1 TXT "Network Gateway" /etc/bind/zones/leerdomain.local.db (Validates fine with named-checkzone when validating zone leerdomain.local) Reverse Lookup: $TTL 3D @ IN SOA ns.leerdomain.local. admin.leerdomain.local. ( 201001101 28800 604800 604800 86400 ) IN NS ns.leerdomain.local. 1 IN PTR gw.leerdomain.local. 254 IN PTR asus.leerdomain.local. 253 IN PTR vaio.leerdomain.local. 252 IN PTR iptouch.leerdomain.local. 251 IN PTR toshiba.leerdomain.local. /etc/bind/zones/rev.2.168.192.in-addr.arpa *(Does not validate with named-checkzone when validating zone leerdomain.local gives an error of: zone leerdomain.local/IN: NS 'ns.leerdomain.local' has no address records (A or AAAA) zone leerdomain.local/IN: not loaded due to errors. * Despite not validating bind9 starts without errors in /var/log/syslog I've also configured a few of the windows machines on my network to have the static ip as specified in the lookup and reverse lookup config files. i.e. Using nslookup yields the following results: C:\Users\leeand00>nslookup ns Server: UnKnown Address: 192.168.2.9 *** UnKnown can't find ns: Non-existent domain C:\Users\leeand00>nslookup gw Server: UnKnown Address: 192.168.2.9 Name: gw. Additionally trying to ping by name also fails on machines that are not the DNS Server. Is there something wrong with my configuration of either the nameserver or the Windows Boxes that is keeping me from accessing other machines using names?

    Read the article

  • Single-Signon options for Exchange 2010

    - by freiheit
    We're working on a project to migrate employee email from Unix/open-source (courier IMAP, exim, squirrelmail, etc) to Exchange 2010, and trying to figure out options for single-signon for Outlook Web Access. So far all the options I've found are very ugly and "unsupportable", and may simply not work with Forefront. We already have JA-SIG CAS for token-based single-signon and Shibboleth for SAML. Users are directed to a simple in-house portal (a Perl CGI, really) that they use to sign in to most stuff. We have an HA OpenLDAP cluster that's already synchronized against another AD domain and will be synchronized with the AD domain Exchange will be using. CAS authenticates against LDAP. The portal authenticates against CAS. Shibboleth authenticates with CAS but pulls additional data from LDAP. We're moving in the direction of having web services authenticate against CAS or Shibboleth. (Students are already on SAML/Shibboleth authenticated Google Apps for Education) With Squirrelmail we have a horrible hack linked to from that portal page that authenticates against CAS, gets your original plaintext password (yes, I know, evil), and gives you an HTTP form pre-filled with all the necessary squirrelmail login details with javaScript onLoad stuff to immediately submit the form. Trying to find out exactly what is possible with Exchange/OWA seems to be difficult. "CAS" is both the acronym for our single-signon server and an Exchange component. From what I've been able to tell there's an addon for Exchange that does SAML, but only for federating things like free/busy calendar info, not authenticating users. Plus it costs additional money so there's no way to experiment with it to see if it can be coaxed into doing what we want. Our plans for the Exchange cluster involve Forefront Threat Management Gateway (the new ISA) in the DMZ front-ending the CAS servers. So, the real question: Has anybody managed to make Exchange authenticate with CAS (token-based single-signon) or SAML, or with something I can reasonably likely make authenticate with one of those (such as anything that will accept apache's authentication)? With Forefront? Failing that, anybody have some tips on convincing OWA Forms Based Authentication (FBA) into letting us somehow "pre-login" the user? (log in as them and pass back cookies to the user, or giving the user a pre-filled form that autosubmits like we do with squirrelmail). This is the least-favorite option for a number of reasons, but it would (just barely) satisfy our requirements. From what I hear from the guy implementing Forefront, we may have to set OWA to basic authentication and do forms in Forefront for authentication, so it's possible this isn't even possible. I did find CasOwa, but it only mentions Exchange 2007, looks kinda scary, and as near as I can tell is mostly the same OWA FBA hack I was considering slightly more integrated with the CAS server. It also didn't look like many people had had much success with it. And it may not work with Forefront. There's also "CASifying Outlook Web Access 2", but that one scares me, too, and involves setting up a complex proxy config, which seems more likely to break. And, again, doesn't look like it would work with Forefront. Am I missing something with Exchange SAML (OWA Federated whatchamacallit) where it is possible to configure to do user authentication and not just free/busy access authorization?

    Read the article

  • Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

    - by Stilez
    (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

    Read the article

  • Authenticate by libpam-mysql and libnss-mysql (CentOS)

    - by Chris
    I'm trying to get MySQL to function as a backend for authenticating users on CentOS 6.3. So far I have successfully installed and configured libnss-mysql. I can test this by doing: # groups testuser testuser : sftp Testuser is a member of the sftp group in fact, all MySQL based useraccounts will be hardcoded to it. The sftp group is chrooted and forced to use internal-sftp so they cannot do anything but access their home directory. Then I configured pam-mysql and PAM to allow mysql logins. This also works.. When SELinux is not enforcing. When I do setenforce 1 users can no longer login. Error: Permission denied, please try again. This is my pam_mysql.conf file: users.host=localhost users.db_user=nss-pam-user users.db_passwd=*********** users.database=sftpusers users.table=users users.user_column=username users.password_column=password users.password_crypt=6 verbose=1 My /etc/pam.d/sshd: #%PAM-1.0 auth sufficient pam_sepermit.so auth include password-auth auth required pam_mysql.so config_file=/etc/pam_mysql.conf account sufficient pam_nologin.so account include password-auth account required pam_mysql.so config_file=/etc/pam_mysql.conf password include password-auth # pam_selinux.so close should be the first session rule session required pam_selinux.so close session required pam_loginuid.so # pam_selinux.so open should only be followed by sessions to be executed in the user context session required pam_selinux.so open env_params session optional pam_keyinit.so force revoke session include password-auth And to be complete the contents of some log files.. /var/logs/secure Nov 20 14:52:20 hostname unix_chkpwd[4891]: check pass; user unknown Nov 20 14:52:20 hostname unix_chkpwd[4891]: password check failed for user (testuser) Nov 20 14:52:20 hostname sshd[4880]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.10.107 user=testuser Nov 20 14:52:22 sftpusers sshd[4880]: Failed password for testuser from 192.168.10.107 port 51849 ssh2 /var/logs/audit/audit.log type=USER_AUTH msg=audit(1353420107.070:812): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=pubkey acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.312:813): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=PAM:authentication acct="testuser" exe="/usr/sbin/sshd" hostname=192.168.10.107 addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.456:814): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=password acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' I tried to let audit2why explain the problem but it remains silent even though there are some errors. Does anyone see the problem? Thanks! EDIT: Turns out it's almost working with setenforce 0 I can mkdir foobar but if I do a single ls I get an error: Received message too long 16777216

    Read the article

  • Have to dhclient each restart to access internet

    - by Zeophlite
    So each time I restart my ubuntu server (virtual 10.04, via Xencenter), I have to call dhclient before I can access the internet: http://img813.imageshack.us/i/dhclient.png/ What do I need to change to get internet access automatically? Apologies for posting images, I'm using Xencenter, so I can't copy/paste the console output EDIT:: daniel@workwork:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.69.136 netmask 255.255.255.0 network 192.168.69.0 broadcast 192.168.69.255 gateway 192.168.69.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.69.120 dns-search workwork.com.au daniel@workwork:~$ ifconfig eth0 Link encap:Ethernet HWaddr ae:11:14:22:0a:03 inet6 addr: fe80::ac11:14ff:fe22:a03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10496 (10.4 KB) TX bytes:13086 (13.0 KB) Interrupt:32 Base address:0x6000 eth1 Link encap:Ethernet HWaddr b2:2c:40:f2:a0:fa inet addr:192.168.69.167 Bcast:192.168.69.255 Mask:255.255.255.0 inet6 addr: fe80::b02c:40ff:fef2:a0fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13448 errors:0 dropped:0 overruns:0 frame:0 TX packets:3100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7679428 (7.6 MB) TX bytes:282286 (282.2 KB) Interrupt:36 Base address:0xa100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:179 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36905 (36.9 KB) TX bytes:36905 (36.9 KB) daniel@workwork:/var/lib/dhcp3$ cat dhclient.leases lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 07:36:53; rebind 5 2011/03/18 11:35:39; expire 5 2011/03/18 12:35:39; } lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 08:51:58; rebind 5 2011/03/18 12:24:16; expire 5 2011/03/18 13:24:16; } daniel@workwork:/var/lib/dhcp3$ cat dhclient.eth0.leases daniel@workwork:/var/lib/dhcp3$ ifconfig eth1 before and after dhclient http://img692.imageshack.us/i/prepost.png/

    Read the article

  • what's wrong with my Ubuntu 11.10 bind9 configuration?

    - by John Bowlinger
    I've followed several tutorials on installing your own nameservers and I'm pretty much at my wit's end, because I cannot get them to resolve. Note, the actual domain and ip address has been changed for privacy to example.com and 192.168.0.1. My named.conf.local file: zone "example.com" { type master; file "/var/cache/bind/example.com.db"; }; zone "0.168.192.in_addr.arpa" { type master; file "/var/cache/bind/192.168.0.db"; }; My named.conf.options file: options { forwarders { 192.168.0.1; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; My resolv.conf file: search example.com. nameserver 192.168.0.1 My Forward DNS file: ORIGIN example.com. $TTL 86400 @ IN SOA ns1.example.com. root.example.com. ( 2012083101 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 3600 ) ; Negative Cache TTL example.com. NS ns1.example.com. example.com. NS ns2.example.com. example.com. MX 10 mail.example.com. @ IN A 192.168.0.1 ns1.example.com IN A 192.168.0.1 ns2.example.com IN A 192.168.0.2 mail IN A 192.168.0.1 server1 IN A 192.168.0.1 gateway IN CNAME ns1.example.com. headoffice IN CNAME server1.example.com. smtp IN CNAME mail.example.com. pop IN CNAME mail.example.com. imap IN CNAME mail.example.com. www IN CNAME server1.example.com. sql IN CNAME server1.example.com. And my reverse DNS: $ORIGIN 0.168.192.in-addr.arpa. $TTL 86400 @ IN SOA ns1.example.com. root.example.com. ( 2009013101 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 3600 ) ; Negative Cache TTL 1 PTR mail.example.com. 1 PTR server1.example.com. 2 PTR ns1.example.com. Yet, when I restart bind9 and do: host ns1.example.com localhost I get: Using domain server: Name: localhost Address: 127.0.0.1#53 Aliases: Host ns1.example.com.example.com not found: 2(SERVFAIL) Similarly, for: host 192.168.0.1 localhost I get: ;; connection timed out; no servers could be reached Anybody know what's going on? Btw, my domain name "www.example.com" that I've used in this question is being forwarded to my ISP's nameservers. Would that affect my bind9 configuration? I want to learn how to do set up nameservers on my own for learning, so that is why I'm going through all this trouble.

    Read the article

  • Windows cannot find the host name "download.microsoft.com" using DNS

    - by joedotnot
    When trying to download a file found on the Microsoft downloads center that starts with, for example, http://download.microsoft.com/download/6/8/7/(some_GUID)/(some_file_name.ext) i get a timeout with "Internet Explorer cannot display the webpage". More information says: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. Diagnose Connection problems says: Windows cannot find the host name "download.microsoft.com" using DNS Bear with me while i expand on the problem: It all started when i tried to download Windows XP mode for my Windows 7 machine. I went to the virtual PC site, then thru the motions of Windows Genuine Advantage which validated ok, but when it redirects to grab the file just times out with above error. (NB: i also tried with the latest Chrome and Firefox but no use due to the Genuine Advantage stuff, so i decided to stick with IE). I am behind an ADSL2+ modem router connecting via wireless (Win 7 Pro laptop); so i hop over to the desktop connected via ethernet (Vista Business), and same result; begin to think site download.microsoft.com site is down. So i give it a break an read up on EDNS, flushing the cache, hosts file, etc... Try again an hour later on the Win 7 machine, still no go; so i turn off the Win 7 (software) firewall, and lo and behold, i can connect and grab any files from download.microsoft.com; (...nice, so we have a Micro$0ft firewall preventing access to a Micro$0ft website, no wonder my auto-updates kept failing but that's another story). But i still am not happy that the desktop connected via ethernet still cannot get to download.microsoft.com, even though i turned off all firewalls, defenders, anti-virus, etc. What is so special / specific about the url download.microsoft.com, any other site is ok, including www.microsoft.com. Any networking guru know what's REALLY going on, and how can i get the desktop to connect? Ping download.microsoft.com - Ping request could not find host download.microsoft.com. Please check the name and try again. Ping google.com or even www.microsoft.com works gives me an IP address. NB: On the wireless laptop ping download.microsoft.com works, i get xxxx.ms.akamai.net [202.7.177.33].

    Read the article

  • Outlook 2007 Does Not Accept Login Credentials, OWA Webmail Does. Troubleshooting Advice?

    - by Chris
    I am trying to connect Outlook 2007 to Exchange (Hosted Exchange from Rackspace). Soon, I will need to roll this out for our entire office. With the Exchange account added to Outlook, Outlook starts up and asks for the user's username and password. Unfortunately, it doesn't like the password I use for it. I can confirm this username (email address) and password combo works by using Outlook WebMail, and another user (in another network/office) confirmed the Exchange account does work within his Outlook client. In my network/office, I can confirm that an Outlook 2007 client (under Windows 7) can connect to the Hosted Exchange server from Rackspace. However, I have not been able to get Outlook 2007 (under Windows XP SP3) to connect to the very same Exchange server Outlook 2007 (under Windows 7) can connect to. Outlook continuously prompts me for the username and password and does not accept the correct combination. Now, regarding the Outlook client that cannot connect/login to Exchange: The user has full admin rights on the workstation We do not run a domain controller/LDAP The firewall on the workstation has been disabled Real time file scanning in Microsoft Security Essentials has been disabled There are no virus scanning applications that would interface with Outlook or an email server. The Exchange account is setup to run on a newly created Outlook profile The network firewall does not log any blocked attempts A packet capture at the router reveals communication between the workstation and the Exchange server or proxy (though, this is SSL encrypted, so I don't know what the computers are saying) I have applied a fix (Added DWORD value of 0 for DefConnectOpts under HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC) that was recommended to make RPC function when the workstation does not have a default gateway set. Workstation is configured as DHCP. This fix did nothing, and it may be worth noting the RPC subkey was not present until I added it. RPC service is running on the workstation The program is not running under any compatibility mode. Side note: Outlook 2007 installs with compatibility mode for XP enabled by default in windows 7. Outlook 2007 will not even try to connect to exchange if this compatibility mode is checked. In windows xp, I tried checking compatibility mode for windows 2000, and was unable to connect to exchange as well. Here is the specific configuration I've used in a blank outlook profile: Microsoft Exchange Server: ##MASKED##-MBX-C18.mex07a.mlsrvr.com Username: (Full Email Address: [email protected]) Password: ##MASKED## Outlook Anywhere: Connect to Microsoft Exchange using HTTP Exchange Proxy Settings: Proxy Server: mex07a.emailsrvr.com Check "Connect using SSL only" Under "Only connect to proxy servers...", enter: msstd:mex07a.emailsrvr.com Check "On fast networks, connect using HTTP first, then connect using TCP/IP" Check "On slow networks, connect using HTTP first, then connect using TCP/IP" Proxy authentication settings: Basic Authentication Notes: mex07a.mlsrvr.com and mex07a.emailsrvr.com may look incorrect at first glance, but this is not a typo - these instructions were handed down from rackspace and are confirmed to be working, just not on this workstation. I have tried to use the RpcPing utility but must have been using it wrong. I got as far as "Bad Interface Descriptor". It would seem to me getting Outlook and Exchange to work together would be a breeze, especially since everything is done over port 80 with web services. Unfortunately, the user is stuck with WebMail access only, because Outlook won't accept the Exchange credentials. Do you have any ideas of other things I could try to debug this issue further? Any and all help is greatly appreciated. Thank you! -Chris

    Read the article

  • udp through nat

    - by youllknow
    Hi everyone! I've two private networks (each of them behind a typical dsl router). The routers are connected to the WWW. The extern interface of each router have one dynamic IP address. I want to stream data via UDP directly between one client in private network A and one client in private network B. I've already tried a lot of things (see: http://en.wikipedia.org/wiki/UDP_hole_punching, or STUN). But it wasn't possible for me to transfer data between the two clients. It's possible to use a server (located in the WWW, with static IP) to transfer the extern IPs (and extern ports) from the routers between the clients. So imagine client A knows client B's external IP and client B's external port assigned by his router. I simply tried sending UDP packet to the receivers external IP/port combination, but without any result. So does anyone know what do to communicate via UDP throw the two NAT routers? It must be possible??? Or does Skype, for example, not directly communicate between the clients when the call eachother (voice over ip). I am sorry for my bad English! If something is confusing don't mind asking me!!! Thanks for your help in advance. ::::EDIT:::: I can't get pwnat or chownat working. I tried it with my own dsl-gateway - didn't work. Then I set up a complete virtual environment using VMWare. C1 (Client 1, WinXP Prof SP3): 172.16.16.100/24, GW 172.16.16.1 C2 (Client 2, WinXP Prof SP3): 10.0.0.100/24, GW 10.0.0.1 C3 (Client 3, WinXP Prof SP3): 3.0.0.2/24, GW 3.0.0.1 S1 (Ubuntu 10.04 x64 Server): eth0: 172.16.16.1/24, eth1: 1.0.0.2/24 GW 1.0.0.1 S2 (Ubuntu 10.04 x64 Server): eth0: 10.0.0.1/24, eth1: 2.0.0.2/24 GW 2.0.0.1 S3 (Ubuntu 10.04 x64 Server): eth0: 1.0.0.1/24, eth1: 2.0.0.1/24, eth2: 3.0.0.1/24 +--+ +--+ +--+ +--+ +--+ |C1|-----|S1|-----|S3|-----|S2|-----|C2| +--+ +--+ +--+ +--+ +--+ | +--+ |C3| +--+ Server S1 and S2 provide NAT functionality. (they have routing enabled and provide a firewall, which allows trafic from the internal net and provide the nat functionality) Server S3 has routing enabled. The client firewalls are turned off. C1 and C2 are able to ping C3, e.g. visit C3's webserver. They are also able to send UDP Packets to C3 (C3 successful receives them)! C1 and C2 have also webservers running for test reasons. I run ""chownat -s 80 2.0.0.2"" at C1, and ""chownat -c 8000 1.0.0.2"" at C2. Then I tried to access the Webpage from C1 via webbrower localhost at port 8000. It didn't work. Can anybody help me? Any suggestions? If you have any questions to my question, please ask!

    Read the article

  • Bonding: works only for download

    - by Crazy_Bash
    I would like to install bonding with 4 links with mode 4. but only "download/receiving" works with bondig. for transmitting the system chooses one link. ifconfig bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 inet addr:ip Bcast:ip Mask:255.255.255.248 inet6 addr: fe80::92e2:baff:fe0f:76b4/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:239187413 errors:0 dropped:10944 overruns:0 frame:0 TX packets:536902370 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14688536197 (13.6 GiB) TX bytes:799521192901 (744.6 GiB) eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:54969488 errors:0 dropped:0 overruns:0 frame:0 TX packets:2537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3374778591 (3.1 GiB) TX bytes:314290 (306.9 KiB) eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:64935805 errors:0 dropped:1 overruns:0 frame:0 TX packets:2532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3993499746 (3.7 GiB) TX bytes:313968 (306.6 KiB) eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:57352105 errors:0 dropped:2 overruns:0 frame:0 TX packets:536894778 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3524236530 (3.2 GiB) TX bytes:799520265627 (744.6 GiB) eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:61930025 errors:0 dropped:3 overruns:0 frame:0 TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3796021948 (3.5 GiB) TX bytes:314274 (306.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5320 (5.1 KiB) TX bytes:5320 (5.1 KiB) those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 4 Actor Key: 17 Partner Key: 11 Partner Mac Address: 00:24:51:12:63:00 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b4 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b5 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b6 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b7 Aggregator ID: 1 Slave queue ID: 0 /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 mode 6

    Read the article

  • Mod_rewrite with UTF-8 accent, multiviews , .htaccess

    - by GuruJR
    Problem: with Mod_rewrite, multiview & Apache config Introduction: The website is in french and i had problem with unicode encoding and mod_rewrite within php wihtout multiviews Old server was not handling utf8 correctly (somewhere between PHP, apache mod rewrite or mysql) Updated Server to Ubuntu 11.04 , the process was destructive lost all files in var/www/ (the site was mainly 2 files index.php & static.php) lost the site specific .Htaccess file lost MySQL dbs lost old apache.conf What i have done so far: What works: Setup GNutls for SSL, Listen 443 = port.conf Created 2 Vhosts in one file for :80 and :443 = website.conf Enforce SSL = Redirecting :80 to :443 with a mod_rewrite redirect Tried to set utf-8 everywhere.. Set charset and collation , db connection , mb_settings , names utf-8 and utf8_unicode_ci, everywhere (php,mysql,apache) to be sure to serve files as UTF-8 i enabled multiview renamed index.php.utf8.fr and static.php.utf8.fr With multiview enabled, Multibytes Accents in URL works SSL TLS 1.0 What dont work: With multiview enabled , mod_rewrite works for only one of my rewriterules With multiview Disabled, i loose access to the document root as "Forbidden" With multiview Disabled, i loose Multibytes (single charater accent) The Apache Default server is full of settings. (what can i safely remove ?) these are my configuration files so far :80 Vhost file (this one work you can use this to force redirect to https) RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} LanguagePriority fr :443 Vhost file (GnuTls is working) DocumentRoot /var/www/x ServerName example.com ServerAlias www.example.com <Directory "/var/www/x"> allow from all Options FollowSymLinks +MultiViews AddLanguage fr .fr AddCharset UTF-8 .utf8 LanguagePriority fr </Directory> GnuTLSEnable on GnuTLSPriorities SECURE:+VERS-TLS1.1:+AES-256-CBC:+RSA:+SHA1:+COMP-NULL GnuTLSCertificateFile /path/to/certificate.crt GnuTLSKeyFile /path/to/certificate.key <Directory "/var/www/x/base"> </Directory> Basic .htaccess file AddDefaultCharset utf-8 Options FollowSymLinks +MultiViews RewriteEngine on RewriteRule ^api/$ /index.php.utf8.fr?v=4 [L,NC,R] RewriteRule ^contrib/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^coop/$ /index.php.utf8.fr?v=3 [L,NC,R] RewriteRule ^crowd/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^([^/]*)/([^/]*)$ /static.php.utf8.fr?VALUEONE=$2&VALUETWO=$1 [L] So my quesiton is whats wrong , what do i have missing is there extra settings that i need to kill from the apache default . in order to be sure all parts are using utf-8 at all time, and that my mod_rewrite rules work with accent Thank you all in advance for your help, I will follow this question closely , to add any needed information.

    Read the article

  • Web application/ site service (like Google App Engine) for PHP/ MySQL and Postgres

    - by Simon
    I would like to find a service similar to Google App Engine for PHP/ MySQL/ Postgres sites/ applications. We host two different types of site. i). PHP/ Mysql/ Zend Framework <VirtualHost *:80> DocumentRoot "/home/websites/website.com/public" ServerName website.com # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory "/home/websites/website.com/public"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] </Directory> </VirtualHost> ii). Matrix CMS - PHP/ Postgres + loads of pear classes <VirtualHost *:80> ServerName server.example.com DocumentRoot /home/websites/mysource_matrix/core/web Options -Indexes FollowSymLinks <Directory /home/websites/mysource_matrix> Order deny,allow Deny from all </Directory> <DirectoryMatch "^/home/websites/mysource_matrix/(core/(web|lib)|data/public|fudge)"> Order allow,deny Allow from all </DirectoryMatch> <DirectoryMatch "^/home/websites/mysource_matrix/data/public/assets"> php_flag engine off </DirectoryMatch> <FilesMatch "\.inc$"> Order allow,deny Deny from all </FilesMatch> <LocationMatch "/(CVS|\.FFV)/"> Order allow,deny Deny from all </LocationMatch> Alias /__fudge /home/websites/mysource_matrix/fudge Alias /__data /home/websites/mysource_matrix/data/public Alias /__lib /home/websites/mysource_matrix/core/lib Alias / /home/websites/mysource_matrix/core/web/index.php/ </VirtualHost> My key requirements are: I don't want to worry/ know/ care about the server/ infrastructure Secure/ up to date software/ os Good monitoring Automatic scalability SLA I apologise for the length of the question. In short all I want to do is i). create vhost, ii). create db iii). install app/ site iv). relax. Thanks. Edit: I include the Matrix vhost because that is the only complication that I cannot really do via a .htaccess file.

    Read the article

  • PCI-DSS compliance for business with only swipe terminals [migrated]

    - by rowatt
    I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

    Read the article

  • Cisco Pix how to add an additional block of static ip addresses for nat?

    - by Scott Szretter
    I have a pix 501 with 5 static ip addresses. My isp just gave me 5 more. I am trying to figure out how to add the new block and then how to nat/open at least one of them to an inside machine. So far, I named a new interface "intf2", ip range is 71.11.11.58 - 62 (gateway should 71.11.11.57) imgsvr is the machine I want to nat to one of the (71.11.11.59) new ip addresses. mail (.123) is an example of a machine that is mapped to the current existing 5 ip block (96.11.11.121 gate / 96.11.11.122-127) and working fine. Building configuration... : Saved : PIX Version 6.3(4) interface ethernet0 auto interface ethernet0 vlan1 logical interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif vlan1 intf2 security1 enable password xxxxxxxxx encrypted passwd xxxxxxxxx encrypted hostname xxxxxxxPIX domain-name xxxxxxxxxxx no fixup protocol dns fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names ...snip... name 192.168.10.13 mail name 192.168.10.29 imgsvr object-group network vpn1 network-object mail 255.255.255.255 access-list outside_access_in permit tcp any host 96.11.11.124 eq www access-list outside_access_in permit tcp any host 96.11.11.124 eq https access-list outside_access_in permit tcp any host 96.11.11.124 eq 3389 access-list outside_access_in permit tcp any host 96.11.11.123 eq https access-list outside_access_in permit tcp any host 96.11.11.123 eq www access-list outside_access_in permit tcp any host 96.11.11.125 eq smtp access-list outside_access_in permit tcp any host 96.11.11.125 eq https access-list outside_access_in permit tcp any host 96.11.11.125 eq 10443 access-list outside_access_in permit tcp any host 96.11.11.126 eq smtp access-list outside_access_in permit tcp any host 96.11.11.126 eq https access-list outside_access_in permit tcp any host 96.11.11.126 eq 10443 access-list outside_access_in deny ip any any access-list inside_nat0_outbound permit ip 192.168.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.17.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.16.0.0 255.255.0.0 IPPool2 255.255.255.0 ...snip... access-list inside_access_in deny tcp any any eq smtp access-list inside_access_in permit ip any any pager lines 24 logging on logging buffered notifications mtu outside 1500 mtu inside 1500 ip address outside 96.11.11.122 255.255.255.248 ip address inside 192.168.10.15 255.255.255.0 ip address intf2 71.11.11.58 255.255.255.248 ip audit info action alarm ip audit attack action alarm pdm location exchange 255.255.255.255 inside pdm location mail 255.255.255.255 inside pdm location IPPool2 255.255.255.0 outside pdm location 96.11.11.122 255.255.255.255 inside pdm location 192.168.10.1 255.255.255.255 inside pdm location 192.168.10.6 255.255.255.255 inside pdm location mail-gate1 255.255.255.255 inside pdm location mail-gate2 255.255.255.255 inside pdm location imgsvr 255.255.255.255 inside pdm location 71.11.11.59 255.255.255.255 intf2 pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 96.11.11.123 global (intf2) 3 interface global (intf2) 4 71.11.11.59 nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 mail 255.255.255.255 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 96.11.11.123 smtp mail smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 https mail https netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 www mail www netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.124 ts netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.126 mail-gate2 netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.125 mail-gate1 netmask 255.255.255.255 0 0 access-group outside_access_in in interface outside access-group inside_access_in in interface inside route outside 0.0.0.0 0.0.0.0 96.11.11.121 1 route intf2 0.0.0.0 0.0.0.0 71.11.11.57 2 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute floodguard enable ...snip... : end [OK] Thanks!

    Read the article

  • iptables - quick safety eval & limit max conns over time

    - by Peter Hanneman
    Working on locking down a *nix server box with some fancy iptable(v1.4.4) rules. I'm approaching the matter with a "paranoid, everyone's out to get me" style, not necessarily because I expect the box to be a hacker magnet but rather just for the sake of learning iptables and *nix security more throughly. Everything is well commented - so if anyone sees something I missed please let me know! The *nat table's "--to-ports" point to the only ports with actively listening services. (aside from pings) Layer 2 apps listen exclusively on chmod'ed sockets bridged by one of the layer 1 daemons. Layers 3+ inherit from layer 2 in a similar fashion. The two lines giving me grief are commented out at the very bottom of the *filter rules. The first line runs fine but it's all or nothing. :) Many thanks, Peter H. *nat #Flush previous rules, chains and counters for the 'nat' table -F -X -Z #Redirect traffic to alternate internal ports -I PREROUTING --src 0/0 -p tcp --dport 80 -j REDIRECT --to-ports 8080 -I PREROUTING --src 0/0 -p tcp --dport 443 -j REDIRECT --to-ports 8443 -I PREROUTING --src 0/0 -p udp --dport 53 -j REDIRECT --to-ports 8053 -I PREROUTING --src 0/0 -p tcp --dport 9022 -j REDIRECT --to-ports 8022 COMMIT *filter #Flush previous settings, chains and counters for the 'filter' table -F -X -Z #Set default behavior for all connections and protocols -P INPUT DROP -P OUTPUT DROP -A FORWARD -j DROP #Only accept loopback traffic originating from the local NIC -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j DROP #Accept all outgoing non-fragmented traffic having a valid state -A OUTPUT ! -f -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT #Drop fragmented incoming packets (Not always malicious - acceptable for use now) -A INPUT -f -j DROP #Allow ping requests rate limited to one per second (burst ensures reliable results for high latency connections) -A INPUT -p icmp --icmp-type 8 -m limit --limit 1/sec --limit-burst 2 -j ACCEPT #Declaration of custom chains -N INSPECT_TCP_FLAGS -N INSPECT_STATE -N INSPECT #Drop incoming tcp connections with invalid tcp-flags -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL ALL -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL NONE -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ACK,FIN FIN -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ACK,PSH PSH -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ACK,URG URG -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL FIN,PSH,URG -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags FIN,RST FIN,RST -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags SYN,RST SYN,RST -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL SYN,FIN,PSH,URG -j DROP -A INSPECT_TCP_FLAGS -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP #Accept incoming traffic having either an established or related state -A INSPECT_STATE -m state --state ESTABLISHED,RELATED -j ACCEPT #Drop new incoming tcp connections if they aren't SYN packets -A INSPECT_STATE -m state --state NEW -p tcp ! --syn -j DROP #Drop incoming traffic with invalid states -A INSPECT_STATE -m state --state INVALID -j DROP #INSPECT chain definition -A INSPECT -p tcp -j INSPECT_TCP_FLAGS -A INSPECT -j INSPECT_STATE #Route incoming traffic through the INSPECT chain -A INPUT -j INSPECT #Accept redirected HTTP traffic via HA reverse proxy -A INPUT -p tcp --dport 8080 -j ACCEPT #Accept redirected HTTPS traffic via STUNNEL SSH gateway (As well as tunneled HTTPS traffic destine for other services) -A INPUT -p tcp --dport 8443 -j ACCEPT #Accept redirected DNS traffic for NSD authoritative nameserver -A INPUT -p udp --dport 8053 -j ACCEPT #Accept redirected SSH traffic for OpenSSH server #Temp solution: -A INPUT -p tcp --dport 8022 -j ACCEPT #Ideal solution: #Limit new ssh connections to max 10 per 10 minutes while allowing an "unlimited" (or better reasonably limited?) number of established connections. #-A INPUT -p tcp --dport 8022 --state NEW,ESTABLISHED -m recent --set -j ACCEPT #-A INPUT -p tcp --dport 8022 --state NEW -m recent --update --seconds 600 --hitcount 11 -j DROP COMMIT *mangle #Flush previous rules, chains and counters in the 'mangle' table -F -X -Z COMMIT

    Read the article

  • iCloud stuff stops working while connected to OpenVPN

    - by Taco Bob
    I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again! (I tried serverfault, it was closed as off-topic. I'm trying here and the Unix site as well. Here because it's a more general audience that might know more about OpenVPN based on the number of questions I see asked about it) EDIT: -I have also tried upgrading to Version: 2.3-beta1-debian0 - issue persists. -Removed all iptables rules except for the ones that flush -left this rule:iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source (server ip) -added iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT still, nothing works. I can see traffic in tcpdump on the server if i watch the tunnel: 20:03:48.702835 IP nk11p01st-courier105-bz.push.apple.com.5223 10.9.8.6.60772: Flags [F.], seq 2635, ack 1218, win 76, options [nop,nop,TS val 914984811 ecr 745921298], length 0 20:03:48.911244 IP 10.9.8.6.60772 nk11p01st-courier105-bz.push.apple.com.5223: Flags [R], seq 3621143451, win 0, length 0 But still, no push messages/notifications are ever delivered. :/ EDIT: * Further testing indicates that it might actually be the client after all.

    Read the article

  • How do i enable innodb on ubuntu server 10.04

    - by Matt
    Here is my entire my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] key_buffer = 224M sort_buffer_size = 4M read_buffer_size = 4M read_rnd_buffer_size = 4M myisam_sort_buffer_size = 12M query_cache_size = 44M # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # #key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M #query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ And here is my show engines call....i have no idea what i need to do to enable innodb show engines; +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | Engine | Support | Comment | Transactions | XA | Savepoints | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | MyISAM | DEFAULT | Default engine as of MySQL 3.23 with great performance | NO | NO | NO | | MRG_MYISAM | YES | Collection of identical MyISAM tables | NO | NO | NO | | BLACKHOLE | YES | /dev/null storage engine (anything you write to it disappears) | NO | NO | NO | | CSV | YES | CSV storage engine | NO | NO | NO | | MEMORY | YES | Hash based, stored in memory, useful for temporary tables | NO | NO | NO | | FEDERATED | NO | Federated MySQL storage engine | NULL | NULL | NULL | | ARCHIVE | YES | Archive storage engine | NO | NO | NO | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ 7 rows in set (0.00 sec)

    Read the article

  • Dynamic DNS registration for VPN clients

    - by Eric Falsken
    I've got a VPN server set up in my Active Directory on a remote network. (VPN Server is separate box from DNS/AD) When I dial into the network (client machine is not a member of the AD) the machine does not register its IP or Hostname in the DNS. I've played with all possible combinations of DHCP and RRAS-allocated IP pools, and none of them seem to cause my client to register. Is it because my client has to be a member of the domain? Are there some security settins I can tweak so that it can register its hostname/ip? I've looked in the event logs (System and Security) for the AD, DNS, DHCP, RRAS, and the client machine, and don't see anything relating to DNS Registration. Here's the IPConfig on the client machine (once connected): PPP adapter My VPN Name: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : My VPN Name Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.22(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.52 <- DC1 192.168.1.53 <- DC2 NetBIOS over Tcpip. . . . . . . . : Enabled

    Read the article

  • Hanging of host network connections when starting KVM guest on bridge

    - by Chris Phillips
    Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

    Read the article

  • Openvpn issue with linux

    - by catsy
    So I've tried to setup openvpn, I followed some guide but it's stuck att "initialization sequence completed" with no connection and I can't find any working solution... here's the log: $Sun Sep 23 19:14:32 2012 OpenVPN 2.1.0 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010 Enter Auth Username:pumpedup Enter Auth Password: Sun Sep 23 19:14:37 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Sun Sep 23 19:14:37 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Sep 23 19:14:37 2012 LZO compression initialized Sun Sep 23 19:14:37 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Sun Sep 23 19:14:38 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sun Sep 23 19:14:38 2012 Local Options hash (VER=V4): '41690919' Sun Sep 23 19:14:38 2012 Expected Remote Options hash (VER=V4): '530fdded' Sun Sep 23 19:14:38 2012 Socket Buffers: R=[163840-131072] S=[163840-131072] Sun Sep 23 19:14:38 2012 UDPv4 link local: [undef] Sun Sep 23 19:14:38 2012 UDPv4 link remote: [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:38 2012 TLS: Initial packet from [AF_INET]192.162.102.162:1194, sid=87a95723 a6d7b7f9 Sun Sep 23 19:14:38 2012 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun Sep 23 19:14:38 2012 VERIFY OK: depth=1, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=nVpn_CA/[email protected] Sun Sep 23 19:14:38 2012 VERIFY OK: depth=0, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=server/[email protected] Sun Sep 23 19:14:39 2012 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1542', remote='link-mtu 6042' Sun Sep 23 19:14:39 2012 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1500', remote='tun-mtu 6000' Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sun Sep 23 19:14:39 2012 [server] Peer Connection Initiated with [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:41 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Sun Sep 23 19:14:41 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.8.8,route 10.102.162.1,topology net30,ping 10,ping-restart 120,ifconfig 10.102.162.6 10.102.162.5' Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: timers and/or timeouts modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ifconfig/up options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: route options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun Sep 23 19:14:41 2012 ROUTE default_gateway=10.0.2.2 Sun Sep 23 19:14:41 2012 TUN/TAP device tun0 opened Sun Sep 23 19:14:41 2012 TUN/TAP TX queue length set to 100 Sun Sep 23 19:14:41 2012 /sbin/ifconfig tun0 10.102.162.6 pointopoint 10.102.162.5 mtu 1500 Sun Sep 23 19:14:41 2012 /sbin/route add -net 192.162.102.162 netmask 255.255.255.255 gw 10.0.2.2 Sun Sep 23 19:14:41 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 10.102.162.1 netmask 255.255.255.255 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 Initialization Sequence Completed

    Read the article

  • pam_unix(sshd:session) session opened for user NOT ROOT by (uid=0), then closes immediately using using TortiseSVN

    - by codewaggle
    I'm having problems accessing an SVN repository using TortoiseSVN 1.7.8. The SVN repository is on a CentOS 6.3 box and appears to be functioning correctly. # svnadmin --version # svnadmin, version 1.6.11 (r934486) I can access the repository from another CentOS box with this command: svn list svn+ssh://[email protected]/var/svn/joetest But when I attempt to browse the repository using TortiseSVN from a Win 7 workstation I'm unable to do so using the following path: svn+ssh://[email protected]/var/svn/joetest I'm able to login via SSH from the workstation using Putty. The results are the same if I attempt access as root. I've given ownership of the repository to USER:USER and ran chmod 2700 -R /var/svn/. Because I can access the repository via ssh from another Linux box, permissions don't appear to be the problem. When I watch the log file using tail -fn 2000 /var/log/secure, I see the following each time TortiseSVN asks for the password: Sep 26 17:34:31 dev sshd[30361]: Accepted password for USER from xx.xxx.xx.xxx port 59101 ssh2 Sep 26 17:34:31 dev sshd[30361]: pam_unix(sshd:session): session opened for user USER by (uid=0) Sep 26 17:34:31 dev sshd[30361]: pam_unix(sshd:session): session closed for user USER I'm actually able to login, but the session is then closed immediately. It caught my eye that the session is being opened for USER by root (uid=0), which may be correct, but I'll mention it in case it has something to do with the problem. I looked into modifying the svnserve.conf, but as far as I can tell, it's not used when accessing the repository via svn+ssh, a private svnserve instance is created for each log in via this method. From the manual: There's still a third way to invoke svnserve, and that's in “tunnel mode”, with the -t option. This mode assumes that a remote-service program such as RSH or SSH has successfully authenticated a user and is now invoking a private svnserve process as that user. The svnserve program behaves normally (communicating via stdin and stdout), and assumes that the traffic is being automatically redirected over some sort of tunnel back to the client. When svnserve is invoked by a tunnel agent like this, be sure that the authenticated user has full read and write access to the repository database files. (See Servers and Permissions: A Word of Warning.) It's essentially the same as a local user accessing the repository via file:/// URLs. The only non-default settings in sshd_config are: Protocol 2 # to disable Protocol 1 SyslogFacility AUTHPRIV ChallengeResponseAuthentication no GSSAPIAuthentication yes GSSAPICleanupCredentials yes UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS X11Forwarding no Subsystem sftp /usr/libexec/openssh/sftp-server Any thoughts?

    Read the article

< Previous Page | 211 212 213 214 215 216 217 218 219 220 221 222  | Next Page >