Search Results

Search found 7374 results on 295 pages for 'strange behaviour'.

Page 219/295 | < Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >

  • OS X won't boot up unless I hold down option key

    - by Gazzer
    I have a strange issue on an early 2008 Mac Pro running OS 10.6: if I restart the computer it restarts normally if I shutdown and boot, it stops at the grey screen just before the boot process if I shutdown and boot but hold down the option key, I can select the boot disk and all is good. I've just cloned the disk, and the same thing happens. The disk is a SAMSUNG HD154UI The disk is partitioned (the second partition holds a clone of the Snow Leopard Install disk) One weird thing on the original disk was one of the partitions said 'EFI Boot' in a non-aliased font rather than the name of the disk when the disks are listed upon holding down option. Solution: it seems that there was a problem with the disk. Part of the difficulty in finding the solution was that you need to remove the disk from the computer completely. For example, a good disk in Bay 3, wouldn't boot up if the bad disk was in Bay 2. So for ages I thought the problem was hardware related in Bay 3. So if you think you have a dodgy disk remove it totally if you are testing the hardware with a 'clean' disk. Cleaning the PRAM helped to get the new disk to work too.

    Read the article

  • What can I do to determine the root cause of a Windows server hanging/freezing?

    - by Aaronaught
    We set up a new server here a few weeks ago that I am informally responsible for managing. Almost everything works perfectly except for one thing: Every so often it hangs without warning. To clarify: When I say hangs, I mean completely. None of the services respond and I'm unable to even get onto a local console - the display acts as though there's no VGA signal. One time, the server actually responded to pings, another time I got the "destination host unreachable" response, but most of the time the pings just time out, as one would expect for a hung server. Event logs don't show anything after a reboot. I don't mean that they don't show anything interesting, I mean that they don't show anything at all from before the failure occurs to after the reboot. And there are never any performance problems, strange errors, or other obvious signs of impending doom before it happens. I don't expect any easy answers here. What I'd like to know his I can methodically determine the root cause of this problem, be it a misbehaving service, defective hardware, or something else. Is there any kind of logging I can set up that will help me get to the bottom of this? Any hardware diagnostics or remote monitoring? Anything else I can do to help me discover what's actually happening, or at least be able to eliminate what isn't wrong? Just to reiterate, I really don't want to start speculating about possible causes and take a trial-and-error approach, because it's going to be at least several days at a time before I would have conclusive results. I'm looking for solutions to reliably trace the problem to its source.

    Read the article

  • Partition is missing in /dev

    - by haimg
    I'm having a strange problem since I moved from Centos5 to Centos6. I have three disks, first two are used as a RAID1, and third one is a stand-alone backup disk that is not listed in /etc/fstab (it is mounded when needed and then unmounted). My problem: After a boot, /dev/sdc exists but /dev/sdc1 does not. Also, the links in /dev/disks are also absent for the first partition of sdc. Disk itself is fine, and if I hot-remove it and plug it back in, /dev/sdc1 appears ok and everything is working. My question: What subsystem manages auto-discovery of disks, partitions, etc. during the boot process (e.g. what creates /dev/disks/by-label)? How do I configure it to scan /dev/sdc too and create all relevant files and links in /dev ? Edit: Here's the relevant part of dmesg output (the only place sdc appears). It does list sdc1, but it's not in /dev! sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdc: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: DMAR:[DMA Read] Request device [00:1e.0] fault addr 361bc000 DMAR:[fault reason 06] PTE Read access is not set sdb1 sdb2 sdb3 sdc1 sda1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk

    Read the article

  • Can't remote into Virtual PC

    - by Spamela
    I used to be able to remote into my Virtual PCs. It has been working for at least a year. Yesterday just stopped working... I cannot figure it out... Things I have triple-checked: 1. My Virtual PCs have "Allow Remote Access" checked. 2. My Virtual PCs have an account in the Administrator group that is password protected. 3. My Host's entry in the registry for the Terminal Services Port is still the default of 3389. So here is the strange thing. I can't even remote into the Virtual PC from it's host much less another PC... From the host, I can ping the Virtual PC and get a response but when trying to remote into it from the host I get the following error: Remote Desktop can't connect to the remote computer for one of these reasons: 1)Remote access to the server is not enabled. 2)The remote computer is turned off 3)The remote computer is not available on the network My host is running Windows 7. Virtual PCs are running XP. Thank you for looking at this!

    Read the article

  • Unable to set initcwnd on a Hetzner server

    - by Sergi
    We just ordered a bunch of Hetzner EX40SSD servers with the minimal Debian install image that they provide and everything is just fine except that looking at tcpdumps for fine tuning the network from various locations the initcwnd param seems to be stuck at 6 no matter how we change it. By default Debian 3.2 kernels should have that setting to 10 so it's pretty strange. Is it possible that the NIC driver or a custom setting in the Hetzner Debian image is limiting this param? Even if we set it to 4, like the old kernel default, it doesn't work. Any ideas would be much appreciated! Does anyone know if the NIC drivers provided by default by Debian have some kind on limitation. In a long thread in http://www.webhostingtalk.com/showthread.php?t=1200617&highlight=hetzner they talk about a page http://wiki.hetzner.de/index.php/Installation_des_r8168-Treibers/en where Hetzner states that the included Realtek r8168 driver is not working properly, but nowhere do they say that the initcwnd could be affected. Tomorrow i will try to install a CentOs image and see if Debian is the problem...Last resort would be to install a custom debian image, but that is a pain in the ass! Thanks!

    Read the article

  • processes slow after some time of actively running

    - by Yervand Aghababyan
    i have several cron jobs running on an ubuntu machine. each one does some pretty heavy load stuff. The cron jobs are parsing files and the bigger the file the longer it takes them to parse it. The strange thing is that if i make the files too big ( like 30mb) the script kind of hangs. It starts processing them really enthusiastically but after some time (something like 5-10 minutes) the cpu usage of the process drops a lot and it gets into some "zombie" state. If prior to this the process in htop was using 70-80% of the CPU then after this drop occurs it slows down to something like 5-10%. the load average drops down as well. The status of the processes sometimes changes to D in htop, which AFAIR stands for zombie. Today i noticed the same behavior of processes of mysql when executing heavy queries (a query took something like 4 hours to execute). the cron jobs are mostly php and during their processing most of the CPU eats the php process and not mysql. so i think the issue is not with a specific language/program but with the way the processes are "managed". The only other place i've seen similar behavior was on my Amazon EC2 micro instance when after some aggressive use of CPU the CPU quota was taking effect and everything was slowing down dramatically. This is a dedicated machine running ubuntu. what may be the cause?

    Read the article

  • How to reinstall bootloader after migration to SSD

    - by hijarian
    I must say, it was difficult to name this question. Basically, I need to properly reinstall the bootloader on my system, because I already have the working system disks for my OSes. The long story is this: I had the large slow HDD with Windows7 & Debian Wheezy dual-boot on it, perfectly bootable. Then, I ordered the SSD drive and prepared my system partitions to fit onto the much smaller SSD. I wanted the following schema: 128 GB Windows 24 GB / on Debian 86 GB /home on Debian Strange size for /home because there's no such thing as true 256GB disk drive. So, I've prepared such a partitions on my initial HDD and installed the new SSD and then I loaded the GParted live USB (can't remember now how it was really named), and then just copypasted the partitions from HDD to SSD. So, now I have the following partitions across the physical disks: SSD 128 GB copy of original Windows partition 24 GB copy of presumably Debian / 86 GB copy of presumably Debian /home HDD 128 GB Windows 24 GB / on Debian 86 GB /home on Debian ... several other partitions with non-system data ... And the behavior of the system right after the Ctrl+C, Ctrl+V in GParted was as follows: no GRUB, system boots right into the Windows on HDD. In BIOS settings are to boot from SSD first. I managed to create the Debian Testing installation USB and loaded it into the rescue mode, found that it identified my SSD as /dev/sda and installed the GRUB to the /dev/sda. Now my system loads the GRUB which lists both Windows and Debian. From HDD. So, I am now back into initial position. Please, how I should set up the GRUB so it'll load the OSes correctly from SSD? Should I fire up my Debian, fiddle with the GRUB's config and reinstall it again to the same place (at SSD)?

    Read the article

  • Browsers behaving very strangely/not working in Windows Vista SP 2

    - by Kim_guest
    Sorry, that I'm posting this as a guest, but I couldn't log in. Maybe you can help me. I had a virus and gave this inspiron 1525 laptop to a computer expert, who removed it. I think he reinstalled Windows, because when I got it back IE 7 was installed. So after 3 hours I installed SP 1, SP 2, IE 9 and Google Chrome. First when there was only SP 1 and IE 7 installed, I could only use Google in IE, and I had copy the links download links of the updates (Update center didn't work) over to Google Chrome to download it there, because I couldn't do that in IE. Now I can't use Google at all, but strangely Bing works. Also I can display certain pages, but not all (I could open StackExchange, but not the login page; that's why I'm posting this as a guest). Another strange thing is, that now a webpage either works in both browsers (I couldn't install Opera, because the installer says it can't download the files) or in none. It is a 32 Bit system. It would be nice if you could help! I hope I will be even able to post this question...

    Read the article

  • Dosbox USB print Windows 8.1 64Bit

    - by eCronik
    Worked fine until I've upgraded to Windows 8.1 as well as made the mail programm working (had to get a windows live ID and have to type in a password now, when starting Windows). I did set the USB printer to lpt1 on the local Windows 8 computer and another XP computer via LAN to lpt2 the same way with the same printer on the Windows 8 computer. But now it doesn't work anymore from the Win8 one (where the printer is plugged via USB). Tried already deleting lpt2: on the XP one, as well as lpt1 on the Windows 8, resetted it. Not working... :-( I tried also net use lpt1: \server\printer password "\user:Ute Berger" /persistent:yes of course with the correct server and shared printer name as well as net use \server\printer "\user:Ute Berger" password /persistent:yes . This is the name displayed as a user now. But in C:\users it is named Benutzer1. Tried this one also. Nothing worked. What could be the problem here? What's strange is that when I type "net use lpt1:" on the XP, I get another error (67 - The networkname wasn't found) than trying something I didn't set up like lpt2 (2 - The system can't find the file). Could this be a possible problem as even if deleted something is left blocking on the Windows 8 computer? Please help me - I tried for hours today but all I've got was frustration... Regards Tim

    Read the article

  • exim4 seem to stop listening

    - by trakos
    Hey, I have a strange problem with my exim4 configuration. I have a dedicated server running debian for quite a long time now, but I'm not really using it actively recently, so everything just worked due to lack of changes ;) However, recently, my exim4 smtp stopped answering on port 25. It does not respond through localhost, as well - even though it's set to listen on any interface available. Some things I've checked: ks:/home/trakos/Maildir/new# netstat -ap | grep exim tcp 0 0 *:smtp : LISTEN 12521/exim4 ks:/home/trakos/Maildir/new# exiwhat 12521 daemon: -q30s, listening for SMTP on port 25 (IPv4) ks:/home/trakos/Maildir/new# cat /var/log/exim4/rejectlog ks:/home/trakos/Maildir/new# cat /var/log/exim4/paniclog The queue is set for 30s only because I was running it in a non-daemon mode to see any output. Strangely enough, no suspicious output is given, netstat even shows it is listening on port 25, but still trying to telnet to it times out. The only things that may have changed recently are: I've got second IP for my server I remember that few days ago my spamassasin crashed, and I've started it up again So yeah, I'm really clueless about this one now :P I mean, I don't even know what could be failing here. Could someone give me some ideas what should I check next? PS: it has uptime of 442 days, so I haven't really tried rebooting it yet ^^

    Read the article

  • External-Harddisk drive couldn't run unless in safe mode

    - by zfm
    This is the strangest thing ever happened to me... I have an external harddisk drive (ext-HDD), bought around 2 years ago (don't know whether this is an important issue or not). Here, I have a video file (.avi) in my internal harddisk dive (HDD), it worked very well, then I copy it to my ext-HDD, but I couldn't run the file directly from my ext-HDD! I tried to copy it back to my HDD (from the ext-HDD), and now the copy couldn't be run on my HDD too. Remember that I copy the file, so the original one was still there. I tried to go to safe mode (forget to mention, I use Windows 7 Pro), and this is where the strange thing happened, the copied files (both in ext-HDD and HDD) can be run in this safe mode. So, my question is, what could actually be happened there? PS: My ext-HDD is Axioo, 250 GB, exFAT... Edited: Currently I used MacOSX, and the file in the harddisk still can't be run. I haven't tried safe mode for Mac (is there one?), but will try later (if there is)

    Read the article

  • Servers/Websites Keep Going Down

    - by Tyler Johnson
    Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps Type: Linux

    Read the article

  • Connecting a Wifi router to receivers with a cable instead of antenna?

    - by 31eee384
    This is a very strange question--I'd go so far as to say it's a stupid question. I'm being told that it is possible to, to describe it briefly, use a cable to connect an access point and a receiver directly to one another. This means that I would unscrew the access point's antenna, and attach one end of a cable to the port. Then, on the wireless receiver, I would also unscrew the antenna and plug in the other side of the cable. I'm being told the connection would work after this, just as a normal Wifi connection would. Bonus mini-question: if this works, would it still work if a splitter were attached to the access point and multiple receivers plugged in to the network? What would happen if I do this? Based on my surprisingly deficient knowledge of radio transmission, I don't think it would work. I would like some help knowing why it won't (or will) though, if possible. This is a somewhat hypothetical question--I realize that Ethernet does this exact job very handily, and I could just throw in a switch instead of the splitter. I simply feel that I should understand this scenario. Thanks for any help you can offer.

    Read the article

  • Win 7 Remote Desktop connection failure when already logged in.

    - by Andy E
    I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

    Read the article

  • Magical moving desktop icons

    - by Nathan Taylor
    I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

    Read the article

  • DirectAdmin Centos4 server has virus

    - by Rogier21
    Hello all, I have a problem with a webserver that runs Centos4 with DirectAdmin. Since a few weeks some websites hosted on it are not redirecting on search engines properly, they are redirected to some malware site, resulting in a ban from google. Now I have used 3 virusscanners: ClamAV: Didn't find anything Bitdefender: Found a 2-3 files with JS infection, deleted them AVG: Finds lots of files, but doesn't have the option to clean! The virus that it finds is: JS/Redir JS/Dropper Still the strange thing is: website a (www.aa.com) does not have any infected files (have gone through all the files manually, is a custom PHP app, nothing special) but does still have the same virus. Website b (www.bb.com) does have the infected files as only one. I deleted all these files and suspended the account, but no luck, still the same error. I do get the log entries on the website from the searchengines so the DNS entries are not changed. But now I have gone through the httpd files but cannot find anything. Where can I start looking for this?

    Read the article

  • SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

    - by Setesh
    Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

    Read the article

  • USB-to-Serial showing gibberish at 115200 Baud

    - by Mose
    I've got a serious problem which drives me crazy because I tried everything I could think of. First of all, I made a video: http://youtu.be/boghkuq7L_s but please read the following text for more information, not only view the video! When using a USB-to-Serial interface everything works as long as I don't go beyond 57600 Baud. At higher rates I only get giberish like this: év.­b0JNLYÆÿ¿iëd0U²(kßÞb! ú]/xscB!ï¯!BoXûÿ1ïâÖCÿ6ÌAnè*íÌC)º¿BíÞØ.C.@ÆÃwHJÂs "YE:ñ.èFðÌCÊ÷ÞÄ !x H w6@BtbHJ ̪ Ì6ì H¾a¿bH.">îvy®;f<ßBÌ p­L¨fæH­E ­þ¼MBÞI What makes the problem so strange is, I exchanged every component and the problem still presists. I tried differtent OSes (Ubuntu, WinXP, Win7, OSX 10.7) with 32 and 64 Bit. I tried USB-to-Serial interface from FTDI and Prolific. I tried reading the output from my Raspberry PI and from an Asterisk Appliance. I changed the cables and the wiring. Nothing helped. In the video I made a example with a old Notebook with native COM and put the USB-to-Serial to the same connection as "sniffer" (only Rx and GND connected) to make sure the output and everything is ok as one can see on the native port. The voltage is ok. Settings for both are 115200 Baud, 8 Bit with 1 Stop and no flow control. Native is ok. USB is messed up. I used the newest drivers and double checked all connections. I have no idea what is wrong here. As I couldn't find anyone describing problems like this I question my long experiance in computer science and think I'm doing some completly wrong... Please help :-/

    Read the article

  • Ubuntu: Memory Leak

    - by Keener
    I'm having trouble finding from where this memory leak is occurring. I'm running Ubuntu 8.04 LTS on a Dell XPS M1530. I have 3GB of ram and I'm finding after about an hour or so of use top shows me 2GBs+ used. The strange thing is when I add up the memory percentages by PID either from top or ps aux I find that I should only be using about 20-25% of my available ram. What brought this to my attention was I've begun running vmware server again. Now, obviously the ram usage spikes when I load a virtual machine, but the memory VMware is using does not account for the memory usage I'm seeing via top or free. Stopping vmware server releases the memory which was allocated to it, but I'm still unable to find where this RAM is being used. After a complete reboot, of course, the memory is fine, but very quickly it climbs to 60-80% usage with the processes only appearing to account for a third of that. Any ideas where I should look for more information on what this could be?

    Read the article

  • Western Digital HDD now freezes my BIOS when loading the video card!

    - by Vercas
    After I have successively and successfully installed 3 Windows XP's on the same partition (Don't ask why...), I restarted my computer again and the BIOS just froze when it loaded the video card. Together with my uncle, we tracked down the problem and found out it's the HDD's fault. We tried booting without the HDD and it worked! (No other HDD (I have only one) but with a Ubuntu Live CD in.) We tried the HDD with a different data bus (It was from an identical computer) but that one didn't let my BIOS recognize the HDD. We also put the HDD in another computer as the second HDD and it DID recognize it but Windows XP kept saying it cannot install a driver and that it installed successfully. Happily, I have managed to backup some of my most important files in that other computer. The following is a list of tests that we have run. With the HDD Original data bus Original computer Result: BIOS freezes WITHOUT the HDD Original data bus Original computer Result: Everything works just fine! With the HDD ANOTHER data bus Original computer Result: Cannot see the HDD With the HDD Original data bus ANOTHER computer Result: It worked! With the HDD ANOTHER data bus ANOTHER computer Result: It worked! During the tests, we had only two data buses and two computers. (each data bus from it's own computer) Strange thing is that the second data bus cannot let the BIOS see the HDD in my computer but works just fine with the other computer. I beg you to help me! I have my most important data on that HDD and I really cannot afford to buy another decent IDE HDD now!

    Read the article

  • How to add extensions to a lot of files using content of each file?

    - by v8media
    I've got over 10,000 files that don't have extensions from older versions of the Mac OS. They're extremely nested, and they also have all sorts of strange formatting and characters. They don't have file types or creator codes attached to them any longer. A great deal of these files have text in the file that will let me determine extensions (for example Word.Document.8 is in every file created by that version of Word, and Excel.Sheet.8 in every file created with that version of Excel). I found a script that looks like it would work for one of these file types at a time, but it erases parts of filenames after nefarious characters, which is not good. find . -type f -not -name "." -print0 |\ xargs -0 file |\ grep 'Word.Document.8' |\ sed 's/:.*//' |\ xargs -I % echo mv % %.doc So, two questions from that: One is, should I clean the characters in the filenames first, or programmatically deal with those in the script in order to leave them the same? As long as I lose no information from the filenames, I don't see a problem cleaning out slashes and other problem characters. Also, if I clean the filenames, there are likely to be duplicates, so any cleaning script would have to add something like "-1" before the extension to make sure nothing gets lost. 2nd question is how do I change the script so that it will look for more than one file type at the same time and give each the proper extension? I'm not tied to this script, but it is understandable, which is a pro. Mac OS X 10.6 is installed on this file server, but I've got access to any recent versions of OS X. Thanks, Ian

    Read the article

  • SSH attcack CentOS Amazon EC2

    - by user37143
    Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

    Read the article

  • Trying to communicate between virtual servers on the same host through ipv6

    - by Daniele Testa
    I am running KVM on a host with 2 virtual servers. Each virtual server has a own bridge interface on the host VPS1 has br1 VPS2 has br2 Each virtual server has a own ipv4 and a ipv6. The virtual servers has no problem communicating with internet or with eachother through ipv4. However, with ipv6, they can only communicate with internet and NOT with eachother. The host can ping the 2 virtual servers without any problems, but they cannot ping eachother. iptables has been set to ACCEPT on all chains, so it is not the problem. VPS1 has ipv6 = 2a01:4f8:xxx:xxx::10 VPS2 has ipv6 = 2a01:4f8:xxx:xxx::5 the host has the following routes set: ip route add 2a01:4f8:xxx:xxx::10 dev br1 ip route add 2a01:4f8:xxx:xxx::5 dev br2 When I do a ping from VPS2 to VPS1, I see the following on the host: tcpdump -i br1 15:32:27.704404 IP6 2a01:4f8:xxx:xxx::10 > ff02::1:ff00:5: ICMP6, neighbor solicitation, who has 2a01:4f8:xxx:xxx::5, length 32 So it seems like the host is seeing the request coming from VPS1 on br1. But for some reason, it does not forward it to br2. Instead it is asking where the destination IP is through ipv6 multicast. Anyone has a clue what is going on? I find this very strange, as it is working fine with ipv4 with the exact same settings and routes.

    Read the article

  • Local Network - Windows 7 and Vista can't see each other

    - by ca8msm
    I've got a strange issue at home that has been bugging me for weeks, but I really need to get it sorted now so I'll detail as much as I can and hopefully someone can spot what might might be wrong. I have a wireless router connected to the internet and 3 devices connected to it. They are: Name OS Network IPv4 PC1 Windows 7 WORKGROUP 192.168.2.2 LAPTOP1 Vista WORKGROUP 192.168.2.3 PS3 192.168.2.4 and they all get their IP addresses dynamically. Both PC1 and LAPTOP1 can ping PS3 and get a response. PC1 and LAPTOP1 are unable to ping each other by ip address unless I ping by their name (which bizarrely shows that it is pinging via the IPv6 address). Also, to confirm this both PC1 and LAPTOP1 can ping each other via the long IPv6 address that they both have so they can obviously see each other just not via IPv4. I've disabled the firewalls on both machines as well to rule that out. I don't really know what IPv6 is used for and I've tried disabling it on both machines but all that happens then is that neither machine can see each other at all then. Does anyone have any idea of what may be stopping them seeing each other, any ways I can look at fixing this, or any network tools that may help identify where it is failing? Thanks, Mark

    Read the article

  • Onboard Ethernet suddenly stopped working to router

    - by AfterschoolHobbist
    Hey guys, yesterday I have a sudden problem of my Ethernet connection to my router. My computer is a Pendium 4 with Window XP SP3 running on it and it was working fine earlier in the day, but yesterday night was the start of the problem. My computer is unable to ping to the router and to any other website and unable to get internet connection. As beside it was connected to a hub, I directly connected it to the router directly and the same problem occurred, being unable to ping to the router (and connecting to it) and still no internet access. My directly connected to the modem and the problem still persisted. For each connection, I connected it to my computer and my laptop and my laptop was able to connect, while my desktop computer was unable. I wondered if it was a OS issue and ran a live Ubuntu CD to see if Ubuntu was able to connect to the internet, but the issue persisted and I was unable to get internet access. I then set my router's lease time to 1 hour and waited. After 1 hour, the lease for my computer was removed and I hoped this worked, but it didn't work, but something strange is acting up. My desktop computer is still unable to ping to the router or connect to the internet, but for some reason, my router and desktop computer is still able to contact each other by providing a lease of an local ip address. The router record of a lease to my desktop computer, and when I do ipconfig, my desktop also recognize that it has been provided a local ip address. I have concluded that this is a hardware issue and the only solution to fix this is to by a network card adapter, but I am wondering if anyone has any solutions that could explain why this happen, why my mac address is 01-23-45-67-89-ab, and is there any way to fix it without buying a new network card? Thanks in advance.

    Read the article

< Previous Page | 215 216 217 218 219 220 221 222 223 224 225 226  | Next Page >