Search Results

Search found 11903 results on 477 pages for 'ip forwarding'.

Page 217/477 | < Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >

• How to redirect domain to new server?

  - by hfidgen

  I've got a domain registered with a hosting company who I no longer wish to use. I'm happy for them to keep managing my domain, but I want my domain to point to my new (better) server which i've just bought and set up. I know my new server's IP address and Nameservers, What do I need to do in my domain management control panel to make it point to my new server? Change the "A" record to the new IP? Change the nameservers to my new hosts nameservers? Is that it? Are there no other record on either server which need changing? I always get confused by who needs to do what when it comes to domains... Thanks, Hugh

  Read the article

• How do I route traffic to website using a spcified network connection on Windows 7

  - by rwetzeler

  I want to route all traffic to a website over my wireless connection while the rest of the traffic using my lan. What I tried was first finding out the IP address of the website I want to go to. For example, lets say pandora.com. I found it resolves to 208.85.40.20. I have entered that entry into my hosts file. I then added that route using route add 208.85.40.20 mask 255.255.255.255 WirelessIP. It doesn't seem to work however. Instead of using the IP address, is there a way that I can just say.. this URL to route over that connection? Does anyone know of a program that I can install that will do this.. possibly some sort of proxy or a software load balancer that can do this?

  Read the article

• Routing domain over lan [closed]

  - by Buri

  I have server on my local network which is exposed to the internet. I have domain pointed on my IP and setup forwarding. The thing i would like to do is when i access example.com from lan to connection be routed directly on my server, not to the nearest DNS. Things I had in mind were to upgrade router with dd-wrt and setup routing rule, or to setup local DNS. Unfortunately, I'm not familiar with neither of those systems.

  Read the article

• Setting up the metasploitable in virtualbox

  - by SetSlapShot

  I'm supposed to try and use kali to do exploits on metasploitable, but I'll burn that bridge when I get there. My question right now is: How do I set up a host only network on virtualbox? I heard that it was unsafe to run metasploitable in bridged networking mode, that host only or NAT is better. When I run metasploitable on NAT, the kali box (attacker) has the same ip address as the metasploitable box, and nmap doesn't really return anything except what I can only assume would be a scan of its own ports? I tried to create a host only network in virtual box. I left the adapter settings at the default, and unchecked DHCP server. now when I run ifconfig on the metasploitable box, there is no ip address listed. Am I setting up/connecting to/not configuring the host only network correctly?

  Read the article

• NAT and NGINX on the same server

  - by Morten

  I'm setting up a VPC cluster for my collaborative todo list application www.getdoneapp.com. To have my servers on the private network I need a NAT server so my servers on the private network can connect to the internet to receive updates and what not. The NAT server will consume an elastic IP address, so I'm wondering if I can just have that NAT server run nginx to direct traffic to my internal servers for HTTP. So the question is, is it a bad idea to run NGINX and NAT on the same server, or should I go for consuming 2 elastic IP addresses?

  Read the article

• forward ssh and ftp with a reverse proxy (squid)

  - by Arcath

  I already have a reverse proxy setup for HTTP, and im now looking to add ssh and ftp to it. i assume i can just copy the rules from the http list? how do i go about forwarding the requests? id like to have ftp on port 1235 and ssh on 1236

  Read the article

• nmap reports host up when it isn't

  - by martianway

  On an Ubuntu VM I ran: sudo nmap -sP 192.168.0.* This returned: Starting Nmap 5.00 ( http://nmap.org ) at 2010-12-28 22:46 PST Host 192.168.0.0 is up (0.00064s latency). Host 192.168.0.1 is up (0.00078s latency). Host 192.168.0.2 is up (0.00011s latency). . . . Host 192.168.0.254 is up (0.00068s latency). Host 192.168.0.255 is up (0.00066s latency). The problem is I only have 4 live machines on 192.168.0.* so why did nmap report every ip in the subnet has a live host? The ip address of the Ubuntu machine is 192.168.28.131 From this VM I can ping the live systems on my internal subnet 192.168.0.* and get the expected response. And if I ping a machine that doesn't exist I can get no response as expected.

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Secure copy uucp style

  - by Alexander Janssen

  I often have the case that I have to make a lot of hops to the remote host, just because there is no direct routing between my client and the remote host. When I need to copy files from a remote host two or more hops away, I always have to: client$ ssh host1 host1$ ssh host2 host2$ scp host3:/myfile . host2$ exit host1$ scp host2:myfile . host1$ exit client$ scp host1:myfile . Back when uucp still was being used this would be as simple as a uucp host1!host2!host3 /myfile . I know that there's uucp over ssh, but unfortunately I don't have the proper privileges on those machines to set it up. Also, I'm not sure if I really want to fiddle around with customer's machines. Does anyone know of a method doing this tasks without the need to setup a lot of tunnels or deploying new software to remote hosts? Maybe some kind of recursive script which clones itself to all the remote hosts, doing the hard work for me? Assume that authentication takes place with public keys and that all hosts do SSH Agent Forwarding. Edit: I'm not looking for a way to automatically forwarding my interactive sesssion to the nexthop host. I want a solution to copy files bangpath-style using scp via multiple hops without the need to install uucp on any of those machines. I don't have the (legal) rights or the privileges to make permanent changes to the ssh-config. Also, I'm sharing this username and hosts with a lot of other people. I'm willing to hack up my own script, but I wanted to know if anyone knows something which already does it. Minimum-invasive changes to hosts on the bangpath, simple invocation from the client. Edit 2: To give you an impression of how it's properly been done in interactive sessions, have a look at the GXPC clustershell. This is basically a Python-script, which spwans itself over to all remote hosts which have connectivity and where your ssh-key is installed. The great thing about it is, that you can tell "I can reach HostC via HostB via HostA." It just works. I want to have this for scp.

  Read the article

• Iptables REDIRECT + openvpn problem

  - by Emilio

  I want to redirect connection to port 22 to my openvpn binded port, on 60001. Openvpn is running on server on 60001 server:~$ sudo netstat -apn | grep openvpn udp 0 0 67.xx.xx.137:60001 0.0.0.0:* 4301/openvpn I redirect on server port 22 to 60001 server:~$ sudo iptables -F -t nat server:~$ sudo iptables -A PREROUTING -t nat -p udp --dport 22 -j REDIRECT --to-ports 60001 I start openvpn client (openvpn.conf is correct, it works with remote IP 22 replaced with remote IP 60001) client:~$ ./openvpn openvpn.conf Tue Apr 27 00:42:50 2010 OpenVPN 2.1.1 i686-pc-linux-gnu [SSL] [EPOLL] built on Mar 23 2010 Tue Apr 27 00:42:50 2010 UDPv4 link local (bound): [undef]:1194 Tue Apr 27 00:42:50 2010 UDPv4 link remote: 67.xx.xx.137:22 Tue Apr 27 00:42:52 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Tue Apr 27 00:42:55 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) ... It doesn't connect. iptables shows requests from client to server but no answers. What's wrong with it?

  Read the article

• exim4: multiple domains/IPs

  - by ButterdBread

  On my VPS I have 3 IPs which all have their own domain and their own reverse-DNS records. I have a website on each domain, sending emails. The problem is: the emails are rejected by many hosts because the reverse dns doesn't fit the host in the helo. All the emails are sent from the primary IP and therefore only one of the three domains work. I am looking for a way for exim to check which email adress i'm using to send the email and adapt the domain/IP transmitted in the helo. I have already tried many configurations but nothing has worked up to now. Simply changing MX-Records is impossible too, as I recieve (and also send) email via gmail and I don't want to set up my own webmail. Does anyone know a solution?

  Read the article

• Create and manage child name servers (glue records) within my domain?

  - by basilmir

  Preface I use a top level domain provider that only allows me to add "normal" third-party name servers (a list where i can add "ns1.hostingcompany.com" type entries... nothing else) AND "child name servers" which i can later attach to my parent account ( ns1.myowndomain.com and an ip address). They do not provide other means of linking up. I want to host my own server and dns, even with just one name server (at first). My setup: Airport Extreme - get's a static ip address from my ISP Mac Mini Server - sits behind the Airport and get's a 10.0.1.2 My problem is that i can't seem to configure DNS correctly. I added a "child nameserver" with my airport's external static ip address at the top level provider, so to my understanding i should have all DNS traffic redirected to my Airport. I've opened port 53 UDP to let the traffic in. Now, what i don't get is this. My Mini Server is sitting on a 10.0.1.2 address and i have setup dns correctly, with an A record to point and resolve my server AND a reverse lookup to that 10.0.1.2. So it's ok for "internal stuff". Here is the clicker... How, when a request comes from the exterior for a reverse lookup, does the server "know" ... well look i have everything in 10.0.1.2 but the guy outside needs something from my real address. I can't begin to describe the MX record bonanza... How do i set this "right"? Do i "need" my Mini Server to sit on the external address directly (i can see how this could be the preferred solution, being close to a "real" server i have in my mind). If not... do i need a PTR record on the 10.0.1.2 server but with the external address in there? My dream: I will extend this "setup" with multiple Mini's in different cities where i work. I want a distributed something (Xgrid comes to mind). PS. Be gentle, i've read 2 books and the subject, and bought both the Lynda Essentials and DNS and Networking to boot, still i'm far from being on top of things.

  Read the article

• FTP server questions

  - by Brad

  I'm currently trying to set up a home FTP server using debian and proftpd and I've run into a problem that has me confused. I have most things set up already, I believe, but I cannot access my ftp server using my external ip. I've forwarded the correct port on my router and I've checked http://www.yougetsignal.com/tools/open-ports/ to be sure that it is, in fact, opened. I've used telnet locally on my server to check that the port accepts connections. I am able to use ftp via LAN. But, I still cannot access anything externally. I'm thinking that there's still some router configuration to be done in order to fix this, such as routing all connections on my ftp port to my server via the internal ip, but I can't find any option on my router to do this. Is this a necessary step? There is an option to use DMZ hosting, but I'd rather avoid it if possible. I can provide additional information as requested, please let me know any information that you think could help at all. Thanks. -Brad PS - I have a Telus Actiontec Modem/Router Update - !! Trying my ftp server out at work, worked! I guess I did set it up correctly after all. What is confusing me, though, is why doesn't the server allow me to connect locally anymore? That seems very weird to me. Also, I don't really understand why I am denied outright if I attempt to connect from the same network using the external address. I'll look into it more when I get home, but thank you guys for your help. Update 2 - I found the problem with not being able to connect locally anymore. I was setting the masquerade address to my external IP and for some reason that was causing it to hang on MLSD when I connected using my LAN address. I've removed the masquerade address and I'm going to check if I need it at work tomorrow. I'll update this page if I find anything.

  Read the article

• linux intrusion detection software

  - by Sam Hammamy

  I have an Ubuntu VPS that I use for practice and deploying prototypes as I am a python developer. I recently started teaching my self sys admin tasks, like installing OpenLDAP. I happened to turn off the ufw firewall for just a minute, and when I ran an netstat command, I saw a foreign ip connected to ssh that I traced to china. I'd like to know a few things: 1) Is there any good network intrusion detection software, such that if any IP that's outside a specific range connects to the VPN, I can be notified? -- I am thinking about scripting this, but I'm pretty sure there's something useful out there and I believe in the wisdom of crowds. 2) How did this person gain access to my server? Is it because my firewall was down? Or is it because they browsed my LDAP directory and from there figured out a way to connect (there was a clear text password in the tree but it wasn't one used by the server's sshd)?

  Read the article

• Simplest vpn server for linux

  - by Ian R.

  I'm supposed to setup a vpn server on our linux machine for some of our employees who travel a lot. I have 10 ip's on that server so I'm looking into a simple software (not openvpn which is a hell to digest). The software should be able to allow connections from any os type (linux, mac, windows). It should also be able to allow connections via username/password. I would like to assign 1 ip to each client. Any ideas, names?

  Read the article

• How to determine what program send the packet recorded in Wireshark?

  - by Tono Nam

  I was taking some tutorials on Wireshark in order to analyze the packets sent and received when talking to a web server for purposes of learning. When I start listening/recording packets in Wireshark, there where so many packages being recorded (700 packages per minute). Is it normal to have that much traffic if I have all the programs that will cause traffic such as all browsers, log me in, dropbox, goto meeting, etc., closed? In order to try to solve the problem I am analyzing random packets. Take for instance this filter: I just selected a random IP: 74.125.130.99. So how can I know from what program those packets where created? Also how can I get more info about that communication bwtween my computer (192.168.0.139) and that server (74.125.130.99)? I just selected a random IP from the Wireshark capture. There are also other IPs that I have no idea why they are communicating with my computer. How can I figure that out?

  Read the article

• MMS gets hostname from uname and can't connect to it

  - by Adam Monsen

  I'm trying to get 10gen's MongoDB Monitoring Service monitoring my 3-node replica set. The replica set running in an AWS VPC. Each node runs on a different [virtual] machine. Assume their IPs are 192.168.1.1 (primary or secondary), 192.168.1.2 (primary or secondary), 192.168.1.3 (arbiter). From a quick look at the source, MMS appears to get the hostname of the machine it is running on like so: platform.uname()[1] For my VPC EC2 instance, this returns something like ip-192-168-1-1 MMS then tries to connect to this hostname, which does not resolve. I'd rather just use IP addresses (since they're always static), but it seems like the hardcoded use of platform.uname()[1] in mmsAgent.py precludes that. So, what's an elegant way out of this? Hack /etc/hosts? I'm not setting up a DNS server just for this. Maybe I'm just misunderstanding how to configure MMS.

  Read the article

• Windows 2003 - RAS service - VPN client can only connect to server, not internal network

  - by Gk

  Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

  Read the article

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• Windows VPN - NO internet access

  - by sharru

  I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

  Read the article

• iptables - drop all HTTP(S) traffic but from CloudFlare

  - by Martin

  I would like to allow only HTTP(S) traffic coming from CloudFlare. In that way attackers cannot attack the server directly. I know CloudFlare is not mainly a DDoS mitigator, but I would like to try it either way. I'm currently only having access to iptables (ipv4 only), but will try to install ip6tables soon. I just need to have this fixed soon. (we're getting (D)DoSed atm.) I was thinking about something like this: iptables -I INPUT -s <CloudFlare IP> --dport 80 -j ACCEPT iptables -I INPUT -s <CloudFlare IP> --dport 443 -j ACCEPT iptables -I INPUT -p tcp --dport 80 -j DROP iptables -I INPUT -p tcp --dport 443 -j DROP I know that CloudFlare has multiple IPs, but just for an example. Would this be the right way?

  Read the article

• how to setup a public dns server?

  - by Zhenyu Li

  I just installed powerdns, and I added the record example.com A 120 1.2.3.4 and I used dig to see if it works, and it works. dig @localhost example.com and it will show the correct ip address : 1.2.3.4 My question is how to use this dns server in the public, so that my domain example.com to be dig without the @localhost? I will need the ns1.example.com ns2.example.com to be pointed to my 2 powerdns server ip, and I need to use my dns server to set the ns1.example.com, ns2.example.com, so that my other products could also setup ns1.example.com as their dns server, so how to do this?Edit

  Read the article

• Connecting to my SMTP server

  - by Joseph Silvashy

  I have a few questions, I just installed SMTP on my Ubuntu server, and I want to know how to connect to it from a different machine... I'm not really clear. I tried: telnet my.servers.ip.address 25 I think it's running on port 25, but I don't know where to find out, its not in the conf file anywhere. Additionally do I need it to be a FDQN? or can I just access my mail server via it's IP address? I know that the service works on the machine because I'm able to echo test | mail -s "test" [email protected] Any help debugging or understanding this would be helpful, thanks guys!

  Read the article

• How can I port forward over a VPN NAT?

  - by Charlie

  I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

< Previous Page | 213 214 215 216 217 218 219 220 221 222 223 224  | Next Page >