Search Results

Search found 6987 results on 280 pages for 'examples'.

Page 219/280 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

  • When to choose which machine learning classifier?

    - by LM
    Suppose I'm working on some classification problem. (Fraud detection and comment spam are two problems I'm working on right now, but I'm curious about any classification task in general.) How do I know which classifier I should use? (Decision tree, SVM, Bayesian, logistic regression, etc.) In which cases is one of them the "natural" first choice, and what are the principles for choosing that one? Examples of the type of answers I'm looking for (from Manning et al.'s "Introduction to Information Retrieval book": http://nlp.stanford.edu/IR-book/html/htmledition/choosing-what-kind-of-classifier-to-use-1.html): a. If your data is labeled, but you only have a limited amount, you should use a classifier with high bias (for example, Naive Bayes). [I'm guessing this is because a higher-bias classifier will have lower variance, which is good because of the small amount of data.] b. If you have a ton of data, then the classifier doesn't really matter so much, so you should probably just choose a classifier with good scalability. What are other guidelines? Even answers like "if you'll have to explain your model to some upper management person, then maybe you should use a decision tree, since the decision rules are fairly transparent" are good. I care less about implementation/library issues, though. Also, for a somewhat separate question, besides standard Bayesian classifiers, are there 'standard state-of-the-art' methods for comment spam detection (as opposed to email spam)? [Not sure if stackoverflow is the best place to ask this question, since it's more machine learning than actual programming -- if not, any suggestions for where else?]

    Read the article

  • retrieving object information with Doctrine

    - by ajsie
    i want to fetch information from the database using objects. i really like this approach cause this is more OOP: $user = Doctrine_Core::getTable('User')->find(1); echo $user->Email['address']; echo $user->Phonenumbers[0]->phonenumber; rather than: $q = Doctrine_Query::create() ->from('User u') ->leftJoin('u.Email e') ->leftJoin('u.Phonenumbers p') ->where('u.id = ?', 1); $user = $q->fetchOne(); echo $user->Email['address']; echo $user->Phonenumbers[0]['phonenumber']; the problem is that the first one uses 3 queries (3 different tables), while the second one uses only 1 (and is therefore recommended technique). but i feel that it destroys the object oriented design. cause ORM is meant to give us an OOP approach so that we could focus on objects and not the relational database. but now they want us to go back to use SQL like pattern. there isn't a way to get information form multiple tables not using DQL? the above examples are taken from the documentation: doctrine

    Read the article

  • Warshall Algorithm Logic - Stuck

    - by stan
    I am trying to use this logic to understand what is going on with the adjacency matrix, but i am massivley confused where it says about interspacing for a b c d ..... Could anyone explain what is going on here? Thank you (tagged as java as its the language this was demonstarted to us in, so if anyone posted any code examples they could see it was in that language) http://compprog.wordpress.com/2007/11/15/all-sources-shortest-path-the-floyd-warshall-algorithm/ Here is the code: for (k = 0; k < n; ++k) { for (i = 0; i < n; ++i) for (j = 0; j < n; ++j) /* If i and j are different nodes and if the paths between i and k and between k and j exist, do */ if ((dist[i][k] * dist[k][j] != 0) && (i != j)) /* See if you can't get a shorter path between i and j by interspacing k somewhere along the current path */ if ((dist[i][k] + dist[k][j] < dist[i][j]) || (dist[i][j] == 0)) dist[i][j] = dist[i][k] + dist[k][j];

    Read the article

  • CSS Multiple multi-column divs

    - by accelerate
    I have a bunch of items (text, image, mixed content, etc) that I want to display. The user can define what row and what column that item appears in. For example, in row 1, there could be two items/columns, both images. In row two, there could be three items / columns, one with an image, two others as pure text. Oh, and the user may specify the width of any particular column/image/item. I have a solution that uses multiple tables that works. In essence, each row is a new table. This works for the most part. I'm wondering if I can use just divs? Now my CSS foo is lacking, and I tried to copy examples from the web, and I haven't been able to get it working. Right now I have something like this: `[for each row] [for each column] [content] ` But everything is overlapping each other. I've also tried using "position: relative", but things look even more borked. So can divs actually be used for multiple rows and different number of columns?

    Read the article

  • complex web forms and javascript

    - by Casey
    I need to create a few data heavy complicated forms. Currently, the information is being entered into a spread sheet, but the users will need to enter the information into the online form where it will be saved to a database. The problem is that the business users currently using the spread sheet aren't going to want to use the online application if it isn't as easy as entering the information into the spread sheet. This is further complicated in that the information they are entering into the spread sheet is represented by three different DB tables where one "object" is composed of two of the others. I would prefer to not have them have to go through multiple forms. Some of what I have been thinking is: Use of auto complete where possible Hiding/removing form fields dynamically possible wizard style page flow?? I've been googling for other data heavy web forms but can't seem to really find any good examples. I am familiar with jQuery and prototypejs and have also tried googling for frameworks designed for data heavy applications but didn't come up with anything. Any thoughts? Thanks.

    Read the article

  • Accessing running task scheduled with java.util.Timer

    - by jbatista
    I'm working on a Java project where I have created a class that looks like this (abridged version): public class Daemon { private static Timer[] timerarray=null; private static Daemon instance=null; protected Daemon() { ArrayList<Timer> timers = new ArrayList<Timer>(); Timer t = new Timer("My application"); t.schedule(new Worker(), 10000,30000); timers.add(t); //... timerarray = timers.toArray(new Timer[]{}); } public static Daemon getInstance() { if(instance==null) instance=new Daemon(); return instance; } public SomeClass getSomeValueFromWorker() { return theValue; } ///////////////////////////////////////////// private class Worker extends TimerTask { public Worker() {} public void run() { // do some work } public SomeReturnClass someMethod(SomeType someParameter) { // return something; } } ///////////////////////////////////////////// } I start this class, e.g. by invoking daemon.getInstance();. However, I'd like to have some way to access the running task objects' methods (for example, for monitoring the objects' state). The Java class java.util.Timer does not seem to provide the means to access the running object, it just schedules the object instance extending TimerTask. Are there ways to access the "running" object instanciated within a Timer? Do I have to subclass the Timer class with the appropriate methods to somehow access the instance (this "feels" strange, somehow)? I suppose someone might have done this before ... where can I find examples of this "procedure"? Thank you in advance for your feedback.

    Read the article

  • XML-RPC over SSL with Ruby: end of file reached (EOFError)

    - by Michael Conigliaro
    Hello, I have some very simple Ruby code that is attempting to do XML-RPC over SSL: require 'xmlrpc/client' require 'pp' server = XMLRPC::Client.new2("https://%s:%d/" % [ 'api.ultradns.net', 8755 ]) pp server.call2('UDNS_OpenConnection', 'sponsor', 'username', 'password') The problem is that it always results in the following EOFError exception: /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/net/protocol.rb:135:in `sysread': end of file reached (EOFError) So it appears that after doing the POST, I don't get anything back. Interestingly, this is the behavior I would expect if I tried to make an HTTP connection on the HTTPS port (or visa versa), and I actually do get the same exact exception if I change the protocol. Everything I've looked at indicates that using "https://" in the URL is enough to enable SSL, but I'm starting wonder if I've missed something. Note that Even though the credentials I'm using in the RPC are made up, I'm expecting to at least get back an XML error page (similar to if you access https://api.ultradns.net:8755/ with a web browser). I've tried running this code on OSX and Linux with the exact same result, so I have to conclude that I'm just doing something wrong here. Does anyone have any examples of doing XML-RPC over SSL with Ruby?

    Read the article

  • Theory: "Lexical Encoding"

    - by _ande_turner_
    I am using the term "Lexical Encoding" for my lack of a better one. A Word is arguably the fundamental unit of communication as opposed to a Letter. Unicode tries to assign a numeric value to each Letter of all known Alphabets. What is a Letter to one language, is a Glyph to another. Unicode 5.1 assigns more than 100,000 values to these Glyphs currently. Out of the approximately 180,000 Words being used in Modern English, it is said that with a vocabulary of about 2,000 Words, you should be able to converse in general terms. A "Lexical Encoding" would encode each Word not each Letter, and encapsulate them within a Sentence. // An simplified example of a "Lexical Encoding" String sentence = "How are you today?"; int[] sentence = { 93, 22, 14, 330, QUERY }; In this example each Token in the String was encoded as an Integer. The Encoding Scheme here simply assigned an int value based on generalised statistical ranking of word usage, and assigned a constant to the question mark. Ultimately, a Word has both a Spelling & Meaning though. Any "Lexical Encoding" would preserve the meaning and intent of the Sentence as a whole, and not be language specific. An English sentence would be encoded into "...language-neutral atomic elements of meaning ..." which could then be reconstituted into any language with a structured Syntactic Form and Grammatical Structure. What are other examples of "Lexical Encoding" techniques? If you were interested in where the word-usage statistics come from : http://www.wordcount.org

    Read the article

  • How do you pass a BitmapImage from a background thread to the UI thread in WPF?

    - by DanM
    I have a background thread that generates a series of BitmapImage objects. Each time the background thread finishes generating a bitmap, I would like to show this bitmap to the user. The problem is figuring out how to pass the BitmapImage from the background thread to the UI thread. This is an MVVM project, so my view has an Image element: <Image Source="{Binding GeneratedImage}" /> My view-model has a property GeneratedImage: private BitmapImage _generatedImage; public BitmapImage GeneratedImage { get { return _generatedImage; } set { if (value == _generatedImage) return; _generatedImage= value; RaisePropertyChanged("GeneratedImage"); } } My view-model also has the code that creates the background thread: public void InitiateGenerateImages(List<Coordinate> coordinates) { ThreadStart generatorThreadStarter = delegate { GenerateImages(coordinates); }; var generatorThread = new Thread(generatorThreadStarter); generatorThread.ApartmentState = ApartmentState.STA; generatorThread.IsBackground = true; generatorThread.Start(); } private void GenerateImages(List<Coordinate> coordinates) { foreach (var coordinate in coordinates) { var backgroundThreadImage = GenerateImage(coordinate); // I'm stuck here...how do I pass this to the UI thread? } } I'd like to somehow pass backgroundThreadImage to the UI thread, where it will become uiThreadImage, then set GeneratedImage = uiThreadImage so the view can update. I've looked at some examples dealing with the WPF Dispatcher, but I can't seem to come up with an example that addresses this issue. Please advise.

    Read the article

  • Private Java class properties mysteriously reset between method calls....

    - by Michael Jones
    I have a very odd problem. A class property is mysteriously reset between method calls. The following code is executed so the constructor is called, then the parseConfiguration method is called. Finally, processData is called. The parseConfiguration method sets the "recursive" property to "true". However, as soon as it enters "processData", "recursive" becomes "false". This problem isn't isolated to a single class -- I have several examples of this in my code. How can this possibly be happening? I've tried initialising properties when they're declared outside any methods, I've tried initialising them in constructors... nothing works. The only complication I can think of here is that this class is invoked by an object that runs in a thread -- but here is one instance per thread, so surely no chance that threads are interfering. I've tried setting both methods to "synchronized", but this still happens. Please help! /** * This class or its superclasses are NOT threaded and don't extend Thread */ public class DirectoryAcquirer extends Manipulator { /** * @var Whether to recursively scan directories */ private boolean recursive = false; /** * Constructor */ public DirectoryAcquirer() { } /** * Constructor that initialises the configuration * * @param config * @throws InvalidConfigurationException */ public DirectoryAcquirer(HierarchicalConfiguration config) throws InvalidConfigurationException { super(config); } @Override protected void parseConfiguration() throws InvalidConfigurationException { // set whether to recurse into directories or not if (this.config.containsKey("recursive")) { // this.recursive gets set to "true" here this.recursive = this.config.getBoolean("recursive"); } } @Override public EntityCollection processData(EntityCollection data) { // here this.recursive is "false" this.logger.debug("processData: Entered method"); } }

    Read the article

  • Protected and Private methods

    - by cabaret
    I'm reading through Beginning Ruby and I'm stuck at the part about private and protected methods. This is a newbie question, I know. I searched through SO for a bit but I couldn't manage to find a clear and newbie-friendly explanation of the difference between private and protected methods. The book gives two examples, the first one for private methods: class Person def initialize(name) set_name(name) end def name @first_name + ' ' + @last_name end private def set_name(name) first_name, last_name = name.split(/\s+/) set_first_name(first_name) set_last_name(last_name) end def set_first_name(name) @first_name = name end def set_last_name(name) @last_name = name end end In this case, if I try p = Person.new("Fred Bloggs") p.set_last_name("Smith") It will tell me that I can't use the set_last_name method, because it's private. All good till there. However, in the other example, they define an age method as protected and when I do fred = Person.new(34) chris = Person.new(25) puts chris.age_difference_with(fred) puts chris.age It gives an error: :20: protected method 'age' called for #<Person:0x1e5f28 @age=25> (NoMethodError) I honestly fail to see the difference between the private and protected methods, it sounds the same to me. Could someone provide me with a clear explanation so I'll never get confused about this again? I'll provide the code for the second example if necessary.

    Read the article

  • Use XML Layout to contain a simple drawing

    - by user329999
    I would like to create a simple drawing (lines, circles, squares, etc...) but I'm having difficulty figuring out the best way to do this. The drawing would need to be scaled to fit the display since the size is indirectly specified by the user (like in a CAD application). Also, I don't want to take up the entire display, leaving room for some controls (buttons, etc). I would pass the data to describe the drawing. Here's how I imagine it would work. I create an XML layout that contains something that holds the drawing (ImageView, BitmapDrawable, ShapeDrawable, ...??? not sure exactly what). Then in my Activity I would load the main XML and obtain the resource for the control that holds the drawing. I would then draw to a bitmap. Once the bitmap was completed I would load it into the control that is to hold the drawing. Somewhere along this path it would be scaled to fill the entire area allocated for the drawing in the XML layout. I don't know if my approach is the way to do this or what classes to use. I read the http://developer.android.com/guide/topics/graphics/2d-graphics.html documentation, but it's not helping me with an example. The examples I do find leave me with hints, but nothing concrete enough to do what I want, especially when it comes to scaling, using XML and/or having other controls. Also, there seems to be no good documentation on the design of the 2D drawing system in a more conceptual manner, so it makes what I read difficult to put into any useful context. Any hints on what classes would be useful and/or a good example any other reading materials? Thanks

    Read the article

  • Calculate lookat vector from position and Euler angles

    - by Jaap
    I've implemented an FPS style camera, with the camera consisting of a position vector, and Euler angles pitch and yaw (x and y rotations). After setting up the projection matrix, I then translate to camera coordinates by rotating, then translating to the inverse of the camera position: // Load projection matrix glMatrixMode(GL_PROJECTION); glLoadIdentity(); // Set perspective gluPerspective(m_fFOV, m_fWidth/m_fHeight, m_fNear, m_fFar); // Load modelview matrix glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // Position camera glRotatef(m_fRotateX, 1.0, 0.0, 0.0); glRotatef(m_fRotateY, 0.0, 1.0, 0.0); glTranslatef(-m_vPosition.x, -m_vPosition.y, -m_vPosition.z); Now I've got a few viewports set up, each with its own camera, and from every camera I render the position of the other cameras (as a simple box). I'd like to also draw the view vector for these cameras, except I haven't a clue how to calculate the lookat vector from the position and Euler angles. I've tried to multiply the original camera vector (0, 0, -1) by a matrix representing the camera rotations then adding the camera position to the transformed vector, but that doesn't work at all (most probably because I'm way off base): vector v1(0, 0, -1); matrix m1 = matrix::IDENTITY; m1.rotate(m_fRotateX, 0, 0); m1.rotate(0, m_fRotateY, 0); vector v2 = v1 * m1; v2 = v2 + m_vPosition; // add camera position vector glBegin(GL_LINES); glVertex3fv(m_vPosition); glVertex3fv(v2); glEnd(); What I'd like is to draw a line segment from the camera towards the lookat direction. I've looked all over the place for examples of this, but can't seem to find anything. Thanks a lot!

    Read the article

  • Cant' cast a class with multiple inheritance

    - by Jay S.
    I am trying to refactor some code while leaving existing functionality in tact. I'm having trouble casting a pointer to an object into a base interface and then getting the derived class out later. The program uses a factory object to create instances of these objects in certain cases. Here are some examples of the classes I'm working with. // This is the one I'm working with now that is causing all the trouble. // Some, but not all methods in NewAbstract and OldAbstract overlap, so I // used virtual inheritance. class MyObject : virtual public NewAbstract, virtual public OldAbstract { ... } // This is what it looked like before class MyObject : public OldAbstract { ... } // This is an example of most other classes that use the base interface class NormalObject : public ISerializable // The two abstract classes. They inherit from the same object. class NewAbstract : public ISerializable { ... } class OldAbstract : public ISerializable { ... } // A factory object used to create instances of ISerializable objects. template<class T> class Factory { public: ... virtual ISerializable* createObject() const { return static_cast<ISerializable*>(new T()); // current factory code } ... } This question has good information on what the different types of casting do, but it's not helping me figure out this situation. Using static_cast and regular casting give me error C2594: 'static_cast': ambiguous conversions from 'MyObject *' to 'ISerializable *'. Using dynamic_cast causes createObject() to return NULL. The NormalObject style classes and the old version of MyObject work with the existing static_cast in the factory. Is there a way to make this cast work? It seems like it should be possible.

    Read the article

  • Mixing JSP/HTML any new features or suggestions

    - by Maglebolia
    Hi all, I have a Web-Application, which is mainly JSP (file extension) and is including some HTML. It seems to me that the "general" way is "old" and not always well red by some IDE like Eclipse: Is there no other way to include jsp expression with "<% ... %". There is no need for a framework to resolve this, since we only have like 60 pages. I run through examples and see that we can seperate the code with blockquotes "< script < /script ". I'm really wondering which is the better method for understanding and easier reading of the code. Any formatting, syntax coloring, plugin or new code style suggestions would help. Here an example <%} %> <%if(condition) { %> <tr> <td class="label"><%=method()%></td> <td class="text"><%=method()%></td> </tr> <%} %> <tr>

    Read the article

  • How do I send text to a UITextView?

    - by Lee
    I'm new to iphone development. I'm a VB programmer who is trying to convert a VB application to an ipad app. I need some help with sending text to a UITextView. I want to first have a UIPickerView and then once the user hits a UIButton, a UITextView appears and the text is then generated by my source code code, line by line. The code would constantly be concatenating strings to the text. It would sort of go like this-- 1) User makes selections with UIPickerView. 2) User then hits UIButton. 3) UIPickerView is replaced on the screen with a UITextView. 4) The code does stuff. 5) The code adds the 1st line of text into the UITextView. 6) The code does more stuff. 7) The code then adds the 2nd line of text into the UITextView, retaining the 1st line that was already there. Steps 6 and 7 are repeated until the code is done. Does anyone know of any examples of this that I could look at? I am mostly interested in finding something like a youtube video, a webpage that explains the code or even a good book that covers this particular topic. I am finding that the sample codes that Apple has on this site goes over my head. In fact, I could probably benefit from a good book. But, I am looking for one that I would already know covers this particular topic, since it is so essential to the app that I am trying to build.

    Read the article

  • Put together tiles in android sdk and use as background

    - by Jon
    In a feeble attempt to learn some Android development am I stuck at graphics. My aim here is pretty simple: Take n small images and build a random image, larger than the screen with possibility to scroll around. Have an animated object move around on it I have looked at the SDK examples, Lunar Lander especially but there are a few things I utterly fail to wrap my head around. I've got a birds view plan (which in my head seems reasonably sane): How do I merge the tiles into one large image? The background is static so I figure I should do like this: Make a 2d array with refs to the tiles Make a large Drawable and draw the tiles on it At init draw this big image as the background At each onDraw redraw the background of the previous spot of the moving object, and the moving object at its new location The problem is the hands on things. I load the small images with "Bitmap img1 = BitmapFactory.decodeResource (res, R.drawable.img1)", but then what? Should I make a canvas and draw the images on it with "canvas.drawBitmap (img1, x, y, null);"? If so how to get a Drawable/Bitmap from that? I'm totally lost here, and would really appreciate some hands on help (I would of course be grateful for general hints as well, but I'm primarily trying to understand the Graphics objects). To make you, dear reader, see my level of confusion will I add my last desperate try: Drawable drawable; Canvas canvas = new Canvas (); Bitmap img1 = BitmapFactory.decodeResource (res, R.drawable.img1); // 50 x 100 px image Bitmap img2 = BitmapFactory.decodeResource (res, R.drawable.img2); // 50 x 100 px image canvas.drawBitmap (img1, 0, 0, null); canvas.drawBitmap (img2, 50, 0, null); drawable.draw (canvas); // obviously wrong as draw == null this.setBackground (drawable); Thanks in advance

    Read the article

  • Apply a Quartz filter while saving PDF under Mac OS X 10.6.3

    - by olpa
    Using Mac OS X API, I'm trying to save a PDF file with a Quartz filter applied, just like it is possible from the "Save As" dialog in the Preview application. So far I've written the following code (using Python and pyObjC, but it isn't important for me): -- filter-pdf.py: begin from Foundation import * from Quartz import * import objc page_rect = CGRectMake (0, 0, 612, 792) fdict = NSDictionary.dictionaryWithContentsOfFile_("/System/Library/Filters/Blue \ Tone.qfilter") in_pdf = CGPDFDocumentCreateWithProvider(CGDataProviderCreateWithFilename ("test .pdf")) url = CFURLCreateWithFileSystemPath(None, "test_out.pdf", kCFURLPOSIXPathStyle, False) c = CGPDFContextCreateWithURL(url, page_rect, fdict) np = CGPDFDocumentGetNumberOfPages(in_pdf) for ip in range (1, np+1): page = CGPDFDocumentGetPage(in_pdf, ip) r = CGPDFPageGetBoxRect(page, kCGPDFMediaBox) CGContextBeginPage(c, r) CGContextDrawPDFPage(c, page) CGContextEndPage(c) -- filter-pdf.py: end Unfortunalte, the filter "Blue Tone" isn't applied, the output PDF looks exactly as the input PDF. Question: what I missed? How to apply a filter? Well, the documentation doesn't promise that such way of creating and using "fdict" should cause that the filter is applied. But I just rewritten (as far as I can) sample code /Developer/Examples/Quartz/Python/filter-pdf.py, which was distributed with older versions of Mac (meanwhile, this code doesn't work too): ----- filter-pdf-old.py: begin from CoreGraphics import * import sys, os, math, getopt, string def usage (): print ''' usage: python filter-pdf.py FILTER INPUT-PDF OUTPUT-PDF Apply a ColorSync Filter to a PDF document. ''' def main (): page_rect = CGRectMake (0, 0, 612, 792) try: opts,args = getopt.getopt (sys.argv[1:], '', []) except getopt.GetoptError: usage () sys.exit (1) if len (args) != 3: usage () sys.exit (1) filter = CGContextFilterCreateDictionary (args[0]) if not filter: print 'Unable to create context filter' sys.exit (1) pdf = CGPDFDocumentCreateWithProvider (CGDataProviderCreateWithFilename (args[1])) if not pdf: print 'Unable to open input file' sys.exit (1) c = CGPDFContextCreateWithFilename (args[2], page_rect, filter) if not c: print 'Unable to create output context' sys.exit (1) for p in range (1, pdf.getNumberOfPages () + 1): #r = pdf.getMediaBox (p) r = pdf.getPage(p).getBoxRect(p) c.beginPage (r) c.drawPDFDocument (r, pdf, p) c.endPage () c.finish () if __name__ == '__main__': main () ----- filter-pdf-old.py: end

    Read the article

  • Did anyone have this issue with a simple Facebook app or know how to solve it?

    - by Jian Lin
    I have a really simple few lines of Facebook app, using the new Facebook API: <pre> <?php require 'facebook.php'; // Create our Application instance. $facebook = new Facebook(array( 'appId' => '117676584930569', 'secret' => '**********', // hidden here on the post... 'cookie' => true, )); var_dump($facebook); ?> but it is giving me the following output: http://apps.facebook.com/woolaladev/i2.php would give out object(Facebook)#1 (6) { ["appId:protected"]=> string(15) "117676584930569" ["apiSecret:protected"]=> string(32) "**********" <--- just hidden on this post ["session:protected"]=> NULL ["sessionLoaded:protected"]=> bool(false) ["cookieSupport:protected"]=> bool(true) ["baseDomain:protected"]=> string(0) "" } Session is NULL for some reason, but I am logged in and can access my home and profile and run other apps on Facebook (to see that I am logged on). I am following the sample on: http://github.com/facebook/php-sdk/blob/master/examples/example.php http://github.com/facebook/php-sdk/blob/master/src/facebook.php (download using raw URL: wget http://github.com/facebook/php-sdk/raw/master/src/facebook.php ) Trying on both hosting companies at dreamhost.com and netfirms.com, and the results are the same.

    Read the article

  • Django Database design -- Is this a good stragety for overriding defaults

    - by rh0dium
    Hi SO's I have a question on good database design practices and I would like to leverage you guys for pointers. The project started out simple. Hey we have a bunch of questions we want answered for every project (no problem) Which turned into... Hey we have so many questions can we group them into sections (yup we can do that) Which lead into.. Can we weight these questions and I don't really want some of these questions for my project (Yes but we are getting difficult) And then I'm thinking they will want to have each section have it's own weight.. Requirements So there's the requirements - For n number of project Allow a admin member the ability select the questions for a project Allow the admin member to re-weigh or use the default weights for the questions Allow the admin member to re-weight the sections Allow team members to answer the questions. So here is what I came up with. Please feel free to comment and provide better examples models.py from django.db import models from django.contrib.sites.models import Site from django.conf import settings class Section(models.Model): """ This describes the various sections for a checklist: """ name = models.CharField(max_length=64) description = models.TextField() class Question(models.Model): """ This simply provides a simple way to list out the questions. """ question = models.CharField(max_length=255) answer_type = models.CharField(max_length=16) description = models.TextField() section = models.ForeignKey(Section) class ProjectQuestion(models.Model): """ These are the questions relevant to the project """ question = models.ForeignKey(Question) answer = models.CharField(max_length=255) required = models.BooleanField(default=True) weight = models.FloatField(default = XXX) class Project(models.Model): """ Here is where we want to gather our questions """ questions = models.ManyToManyField(ProjectQuestion) Immediate questions: - When I start a project - any ideas on how to "pre-populate" the questions (and ultimately the weights) for the project? - Is there a generally accepted method for doing this process that I am missing? Basically the idea that you refer to the questions overide your own default weight, and store the answer? - It appears that a good chuck of the work will be done in the views and that a lot of checking will need to occur there? Is that OK? Again - feel free to give me better strategies!! Thanks

    Read the article

  • Can anyone give me tips how to solve this using Graphs in C or Java?

    - by peiska
    Can anyone give me tips how to solve this using Graphs in C or Java? I have a rectangular sector, that I have to escape, and I have energy that goes disappear every step that i give in the area. I have to give the only one possible solution, the one that uses the least number of steps. If there are at least two sectors with the same number of steps (X1, Y1) and (X2, Y2) then choose the first if X1 < X2 or if X1 = X2 and Y1 < Y2. the position( 1,1) corresponds to the upper left corner. Examples: This is one sector,and i start with 40 of energy and in the position (3,3) 12 11 12 11 3 12 12 12 11 11 12 2 1 13 11 11 12 2 13 2 14 10 11 13 3 2 1 12 10 11 13 13 11 12 13 12 12 11 13 11 13 12 13 12 12 11 11 11 11 13 13 10 10 13 11 12 the best solution to exit the sector is the position (5, 1) the remain energy is 12 and i need 8 steeps to leave the area. for this sector i start with 8 of energy and in the position (3,4). 4 3 3 2 2 3 2 2 5 2 2 2 3 3 2 1 2 2 3 2 2 4 3 3 2 2 4 1 3 1 4 3 2 3 1 2 2 3 3 0 3 4 And for this one there is no way out, cause it looses all the energy.

    Read the article

  • Improving field get and set performance with ASM

    - by ng
    I would like to avoid reflection in an open source project I am developing. Here I have classes like the following. public class PurchaseOrder { @Property private Customer customer; @Property private String name; } I scan for the @Property annotation to determine what I can set and get from the PurchaseOrder reflectively. There are many such classes all using java.lang.reflect.Field.get() and java.lang.reflect.Field.set(). Ideally I would like to generate for each property an invoker like the following. public interface PropertyAccessor<S, V> { public void set(S source, V value); public V get(S source); } Now when I scan the class I can create a static inner class of PurchaseOrder like so. static class customer_Field implements PropertyAccessor<PurchaseOrder, Customer> { public void set(PurchaseOrder order, Customer customer) { order.customer = customer; } public Customer get(PurchaseOrder order) { return order.customer; } } With these I totally avoid the cost of reflection. I can now set and get from my instances with native performance. Can anyone tell me how I would do this. A code example would be great. I have searched the net for a good example but can find nothing like this. The ASM examples are pretty poor also. The key here is that I have an interface that I can pass around. So I can have various implementations, perhaps one with Java Reflection as a default, one with ASM, and maybe one with Javassist? Any help would be greatly appreciated.

    Read the article

  • Join two tables with same # of row but sorted for NULL

    - by VISQL
    I need to join two tables with the same number of rows. Each table has 1 column. There is NO CONNECTING COLUMN to reference for a join. I need to join them side by side because each table was sorted separately so that numeric values are at the top in descinding order. The Table Earners has income values from say 200K down to 0. I cannot just select using 2 cases, because then I will have my first row with Incomes above 100K, but the first 20 or so entries in the second row are NULL. I want the second row to also be sorted descending. I looked up using ORDER BY within CASE but there is no such thing. I have tried to read about row_number() but none of the examples seem to match or make sense. drop table #20plus select case when Income >= 20000 AND Income < 100000 then Income end as 'mula' into #20plus from Earners order by mula desc drop table #100plus select case when Income >= 100000 then Income end as 'dinero' into #100plus from Earners order by dinero desc Select A.dinero, B.mula FROM #100plus as A JOIN #20plus as B ON A.????? = B.????? Since both A and B are sorted descending, moving all NULL to the bottom, what can I reference to join the two tables? Previous output using one SELECT statement with 2 CASE statements dinero mula 2.12688e+007 NULL 1.80031e+007 NULL 1.92415e+006 NULL … … NULL 93530.7 NULL 91000 NULL 84500 Desired output using one SELECT statement after creating two temp TABLES dinero mula 2.12688e+007 93530.7 1.80031e+007 91000 1.92415e+006 84500 … 82500 NULL 82000 NULL … NULL NULL This is Microsoft SQL Server 2008. I'm super new to this, so please give an answer as clear and simplified as possible. Thank you.

    Read the article

  • Getting Depth Value on Kinect SDK 1.6

    - by AlexanderPD
    this is my first try on Kinect and Kinect SDK so I'm having a lot of "newbie issues" :) my goal is to point my mouse on the Kinect standard video output and get the depth value. I already have both normal video and depth video outputs by using the 2 "Color Basic-WPF" and "Depth Basic-WPF" samples, and handling mouse events or position is not a problem. In fact i already did all and i already got a depth value, but this value is always HIGHLY imprecise. It jumps from 500 to 4000 by just moving to the next pixel in a plane surface. So.. I'm pretty sure I'm reading the depth value in the wrong way. This is how i read it: short debugValue = depthPixels[x*y].Depth; debug.Text = "X = "+x+", Y = "+y+", value = "+debugValue.ToString(); i know it's pretty out of context, this little piece of code is inside the same SensorDepthFrameReady function in "Depth Basic-WPF"! "x" and "y" are the mouse coordinates and depthPixels is DepthImagePixel[] type, a temporary array filled with the "depthFrame.CopyDepthImagePixelDataTo(this.depthPixels);" instruction. Depth frame is filled here: DepthImageFrame depthFrame = e.OpenDepthImageFrame() the "e" comes from here: private void SensorDepthFrameReady(object sender, DepthImageFrameReadyEventArgs e) and this last one is called here: this.sensor.DepthFrameReady += this.SensorDepthFrameReady; how i must handle that depth value i get? I know the value must be between 800 and 4000 but i get values between about 500 and about 8000. i already google a lot (here on SO too) and i still can't understand if the depth value is 11 or 13 bit. The sdk examples uses shrink this value to 8 bit and this is making even more confusion in my head :(

    Read the article

  • Collision detections and how efficient they are

    - by Shadow
    How exactly do you implement collision detection? What are the costs involved? Do different platforms(c/c++, java, cocoa/iphone, flash, directX) have different optimizations for calculating collisions. And lastly are there libraries available to do this for me, or some that I can just interpret for my platform of choice? As I understand it you would need to loop through the collision map and find the area in question and then compair the input thing(e.g. a sprite) to the type of pixel that is in the questioned area. I understand the very basic idea, but I don't understand the underlying implementation or even a higher level one for that matter. It would seem that this type of detection, or any for that matter, is very costly. Tile map? Bit array? How are these created from an image(I would guess looping and doing stuff)? The reason I ask this question is to get a better understanding of the efficiency behind the scenes and to understand exactly what is going on. Links, references, or examples would be very helpful. I know this question is a bit longwinded so any help or references would be very welcome. Thanks SO!

    Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >