Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 218/792 | < Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >

  • Cisco ASA Hairpinning with Dynamic IP

    - by Joseph Sturtevant
    I currently have my Cisco ASA 5505 firewall configured to forward port 80 from the outside interface to a host on my dmz interface. I also need to allow clients on my inside interface to access the host in the dmz by entering the public ip / dns record in their browsers. I was able to do that by following the instructions here, resulting in the following configuration: static (dmz,outside) tcp interface www 192.168.1.5 www netmask 255.255.255.255 static (dmz,inside) tcp 74.125.45.100 www 192.168.1.5 www netmask 255.255.255.255 (Where 74.125.45.100 is my public IP and 192.168.1.5 is the IP of the dmz host) This works great except for the fact that my network has a dynamic public IP and this configuration will therefore break as soon as my public IP changes. Is there a way to do what I want with a dynamic ip? Note: Adding an internal DNS record won't solve my problem since I have multiple dmz hosts mapped to different ports on the public IP.

    Read the article

  • Subversion error: Repository moved permanently to please relocate

    - by Bart S.
    I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> Options +indexes DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this?

    Read the article

  • Installing Xen 4.0.1 from Source on Ubuntu 10.10

    - by markus
    I'm trying to install Xen 4.0.1 from Source on Ubuntu 10.10 Server Edition. I started with a clean machine and followed the instructions from https://help.ubuntu.com/community/Xen. So I installed the packages mentioned there with: sudo apt-get install gettext bin86 bcc libc6-dev-i386 iasl texinfo git When making the source with make world I get this error: + git clone -o xen -n git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-pvops.git.tmp Initialized empty Git repository in /home/homer/xen/linux-2.6-pvops.git.tmp/.git/ remote: Counting objects: 1855434, done. remote: Compressing objects: 100% (291939/291939), done. Receiving objects: 100% (1855434/1855434), 368.49 MiB | 11.00 MiB/s, done. remote: Total 1855434 (delta 1553214), reused 1847760 (delta 1546656) Resolving deltas: 100% (1553214/1553214), done. + cd linux-2.6-pvops.git.tmp + git checkout -b xen/stable-2.6.32.x xen/xen/stable-2.6.32.x fatal: git checkout: branch xen/stable-2.6.32.x already exists make[3]: *** [linux-2.6-pvops.git/.valid-src] Error 128 Does anybody have an idea what i can do?

    Read the article

  • How to use X11 forwarding with putty

    - by Neuquino
    I have a VM with RHEL 5 without an X server. My host has Windows 7. I need to connect to the VM and redirect the X11 output of the commands to my host. I know that if my host were a GNU/Linux machine it would be as easy as ssh -X . I'm ussing PuTTy to connect by SSH to the VM, I tried enabling X11 forward option in PuTTy config, but nothing happened. Have you ever done this? I'm quite advanced with GNU/Linux, but a newbie with this toy of Winbug$ 7.

    Read the article

  • Varnish VCL Reload Fails After Adding Second Backend

    - by Andy
    I have been running Varnish on my production server successfully for several weeks now. Now I'm trying to configure Varnish to use a second backend for certain requests. My original working VCL (/etc/varnish/default.vcl) begins like this: backend default { .host = "127.0.0.1"; .port = "8080"; } ...rest of VCL... And I'm changing it to: backend default { .host = "127.0.0.1"; .port = "8080"; } backend backend2 { .host = "12.34.56.78"; .port = "80"; } ...rest of VCL... When I reload the VCL file, I get the following: Command failed with error code 106 Failed to reload /etc/varnish/default.vcl. Any idea what the error could be, or how I can get more information on the problem?

    Read the article

  • Disable Windows Key Hotkeys when using Virtualbox

    - by statenjason
    I'm currently running a VirtualBox of Arch Linux with Windows 7 x64 as the host. In Arch, I use dwm for window management. As dwm is heavily dependent on hotkeys, I've used the ALT key as its META key to prevent conflict with the Windows 7 host. However, when using emacs (also heavy hotkey usage) within dwm, there are issues because it's also using ALT for its own META. I'd like to change either dwm or emacs to use the windows key as META, but commands such as Win+L will be captured by the host machine and lock my system. Is there any way to prevent these hotkeys from being triggered while within VirtualBox?

    Read the article

  • Unable to set nginx to serve my staging website

    - by user100778
    I'm having some troubles setting up nginx to serve my staging website. What I did is change the server_name but for some reasons it just doesn't work. The url scheme is "domain.foo" is production, "staging.domain.foo" is staging, "foobar.domain.foo" is a web service, "foobar.staging.domain.foo" is the staging version of the same webserver, ".domain.foo" is routed to serve some s3 static HTML, ".staging.domain.foo" is routed to serve some s3 static HTML in another bucket. All production urls work and are correctly configured, all staging urls doesn't work. Here is my conf file. You will see some duplication, I will gladly accept any correction/optimization, I'm a coder and configuring servers is definitely not my thing (but I'm eager to learn and improve...). server { listen 80; ## listen for ipv4 server_name "domain.foo" "www.domain.foo" default_server; access_log /var/log/nginx/access.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; location ~* \.(jpg|jpeg|gif|png|ico|css|bmp|js|html)$ { access_log off; expires max; root /home/foo/Foo/current/public; break; } if ($host ~ 'www.domain.foo') { rewrite ^/(.*)$ http://domain/foo/$1 permanent; } proxy_pass http://production; break; } } server { listen 80; server_name "staging.domain.foo"; access_log /var/log/nginx/access.staging.log; error_log /var/log/nginx/error.staging.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://staging; break; } } server { listen 80; ## listen for ipv4 server_name "foobar.domain.foo"; access_log /var/log/nginx/access.log; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if ($host = 'foobar.domain.foo') { proxy_pass http://foobar; break; } } } server { listen 80; ## listen for ipv4 server_name foobar.staging.domain.foo; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://foobar_staging; break; } } server { listen 80; server_name "~^(.+)\.domain\.foo$"; location / { proxy_intercept_errors on; error_page 404 = http://domain.foo/404; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.domain.foo.s3.amazonaws.com; } } server { listen 80; server_name "~^(.+)\.staging\.domain\.foo$"; location / { proxy_intercept_errors on; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.staging.domain.foo.s3.amazonaws.com; } } upstream production { server 111.255.111.110:8000; server 111.255.111.110:8001; server 111.255.111.110:8002; server 111.255.111.110:8003; } upstream staging { server 222.255.222.222:8000; server 222.255.222.222:8001; } upstream foobar { server 111.255.222.165:9000; server 111.255.222.165:9001; server 111.255.222.165:9002; } upstream foobar_staging { server 222.255.222.222:9000; } What happens now when I point my browser to staging.domain.foo is that it hangs. Can't find anything in the logs, but for example the access.staging.log and errors.staging.log are created. Anybody has an idea? :)

    Read the article

  • IPv6 address is not working in Ubuntu

    - by Alex Farber
    Telnet connection with echo service succeeds for localhost and 127.0.0.1 host names, but fails with ::1 host name: alex@u120432:~$ telnet localhost 7 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 123 123 ^] telnet q Connection closed. alex@u120432:~$ telnet ::1 7 Trying ::1... telnet: Unable to connect to remote host: Connection refused alex@u120432:~$ My own program trying to talk using IPv6 address fails as well. Why IPv6 address is rejected? OS: Ubuntu 12.04 32 bit.

    Read the article

  • TeamViewer cannot connect

    - by Cetin Sert
    Last week I decided to use TeamViewer VPN to administer software on a server behind a firewall using RemoteDesktop. It was easy to configure to start-up with the system and make VPN available on the other side but now it fails to connect at the step shown below: The remote machine is running Windows Server 2008 R2. Is there a native way to circumvent the external firewall using a server role or feature to make Windows Server do the VPN work? Do people have better / more reliable experiences with other products such as Hamachi? The requirements are as follows: Start at remote system start-up time Make VPN connections to the remote machine possible

    Read the article

  • Can't resolve localhost on Mac OS X Server

    - by iainbeeston
    I have a server running OS X Server 10.5 and it can't resolve localhost to 127.0.0.1. When I try ping this is what happens: ping localhost ping: cannot resolve localhost: Unknown host SSH and web browsers get similar results (uknown host). If I try using 127.0.0.1 or the ip address assigned on the LAN all of the above work. Here's the contents of my /etc/hosts file: cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I have no local DNS service running. Does anyone have any idea why this might be happening or how I can fix it?

    Read the article

  • RRAS VPN Server on Windows 2008 Behind NAT

    - by Chris
    Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

    Read the article

  • Using apache reverse proxy for Domino inotes 8.5

    - by Haider
    I have setup access for the users to their mailfiles on Domino 8.5.1 using Inotes. The reverse proxy in use is Apache. It works fine. This is the current configuration i am using. Virtual host is commented out. The user types e.f.g.h and is being pointed to a.b.c.d and this works correctly without using virtual host. How would i implement this using Virtual Host # <VirtualHost ServerName ??? ProxyRequests off ProxyPass / `http://a.b.c.d/ ProxyPassReverse / `http://a.b.c.d/ ProxyPreserveHost On <Location / ProxyHTMLEnable On ProxyHTMLURLMap / / RequestHeader unset Accept-Encoding </Location </VirtualHost

    Read the article

  • Hyper-V VMs hanging 10 minutes after startup

    - by Ken George
    Hyper-V running under a fresh install of 2008 R2 DC 2 VMs both running 2008 R2 STD One VM has SQL 2008 Server w/ SP2 and Office 2007 Enterprise w/ SP2 Othe VMS only Office 2007 w/ SP2. Approximately 10 minutes after reboot the Hyuper-V host the VMs will hang Hang = answers pings, but no RDP connections and Hyper-V console session is non responsive Disabled Hyper-V and had no proble with 2008 R2 DC host. Started the three Hyper-V services and 10 minutes later was hung again. Hardware is HP DL380 G4 2 socket, 48 GB, Internal SAS controller 1.5TB C drive VMs .VHDs are on external SAS controller on a 1.5 TB RAID5 volume. Nothing in event log on either VMs or Hyper-V host. Ken

    Read the article

  • Virtual Box Pen Test Lab Set Up

    - by hairyjewbear
    So i'm trying to set up a pen test lab in virtual box on my windows 7 host. I have 3 guest OS's installed: 1.) BackTrack5 2.) Centos 5 Server/Snort (My Snortbox) 3.) Win XP (Unpatched) I have 3 Ethernet adapters created IP'S 192.168.191.1 192.168.127.1 192.168.56.1 My goal is to use BackTrack5 to nmap the Win XP guest and have the snort box sniff the network. I'm new to networking and virtualization and I need help setting up my virtual network to get this to work. What should I do? All help appreciated Centos: Adapter1: NAT Adapter2: Host-only Adapter3: Internal Network Backtrack: Adapter1: Internal Network XP: Adapter1: Internal Network Also take for granted I'm on a University Network with a ridiculous firewall so I need to stay all within the host

    Read the article

  • How can I connect JConsole to WebLogic using the WL SSL Listen Port

    - by Mircea Vutcovici
    I would like to be able to use JConsole on remote WebLogic servers via the multiplexer port on SSL. Is it possible this without doing any configuration changes WebLogic? Only by adding some jars (e.g. wljmxclient.jar) or parameters to JConsole. I've tried with variations of the following command without success: $JAVA_HOME/bin/jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:\ $JAVA_HOME/lib/tools.jar:$WL_HOME/server/lib/wljmxclient.jar \ -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote -debug \ service:jmx:rmi:///jndi/iiop://server_name:7441/jmxrmi I think that one of the problem is that the SSL is not enabled in JConsole.

    Read the article

  • Stop Zabbix notification for nodes under zabbix-proxy when proxy service is down

    - by A_01
    I have a zabbix-proxy and 12 nodes in that proxy. Right now whenever proxy service goes down. It send out of reach mail for all the 12 nodes. I want to send mail only for the zabbix proxy not for the nodes under that proxy Updated: Now I am trying to have a single trigger in which I want to check both the conditions like 1-check zabbix-host is not accessble from past x minutes. 2-check the host is not giving any data to the proxy(Host is down). Not the trigger should start shouting onle when we have condition in which proxy is running and node is down. I tried the below but its not working for me. Can some please help me out in this ({ip-10-4-1-17.ec2.internal:agent.ping.nodata(2m)}=1) & ({ip-10-4-1- 17.ec2.internal:zabbix[proxy,zabbixproxy.dev-test.com,lastaccess].fu??zzytime(120)}=1)

    Read the article

  • Virtualbox two networks slow

    - by Petr Marek
    I am running an Ubuntu server guest on Win 7 guest, and am running a webrick server (RoR dev). If I have just a host-only network, everything works fine and the browser response is instant. However, if I add a second network (NAT), so that the server can connect to the internet (for various updates etc.), the host-to-guest access gets really slow. I can't use the bridge connection. I am using the port 3000 (RoR Webrick server) and connecting to the guest via internet browser on this port (eg http://192.168.56.102:3000). Any idea, what could be causing this? If I ping the IP from host console, I get < 0ms. Here are the settings (relevant info is in english; Povoleno vše is Everything is allowed):

    Read the article

  • Welcome files are not loaded! Need help with Railo, mappings and J2EE configuration!

    - by mrt181
    I have installed a J2EE Server (tried it with Glassfish3, Tomcat6 and Resin4) on Win7 64bit and deployed Railo3.1. I have then added a virtual host to the J2EE server, i.e. Resin: <host host-name="railo"> C:/resin/webapps/railo In the Railo Admin i have added this mapping: Virtual Physical / C:/webapps/ When i access http://railo:8080/ my index.cfm welcome file in C:/webapps/ is loaded (index.cfm is definded in Railos web.xml). When i try to access http://railo:8080/test which contains the same index.cfm i get an 500 Servlet Exception java.io.FileNotFoundException: C:\webapps\test (access denied) (on all J2EE Servers i tried so far). http://railo:8080/test/index.cfm works fine. I already tried to add index.cfm to Resins welcome-file-list in app-default.xml to no avail. I want to be able to access deployed apps without this url: http://localhost:8080/app/ Instead i want to use this: http://app:8080/

    Read the article

  • Cisco Catalyst 65XX and traffic shaping

    - by Nadz Goldman
    Hello! I have Cisco Catalyst 65XX, many VLANs and about ~1300 users. Users connected to some D-Link switches with second-level management. D-Link switches come to my Cisco Catalyst 65XX by VLANs. So, how I can shape traffic per user? If I use something like this: access-list 145 permit ip any host 192.168.0.1 access-list 145 permit ip any host 192.168.0.2 access-list 145 permit ip any host 192.168.0.3 ... int Gi0/1 traffic-shape group 145 128000 7936 7936 1000 will I have shape traffic per user or it will shape traffic only on interface? I mean - every user will have 128kb/s (per user) or everybody will have 128kb/s ? If it will be for everybody, then what is the solution of my question: how every user can have 128kb/s ?

    Read the article

  • rsync set group owner, group permission

    - by ChrisInEdmonton
    I want to use rsync to transfer files from my computer to a remote Linux system. Regardless of the local file's group ownership, I want to set these values on the remote side. If I was on the remote Linux system, I could create the directory and set the ownership and permissions as: mkdir my_directory chown :my_group my_directory chmod 775 my_directory If I create the directory locally and then use rsync (remember, I don't have my_group locally), I do: rsync -ae ssh --chmod=ug+rw,Dug+rwx my_directory remoteserver:dest That works, but I cannot figure out how to set the group owner through rsync. If I do a chmod g+s dest, my_directory has the correct group owner but all of the files inside have the incorrect group owner.

    Read the article

  • Migrating Shared Hosting and Email

    - by Chrisc
    Hey Guys, I know there has already been a question that has been posted here about migrating shared hosting accounts, but wanted to get a second opinion on my plan to move hosting providers. My business is moving our shared hosting account (hosting and email) to a new provider, and would like to have minimal downtime. Here is our current plan: Create a backup of our old site Upload our site to the new host Set up duplicate email accounts with our new host Change the name server records on our domain to point to our new host Leave our old site up long enough for DNS records to propagate completely. I'm hoping this should result in little downtime for both website and email. Because of the volume of high-importance emails our company receives on a daily basis downtime is very expensive and not tolerated. Thanks, Chris

    Read the article

  • Running multiple services on Port 443, Tunnel SSH over HTTPS

    - by lajuette
    Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

    Read the article

  • Issue varnish purge through CloudFlare to Varnish

    - by Michael
    I've been working on this for a while and can't seem to find any solution. I have varnish sitting in front of my nginx server, with CloudFlare sitting in front. When I issue a curl -X PURGE host CloudFlare picks it up and of course denies it with a 503 error. If I use direct.host to bypass CloudFlare it hits the Varnish server and it accepts the request but it does nothing since direct.host isn't used so there is nothing in the cache for that url. I am using WordPress and there is a WordPress Varnish Purge plugin, it says to add the following line to wp-config.php: define('VHP_VARNISH_IP','127.0.0.1') This is specifically to work with proxy servers and/or CloudFlare to make sure the request goes to the Varnish server rather than CloudFlare, but that doesn't seem to help. Anyone see this before and have any idea?

    Read the article

  • How to enable connection security for WMI firewall rules when using VAMT 2.0?

    - by Ondrej Tucny
    I want to use VAMT 2.0 to install product keys and active software in remote machines. Everything works fine as long as the ASync-In, DCOM-In, and WMI-In Windows Firewall rules are enabled and the action is set to Allow the connection. However, when I try using Allow the connection if it is secure (regardless of the connection security option chosen) VAMT won't connect to the remote machine. I tried using wbemtest and the error always is “The RPC server is unavailable”, error code 0x800706ba. How do I setup at least some level of connection security for remote WMI access for VAMT to work? I googled for correct VAMT setup, read the Volume Activation 2.0 Step-by-Step guide, but no luck finding anything about connection security.

    Read the article

  • Can't resolve localhost on Mac OS X Server

    - by iainbeeston
    I have a server running OS X Server 10.5 and it can't resolve localhost to 127.0.0.1. When I try ping this is what happens: ping localhost ping: cannot resolve localhost: Unknown host SSH and web browsers get similar results (uknown host). If I try using 127.0.0.1 or the ip address assigned on the LAN all of the above work. Here's the contents of my /etc/hosts file: cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I have no local DNS service running. Does anyone have any idea why this might be happening or how I can fix it?

    Read the article

< Previous Page | 214 215 216 217 218 219 220 221 222 223 224 225  | Next Page >