Search Results

Search found 88206 results on 3529 pages for 'code coverage'.

Page 216/3529 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

  • Scala n00b: Critique my code

    - by Peter
    G'day everyone, I'm a Scala n00b (but am experienced with other languages) and am learning the language as I find time - very much enjoying it so far! Usually when learning a new language the first thing I do is implement Conway's Game of Life, since it's just complex enough to give a good sense of the language, but small enough in scope to be able to whip up in a couple of hours (most of which is spent wrestling with syntax). Anyhoo, having gone through this exercise with Scala I was hoping the Scala gurus out there might take a look at the code I've ended up with and provide feedback on it. I'm after anything - algorithmic improvements (particularly concurrent solutions!), stylistic improvements, alternative APIs or language constructs, disgust at the length of my function names - whatever feedback you've got, I'm keen to hear it! You should be able to run the following script via "scala GameOfLife.scala" - by default it will run a 20x20 board with a single glider on it - please feel free to experiment. // CONWAY'S GAME OF LIFE (SCALA) abstract class GameOfLifeBoard(val aliveCells : Set[Tuple2[Int, Int]]) { // Executes a "time tick" - returns a new board containing the next generation def tick : GameOfLifeBoard // Is the board empty? def empty : Boolean = aliveCells.size == 0 // Is the given cell alive? protected def alive(cell : Tuple2[Int, Int]) : Boolean = aliveCells contains cell // Is the given cell dead? protected def dead(cell : Tuple2[Int, Int]) : Boolean = !alive(cell) } class InfiniteGameOfLifeBoard(aliveCells : Set[Tuple2[Int, Int]]) extends GameOfLifeBoard(aliveCells) { // Executes a "time tick" - returns a new board containing the next generation override def tick : GameOfLifeBoard = new InfiniteGameOfLifeBoard(nextGeneration) // The next generation of this board protected def nextGeneration : Set[Tuple2[Int, Int]] = aliveCells flatMap neighbours filter shouldCellLiveInNextGeneration // Should the given cell should live in the next generation? protected def shouldCellLiveInNextGeneration(cell : Tuple2[Int, Int]) : Boolean = (alive(cell) && (numberOfAliveNeighbours(cell) == 2 || numberOfAliveNeighbours(cell) == 3)) || (dead(cell) && numberOfAliveNeighbours(cell) == 3) // The number of alive neighbours for the given cell protected def numberOfAliveNeighbours(cell : Tuple2[Int, Int]) : Int = aliveNeighbours(cell) size // Returns the alive neighbours for the given cell protected def aliveNeighbours(cell : Tuple2[Int, Int]) : Set[Tuple2[Int, Int]] = aliveCells intersect neighbours(cell) // Returns all neighbours (whether dead or alive) for the given cell protected def neighbours(cell : Tuple2[Int, Int]) : Set[Tuple2[Int, Int]] = Set((cell._1-1, cell._2-1), (cell._1, cell._2-1), (cell._1+1, cell._2-1), (cell._1-1, cell._2), (cell._1+1, cell._2), (cell._1-1, cell._2+1), (cell._1, cell._2+1), (cell._1+1, cell._2+1)) // Information on where the currently live cells are protected def xVals = aliveCells map { cell => cell._1 } protected def xMin = (xVals reduceLeft (_ min _)) - 1 protected def xMax = (xVals reduceLeft (_ max _)) + 1 protected def xRange = xMin until xMax + 1 protected def yVals = aliveCells map { cell => cell._2 } protected def yMin = (yVals reduceLeft (_ min _)) - 1 protected def yMax = (yVals reduceLeft (_ max _)) + 1 protected def yRange = yMin until yMax + 1 // Returns a simple graphical representation of this board override def toString : String = { var result = "" for (y <- yRange) { for (x <- xRange) { if (alive (x,y)) result += "# " else result += ". " } result += "\n" } result } // Equality stuff override def equals(other : Any) : Boolean = { other match { case that : InfiniteGameOfLifeBoard => (that canEqual this) && that.aliveCells == this.aliveCells case _ => false } } def canEqual(other : Any) : Boolean = other.isInstanceOf[InfiniteGameOfLifeBoard] override def hashCode = aliveCells.hashCode } class FiniteGameOfLifeBoard(val boardWidth : Int, val boardHeight : Int, aliveCells : Set[Tuple2[Int, Int]]) extends InfiniteGameOfLifeBoard(aliveCells) { override def tick : GameOfLifeBoard = new FiniteGameOfLifeBoard(boardWidth, boardHeight, nextGeneration) // Determines the coordinates of all of the neighbours of the given cell override protected def neighbours(cell : Tuple2[Int, Int]) : Set[Tuple2[Int, Int]] = super.neighbours(cell) filter { cell => cell._1 >= 0 && cell._1 < boardWidth && cell._2 >= 0 && cell._2 < boardHeight } // Information on where the currently live cells are override protected def xRange = 0 until boardWidth override protected def yRange = 0 until boardHeight // Equality stuff override def equals(other : Any) : Boolean = { other match { case that : FiniteGameOfLifeBoard => (that canEqual this) && that.boardWidth == this.boardWidth && that.boardHeight == this.boardHeight && that.aliveCells == this.aliveCells case _ => false } } override def canEqual(other : Any) : Boolean = other.isInstanceOf[FiniteGameOfLifeBoard] override def hashCode : Int = { 41 * ( 41 * ( 41 + super.hashCode ) + boardHeight.hashCode ) + boardWidth.hashCode } } class GameOfLife(initialBoard: GameOfLifeBoard) { // Run the game of life until the board is empty or the exact same board is seen twice // Important note: this method does NOT necessarily terminate!! def go : Unit = { var currentBoard = initialBoard var previousBoards = List[GameOfLifeBoard]() while (!currentBoard.empty && !(previousBoards contains currentBoard)) { print(27.toChar + "[2J") // ANSI: clear screen print(27.toChar + "[;H") // ANSI: move cursor to top left corner of screen println(currentBoard.toString) Thread.sleep(75) // Warning: unbounded list concatenation can result in OutOfMemoryExceptions ####TODO: replace with LRU bounded list previousBoards = List(currentBoard) ::: previousBoards currentBoard = currentBoard tick } // Print the final board print(27.toChar + "[2J") // ANSI: clear screen print(27.toChar + "[;H") // ANSI: move cursor to top left corner of screen println(currentBoard.toString) } } // Script starts here val simple = Set((1,1)) val square = Set((4,4), (4,5), (5,4), (5,5)) val glider = Set((2,1), (3,2), (1,3), (2,3), (3,3)) val initialBoard = glider (new GameOfLife(new FiniteGameOfLifeBoard(20, 20, initialBoard))).go //(new GameOfLife(new InfiniteGameOfLifeBoard(initialBoard))).go // COPYRIGHT PETER MONKS 2010 Thanks! Peter

    Read the article

  • HTTP error code 405: tomcat Url mapping issue

    - by Andrew
    I am having trouble POSTing to my java HTTPServlet. I am getting "HTTP Status 405 - HTTP method GET is not supported by this URL" from my tomcat server". When I debug the servlet the login method is never called. I think it's a url mapping issue within tomcat... web.xml <servlet-mapping> <servlet-name>faxcom</servlet-name> <url-pattern>/faxcom/*</url-pattern> </servlet-mapping> FaxcomService.java @Path("/rest") public class FaxcomService extends HttpServlet{ private FAXCOM_x0020_ServiceLocator service; private FAXCOM_x0020_ServiceSoap port; @GET @Produces("application/json") public String testGet() { return "{ \"got here\":true }"; } @POST @Path("/login") @Consumes("application/json") // @Produces("application/json") public Response login(LoginBean login) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(10); try { service = new FAXCOM_x0020_ServiceLocator(); service.setFAXCOM_x0020_ServiceSoapEndpointAddress("http://cd-faxserver/faxcom_ws/faxcomservice.asmx"); service.setMaintainSession(true); // enable sessions support port = service.getFAXCOM_x0020_ServiceSoap(); rm.add(new ResultMessageBean(port.logOn( "\\\\CD-Faxserver\\FaxcomQ_API", /* path to the queue */ login.getUserName(), /* username */ login.getPassword(), /* password */ login.getUserType() /* 2 = user conf user */ ))); } catch (RemoteException e) { e.printStackTrace(); } catch (ServiceException e) { e.printStackTrace(); } // return rm; return Response.status(201).entity(rm).build(); } @POST @Path("/newFaxMessage") @Consumes(MediaType.APPLICATION_JSON) @Produces(MediaType.APPLICATION_JSON) public ArrayList<ResultMessageBean> newFaxMessage(FaxBean fax) { ArrayList<ResultMessageBean> rm = new ArrayList<ResultMessageBean>(); try { rm.add(new ResultMessageBean(port.newFaxMessage( fax.getPriority(), /* priority: 0 - low, 1 - normal, 2 - high, 3 - urgent */ fax.getSendTime(), /* send time */ /* "0.0" - immediate */ /* "1.0" - offpeak */ /* "9/14/2007 5:12:11 PM" - to set specific time */ fax.getResolution(), /* resolution: 0 - low res, 1 - high res */ fax.getSubject(), /* subject */ fax.getCoverpage(), /* cover page: "" – default, “(none)� – no cover page */ fax.getMemo(), /* memo */ fax.getSenderName(), /* sender's name */ fax.getSenderFaxNumber(), /* sender's fax */ fax.getRecipients().get(0).getName(), /* recipient's name */ fax.getRecipients().get(0).getCompany(), /* recipient's company */ fax.getRecipients().get(0).getFaxNumber(), /* destination fax number */ fax.getRecipients().get(0).getVoiceNumber(), /* recipient's phone number */ fax.getRecipients().get(0).getAccountNumber() /* recipient's account number */ ))); if (fax.getRecipients().size() > 1) { for (int i = 1; i < fax.getRecipients().size(); i++) rm.addAll(addRecipient(fax.getRecipients().get(i))); } } catch (RemoteException e) { // TODO Auto-generated catch block e.printStackTrace(); } return rm; } } Main.java private static void main(String[] args) { try { URL url = new URL("https://andrew-vm/faxcom/rest/login"); HttpURLConnection conn = (HttpURLConnection) url.openConnection(); conn.setRequestMethod("POST"); conn.setDoOutput(true); conn.setRequestProperty("Content-Type", "application/json"); FileInputStream jsonDemo = new FileInputStream("login.txt"); OutputStream os = (OutputStream) conn.getOutputStream(); os.write(IOUtils.toByteArray(jsonDemo)); os.flush(); if (conn.getResponseCode() != 200) { throw new RuntimeException("Failed : HTTP error code : " + conn.getResponseCode()); } BufferedReader br = new BufferedReader(new InputStreamReader( (conn.getInputStream()))); String output; System.out.println("Output from Server .... \n"); while ((output = br.readLine()) != null) { System.out.println(output); } // Don't want to disconnect - servletInstance will be destroyed // conn.disconnect(); } catch (MalformedURLException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } } I am working from this tutorial: http://www.mkyong.com/webservices/jax-rs/restfull-java-client-with-java-net-url/

    Read the article

  • C# Request not timing out

    - by Joel Kennedy
    I have this code which runs in a BackgroundWorker, and should make a POST request to the server and get a response. It works fine when it is supposed to work, but when I try to induce a 404 error it doesn't catch the error reporting system. loginProcess.DoWork += delegate(object s, DoWorkEventArgs args) { // loginProcess BackgroundWorker try { // Try to login, if error, report loginProcess.ReportProgress(10); String method = "POST"; String postdata = "postdata=test"; String url = "http://localhost/dev/login.php"; loginProcess.ReportProgress(15); WebRequest rqst = HttpWebRequest.Create(url); rqst.Timeout = 5000; ((HttpWebRequest)rqst).KeepAlive = true; loginProcess.ReportProgress(20); //rqst.Timeout = this.Timeout; // only needed, if you use HTTP AUTH //CredentialCache creds = new CredentialCache(); //creds.Add(new Uri(url), "Basic", new NetworkCredential(this.Uname, this.Pwd)); //rqst.Credentials = creds; rqst.Method = method; if (!String.IsNullOrEmpty(postdata)) { //rqst.ContentType = "application/xml"; rqst.ContentType = "application/x-www-form-urlencoded"; loginProcess.ReportProgress(30); byte[] byteData = UTF8Encoding.UTF8.GetBytes(postdata); loginProcess.ReportProgress(40); rqst.ContentLength = byteData.Length; loginProcess.ReportProgress(50); using (Stream postStream = rqst.GetRequestStream()) { loginProcess.ReportProgress(50); postStream.Write(byteData, 0, byteData.Length); loginProcess.ReportProgress(60); postStream.Close(); loginProcess.ReportProgress(70); rqst.GetResponse().Close(); rqst.GetRequestStream().Close(); } } loginProcess.ReportProgress(90); using (var response1 = rqst.GetResponse()) { using (var responseStream1 = response1.GetResponseStream()) { using (var reader1 = new StreamReader(responseStream1)) { //StreamReader rsps = new StreamReader(rqst.GetResponse().GetResponseStream()); string strRsps = reader1.ReadToEnd(); loginProcess.ReportProgress(95); loginVars = strRsps; //rqst. //reader1.Close(); //rsps.Dispose(); } args.Result = "SUCCESS"; } } } catch(WebException err) { // Catch error and put into err variable if(err.Status == WebExceptionStatus.ProtocolError) { // If something is wrong with protocol LoginReporting.ErrorName = Convert.ToString(((HttpWebResponse)err.Response).StatusCode); LoginReporting.ErrorDescription = Convert.ToString(((HttpWebResponse)err.Response).StatusDescription); LoginReporting.ErrorNotes = "Error when logging in, Server returned: " + Convert.ToString(((HttpWebResponse)err.Response).StatusCode); LoginReporting.ErrorLocation = "LoginRequest.ProtocolError"; args.Result = "ERROR"; //MessageBox.Show(Convert.ToString(((HttpWebResponse)err.Response).StatusCode)); //MessageBox.Show(Convert.ToString(((HttpWebResponse)err.Response).StatusDescription)); } else { args.Result = "ERROR"; } } catch(Exception err) { // Catch unhandled error LoginReporting.ErrorName = Convert.ToString(err); LoginReporting.ErrorDescription = Convert.ToString(err.Message); LoginReporting.ErrorNotes = "Error when logging in, Server returned: " + Convert.ToString(err.Message); LoginReporting.ErrorLocation = "LoginRequest.ProtocolError"; args.Result = "ERROR"; } }; I have put a timeout on the request but it just doesn't work! Is this a bug, or am I doing something wrong here? Thanks

    Read the article

  • Android source code not working, reading frame buffer through glReadPixels

    - by Muhammad Ali Rajput
    Hi, I am new to Android development and have an assignment to read frame buffer data after a specified interval of time. I have come up with the following code: public class mainActivity extends Activity { Bitmap mSavedBM; private EGL10 egl; private EGLDisplay display; private EGLConfig config; private EGLSurface surface; private EGLContext eglContext; private GL11 gl; protected int width, height; //Called when the activity is first created. @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // get the screen width and height DisplayMetrics dm = new DisplayMetrics(); getWindowManager().getDefaultDisplay().getMetrics(dm); int screenWidth = dm.widthPixels; int screenHeight = dm.heightPixels; String SCREENSHOT_DIR = "/screenshots"; initGLFr(); //GlView initialized. savePixels( 0, 10, screenWidth, screenHeight, gl); //this gets the screen to the mSavedBM. saveBitmap(mSavedBM, SCREENSHOT_DIR, "capturedImage"); //Now we need to save the bitmap (the screen capture) to some location. setContentView(R.layout.main); //This displays the content on the screen } private void initGLFr() { egl = (EGL10) EGLContext.getEGL(); display = egl.eglGetDisplay(EGL10.EGL_DEFAULT_DISPLAY); int[] ver = new int[2]; egl.eglInitialize(display, ver); int[] configSpec = {EGL10.EGL_NONE}; EGLConfig[] configOut = new EGLConfig[1]; int[] nConfig = new int[1]; egl.eglChooseConfig(display, configSpec, configOut, 1, nConfig); config = configOut[0]; eglContext = egl.eglCreateContext(display, config, EGL10.EGL_NO_CONTEXT, null); surface = egl.eglCreateWindowSurface(display, config, SurfaceHolder.SURFACE_TYPE_GPU, null); egl.eglMakeCurrent(display, surface, surface, eglContext); gl = (GL11) eglContext.getGL(); } public void savePixels(int x, int y, int w, int h, GL10 gl) { if (gl == null) return; synchronized (this) { if (mSavedBM != null) { mSavedBM.recycle(); mSavedBM = null; } } int b[] = new int[w * (y + h)]; int bt[] = new int[w * h]; IntBuffer ib = IntBuffer.wrap(b); ib.position(0); gl.glReadPixels(x, 0, w, y + h, GL10.GL_RGBA,GL10.GL_UNSIGNED_BYTE,ib); for (int i = 0, k = 0; i < h; i++, k++) { //OpenGLbitmap is incompatible with Android bitmap //and so, some corrections need to be done. for (int j = 0; j < w; j++) { int pix = b[i * w + j]; int pb = (pix >> 16) & 0xff; int pr = (pix << 16) & 0x00ff0000; int pix1 = (pix & 0xff00ff00) | pr | pb; bt[(h - k - 1) * w + j] = pix1; } } Bitmap sb = Bitmap.createBitmap(bt, w, h, Bitmap.Config.ARGB_8888); synchronized (this) { mSavedBM = sb; } } static String saveBitmap(Bitmap bitmap, String dir, String baseName) { try { File sdcard = Environment.getExternalStorageDirectory(); File pictureDir = new File(sdcard, dir); pictureDir.mkdirs(); File f = null; for (int i = 1; i < 200; ++i) { String name = baseName + i + ".png"; f = new File(pictureDir, name); if (!f.exists()) { break; } } if (!f.exists()) { String name = f.getAbsolutePath(); FileOutputStream fos = new FileOutputStream(name); bitmap.compress(Bitmap.CompressFormat.PNG, 100, fos); fos.flush(); fos.close(); return name; } } catch (Exception e) { } finally { //if (fos != null) { // fos.close(); // } } return null; } } Also, if some one can direct me to better way to read the framebuffer it would be great. I am using Android 2.2 and virtual device of API level 8. I have gone through many previous discussions and have found that we can not know read frame buffer directly throuh the "/dev/graphics/fb0". Thanks, Muhammad Ali

    Read the article

  • PHP + Code Igniter Timecode Calculation Logic Error

    - by Tim
    Hello everyone, I have what I suspect to be a logic problem with an algorithm I am using to work with Video timecode in PHP. All help is appreciated. The Objective Well basically I want to work with timecode and perform calculations For those not familiar with timecode it looks like this 01:10:58:12 or HH:MM:SS:FF 'AKA' HOURS:MINUTES:SECONDS:FRAMES I have used the script from HERE to help me with working with this format. The Problem Now can i just say that this script works!!! Timecode calculations (in this case additions) are being performed correctly. However this script continually throws the following errors, yet still produces the correct output when I try and do the following calculation 00:01:26:00 + 00:02:00:12 The errors from this calculation are shown below A PHP Error was encountered Severity: Notice Message: Undefined index: key Filename: staff/tools.php Line Number: 169 A PHP Error was encountered Severity: Notice Message: Undefined index: key Filename: staff/tools.php Line Number: 169 Line Number 169 is in the parseInput() function // feed it into the tc array $i=0; foreach ($tc AS $key=>$value) { if ( is_numeric($array["$i"]) ) { $tc["$key"]= $array["$i"]; if ($tc["$key"] < 10 && $tc["$key"] > 0 && strlen($tc['key'])==1 ) $tc["$key"]= "0".$tc["$key"]; } $i++; } return $tc; Now I should also mention that the number of times the above error is thrown depends on what I am calculating 00:00:00:00 + 00:00:00:00 returns no errors. 01:01:01:01 + 02:02:02:02 produces 8 of the above errors. For your reference, here is the code in it's entirety function add_cue_sheet_clips_process() { $sheetID = $_POST['sheet_id']; $clipName = $_POST['clip_name']; $tcIn = $_POST['tc_in']; $tcOut = $_POST['tc_out']; // string $input // returns an associative array of hours, minutes, seconds, and frames // function parseInput ($input) { // timecode should look something like hh:mm:ss;ff // allowed separators are : ; . , // values may be single or double digits // hours are least-significant -- 5.4 == 00:00:05;04 $tc= array("frames"=>"00", "seconds"=>"00", "minutes"=>"00", "hours"=>"00"); $punct= array(":", ";", ".", ","); // too big? too small? $input= trim($input); if (strlen($input)>11 || $input=="") { // invalid input, too long -- bzzt return $tc; } // normalize punctuation $input= str_replace( $punct, ":", $input); // blow it up and reverse it so frames come first $array= explode(":", $input); $array= array_reverse($array); // feed it into the tc array $i=0; foreach ($tc AS $key=>$value) { if ( is_numeric($array["$i"]) ) { $tc["$key"]= $array["$i"]; if ($tc["$key"] < 10 && $tc["$key"] > 0 && strlen($tc['key'])==1 ) $tc["$key"]= "0".$tc["$key"]; } $i++; } return $tc; } // array $tc // returns a float number of seconds // function tcToSec($tc) { $wholeseconds= ($tc['hours']*3600) + ($tc['minutes'] * 60) + ($tc['seconds']); $partseconds= ( $tc['frames'] / 25 ); $seconds= $wholeseconds + $partseconds; return $seconds; } // float $seconds // bool $subtract // returns a timecode array // function secToTc ($seconds=0, $subtract=0) { $tc= array("frames"=>"00", "seconds"=>"00", "minutes"=>"00", "hours"=>"00"); $partseconds= fmod($seconds, 1); $wholeseconds= $seconds - $partseconds; // frames if ($subtract==1) $tc['frames']= floor( $partseconds * 25 ); else $tc['frames']= floor( $partseconds * 25 ); // hours $tc['hours']= floor( $wholeseconds / 3600 ); $minsec= ($wholeseconds - ($tc['hours'] * 3600)); // minutes $tc['minutes']= floor( $minsec / 60 ); // seconds $tc['seconds']= ( $minsec - ($tc['minutes'] * 60) ); // padding foreach ( $tc AS $key=>$value ) { if ($value > 0 && $value < 10) $tc["$key"]= "0".$value; if ($value=="0") $tc["$key"]= "00"; } return $tc; } // array $tc // returns string of well-formed timecode // function tcToString (&$tc) { return $tc['hours'].":".$tc['minutes'].":".$tc['seconds'].";".$tc['frames']; } $timecodeIN = parseInput($tcIn); $timecodeOUT = parseInput($tcOut); // normalized inputs... $tc1 = tcToString($timecodeIN); $tc2 = tcToString($timecodeOUT); // get seconds $seconds1 = tcToSec($timecodeIN); $seconds2 = tcToSec($timecodeOUT); $result = $seconds1 + $seconds2; $timecode3 = secToTc($result, 0); $timecodeDUR = tcToString($timecode3); $clipArray = array('clip_name' => $clipName, 'tc_in' => $tcIn, 'tc_out' => $tcOut, 'tc_duration' => $timecodeDUR); $this->db->insert('tools_cue_sheets_clips', $clipArray); redirect('staff/tools/add_cue_sheet_clips/'.$sheetID); } I hope this is enough information for someone to help me get on top of this, I would be extremely greatful. Thanks, Tim

    Read the article

  • Help with this code.

    - by karthick6891
    Heading ##Hey guys i need help with this code.The short version is,i have to do match the follwing by using drag and drop in jquery and later i need to show a message whether it is right or wrong. var output = "Wrong"; var old_item ; var new_item ; var newObjArray=[]; $(function() { var $gallery = $('.gallery'), $trash = $('.trash'); $('div',$gallery).draggable({ revert: 'invalid', containment: 'document', helper: 'clone', cursor: 'move', }); // let the trash be droppable, accepting the gallery items $trash.droppable({ //accept: '#gallery div', //activeClass: 'ui-state-highlight', tolerance: 'touch', drop: function(ev, ui) { new_item = ui.draggable; $(this).droppable("option","activeClass",'.ui-state-highlight'); if(contains(newObjArray,ui.draggable)) { newObjArray.pop(ui.draggable); } newObjArray.push(ui.draggable); deleteImage(ui.draggable,$(this)); } }); // let the gallery be droppable as well, accepting items from the trash $gallery.droppable({ //accept: '#trash li', activeClass: 'custom-state-active', drop: function(ev, ui) { recycleImage(ui.draggable); } }); // image deletion function function deleteImage($item,element) { var $list; $item.fadeOut(10,function() { if($(".ui-widget-content", element).length <1){ old_item = $item; $list = $('<div class="gallery ui-helper-reset"/>').appendTo(element); //$('ul',$trash).length ? $('ul',$trash) : $('<ul class="gallery ui-helper-reset"/>').appendTo($trash); $item.appendTo($list).fadeIn(10); } else{ recycleImage($(".ui-widget-content",element)); $list = $('<div class="gallery ui-helper-reset"/>').appendTo(element); $item.appendTo($list).fadeIn(10); old_item = $item; } }); } //check for given answer // image recycle function function recycleImage($item) { $item.fadeOut(10,function() { $item.find("img").end().appendTo($gallery).fadeIn(10); }); } // image preview function, demonstrating the ui.dialog used as a modal window }); function checkOrder(){ if(newObjArray==null){ } else if(newObjArray!=null){ if(newObjArray[0].attr("id")=="5"&& newObjArray[1].attr("id")=="1" && newObjArray[2].attr("id")=="3" && newObjArray[3].attr("id")=="2" && newObjArray[4].attr("id")=="4"){ parent.parent.increaseCorrectA(); } else{ parent.parent.increaseWrongA(); } } } function contains(a, obj) { var i = a.length; while (i--) { if (a[i] === obj) { return true; } } return false; } I am calling the function checkOrder() from the html page after the matching of items is over.What happens here is i have just stored the user responses on the draggable over droppable in an array,based on it's position.It is a bad practice cause,i am saying whether it's right or wrong through its position in the array.The only thing i can do is get the draggable's id present in the droppable.But i dont know how to get that inside the function checkOrder().Any ideas please?

    Read the article

  • finishing some functions in this code

    - by osabri
    i have problem to finish some functions in this code program lab4; var inFile : text; var pArray : array[1..10]of real; //array of 10 integer values containing patterns to search in a given set of numbers var rArray : array[1..10]of integer; //array containing result of pattern search, each index in rArray coresponds to number of occurences of //pattern from pArray in sArray. var sArray : array[1..100] of real; //array containing data read from file var accuracy : real; (****************************************************************************) function errMsg:integer; begin if ParamCount < 3 then begin writeln('Too few arguments'); writeln('Usage: ./lab4 lab4.txt <accuracy> <pattern_1> <pattern_2> <pattern_n>'); errMsg:=-1; end else if ParamCount > 12 then begin writeln('Too many arguments'); writeln('Maximum number of patterns is 10'); errMsg:=-1; end else begin assign(inFile,ParamStr(1)); {$I-} reset(inFile); if ioresult<>0 then begin writeln('Cannot open ',ParamStr(1)); errMsg:=-1; end else errMsg:=0; end; end; (****************************************************************************) procedure readPattern; var errPos,idx:integer; begin if errMsg=0 then begin for idx:=1 to ParamCount-2 do begin Val(ParamStr(idx+2),pArray[idx],errPos); writeln('pArray:',pArray[idx]:2:2); end; end; end; (****************************************************************************) procedure getAccuracy; //Function should get the accuracy as the first param (after the program name) begin (here where i stopped : (( ) end; (****************************************************************************) function readSet:integer; //Function returns number of elements read from file var idx,errPos:integer; var sChar: string; begin if errMsg=0 then begin idx:=1; repeat begin readln(inFile,sChar); VAL(sChar,sArray[idx],errPos); writeln('sArray:',sArray[idx]:2:2); idx:=idx+1; end until eof(inFile)=TRUE; end; readSet:=idx-1; end; (****************************************************************************) procedure searchPattern(sNumber:integer); //Function should search and count pattern(patterns) occurence in a given set what the best solution for this part?? (****************************************************************************) procedure dispResult; //Function should display the result of pattern(patterns) search begin (****************************************************************************) begin readPattern; getAccuracy; searchPattern(readSet); dispResult; end.

    Read the article

  • error LNK2019 for ZLib sample code compiling.

    - by Nano HE
    Hello. I created win32 console application in vs2010 (without select the option of precompiled header). And I inserted the code below. but *.obj link failed. Could you provide me more information about the error. I searched MSDN, but still can't understand it. #include <stdio.h> #include "zlib.h" // Demonstration of zlib utility functions unsigned long file_size(char *filename) { FILE *pFile = fopen(filename, "rb"); fseek (pFile, 0, SEEK_END); unsigned long size = ftell(pFile); fclose (pFile); return size; } int decompress_one_file(char *infilename, char *outfilename) { gzFile infile = gzopen(infilename, "rb"); FILE *outfile = fopen(outfilename, "wb"); if (!infile || !outfile) return -1; char buffer[128]; int num_read = 0; while ((num_read = gzread(infile, buffer, sizeof(buffer))) > 0) { fwrite(buffer, 1, num_read, outfile); } gzclose(infile); fclose(outfile); } int compress_one_file(char *infilename, char *outfilename) { FILE *infile = fopen(infilename, "rb"); gzFile outfile = gzopen(outfilename, "wb"); if (!infile || !outfile) return -1; char inbuffer[128]; int num_read = 0; unsigned long total_read = 0, total_wrote = 0; while ((num_read = fread(inbuffer, 1, sizeof(inbuffer), infile)) > 0) { total_read += num_read; gzwrite(outfile, inbuffer, num_read); } fclose(infile); gzclose(outfile); printf("Read %ld bytes, Wrote %ld bytes, Compression factor %4.2f%%\n", total_read, file_size(outfilename), (1.0-file_size(outfilename)*1.0/total_read)*100.0); } int main(int argc, char **argv) { compress_one_file(argv[1],argv[2]); decompress_one_file(argv[2],argv[3]);} Output: 1>------ Build started: Project: zlibApp, Configuration: Debug Win32 ------ 1> zlibApp.cpp 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(15): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details. 1> c:\program files\microsoft visual studio 10.0\vc\include\stdio.h(234) : see declaration of 'fopen' 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(25): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details. 1> c:\program files\microsoft visual studio 10.0\vc\include\stdio.h(234) : see declaration of 'fopen' 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(40): warning C4996: 'fopen': This function or variable may be unsafe. Consider using fopen_s instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online help for details. 1> c:\program files\microsoft visual studio 10.0\vc\include\stdio.h(234) : see declaration of 'fopen' 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(36): warning C4715: 'decompress_one_file' : not all control paths return a value 1>d:\learning\cpp\cppvs2010\zlibapp\zlibapp\zlibapp.cpp(57): warning C4715: 'compress_one_file' : not all control paths return a value 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzclose referenced in function "int __cdecl decompress_one_file(char *,char *)" (?decompress_one_file@@YAHPAD0@Z) 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzread referenced in function "int __cdecl decompress_one_file(char *,char *)" (?decompress_one_file@@YAHPAD0@Z) 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzopen referenced in function "int __cdecl decompress_one_file(char *,char *)" (?decompress_one_file@@YAHPAD0@Z) 1>zlibApp.obj : error LNK2019: unresolved external symbol _gzwrite referenced in function "int __cdecl compress_one_file(char *,char *)" (?compress_one_file@@YAHPAD0@Z) 1>D:\learning\cpp\cppVS2010\zlibApp\Debug\zlibApp.exe : fatal error LNK1120: 4 unresolved externals ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

    Read the article

  • PHP returning part of the code document

    - by The.Anti.9
    I have a PHP page that does a couple of different things depending on what action is set to in the GET data. Depending, it is supposed to return some JSON, but instead of doing anything it is supposed to it returns the bottom half of the code document itself, starting in the middle of the line. Heres the snippit from where it starts: ... } elseif ($_GET['action'] == 'addtop') { if (!isset($_GET['pname']) || !isset($_GET['url']) || !isset($_GET['artist']) || !isset($_GET['album']) || !isset($_GET['file'])) { die('Error: Incomplete data!'); } if (!file_exists($_GET['pname'].".txt")) { die('Error: No such playlist!'); } $plist = json_decode(file_get_contents($_GET['pname'].".txt"), true); $fh = fopen($_GET['pname'].".txt", 'w') or die('Could not open playlist!'); array_push($plist, array("artist" => $_GET['artist'], "album" => $_GET['album'], "file" => $_GET['file'], "url" => $_GET['url'])); fwrite($fh,json_encode($plist)); } elseif ($_GET['action'] == 'delfromp') { ... And here is what I get when I go to the page: $_GET['artist'], "album" = $_GET['album'], "file" = $_GET['file'], "url" = $_GET['url'])); fwrite($fh,json_encode($plist)); } elseif ($_GET['action'] == 'delfromp') { if (!isset($_GET['pname']) || !isset($_GET['id'])) { die('Error: Incomplete data!'); } if (!file_exists($_GET['pname'].".txt")) { die('Error: No such playlist!'); } $plist = json_decode(file_get_contents($_GET['pname'].".txt"), true); $fh = fopen($_GET['pname'].".txt", 'w') or die('Could not open playlist!'); unset($plist[$_GET['id']]); $plist = array_values($plist); fwrite($fh,json_encode($plist)); } elseif ($_GET['action'] == 'readp') { if (!file_exists($_GET['pname'].".txt")) { die('Error: No such playlist!'); } $plist = json_decode(file_get_contents($_GET['pname'].".txt"), true); $arr = array("entries" = $plist); $json = json_encode($arr); echo $json; } elseif ($_GET['action'] == 'getps') { $plists = array(); if ($handle = opendir('Playlists')) { while (false !== ($playlist = readdir($handle))) { if ($playlist != "." && $playlist != "..") { array_push($plists, substr($playlist, 0, strripos($playlist, '.')-1)); } } } else { die('Error: Can\'T open playlists!'); } $arr = array("entries"=$plists); $json = json_encode($arr); echo $json; } else { die('Error: No such action!'); } ? It starts in the middle of the array_push(... line. I really can't think of what it is doing. Theres no echos anywhere around it. Any ideas?

    Read the article

  • Right code to retrieve data from sql server database

    - by HasanGursoy
    Hi, I have some problems in database connection and wonder if I have something wrong in my code. Please review. This question is related: Switch between databases, use two databases simultaneously question. cs="Data Source=mywebsite.com;Initial Catalog=database;User Id=root;Password=toor;Connect Timeout=10;Pooling='true';" using (SqlConnection cnn = new SqlConnection(WebConfigurationManager.ConnectionStrings["cs"].ConnectionString)) { using (SqlCommand cmmnd = new SqlCommand("", cnn)) { try { cnn.Open(); #region Header & Description cmmnd.Parameters.Add("@CatID", SqlDbType.Int).Value = catId; cmmnd.CommandText = "SELECT UpperID, Title, Description FROM Categories WHERE CatID=@CatID;"; string mainCat = String.Empty, rootCat = String.Empty; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { if (rdr.Read()) { mainCat = rdr["Title"].ToString(); upperId = Convert.ToInt32(rdr["UpperID"]); description = rdr["Title"]; } else { Response.Redirect("/", false); } } if (upperId > 0) //If upper category exists add its name { cmmnd.Parameters["@CatID"].Value = upperId; cmmnd.CommandText = "SELECT Title FROM Categories WHERE CatID=@CatID;"; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { if (rdr.Read()) { rootCat = "<a href='x.aspx'>" + rdr["Title"] + "</a> &raquo; "; } } } #endregion #region Sub-Categories if (upperId == 0) //show only at root categories { cmmnd.Parameters["@CatID"].Value = catId; cmmnd.CommandText = "SELECT Count(CatID) FROM Categories WHERE UpperID=@CatID;"; if (Convert.ToInt32(cmmnd.ExecuteScalar()) > 0) { cmmnd.CommandText = "SELECT CatID, Title FROM Categories WHERE UpperID=@CatID ORDER BY Title;"; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { while (rdr.Read()) { subcat.InnerHtml += "<a href='x.aspx'>" + rdr["Title"].ToString().ToLower() + "</a>\n"; description += rdr["Title"] + ", "; } } } } #endregion } catch (Exception ex) { HasanG.LogException(ex, Request.RawUrl, HttpContext.Current); Response.Redirect("/", false); } finally { cnn.Close(); } } } The random errors I'm receiving are: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Cannot open database "db" requested by the login. The login failed. Login failed for user 'root'.

    Read the article

  • Game AI: Pattern for implementing Sense-Think-Act components?

    - by Rosarch
    I'm developing a game. Each entity in the game is a GameObject. Each GameObject is composed of a GameObjectController, GameObjectModel, and GameObjectView. (Or inheritants thereof.) For NPCs, the GameObjectController is split into: IThinkNPC: reads current state and makes a decision about what to do IActNPC: updates state based on what needs to be done ISenseNPC: reads current state to answer world queries (eg "am I being in the shadows?") My question: Is this ok for the ISenseNPC interface? public interface ISenseNPC { // ... /// <summary> /// True if `dest` is a safe point to which to retreat. /// </summary> /// <param name="dest"></param> /// <param name="angleToThreat"></param> /// <param name="range"></param> /// <returns></returns> bool IsSafeToRetreat(Vector2 dest, float angleToThreat, float range); /// <summary> /// Finds a new location to which to retreat. /// </summary> /// <param name="angleToThreat"></param> /// <returns></returns> Vector2 newRetreatDest(float angleToThreat); /// <summary> /// Returns the closest LightSource that illuminates the NPC. /// Null if the NPC is not illuminated. /// </summary> /// <returns></returns> ILightSource ClosestIlluminatingLight(); /// <summary> /// True if the NPC is sufficiently far away from target. /// Assumes that target is the only entity it could ever run from. /// </summary> /// <returns></returns> bool IsSafeFromTarget(); } None of the methods take any parameters. Instead, the implementation is expected to maintain a reference to the relevant GameObjectController and read that. However, I'm now trying to write unit tests for this. Obviously, it's necessary to use mocking, since I can't pass arguments directly. The way I'm doing it feels really brittle - what if another implementation comes along that uses the world query utilities in a different way? Really, I'm not testing the interface, I'm testing the implementation. Poor. The reason I used this pattern in the first place was to keep IThinkNPC implementation code clean: public BehaviorState RetreatTransition(BehaviorState currentBehavior) { if (sense.IsCollidingWithTarget()) { NPCUtils.TraceTransitionIfNeeded(ToString(), BehaviorState.ATTACK.ToString(), "is colliding with target"); return BehaviorState.ATTACK; } if (sense.IsSafeFromTarget() && sense.ClosestIlluminatingLight() == null) { return BehaviorState.WANDER; } if (sense.ClosestIlluminatingLight() != null && sense.SeesTarget()) { NPCUtils.TraceTransitionIfNeeded(ToString(), BehaviorState.ATTACK.ToString(), "collides with target"); return BehaviorState.CHASE; } return currentBehavior; } Perhaps the cleanliness isn't worth it, however. So, if ISenseNPC takes all the params it needs every time, I could make it static. Is there any problem with that?

    Read the article

  • Make c# matrix code faster

    - by Wam
    Hi all, Working on some matrix code, I'm concerned of performance issues. here's how it works : I've a IMatrix abstract class (with all matrices operations etc), implemented by a ColumnMatrix class. abstract class IMatrix { public int Rows {get;set;} public int Columns {get;set;} public abstract float At(int row, int column); } class ColumnMatrix : IMatrix { private data[]; public override float At(int row, int column) { return data[row + columns * this.Rows]; } } This class is used a lot across my application, but I'm concerned with performance issues. Testing only read for a 2000000x15 matrix against a jagged array of the same size, I get 1359ms for array access agains 9234ms for matrix access : public void TestAccess() { int iterations = 10; int rows = 2000000; int columns = 15; ColumnMatrix matrix = new ColumnMatrix(rows, columns); for (int i = 0; i < rows; i++) for (int j = 0; j < columns; j++) matrix[i, j] = i + j; float[][] equivalentArray = matrix.ToRowsArray(); TimeSpan totalMatrix = new TimeSpan(0); TimeSpan totalArray = new TimeSpan(0); float total = 0f; for (int iteration = 0; iteration < iterations; iteration++) { total = 0f; DateTime start = DateTime.Now; for (int i = 0; i < rows; i++) for (int j = 0; j < columns; j++) total = matrix.At(i, j); totalMatrix += (DateTime.Now - start); total += 1f; //Ensure total is read at least once. total = total > 0 ? 0f : 0f; start = DateTime.Now; for (int i = 0; i < rows; i++) for (int j = 0; j < columns; j++) total = equivalentArray[i][j]; totalArray += (DateTime.Now - start); } if (total < 0f) logger.Info("Nothing here, just make sure we read total at least once."); logger.InfoFormat("Average time for a {0}x{1} access, matrix : {2}ms", rows, columns, totalMatrix.TotalMilliseconds); logger.InfoFormat("Average time for a {0}x{1} access, array : {2}ms", rows, columns, totalArray.TotalMilliseconds); Assert.IsTrue(true); } So my question : how can I make this thing faster ? Is there any way I can make my ColumnMatrix.At faster ? Cheers !

    Read the article

  • What code in inherit part

    - by FullmetalBoy
    Problem: Having problem to find a source solution (inherit code in view state) to display data from SokningPerformSearchViewModel and its generic list in view state. Questions/request: Need to display data from my viewmodel SokningPerformSearchViewModel and its generic list as a strongly typed (if possible)? This question is a follow-up from my previous question Display a view with many to many relationship // Fullmetalboy namespace BokButik1.ViewModels { public class SokningPerformSearchViewModel { public List<BokSearchResultViewModel> Boksss { get; set; } } } namespace BokButik1.ViewModels { public class BokSearchResultViewModel { public List<Bok> Boks { get; set; } public List<Bok_Forfattare> Bok_Forfattares { get; set; } } } public class SokningController : Controller [AcceptVerbs(HttpVerbs.Post)] public ActionResult PerformSearch(string txtSearch, Kategori kategoriNummer) { Search myTest = new Search(txtSearch, kategoriNummer); SkaparListor mySkaparListor = new SkaparListor(myTest.HamtaBokListaFranSokFunktion(), myIBok_ForfattareRepository.HamtaAllaBok_ForfattareNummer()); var performViewModel = mySkaparListor.RattBokOchForfattarListaTillViewModel(); var SokningIndexViewModel = new SokningPerformSearchViewModel { Boksss = performViewModel }; return View(SokningIndexViewModel); } <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<BokButik1.ViewModels.SokningPerformSearchViewModel>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> PerformSearch </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>PerformSearch</h2> <table> <% foreach (var bok in Model.Boksss) { %> <tr> <td><%: bok.Boks %> av</td> <td rowspan="2"><%: bok.Bok_Forfattares %></td> <td rowspan="2"><div id="Div1"><input type="submit" value="Köp" /></div></td> </tr> <tr> <td></td> </tr> <tr> <td>.. </td> </tr> <% } %> </table> </asp:Content> namespace BokButik1.Models { public class SkaparListor { private List<Bok_Forfattare> _myIBok_ForfattareRepository; private List<Bok> _Bok; private List<BokSearchResultViewModel> _ViewBokSearch; public SkaparListor(List<Bok> pSpecifikBokLista, List<Bok_Forfattare> pBok_ForfattareLista) { _Bok = pSpecifikBokLista; _myIBok_ForfattareRepository = pBok_ForfattareLista; _ViewBokSearch = new List<BokSearchResultViewModel>(); } public List<BokSearchResultViewModel> RattBokOchForfattarListaTillViewModel() { foreach (var a in _Bok) { List<Bok> aaBok = new List<Bok>(); List<Bok_Forfattare> aaBok_Forfattare = new List<Bok_Forfattare>(); BokSearchResultViewModel results = new BokSearchResultViewModel(); aaBok.Add(a); foreach (var b in _myIBok_ForfattareRepository) { if(a.BokID == b.BokID) { aaBok_Forfattare.Add(b); } } results.Boks = aaBok; results.Bok_Forfattares = aaBok_Forfattare; _ViewBokSearch.Add(results); } return _ViewBokSearch; } } // Class }

    Read the article

  • Foolishness Check: PHP Class finds Class file but not Class in the file.

    - by Daniel Bingham
    I'm at a loss here. I've defined an abstract superclass in one file and a subclass in another. I have required the super-classes file and the stack trace reports to find an include it. However, it then returns an error when it hits the 'extends' line: Fatal error: Class 'HTMLBuilder' not found in View/Markup/HTML/HTML4.01/HTML4_01Builder.php on line 7. I had this working with another class tree that uses factories a moment ago. I just added the builder layer in between the factories and the consumer. The factory layer looked almost exactly the same in terms of includes and dependencies. So that makes me think I must have done something silly that's causes the HTMLBuilder.php file to not be included correctly or interpreted correctly or some such. Here's the full stack trace (paths slightly altered): # Time Memory Function Location 1 0.0001 53904 {main}( ) ../index.php:0 2 0.0002 67600 require_once( 'View/Page.php' ) ../index.php:3 3 0.0003 75444 require_once( 'View/Sections/SectionFactory.php' ) ../Page.php:4 4 0.0003 81152 require_once( 'View/Sections/HTML/HTMLSectionFactory.php' ) ../SectionFactory.php:3 5 0.0004 92108 require_once( 'View/Sections/HTML/HTMLTitlebarSection.php' ) ../HTMLSectionFactory.php:5 6 0.0005 99716 require_once( 'View/Markup/HTML/HTMLBuilder.php' ) ../HTMLTitlebarSection.php:3 7 0.0005 103580 require_once( 'View/Markup/MarkupBuilder.php' ) ../HTMLBuilder.php:3 8 0.0006 124120 require_once( 'View/Markup/HTML/HTML4.01/HTML4_01Builder.php' ) ../MarkupBuilder.php:3 Here's the code in question: Parent class (View/Markup/HTML/HTMLBuilder.php): <?php require_once('View/Markup/MarkupBuilder.php'); abstract class HTMLBuilder extends MarkupBuilder { public abstract function getLink($text, $href); public abstract function getImage($src, $alt); public abstract function getDivision($id, array $classes=NULL, array $children=NULL); public abstract function getParagraph($text, array $classes=NULL, $id=NULL); } ?> Child Class, (View/Markup/HTML/HTML4.01/HTML4_01Builder.php): <?php require_once('HTML4_01Factory.php'); require_once('View/Markup/HTML/HTMLBuilder.php'); class HTML4_01Builder extends HTMLBuilder { private $factory; public function __construct() { $this->factory = new HTML4_01Factory(); } public function getLink($href, $text) { $link = $this->factory->getA(); $link->addAttribute('href', $href); $link->addChild($this->factory->getText($text)); return $link; } public function getImage($src, $alt) { $image = $this->factory->getImg(); $image->addAttribute('src', $src); $image->addAttribute('alt', $alt); return $image; } public function getDivision($id, array $classes=NULL, array $children=NULL) { $div = $this->factory->getDiv(); $div->setID($id); if(!empty($classes)) { $div->addClasses($classes); } if(!empty($children)) { $div->addChildren($children); } return $div; } public function getParagraph($text, array $classes=NULL, $id=NULL) { $p = $this->factory->getP(); $p->addChild($this->factory->getText($text)); if(!empty($classes)) { $p->addClasses($classes); } if(!empty($id)) { $p->setID($id); } return $p; } } ?> I would appreciate any and all ideas. I'm at a complete loss here as to what is going wrong. I'm sure it's something stupid I just can't see...

    Read the article

  • Android SQLiteConstraintException: error code 19: constraint failed

    - by Tom D
    I've seen other questions about this exception, but all of them seem to be resolved with the solution that a row with the primary key specified already exists. This doesn't seem to be the case for me. I have tried replacing all single quotes in my strings with double quotes, but the same problem occurs. I'm trying to insert a row into the Settings table of the SQLite database I've created by doing the following: db.execSQL("DROP TABLE IF EXISTS "+Settings.SETTINGS_TABLE_NAME + ";"); db.execSQL(CREATE_MEDIA_TABLE); db.execSQL(CREATE_SETTINGS_TABLE); Cursor c = getAllSettings(); //If there isn't already a settings row, create a row full of defaults if(c.getCount()==0){ ContentValues cv = new ContentValues(); cv.put(Settings.SETTING_UNIQUE_ID, "'"+Settings.uniqueID+"'"); cv.put(Settings.SETTING_DEVICE_ID, Settings.SETTING_DEVICE_ID_DEFAULT); cv.put(Settings.SETTING_CONNECTION_PREFERENCE, Settings.SETTING_CONNECTION_PREFERENCE_DEFAULT); cv.put(Settings.SETTING_AD_HOC_ENABLED, Settings.SETTING_AD_HOC_ENABLED_DEFAULT); cv.put(Settings.SETTING_SERVER_ADDRESS, Settings.SETTING_SERVER_ADDRESS_DEFAULT); cv.put(Settings.SETTING_RECORDING_MODE, Settings.SETTING_RECORDING_MODE_DEFAULT); cv.put(Settings.SETTING_PREVIEW_ENABLED, Settings.SETTING_PREVIEW_ENABLED_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_X, Settings.SETTING_PICTURE_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_Y, Settings.SETTING_PICTURE_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_X, Settings.SETTING_VIDEO_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_Y, Settings.SETTING_VIDEO_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_FPS, Settings.SETTING_VIDEO_FPS_DEFAULT); cv.put(Settings.SETTING_AUDIO_BITRATE_KBPS, Settings.SETTING_AUDIO_BITRATE_KBPS_DEFAULT); cv.put(Settings.SETTING_STORE_TO_SD, Settings.SETTING_STORE_TO_SD_DEFAULT); cv.put(Settings.SETTING_STORAGE_LIMIT_MB, Settings.SETTING_STORAGE_LIMIT_MB_DEFAULT); this.db.insert(Settings.SETTINGS_TABLE_NAME, null, cv); } The CREATE_SETTINGS_TABLE string is defined as the following: private static String CREATE_SETTINGS_TABLE = "CREATE TABLE IF NOT EXISTS " + Settings.SETTINGS_TABLE_NAME + "(" + Settings.SETTING_UNIQUE_ID + " TEXT NOT NULL PRIMARY KEY, " + Settings.SETTING_DEVICE_ID + " TEXT NOT NULL , " + Settings.SETTING_CONNECTION_PREFERENCE + " TEXT NOT NULL CHECK("+Settings.SETTING_CONNECTION_PREFERENCE+" IN("+Settings.SETTING_CONNECTION_PREFERENCE_ALLOWED+")), " + Settings.SETTING_AD_HOC_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_AD_HOC_ENABLED+" IN("+Settings.SETTING_AD_HOC_ENABLED_ALLOWED+")), " + Settings.SETTING_SERVER_ADDRESS + " TEXT NOT NULL, " + Settings.SETTING_RECORDING_MODE + " TEXT NOT NULL CHECK("+Settings.SETTING_RECORDING_MODE+" IN("+Settings.SETTING_RECORDING_MODE_ALLOWED+")), " + Settings.SETTING_PREVIEW_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_PREVIEW_ENABLED+" IN("+Settings.SETTING_PREVIEW_ENABLED_ALLOWED+")), " + Settings.SETTING_PICTURE_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_PICTURE_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_FPS + " TEXT NOT NULL, " + Settings.SETTING_AUDIO_BITRATE_KBPS + " TEXT NOT NULL, " + Settings.SETTING_STORE_TO_SD + " TEXT NOT NULL CHECK("+Settings.SETTING_STORE_TO_SD+" IN("+Settings.SETTING_STORE_TO_SD_ALLOWED+")), " + Settings.SETTING_STORAGE_LIMIT_MB + " TEXT NOT NULL )"; However, when I execute my insert, I always get: 03-19 19:37:36.974: ERROR/Database(386): Error inserting server_address='0.0.0.0' storage_limit='-1' connection='none' preview_enabled='0' sd_enabled='1' video_fps='15' audio_bitrate='96' device_id='-1' recording_mode='none' picture_resolution_x='-1' picture_resolution_y='-1' unique_id='000000000000000' adhoc_enable='0' video_resolution_x='320' video_resolution_y='240' 03-19 19:45:34.284: ERROR/Database(446): android.database.sqlite.SQLiteConstraintException: error code 19: constraint failed It seems as if all the columns in my insert are not null. The row's primary key HAS to be unique, because it's the only row in the table. Therefore, the only thing I can think of is my CHECK conditions aren't true. Here are the predefined strings I'm using: public static final String SETTING_UNIQUE_ID = "unique_id"; public static final String SETTING_DEVICE_ID = "device_id"; public static final String SETTING_DEVICE_ID_DEFAULT = "'-1'"; public static final String SETTING_CONNECTION_PREFERENCE = "connection"; public static final String SETTING_CONNECTION_PREFERENCE_3G = "'3g'"; public static final String SETTING_CONNECTION_PREFERENCE_WIFI = "'wifi'"; public static final String SETTING_CONNECTION_PREFERENCE_NONE = "'none'"; public static final String SETTING_CONNECTION_PREFERENCE_ALLOWED = SETTING_CONNECTION_PREFERENCE_3G+","+SETTING_CONNECTION_PREFERENCE_WIFI+","+SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_CONNECTION_PREFERENCE_DEFAULT = SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_AD_HOC_ENABLED = "adhoc_enable"; public static final String SETTING_AD_HOC_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_AD_HOC_ENABLED_DEFAULT = FALSE; public static final String SETTING_SERVER_ADDRESS = "server_address"; public static final String SETTING_SERVER_ADDRESS_DEFAULT = "'0.0.0.0'"; public static final String SETTING_RECORDING_MODE = "recording_mode"; public static final String SETTING_RECORDING_MODE_VIDEO = "'video'"; public static final String SETTING_RECORDING_MODE_AUDIO = "'audio'"; public static final String SETTING_RECORDING_MODE_PICTURE = "'picture'"; public static final String SETTING_RECORDING_MODE_NONE = "'none'"; public static final String SETTING_RECORDING_MODE_ALLOWED = SETTING_RECORDING_MODE_VIDEO+","+SETTING_RECORDING_MODE_AUDIO+","+SETTING_RECORDING_MODE_PICTURE+","+SETTING_RECORDING_MODE_NONE; public static final String SETTING_RECORDING_MODE_DEFAULT = SETTING_RECORDING_MODE_NONE; public static final String SETTING_PREVIEW_ENABLED = "preview_enabled"; public static final String SETTING_PREVIEW_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_PREVIEW_ENABLED_DEFAULT = FALSE; public static final String SETTING_PICTURE_RESOLUTION_X = "picture_resolution_x"; public static final String SETTING_PICTURE_RESOLUTION_X_DEFAULT = "'-1'"; public static final String SETTING_PICTURE_RESOLUTION_Y = "picture_resolution_y"; public static final String SETTING_PICTURE_RESOLUTION_Y_DEFAULT = "'-1'"; public static final String SETTING_VIDEO_RESOLUTION_X = "video_resolution_x"; public static final String SETTING_VIDEO_RESOLUTION_X_DEFAULT = "'320'"; public static final String SETTING_VIDEO_RESOLUTION_Y = "video_resolution_y"; public static final String SETTING_VIDEO_RESOLUTION_Y_DEFAULT = "'240'"; public static final String SETTING_VIDEO_FPS = "video_fps"; public static final String SETTING_VIDEO_FPS_DEFAULT = "'15'"; public static final String SETTING_AUDIO_BITRATE_KBPS = "audio_bitrate"; public static final String SETTING_AUDIO_BITRATE_KBPS_DEFAULT = "'96'"; public static final String SETTING_STORE_TO_SD = "sd_enabled"; public static final String SETTING_STORE_TO_SD_ALLOWED = TRUE+","+FALSE; public static final String SETTING_STORE_TO_SD_DEFAULT = TRUE; public static final String SETTING_STORAGE_LIMIT_MB = "storage_limit"; public static final String SETTING_STORAGE_LIMIT_MB_DEFAULT = "'-1'"; public static final String SETTING_CLIP_LENGTH_SECONDS = "clip_length"; public static final String SETTING_CLIP_LENGTH_SECONDS_DEFAULT = "'300'"; Does anyone see what could be going on? I'm stumped. Thanks in advance.

    Read the article

  • what is the wrong in this code(openAl in vc++)

    - by maiajam
    hi how are you all? i need your help i have this code #include <conio.h> #include <stdlib.h> #include <stdio.h> #include <al.h> #include <alc.h> #include <alut.h> #pragma comment(lib, "openal32.lib") #pragma comment(lib, "alut.lib") /* * These are OpenAL "names" (or "objects"). They store and id of a buffer * or a source object. Generally you would expect to see the implementation * use values that scale up from '1', but don't count on it. The spec does * not make this mandatory (as it is OpenGL). The id's can easily be memory * pointers as well. It will depend on the implementation. */ // Buffers to hold sound data. ALuint Buffer; // Sources are points of emitting sound. ALuint Source; /* * These are 3D cartesian vector coordinates. A structure or class would be * a more flexible of handling these, but for the sake of simplicity we will * just leave it as is. */ // Position of the source sound. ALfloat SourcePos[] = { 0.0, 0.0, 0.0 }; // Velocity of the source sound. ALfloat SourceVel[] = { 0.0, 0.0, 0.0 }; // Position of the Listener. ALfloat ListenerPos[] = { 0.0, 0.0, 0.0 }; // Velocity of the Listener. ALfloat ListenerVel[] = { 0.0, 0.0, 0.0 }; // Orientation of the Listener. (first 3 elements are "at", second 3 are "up") // Also note that these should be units of '1'. ALfloat ListenerOri[] = { 0.0, 0.0, -1.0, 0.0, 1.0, 0.0 }; /* * ALboolean LoadALData() * * This function will load our sample data from the disk using the Alut * utility and send the data into OpenAL as a buffer. A source is then * also created to play that buffer. */ ALboolean LoadALData() { // Variables to load into. ALenum format; ALsizei size; ALvoid* data; ALsizei freq; ALboolean loop; // Load wav data into a buffer. alGenBuffers(1, &Buffer); if(alGetError() != AL_NO_ERROR) return AL_FALSE; alutLoadWAVFile((ALbyte *)"C:\Users\Toshiba\Desktop\Graduation Project\OpenAL\open AL test\wavdata\FancyPants.wav", &format, &data, &size, &freq, &loop); alBufferData(Buffer, format, data, size, freq); alutUnloadWAV(format, data, size, freq); // Bind the buffer with the source. alGenSources(1, &Source); if(alGetError() != AL_NO_ERROR) return AL_FALSE; alSourcei (Source, AL_BUFFER, Buffer ); alSourcef (Source, AL_PITCH, 1.0 ); alSourcef (Source, AL_GAIN, 1.0 ); alSourcefv(Source, AL_POSITION, SourcePos); alSourcefv(Source, AL_VELOCITY, SourceVel); alSourcei (Source, AL_LOOPING, loop ); // Do another error check and return. if(alGetError() == AL_NO_ERROR) return AL_TRUE; return AL_FALSE; } /* * void SetListenerValues() * * We already defined certain values for the Listener, but we need * to tell OpenAL to use that data. This function does just that. */ void SetListenerValues() { alListenerfv(AL_POSITION, ListenerPos); alListenerfv(AL_VELOCITY, ListenerVel); alListenerfv(AL_ORIENTATION, ListenerOri); } /* * void KillALData() * * We have allocated memory for our buffers and sources which needs * to be returned to the system. This function frees that memory. */ void KillALData() { alDeleteBuffers(1, &Buffer); alDeleteSources(1, &Source); alutExit(); } int main(int argc, char *argv[]) { printf("MindCode's OpenAL Lesson 1: Single Static Source\n\n"); printf("Controls:\n"); printf("p) Play\n"); printf("s) Stop\n"); printf("h) Hold (pause)\n"); printf("q) Quit\n\n"); // Initialize OpenAL and clear the error bit. alutInit(NULL, 0); alGetError(); // Load the wav data. if(LoadALData() == AL_FALSE) { printf("Error loading data."); return 0; } SetListenerValues(); // Setup an exit procedure. atexit(KillALData); // Loop. ALubyte c = ' '; while(c != 'q') { c = getche(); switch(c) { // Pressing 'p' will begin playing the sample. case 'p': alSourcePlay(Source); break; // Pressing 's' will stop the sample from playing. case 's': alSourceStop(Source); break; // Pressing 'h' will pause the sample. case 'h': alSourcePause(Source); break; }; } return 0; } and it is run willbut i cant here any thing also i am new in programong and wont to program a virtual reality sound in my graduation project and start to learn opeal and vc++ but i dont how to start and from where i must begin and i want to ask if i need to learn about API win ?? and if i need how i can learn that thank you alote and i am sorry coz of my english

    Read the article

  • Java code optimization leads to numerical inaccuracies and errors

    - by rano
    I'm trying to implement a version of the Fuzzy C-Means algorithm in Java and I'm trying to do some optimization by computing just once everything that can be computed just once. This is an iterative algorithm and regarding the updating of a matrix, the clusters x pixels membership matrix U, this is the update rule I want to optimize: where the x are the element of a matrix X (pixels x features) and v belongs to the matrix V (clusters x features). And m is a parameter that ranges from 1.1 to infinity. The distance used is the euclidean norm. If I had to implement this formula in a banal way I'd do: for(int i = 0; i < X.length; i++) { int count = 0; for(int j = 0; j < V.length; j++) { double num = D[i][j]; double sumTerms = 0; for(int k = 0; k < V.length; k++) { double thisDistance = D[i][k]; sumTerms += Math.pow(num / thisDistance, (1.0 / (m - 1.0))); } U[i][j] = (float) (1f / sumTerms); } } In this way some optimization is already done, I precomputed all the possible squared distances between X and V and stored them in a matrix D but that is not enough, since I'm cycling througn the elements of V two times resulting in two nested loops. Looking at the formula the numerator of the fraction is independent of the sum so I can compute numerator and denominator independently and the denominator can be computed just once for each pixel. So I came to a solution like this: int nClusters = V.length; double exp = (1.0 / (m - 1.0)); for(int i = 0; i < X.length; i++) { int count = 0; for(int j = 0; j < nClusters; j++) { double distance = D[i][j]; double denominator = D[i][nClusters]; double numerator = Math.pow(distance, exp); U[i][j] = (float) (1f / (numerator * denominator)); } } Where I precomputed the denominator into an additional column of the matrix D while I was computing the distances: for (int i = 0; i < X.length; i++) { for (int j = 0; j < V.length; j++) { double sum = 0; for (int k = 0; k < nDims; k++) { final double d = X[i][k] - V[j][k]; sum += d * d; } D[i][j] = sum; D[i][B.length] += Math.pow(1 / D[i][j], exp); } } By doing so I encounter numerical differences between the 'banal' computation and the second one that leads to different numerical value in U (not in the first iterates but soon enough). I guess that the problem is that exponentiate very small numbers to high values (the elements of U can range from 0.0 to 1.0 and exp , for m = 1.1, is 10) leads to ver y small values, whereas by dividing the numerator and the denominator and THEN exponentiating the result seems to be better numerically. The problem is it involves much more operations. Am I doing something wrong? Is there a possible solution to get both the code optimized and numerically stable? Any suggestion or criticism will be appreciated.

    Read the article

  • Failed to load resource: the server responded with a status of 406 (Not Acceptable)

    - by skip
    I am trying to send json data and get back json data as well. I've <annotation-driven /> configured in my servlet-context.xml and I am using Spring framework version 3.1.0.RELEASE. When I send the request the browser tells me that it is not happy with the data returned from the server and gives me 406 error. And when I see the response from the server I see the whole 406 page returned by tomcat 6 server. I have got following in my pom for Jackson/Jackson processor: <!-- Jackson --> <dependency> <groupId>org.codehaus.jackson</groupId> <artifactId>jackson-core-asl</artifactId> <version>1.9.4</version> </dependency> <dependency> <groupId>org.codehaus.jackson</groupId> <artifactId>jackson-mapper-asl</artifactId> <version>1.9.4</version> </dependency> <dependency> <groupId>org.codehaus.jackson</groupId> <artifactId>jackson-xc</artifactId> <version>1.9.4</version> </dependency> <!-- Jackson JSON Processor --> <dependency> <groupId>org.codehaus.jackson</groupId> <artifactId>jackson-mapper-asl</artifactId> <version>1.8.1</version> </dependency> Following is the jquery code I am using to send the json request: $(function(){$(".sutmit-button").click(function(){ var dataString=$("#app-form").serialize(); $.ajax({ type:"POST", url:"apply.json", data:dataString, success:function(data, textStatus, jqXHR){ console.log(jqXHR.status); console.log(data); $('.postcontent').html("<div id='message'></div>"); $('#message').html("<h3>Request Submitted</h3>").append("<p>Thank you for submiting your request.</p>").hide().fadeIn(1500,function(){$('#message');}); }, error:function(jqXHR, textStatus, errorThrown) { console.log(jqXHR.status); $('.postcontent').html("<div id='message'></div>"); $('#message').html("<h3>Request failed.</h3>").hide().fadeIn(1500,function(){$('#message');}); }, dataType: "json" }); return false;});}); Following is the Controller that is handling the request: @RequestMapping(method = RequestMethod.POST, value="apply", headers="Accept=application/json") public @ResponseBody Application processFranchiseeApplicationForm(HttpServletRequest request) { //... Application application = new Application(...); //... logger.debug(application); return application; } I am not able to figure out the reason why I might be getting this error. Could someone help me understand why am I getting the given error? Thanks.

    Read the article

  • Screen capture code produces black bitmap

    - by wadetandy
    I need to add the ability to take a screenshot of the entire screen, not just the current window. The following code produces a bmp file with the correct dimensions, but the image is completely black. What am I doing wrong? void CaptureScreen(LPCTSTR lpszFilePathName) { BITMAPFILEHEADER bmfHeader; BITMAPINFO *pbminfo; HBITMAP hBmp; FILE *oFile; HDC screen; HDC memDC; int sHeight; int sWidth; LPBYTE pBuff; BITMAP bmp; WORD cClrBits; RECT rcClient; screen = GetDC(0); memDC = CreateCompatibleDC(screen); sHeight = GetDeviceCaps(screen, VERTRES); sWidth = GetDeviceCaps(screen, HORZRES); //GetObject(screen, sizeof(BITMAP), &bmp); hBmp = CreateCompatibleBitmap ( screen, sWidth, sHeight ); // Retrieve the bitmap color format, width, and height. GetObject(hBmp, sizeof(BITMAP), (LPSTR)&bmp) ; // Convert the color format to a count of bits. cClrBits = (WORD)(bmp.bmPlanes * bmp.bmBitsPixel); if (cClrBits == 1) cClrBits = 1; else if (cClrBits bmiHeader.biSize = sizeof(BITMAPINFOHEADER); pbminfo-bmiHeader.biWidth = bmp.bmWidth; pbminfo-bmiHeader.biHeight = bmp.bmHeight; pbminfo-bmiHeader.biPlanes = bmp.bmPlanes; pbminfo-bmiHeader.biBitCount = bmp.bmBitsPixel; if (cClrBits bmiHeader.biClrUsed = (1bmiHeader.biCompression = BI_RGB; // Compute the number of bytes in the array of color // indices and store the result in biSizeImage. // The width must be DWORD aligned unless the bitmap is RLE // compressed. pbminfo-bmiHeader.biSizeImage = ((pbminfo-bmiHeader.biWidth * cClrBits +31) & ~31) /8 * pbminfo-bmiHeader.biHeight; // Set biClrImportant to 0, indicating that all of the // device colors are important. pbminfo-bmiHeader.biClrImportant = 0; CreateBMPFile(lpszFilePathName, pbminfo, hBmp, memDC); } void CreateBMPFile(LPTSTR pszFile, PBITMAPINFO pbi, HBITMAP hBMP, HDC hDC) { HANDLE hf; // file handle BITMAPFILEHEADER hdr; // bitmap file-header PBITMAPINFOHEADER pbih; // bitmap info-header LPBYTE lpBits; // memory pointer DWORD dwTotal; // total count of bytes DWORD cb; // incremental count of bytes BYTE *hp; // byte pointer DWORD dwTmp; int lines; pbih = (PBITMAPINFOHEADER) pbi; lpBits = (LPBYTE) GlobalAlloc(GMEM_FIXED, pbih-biSizeImage); // Retrieve the color table (RGBQUAD array) and the bits // (array of palette indices) from the DIB. lines = GetDIBits(hDC, hBMP, 0, (WORD) pbih-biHeight, lpBits, pbi, DIB_RGB_COLORS); // Create the .BMP file. hf = CreateFile(pszFile, GENERIC_READ | GENERIC_WRITE, (DWORD) 0, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, (HANDLE) NULL); hdr.bfType = 0x4d42; // 0x42 = "B" 0x4d = "M" // Compute the size of the entire file. hdr.bfSize = (DWORD) (sizeof(BITMAPFILEHEADER) + pbih-biSize + pbih-biClrUsed * sizeof(RGBQUAD) + pbih-biSizeImage); hdr.bfReserved1 = 0; hdr.bfReserved2 = 0; // Compute the offset to the array of color indices. hdr.bfOffBits = (DWORD) sizeof(BITMAPFILEHEADER) + pbih-biSize + pbih-biClrUsed * sizeof (RGBQUAD); // Copy the BITMAPFILEHEADER into the .BMP file. WriteFile(hf, (LPVOID) &hdr, sizeof(BITMAPFILEHEADER), (LPDWORD) &dwTmp, NULL); // Copy the BITMAPINFOHEADER and RGBQUAD array into the file. WriteFile(hf, (LPVOID) pbih, sizeof(BITMAPINFOHEADER) + pbih-biClrUsed * sizeof (RGBQUAD), (LPDWORD) &dwTmp, ( NULL)); // Copy the array of color indices into the .BMP file. dwTotal = cb = pbih-biSizeImage; hp = lpBits; WriteFile(hf, (LPSTR) hp, (int) cb, (LPDWORD) &dwTmp,NULL); // Close the .BMP file. CloseHandle(hf); // Free memory. GlobalFree((HGLOBAL)lpBits); }

    Read the article

  • Using CreateSourceQuery in CTP4 Code First

    - by Adam Rackis
    I'm guessing this is impossible, but I'll throw it out there anyway. Is it possible to use CreateSourceQuery when programming with the EF4 CodeFirst API, in CTP4? I'd like to eagerly load properties attached to a collection of properties, like this: var sourceQuery = this.CurrentInvoice.PropertyInvoices.CreateSourceQuery(); sourceQuery.Include("Property").ToList(); But of course CreateSourceQuery is defined on EntityCollection<T>, whereas CodeFirst uses plain old ICollection (obviously). Is there some way to convert? I've gotten the below to work, but it's not quite what I'm looking for. Anyone know how to go from what's below to what's above (code below is from a class that inherits DbContext)? ObjectSet<Person> OSPeople = base.ObjectContext.CreateObjectSet<Person>(); OSPeople.Include(Pinner => Pinner.Books).ToList(); Thanks! EDIT: here's my version of the solution posted by zeeshanhirani - who's book by the way is amazing! dynamic result; if (invoice.PropertyInvoices is EntityCollection<PropertyInvoice>) result = (invoices.PropertyInvoices as EntityCollection<PropertyInvoice>).CreateSourceQuery().Yadda.Yadda.Yadda else //must be a unit test! result = invoices.PropertyInvoices; return result.ToList(); EDIT2: Ok, I just realized that you can't dispatch extension methods whilst using dynamic. So I guess we're not quite as dynamic as Ruby, but the example above is easily modifiable to comport with this restriction EDIT3: As mentioned in zeeshanhirani's blog post, this only works if (and only if) you have change-enabled proxies, which will get created if all of your properties are declared virtual. Here's another version of what the method might look like to use CreateSourceQuery with POCOs public class Person { public virtual int ID { get; set; } public virtual string FName { get; set; } public virtual string LName { get; set; } public virtual double Weight { get; set; } public virtual ICollection<Book> Books { get; set; } } public class Book { public virtual int ID { get; set; } public virtual string Title { get; set; } public virtual int Pages { get; set; } public virtual int OwnerID { get; set; } public virtual ICollection<Genre> Genres { get; set; } public virtual Person Owner { get; set; } } public class Genre { public virtual int ID { get; set; } public virtual string Name { get; set; } public virtual Genre ParentGenre { get; set; } public virtual ICollection<Book> Books { get; set; } } public class BookContext : DbContext { public void PrimeBooksCollectionToIncludeGenres(Person P) { if (P.Books is EntityCollection<Book>) (P.Books as EntityCollection<Book>).CreateSourceQuery().Include(b => b.Genres).ToList(); }

    Read the article

  • Rewrite C++ code into Objective C

    - by Phil_M
    Hello I got some C++ Sourcecode that I would like to rewrite into Objective C. It would help me alot if someone could write me a header file for this Code. When I get the Headerfile I would be able to rewrite the rest of the Sourcecode. It would be very nice if someone could help me please. Thanks I will poste the sourcecode here: #include <stdlib.h> #include <iostream.h> #define STATES 5 int transitionTable[STATES][STATES]; // function declarations: double randfloat (void); int chooseNextEventFromTable (int current, int table[STATES][STATES]); int chooseNextEventFromTransitionTablee (int currentState); void setTable (int value, int table[STATES][STATES]); ////////////////////////////////////////////////////////////////////////// int main(void) { int i; // for demo purposes: transitionTable[0][0] = 0; transitionTable[0][1] = 20; transitionTable[0][2] = 30; transitionTable[0][3] = 50; transitionTable[0][4] = 0; transitionTable[1][0] = 35; transitionTable[1][1] = 25; transitionTable[1][2] = 20; transitionTable[1][3] = 30; transitionTable[1][4] = 0; transitionTable[2][0] = 70; transitionTable[2][1] = 0; transitionTable[2][2] = 15; transitionTable[2][3] = 0; transitionTable[2][4] = 15; transitionTable[3][0] = 0; transitionTable[3][1] = 25; transitionTable[3][2] = 25; transitionTable[3][3] = 0; transitionTable[3][4] = 50; transitionTable[4][0] = 13; transitionTable[4][1] = 17; transitionTable[4][2] = 22; transitionTable[4][3] = 48; transitionTable[4][4] = 0; int currentState = 0; for (i=0; i<10; i++) { std::cout << currentState << " "; currentState = chooseNextEventFromTransitionTablee(currentState); } return 0; }; ////////////////////////////////////////////////////////////////////////// ////////////////////////////// // // chooseNextEventFromTransitionTable -- choose the next note. // int chooseNextEventFromTransitionTablee(int currentState) { int targetSum = 0; int sum = 0; int targetNote = 0; int totalevents = 0; int i; currentState = currentState % STATES; // remove any octave value for (i=0; i<STATES; i++) { totalevents += transitionTable[currentState][i]; } targetSum = (int)(randfloat() * totalevents + 0.5); while (targetNote < STATES && sum+transitionTable[currentState][targetNote] < targetSum) { sum += transitionTable[currentState][targetNote]; targetNote++; } return targetNote; } ////////////////////////////// // // randfloat -- returns a random number between 0.0 and 1.0. // double randfloat(void) { return (double)rand()/RAND_MAX; } ////////////////////////////// // // setTable -- set all values in the transition table to the given value. // void setTable(int value, int table[STATES][STATES]) { int i, j; for (i=0; i<STATES; i++) { for (j=0; j<STATES; j++) { table[i][j] = value; } } }

    Read the article

  • count specific things within a code in c++

    - by shap
    can anyone help me make this more generalised and more pro? #include <fstream> #include <iostream> #include <string> #include <vector> using namespace std; int main() { // open text file for input: string file_name; cout << "please enter file name: "; cin >> file_name; // associate the input file stream with a text file ifstream infile(file_name.c_str()); // error checking for a valid filename if ( !infile ) { cerr << "Unable to open file " << file_name << " -- quitting!\n"; return( -1 ); } else cout << "\n"; // some data structures to perform the function vector<string> lines_of_text; string textline; // read in text file, line by while (getline( infile, textline, '\n' )) { // add the new element to the vector lines_of_text.push_back( textline ); // print the 'back' vector element - see the STL documentation cout << lines_of_text.back() << "\n"; } cout<<"OUTPUT BEGINS HERE: "<<endl<<endl; cout<<"the total capacity of vector: lines_of_text is: "<<lines_of_text.capacity()<<endl; int PLOC = (lines_of_text.size()+1); int numbComments =0; int numbClasses =0; cout<<"\nThe total number of physical lines of code is: "<<PLOC<<endl; for (int i=0; i<(PLOC-1); i++) //reads through each part of the vector string line-by-line and triggers if the //it registers the "//" which will output a number lower than 100 (since no line is 100 char long and if the function does not //register that character within the string, it outputs a public status constant that is found in the class string and has a huge value //alot more than 100. { string temp(lines_of_text [i]); if (temp.find("//")<100) numbComments +=1; } cout<<"The total number of comment lines is: "<<numbComments<<endl; for (int j=0; j<(PLOC-1); j++) { string temp(lines_of_text [j]); if (temp.find("};")<100) numbClasses +=1; } cout<<"The total number of classes is: "<<numbClasses<<endl;

    Read the article

  • Runtime error in C code (strange double conversion)

    - by Miro Hassan
    I have a strange runtime error in my C code. The Integers comparison here works fine. But in the Decimals comparison, I always get that the second number is larger than the first number, which is false. I am pretty new to C and programming in general, so this is a complex application to me. #include <stdio.h> #include <stdbool.h> #include <stdlib.h> int choose; long long neLimit = -1000000000; long long limit = 1000000000; bool big(a,b) { if ((a >= limit) || (b >= limit)) return true; else if ((a <= neLimit) || (b <= neLimit)) return true; return false; } void largerr(a,b) { if (a > b) printf("\nThe First Number is larger ..\n"); else if (a < b) printf("\nThe Second Number is larger ..\n"); else printf("\nThe Two Numbers are Equal .. \n"); } int main() { system("color e && title Numbers Comparison && echo off && cls"); start:{ printf("Choose a Type of Comparison :\n\t1. Integers\n\t2. Decimals \n\t\t I Choose Number : "); scanf("%i", &choose); switch(choose) { case 1: goto Integers; break; case 2: goto Decimals; break; default: system("echo Please Choose a Valid Option && pause>nul && cls"); goto start; } } Integers: { system("title Integers Comparison && cls"); long x , y; printf("\nFirst Number : \t"); scanf("%li", &x); printf("\nSecond Number : "); scanf("%li", &y); if (big(x,y)) { printf("\nOut of Limit .. Too Big Numbers ..\n"); system("pause>nul && cls") ; goto Integers; } largerr(x,y); printf("\nFirst Number : %li\nSecond Number : %li\n",x,y); goto exif; } Decimals: { system("title Decimals Comparison && cls"); double x , y; printf("\nFirst Number : \t"); scanf("%le", &x); printf("\nSecond Number : "); scanf("%le", &y); if (big(x,y)) { printf("\nOut of Limit .. Too Big Numbers ..\n"); system("pause>nul && cls") ; goto Decimals; } largerr(x,y); goto exif; } exif:{ system("pause>nul"); system("cls"); main(); } }

    Read the article

  • Problems with this code?

    - by J4C3N-14
    I'm trying to use this code which is an example taken from here https://gist.github.com/2383248 , but it is coming up with a error on the public void onClick which is Multiple markers at this line - implements android.view.View.OnClickListener.onClick - Syntax error, insert "}" to complete MethodBody, but when I add the brace it just throws another error after many tries and fails of different suggestions and ideas. It may be a syntax error and bad coding from me (just started learning to program) but does anyone have any ideas how to resolve this or point me in the right direction I would be very grateful. public class ICSCalendarActivity extends Activity implements View.OnClickListener{ Button button1; int year1; int month1; int day1; int ShiftPattern; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); button1 = (Button)findViewById(R.id.openButton); button1.setText("open"); button1.setOnClickListener(this); Bundle extras = getIntent().getExtras(); year1 = extras.getInt("year1"); day1 = extras.getInt("day1"); month1 = extras.getInt("month1"); ShiftPattern = extras.getInt("ShiftPattern"); } public void onClick(View v){ private static void addToCalendar(Context ICSCalendarActivity, final String title, final long dtstart, final long dtend) { final ContentResolver cr = ICSCalendarActivity.getContentResolver(); Cursor cursor ; if (Integer.parseInt(Build.VERSION.SDK) >= 8 ) cursor = cr.query(Uri.parse("content://com.android.calendar/calendars"), new String[]{ "_id", "displayname" }, null, null, null); else cursor = cr.query(Uri.parse("content://calendar/calendars"), new String[]{ "_id", "displayname" }, null, null, null); if ( cursor.moveToFirst() ) { final String[] calNames = new String[cursor.getCount()]; final int[] calIds = new int[cursor.getCount()]; for (int i = 0; i < calNames.length; i++) { calIds[i] = cursor.getInt(0); calNames[i] = cursor.getString(1); cursor.moveToNext(); } AlertDialog.Builder builder = new AlertDialog.Builder(ICSCalendarActivity); builder.setSingleChoiceItems(calNames, -1, new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { ContentValues cv = new ContentValues(); cv.put("calendar_id", calIds[which]); cv.put("title", title); cv.put("dtstart", dtstart ); cv.put("hasAlarm", 1); cv.put("dtend", dtend); Uri newEvent ; if (Integer.parseInt(Build.VERSION.SDK) >= 8 ) newEvent = cr.insert(Uri.parse("content://com.android.calendar/events"), cv); else newEvent = cr.insert(Uri.parse("content://calendar/events"), cv); if (newEvent != null) { long id = Long.parseLong( newEvent.getLastPathSegment() ); ContentValues values = new ContentValues(); values.put( "event_id", id ); values.put( "method", 1 ); values.put( "minutes", 15 ); // 15 minutes if (Integer.parseInt(Build.VERSION.SDK) >= 8 ) cr.insert( Uri.parse( "content://com.android.calendar/reminders" ), values ); else cr.insert( Uri.parse( "content://calendar/reminders" ), values ); } dialog.cancel(); } }); builder.create().show(); } cursor.close(); } } Thank you.

    Read the article

  • Exception with RubyAMF and Ruby 1.9 although code works

    - by Tam
    I'm getting an exception with RubyAMF using Ruby 1.9 and Rails 2.3.5. Although code afterward executes normally I'm not very comfortable with seeing such exception in the log file. Do you know what is causing it: >>>>>>>> RubyAMF >>>>>>>>> #<RubyAMF::Actions::PrepareAction:0x0000010139ff48> took: 0.00020 secs >>>>>>>> RubyAMF >>>>>>>>> #<RubyAMF::Actions::RailsInvokeAction:0x0000010139ff10> took: 0.29973 secs You have a nil object when you didn't expect it! You might have expected an instance of Array. The error occurred while evaluating nil.include? /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/attribute_methods.rb:142:in `create_time_zone_conversion_attribute?' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/attribute_methods.rb:75:in `block in define_attribute_methods' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/attribute_methods.rb:71:in `each' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/attribute_methods.rb:71:in `define_attribute_methods' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/attribute_methods.rb:242:in `method_missing' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/base.rb:2832:in `hash' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:366:in `hash' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:366:in `hash' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:366:in `[]=' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:366:in `store_object' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:234:in `write_amf3_object' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:154:in `write_amf3' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:78:in `write' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:70:in `block in run' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:56:in `upto' /Users/tammam56/lal/vendor/plugins/ruby_amf/io/amf_serializer.rb:56:in `run' /Users/tammam56/lal/vendor/plugins/ruby_amf/app/filters.rb:91:in `block in run' /Users/tammam56/.rvm/rubies/ruby-1.9.1-p378/lib/ruby/1.9.1/benchmark.rb:309:in `realtime' /Users/tammam56/lal/vendor/plugins/ruby_amf/app/filters.rb:91:in `run' /Users/tammam56/lal/vendor/plugins/ruby_amf/app/filters.rb:12:in `block in run' /Users/tammam56/lal/vendor/plugins/ruby_amf/app/filters.rb:11:in `each' /Users/tammam56/lal/vendor/plugins/ruby_amf/app/filters.rb:11:in `run' /Users/tammam56/lal/vendor/plugins/ruby_amf/app/rails_gateway.rb:28:in `service' /Users/tammam56/lal/app/controllers/rubyamf_controller.rb:19:in `gateway' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/base.rb:1331:in `perform_action' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/filters.rb:617:in `call_filters' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/filters.rb:610:in `perform_action_with_filters' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `block in perform_action_with_benchmark' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `block in ms' /Users/tammam56/.rvm/rubies/ruby-1.9.1-p378/lib/ruby/1.9.1/benchmark.rb:309:in `realtime' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activesupport-2.3.5/lib/active_support/core_ext/benchmark.rb:17:in `ms' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/benchmarking.rb:68:in `perform_action_with_benchmark' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/rescue.rb:160:in `perform_action_with_rescue' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/flash.rb:146:in `perform_action_with_flash' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/base.rb:532:in `process' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/filters.rb:606:in `process_with_filters' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/base.rb:391:in `process' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/base.rb:386:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/routing/route_set.rb:437:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:87:in `dispatch' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:121:in `_call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:130:in `block in build_middleware_stack' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:29:in `block in call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/query_cache.rb:34:in `cache' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in `cache' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/head.rb:9:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/methodoverride.rb:24:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/params_parser.rb:15:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/session/cookie_store.rb:93:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/failsafe.rb:26:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/lock.rb:11:in `block in call' <internal:prelude>:8:in `synchronize' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:114:in `block in call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/reloader.rb:34:in `run' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:108:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rails-2.3.5/lib/rails/rack/static.rb:31:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/urlmap.rb:46:in `block in call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in `each' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/urlmap.rb:40:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rails-2.3.5/lib/rails/rack/log_tailer.rb:17:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/content_length.rb:13:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/chunked.rb:15:in `call' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/rack-1.0.1/lib/rack/handler/mongrel.rb:64:in `process' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/mongrel-1.1.5/lib/mongrel.rb:159:in `block in process_client' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/mongrel-1.1.5/lib/mongrel.rb:158:in `each' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/mongrel-1.1.5/lib/mongrel.rb:158:in `process_client' /Users/tammam56/.rvm/gems/ruby-1.9.1-p378/gems/mongrel-1.1.5/lib/mongrel.rb:285:in `block (2 levels) in run '

    Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >