Search Results

Search found 28439 results on 1138 pages for '10 1 3 4 1'.

Page 217/1138 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

  • How to display certain lines from a text file in Linux?

    - by Boaz
    Hi, I guess everyone knows the useful Linux cmd line utilities head and tail. Head allows you to print the first X lines of a file, tail does the same but prints the end of the file. What is a good command to print the middle of a file? something like middle --start 10000000 --count 20 (print the 10,000,000th till th 10,000,010th lines). I'm looking for something that will deal with large files efficiently. I tried tail -n 10000000 | head 10 and it's horrifically slow. Thanks, Boaz

    Read the article

  • replacing 3 Cisco Catalyst 4500

    - by hoberion
    Our network supplier recommends replacing our 3 cisco catalyst 4500's because they are EOL and dont speak OSPF (which we really want) Its not my area of expertise so I cant say for sure if we really need to replace these units but for my company the estimated costs of 250K euro is a huge problem. Is there any way to cut down on costs (without moving from cisco devices), I heard the 4500´s can speak ospf but would need an upgrade of sorts? edit: version: IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9K91S-M), Version 12.2(20)EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) supervisor: WS-X4013+ Cisco Catalyst 4500 Series Supervisor Engine II-Plus density: WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4306-GB Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45) WS-X4548-GB-RJ45 Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)

    Read the article

  • Connect to wired and wireless networks at same time, Ubuntu

    - by Gary Chambers
    Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

    Read the article

  • Microsoft Office "Read-only" warning not appearing on Samba shares on Mac OS X Server

    - by bongo
    Hi, some of my users don't get the "read-only" warning (but "read-only" does appear on the title bar and the document is indeed opened read-only) when opening Office 2007 documents already opened by another user. We run the samba share off an XSan volume under Mac OS X 10.5.8 Server. Strict locking is on but oplocks are off (from Server Admin). At home, with a simple samba share in 10.6.3 server, it works correctly. Any ideas? or is this a 10.5.8 behavior?

    Read the article

  • Routing and Remote access rule not being applied internally (Windows SBS)

    - by Tim Saunders
    Hi, I have a Microsoft Small Business Server. I have pointed an external domain name to the external fixed IP address for the server. In routing and remote access I have defined a service for our subversion server as follows: Incoming port: 8443 Private address: 192.168.10.5 Outgoing port: 8443 192.168.10.5 is our development server, not the SBS (which is at 192.168.10.1) This rule works correctly if I am not on our internal network. However if I am on the internal network this rule does not get applied. What can I do/set so this rule is applied both internally and externally (so users with laptops et, don't keep having to change the URL by which they access the subversion server) Not sure what other info you may need, so please let me know if more details are required. T

    Read the article

  • Packets marked by iptables only sent to the correct routing table sometimes

    - by cookiecaper
    I am trying to route packets generated by a specific user out over a VPN. I have this configuration: $ sudo iptables -S -t nat -P PREROUTING ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A POSTROUTING -o tun0 -j MASQUERADE $ sudo iptables -S -t mangle -P PREROUTING ACCEPT -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A OUTPUT -m owner --uid-owner guy -j MARK --set-xmark 0xb/0xffffffff $ sudo ip rule show 0: from all lookup local 32765: from all fwmark 0xb lookup 11 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table 11 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 10.8.0.6 dev tun0 scope link 10.8.0.1 via 10.8.0.5 dev tun0 0.0.0.0/1 via 10.8.0.5 dev tun0 $ sudo iptables -S -t raw -P PREROUTING ACCEPT -P OUTPUT ACCEPT -A OUTPUT -m owner --uid-owner guy -j TRACE -A OUTPUT -p tcp -m tcp --dport 80 -j TRACE It seems that some sites work fine and use the VPN, but others don't and fall back to the normal interface. This is bad. This is a packet trace that used VPN: Oct 27 00:24:28 agent kernel: [612979.976052] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976105] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976164] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976210] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976269] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976320] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976367] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976414] TRACE: nat:POSTROUTING:rule:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb and this is one that didn't: Oct 27 00:22:41 agent kernel: [612873.662559] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662609] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662664] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662709] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662761] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662808] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662855] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb I have already tried "ip route flush cache", to no avail. I do not know why the first packet goes through the correct routing table, and the second doesn't. Both are marked. Once again, I do not want ALL packets system-wide to go through the VPN, I only want packets from a specific user (UID=999) to go through the VPN. I am testing ipchicken.com and walmart.com via links, from the same user, same shell. walmart.com appears to use the VPN; ipchicken.com does not. Any help appreciated. Will send 0.5 bitcoins to answerer who makes this fixed.

    Read the article

  • Laptop windows 7 power settings - screen display goes black after 1 minute

    - by Puneet Dudeja
    My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

    Read the article

  • Cisco ASA 5505 (8.05): asymmetrical group-policy filter on an L2L IPSec tunnel

    - by gravyface
    I'm trying to find a way to setup a bi-directional L2L IPSec tunnel, but with differing group-policy filter ACLs for both sides. I have the following filter ACL setup, applied, and working on my tunnel-group: access-list ACME_FILTER extended permit tcp host 10.0.0.254 host 192.168.0.20 eq 22 access-list ACME_FILTER extended permit icmp host 10.0.0.254 host 192.168.0.20 According to the docs, VPN filters are bi-directional, you always specify the remote host first (10.0.0.254), followed by the local host and (optionally) port number, as per the documentation. However, I do not want the remote host to be able to access my local host's TCP port 22 (SSH) because there's no requirement to do so -- there's only a requirement for my host to access the remote host's SFTP server, not vice-versa. But since these filter ACLs are bidirectional, line 1 is also permitting the remote host to access my host's SSH Server. The documentation I'm reading doesn't seem to clear to me if this is possible; help/clarification much appreciated.

    Read the article

  • Is there no such thing as a Gigabit switch?

    - by Torben Gundtofte-Bruun
    According to the manufacturer specification, even my rather plain desktop computer has "Gigabit Ethernet". So when I want to copy large files over the LAN (not Internet) it would make sense to have a gigabit switch. I'm searching eBay for a gigabit switch for a planned home network upgrade. The products I find are all labeled "gigabit" but they all have 24 x 10/100Mbit autosensing ports and sometimes 2 x 10/100/1000Mbit autosensing ports. It was my understanding that 10/100 is ancient and that modern computers have network interfaces that work with 1000Mbit, so it would make sense to get a switch that has 24 x 1000Mbit ports. Did I misunderstand, or are sellers (deliberately?) mislabeling older hardware? (Let's not dive into wired vs. wireless networks and how "N" wireless is fast. You'd be right, but not answering the question.)

    Read the article

  • how to? 1 domain name, 1 ISP Static IP, 1 router, 3 physical web Servers

    - by buliwyf
    I have 1 Static IP from my ISP, 58.59.60.61 I have 3 local physical web servers: Win2008 IIS 7, local IP 192.168.10.11, mydomain.com Ubuntu Apache2, local IP 192.168.10.12, subdomain1.mydomain.com Win2003 IIS 6, local IP 192.168.10.13, subdomain2.mydomain.com I have 1 domain name, mydomain.com. It is configured this way: Host(A), @, 58.59.60.61 Host(A), subdomain1, 58.59.60.61 Host(A), subdomain2, 58.59.60.61 My router is a pfSense box. It forwards all port 80 traffic to a group alias called "WebServers," which is my 3 web server IP's. This setup should work right? I believe I need to set the "host header names" in my web servers. In IIS I know how to do this. How do I do this in Apache2?

    Read the article

  • Connect to wired and wireless networks at same time, Ubuntu

    - by Gary Chambers
    Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

    Read the article

  • How much the distance and ms can affect on the download speed ?

    - by Prix
    Let's consider A (client) and B (server) where A makes download from B. How much can a bad routing from A to B affect the download speed ? For example A does a tracert to B and get a response of 10 steps where the avg ms is around 300 with 10% packet loss at the 4 step and when the connection is normal the avg from A to B is 10 ~ 30 ms. Could this sort of impact reduce A download speed drasticaly or as long as both side and routes have enough link for the full speed of A from B and vice-versa it should maintain the same speed ? Besides tracert and the ping analyse of A to B what else is used to identify the problem ? If you need extra information please let me know.

    Read the article

  • How Do I Schedule Cron to Run at Specific intervals?

    - by Russ
    I have 6 scripts that each take about 20 minutes to run, I want to schedule cron to run the first 3 at 00, 20, and 40 on the odd hours and the second 3 at the same intervals on the even hours. How can I tell cron to do this? is it something like this: 0 2,4,6,8,10,12,14,16,18,20,22,24 * * * root Script1 20 2,4,6,8,10,12,14,16,18,20,22,24 * * * root Script2 40 2,4,6,8,10,12,14,16,18,20,22,24 * * * root Script3 0 1,3,5,7,9,11,13,17,19,21,23 * * * root Script4 20 1,3,5,7,9,11,13,17,19,21,23 * * * root Script5 40 1,3,5,7,9,11,13,17,19,21,23 * * * root Script6

    Read the article

  • SCP command Clarification

    - by david.colais
    I'm using the scp commands to pull some files from the remote server and one variation of the command is not working. I have 2 files names one.xml and two.xml in a remote server and I'm pulling these two files into the current dir using the following command: scp [email protected]:/student/class/Intermediate/one.xml . scp [email protected]:/student/class/Intermediate/two.xml . The above command works fine but if I use wildcards to pull all the xml files in a single shot as shown below it returns scp: No match. scp [email protected]:/student/class/Intermediate/*.xml . Why is it working if I pull the files individually and not working if I try to pull using wildcards.

    Read the article

  • Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

    - by ale
    I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

    Read the article

  • How to use wget with an input file and filenames

    - by Matt
    i have a text file that contains 10,000 url's with a unique number i want to save the file as. Each line has a 10 character code, then the URL of the image to retrieve. How can I make the input file use the first 10 characters as the wget filename? this is an example of the input file: input.txt x100083590http://image.allmusic.com/13/adg/cov200/drt200/t291/t29123q8m19.jpg b200149548http://ecx.images-amazon.com/images/I/41DoH%2BAWKEL.jpg z100151855http://image.allmusic.com/13/amg/cov200/dri400/i450/i45035hxdrb.jpg p400171646http://ecx.images-amazon.com/images/I/61cH4n34IhL.jpg wget -i input.txt would get the file but not with the preceding unique number. I want t29123q8m19.jpg (the first line) to be saved as x100083590.jpg If there is a better way to write out the input file, say with the URL first, then I can do that too, but I will never know the length of the first field. Right now the first 10 characters will always be what I want to save the wget image as. Edit This is being done in a windows environment.

    Read the article

  • Large keepalive_requests values are severely slowing-down Nginx

    - by Gil
    When running a bacon (43-byte transparent pixel) load test on Nginx, we have tried several keepalive_requests values (from 10 to 100,000) and the optimal value seems to be 10. Here are the server HTTP headers of this tiny reply: HTTP/1.1 200 OK Server: nginx/1.5.6 Date: Wed, 23 Oct 2013 12:39:45 GMT Content-Type: image/gif Content-Length: 43 Last-Modified: Mon, 28 Sep 1970 06:00:00 GMT Connection: keep-alive Nginx is twice slower with keepalive_requests 100000 than with keepalive_requests 10. Can you help understanding that result? Or tell what we do wrong? For reference, here is the nginx.conf file.

    Read the article

  • Retrieving a specific value from "df -h" using shell

    - by Diego Dias
    When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath 11T 8.4T 2.1T 81% /storage4 10.11.0.101:/somepath 15T 8.9T 5.9T 61% /storage1 /dev/mapper/patha 5.0T 255G 4.8T 5% /storage5_vol0 /dev/mapper/pathb 5.0T 195G 4.9T 4% /storage5_vol1 /dev/mapper/pathc 5.0T 608G 4.5T 12% /storage5_vol2 I want to write a script that gets the value of Avail column on a specific storage. I used to use df -k /storage_name | tail -1 | awk '{print $3}' But the FileSystem column can have a value or not .. which would change the variable of my script from $3 to $4. How can I get the Avail on a single command line even if there are no values on the previous columns?

    Read the article

  • Cisco IOS router config -- how to disable SSH / SNMP on all but loopback address?

    - by chris
    Sorry for the naive question; a quick reading of the cisco docs doesn't answer this question... So I've got a router (say for the sake of argument a 4500 running IOS 15.x) It has interfaces in 3 different subnets -- 10.0.0.1/24, 10.0.1.1/24, and 10.0.2.1/24 It also has a loopback address of 172.16.0.33 How do I make it so that SSH / SNMP and other administrative traffic works on the 172 address but doesn't work on the IP addresses I wish to only use for L3 forwarding? Ideally this can be done by disabling the control plane access to these interfaces not just by using an ACL, but whatever, I don't actually care that much as long as it works... Thanks!

    Read the article

  • once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

    - by Sean
    I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

    Read the article

  • Various problems with software raid1 array built with Samsung 840 Pro SSDs

    - by Andy B
    I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

    Read the article

  • SPF record doesn't work (not sure which DNS server to tweak)

    - by Ion
    Problem: Google (and perhaps others) marks our emails as SPF neutral. Let me give you some background about the setup: initially got a dedicated server (Hetzner) with Plesk installed to host a domain/web application, let's say: bigjaws.com. Plesk automatically creates a DNS zone for it with some records for the various services it provides out of the box, e.g. webmail.bigjaws.com as a CNAME to bigjaws.com to provide Horde/whatever, etc. Let me point out four relevant of these records (where XXX.XXX.XXX.158 is our dedicated IP): bigjaws.com. A XXX.XXX.XXX.158 mail.bigjaws.com. A XXX.XXX.XXX.158 bigjaws.com MX (10) mail.bigjaws.com. bigjaws.com. TXT v=spf1 +a +mx -all The above records are not(?) valid anymore though, because after using this dedicated server for a while, our site got bigger and bigger so we decided to move our operations over to AWS (EC2, RDS, ELB, etc), but we retained the mail functionality as is, i.e. emails from [email protected] are sent by connecting to our dedicated server where Plesk takes care of things. This was decided in order not to setup anything from scratch. Of course for all DNS-related things we now use Route53. In Route53 I have the following records: mail.schoox.com. A XXX.XXX.XXX.158 bigjaws.com. MX (10) mail.bigjaws.com bigjaws.com. SPF "v=spf1 +ip4:XXX.XXX.XXX.158 +mx ~all" From my understanding of SPF, the SPF status should have been passed: I designate that all email being sent by bigjaws.com from XXX.XXX.XXX.158 are valid/not spam (I added +mx there but I'm not sure if needed). When a mail server receives an email, doesn't it lookup the SPF record of the domain and checks against the IP it got the email from? Checking with spfquery: root@box:~# spfquery -ip XXX.XXX.XXX.158 -sender [email protected] -rcpt-to [email protected] StartError Context: Failed to query MAIL-FROM ErrorCode: (2) Could not find a valid SPF record Error: No DNS data for 'bigjaws.com'. EndError noneneutral Please see http://www.openspf.org/Why?id=employee1%40bigjaws.com&ip=XXX.XXX.XXX.158&receiver=spfquery : Reason: default spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com Received-SPF: neutral (spfquery: XXX.XXX.XXX.158 is neither permitted nor denied by domain of bigjaws.com) client-ip=XXX.XXX.XXX.158; [email protected]; If I go to the address listed above (openspf.org) it tells me that the message should have been accepted(!): spfquery rejected a message that claimed an envelope sender address of [email protected]. spfquery received a message from static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) that claimed an envelope sender address of [email protected]. The domain bigjaws.com has authorized static.158.XXX.XXX.XXX.clients.your-server.de (XXX.XXX.XXX.158) to send mail on its behalf, so the message should have been accepted. It is impossible for us to say why it was rejected. What should I do? If the problem persists, contact the bigjaws.com postmaster. Also, here are some headers from an email sent by one of our [email protected] addresses to a gmail.com address (by the way, bigjaws.de listed in the "Received: from" field was the initial domain hosted on the dedicated server before adding the .com one -- both are still listed as separate subscriptions under Plesk). Delivered-To: [email protected] Received: by 10.14.177.70 with SMTP id c46csp289656eem; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) X-Received: by 10.14.102.66 with SMTP id c42mr306186eeg.47.1382515860386; Wed, 23 Oct 2013 01:11:00 -0700 (PDT) Return-Path: <[email protected]> Received: from bigjaws.de (static.158.XXX.XXX.XXX.clients.your-server.de. [XXX.XXX.XXX.158]) by mx.google.com with ESMTPS id l4si19438578eew.161.2013.10.23.01.10.59 for <[email protected]> (version=TLSv1 cipher=RC4-SHA bits=128/128); Wed, 23 Oct 2013 01:10:59 -0700 (PDT) Received-SPF: neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=XXX.XXX.XXX.158; Authentication-Results: mx.google.com; spf=neutral (google.com: XXX.XXX.XXX.158 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=bigjaws.com; b=WwRAS0WKjp9lO17iMluYPXOHzqRcOueiQT4rPdvy3WFf0QzoXiy6rLfxU/Ra53jL1vlPbwlLNa5gjoJBi7ZwKfUcvs3s02hJI7b3ozl0fEgJtTPKoCfnwl4bLPbtXNFu; h=Received:Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:Content-Type:Content-Transfer-Encoding; Received: (qmail 22722 invoked from network); 23 Oct 2013 10:10:59 +0200 Received: from hostname.static.ISP.com (HELO ?192.168.1.60?) (YYY.YYY.ISP.IP) by static.158.XXX.XXX.XXX.clients.your-server.de. with ESMTPSA (DHE-RSA-AES256-SHA encrypted, authenticated); 23 Oct 2013 10:10:59 +0200 Message-ID: <[email protected]> Date: Wed, 23 Oct 2013 11:11:00 +0300 From: BigJaws Employee <[email protected]> User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.0.1 MIME-Version: 1.0 To: [email protected] Subject: test SPF Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit test SPF Any ideas why SPF is not working correctly? Also, are there any DNS settings that are not needed anymore and create a problem?

    Read the article

  • sendmail - DSN: Name Server host not found

    - by Daniel Mitchell
    I've recently setup a new backup server and have configured sendmail with a smart_relay_host Except every email from the command line doesn't go anywhere. From mail.log: Oct 3 14:32:52 **back01 sm-mta[16570]: p93DWqtC016568: to=<[email protected], ctladdr= (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=120762, relay=10.2.30.60, dsn=5.1.2, stat=Host unknown (Name server: 10.2.30.60: host not found) Oct 3 14:32:52 ***back01 sm-mta[16570]: p93DWqtC016568: p93DWqtC016570: DSN: Host unknown (Name server: 10.2.30.60: host not found) DNS is working correctly on this box. I can do forward and reverse lookups. I can also telnet to the mail relay and send a message that way. I'm stumped, any suggestions?

    Read the article

  • Tunneling over HTTP

    - by Morgan
    Hello, I have a network at work that is locked behind a firewall and Internet connection is available only by using a proxy server. At work, I can connect to databases that are distributed across the network. However, at home, I cannot connect to the proxy server or the databases. How can this be done? I can access my workstation via LogMeIn, so I can install anything on it. I thought of installing some kind of tunneling mechanism in my workstation. Then, at home, I could connect to this mechanism, which would in turn do the required connections. So essentially, what I'd like to do can be represented by the following diagram: Home = Workstation = Database. For example, whenever I connect to, say, 10.140.0.1:1234 at home, this would be redirected to 10.140.0.1:1234 of my Workstation, because 10.140.0.1:1234 is only available through the corporate network. NOTE: I'm using Windows XP.

    Read the article

  • RRAS Svr on win 2003 provides same gateway as the ip to vpn clients and subnet as 255.255.255.255

    - by Amit Phatarphekar
    Hello - I've setup a RRAS Svr on win 2003 svr, to provide VPN access to clients. I've followed all directions in microsoft documentation to finish the setup. A VPN client successfully connects when I connect to the VPN svr. But when I look at the ipconfig info, I see that the IP and Gateway are same and subnet is 255.255.255.255. Example IP - 10.0.0.121 Gateway - 10.0.0.121 subnet - 255.255.255.255 DNS - 10.0.0.12 What am I doing wrong?

    Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >