Search Results

Search found 7374 results on 295 pages for 'strange behaviour'.

Page 221/295 | < Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >

• Google MAIL not arriving - relay not allowed

  - by renevdkooi

  I have a server with sendmail, hosting my domain mind-zone.nl, i changed the MX records to point to the server. When I use Hotmail or any other client the email arrives and everything is fine. ONLY mail from GMAIL server is bounced and gmail returns "relay denied". I have set all the virtual server host settings etc, from command line I can send mails as well, hotmail works, etc. Just not gmail. The strange thing is, this is what gmail returns: Look at the lower part: "Received by" it returns some IP address which is not mine and has absolutely nothing with my domain. While when I do a NSLOOKUP and change to google's DNS server it will state that the IP Address for my domain is correctly pointing at my server. Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1: Relay access denied (state 14). ----- Original message ----- MIME-Version: 1.0 Received: by 10.14.37.138 with SMTP id y10mr3421504eea.43.1297665573901; Sun, 13 Feb 2011 22:39:33 -0800 (PST) Received: by 10.14.29.75 with HTTP; Sun, 13 Feb 2011 22:39:33 -0800 (PST)

  Read the article

• CentOS server. What does it mean when the total used RAM does not equal the sum of RES?

  - by Michael Green

  I'm having a problem with a virtual hosted server running CentOS. In the past month a process (java based) that had been running fine started having problems getting memory when the JVM was started. One strange thing I've noticed is that when I start the process, the PID says it is using 470mb of RAM while the 'used' memory immediately drops by over a 1GB. If I run 'top', the total RES used across all processes falls short of the 'used' listed at the top by almost 700mb. The support person says this means I have a memory leak with my process. I don't know what to believe because I would expect a memory leak to simply waste the memory the process is allocated not to consume additional memory that doesn't show up using 'top'. I'm a developer and not a server guy so I'm appealing to the experts. To me, if the total RES memory doesn't add up to the total 'used' it indicates that something is wrong with my virtual server set-up. Would you also suspect a memory leaking java process in this case? If I use free before: total used free shared buffers cached Mem: 2097152 149264 1947888 0 0 0 -/+ buffers/cache: 149264 1947888 Swap: 0 0 0 free after: total used free shared buffers cached Mem: 2097152 1094116 1003036 0 0 0 -/+ buffers/cache: 1094116 1003036 Swap: 0 0 0 So it looks as though the process is using (or causing to be used) nearly 1GB of RAM. Since the process (based on top is only using 452mb, does that mean that the kernal is all of a sudden using an additional 500mb?

  Read the article

• Problem with Amiga 1200 accelerator board

  - by cc0

  I just recently walked past a dump, where in the corner of my eye I spotted something that looked like a huge keyboard. I went to take a closer look, and found out that it was an Amiga 1200 with a 030 accellerator board and scala dongle. Jackpot! So anyway; I dried it, cleaned it, it works, but the floppy was not powering on and same with the harddrive. I am using an old Amiga 1200 PSU that was making some strange high pitch noise when I tried to boot the amiga with the harddrive installed in it. I removed the harddrive and it booted fine with the PSU not emitting any detectable noise. However, when I have the 030 installed it sometimes reboots and shows a red "Software Error" screen. I tried removing the memory on the board, same effect. Sometimes it does not boot at all, just gives a black screen. Someone suggested the card had problems with 3.1 roms, but this amiga has only 3.0 roms installed. Does anyone have any apparent theories as to why it seems unstable? I don't have any other Amiga parts to cross-swap with to test a lot of things, so I'd really appreciate some sound input here so I'd know what to look for in order to try fix it. And merry Christmas everyone :]

  Read the article

• Mercurial confusion - commit / push, backouts

  - by Madmanguruman

  I'm trying to set up a repository on a shared filesystem. I'm using Mercurial 2.1.2 on a Windows-based architecture. I start with an empty folder on the shared filesystem and create a repository in it. After this, I dump in the baseline files, and add them to versioning, then commit the changes. I then clone the repository to my local hard drive. I then make a change in my local repository, commit it, then push back to the shared filesystem repository. The shared repo graph I get in TortoiseHG looks strange (to me). This is the shared repo: This is the local repo: On the shared repo, the working directory always shows up on the top, then the graph goes 'down' to rev. 0 then back 'up' again through various revisions. It looks to me like I have two different branches, even though everything is on the default branch. Also, that 'top' revision always says "* Working Directory * Not a head revision!" I noticed that in my local repository, I don't get that dangling working directory at the top of the list - everything is in one branch. I also noticed that on my local repository, I can back out the tip revision with no problem. On the shared filesystem repository, I cannot, since I get an error ("Cannot backout change on a different branch"). How can this be? Aren't they supposed to be identical to each other? Am I fundamentally doing something wrong?

  Read the article

• How do I know if I managed to completely remove an undetected trojan?

  - by ubuntuisbetter

  I catched a trojan that uses explorer.exe to reproduce itself in case of deletion of its autostart entry or main exe file in Programs/x. It had already tried to contact a suspicious server over explorer.exe, blocked that via my firewall. I: Removed the autostart entries from the registry Looked through my services if there was anything suspicious Deleted the trojan from Programs/ Went through System Volume Information to find a 2 month old explorer.exe and replaced the possibly infected one. There are no suspicious processes running now anymore (no duplicate explorer.exe) and nothing wants to connect this trojan owners sever either. I checked my system with several anti-malware programs too. What the trojan did: Started a second explorer.exe Always when I deleted the main trojan exe file it was reproduced (by the second explorer.exe) Always when I deleted the autostart entry it was reproduced by the explorer.exe too. When I terminated the suspicious explorer.exe, which used only half as much memory as the less suspicious one from Windows, a strange thing that I know from the computers in my Informatics class happened: A window popped up in the top left of my explorer-less desktop, titled "Personal settings for ... are ..." that obviously copied some files. Then both explorer.exes started again and the trojan was everywhere again. What did the trojan actually do to get explorer to rescue it? Is my PC clean of this newish trojan now? What are the other locations I should check for the trojan? The trjoan doesn't seem very high-level, could it have changed other system files or is the autostart entry vital for it? Thanks in advance, Your trojan paranoid friend (Getting linux in a week)

  Read the article

• Truecrypt and hidden volumes

  - by user51166

  I would like to know the opinion of some users using (or not) the hidden volume encryption feature of Truecrypt. Personally until now I never used this feature: on Windows I encrypt the system drive as a standard volume, on GNU/Linux I encrypt using LUKS which is Truecrypt's equivalent to standard volume. As for data I use the standard volume approach as well. I read that this feature is nice and all, but it isn't really used by most people. Do you use it or not? Why? Do you only store inside it VERY sensible data or what else? Because technically speaking doing a hidden volume which has (almost) the same size as the outer one doesn't make sense: the outer volume will be encrypted but no data will be on it, which will appear very strange. So not only one has to plan which data store where, but has even to remember each time to mount the outer volume with hidden volume protection (otherwise there'll be a data loss when writing to it). It's a bit messy: hidden OS + outer OS + outer volume + hidden volume = 4 partitions :( Similar question about the hidden operating system (which I don't use [yet]).

  Read the article

• Computer turns on and off very quickly, then nothing, then works?

  - by hellohellosharp

  The strange nature of this problem is what is stumping me. I built my computer about 7 months ago using all new parts off of Newegg (not a kit or anything). One day, I wake up and turn on my computer. I press the power button and it turns on, but then back off after half a second. I press the power button again, this time nothing. I continue pressing the power button while at the same time turning the power supply on and off (to try and reset things). The power button still does nothing. But then, after about 5 minutes, WALLAH, it works just fine like nothing was ever wrong. It goes for an entire week working just fine. Then, one morning, the entire process starts again. I press the power button and it comes on and then right back off. I press the power button several times and nothing happens, and then it works again after a couple minutes of trying. What is going on with my computer?

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• Laptop does not charge old or new battery with Old and New AC adapters.

  - by Jeff

  My Sager computer has been having a strange issue with the charging. For a long time it would be working perfectly as long as I was active on it. After I'd leave idle for a while it would suddenly decide it didn't want to use AC power anymore and would just discharge the battery until it shutdown because of low battery levels. Was not a huge deal to me since I just sent it to standby when done with it and it worked fine. Recently, however, it would not detect AC power while the battery was in. It ran from the battery just fine but until you powered it down, unplugged the battery, then plugged in the AC adapter it would not be on AC. In addition if I plug the battery back in after it's on AC power, it will see it but the battery won't charge though it can still discharge it. This is OS independent. I tried both a replacement battery and a replacement AC adapter. Neither solved my issue. I'm fairly comfortable opening and servicing a laptop but I don't know where to start. I'd like to avoid replacing my system board if possible. Any Ideas?

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• disable mystery programs running at startup

  - by pstanton

  Hi and sorry for the ambiguous title... I have a few programs that should run at startup which are 'properly' configured to do so via adding shortcuts to the startup directory: C:\Users\[me]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup However I have (at least) 4 programs which are also starting up, which I can't find where they are configured or how to disable them. I have tried to find them in the above folder, as well as in the 'startup' section of 'msconfig'. The programs include: Skype (for which I have disabled 'start when windows starts' in its options) Thunderbird (for which I cannot find any option to run-at-startup) Task manager (as above) and some anonymous call to javaw (can't find any more details but it fails anyway) The other strange thing is that it seems like these (at least skype and thunderbird) are running 'as administrator' ... i have deduced this because I am unable to use the file-drag-and-drop feature in both (which is a known problem when running 'as administrator'). If someone could guide me to where these extra programs are configured to run-at-startup I would be very greatful! ps. my user account has the administrator role. EDIT: preferrably without another 3rd party tool...

  Read the article

• Two cisco gigabit switches refuse to link to each other. Any idea why?

  - by Prody

  I have 3 Linksys SR2024 switches which are basically non-managed 24 port Gbit + 2 miniGBIC. I now had to add another switch to the network, and my provider didn't have the SR2024 switch anymore, so I got the Cisco SLM2024 which was a bit more expensive. It's pretty much the same thing but with management (that I don't need). So I've connected the SLM2024 to a SR2024 via Cat6 cable, and for some strange reason, I get no link. If I connect any machine with a Gbit NIC to both switches, it links with 1Gbit autonegotiated. If I connect the SLM2024 to a non-Gbit switch (I have a cheap 4port ASUS switch), it will link just fine on 100Mbit full duplex. Since the SLM2024 has management, I've tried to see if something is misconfigured on it's side, but it's not, it advertises 1Gbit and lower. (hence the machines connecting succesfully at 1Gbit). Since the SR2024 that I'm trying to connect it to also connects successfully with another SR2024 and other Gbit machines, it means that it advertises Gbit too. But for some reason when I link the SR2024 to the SLM2024 I get no link. Please note that I've properly tested the wire. Does anyone have any idea what's wrong?

  Read the article

• Computer will freeze/ lock up after doing relatively stressful things

  - by GrowingCode247

  I'll first start off by saying that the issue GENERALLY doesn't occur unless I'm doing something remotely stressful for my computer. This issue used to occur whenever it felt it was necessary, however has not occurred completely randomly for a while now (thankfully) My computer's specs: CPU: AMD Phenom II X4 960T GPU: GeForce GTX 760 Memory: 16 GB RAM Resolution Used: 1680x1050, 59Hz (strange number for refresh rate?) res is highest for monitor Nvidia Driver version: 331.65 OS: Microsoft Windows 7 Ultimate (64-bit) Sometimes I will be able to go 2-3 games (about an hour, depending) and sometimes it will go maybe one game (20-30 minutes) and then my computer will run sluggishly and leave me unable to do much of anything. I can sometimes interact with programs at a very basic level (maximizing, minimizing), and I usually cannot close them in any way, not even through Task Manager. The highest temperature my GPU reaches is 76C, with the average being around 73C. During the time the temperatures are around 73C, my GPU's RAM usage is anywhere between 1250-1300 (out of 2GB). My CPU's temperature never goes over 60C, thankfully. The PSU should be fine. It's very mildly dusty but I feel as though that would not be causing this problem... I will clean it out as soon as everything else has been ruled out. Honestly I have no clue how to test the PSU for problems - same goes for my Motherboard. I cannot really think of what could be causing these freezes otherwise. Event Viewer details: EventID: 1 - VDS Basic Provider (I've no clue what this is) EventID: 3 - Kernel-EventTracing (Again, lost) EventID: 8003 - bowser (this seems fishy) and the one critical that I know others have been dealing with as I've browsed some other responses on the web: EventID: 41 - Kernel-Power any help to solve this problem would be GREATLY appreciated.

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• Windows 7 Account Settings Vanished

  - by Roy Tang

  So I came home and stumbled upon a bit of a mystery. When I got home my brother was using my desktop PC that was running Windows 7 (I have accounts for my 2 brothers and my mom on the machine, but mine is the only admin account). After he finished his game he logged out and I logged in to my account, but found only strangeness. My windows account seems to have been somewhat "reset", meaning: my quick launch shortcuts were gone my dropbox account did not automatically login my pidgin accounts were no longer there I had to relogin Steam iTunes could not launch (I had hooked up my iDevice before logging in) The Documents/Pictures/Music shortcuts in the start menu no longer work However, despite that: my desktop wallpaper was still correct my documents folder was still there in c:\Users\my account name\My Documents as expected Google Chrome settings seem to have been retained other accounts on the same machine seem to be fine I asked my brother if he had installed anything strange during the day, he only installed Yahoo Messenger. I last used the machine around 24 hours ago and it was fine then. I'm not sure what else has been affected. I'm inclined to just create a new admin user for me to use, but I'd like to have some idea of what actually happened.

  Read the article

• MySQL has stopped accepting connections from other users than root

  - by John

  Hi there. I'm running a mysql-server a long with apache and tomcat on a Gentoo box. To administer mysql I'm using phpMyAdmin. A couple of hours ago I received a call -- a user was unable to login to phpmyadmin. I logged on to phpmyadmin with the root user, and reset the password. The user was still not able to login. I then decided to give it a go myself, and even I wasn't able to login. I tried creating several user accounts, none of them were able to access mysql via jdbc/mysql-client/phpmyadmin. The only user that seems to work is root. What's even more strange is that websites that connect to mysql with a user other than root are still able to login and retrieve content from the database (it's mainly wordpress and a tomcat webapp). I have made sure it's not just cached, I was able to post SQL queries to the database via these web apps still. However, I am unable to login to phpmyadmin/mysql-client with this user and I am also unable to set up a connection with this user for any new web-applications. Any help is immensely appreciated.

  Read the article

• Summer daylight time not changing on some active directory domain clients.

  - by Nick Gorbikoff

  We just had a summer daylight change in US. and pc's on my network are behaving strange, some of them change time and some didn't. My network: 2 locations both in Midwest, same time zone. Location 1: 120 pcs (windows xp & windows 200) , with 1 Active Direcotry Domain Controller on Windows 2003 Standard. A couple of windows 2000 servers (they up to date) the rest of the servers are Xen or Debian machines (all up to date) , Second location connected through OpenVPN link all pc's are running fine - but they are all connecting to our AD domain controller. Locaiton 2: 10 pcs, and a shared LAN NAS. Both of the routers/firewalls in both locations are pFsense boxes with ntp service running - but it's up to date. Tried all the usual suspects: I have all the latest updates installed restarted them domain controller is running fine most computers are running fine I have only one domain controller on my network also my firewall serves as ntp server (pfsense) but it's up to date. all of the linux machines are fine since they are querying firewall / router for the time. about 1/3 of my pcs are 1 hour behind. If I change them manually they just change back ( the way domain pc's are supposed to). I've tried everything but I can't think of anything else to try.

  Read the article

• File Acces\Rename Issue

  - by Moon .

  Guys, i am having serious problem with media files (only video files). When i try to rename or delete a Files or the Folders that contained media files, i get an error. "Access Denied .... Some other program might be using this file..... bla bla bla" Previously for this knida problem i had a freeware "Unlocker" that used to work. What "Unlocker" used to do was simply kill the process that is using the file. But in my case, now that is, the process using the files is "Explorer.exe" W.T.F... A strange behavior, when i copy paste the same file. The copied file, I can rename it, i can delete it, i can shit on it if i want to.... but what is wrong with the original file. Check the following list. It will give you a better idea of my situation. I am using Win XP SP 2 I have got Div Player installed (latest) The media files are from both, my hard drive, created by many of my previous window installations. And new downloaded files. So Files ownership or Privacy is not an issue. I may not be able to rename\delete those files one moment, the next moment, in the next try, i might succeed. The problem is a major F. i can't figure it out. Please F1! its getting on my nerves.

  Read the article

• Toshiba Satellite C665 Rebooting from Standby

  - by Coodu

  I currently am working on a C665 with a strange issue. When the panel is closed the notebook will put itself to sleep in the usual way, and the power LED changes to the pulse to indicate that the device is asleep. However, when the panel is opened to resume using the notebook, the system will restart itself, instead beginning from the Toshiba logo and proceed to boot back in to W7. I should also note that each time this occurs, the "Windows Startup Recovery" option occurs, indicating that the system was not shut down correctly. Some things I have tried: Updated to latest Toshiba BIOS. Returned BIOS settings to their defaults. Swapped Memory to known good module, tested KGM in both memory slots within system. Confirmed that power settings are set to sleep/wake when power button is pressed. Ran a quick HDD fitness test using a parted magic USB stick. Checked for BSOD logs using BlueScreenView, none found. Ran src, no violations found. Any ideas? I have a good feeling the system is restarting itself, but in the event viewer there is a "Kernel Power" error, but it simply says "The system was not shut down correctly." Perhaps a bad driver? I'm not sure. Any advice would be great.

  Read the article

• Nvidia 9800GT randomly prevents computer from booting

  - by Blender

  My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

  Read the article

• Can't access apache from outsite my local network

  - by valter

  UPDATED: Now, when I type my external ip like xxx.xxx.xxx.xxx:8079, i can access xampp defaults page. But the strange is that when someone else from outside my network, try to access it using the same ip, it doesnt work. I Think it should, because its the external ip. I'm getting crazy. I have tried for hours to access xampp defaults page from outside my local network. My ISP blocks port 80 and 8080. So I changed apache to listen to port 8079 Listen 8079 My local computer ip is 10.1.1.2 I can access the webserver, from any computer on my local network when I type http://10.1.1.2:8079 I also oppended the port 8079 on my modem, as the image shows bellow. (I think i did it right) When apache is running on my computer, if I test the port 8079 at http://canyouseeme.org/ i get the message "Success: I can see your service on xxx.xxx.xxx.xxx on port (8079) Your ISP is not blocking port 8079" If apache is not running I get "Error: I could not see your service on xxx.xxx.xxx.xxx on port (8079) Reason: Connection refused". So, it's clear that the port 8079 is oppened. But when I type xxx.xxx.xxx.xxx:8079 on google chrome for example, I get Oops! Google Chrome could not connect to xxx.xxx.xxx.xxx:8079 What can I do to solve this, to allow apache to server the pages? I don't know what else I shoud configure. Please, help me. Thanks.

  Read the article

• Adding user groups from a remote domain server to permissions of a remote desktop terminal server fails. why?

  - by doveyg

  I have 3 computers, two of which are servers running Windows Server 2008 and another running Windows 7. One of the servers has the following roles installed; Active Directory, DHCP and DNS. The other server has a Terminal Server role installed. I am trying to log-on to the Terminal Server via Remote Desktop using the Windows 7 machine with credentials from the Active Directory server. Sounds simple enough, right? Well, no. Whenever I try to add users or groups from the Active Directory Domain server to the Terminal Server's permissions for RDP it seems to ignore, or forget, them. Though the various methods I was able to find it either adds a strange sting of numbers after the user group or the logo to the left has a question mark on it, reopening the dialogue box replaces the user group with the name of the Domain. I am confident I have the Domain setup correctly as I am able to log-on to users in the Active Directory from other computers I have put in the Domain, and when I attempt to browse the user objects from the Domain I am prompted with a username/password field and am able to view the structure of Active Directory objects. Please advise.

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Some websites hosted on my server cant be reached from some places.

  - by valter

  Hello. I have a bloblem that is causing me headaches to solve. I have a webserver at 100tb.com, running CentOS. I also have these nameservers setted up: 67.213.220.170 ns1.maisturismo.net 67.213.220.171 ns2.maisturismo.net My domain is at Godaddy. I added two Host Summary pointig to the nameserver ips... NS1 to the first IP, and NS2 to the second... Than I changed the nameservers of maisturismo.net to ns1.maisturismo.net and ns2.maisturismo.net http://img20.imageshack.us/i/dnswm.jpg/ Bellow the image showing my dns records to maisturismo.net http://img137.imageshack.us/i/nameservers.jpg/ Its strange... Everythink looks fine, but the webiste is not reachable from [zend2.com][1] proxy, and from some other places, like a friend's house, that dont use the same web provider that I use. I have another nameserver setted up on my server, that have the same problem, All websites that use it cant be reached from zend2.com and from my friends house, except a ".com.br"(Brazillian Domain). Do you have same idea about, what is causing this? I really cant imagine what is the problem... Thanks. [1]: http:// zend2.com

  Read the article

• Howto detect fake RAM

  - by Michael

  I just bought a virtual server which should have 2GB of RAM. Now i got a server with 4gb which looks very strange to me. I think it is just a virtual RAM. dmidecode only ouputs /dev/mem: Operation not permitted How can i check if it's a real RAM or just a virtual one? free -m outputs: total used free shared buffers cached Mem: 4093 364 3728 0 0 346 -/+ buffers/cache: 18 4074 Swap: 0 0 0 Output from cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 137: kmemsize 8922287 10194944 2145910784 2145910784 0 lockedpages 0 0 523904 523904 0 privvmpages 13387 59112 9223372036854775807 9223372036854775807 0 shmpages 769 785 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numproc 22 54 9223372036854775807 9223372036854775807 0 physpages 93377 106010 0 1047808 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 2471 2473 9223372036854775807 9223372036854775807 0 numtcpsock 5 21 9223372036854775807 9223372036854775807 0 numflock 4 13 9223372036854775807 9223372036854775807 0 numpty 1 1 9223372036854775807 9223372036854775807 0 numsiginfo 0 39 9223372036854775807 9223372036854775807 0 tcpsndbuf 102592 381632 9223372036854775807 9223372036854775807 0 tcprcvbuf 81920 4820184 9223372036854775807 9223372036854775807 0 othersockbuf 4624 61632 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 9248 9223372036854775807 9223372036854775807 0 numothersock 39 56 9223372036854775807 9223372036854775807 0 dcachesize 4178917 4232732 1072955392 1072955392 0 numfile 378 535 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numiptent 24 24 9223372036854775807 9223372036854775807 0

  Read the article

< Previous Page | 217 218 219 220 221 222 223 224 225 226 227 228  | Next Page >