Search Results

Search found 5760 results on 231 pages for 'itunes alternative'.

Page 218/231 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

• JUnit for Functions with Void Return Values

  - by RobotNerd

  I've been working on a Java application where I have to use JUnit for testing. I am learning it as I go. So far I find it to be useful, especially when used in conjunction with the Eclipse JUnit plugin. After playing around a bit, I developed a consistent method for building my unit tests for functions with no return values. I wanted to share it here and ask others to comment. Do you have any suggested improvements or alternative ways to accomplish the same goal? Common Return Values First, there's an enumeration which is used to store values representing test outcomes. public enum UnitTestReturnValues { noException, unexpectedException // etc... } Generalized Test Let's say a unit test is being written for: public class SomeClass { public void targetFunction (int x, int y) { // ... } } The JUnit test class would be created: import junit.framework.TestCase; public class TestSomeClass extends TestCase { // ... } Within this class, I create a function which is used for every call to the target function being tested. It catches all exceptions and returns a message based on the outcome. For example: public class TestSomeClass extends TestCase { private UnitTestReturnValues callTargetFunction (int x, int y) { UnitTestReturnValues outcome = UnitTestReturnValues.noException; SomeClass testObj = new SomeClass (); try { testObj.targetFunction (x, y); } catch (Exception e) { UnitTestReturnValues.unexpectedException; } return outcome; } } JUnit Tests Functions called by JUnit begin with a lowercase "test" in the function name, and they fail at the first failed assertion. To run multiple tests on the targetFunction above, it would be written as: public class TestSomeClass extends TestCase { public void testTargetFunctionNegatives () { assertEquals ( callTargetFunction (-1, -1), UnitTestReturnValues.noException); } public void testTargetFunctionZeros () { assertEquals ( callTargetFunction (0, 0), UnitTestReturnValues.noException); } // and so on... } Please let me know if you have any suggestions or improvements. Keep in mind that I am in the process of learning how to use JUnit, so I'm sure there are existing tools available that might make this process easier. Thanks!

  Read the article

• jquery in ajax loaded content

  - by Kim Gysen

  My application is supposed to be a single page application and I have the following code that works fine: home.php: <div id="container"> </div> accordion.php: //Click functions: load content $('#parents').click(function(){ //Load parent in container $('#container').load('http://www.blabla.com/entities/parents/parents.php'); }); parents.php: <div class="entity_wrapper"> Some divs and selectors </div> <script type="text/javascript"> $(document).ready(function(){ //Some jQuery / javascript }); </script> So the content loads fine, while the scripts dynamically loaded execute fine as well. I apply this system repetitively and it continues to work smoothly. I've seen that there are a lot of frameworks available on SPA's (such as backbone.js) but I don't understand why I need them if this works fine. From the backbone.js website: When working on a web application that involves a lot of JavaScript, one of the first things you learn is to stop tying your data to the DOM. It's all too easy to create JavaScript applications that end up as tangled piles of jQuery selectors and callbacks, all trying frantically to keep data in sync between the HTML UI, your JavaScript logic, and the database on your server. For rich client-side applications, a more structured approach is often helpful. Well, I totally don't have the feeling that I'm going through the stuff they mention. Adding the javascript per page works really well for me. They are html containers with clear scope and the javascript is just related to that part. More over, the front end doesn't do that much, most of the logic is managed based on Ajax calls to external PHP scripts. Sometimes the js can be a bit more extended for some functionalities, but all just loads as smooth in less than a second. If you think that this is bad coding, please tell me why I cannot do this and more importantly, what is the alternative I should apply. At the moment, I really don't see a reason on why I would change this approach as it just works too well. I'm kinda stuck on this question because it just worries me sick as it seems to easy to be true. Why would people go through hard times if it would be as easy as this...

  Read the article

• Webservice for uploading data: security considerations

  - by Philip Daubmeier

  Hi everyone! Im not sure about what authentification method I should use for my webservice. I've searched on SO, and found nothing that helped me. Preliminary Im building an application that uploads data from a local database to a server (running my webservice), where all records are merged and stored in a central database. I am currently binary serializing a DataTable, that holds a small fragment of the local database, where all uninteresting stuff is already filtered out. The byte[] (serialized DataTable), together with the userid and a hash of the users password is then uploaded to the webservice via SOAP. The application together with the webservice already work exactly like intended. The Problem The issue I am thinking about is now: What is if someone just sniffs the network traffic, 'steals' the users id and password hash to send his own SOAP message with modified data that corrupts my database? Options The approaches to solving that problem, I already thought of, are: Using ssl + certificates for establishing the connection: I dont really want to use ssl, I would prefer a simpler solution. After all, every information that is transfered to the webservice can be seen on the website later on. What I want to say is: there is no secret/financial/business-critical information, that has to be hidden. I think ssl would be sort of an overkill for that task. Encrypting the byte[]: I think that would be a performance killer, considering that the goal of the excercise was simply to authenticate the user. Hashing the users password together with the data: I kind of like the idea: Creating a checksum from the data, concatenating that checksum with the password-hash and hashing this whole thing again. That would assure the data was sent from this specific user, and the data wasnt modified. The actual question So, what do you think is the best approach in terms of meeting the following requirements? Rather simple solution (As it doesnt have to be super secure; no secret/business-critical information transfered) Easily implementable retrospectively (Dont want to write it all again :) ) Doesnt impact to much on performance What do you think of my prefered solution, the last one in the list above? Is there any alternative solution I didnt mention, that would fit better? You dont have to answer every question in detail. Just push me in the right direction. I very much appreciate every well-grounded opinion. Thanks in advance!

  Read the article

• How can I improve my select query for storing large versioned data sets?

  - by Jason Francis

  At work, we build large multi-page web applications, consisting mostly of radio and check boxes. The primary purpose of each application is to gather data, but as users return to a page they have previously visited, we report back to them their previous responses. Worst-case scenario, we might have up to 900 distinct variables and around 1.5 million users. For several reasons, it makes sense to use an insert-only approach to storing the data (as opposed to update-in-place) so that we can capture historical data about repeated interactions with variables. The net result is that we might have several responses per user per variable. Our table to collect the responses looks something like this: CREATE TABLE [dbo].[results]( [id] [bigint] IDENTITY(1,1) NOT NULL, [userid] [int] NULL, [variable] [varchar](8) NULL, [value] [tinyint] NULL, [submitted] [smalldatetime] NULL) Where id serves as the primary key. Virtually every request results in a series of insert statements (one per variable submitted), and then we run a select to produce previous responses for the next page (something like this): SELECT t.id, t.variable, t.value FROM results t WITH (NOLOCK) WHERE t.userid = '2111846' AND (t.variable='internat' OR t.variable='veteran' OR t.variable='athlete') AND t.id IN (SELECT MAX(id) AS id FROM results WITH (NOLOCK) WHERE userid = '2111846' AND (t.variable='internat' OR t.variable='veteran' OR t.variable='athlete') GROUP BY variable) Which, in this case, would return the most recent responses for the variables "internat", "veteran", and "athlete" for user 2111846. We have followed the advice of the database tuning tools in indexing the tables, and against our data, this is the best-performing version of the select query that we have been able to come up with. Even so, there seems to be significant performance degradation as the table approaches 1 million records (and we might have about 150x that). We have a fairly-elegant solution in place for sharding the data across multiple tables which has been working quite well, but I am open for any advice about how I might construct a better version of the select query. We use this structure frequently for storing lots of independent data points, and we like the benefits it provides. So the question is, how can I improve the performance of the select query? I assume the nested select statement is a bad idea, but I have yet to find an alternative that performs as well. Thanks in advance. NB: Since we emphasize creating over reading in this case, and since we never update in place, there doesn't seem to be any penalty (and some advantage) for using the NOLOCK directive in this case.

  Read the article

• How can I prevent page-break in CFDocument from occuring in middle of content?

  - by Dan Roberts

  I am generating a PDF file dynamically from html/css using the cfdocument tag. There are blocks of content that I don't want to span multiple pages. After some searching I found that the style "page-break-inside" is supported according to the docs. However in my testing the declaration "page-break-inside: avoid" does no good. Any suggestions on getting this style declaration to work, or have alternative suggestions? Here is an example. I would expect the content in the div tag not to span a page break but it does. The style "page-break-inside: avoid" is not being honored. <cfdocument format="flashpaper"> <cfloop from="1" to="10" index="i"> <div style="page-break-inside: avoid"> <h1>Table Label</h1> <table> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> <tr><td>label</td><td>data</td></tr> </table> </div> </cfloop> </cfdocument>

  Read the article

• Preg_replace regex, newlines, connection resets

  - by bob_the_destroyer

  I have mixed html, custom code, and regular text I need to examine and change frequently on several, long wiki pages. I'm working with a proprietary wiki-like application and have no control over how the application functions or validates user input. The layout of pages that users add must follow a very specific standard layout and always include very specific text in only certain places - a standard which frequently changes. If users add pages that are so far out of the standard, they will be deleted. The fact that all this is obviously a complete waste of time when alternative platforms to do exactly what's needed here exist is already understood. I've built a PHP based API to automate this post-validation and frequent restandardization process for me. I've been able set up regex patterns to handle all this mixed text, and they all work fine for handling single lines. The problem I have is this: Poorly formed regex against long text with line breaks can lead to unexpected results, such as connection resets. I have no access to server-side logs to troubleshoot. How do I overcome this? This is just one example of what I currently have: {column} and {section} tags I'm searching for below can have any number of attributes, and wrap any text. {section} may or may not exist and may or may not be one or more lines under {column}, but it has to be wrapped inside {column}. {column} itself may or may not exist, and if it doesn't, I don't care. I want to grab the inner section contents and wrap it in an html div tag. I can't recall the exact pattern I'm using offhand at the moment, but it's close enough... $pattern = "/\{column:id=summary([|]?([a-zA-Z0-9-_ ]+[:][a-zA-Z0-9-_ ]+[ ]?))\}(.*)({section([|]([a-zA-Z0-9-_ ]+[:][a-zA-Z0-9-_ ]+[ ]?))\}(.*)\{section\}(.*))?{column\}/s"; $replacement = "{html}<div id='summary'$7</div{html}"; $text = preg_replace($pattern, $replacement, $subject); Handling the {column} and {section} attributes and passing only valid HTML parameters to the new html div or a subtext of it is itself a challenge, but my main focus above right now is getting that (.*) value within {section} above without causing a connection reset. Any pointers?

  Read the article

• How to pipe two CORE::system commands in a cross-platform way

  - by Pedro Silva

  I'm writing a System::Wrapper module to abstract away from CORE::system and the qx operator. I have a serial method that attempts to connect command1's output to command2's input. I've made some progress using named pipes, but POSIX::mkfifo is not cross-platform. Here's part of what I have so far (the run method at the bottom basically calls system): package main; my $obj1 = System::Wrapper->new( interpreter => 'perl', arguments => [-pe => q{''}], input => ['input.txt'], description => 'Concatenate input.txt to STDOUT', ); my $obj2 = System::Wrapper->new( interpreter => 'perl', arguments => [-pe => q{'$_ = reverse $_}'}], description => 'Reverse lines of input input', output => { '>' => 'output' }, ); $obj1->serial( $obj2 ); package System::Wrapper; #... sub serial { my ($self, @commands) = @_; eval { require POSIX; POSIX->import(); require threads; }; my $tmp_dir = File::Spec->tmpdir(); my $last = $self; my @threads; push @commands, $self; for my $command (@commands) { croak sprintf "%s::serial: type of args to serial must be '%s', not '%s'", ref $self, ref $self, ref $command || $command unless ref $command eq ref $self; my $named_pipe = File::Spec->catfile( $tmp_dir, int \$command ); POSIX::mkfifo( $named_pipe, 0777 ) or croak sprintf "%s::serial: couldn't create named pipe %s: %s", ref $self, $named_pipe, $!; $last->output( { '>' => $named_pipe } ); $command->input( $named_pipe ); push @threads, threads->new( sub{ $last->run } ); $last = $command; } $_->join for @threads; } #... My specific questions: Is there an alternative to POSIX::mkfifo that is cross-platform? Win32 named pipes don't work, as you can't open those as regular files, neither do sockets, for the same reasons. The above doesn't quite work; the two threads get spawned correctly, but nothing flows across the pipe. I suppose that might have something to do with pipe deadlocking or output buffering. What throws me off is that when I run those two commands in the actual shell, everything works as expected.

  Read the article

• Securing paths in PHP

  - by tjm

  I'm writing some PHP which takes some paths to different content directories, and uses these to include various parts of pages later. I'm trying to ensure that the paths are as they seem, and none of them break the rules of the application. I have PRIVATEDIR which must lie above DOCUMENT_ROOT (aka) PUBLICDIR. CONTENTDIR which must lie within PRIVATEDIR and not go back below PUBLICDIR and some other *DIR's which must remain within CONTENTDIR. Currently I set up some defaults, and then override the ones the user specifies and then sanity check them with the following. private function __construct($options) { error_reporting(0); if(is_array($options)) { $this->opts = array_merge($this->opts, $options); } if($this->opts['STATUS']==='debug') { error_reporting(E_ALL | E_NOTICE | E_STRICT); } $this->opts['PUBLICDIR'] = realpath($_SERVER['DOCUMENT_ROOT']) .DIRECTORY_SEPARATOR; $this->opts['PRIVATEDIR'] = realpath($this->opts['PUBLICDIR'] .$this->opts['PRIVATEDIR']) .DIRECTORY_SEPARATOR; $this->opts['CONTENTDIR'] = realpath($this->opts['PRIVATEDIR'] .$this->opts['CONTENTDIR']) .DIRECTORY_SEPARATOR; $this->opts['CACHEDIR'] = realpath($this->opts['PRIVATEDIR'] .$this->opts['CACHEDIR']) .DIRECTORY_SEPARATOR; $this->opts['ERRORDIR'] = realpath($this->opts['CONTENTDIR'] .$this->opts['ERRORDIR']) .DIRECTORY_SEPARATOR; $this->opts['TEMPLATEDIR' = realpath($this->opts['CONTENTDIR'] .$this->opts['TEMPLATEDIR']) .DIRECTORY_SEPARATOR; // then here I have to check that PRIVATEDIR is above PUBLICDIR // and that all the rest remain within private dir and don't drop // down into (or below) PUBLICDIR again. And die with an error if // they don't conform. } The thing is this seems like a lot of work to do, especially as it must be run, every time a page is accessed, before I can do anything else, e.g check for a cached version of the page I'm serving. Part of me is thinking, since all of these paths are predefined by the maintainer of the site, they SHOULD be aware of what paths they are allowing access to and ensuring they are secure. But, I think I'm thinking that because currently I am said maintainer, and I KNOW my paths conform to the rules. That said, I do want to secure this thing from any accidental errors by future maintainers (and I bet, now I've said above "I KNOW...", probably from myself somewhere down the line). This just feels like a suboptimal solution. I wonder how fast this would really be and what you would suggest to improve it or as an alternative? Thanks.

  Read the article

• How dangerous is e.preventDefault();, and can it be replaced by keydown/mousedown tracking?

  - by yc

  I'm working on a tracking script for a fairly sophisticated CRM for tracking form actions in Google Analytics. I'm trying to balance the desire to track form actions accurately with the need to never prevent a form from not working. Now, I know that doing something like this doesn't work. $('form').submit(function(){ _gaq.push('_trackEvent', 'Form', 'Submit', $(this).attr('action')) }); The DOM unloads before this has a chance to process. So, a lot of sample code recommends something like this: $('form').submit(function(e){ e.preventDefault(); var form = this; _gaq.push('_trackEvent', 'Form', 'Submit', $(this).attr('action')); //...do some other tracking stuff... setTimeout(function(){ form.submit(); }, 400); }); This is reliable in most cases, but it makes me nervous. What if something happens between e.preventDefault();and when I get around to triggering the DOM based submit? I've totally broken the form. I've been poking around some other analytics implementations, and I've noticed something like this: $('form').mousedown(function(){ _gaq.push('_trackEvent', 'Form', 'Submit', $(this).attr('action')); }); $('form').keydown(function(e){ if(e.which===13) //if the keydown is the enter key _gaq.push('_trackEvent', 'Form', 'Submit', $(this).attr('action')); }); Basically, instead of interrupting the form submit, preempting it by assuming that if someone is mousing down or keying down on Enter, than that form is submitted. Obviously, this will result in a certain amount of false positives, but it completely eliminates use of e.preventDefault();, which in my mind eliminates the risk that I might ever prevent a form from successfully submitting. So, my question: Is it possible to take the standard form tracking snippet and prevent it from ever fully preventing the form from submitting? Is the mousedown/keydown alternative viable? Are there any submission cases it may miss? Specifically, are there other ways to end up submitting besides the mouse and the keyboard enter? And will the browser always have time to process javascript before beginning to unload the page?

  Read the article

• Are python list comprehensions always a good programming practice?

  - by dln385

  To make the question clear, I'll use a specific example. I have a list of college courses, and each course has a few fields (all of which are strings). The user gives me a string of search terms, and I return a list of courses that match all of the search terms. This can be done in a single list comprehension or a few nested for loops. Here's the implementation. First, the Course class: class Course: def __init__(self, date, title, instructor, ID, description, instructorDescription, *args): self.date = date self.title = title self.instructor = instructor self.ID = ID self.description = description self.instructorDescription = instructorDescription self.misc = args Every field is a string, except misc, which is a list of strings. Here's the search as a single list comprehension. courses is the list of courses, and query is the string of search terms, for example "history project". def searchCourses(courses, query): terms = query.lower().strip().split() return tuple(course for course in courses if all( term in course.date.lower() or term in course.title.lower() or term in course.instructor.lower() or term in course.ID.lower() or term in course.description.lower() or term in course.instructorDescription.lower() or any(term in item.lower() for item in course.misc) for term in terms)) You'll notice that a complex list comprehension is difficult to read. I implemented the same logic as nested for loops, and created this alternative: def searchCourses2(courses, query): terms = query.lower().strip().split() results = [] for course in courses: for term in terms: if (term in course.date.lower() or term in course.title.lower() or term in course.instructor.lower() or term in course.ID.lower() or term in course.description.lower() or term in course.instructorDescription.lower()): break for item in course.misc: if term in item.lower(): break else: continue break else: continue results.append(course) return tuple(results) That logic can be hard to follow too. I have verified that both methods return the correct results. Both methods are nearly equivalent in speed, except in some cases. I ran some tests with timeit, and found that the former is three times faster when the user searches for multiple uncommon terms, while the latter is three times faster when the user searches for multiple common terms. Still, this is not a big enough difference to make me worry. So my question is this: which is better? Are list comprehensions always the way to go, or should complicated statements be handled with nested for loops? Or is there a better solution altogether?

  Read the article

• Image upload not functioning correctly

  - by PurpleSmurf

  I'm still trying to get to grips with PHP, and I'm trying to make a form that uploads a picture to a database. I don't have permissions for move_uploaded_file so I'm using the copy() as an alternative. Everywhere I've seen experiencing similar problems have all been with move_uploaded_file so I'm rather stuck. Trying to copy the image from the desktop doesn't seem to be working, it's not throwing up any more PHP errors but is displaying the error message for if something goes wrong. The form sends data to two tables in the database but I'm mainly concerned with the upload not working. There's over 200 lines so I'll post a snippet of the upload code, thank you in advance: function getExtension($str) { $i = strrpos($str,"."); if (!$i) { return ""; } $l = strlen($str) - $i; $ext = substr($str,$i+1,$l); return $ext; } //This variable is used as a flag. The value is initialized with 0 (meaning no error found) and it will be changed to 1 if an errro occures. If the error occures the file will not be uploaded. $errors=0; //checks if the form has been submitted if(isset($_POST['submitted'])) { //reads the name of the file the user submitted for uploading $image=$_FILES['image']['name']; //if it is not empty if ($image) { //get the original name of the file from the clients machine $filename = stripslashes($_FILES['image']['name']); //get the extension of the file in a lower case format $extension = getExtension($filename); $extension = strtolower($extension); //if it is unknown extension, class as an error and do not upload the file, otherwise continue if (($extension != "jpg") && ($extension != "jpeg") && ($extension != "png") && ($extension != "gif")) { //print error message echo '<h1>Unknown extension!</h1>'; $errors=1; } else { //get the size of the image in bytes //$_FILES['image']['tmp_name'] is the temporary filename of the file in which the uploaded file was stored on the server $size=filesize($_FILES['image']['tmp_name']); //give an unique name, for example the time in unix time format $image_name=time().'.'.$extension; //the new name will be containing the full path where will be stored (images folder) $newname="/home/k0929907/www/uploads/".$image_name; //verify if the image has been uploaded, and print error instead $copied = copy($_FILES['image']['tmp_name'], $newname); if (!$copied) { echo '<h1>Copy unsuccessfull!</h1>'; $errors=1; } } } }

  Read the article

• How To Start Your Own Professional Blog with WordPress

  - by Matthew Guay

  Would you like to start your own blog or website?  With a free WordPress  account, it’s free and easy to get started creating your own professional quality blog site. This is the first part in a series on how to create your own professional quality blog site. No, we’re not talking about some cheapo looking blog from Blogger or something on Facebook, but creating a quality blog you can be proud of and present to millions of readers online. WordPress is one of the most popular blogging platforms, powering hundreds of high-profile websites and blogs around the world.  It’s both powerful and easy to use, which makes it great whether you’re just starting out or are a blogging pro.  To start out with your blogging project WordPress is completely free, and you can use the online interface or install the WordPress software on your own server and blog from there. Getting Started You can start a blog in just a few minutes.  Head over to WordPress.com and click Sign up now on the right-hand side of the main page. Enter a username and password, check that you agree with the legal terms, select the “Gimme a blog” bullet, and click Next. WordPress may inform you that your username is already taken, simply choose a new one and try again. Next, choose a domain for your blog.  This will be the address for your site, and cannot be changed, so be sure to choose exactly what you want.  If you’d prefer your address to be yourname.com instead of yourname.wordpress.com, you can add your own domain for a fee after your blog is setup…but we’ll cover that later. Once you click signup, you will be sent a confirmation email.  While you wait for the email to arrive you can go ahead and enter in your name and a short bio about yourself. When you receive your confirmation email, click the link.  Congratulations; you now have your own blog! You can view your new blog immediately, though the default theme isn’t very interesting without your content and pictures. Back on the page you opened from the email, click Login to access your blog’s administration page and to start adding stuff to your blog.  You can also access your blog’s admin page anytime by from yourname.wordpress.com/admin, substituting your own blog name for yourname. Enter your username and password, then click Log in to get started. Adding Content to your WordPress.com Blog When you sign in to your WordPress blog, you’ll first see the WordPress Admin page.  Here you can see recent posts and comments, and you can see stats of how many people have visited your site.  You can also access all of your blog tools and settings right from this page. To add a new post to your blog, click the Posts link on the left, then click “Add New” either on the left menu or on the top of the Edit Posts page.  Or, if you want to edit the default first post, hover over it and select Edit. Or click the New Posts button on the top of the page.  This menu bar is always visible whenever you’re logged in, so it’s an easy way to add a post. The editor lets you easily write anything you want in a Microsoft Word-style editor.  You can format your text, add lists, links, quotes, and more.  When you’re ready to share your content with the world, click Publish on the right side. To add pictures or other files, click the picture icon beside “Upload/Insert”.  Your free blog account can store up to 3Gb of pictures and documents which will definitely give you a good start. Click Select Files, and then choose the pictures or documents you want to add to your post. When the pictures have uploaded, you can add a caption and choose how to position the picture.  When you’re finished, select “Insert into Post”.   Or, if you want to add a video, click the video button.  You have to add a paid upgrade to upload videos directly, but you can add YouTube and other online videos for free. Click the “From URL” tab, and then paste the link to the YouTube video and click Insert into post. If you’re a code geek, click the HTML tab in the editor and edit the HTML of your blog post the geeky way. Once you’ve added all your content and edited it the way you want, click the Publish button on the right of the editor.  Or, you can click Preview to make sure it looks right, and then click Publish. Here’s our blog with the new blog post containing a picture and video.  While you’re getting to know you’re way around the controls in WordPress, the Preview feature will be your best friend while you try to organize the content to your liking.   Conclusion It only takes a couple minutes to get started blogging at WordPress.com. Whether you want to write about your daily life, share pictures of your children, or review the latest books and gadgets, WordPress.com is a great place to get started for free.  But we’ve only covered a small portion of the WordPress features…but this should get you started. Check back for more WordPress and blogging coverage coming up soon! Links Signup for a free WordPress.com account Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareProtecting Your WordPress Admin Panel From Hackers With .htaccessMake a Backup Copy of your Production Wordpress Blog on UbuntuLinux QuickTip: Downloading and Un-tarring in One Step TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

  Read the article

• The dynamic Type in C# Simplifies COM Member Access from Visual FoxPro

  - by Rick Strahl

  I’ve written quite a bit about Visual FoxPro interoperating with .NET in the past both for ASP.NET interacting with Visual FoxPro COM objects as well as Visual FoxPro calling into .NET code via COM Interop. COM Interop with Visual FoxPro has a number of problems but one of them at least got a lot easier with the introduction of dynamic type support in .NET. One of the biggest problems with COM interop has been that it’s been really difficult to pass dynamic objects from FoxPro to .NET and get them properly typed. The only way that any strong typing can occur in .NET for FoxPro components is via COM type library exports of Visual FoxPro components. Due to limitations in Visual FoxPro’s type library support as well as the dynamic nature of the Visual FoxPro language where few things are or can be described in the form of a COM type library, a lot of useful interaction between FoxPro and .NET required the use of messy Reflection code in .NET. Reflection is .NET’s base interface to runtime type discovery and dynamic execution of code without requiring strong typing. In FoxPro terms it’s similar to EVALUATE() functionality albeit with a much more complex API and corresponiding syntax. The Reflection APIs are fairly powerful, but they are rather awkward to use and require a lot of code. Even with the creation of wrapper utility classes for common EVAL() style Reflection functionality dynamically access COM objects passed to .NET often is pretty tedious and ugly. Let’s look at a simple example. In the following code I use some FoxPro code to dynamically create an object in code and then pass this object to .NET. An alternative to this might also be to create a new object on the fly by using SCATTER NAME on a database record. How the object is created is inconsequential, other than the fact that it’s not defined as a COM object – it’s a pure FoxPro object that is passed to .NET. Here’s the code: *** Create .NET COM InstanceloNet = CREATEOBJECT('DotNetCom.DotNetComPublisher') *** Create a Customer Object Instance (factory method) loCustomer = GetCustomer() loCustomer.Name = "Rick Strahl" loCustomer.Company = "West Wind Technologies" loCustomer.creditLimit = 9999999999.99 loCustomer.Address.StreetAddress = "32 Kaiea Place" loCustomer.Address.Phone = "808 579-8342" loCustomer.Address.Email = "[email protected]" *** Pass Fox Object and echo back values ? loNet.PassRecordObject(loObject) RETURN FUNCTION GetCustomer LOCAL loCustomer, loAddress loCustomer = CREATEOBJECT("EMPTY") ADDPROPERTY(loCustomer,"Name","") ADDPROPERTY(loCustomer,"Company","") ADDPROPERTY(loCUstomer,"CreditLimit",0.00) ADDPROPERTY(loCustomer,"Entered",DATETIME()) loAddress = CREATEOBJECT("Empty") ADDPROPERTY(loAddress,"StreetAddress","") ADDPROPERTY(loAddress,"Phone","") ADDPROPERTY(loAddress,"Email","") ADDPROPERTY(loCustomer,"Address",loAddress) RETURN loCustomer ENDFUNC Now prior to .NET 4.0 you’d have to access this object passed to .NET via Reflection and the method code to do this would looks something like this in the .NET component: public string PassRecordObject(object FoxObject) { // *** using raw Reflection string Company = (string) FoxObject.GetType().InvokeMember( "Company", BindingFlags.GetProperty,null, FoxObject,null); // using the easier ComUtils wrappers string Name = (string) ComUtils.GetProperty(FoxObject,"Name"); // Getting Address object – then getting child properties object Address = ComUtils.GetProperty(FoxObject,"Address");    string Street = (string) ComUtils.GetProperty(FoxObject,"StreetAddress"); // using ComUtils 'Ex' functions you can use . Syntax     string StreetAddress = (string) ComUtils.GetPropertyEx(FoxObject,"AddressStreetAddress"); return Name + Environment.NewLine + Company + Environment.NewLine + StreetAddress + Environment.NewLine + " FOX"; } Note that the FoxObject is passed in as type object which has no specific type. Since the object doesn’t exist in .NET as a type signature the object is passed without any specific type information as plain non-descript object. To retrieve a property the Reflection APIs like Type.InvokeMember or Type.GetProperty().GetValue() etc. need to be used. I made this code a little simpler by using the Reflection Wrappers I mentioned earlier but even with those ComUtils calls the code is pretty ugly requiring passing the objects for each call and casting each element. Using .NET 4.0 Dynamic Typing makes this Code a lot cleaner Enter .NET 4.0 and the dynamic type. Replacing the input parameter to the .NET method from type object to dynamic makes the code to access the FoxPro component inside of .NET much more natural: public string PassRecordObjectDynamic(dynamic FoxObject) { // *** using raw Reflection string Company = FoxObject.Company; // *** using the easier ComUtils class string Name = FoxObject.Name; // *** using ComUtils 'ex' functions to use . Syntax string Address = FoxObject.Address.StreetAddress; return Name + Environment.NewLine + Company + Environment.NewLine + Address + Environment.NewLine + " FOX"; } As you can see the parameter is of type dynamic which as the name implies performs Reflection lookups and evaluation on the fly so all the Reflection code in the last example goes away. The code can use regular object ‘.’ syntax to reference each of the members of the object. You can access properties and call methods this way using natural object language. Also note that all the type casts that were required in the Reflection code go away – dynamic types like var can infer the type to cast to based on the target assignment. As long as the type can be inferred by the compiler at compile time (ie. the left side of the expression is strongly typed) no explicit casts are required. Note that although you get to use plain object syntax in the code above you don’t get Intellisense in Visual Studio because the type is dynamic and thus has no hard type definition in .NET . The above example calls a .NET Component from VFP, but it also works the other way around. Another frequent scenario is an .NET code calling into a FoxPro COM object that returns a dynamic result. Assume you have a FoxPro COM object returns a FoxPro Cursor Record as an object: DEFINE CLASS FoxData AS SESSION OlePublic cAppStartPath = "" FUNCTION INIT THIS.cAppStartPath = ADDBS( JustPath(Application.ServerName) ) SET PATH TO ( THIS.cAppStartpath ) ENDFUNC FUNCTION GetRecord(lnPk) LOCAL loCustomer SELECT * FROM tt_Cust WHERE pk = lnPk ; INTO CURSOR TCustomer IF _TALLY < 1 RETURN NULL ENDIF SCATTER NAME loCustomer MEMO RETURN loCustomer ENDFUNC ENDDEFINE If you call this from a .NET application you can now retrieve this data via COM Interop and cast the result as dynamic to simplify the data access of the dynamic FoxPro type that was created on the fly: int pk = 0; int.TryParse(Request.QueryString["id"],out pk); // Create Fox COM Object with Com Callable Wrapper FoxData foxData = new FoxData(); dynamic foxRecord = foxData.GetRecord(pk); string company = foxRecord.Company; DateTime entered = foxRecord.Entered; This code looks simple and natural as it should be – heck you could write code like this in days long gone by in scripting languages like ASP classic for example. Compared to the Reflection code that previously was necessary to run similar code this is much easier to write, understand and maintain. For COM interop and Visual FoxPro operation dynamic type support in .NET 4.0 is a huge improvement and certainly makes it much easier to deal with FoxPro code that calls into .NET. Regardless of whether you’re using COM for calling Visual FoxPro objects from .NET (ASP.NET calling a COM component and getting a dynamic result returned) or whether FoxPro code is calling into a .NET COM component from a FoxPro desktop application. At one point or another FoxPro likely ends up passing complex dynamic data to .NET and for this the dynamic typing makes coding much cleaner and more readable without having to create custom Reflection wrappers. As a bonus the dynamic runtime that underlies the dynamic type is fairly efficient in terms of making Reflection calls especially if members are repeatedly accessed. © Rick Strahl, West Wind Technologies, 2005-2010Posted in COM  FoxPro  .NET  CSharp  

  Read the article

• The Complete List of iPad Tips, Tricks, and Tutorials

  - by Ross

  The Apple iPad is the latest new toy, and we’ve put together a comprehensive list of every tip, trick, and tutorial that we could find to help you get the most out of it—and we’re even giving one away to one lucky reader. So read on! Note: We’ll be keeping this page updated as we find more great articles, so you should bookmark this page for future reference. Want Your Own iPad? How-To Geek is Giving One Away! All you have to do to enter is become a fan of our Facebook page, and we’ll pick a random fan to win the prize. Win an iPad on the How-To Geek Facebook Fan Page Disable the “clicking sound” on the iPad Keyboard Does the clicking sound when you tap the iPad keyboard bother you? Thankfully it’s easy to disable with a couple of taps. How to disable the “clicking sound” on your iPad’s keyboard Enable and add bookmarks to the Safari Bookmarks Bar on your iPad By default, Safari doesn’t display the Bookmarks Bar. This tip shows you how to change that. How to enable and add bookmarks to the Safari Bookmarks Bar on your iPad Clear the Cache, History and Cookies in Safari for the iPad You’re probably used to clearing this kind of data right from within the browser. Not so with Safari on the iPad – but here’s how you can. How to clear the cache, history and cookies in Safari for iPad How to add more Apps to your iPad Dock The iPad has four icons in its ‘dock’. Did you know it can hold 6? How to add more Apps to your iPad Dock Convert PDF files to ePub files to read on your iPad with iBooks ePub is the format that iBooks are in. So for those of you with large eBook collections in PDF, here’s how you convert them to read in iBooks. How to convert PDF files to ePub files to read on your iPad with iBooks How to force your iPad to restart Has an app caused your iPad to freeze up, and you can’t escape? This tip shows you how to force your iPad to restart. How to force your iPad to restart How to export Keynote for iPad presentations to your Mac or PC Exporting Keynote presentations from your iPad to your Mac or PC isn’t as straight forward as you might have expected. This tutorial shows you how. How to export Keynote for iPad presentations to your Mac or PC How to import presentations to Keynote on your iPad Having trouble getting your presentations onto your iPad? How to import presentations to Keynote on your iPad How to import documents to Pages on your iPad This guide shows you how to transfer documents (MS Word or Pages) from your Mac/PC to your iPad. How to import documents to Pages on your iPad How to insert photos in a Pages document using iPad and share it as a PDF Want to spice up that doc with a picture you just took? This tutorial will show you how – and how to export that document as a PDF. How to insert photos in a Pages document using iPad and share it as a PDF How to lock your iPad If you have kids or co-workers/friends who think it’s funny to mess with your iPad – lock it. How to lock your iPad How to remove the “Sent from my iPad” signature from outgoing email on your iPad Does everyone need to know you just sent that email from your iPad? Probably not. This guide shows you how to remove the “Sent from my iPad” signature and replace it with your own (or none). How to remove the “Sent from my iPad” signature from outgoing email on your iPad How To Sync Multiple Calendars to the iPad With Google Sync This tutorial will show you a workaround on how to sync multiple calendars on your iPad using Google Sync. How to Sync Multiple Calendars to the iPad With Google Sync How to determine the MAC address of your iPad If your network restricts connections via MAC address – this guide will show you how to determine what yours is. How to determine the MAC address of your iPad How to take a screenshot of your iPad Do you need to take a screenshot of your iPad? This quick tip shows you how to do just that. How to take a screenshot of your iPad How to delete apps from your iPod Touch, iPhone or iPad Anyone who had an iPod Touch or iPhone before they had an iPad won’t need this tutorial. But if you’re new to the experience, this one will help. How to delete apps from your iPod Touch, iPhone or iPad How to determine the iPad ECID on Windows and Mac iPadintosh shows us how to determine the iPad’s ECID code – something you’ll want to have come Jailbreak time. How to grab the iPad ECID in Windows or OS X iPad Apps: Twitter and social networking essentials Enggadget has you covered with reviews of the first slew of iPad specific Twitter and other social networking apps. iPad Apps: Twitter and social networking essentials What does your website look like on an iPad? iPad Peek is a web based tool that allows you to enter any given URL, and it will display that page the same way Safari on the iPad does. Great for web site owners who don’t have access to an iPad. iPadPeek Stream Music and Videos to your iPad Gizmodo reviews the iPad app StreamToMe, which allows you to stream media from your Mac to your iPad across your local network. Their feelings in a nutshell – worth the $3, but not perfect. Review: StreamToMe for the iPad Apple iPad : Change links in Google Reader to point to full HTML webpage How to change links in Safari for iPad so that Google Reader points to a full HTML webpage How to connect an iPad to your existing wireless keyboard This video will show you how to connect your iPad to a wireless keyboard if you’re having any problems – and from the sound of things, quite a few folks are. via TUAW How to get started with the iPad Mashable has a very entry-level guide that will help you set up your iPad for the first time. Mashable’s Guide to Setting up the iPad Essential iPad Apps Downloadsquad gives mini-reviews to 8 iPad apps that you should install as soon as you get your iPad. iPad App Buyers Guide: Essential Apps you should get on day one Videos: The Official iPad Guided Tours From none other than Apple! Great getting started videos for all the included iPad apps. The Official iPad Guided Tours The Official iPad Manual When you buy an iPad, you don’t get a manual. But that’s not to say there isn’t one. Apple provides a 150 guide for your iPad in PDF format. The Official iPad Manual (pdf) How to print from your iPad Sure, it’s actually just an App (PrintCentral – $9.99 USD), but as of right now, it’s the only way. PrintCentral How to make your own iPad Wallpaper A perfectly detailed tutorial on how to make your own wallpaper for your iPad. The author also provides a really nice sample wallpaper, published under the Attribution-Noncommercial 2.0 Generic license. How to make your own iPad Wallpaper Got any more tips? Share them in the comments, and we’ll update the post with the links, or just the tip itself. Similar Articles Productive Geek Tips Want an iPad? How-To Geek is Giving One Away!Why Wait? Amazing New Add-on Turns Your iPhone into an iPad! [Comic]Clear the Auto-Complete Email Address Cache in OutlookAsk the Readers: Share Your Tips for Defeating Viruses and MalwareStupid Geek Tricks: Tile or Cascade Multiple Windows in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos

  Read the article

• OCR anything with OneNote 2007 and 2010

  - by Matthew Guay

  Quality OCR software can often be very expensive, but you may have one already installed on your computer that you didn’t know about.  Here’s how you can use OneNote to OCR anything on your computer. OneNote is one of the overlooked gems in recent versions of Microsoft Office.  OneNote makes it simple to take notes and keep track of everything with integrated search, and offers more features than its popular competitor Evernote.  One way it is better is its high quality optical character recognition (OCR) engine.  One of Evernote’s most popular features is that you can search for anything, including text in an image, and you can easily find it.  OneNote takes this further, and instantly OCRs any text in images you add.  Then, you can use this text easily and copy it from the image.  Let’s see how this works and how you can use OneNote as the ultimate OCR. Please Note: This feature is available in OneNote 2007 and 2010.  OneNote 2007 is included with Office 2007 Home and Student, Enterprise, and Ultimate, while OneNote 2010 is included with all edition of Office 2010 except for Starter edition. OCR anything First, let’s add something to OCR into OneNote.  There are many different ways you can add items to OCR into OneNote.  Open a blank page or one you want to insert something into, and then follow these steps to add what you want into OneNote. Picture Simply drag-and-drop a picture with text into a notebook… You can insert a picture directly from OneNote as well.  In OneNote 2010, select the Insert tab, and then choose Picture. In OneNote 2007, select the Insert menu, select Picture, and then choose From File.   Screen Clipping There are many times we’d like to copy text from something we see onscreen, but there is no direct way to copy text from that thing.  For instance, you cannot copy text from the title-bar of a window, or from a flash-based online presentation.  For these cases, the Screen Clipping option is very useful.  To add a clip of anything onscreen in OneNote 2010, select the Insert tab in the ribbon and click Screen Clipping. In OneNote 2007, either click the Clip button on the toolbar or select the Insert menu and choose Screen Clipping.   Alternately, you can take a screen clipping by pressing the windows key + S. When you click Screen Clipping, OneNote will minimize, your desktop will fade lighter, and your mouse pointer will change to a plus sign.  Now, click and drag over anything you want to add to OneNote.  Here we’re selecting the title of this article. The section you selected will now show up in your OneNote notebook, complete with the date and time the clip was made. Insert a file You’re not limited to pictures; OneNote can even OCR anything in most files on your computer.  You can add files directly in OneNote 2010 by selecting File Printout in the Insert tab. In OneNote 2007, select the Insert menu and choose Files as Printout. Choose the file you want to add to OneNote in the dialog. Select Insert, and OneNote will pause momentarily as it processes the file. Now your file will show up in OneNote as a printout with a link to the original file above it. You can also send any file directly to OneNote via the OneNote virtual printer.  If you have a file open, such as a PDF, that you’d like to OCR, simply open the print dialog in that program and select the “Send to OneNote” printer. Or, if you have a scanner, you can scan documents directly into OneNote by clicking Scanner Printout in the Insert tab in OneNote 2010. In OneNote 2003, to add a scanned document select the Insert menu, select Picture, and then choose From Scanner or Camera. OCR the image, file, or screenshot you put in OneNote Now that you’ve got your stuff into OneNote, let’s put it to work.  OneNote automatically did an OCR scan on anything you inserted into OneNote.  You can check to make sure by right-clicking on any picture, screenshot, or file you inserted.  Select “Make Text in Image Searchable” and then make sure the correct language is selected. Now, you can copy text from the Picture.  Simply right-click on the picture, and select “Copy Text from Picture”. And here’s the text that OneNote found in this picture: OCR anything with OneNote 2007 and 2010 - Windows Live Writer Not bad, huh?  Now you can paste the text from the picture into a document or anywhere you need to use the text. If you are instead copying text from a printout, it may give you the option to copy text from this page or all pages of the printout.   This works the exact same in OneNote 2007. In OneNote 2010, you can also edit the text OneNote has saved in the image from the OCR.  This way, if OneNote read something incorrectly you can change it so you can still find it when you use search in OneNote.  Additionally, you can copy only a specific portion of the text from the edit box, so it can be useful just for general copying as well.  To do this, right-click on the item and select “Edit Alt Text”. Here is the window to edit alternate text.  If you want to copy only a portion of the text, simply select it and press Ctrl+C to copy that portion. Searching OneNote’s OCR engine is very useful for finding specific pictures you have saved in OneNote.  Simply enter your search query in the search box on top right, and OneNote will automatically find all instances of that term in all of your notebooks.  Notice how it highlights the search term even in the image! This works the same in OneNote 2007.  Notice how it highlighted “How-to” in a shot of the header image in our favorite website. In Windows Vista and 7, you can even search for things OneNote OCRed from the Start Menu search.  Here the start menu search found the words “Windows Live Writer” in our OCR Test notebook in OneNote where we inserted the screen clip above. Conclusion OneNote is a very useful OCR tool, and can help you capture text from just about anything.  Plus, since you can easily search everything you have stored in OneNote, you can quickly find anything you insert anytime.  OneNote is one of the least-used Office tools, but we have found it very useful and hope you do too. Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteRemove Office 2010 Beta and Reinstall Office 2007How To Create and Publish Blog Posts in Word 2010 & 2007How To Copy Worksheets in Excel 2007 & 2010Add Page Numbers to Documents in Word 2007 & 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers

  Read the article

• Error on 64 Bit Install of IIS &ndash; LoadLibraryEx failed on aspnet_filter.dll

  - by Rick Strahl

  I’ve been having a few problems with my Windows 7 install and trying to get IIS applications to run properly in 64 bit. After installing IIS and creating virtual directories for several of my applications and firing them up I was left with the following error message from IIS: Calling LoadLibraryEx on ISAPI filter “c:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll” failed This is on Windows 7 64 bit and running on an ASP.NET 4.0 Application configured for running 64 bit (32 bit disabled). It’s also on what is essentially a brand new installation of IIS and Windows 7. So it failed right out of the box. The problem here is that IIS is trying to loading this ISAPI filter from the 32 bit folder – it should be loading from Framework64 folder note the Framework folder. The aspnet_filter.dll component is a small Win32 ISAPI filter used to back up the cookieless session state for ASP.NET on IIS 7 applications. It’s not terribly important because of this focus, but it’s a default loaded component. After a lot of fiddling I ended up with two solutions (with the help and support of some Twitter folks): Switch IIS to run in 32 bit mode Fix the filter listing in ApplicationHost.config Switching IIS to allow 32 Bit Code This is a quick fix for the problem above which enables 32 bit code in the Application Pool. The problem above is that IIS is trying to load a 32 bit ISAPI filter and enabling 32 bit code gets you around this problem. To configure your Application Pool, open the Application Pool in IIS Manager bring up Advanced Options and Enable 32 Bit Applications: And voila the error message above goes away. Fix Filters Enabling 32 bit code is a quick fix solution to this problem, but not an ideal one. If you’re running a pure .NET application that doesn’t need to do COM or pInvoke Interop with 32 bit apps there’s usually no need for enabling 32 bit code in an Application Pool as you can run in native 64 bit code. So trying to get 64 bit working natively is a pretty key feature in my opinion :-) So what’s the problem – why is IIS trying to load a 32 bit DLL in a 64 bit install, especially if the application pool is configured to not allow 32 bit code at all? The problem lies in the server configuration and the fact that 32 bit and 64 bit configuration settings exist side by side in IIS. If I open my Default Web Site (or any other root Web Site) and go to the ISAPI filter list here’s what I see: Notice that there are 3 entries for ASP.NET 4.0 in this list. Only two of them however are specifically scoped to the specifically to 32 bit or 64 bit. As you can see the 64 bit filter correctly points at the Framework64 folder to load the dll, while both the 32 bit and the ‘generic’ entry point at the plain Framework 32 bit folder. Aha! Hence lies our problem. You can edit ApplicationHost.config manually, but I ran into the nasty issue of not being able to easily edit that file with the 32 bit editor (who ever thought that was a good idea???? WTF). You have to open ApplicationHost.Config in a 64 bit native text editor – which Visual Studio is not. Or my favorite editor: EditPad Pro. Since I don’t have a native 64 bit editor handy Notepad was my only choice. Or as an alternative you can use the IIS 7.5 Configuration Editor which lets you interactively browse and edit most ApplicationHost settings. You can drill into the configuration hierarchy visually to find your keys and edit attributes and sub values in property editor type interface. I had no idea this tool existed prior to today and it’s pretty cool as it gives you some visual clues to options available – especially in absence of an Intellisense scheme you’d get in Visual Studio (which doesn’t work). To use the Configuration Editor go the Web Site root and use the Configuration Editor option in the Management Group. Drill into System.webServer/isapiFilters and then click on the Collection’s … button on the right. You should now see a display like this: which shows all the same attributes you’d see in ApplicationHost.config (cool!). These entries correspond to these raw ApplicationHost.config entries: <filter name="ASP.Net_4.0" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0" /> <filter name="ASP.Net_4.0_64bit" path="C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness64" /> <filter name="ASP.Net_4.0_32bit" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness32" /> The key attribute we’re concerned with here is the preCondition and the bitness subvalue. Notice that the ‘generic’ version – which comes first in the filter list – has no bitness assigned to it, so it defaults to 32 bit and the 32 bit dll path. And this is where our problem comes from. The simple solution to fix the startup problem is to remove the generic entry from this list here or in the filters list shown earlier and leave only the bitness specific versions active. The preCondition attribute acts as a filter and as you can see here it filters the list by runtime version and bitness value. This is something to keep an eye out in general – if a bitness values are missing it’s easy to run into conflicts like this with any settings that are global and especially those that load modules and handlers and other executable code. On 64 bit systems it’s a good idea to explicitly set the bitness of all entries or remove the non-specific versions and add bit specific entries. So how did this get misconfigured? I installed IIS before everything else was installed on this machine and then went ahead and installed Visual Studio. I suspect the Visual Studio install munged this up as I never saw a similar problem on my live server where everything just worked right out of the box. In searching about this problem a lot of solutions pointed at using aspnet_regiis –r from the Framework64 directory, but that did not fix this extra entry in the filters list – it adds the required 32 bit and 64 bit entries, but it doesn’t remove the errand un-bitness set entry. Hopefully this post will help out anybody who runs into a similar situation without having to trouble shoot all the way down into the configuration settings and noticing the bitness settings. It’s a good lesson learned for me – this is my first desktop install of a 64 bit OS and things like this are what I was reluctant to find. Now that I ran into this I have a good idea what to look for with 32/64 bit misconfigurations in IIS at least.© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

  Read the article

• This task is currently locked by a running workflow and cannot be edited. Limitation to both Nintex and SPD workflow

  - by ybbest

  Note, this post is from Nintex Forum here. These limitations apply to both SharePoint designer Workflow and Nintex Workflow as Nintex using the SharePoint workflow engine. The common cause that I experience is that ‘parent’ workflow is generating more than one task at once. This is common as you can have multiple approvers for certain approval process. You could also have workflow running when the task is created, one of the common scenario is you would like to set a custom column value in your approval task. For me this is huge limitation, as Nintex lover I really hope Nintex could solve this problem with Microsoft going forward. Introduction “This task is currently locked by a running workflow and cannot be edited” is a common message that is seen when an error occurs while the SharePoint workflow engine is processing a task item associated with a workflow. When a workflow processes a task normally, the following sequence of events is expected to occur: 1.       The process begins. 2.       The workflow places a ‘lock’ on the task so nothing else can change the values while the workflow is processing. 3.       The workflow processes the task. 4.       The lock is released when the task processing is finished. When the message is encountered, it usually indicates that an error occurred between step 2 and 4. As a result, the lock is never released. Therefore, the ‘task locked’ message is not an error itself, rather a symptom of another error – the ‘task locked’ message does not indicate what went wrong. In most cases, once this message is encountered, the workflow cannot be made to continue and must be terminated and started again. The following is a guide that can help troubleshoot the cause of these messages.  Some initial observations to narrow down the potential causes are: Is the error consistent or intermittent? When the error is consistent, it will happen every time the workflow is run. When it is intermittent, it may happen regularly, but not every time. Does the error occur the first time the user tries to respond to a task, or do they respond and notice the workflow does not continue, and when they respond again the error occurs? If the message is present when the user first responds to the task, the issue would have occurred when the task was created. Otherwise, it would have occurred when the user attempted to respond to the task. Causes Modifying the task list A cause of this error appearing consistently the first time a user tries to respond to a task is a modification to the default task list schema. For example, changing the ‘Assigned to’ field in a task list to be a multiple selection will cause the behaviour. Deleting the workflow task then restoring it from the Recycle bin If you start a workflow, delete the workflow task then restore it from the Recycle Bin in SharePoint, the workflow will fail with the ‘task locked’ error.  This is confirmed behaviour whether using a SharePoint Designer or a Nintex workflow.  You will need to terminate the workflow and start it again. Parallel simultaneous responses A cause of this error appearing inconsistently is multiple users responding to tasks in parallel at the same time. In this scenario, one task will complete correctly and the other will not process. When the user tries again, the ‘task locked’ message will display. Nintex included a workaround for this issue in build 11000. In build 11000 and later, one of the users will receive a message on the task form when they attempt to respond, stating that they need to try again in a few moments. Additional processing on the task A cause of this error appearing consistently and inconsistently is having an additional system running on the items in the task list. Some examples include: a workflow running on the task list, an event receiver running on the task list or another automated process querying and updating workflow tasks. Note: This Microsoft help article (http://office.microsoft.com/en-us/sharepointdesigner/HA102376561033.aspx#5) explains creating a workflow that runs on the task list to update a field on the task. Our experience shows that this causes the ‘Task Locked’ issues when the ‘parent’ workflow is generating more than one task at once. Isolated system error If the error is a rare event, or a ‘one off’ event, then an isolated system error may have occurred. For example, if there is a database connectivity issue while the workflow is processing the task response, the task will lock. In this case, the user will respond to a task but the workflow will not continue. When they respond again, the ‘task locked’ message will display. In this case, there will be an error in the SharePoint ULS Logs at the time that the user originally responded. Temporary delay while workflow processes If the workflow is taking a long time to process after a user submits a task, they may notice and try to respond to the task again. They will see the task locked error, but after a number of attempts (or after waiting some time) the task response page eventually indicates the task has been responded to. In this case, nothing actually went wrong, and the error message gives an accurate indication of what is happening – the workflow temporarily locked the task while it was processing. This scenario may occur in a very large workflow, or after the SharePoint application pool has just started. Modifying the task via a web service with an invalid url If the Nintex Workflow web service is used to respond to or delegate a task, the site context part of the url must be a valid alternative access mapping url. For example, if you access the web service via the IP address of the SharePoint server, and the IP address is not a valid AAM, the task can become locked. The workflow has become stuck without any apparent errors This behaviour can occur as a result of a bug in the SharePoint 2010 workflow engine.  If you do not have the August 2010 Cumulative Update (or later) for SharePoint, and your workflow uses delays, “Flexi-task”, State machine”, “Task Reminder” actions or variables, you could be affected. Check the SharePoint 2010 Updates site here: http://technet.microsoft.com/en-us/sharepoint/ff800847.  The October CU is recommended http://support.microsoft.com/kb/2553031.   The fix is described as “Consider the following scenario. You add a Delay activity to a workflow. Then, you set the duration for the Delay activity. You deploy the workflow in SharePoint Foundation 2010. In this scenario, the workflow is not resumed after the duration of the Delay activity”. If you find this is occurring in your environment, install the October CU, terminate all the running workflows affected and run them afresh. Investigative steps The first step to isolate the issue is to create a new task list on the site and configure the workflow to use it.  Any customizations that were made to the original task list should not be made to the new task list. If the new task list eliminates the issue, then the cause can be attributed to the original task list or a change that was made to it. To change the task list that the workflow uses: In Workflow Designer select Settings -> Startup Options Then configure the task list as required If any of the scenarios above do not help, check the SharePoint logs for any messages with a category of ‘Workflow Infrastructure’. Conclusion The information in this article has been gathered from observations and investigations by Nintex. The sources of these issues are the underlying SharePoint workflow engine. This article will be updated if further causes are discovered. From <http://connect.nintex.com/forums/thread/6503.aspx>

  Read the article

• Add keyboard languages to XP, Vista, and Windows 7

  - by Matthew Guay

  Do you regularly need to type in multiple languages in Windows?  Here we’ll show you the easy way to add and change input languages to your keyboard in XP, Vista, and Windows 7. Windows Vista and 7 come preinstalled with support for viewing a wide variety of languages, so adding an input language is fairly simply.  Adding an input language is slightly more difficult in XP, and requires installing additional files if you need an Asian or Complex script language.  First we show how to add an input language in Windows Vista and 7; it’s basically the same in both versions.  Then, we show how to add a language to XP, and also how to add Complex Script support.  Please note that this is only for adding an input language, which will allow you to type in the language you select.  This does not change your user interface language. Change keyboard language in Windows 7 and Vista It is fairly simple to add or change a keyboard language in Windows 7 or Vista.  In Windows 7, enter “keyboard language” in the Start menu search box, and select “Change keyboards or other input methods”. In Windows Vista, open Control Panel and enter “input language” in the search box and select “Change keyboards or other input methods”.  This also works in Windows 7. Now, click Change Keyboards to add another keyboard language or change your default one. Our default input language is US English, and our default keyboard is the US keyboard layout.  Click Add to insert another input language while still leaving your default input language installed. Here we selected the standard Thai keyboard language (Thai Kedmanee), but you can select any language you want.  Windows offers almost any language you can imagine, so just look for the language you want, select it, and click Ok. Alternately, if you want, you can click Preview to see your layout choice before accepting it.  This is only the default characters, not ones that will be activated with Shift or other keys (many Asian languages use many more characters than English, and require the use of Shift and other keys to access them all).  Once your finished previewing, click close and then press Ok on the previous dialog. Now you will see both of your keyboard languages in the Installed services box.  You can click Add to go back and get more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Also, you can now change the default input language from the top menu.  This is the language that your keyboard will start with when you boot your computer.  So, if you mainly use English but also use another language, usually it is best to leave English as your default input language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages.  Alternately you can switch input languages by pressing Alt+Shift on your keyboard. Some complex languages, such as Chinese, may have extra buttons to change input modes to accommodate their large alphabet. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and select the “Advanced Key Settings” tab.  Here you can change settings for Caps Lock and change or add key sequences to change between languages. Also, the On-Screen keyboard will display the correct keyboard language (here the keyboard is displaying Thai), which can be a helpful reference if your physical keyboard doesn’t have your preferred input language printed on it.  To open this, simply enter “On-Screen keyboard” in the start menu search, or click All Programs>Accessories>On-Screen keyboard. Change keyboard language in Windows XP The process for changing the keyboard language in Windows XP is slightly different.  Open Control Panel, and select “Date, Time, Language, and Regional Options”.   Select “Add other languages”. Now, click Details to add another language.  XP does not include support for Asian and complex languages by default, so if you need to add one of those languages we have details for that below. Click Add to add an input language. Select your desired language from the list, and choose your desired keyboard layout if your language offers multiple layouts.  Here we selected Canadian French with the default layout. Now you will see both of your keyboard languages in the Installed services box.  You can click Add to go back and add more, or move your selected language up or down (to change its priority), or simply click Apply to add the new language. Once you’ve pressed Apply or Ok, you will see a new icon beside your system tray with the initials of your default input language. If you click it, you can switch between input languages.  Alternately you can switch input languages by pressing Alt+Shift on your keyboard. If you would like to change the keyboard shortcut for changing languages, go back to the Input Languages dialog, and click the “Key Settings” button on the bottom of the dialog.  Here you can change settings for Caps Lock and change or add key sequences to change between languages. Add support to XP for Asian and Complex script languages Windows XP does not include support for Asian and Complex script languages by default, but you can easily add them to your computer.  This is useful if you wish to type in one of these languages, or simply want to read text written in these languages, since XP will not display these languages correctly if they are not installed.  If you wish to install Chinese, Japanese, and/or Korean, check the “Install files for East Asian languages” box.  Or, if you need to install a complex script language (including Arabic, Armenian, Georgian, Hebrew, the Indic languages, Thai, and Vietnamese), check the “Install files for complex script and right-to-left languages” box.   Choosing either of these options will open a prompt reminding you that this option will take up more disk space.  Support for complex languages will require around 10Mb of hard drive space, but East Asian language support may require 230 Mb or more free disk space.  Click Ok, and click apply to install your language files. You may have to insert your XP CD into your CD drive to install these files.  Insert the disk, and then click Ok. Windows will automatically copy the files, including fonts for these languages… …and then will ask you to reboot your computer to finalize the settings.  Click Yes, and then reopen the “Add other languages” dialog when your computer is rebooted, and add a language as before.     Now you can add Complex and/or Asian languages to XP, just as above.  Here is the XP taskbar language selector with Thai installed. Conclusion Unfortunately we haven’t found a way to add Asian and complex languages in XP without having an XP disc. If you know of a way, let us know in the comments. (No downloading the XP disc from torrent site answers please) Adding an input language is very important for bilingual individuals, and can also be useful if you simply need to occasionally view Asian or Complex languages in XP.  And by following the correct instructions for your version of Windows, it should be very easy to add, change, and remove input languages. Similar Articles Productive Geek Tips Show Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut ArticlesAnother Desktop Cube for Windows XP/VistaThe "Up" Keyboard Shortcut for Windows 7 or Vista ExplorerWhat is ctfmon.exe And Why Is It Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Scan a Windows PC for Viruses from a Ubuntu Live CD

  - by Trevor Bekolay

  Getting a virus is bad. Getting a virus that causes your computer to crash when you reboot is even worse. We’ll show you how to clean viruses from your computer even if you can’t boot into Windows by using a virus scanner in a Ubuntu Live CD. There are a number of virus scanners available for Ubuntu, but we’ve found that avast! is the best choice, with great detection rates and usability. Unfortunately, avast! does not have a proper 64-bit version, and forcing the install does not work properly. If you want to use avast! to scan for viruses, then ensure that you have a 32-bit Ubuntu Live CD. If you currently have a 64-bit Ubuntu Live CD on a bootable flash drive, it does not take long to wipe your flash drive and go through our guide again and select normal (32-bit) Ubuntu 9.10 instead of the x64 edition. For the purposes of fixing your Windows installation, the 64-bit Live CD will not provide any benefits. Once Ubuntu 9.10 boots up, open up Firefox by clicking on its icon in the top panel. Navigate to http://www.avast.com/linux-home-edition. Click on the Download tab, and then click on the link to download the DEB package. Save it to the default location. While avast! is downloading, click on the link to the registration form on the download page. Fill in the registration form if you do not already have a trial license for avast!. By the time you’ve filled out the registration form, avast! will hopefully be finished downloading. Open a terminal window by clicking on Applications in the top-left corner of the screen, then expanding the Accessories menu and clicking on Terminal. In the terminal window, type in the following commands, pressing enter after each line. cd Downloadssudo dpkg –i avast* This will install avast! on the live Ubuntu environment. To ensure that you can use the latest virus database, while still in the terminal window, type in the following command: sudo sysctl –w kernel.shmmax=128000000 Now we’re ready to open avast!. Click on Applications on the top-left corner of the screen, expand the Accessories folder, and click on the new avast! Antivirus item. You will first be greeted with a window that asks for your license key. Hopefully you’ve received it in your email by now; open the email that avast! sends you, copy the license key, and paste it in the Registration window. avast! Antivirus will open. You’ll notice that the virus database is outdated. Click on the Update database button and avast! will start downloading the latest virus database. To scan your Windows hard drive, you will need to “mount” it. While the virus database is downloading, click on Places on the top-left of your screen, and click on your Windows hard drive, if you can tell which one it is by its size. If you can’t tell which is the correct hard drive, then click on Computer and check out each hard drive until you find the right one. When you find it, make a note of the drive’s label, which appears in the menu bar of the file browser. Also note that your hard drive will now appear on your desktop. By now, your virus database should be updated. At the time this article was written, the most recent version was 100404-0. In the main avast! window, click on the radio button next to Selected folders and then click on the “+” button to the right of the list box. It will open up a dialog box to browse to a location. To find your Windows hard drive, click on the “>” next to the computer icon. In the expanded list, find the folder labelled “media” and click on the “>” next to it to expand it. In this list, you should be able to find the label that corresponds to your Windows hard drive. If you want to scan a certain folder, then you can go further into this hierarchy and select that folder. However, we will scan the entire hard drive, so we’ll just press OK. Click on Start scan and avast! will start scanning your hard drive. If a virus is found, you’ll be prompted to select an action. If you know that the file is a virus, then you can Delete it, but there is the possibility of false positives, so you can also choose Move to chest to quarantine it. When avast! is done scanning, it will summarize what it found on your hard drive. You can take different actions on those files at this time by right-clicking on them and selecting the appropriate action. When you’re done, click Close. Your Windows PC is now free of viruses, in the eyes of avast!. Reboot your computer and with any luck it will now boot up! Alternatives to avast! If avast! and a liberal amount of Googling doesn’t fix your problem, it’s possible that a different virus scanner will fix your obscure issue. Here are a list of other virus scanners available for Ubuntu that are either free or offer free trials. See their support forums for help on installing these virus scanners. Avira AntiVir Personal for Linux / Solaris Panda Antivirus for Linux Installation and usage guide from Ubuntu F-PROT Antivirus for Linux ClamAV installation and usage guide from Ubuntu NOD32 Antivirus for Linux Kaspersky Anti-Virus 2010 Bitdefender Antivirus for Unices Conclusion Running avast! from a Ubuntu Live CD can clean the vast majority of viruses from your Windows PC. This is another reason to always have a Ubuntu Live CD ready just in case something happens to your Windows installation! Similar Articles Productive Geek Tips Secure Computing: Windows Live OneCareHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareUse the Windows Key for the "Start" Menu in Ubuntu LinuxScan Files for Viruses Before You Download With Dr.WebAsk the Readers: Share Your Tips for Defeating Viruses and Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

  Read the article

• How To Activate Your Free Office 2007 to 2010 Tech Guarantee Upgrade

  - by Matthew Guay

  Have you purchased Office 2007 since March 5th, 2010?  If so, here’s how you can activate and download your free upgrade to Office 2010! Microsoft Office 2010 has just been released, and today you can purchase upgrades from most retail stores or directly from Microsoft via download.  But if you’ve purchased a new copy of Office 2007 or a new computer that came with Office 2007 since March 5th, 2010, then you’re entitled to an absolutely free upgrade to Office 2010.  You’ll need enter information about your Office 2007 and then download the upgrade, so we’ll step you through the process. Getting Started First, if you’ve recently purchased Office 2007 but haven’t installed it, you’ll need to go ahead and install it before you can get your free Office 2010 upgrade.  Install it as normal.   Once Office 2007 is installed, run any of the Office programs.  You’ll be prompted to activate Office.  Make sure you’re connected to the internet, and then click Next to activate. Get your Free Upgrade to Office 2010 Now you’re ready to download your upgrade to Office 2010.  Head to the Office Tech Guarantee site (link below), and click Upgrade now. You’ll need to enter some information about your Office 2007.  Check that you purchased your copy of Office 2007 after March 5th, select your computer manufacturer, and check that you agree to the terms. Now you’re going to need the Product ID number from Office 2007.  To find this, open Word or any other Office 2007 application.  Click the Office Orb, and select Options on the bottom. Select the Resources button on the left, and then click About. Near the bottom of this dialog, you’ll see your Product ID.  This should be a number like: 12345-123-1234567-12345   Go back to the Office Tech Guarantee signup page in your browser, and enter this Product ID.  Select the language of your edition of Office 2007, enter the verification code, and then click Submit. It may take a few moments to validate your Product ID. When it is finished, you’ll be taken to an order page that shows the edition of Office 2010 you’re eligible to receive.  The upgrade download is free, but if you’d like to purchase a backup DVD of Office 2010, you can add it to your order for $13.99.  Otherwise, simply click Continue to accept. Do note that the edition of Office 2010 you receive may be different that the edition of Office 2007 you purchased, as the number of editions has been streamlined in the Office 2010 release.  Here’s a chart you can check to see what edition you’ll receive.  Note that you’ll still be allowed to install Office on the same number of computers; for example, Office 2007 Home and Student allows you to install it on up to 3 computers in the same house, and your Office 2010 upgrade will allow the same. Office 2007 Edition Office 2010 Upgrade You’ll Receive Office 2007 Home and Student Office Home and Student 2010 Office Basic 2007Office Standard 2007 Office Home and Business 2010 Office Small Business 2007Office Professional 2007Office Ultimate 2007 Office Professional 2010 Office Professional 2007 AcademicOffice Ultimate 2007 Academic Office Professional Academic 2010 Sign in with your Windows Live ID, or create a new one if you don’t already have one. Enter your name, select your country, and click Create My Account.  Note that Office will send Office 2010 tips to your email address; if you don’t wish to receive them, you can unsubscribe from the emails later.   Finally, you’re ready to download Office 2010!  Click the Download Now link to start downloading Office 2010.  Your Product Key will appear directly above the Download link, so you can copy it and then paste it in the installer when your download is finished.  You will additionally receive an email with the download links and product key, so if your download fails you can always restart it from that link. If your edition of Office 2007 included the Office Business Contact Manager, you will be able to download it from the second Download link.  And, of course, even if you didn’t order a backup DVD, you can always burn the installers to a DVD for a backup.   Install Office 2010 Once you’re finished downloading Office 2010, run the installer to get it installed on your computer.  Enter your Product Key from the Tech Guarantee website as above, and click Continue. Accept the license agreement, and then click Upgrade to upgrade to the latest version of Office.   The installer will remove all of your Office 2007 applications, and then install their 2010 counterparts.  If you wish to keep some of your Office 2007 applications instead, click Customize and then select to either keep all previous versions or simply keep specific applications. By default, Office 2010 will try to activate online automatically.  If it doesn’t activate during the install, you’ll need to activate it when you first run any of the Office 2010 apps.   Conclusion The Tech Guarantee makes it easy to get the latest version of Office if you recently purchased Office 2007.  The Tech Guarantee program is open through the end of September, so make sure to grab your upgrade during this time.  Actually, if you find a great deal on Office 2007 from a major retailer between now and then, you could also take advantage of this program to get Office 2010 cheaper. And if you need help getting started with Office 2010, check out our articles that can help you get situated in your new version of Office! Link Activate and Download Your free Office 2010 Tech Guarantee Upgrade Similar Articles Productive Geek Tips Remove Office 2010 Beta and Reinstall Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideCenter Pictures and Other Objects in Office 2007 & 2010Change the Default Color Scheme in Office 2010Show Two Time Zones in Your Outlook 2007 Calendar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide

  Read the article

• Our Look at Opera 10.50 Web Browser

  - by Asian Angel

  Everyone has been talking about the newest version of Opera recently but perhaps you have not looked at it too closely yet. Today we will take a look at 10.50 and let you see what this “new browser” is all about. The New Engines Carakan JavaScript Engine: Runs web applications up to 7 times faster than its predecessor Futhark Vega Graphics Library: Enables super fast and smooth graphics on everything from tab switching to webpage animation Presto 2.5: Provides support for HTML5, CSS2.1 and the latest CSS3 standards A Look at the Features Available If you have installed or used older versions of Opera before then the default look after a clean install will probably seem rather different. The main differences in appearance are mainly located within the “glass border” areas of the browser. The “Speed Dial” setup looks and works just as well as in previous versions. You can set a favorite wallpaper or image as your background and choose the number of “dials” using the “Configure Speed Dial Command”. One of the “standout” differences is the “O Button”. All of the menus have been condensed into this single access point but it only takes a few moments to find what you are looking for. If you have used the style before in earlier versions of Opera some of the items have been moved around. For those who prefer the “Menu Bar” that can be easily restored using the “Show Menu Bar Command”. If desired you can actually “extend” the “Tab Bar” downwards to display thumbnails of your open tabs. Just use your mouse to grab the bottom of the “Tab Bar” and adjust it to suit your personal needs. The only problem with this feature is that it will quickly use up a good sized portion of your available UI and browser window space. The “Password Manager” is ready to access when needed…the background for the button will turn a shiny metallic blue when you open a webpage that you have “Login Information” saved for. One of the new features is a small “Recycle Bin Button” in the upper right corner. Clicking on this will display a list of recently closed tabs letting you have easy access to any tabs that you may have accidentally closed. This is definitely a great feature to have as an easy access button. For those who were used to how the “Zoom Feature” looked before it has a new “look” to it. Instead of the pop-up menu-type listing of “view sizes” present before you now have a slider button that you can use to adjust the zooming level. For our default setup here the “Sidebar Panels” available were: “Bookmarks, Widgets, Unite, Notes, Downloads, History, & Panels”. Additional panels such as “Links, Windows, Search, Info, etc.” are available if you want and/or need them (accessible using the “Panels Plus Sign Button”). The “Opera Link Button” makes it easy for you to synchronize your “Speed Dial, Bookmarks, Personal Bar, Custom Searches, History & Notes”. Note: “Opera Link” requires an account and can be signed up for using the link provided below. Want to share files with your family and friends? “Unite” allows you to do that and more. With “Unite” you can: “Stream Music, Show Photo Galleries, Share Files and/or Folders, & host webpages directly from your browser”. We have a more in-depth look at “Unite” in our article here. Note: Use of “Unite” requires an Opera account. Got a slow internet connection? “Opera Turbo” can help with that by running the web traffic through their “compression servers” to speed up your web browsing. Keep in mind that “Opera Turbo” will not engage if you are accessing a secure website (i.e. your bank’s website) thus preserving your security. Note: “Opera Turbo” can be set up to automatically detect slow internet connections (i.e. crowded Wi-Fi in a cafe). Opera has a built-in “Private Browsing Mode” now for those who prefer anonymous browsing and want to keep the “history records clean” on their computer. To access it go to “Tabs and windows” and select “New private tab” or “New private window” as desired. When you open your new “Private Tab or Window” you will see the following message with details on how Opera will handle browsing information and a large “door hanger symbol”. Notice that the one tab is locked into “Private Browsing Mode” while the others are still working in “Regular Browsing Mode”. Very nice! A miniature version of the “door hanger symbol” will be present on any tab that is locked into “Private Browsing Mode”. If you are using Windows 7 then you will love how things look from your “Taskbar”. Here you can see four very nice looking thumbnails for the tabs that we had open. All that you have to do is click on the desired thumbnail… The “Context Menu” looks just as lovely as the thumbnails and definitely has some terrific functionality built into it. Add Enhanced Aero Capability If you love “Aero” and want more for your new Opera install then we have the perfect theme for you. The theme’s name is Z1-AV69 and once you have downloaded it you will need to place it in the “Skins Subfolder” in Opera’s “Program Files Folder”. Note: For our example we used version 1.10 but version 2.00 is now available (link provided below). Once you have restarted Opera, go to the “O Menu” and select “Appearance”. When the “Appearance Window” opens click on “Z1-Glass Skin” and then click “OK”. All of a sudden you will have more “Aero Goodness” to enjoy. Compare this screenshot with the one at the top of this article…the only part that is not transparent now is the browser window area itself. Want even more “Aero Goodness”? Right click on the “Tab Bar” and set “Tab Bar Placement” to “Left”. Note: You can achieve the same effect by setting the “Tab Bar Placement” to “Right”. With the “Speed Dial” visible you will be able to see your wallpaper with ease. While this is obviously not for everyone it does make for a great visual trick. Portable Versions Perhaps you need this wonderful new version of Opera to go with you wherever you do during the day. Not a problem…just visit the Opera USB website to choose a version that works best for you. You can select from “Zip or Exe” setup files and if needed update an older portable version using a “Zipped Update Files Package”. If you are updating an older version keep in mind that you will need to delete the old “OperaUSB.exe. File” due to changes with the new setup files. During our tests updating older portable versions went well for the most part but we did experience a few “odd UI quirks” here and there…so we recommend setting up a clean install if possible. Conclusion The new 10.50 release is a pleasure to use and is a recommended install for your system. Whether you are considering trying Opera for the first time or have been using it for a bit we think that you will pleased with everything that the 10.50 release has to offer. For those who would like to add User Scripts to Opera be certain to look at our how-to article here. Links Download Opera 10.50 for your location (Windows) Get the latest Snapshot versions for Linux & Mac Sign up for an Opera Link account View In-Depth detail on Opera 10.50’s features Download the Z1-AV69 Aero Theme Download Portable Opera 10.50 Similar Articles Productive Geek Tips Set the Speed Dial as the Opera Startup PageSet Up User Scripts in Opera BrowserScan Files for Viruses Before You Download With Dr.WebTurn Your Computer into a File, Music, and Web Server with Opera UniteSet the Default Browser on Ubuntu From the Command Line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Create a Bootable Ubuntu 9.10 USB Flash Drive

  - by Trevor Bekolay

  The Ubuntu Live CD isn’t just useful for trying out Ubuntu before you install it, you can also use it to maintain and repair your Windows PC. Even if you have no intention of installing Linux, every Windows user should have a bootable Ubuntu USB drive on hand in case something goes wrong in Windows. Creating a bootable USB flash drive is surprisingly easy with a small self-contained application called UNetbootin. It will even download Ubuntu for you! Note: Ubuntu will take up approximately 700 MB on your flash drive, so choose a flash drive with at least 1 GB of free space, formatted as FAT32. This process should not remove any existing files on the flash drive, but to be safe you should backup the files on your flash drive. Put Ubuntu on your flash drive UNetbootin doesn’t require installation; just download the application and run it. Select Ubuntu from the Distribution drop-down box, then 9.10_Live from the Version drop-down box. If you have a 64-bit machine, then select 9.10_Live_x64 for the Version. At the bottom of the screen, select the drive letter that corresponds to the USB drive that you want to put Ubuntu on. If you select USB Drive in the Type drop-down box, the only drive letters available will be USB flash drives. Click OK and UNetbootin will start doing its thing. First it will download the Ubuntu Live CD. Then, it will copy the files from the Ubuntu Live CD to your flash drive. The amount of time it takes will vary depending on your Internet speed, an when it’s done, click on Exit. You’re not planning on installing Ubuntu right now, so there’s no need to reboot. If you look at the USB drive now, you should see a bunch of new files and folders. If you had files on the drive before, they should still be present. You’re now ready to boot your computer into Ubuntu 9.10! How to boot into Ubuntu When the time comes that you have to boot into Ubuntu, or if you just want to test and make sure that your flash drive works properly, you will have to set your computer to boot off of the flash drive. The steps to do this will vary depending on your BIOS – which varies depending on your motherboard. To get detailed instructions on changing how your computer boots, search for your motherboard’s manual (or your laptop’s manual for a laptop). For general instructions, which will suffice for 99% of you, read on. Find the important keyboard keys When your computer boots up, a bunch of words and numbers flash across the screen, usually to be ignored. This time, you need to scan the boot-up screen for a few key words with some associated keys: Boot menu and Setup. Typically, these will show up at the bottom of the screen. If your BIOS has a Boot Menu, then read on. Otherwise, skip to the Hard: Using Setup section. Easy: Using the Boot Menu If your BIOS offers a Boot Menu, then during the boot-up process, press the button associated with the Boot Menu. In our case, this is ESC. Our example Boot Menu doesn’t have the ability to boot from USB, but your Boot Menu should have some options, such as USB-CDROM, USB-HDD, USB-FLOPPY, and others. Try the options that start with USB until you find one that works. Don’t worry if it doesn’t work – you can just restart and try again. Using the Boot Menu does not change the normal boot order on your system, so the next time you start up your computer it will boot from the hard drive as normal. Hard: Using Setup If your BIOS doesn’t offer a Boot Menu, then you will have to change the boot order in Setup. Note: There are some options in BIOS Setup that can affect the stability of your machine. Take care to only change the boot order options. Press the button associated with Setup. In our case, this is F2. If your BIOS Setup has a Boot tab, then switch to it and change the order such that one of the USB options occurs first. There may be several USB options, such as USB-CDROM, USB-HDD, USB-FLOPPY, and others; try them out to see which one works for you. If your BIOS does not have a boot tab, boot order is commonly found in Advanced CMOS Options. Note that this changes the boot order permanently until you change it back. If you plan on only plugging in a bootable flash drive when you want to boot from it, then you could leave the boot order as it is, but you may find it easier to switch the order back to the previous order when you reboot from Ubuntu. Booting into Ubuntu If you set the right boot option, then you should be greeted with the UNetbootin screen. Press enter to start Ubuntu with the default options, or wait 10 seconds for this to happen automatically. Ubuntu will start loading. It should go straight to the desktop with no need for a username or password. And that’s it! From this live desktop session, you can try out Ubuntu, and even install software that is not included in the live CD. Installed software will only last for the duration of your session – the next time you start up the live CD it will be back to its original state. Download UNetbootin from sourceforge.net Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7Speed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer Create Talking Photos using Fotobabble

  Read the article

• Getting Started with Boxee

  - by DigitalGeekery

  Boxee is a free Media PC application that runs on Windows, Mac, and Ubuntu Linux. With Boxee, you can integrate online video, music and pictures, with your own local media and social networking. Today we are going to take a closer look at Boxee and some of it’s features. Note: We used Windows 7 for this tutorial. Your experience on a Mac or Ubuntu Linux build may vary slightly. Hardware Requirements x86 (Intel/AMD processor) based system running at 1.0GHz or greater 512MB system memory (RAM) or more Video card capable of OpenGL 1.4, Direct X 9.0 Software Requirements Mac OS X 10.4+ (Intel based processor) Ubuntu Linux 9.04+ x86 only Windows XP / Vista / 7 (64 bit in Vista or 7) Installing Boxee Before downloading and installing Boxee, you’ll need to register for a free account. (See link below) Once your account is registered and verified, you’ll be able to log in and download the application. Installation is pretty straightforward…just take the defaults. Boxee will open in full screen mode and you’ll be prompted to login with your username and password. Before you login, you may want to take a moment to click on the “Guide” icon and learn a bit about navigating in Boxee. Some basic keyboard navigation is as follows. Move right, left, up, & down with the arrow keys. Hit “Enter” to make a selection, the forward slash key “\” to toggle between full screen and windowed mode, and “Esc” to go back to the previous screen. For Playback, the volume is controlled by plus & minus (+/-) keys, you can Play / Pause using the spacebar, and skip using the arrow keys. Boxee will also work with any infrared remote. If you have an iPhone or iPod Touch you can download software to enable them as a Boxee remote. If you’re using a mouse and keyboard, hover over the username and password boxes to enter your login credentials. If using a a remote, click your OK button and enter credentials with the on screen keyboard. Click “Done” when finished.   When you are ready to login, enter your credentials and click “Login.” On first login, you’ll be prompted to calibrate your screen. If you choose “Skip” you can always calibrate your screen later under Settings > Appearance > Screen. When Boxee opens, you’ll be greeted by the Home screen. To the left will be your Feeds. This will be any recommended content from friends on Boxee, and social networks such as Facebook and Twitter. Although, when you first login, it will mainly be info from the Boxee staff. You’ll have “Featured” content in the center and your Queue on the right. You’ll also have the Menu along the top.   Pop Up Menu The Pop Menu can be accessed by hitting the “Esc” key, or back on your remote. Depending on where you are located in Boxee, you may have to hit it a few time to “back out” to the Pop Up menu. From the Pop Up Menu, you can easily access any of the resources, settings, and favorites. Queue The Queue is your playlist of TV shows, movies, or Internet videos you wish to watch. When you find an offering you’d like to watch, select it and then click “Add to Queue.” The selected item will be added to your Queue and can be accessed at any time from the Menu. TV Show Library The TV Show library can contain files from your local hard drive or streaming content from the Web. Boxee pulls content from a variety of online locations such as Hulu and TV network sites. Click on the show to see which specific episodes are currently available. To search for your favorite shows, click on the yellow arrow to the left, or navigate to the left with your keyboard or remote. Enter your selection into the search box. My Apps By default, the “My Apps” section includes a list of the most popular apps, such as Netflix, Pandora, YouTube, and others. You can remove Apps from “My Apps,” or add new Apps from the Apps Library.   To access all the available Apps, click on the left arrow button, or click on the yellow arrow at the left, then select “App Library.” Choose an App from the Library and click it to open… … and then select “Add to My Apps.” Or, you can click start to play the App if you don’t wish to Add it to your “My Apps.”   Music, Pictures, and Movies Boxee will scan your PC for movies, pictures, and music. You can choose to scan specific folders by clicking on “Scan Media Folders…” … or from the Pop Up Menu, selecting Settings > Media, and then browsing for your media.   Conclusion Boxee to be a great way to integrate your local media with online streaming content. It can be run as an application on your home PC, or as a stand alone media PC. It should also be noted, however, that your access to online content will vary depending on your country. If you are a Windows Media Center user and and want to add the additional features of Boxee, check out our article on integrating Boxee with Windows 7 Media Center. Download Boxee Similar Articles Productive Geek Tips Integrate Boxee with Media Center in Windows 7Disable Fast User Switching on Windows XPOops! Sorry About the Feed ErrorsDisplay a list of Started Services from the Command Line (Windows)Feedburner to Google: Worst Transition Ever. TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Parallelism in .NET – Part 14, The Different Forms of Task

  - by Reed

  Before discussing Task creation and actual usage in concurrent environments, I will briefly expand upon my introduction of the Task class and provide a short explanation of the distinct forms of Task.  The Task Parallel Library includes four distinct, though related, variations on the Task class. In my introduction to the Task class, I focused on the most basic version of Task.  This version of Task, the standard Task class, is most often used with an Action delegate.  This allows you to implement for each task within the task decomposition as a single delegate. Typically, when using the new threading constructs in .NET 4 and the Task Parallel Library, we use lambda expressions to define anonymous methods.  The advantage of using a lambda expression is that it allows the Action delegate to directly use variables in the calling scope.  This eliminates the need to make separate Task classes for Action<T>, Action<T1,T2>, and all of the other Action<…> delegate types.  As an example, suppose we wanted to make a Task to handle the ”Show Splash” task from our earlier decomposition.  Even if this task required parameters, such as a message to display, we could still use an Action delegate specified via a lambda: // Store this as a local variable string messageForSplashScreen = GetSplashScreenMessage(); // Create our task Task showSplashTask = new Task( () => { // We can use variables in our outer scope, // as well as methods scoped to our class! this.DisplaySplashScreen(messageForSplashScreen); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This provides a huge amount of flexibility.  We can use this single form of task for any task which performs an operation, provided the only information we need to track is whether the task has completed successfully or not.  This leads to my first observation: Use a Task with a System.Action delegate for any task for which no result is generated. This observation leads to an obvious corollary: we also need a way to define a task which generates a result.  The Task Parallel Library provides this via the Task<TResult> class. Task<TResult> subclasses the standard Task class, providing one additional feature – the ability to return a value back to the user of the task.  This is done by switching from providing an Action delegate to providing a Func<TResult> delegate.  If we decompose our problem, and we realize we have one task where its result is required by a future operation, this can be handled via Task<TResult>.  For example, suppose we want to make a task for our “Check for Update” task, we could do: Task<bool> checkForUpdateTask = new Task<bool>( () => { return this.CheckWebsiteForUpdate(); }); Later, we would start this task, and perform some other work.  At any point in the future, we could get the value from the Task<TResult>.Result property, which will cause our thread to block until the task has finished processing: // This uses Task<bool> checkForUpdateTask generated above... // Start the task, typically on a background thread checkForUpdateTask.Start(); // Do some other work on our current thread this.DoSomeWork(); // Discover, from our background task, whether an update is available // This will block until our task completes bool updateAvailable = checkForUpdateTask.Result; This leads me to my second observation: Use a Task<TResult> with a System.Func<TResult> delegate for any task which generates a result. Task and Task<TResult> provide a much cleaner alternative to the previous Asynchronous Programming design patterns in the .NET framework.  Instead of trying to implement IAsyncResult, and providing BeginXXX() and EndXXX() methods, implementing an asynchronous programming API can be as simple as creating a method that returns a Task or Task<TResult>.  The client side of the pattern also is dramatically simplified – the client can call a method, then either choose to call task.Wait() or use task.Result when it needs to wait for the operation’s completion. While this provides a much cleaner model for future APIs, there is quite a bit of infrastructure built around the current Asynchronous Programming design patterns.  In order to provide a model to work with existing APIs, two other forms of Task exist.  There is a constructor for Task which takes an Action<Object> and a state parameter.  In addition, there is a constructor for creating a Task<TResult> which takes a Func<Object, TResult> as well as a state parameter.  When using these constructors, the state parameter is stored in the Task.AsyncState property. While these two overloads exist, and are usable directly, I strongly recommend avoiding this for new development.  The two forms of Task which take an object state parameter exist primarily for interoperability with traditional .NET Asynchronous Programming methodologies.  Using lambda expressions to capture variables from the scope of the creator is a much cleaner approach than using the untyped state parameters, since lambda expressions provide full type safety without introducing new variables.

  Read the article

• Parallelism in .NET – Part 15, Making Tasks Run: The TaskScheduler

  - by Reed

  In my introduction to the Task class, I specifically made mention that the Task class does not directly provide it’s own execution.  In addition, I made a strong point that the Task class itself is not directly related to threads or multithreading.  Rather, the Task class is used to implement our decomposition of tasks.  Once we’ve implemented our tasks, we need to execute them.  In the Task Parallel Library, the execution of Tasks is handled via an instance of the TaskScheduler class. The TaskScheduler class is an abstract class which provides a single function: it schedules the tasks and executes them within an appropriate context.  This class is the class which actually runs individual Task instances.  The .NET Framework provides two (internal) implementations of the TaskScheduler class. Since a Task, based on our decomposition, should be a self-contained piece of code, parallel execution makes sense when executing tasks.  The default implementation of the TaskScheduler class, and the one most often used, is based on the ThreadPool.  This can be retrieved via the TaskScheduler.Default property, and is, by default, what is used when we just start a Task instance with Task.Start(). Normally, when a Task is started by the default TaskScheduler, the task will be treated as a single work item, and run on a ThreadPool thread.  This pools tasks, and provides Task instances all of the advantages of the ThreadPool, including thread pooling for reduced resource usage, and an upper cap on the number of work items.  In addition, .NET 4 brings us a much improved thread pool, providing work stealing and reduced locking within the thread pool queues.  By using the default TaskScheduler, our Tasks are run asynchronously on the ThreadPool. There is one notable exception to my above statements when using the default TaskScheduler.  If a Task is created with the TaskCreationOptions set to TaskCreationOptions.LongRunning, the default TaskScheduler will generate a new thread for that Task, at least in the current implementation.  This is useful for Tasks which will persist for most of the lifetime of your application, since it prevents your Task from starving the ThreadPool of one of it’s work threads. The Task Parallel Library provides one other implementation of the TaskScheduler class.  In addition to providing a way to schedule tasks on the ThreadPool, the framework allows you to create a TaskScheduler which works within a specified SynchronizationContext.  This scheduler can be retrieved within a thread that provides a valid SynchronizationContext by calling the TaskScheduler.FromCurrentSynchronizationContext() method. This implementation of TaskScheduler is intended for use with user interface development.  Windows Forms and Windows Presentation Foundation both require any access to user interface controls to occur on the same thread that created the control.  For example, if you want to set the text within a Windows Forms TextBox, and you’re working on a background thread, that UI call must be marshaled back onto the UI thread.  The most common way this is handled depends on the framework being used.  In Windows Forms, Control.Invoke or Control.BeginInvoke is most often used.  In WPF, the equivelent calls are Dispatcher.Invoke or Dispatcher.BeginInvoke. As an example, say we’re working on a background thread, and we want to update a TextBlock in our user interface with a status label.  The code would typically look something like: // Within background thread work... string status = GetUpdatedStatus(); Dispatcher.BeginInvoke(DispatcherPriority.Normal, new Action( () => { statusLabel.Text = status; })); // Continue on in background method .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This works fine, but forces your method to take a dependency on WPF or Windows Forms.  There is an alternative option, however.  Both Windows Forms and WPF, when initialized, setup a SynchronizationContext in their thread, which is available on the UI thread via the SynchronizationContext.Current property.  This context is used by classes such as BackgroundWorker to marshal calls back onto the UI thread in a framework-agnostic manner. The Task Parallel Library provides the same functionality via the TaskScheduler.FromCurrentSynchronizationContext() method.  When setting up our Tasks, as long as we’re working on the UI thread, we can construct a TaskScheduler via: TaskScheduler uiScheduler = TaskScheduler.FromCurrentSynchronizationContext(); We then can use this scheduler on any thread to marshal data back onto the UI thread.  For example, our code above can then be rewritten as: string status = GetUpdatedStatus(); (new Task(() => { statusLabel.Text = status; })) .Start(uiScheduler); // Continue on in background method This is nice since it allows us to write code that isn’t tied to Windows Forms or WPF, but is still fully functional with those technologies.  I’ll discuss even more uses for the SynchronizationContext based TaskScheduler when I demonstrate task continuations, but even without continuations, this is a very useful construct. In addition to the two implementations provided by the Task Parallel Library, it is possible to implement your own TaskScheduler.  The ParallelExtensionsExtras project within the Samples for Parallel Programming provides nine sample TaskScheduler implementations.  These include schedulers which restrict the maximum number of concurrent tasks, run tasks on a single threaded apartment thread, use a new thread per task, and more.

  Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >