Search Results

Search found 9845 results on 394 pages for 'ntp servers'.

Page 219/394 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

• UPS recommendations for three grey boxes?

  - by Margaret

  Hey all We have a series of grey-box style computers acting as servers at my workplace (rather than rack-mount). We were looking to get Uninterruptible Power Supplies for them. However, I'm not sure how many at what capacity are required. I'd assume it would be a good idea to hook the peripherals in as well - there's a 18.5" LCD monitor with a KVM, along with a couple of USB hard drives that require power. I currently have the most vital machine hooked up to a cheap (temporary) UPS, but it's probably close to worse than nothing. I'm looking for reasonable value for money, though I can probably negotiate with my boss on price range. I recognise that I may well need to buy two (or even three) UPSs to support the three machines. Any recommendations?

  Read the article

• Throttle connections to web service if load gets too high?

  - by Joseph Turian

  I have a web site that communicates via XMLRPC with an XMLRPC server web service. (The web service is written in Python using xmlrpclib.) I believe that xmlrpclib will block while it is handling one request. So if there are three users with an xmlrpclib request ahead of you, your response takes four times as long. How do I handle it if I receive too many XMLRPC requests and the web service gets bogged down and has slow response time? If I am getting slashdotted, my preferred behavior is that the first users get good response times and everyone else is told to come back later. I think this is superior to giving everyone terrible response times. How do I create this behavior? Is this called load-balancing? I am not actually balancing though, until I have multiple servers.

  Read the article

• Performance difference between compiled and binary linux distributions/packages

  - by jozko

  I was searching a lot on the internet and couldn't find an exact answer. There are distros like Gentoo (or FreeBSD) which does not come with binaries but only with source code for packages (ports). The majority of distros uses binary backages (debian, etc.). First question: How much speed increase can I expect from compiled package? How much speed increase can I get from real world packages like apache or mysql? i.e. queries per second? Second question: Does binary package means it does not use any CPU instructions that was introduced after first AMD 64bit CPU? With the 32bit packages does it mean that the package will run on 386 and basically does not use most of the modern CPU instructions? Additional info: - I am not talking about desktop, but server environment. - I dont care about compile time - I have more servers, so speed increase more than 15% is worth for using source code packages - Please no flamewars. Thank you very much

  Read the article

• Setting-up Windows Server 2003 as an L2TP/IPSEC VPN server

  - by andyjohnson

  I'm looking for a pointer to step-by-step instructions for setting-up a Win Server 2003 Std box as a L2TP/IPSEC VPN server. I don't need to use certificates - pre-shared key is sufficient - and the server isn't on a domain. All the sources of information I've found assume a level of sysadmin experience that I don't have - which is why I'm looking for a step-by-step description. I'm a experienced developer, not an IT person, but I have what I'd guess is intermediate level experience of configuring/administering small-scale servers, and have set-up OpenVPN-based VPNs on Windows.

  Read the article

• Round-Robin DNS in mobile networks

  - by k7k0

  After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

  Read the article

• Customizable mail server - what are my options? [closed]

  - by disappearedng

  This question was originally on SO but it was closed since it is considered off topic. I am interested to build a mail service that allows you to incorporate custom logic in the your mail server. For example, user A can reply to [email protected] once and subsequent emails from user A to [email protected] will not go through until certain actions are taken. I am looking for something simple and customizable, preferably open-sourced. I am fluent in most modern languages. What email servers do you guys recommend for this? Mailgun looks promising, but are there any simpler options?

  Read the article

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• How to properly configure personal domain to send emails and pass spam filters? Is email forwarding enough?

  - by ChocoDeveloper

  I'm using my own domain from Namecheap, and another company for the mail hosting for my personal email. I configured my domain to forward *@mydomain.com to the account I was given in the mail hosting company. I can send and receive emails, but I'm wondering if the emails I send are being flagged as spam sometimes. I remember when I used my own mail server years ago, there were mechanisms for my domain to say "this mail server is allowed to send emails as [email protected]", like adding a TXT record or something. So the questions are: Is email forwarding enough? Will mail servers understand that the mail server is allowed to send emails on my behalf? Is there a testing mail server where I can send an email and be told whether it thinks it's spam?

  Read the article

• Connection to SQL Server 2008 R2 Database Server is SLOW

  - by AbeP

  The database server is a VM running SQL Server 2008 R2 on top of Windows Server 2012, 24GB RAM allocated and 2TB of disk space. Overall, the database connections are very slow and one thing that stands out is that the connection to the database server via SSMS takes 5-10 seconds. On other much less powerful servers, it takes 1-2 seconds. The VM is technically way more powerful than other machines, but the connection to the server is too slow. So, my guess is the issue is network related, but any clues on where I should be looking? Thanks!

  Read the article

• Yet another "can't connect to MySQL over the network" question - but i seriously tried everything

  - by mireille raad

  Hello, I was left with the easy task of installing moodle. I am VPNing to 2 servers, one for the database and the other apache/php server 1 must connect over LAN to the mySQL db on server 2 I added a user with following priveleges : +---------------+------------+ | host | user | +---------------+------------+ | % | mir | | 10.10.40.15 | mir | | x.x.x.x | mir | | localhost | mir | Disabled firewall temporary made sure that my username/password combinations are correct, flushed priveleges, restarted mysqld i wnt to /etc/my.cnf .. if i try to add the port=3306 bind-address=10.10.40.15 or anything that is different from 0.0.0.0 or 127.0.0.1 - mysql wouldn't restart i read and tried many forums and pages and asked friends for tips but nothing works So my question to you : are there any networking extensions that need to be installed for mysql, how do i know nothing is missing from the installation any troubleshooting tips, any idea how to fix this, any step by step check list, am i missing something simple/stupid, please anything that comes to mind, let me know Appreciate your feedback on this friday night stuck at work :P

  Read the article

• IIS 7 - Provisioning portal

  - by Doug

  I am wanting to setup our production IIS environments with a provisioning portal to ensure that deployment staff always setup sites in a uniform configuration, and that they don't actually have remote access to the servers directly. What is the best 'simple' provisioning tool for such a purpose? Do people write their own using something like Powershell remoting? I don't want to install a tool like HELM or similar as it feels like it creates unnecessary bloat on top of a production environment. features should include: create new website and app pool combo restart, start and stop application pools change bindings on websites

  Read the article

• Windows 2008R2 two node failover cluster creation fails

  - by Francois Wolmarans

  We have just installed two Windows 2008R2 Enterprise machines with identical hardware. When running the cluster validation everything is ok. When creating the cluster it fails with the following error: An error occurred while creating the cluster. An error occurred creating cluster 'CLUSTER04'. The parameter is incorrect The logfile on the first node where we are running our config from, does not show any errors. On the second node we get: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. I've double checked and all communication between the servers are fine. Even when creating a one node cluster it gives the error. There are other failover clusters we have setup without any issues.

  Read the article

• How to maintain PCI compliance on a LAMP server when repositories don't keep up with versions

  - by Jared Green

  We run Ubuntu Lucid 10.0.4 as the foundation of our LAMP environment. We are trying to become PCI compliant so that we can pass CC info through our server. We have run some third-party scans on our servers to begin the certification process and have run into errors regarding PHP 5 versions and Apache versions. The latest PHP version hosted in our official lucid repository is about 10 versions lower than what PCI compliance requires. How do we upgrade to stay current with PCI compliance requirements? We need to get from php 5.3.2 to php 5.3.15 As well as up to apache 2.2.23 I've searched far and wide for an answer and haven't come up with a realistic answer. Some recommend compiling manually - which sounds like a nightmare, and others recommend a PPA - which sounds insecure. What should we do?

  Read the article

• Cisco ASA - Enable communication between same security level

  - by Conor

  I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

  Read the article

• Windows 2003 Server R2SP2 throws even ID 2269 after installing Excel WebPart in MOSS3

  - by Phil

  We recently added an Excel workbook webpart (read only excel file - no editing) on our Sharepoint 2007 server. Once we did that, approximately 3-4 times an hour event ID 2269 is shown in the Application Log and a few minutes after that, an event id 1002 is displayed in the system long and the Sharepoint Offfce Servers Application pool shuts down. We've already check the "Bypass traverse checking and DCOM settings) per the MS KB and I have opened a ticket with MS Support. Problem is that MS Suppoert (sharepoint) thinks it is an IIS problem and the IIS people think it is a Sharepoint issue. Anyone else seen this problem? If we remove the Excel webpart, everything goes back to normal. The App Pools, SP and SP Central Admin sites are all using the same domain service account. Thanks in advance, Phil

  Read the article

• sharepoint administrative server not started causing sharepoint deployment instability

  - by Nathan

  When i deploy anything to a variety of sharepoint servers i get problems with some packages failing, from what i can see the only error given is as below. The timer job for this operation has been created, but it will fail because the administrative service for this server is not enabled. If the timer job is sched uled to run at a later time, you can run the jobs all at once using stsadm.exe - o execadmsvcjobs. To avoid this problem in the future, enable the Windows ShareP oint Services administrative service, or run your operation through the STSADM.e xe command line utility. Is this a known problem? I googled for the text but got only one other person with the problem who simply worked round it. I'm trying to batch deploy solutions programmatically and so these errors render the whole code worthless if you have to go back and redo bits by hand afterwards. Is batch deployment simply not possible? Thanks!

  Read the article

• How difficult is it to setup a mailserver?

  - by Jacob R

  I want a secure mail solution, as I am looking to move away from Google and other parties looking into my private data. How much of a PITA is it to setup my own mailserver? Should I go for an external provider with a good privacy policy and encrypted data instead? I have a VPS running Debian (with a dedicated IP + reverse DNS), and I'm a fairly capable Linux administrator, having setup a couple of webservers, home networks, and looking over the shoulder of sysadmins at work. The security I currently have on the VPS is limited to iptables and installing/running the bare minimum of what I need (currently basically irssi and lighttpd). When setting up a mail server, is there a lot of stuff to take into consideration? Will my outgoing mail be marked as spam on other servers if I don't implement a number of solutions? Will reliable spam filtering be difficult to setup? Can I easily encrypt the stored mail?

  Read the article

• HTTP Range request rejected

  - by Dan

  I am trying to understand why my production environment might be disallowing HTTP RANGE requests. I have a pool of W2K8x64/IIS7 servers behind a pair of Netscaler 9000s. I compose the following request in Fiddler: http://myorigin.example.com/file.flv User-Agent: Fiddler Host: myorigin.example.com Range: bytes=40000-60000 The response looks like: HTTP/1.1 200 OK Cache-Control: public Content-Type: video/x-flv Expires: Thu, 24 Jun 2010 18:23:53 GMT Last-Modified: Sat, 11 Apr 2009 00:16:14 GMT Accept-Ranges: none ETag: f9d5c718-e148-4225-9ca6-d1f91a2a3c08-_633749805744270000 Server: Microsoft-IIS/7.0 Edge-Control: max-age=2592000 X-Powered-By: ASP.NET Date: Tue, 25 May 2010 18:23:53 GMT Content-Length: 443668 "Accept-Ranges: none" tells me that the range request was rejected, but I am not sure where/why as IIS7 accepts Range by default. Could the 'scalers be shooting it down? Thanks, Dan

  Read the article

• Information about Release Management in a Virtual Studio development environment

  - by Bordersquirrel

  Our software development team is growing very quickly. We have around 250 developers working on about 20 different projects. The majority of development is focused around Visual Studio. The release management procedure is getting a little strained now, with users competing for time and resources on various "official" build and signing servers. What I'm looking for is information on how to setup a proper, managed release process in a Microsoft environment. Ideally, I'd like some kind of continuous integration or nightly builds, integration of version control into Visual Studio and the ability to sign binaries after QA is complete. I guess what I'm looking for is any documentation or white papers on Release Management in a Visual Studio environment. Can anyone help?

  Read the article

• Load balance incoming traffic

  - by justin

  Dear All Please I have the following scenario. 3 servers voip / mail / terminal one load balancing router 2 internet connections (static ip`s) My concern is to load balance incoming traffic since the outgoing traffic is being taking care by the load balancing router. For instance all offices connect to the mail server via the internet same for voip and terminal services. The mail and voip clients are set up with one of the static ip`s and the router forwards the request to the appropriate server. But obviously like this there is no fail over nor load balancing cause all requests are being directed to one internet connection. Anyone has a suggestion was thing of a dns server, does this make sens ? or maybe a hosted option ? Thanks Justin

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Disable/enable the proxy on a tab by tab basis in Firefox

  - by Rich

  Is it possible to disable/enable the proxy connection on a tab-by-tab basis in Firefox? I can access the internet with the proxy enabled, and I can access our internal servers with the proxy disabled, but neither configuration allows the other. I have a feeling that Firefox 4's per tab profiles may permit this, but was wondering whether there was a way to achieve this on Firefox 3.6.13, perhaps through the use of an extension. For the moment I'm making do with quickProxy (not QuickProxy which I've just discovered while trying to find quickProxy) which allows me to switch the proxy on and off for the whole browser, but would prefer something more fine-grained.

  Read the article

• Implications and benefits of removing NT AUTHORITY\SYSTEM from sysadmin role?

  - by Cade Roux

  Disclaimer: I am not a DBA. I am a database developer. A DBA just sent a report to our data stewards and is planning to remove the NT AUTHORITY\SYSTEM account from the sysadmin role on a bunch of servers. (The probably violate some audit report they received). I see a MSKB article that says not to do this. From what I can tell reading a variety of disparate information on the web, a bunch of special services/operations (Volume Copy, Full Text Indexing, MOM, Windows Update) use this account even when the SQL Server and Agent service etc are all running under dedicated accounts.

  Read the article

• Installing and maintaining an email server

  - by Andrew

  I need to move hosting providers for four or five domains and for several reasons I'm considering a Linux VPS rather than staying with my current shared, managed hosting provider. The only thing that's stopping me is email. I have lots of experience running and maintaining Apache, but none with email servers. Based on some research, if I want to keep what I've using now, it looks like I'd be going with Postfix and Dovecot, and probably Exim and SpamAssassin. I have no problem performing regular maintenance and watching for security updates, but I don't want to bite off more than I can chew. For someone new to email services, how hard is it to set up an email server that is externally accessible (via SMTP and POP3, not IMAP), available over SSL/TLS and reasonably reliable for multiple domains? How much of a time commitment is it to maintain one?

  Read the article

• How is my ISP DNS hijacking AFTER all these precautions?

  - by user973917

  In IE9 when I search for anything my ISP hijacks google search and I get this result. To add complication to this I've already changed the default DNS servers (OpenDNS) months ago. This only happens in IE9; even after machine reboots and cache flushing. I even have my router (dd-wrt) intercepting all requests for DNS and I am still getting this result. I have all extensions disabled and there are no toolbars. This is IE9 from M$. This is not malware; it happens all machines with IE installed (even IE7/8).

  Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >