Search Results

Search found 607 results on 25 pages for 'adapters'.

Page 22/25 | < Previous Page | 18 19 20 21 22 23 24 25  | Next Page >

• How to make Windows 7 use the internet connection that I specify

  - by user138957

  I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• How To Configure Remote Desktop To Hyper-V Guest Virtual Machines

  - by Brian Jackett

  Configuring Remote Desktop (RDP) from a host Hyper-V machine to a guest virtual machine can be tricky, so this post is dedicated to the issues and resolution steps I went through to allow RDP.  Cutting to the point, below are the things to look for followed by some explanation about my scenario if you care to read.  This is not an exhaustive list of what is required, just the items that were causing problems for my particular scenario. Requirements Allow Remote Desktop Connections in guest OS. The network adapter type must allow communication with host machine (e.g. use an “Internal” virtual adapter.) If running Server 2008 R2 on guest, network discovery mode must be turned on. If running Server 2008 R2 on guest, the services supporting network discovery mode must be running: - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host My Environment     A quick word about my environment.  I am running Windows Server 2008 R2 with Hyper V on my laptop and numerous guest VMs running Windows Server 2003 R2 or Windows Server 2008 R2.  I run a domain controller VM and then 1 or 2 SharePoint servers depending on my work needs.  I’ve found this setup to work well except when it comes to the display window for my VMs. The Issue     Ever since I began running Hyper-V I haven’t been able to RDP to my guest VMs which means the resolution for my connection windows ha been limited to what the native Hyper-V connections allow.  During personal use I can put the resolution up to 1152 x 864, but during presentations I am usually limited to a measly 800 x 600.  That is until today when I decided to fully investigate why I couldn’t connect via RDP.     First a thank you to John Ross (@johnrossjr), Christina Wheeler (@cwheeler76) and Clayton Cobb (@warrtalon) for various suggestions while I was researching tonight.  As it turns out I had not 1, not 2, but 3 items preventing me from using RDP.  Let’s dig into the requirements above. Allow RDP Connection     This item I had previously taken care of, but it bears repeating because by default Windows Server 2008 R2 does not allow RDP connections.  Change the setting from “Don’t allow…” to whichever “Allow connections…” setting suits your needs.  I chose the less secure option as this is just my dev laptop. Network Adapter Type     When I originally configured my VMs I configured each to use 2 network adapters: one using the physical ethernet adapter for internet use and a virtual private adapter for communication between the VMs.  The connection for the ethernet adapter is an "”External” adapter and thus doesn’t connect between the host and guest.  The virtual private adapter allowed communication ONLY between the VMs and not to my host.  There is a third option “Internal” which allows communication between VMs as well as to the host.  After finding out this distinction I promptly created an Internal network adapter and assigned that to my VMs. Turn On Network Discovery     Seems like a pretty common sense thing, but in order to allow remote desktop connections the target computer must able to be found by the source computer (explained here.)  One of the settings that controls if a computer can be found on the network is aptly named Network Discovery.  By default Windows Server 2008 R2 turns Network Discovery off for security purposes.  To enable it open up the Network and Sharing Center.  Click “Change Advanced Sharing Settings” on the left.  On the following screen select “Turn on network discovery” for the currently used profile and click Save Settings.  You may notice though that your selection to turn on network discovery doesn’t save.  If this is the case then you most likely don’t have the supporting services running (as was my case.) Network Discovery Supporting Services     There are a total of 4 services (listed again below) that need to be running before you can turn on network discovery (explained here.)  The below images highlight these services.  In my guest VM I found that I had DNS Client already running while the other 3 were disabled.  I set them all to enabled and started the ones that were stopped.  After this change I returned to the Sharing settings screen and found that Network Discovery was turned on.  I’m not sure whether this was picking up my attempt to turn it on previously or if starting those services turned it on.  Either way the end result was a success. - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host Before and After Results     The first image is the smaller square shaped viewing window used by the Hyper-V native connection.  The second is the full-screen RDP connection in all its widescreen glory. Conclusion     Over the past few months I’ve found Hyper-V to be very useful for virtualizing my development environments, but I’ve also had a steep learning curve to get various items configured just right.  Allowing RDP connections to guest VMs was one area that I hadn’t been able to get right for the longest time.  Now that I resolved these issues I hope that others can avoid the pitfalls that I ran into.  If you know of any other items I left off feel free to let me know.        -Frog Out   Links Turning on Network Discovery http://sqlblog.com/blogs/john_paul_cook/archive/2009/08/15/remote-desktop-connection-on-windows-server-2008-r2.aspx Services required for Network Discovery http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2e1fea01-3f2b-4c46-a631-a8db34ed4f84

  Read the article

• Information Indepth Newsletter - Linux Edition

  - by Paulo Folgado

  INFORMATION INDEPTH NEWSLETTERLinux Edition February 2011 Stay Connected:  NEWS Now Available: Oracle Linux 6 Get the latest release of Oracle Linux 6, which includes Unbreakable Enterprise Kernel.Download Oracle Linux 6 Read More Customers Succeed by Using Oracle Exadata with Oracle Linux Watch IT executives from Bank of America, Linkshare, and Johns Hopkins as they talk about the business challenges they faced and why they chose to use Oracle Linux along with Oracle Exadata as the solution. Watch Now Video Interview: Oracle Senior Vice President Wim Coekaerts Watch Wim Coekaerts, senior vice president, Linux and Virtualization Engineering, as he talks about use cases for Oracle VM Templates as well as the Unbreakable Enterprise Kernel for Linux.Watch Now Hot Off the Press: Migrate Your IBM AIX Environment to Oracle Linux This new white paper provides recommendations for planning and implementing the migration of applications from an IBM Power System running AIX to Oracle's Sun Fire X4800 Server with Intel Xeon 7560 Processor running Oracle Linux 5.5.Read More  Back to Top BLOGOSPHERE Just Launched: The Oracle Linux Blog Follow our new Oracle Linux blog  to hear the latest updates, product news, upcoming events, and all the latest happenings, directly from the Linux team at Oracle. Back to Top TECH DIVE NEW: Linux/Oracle Solaris CommandComparo Site from Oracle Technology NetworkThis site gives equivalent command syntax in Oracle Solaris 10 and Oracle Enterprise Linux 5 for common administrative tasks--focusing particularly on tasks that have tricky syntax or that you frequently need to double check. It acts as a quick reference for administrators who operate in these two OS environments. Free Download: Oracle Linux Release 5.6Did you know that by using Oracle Linux 5.5 or 5.6 along with the Unbreakable Enterprise Kernel, you can get all the benefits of Linux mainline kernel 2.6.32 and more, right now, without the need to reinstall or migrate to a new operating system such as RHEL6?Read Release NotesDownload Oracle Linux 5.6 LSB 4.0 Certification Completed for Oracle Linux 5.5Oracle Linux 5.5 with Unbreakable Enterprise Kernel successfully completed the LSB 4.0 certification.  Back to Top WEBCASTS Boost Your Linux Performance with Oracle's Enhancements in Infiniband and RDSRegister to hear Director of Kernel Engineering Chris Mason cover scalability and performance improvements in Linux environment. Get the Facts Oracle's Unbreakable Enterprise KernelSVP Wim Coekaerts and Senior Director Monica Kumar cover the facts about and benefits of using Unbreakable Enterprise Kernel.  View Other Webcasts on Demand   Back to Top EVENTS Collaborate 2011April 10-14 Orlando, Florida Cloud Summit Events, WorldwideVarious dates (check the city for date/time of event) Datacenter Efficiency Events WorldwideThese events include Linux and Oracle VM sessions.Various dates (check the city for date/time of event) Virtualization Events in North America Find an Oracle Event  Back to Top EDUCATION Get Oracle Linux Certified from Oracle University Oracle University offers courses in both Oracle Linux and the administration of Oracle Database on Linux.  Back to Top CUSTOMER SPOTLIGHT Pella Corporation Improves IT Performance and Efficiency with Oracle Linux and Oracle VM To improve IT performance and efficiency and lower operational costs, Pella Corporation, has standardized on Oracle VM and Oracle Linux. Read More Disney Store Deploys POS in 330 Stores and 7 Countries on Oracle Linux Disney Store is running 1,500 registers worldwide on a broad Oracle technology software stack including Oracle Database 11g, Oracle Fusion Middleware, and Oracle Linux. Read More Back to Top PARTNER SPOTLIGHT Emulex and Oracle Announce Data Integrity Features The Unbreakable Enterprise Kernel provides data integrity checking between Oracle Database applications and Emulex 8Gb/s LightPulse Fibre Channel Host Bus Adapters. Read More Dell Inc. Dell Inc. tested and validated configurations support Oracle Linux. Back to Top STAY IN TOUCH Follow @ORCL_Linux on Twitter for the latest penguin tweets Bookmark Oracle.com/Linux Read the Oracle Linux blog Back to Top  Oracle Information InDepth newsletters bring targeted news, articles, customer stories, and special offers to business people who want to find out how to streamline enterprise information management, measure results, improve business processes, and communicate a single truth to their constituents. Please send questions or comments to [email protected]. For answers to questions about subscribing, unsubscribing, and managing your Oracle e-mail communications preferences, please see the Oracle E-Mail Communications page. Copyright © 2011, Oracle Corporation and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. This document is provided for information purposes only, and the contents hereof are subject to change without notice. This document is not warranted to be error-free, nor is it subject to any other warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We specifically disclaim any liability with respect to this document, and no contractual obligations are formed either directly or indirectly by this document. This document may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without our prior written permission. 

  Read the article

• Whitepaper list for the application framework

  - by Rick Finley

  We're reposting the list of technical whitepapers for the Oracle ETPM framework (called OUAF, Oracle Utilities Application Framework).  These are are available from My Oracle Support at the Doc Id's mentioned below. Some have been updated in the last few months to reflect new advice and new features.  This is reposted from the OUAF blog:  http://blogs.oracle.com/theshortenspot/entry/whitepaper_list_as_at_november Doc Id Document Title Contents 559880.1 ConfigLab Design Guidelines This whitepaper outlines how to design and implement a data management solution using the ConfigLab facility. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management           560367.1 Technical Best Practices for Oracle Utilities Application Framework Based Products Whitepaper summarizing common technical best practices used by partners, implementation teams and customers. 560382.1 Performance Troubleshooting Guideline Series A set of whitepapers on tracking performance at each tier in the framework. The individual whitepapers are as follows: Concepts - General Concepts and Performance Troublehooting processes Client Troubleshooting - General troubleshooting of the browser client with common issues and resolutions. Network Troubleshooting - General troubleshooting of the network with common issues and resolutions. Web Application Server Troubleshooting - General troubleshooting of the Web Application Server with common issues and resolutions. Server Troubleshooting - General troubleshooting of the Operating system with common issues and resolutions. Database Troubleshooting - General troubleshooting of the database with common issues and resolutions. Batch Troubleshooting - General troubleshooting of the background processing component of the product with common issues and resolutions. 560401.1 Software Configuration Management Series  A set of whitepapers on how to manage customization (code and data) using the tools provided with the framework. The individual whitepapers are as follows: Concepts - General concepts and introduction. Environment Management - Principles and techniques for creating and managing environments. Version Management - Integration of Version control and version management of configuration items. Release Management - Packaging configuration items into a release. Distribution - Distribution and installation of releases across environments Change Management - Generic change management processes for product implementations. Status Accounting - Status reporting techniques using product facilities. Defect Management - Generic defect management processes for product implementations. Implementing Single Fixes - Discussion on the single fix architecture and how to use it in an implementation. Implementing Service Packs - Discussion on the service packs and how to use them in an implementation. Implementing Upgrades - Discussion on the the upgrade process and common techniques for minimizing the impact of upgrades. 773473.1 Oracle Utilities Application Framework Security Overview A whitepaper summarizing the security facilities in the framework. Now includes references to other Oracle security products supported. 774783.1 LDAP Integration for Oracle Utilities Application Framework based products Updated! A generic whitepaper summarizing how to integrate an external LDAP based security repository with the framework. 789060.1 Oracle Utilities Application Framework Integration Overview A whitepaper summarizing all the various common integration techniques used with the product (with case studies). 799912.1 Single Sign On Integration for Oracle Utilities Application Framework based products A whitepaper outlining a generic process for integrating an SSO product with the framework. 807068.1 Oracle Utilities Application Framework Architecture Guidelines This whitepaper outlines the different variations of architecture that can be considered. Each variation will include advice on configuration and other considerations. 836362.1 Batch Best Practices for Oracle Utilities Application Framework based products This whitepaper outlines the common and best practices implemented by sites all over the world. 856854.1 Technical Best Practices V1 Addendum Addendum to Technical Best Practices for Oracle Utilities Customer Care And Billing V1.x only. 942074.1 XAI Best Practices This whitepaper outlines the common integration tasks and best practices for the Web Services Integration provided by the Oracle Utilities Application Framework. 970785.1 Oracle Identity Manager Integration Overview This whitepaper outlines the principals of the prebuilt intergration between Oracle Utilities Application Framework Based Products and Oracle Identity Manager used to provision user and user group security information. For Fw4.x customers use whitepaper 1375600.1 instead. 1068958.1 Production Environment Configuration Guidelines A whitepaper outlining common production level settings for the products based upon benchmarks and customer feedback. 1177265.1 What's New In Oracle Utilities Application Framework V4? Whitepaper outlining the major changes to the framework since Oracle Utilities Application Framework V2.2. 1290700.1 Database Vault Integration Whitepaper outlining the Database Vault Integration solution provided with Oracle Utilities Application Framework V4.1.0 and above. 1299732.1 BI Publisher Guidelines for Oracle Utilities Application Framework Whitepaper outlining the interface between BI Publisher and the Oracle Utilities Application Framework 1308161.1 Oracle SOA Suite Integration with Oracle Utilities Application Framework based products This whitepaper outlines common design patterns and guidelines for using Oracle SOA Suite with Oracle Utilities Application Framework based products. 1308165.1 MPL Best Practices Oracle Utilities Application Framework This is a guidelines whitepaper for products shipping with the Multi-Purpose Listener. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 1308181.1 Oracle WebLogic JMS Integration with the Oracle Utilities Application Framework This whitepaper covers the native integration between Oracle WebLogic JMS with Oracle Utilities Application Framework using the new Message Driven Bean functionality and real time JMS adapters. 1334558.1 Oracle WebLogic Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using Oracle WebLogic for Oracle Utilities Application Framework based products. 1359369.1 IBM WebSphere Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using IBM WebSphere for Oracle Utilities Application Framework based products 1375600.1 Oracle Identity Management Suite Integration with the Oracle Utilities Application Framework New! This whitepaper covers the integration between Oracle Utilities Application Framework and Oracle Identity Management Suite components such as Oracle Identity Manager, Oracle Access Manager, Oracle Adaptive Access Manager, Oracle Internet Directory and Oracle Virtual Directory. 1375615.1 Advanced Security for the Oracle Utilities Application Framework New! This whitepaper covers common security requirements and how to meet those requirements using Oracle Utilities Application Framework native security facilities, security provided with the J2EE Web Application and/or facilities available in Oracle Identity Management Suite.

  Read the article

• Hello With Oracle Identity Manager Architecture

  - by mustafakaya

  Hi, my name is Mustafa! I'm a Senior Consultant in Fusion Middleware Team and living in Istanbul,Turkey. I worked many various Java based software development projects such as end-to-end web applications, CRM , Telco VAS and integration projects.I want to share my experiences and research about Fusion Middleware Products in this column. Customer always wants best solution from software consultants or developers. Solution will be a code snippet or change complete architecture. We faced different requests according to the case of customer. In my posts i want to discuss Fusion Middleware Products Architecture or how can extend usability with apis or UI customization and more and I look forward to engaging with you on your experiences and thoughts on this.  In my first post, i will be discussing Oracle Identity Manager architecture  and i plan to discuss Oracle Identity Manager 11g features in next posts. Oracle Identity Manager System Architecture Oracle Identity Governance includes Oracle Identity Manager,Oracle Identity Analytics and Oracle Privileged Account Manager. I will discuss Oracle Identity Manager architecture in this post.  In basically, Oracle Identity Manager is a n-tier standard  Java EE application that is deployed on Oracle WebLogic Server and uses  a database .  Oracle Identity Manager presentation tier has three different screen and two different client. Identity Self Service and Identity System Administration are web-based thin client. Design Console is a Java Swing Client that communicates directly with the Business Service Tier.  Identity Self Service provides end-user operations and delegated administration features. System Administration provides system administration functions. And Design Console mostly use for development management operations such as  create and manage adapter and process form,notification , workflow desing, reconciliation rules etc. Business service tier is implemented as an Enterprise JavaBeans(EJB) application. So you can extense Oracle Identity Manager capabilities.  -The SMPL and EJB APIs allow develop custom plug-ins such as management roles or identities.  -Identity Services allow use core business capabilites of Oracle Identity Manager such as The User provisioning or reconciliation service. -Integration Services allow develop custom connectors or adapters for various deployment needs. -Platform Services allow use Entitlement Servers, Scheduler or SOA composites. The Middleware tier allows you using capabilites ADF Faces,SOA Suites, Scheduler, Entitlement Server and BI Publisher Reports. So OIM allows you to configure workflows uses Oracle SOA Suite or define authorization policies use with Oracle Entitlement Server. Also you can customization of OIM UI without need to write code and using ADF Business Editor  you can extend custom attributes to user,role,catalog and other objects. Data tiers; Oracle Identity Manager is driven by data and metadata which provides flexibility and adaptability to Oracle Identity Manager functionlities.  -Database has five schemas these are OIM,SOA,MDS,OPSS and OES. Oracle Identity Manager uses database to store runtime and configuration data. And all of entity, transactional and audit datas are stored in database. -Metadata Store; customizations and personalizations are stored in file-based repository or database-based repository.And Oracle Identity Manager architecture,the metadata is in Oracle Identity Manager database to take advantage of some of the advanced performance and availability features that this mode provides. -Identity Store; Oracle Identity Manager provides the ability to integrate an LDAP-based identity store into Oracle Identity Manager architecture.  Oracle Identity Manager uses the human workflow module of Oracle Service Oriented Architecture Suite. OIM connects to SOA using the T3 URL which is front-end URL for the SOA server.Oracle Identity Manager uses embedded Oracle Entitlement Server for authorization checks in OIM engine.  Several Oracle Identity Manager modules use JMS queues. Each queue is processed by a separate Message Driven Bean (MDB), which is also part of the Oracle Identity Manager application. Message producers are also part of the Oracle Identity Manager application. Oracle Identity Manager uses a scheduled jobs for some activities in the background.Some of scheduled jobs come with Out-Of-Box such as the disable users after the end date of the users or you can define your custom schedule jobs with Oracle Identity Manager APIs. You can use Oracle BI Publisher for reporting Oracle Identity Manager transactions or audit data which are in database. About me: Mustafa Kaya is a Senior Consultant in Oracle Fusion Middleware Team, living in Istanbul. Before coming to Oracle, he worked in teams developing web applications and backend services at a telco company. He is a Java technology enthusiast, software engineer and addicted to learn new technologies,develop new ideas. Follow Mustafa on Twitter,Connect on LinkedIn, and visit his site for Oracle Fusion Middleware related tips.

  Read the article

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• Oracle Fusion Middleware 11g next launch phase - what a week of product releases! Feedback from our

  - by Jürgen Kress

    Product releases: SOA Suite 11gR1 Patch Set 2 (PS2) BPM Suite 11gR1 Released Oracle JDeveloper 11g (11.1.1.3.0) (Build 5660) Oracle WebLogic Server 11gR1 (10.3.3) Oracle JRockit (4.0) Oracle Tuxedo 11gR1 (11.1.1.1.0) Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86/x86-64 All Oracle Fusion Middleware 11gR1 Software Download   BPM Suite 11gR1 Released by Manoj Das Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0   SOA Suite 11gR1 Patch Set 2 (PS2) released by Demed L'Her We just released SOA Suite 11gR1 Patch Set 2 (PS2)! You can download it as usual from: OTN (main platforms only) eDelivery (all platforms) 11gR1 PS2 is delivered as a sparse installer, that is to say that it is meant to be applied on the latest full install (11gR1 PS1). That’s great for existing PS1 users who simply need to apply the patch and run the patch assistant – but an extra step for new users who will first need to download SOA Suite 11gR1 PS1 (in addition to the PS2 patch). What’s in that release? Bug fixes of course but also several significant new features. Here is a short selection of the most significant ones: Spring component (for native Java extensibility and integration) SOA Partitions (to organize and manage your composites) Direct Binding (for transactional invocations to and from Oracle Service Bus) HTTP binding (for those of you trying to do away with SOAP and looking for simple GET and POST) Resequencer (for ordering out-of-order messages) WS Atomic Transactions (WS-AT) support (for propagation of transactions across heterogeneous environments) Check out the complete list of new features in PS2 for more (including links to the documentation for the above)! But maybe even more importantly we are also releasing Oracle Service Bus 11gR1 and BPM Suite 11gR1 at the same time – all on the same base platform (WebLogic Server 10.3.3)! (NB: it might take a while for all pages and caches to be updated with the new content so if you don’t find what you need today, try again soon!)   Are you Systems Integrations and Independent Software Vendors ready to adopt and to deliver? Make sure that you become trained: Local training calendars Register for the SOA Partner Community & Webcast www.oracle.com/goto/emea/soa What is your feedback?  Who installed the software? please feel free to share your experience at http://twitter.com/soacommunity #soacommunity Technorati Tags: SOA partner community ACE Directoris SOA Suite PS2 BPM11g First feedback from our ACE Directors and key Partners:   Now, these are great times to start the journey into BPM! Hajo Normann Reuse of components across the Oracle 11G Fusion Middleware stack, BPM just is one of the components plugging into the stack and reuses all other components. Mr. Leon Smiers With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Guido Schmutz We have real BPMN 2.0, which get's executed. No more transformation from business models to executable models - just press the run button... Torsten Winterberg Oracle BPM Suite 11g brings Out-of-box integration with WebCenter Suite and Oracle ADF development framework. Andrejus Baranovskis With the release of BPM Suite 11g, Oracle has defined new standards for Business Process platforms. Geoffroy de Lamalle With User Messaging Service you can let Soa Suite 11g do all your Messaging Edwin Biemond

  Read the article

• Certify August Updates

  - by Sadia2

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We have added some release and platform certifications to MOS Certify. Applications : Oracle Demantra Demand Management 7.3.1.5, Oracle Demantra Predictive Trade Planning 7.3.1.5, Oracle Demantra Sales and Operations Planning 7.3.1.5 Database: Oracle Database Client 12.1.0.1.0 11.2.0.4.0, Oracle Clusterware 11.2.0.4.0, Oracle Database 11.2.0.4.0, Oracle Real Application Clusters 11.2.0.4.0 E-Business Suite: Oracle E-Business Suite 12.1.3, Oracle E-Business Suite 12.1.2, Oracle E-Business Suite 12.1.1, Oracle E-Business Suite 12.0.6, Oracle E-Business Suite 11.5.10.2 Edge Applications: Oracle Transportation Management 6.3.2 Enterprise Manager: Oracle Application Management Pack for Oracle E-Business Suite 12.1.0.1.0 Fusion Middleware: Discoverer Administrator 11.1.1.6.0, Discoverer Desktop 11.1.1.6.0, Forms Builder 11.1.1.6.0, Oracle Application Development Framework 11.1.1.6.0, Oracle Application Development Runtime 11.1.1.6.0, Oracle Business Intelligence Publisher 11.1.1.6.0, Oracle Directory Services Manager 11.1.1.6.0, Oracle Forms 11.1.1.6.0, Oracle GoldenGate 11.1.1.1.0, 11.1.1.1.2, 11.1.1.1.1, Oracle GoldenGate Application Adapters 11.1.1.1.1, Oracle Identity and Access Management 11.1.2.0.0, 11.1.2.1.0, Oracle Identity Federation 11.1.1.6.0, Oracle Real-Time Decision Load Generator 11.1.1.7.0, Oracle Real-Time Decision Studio 11.1.1.7.0, Oracle Real-Time Decisions 11.1.1.6.0, Oracle Reports 11.1.1.6.0, Oracle Segmentation Server 11.1.1.6.0, Oracle Virtual Directory 11.1.1.6.0, Oracle Web Cache 11.1.1.6.0, Oracle WebCenter Content Imaging 11.1.1.8.0, Oracle WebCenter Content Inbound Refinery Server 11.1.1.8.0, Oracle WebCenter Content Records 11.1.1.8.0, Oracle WebCenter Content Rights 11.1.1.8.0, Oracle WebCenter Content UI 11.1.1.8.0, Oracle WebCenter Enterprise Capture 11.1.1.8.0, Oracle WebCenter Portal 11.1.1.8.0, Oracle WebCenter Sites 11.1.1.8.0, Oracle WebCenter Sites: CIP for EMC Documentum 11.1.1.8.0, Oracle WebCenter Sites: CIP for File Systems and MS SharePoint 11.1.1.8.0, Oracle WebCenter Sites: Community-Gadgets 11.1.1.8.0, Oracle WebCenter Sites: Explorer 11.1.1.8.0, Oracle WebCenter Universal Content Management 11.1.1.8.0, Reports Builder 11.1.1.6.0, Oracle WebCenter Content Records 11.1.1.8.0, Oracle WebCenter Content Rights 11.1.1.8.0, Oracle WebCenter Content UI 11.1.1.8.0, Oracle WebCenter Sites: Developer Tools 11.1.1.8.0 FSGBU Insurance Group : Oracle Health Insurance Claims 2.13.3.0.0, 2.13.2.0.0, 2.13.1.0.0 JD Edwards EnterpriseOne: JD Edwards EnterpriseOne Tools 9.1.3.0, 9.1.2.0, 9.1.0.0 JD Edwards World: JD Edwards World Service Enablement A93SE, A931SE PeopleSoft: PeopleSoft PeopleTools 8.52 Siebel Enterprise: Siebel Application Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel CRM Desktop Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Database Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel HI Web Client 8.2.2.2.0, 8.1.1.9.0, Siebel Gateway Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Outlook Add-in Client 8.2.2.2.0, Siebel Remote Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Tools Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Web Server Extension 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Functional Adaptation

  - by Charles Courchaine

  In real life and OO programming we’re often faced with using adapters, DVI to VGA, 1/4” to 1/8” audio connections, 110V to 220V, wrapping an incompatible interface with a new one, and so on.  Where the adapter pattern is generally considered for interfaces and classes a similar technique can be applied to method signatures.  To be fair, this adaptation is generally used to reduce the number of parameters but I’m sure there are other clever possibilities to be had.  As Jan questioned in the last post, how can we use a common method to execute an action if the action has a differing number of parameters, going back to the greeting example it was suggested having an AddName method that takes a first and last name as parameters.  This is exactly what we’ll address in this post. Let’s set the stage with some review and some code changes.  First, our method that handles the setup/tear-down infrastructure for our WCF service: 1: private static TResult ExecuteGreetingFunc<TResult>(Func<IGreeting, TResult> theGreetingFunc) 2: { 3: IGreeting aGreetingService = null; 4: try 5: { 6: aGreetingService = GetGreetingChannel(); 7: return theGreetingFunc(aGreetingService); 8: } 9: finally 10: { 11: CloseWCFChannel((IChannel)aGreetingService); 12: } 13: } Our original AddName method: 1: private static string AddName(string theName) 2: { 3: return ExecuteGreetingFunc<string>(theGreetingService => theGreetingService.AddName(theName)); 4: } Our new AddName method: 1: private static int AddName(string firstName, string lastName) 2: { 3: return ExecuteGreetingFunc<int>(theGreetingService => theGreetingService.AddName(firstName, lastName)); 4: } Let’s change the AddName method, just a little bit more for this example and have it take the greeting service as a parameter. 1: private static int AddName(IGreeting greetingService, string firstName, string lastName) 2: { 3: return greetingService.AddName(firstName, lastName); 4: } The new signature of AddName using the Func delegate is now Func<IGreeting, string, string, int>, which can’t be used with ExecuteGreetingFunc as is because it expects Func<IGreeting, TResult>.  Somehow we have to eliminate the two string parameters before we can use this with our existing method.  This is where we need to adapt AddName to match what ExecuteGreetingFunc expects, and we’ll do so in the following progression. 1: Func<IGreeting, string, string, int> -> Func<IGreeting, string, int> 2: Func<IGreeting, string, int> -> Func<IGreeting, int>   For the first step, we’ll create a method using the lambda syntax that will “eliminate” the last name parameter: 1: string lastNameToAdd = "Smith"; 2: //Func<IGreeting, string, string, int> -> Func<IGreeting, string, int> 3: Func<IGreeting, string, int> addName = (greetingService, firstName) => AddName(greetingService, firstName, lastNameToAdd); The new addName method gets us one step close to the signature we need.  Let’s say we’re going to call this in a loop to add several names, we’ll take the final step from Func<IGreeting, string, int> -> Func<IGreeting, int> in line as a lambda passed to ExecuteGreetingFunc like so: 1: List<string> firstNames = new List<string>() { "Bob", "John" }; 2: int aID; 3: foreach (string firstName in firstNames) 4: { 5: //Func<IGreeting, string, int> -> Func<IGreeting, int> 6: aID = ExecuteGreetingFunc<int>(greetingService => addName(greetingService, firstName)); 7: Console.WriteLine(GetGreeting(aID)); 8: } If for some reason you needed to break out the lambda on line 6 you could replace it with 1: aID = ExecuteGreetingFunc<int>(ApplyAddName(addName, firstName)); and use this method: 1: private static Func<IGreeting, int> ApplyAddName(Func<IGreeting, string, int> addName, string lastName) 2: { 3: return greetingService => addName(greetingService, lastName); 4: } Splitting out a lambda into its own method is useful both in this style of coding as well as LINQ queries to improve the debugging experience.  It is not strictly necessary to break apart the steps & functions as was shown above; the lambda in line 6 (of the foreach example) could include both the last name and first name instead of being composed of two functions.  The process demonstrated above is one of partially applying functions, this could have also been done with Currying (also see Dustin Campbell’s excellent post on Currying for the canonical curried add example).  Matthew Podwysocki also has some good posts explaining both Currying and partial application and a follow up post that further clarifies the difference between Currying and partial application.  In either technique the ultimate goal is to reduce the number of parameters passed to a function.  Currying makes it a single parameter passed at each step, where partial application allows one to use multiple parameters at a time as we’ve done here.  This technique isn’t for everyone or every problem, but can be extremely handy when you need to adapt a call to something you don’t control.

  Read the article

• Infiniband: a highperformance network fabric - Part I

  - by Karoly Vegh

  Introduction:At the OpenWorld this year I managed to chat with interesting people again - one of them answering Infiniband deepdive questions with ease by coffee turned out to be one of Oracle's IB engineers, Ted Kim, who actually actively participates in the Infiniband Trade Association and integrates Oracle solutions with this highspeed network. This is why I love attending OOW. He granted me an hour of his time to talk about IB. This post is mostly based on that tech interview.Start of the actual post: Traditionally datatransfer between servers and storage elements happens in networks with up to 10 gigabit/seconds or in SANs with up to 8 gbps fiberchannel connections. Happens. Well, data rather trickles through.But nowadays data amounts grow well over the TeraByte order of magnitude, and multisocket/multicore/multithread Servers hunger data that these transfer technologies just can't deliver fast enough, causing all CPUs of this world do one thing at the same speed - waiting for data. And once again, I/O is the bottleneck in computing. FC and Ethernet can't keep up. We have half-TB SSDs, dozens of TB RAM to store data to be modified in, but can't transfer it. Can't backup fast enough, can't replicate fast enough, can't synchronize fast enough, can't load fast enough. The bad news is, everyone is used to this, like back in the '80s everyone was used to start compile jobs and go for a coffee. Or on vacation. The good news is, there's an alternative. Not so-called "bleeding-edge" 8gbps, but (as of now) 56. Not layers of overhead, but low latency. And it is available now. It has been for a while, actually. Welcome to the world of Infiniband. Short history:Infiniband was born as a result of joint efforts of HPAQ, IBM, Intel, Sun and Microsoft. They planned to implement a next-generation I/O fabric, in the 90s. In the 2000s Infiniband (from now on: IB) was quite popular in the high-performance computing field, powering most of the top500 supercomputers. Then in the middle of the decade, Oracle realized its potential and used it as an interconnect backbone for the first Database Machine, the first Exadata. Since then, IB has been booming, Oracle utilizes and supports it in a large set of its HW products, it is the backbone of the famous Engineered Systems: Exadata, SPARC SuperCluster, Exalogic, OVCA and even the new DB backup/recovery box. You can also use it to make servers talk highspeed IP to eachother, or to a ZFS Storage Appliance. Following Oracle's lead, even IBM has jumped the wagon, and leverages IB in its PureFlex systems, their first InfiniBand Machines.IB Structural Overview: If you want to use IB in your servers, the first thing you will need is PCI cards, in IB terms Host Channel Adapters, or HCAs. Just like NICs for Ethernet, or HBAs for FC. In these you plug an IB cable, going to an IB switch providing connection to other IB HCAs. Of course you're going to need drivers for those in your OS. Yes, these are long-available for Solaris and Linux. Now, what protocols can you talk over IB? There's a range of choices. See, IB isn't accepting package loss like Ethernet does, and hence doesn't need to rely on TCP/IP as a workaround for resends. That is, you still can run IP over IB (IPoIB), and that is used in various cases for control functionality, but the datatransfer can run over more efficient protocols - like native IB. About PCI connectivity: IB cards, as you see are fast. They bring low latency, which is just as important as their bandwidth. Current IB cards run at 56 gbit/s. That is slightly more than double of the capacity of a PCI Gen2 slot (of ~25 gbit/s). And IB cards are equipped usually with two ports - that is, altogether you'd need 112 gbit/s PCI slots, to be able to utilize FDR IB cards in an active-active fashion. PCI Gen3 slots provide you with around ~50gbps. This is why the most IB cards are configured in an active-standby way if both ports are used. Once again the PCI slot is the bottleneck. Anyway, the new Oracle servers are equipped with Gen3 PCI slots, an the new IB HCAs support those too. Oracle utilizes the QDR HCAs, running at 40gbp/s brutto, which translates to a 32gbp/s net traffic due to the 10:8 signal-to-data information ratio. Consolidation techniques: Technology never stops to evolve. Mellanox is working on the 100 gbps (EDR) version already, which will be optical, since signal technology doesn't allow EDR to be copper. Also, I hear you say "100gbps? I will never use/need that much". Are you sure? Have you considered consolidation scenarios, where (for example with Oracle Virtual Network) you could consolidate your platform to a high densitiy virtualized solution providing many virtual 10gbps interfaces through that 100gbps? Technology never stops to evolve. I still remember when a 10mbps network was impressively fast. Back in those days, 16MB of RAM was a lot. Now we usually run servers with around 100.000 times more RAM. If network infrastrucure speends could grow as fast as main memory capacities, we'd have a different landscape now :) You can utilize SRIOV as well for consolidation. That is, if you run LDoms (aka Oracle VM Server for SPARC) you do not have to add physical IB cards to all your guest LDoms, and you do not need to run VIO devices through the hypervisor either (avoiding overhead). You can enable SRIOV on those IB cards, which practically virtualizes the PCI bus, and you can dedicate Physical- and Virtual Functions of the virtualized HCAs as native, physical HW devices to your guests. See Raghuram's excellent post explaining SRIOV. SRIOV for IB is supported since LDoms 3.1.  This post is getting lengthier, so I will rename it to Part I, and continue it in a second post. 

  Read the article

• How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

  - by Dave B.

  I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

  Read the article

• BizTalk &ndash; Routing failure on Delivery Notifications (BizTalk 2006 R2 to 2013)

  - by S.E.R.

  Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/11/11/biztalk-routing-failure-on-delivery-notifications.aspxThis is a detailed explanation of a something I posted a few month ago on stackoverflow, concerning a weird behavior (a bug, really…) of the delivery notifications in BizTalk. Reminder: what are delivery notifications Mechanism BizTalk has the ability to automatically publish positive acknowledgments (ACK) when it has succeeded transmitting a message or negative acknowledgments (NACK) in case of a transmission failure. Orchestrations can use delivery notifications to subscribe to those ACKs and NACKs in order to know if a message sent on a one-way send port has been successfully transmitted. Delivery Notifications can be “activated” in two ways: The most common and easy way is to set the Delivery Notification property of a logical send port (in the orchestration designer) to Transmitted: Another way is to set the BTS.AckRequired context property of the message to be sent to true: NOTE: fundamentally, those methods are strictly equivalent since the fact of setting the Delivery Notification to Transmitted on the send port only tells BizTalk the BTS.AckRequired context property has to be set to true on the outgoing message. Related context properties ACKs and NACKs have a common set of propoted context properties, which are : Propriété Description AckType Equals ACK when successful or NACK otherwise AckID MessageID of the message concerned by the acknowledgment AckOwnerID InstanceID of the instance associated with the acknowledgment AckSendPortID ID of the send port AckSendPortName Name of the send port AckOutboundTransportLocation URI of the send port AckReceivePortID ID of the port the message came from AckReceivePortName Name of the port the message came from AckInboundTransportLocation URI of the port the message came from Detailed behavior The way Delivery Notifications are handled by BizTalk is peculiar compared to the standard behavior of the Message Box: if no active subscription exists for the acknowledgment, it is simply discarded. The direct consequence of this is that there can be no routing failure for an acknowledgment, and an acknowledgment cannot be suspended. Moreover, when a message is sent to a send port where Delivery Notification = Transmitted, a correlation set is initialized and a correlation token is attached to the message (Context property: CorrelationToken). This correlation token will also be attached to the acknowledgment. So when the acknowledgment is issued, it is automatically routed to the source orchestration. Finally, when a NACK is received by the source orchestration, a DeliveryFailureException is thrown, which can be caught in Catch section. Context of the problem Consider this scenario: In an orchestration, Delivery Notifications are activated on a One-Way send port In case of a transmission failure, the messaging instance is suspended and the orchestration catches an exception (DeliveryFailureException). When the exception is caught, the orchestration does some logging and then terminates (thanks to a Terminate shape). So that leaves only the suspended messaging instance, waiting to be resumed. Symptoms Once the problem that caused the transmission failure is solved, the messaging instance is resumed. Considering what was said in the reminder, we would expect the instance to complete, leaving no active or suspended instance. Nevertheless, the result is that the messaging instance is once more suspended, this time because of a routing failure: The routing failure report shows that the suspended message has the following attached properties: Explanation Those properties clearly indicate that the message being suspended is an acknowledgment (ACK in this case), which was published in the message box and was supended because no subscribers were found. This makes sense, since the source orchestration was terminated before we resumed the messaging instance. So its subscription to the acknowledgments was no longer active when the ACK was published, which explains the routing failure. But this behavior is in direct contradiction with what was said earlier: an acknowledgment must be discarded when no subscriber is found and therefore should not be suspended. Cause It is indeed an outright bug, which appeared with the SP1 of BizTalk 2006 R2 and was never corrected since then: not in the next 4 CUs, not in BizTalk 2009, not in 2010 and not event in 2013 – though I haven’t tested CU1 and CU2 for this last edition, but I bet there is nothing to be expected from those CUs (on this particular point). Side effects This bug can have pretty nasty side effects: this behavior can be propagated to other ports, due to routing mechanisms. For instance: you have configured the ESB Toolkit and have activated the “Enable routing failure for failed messages”. The result will be that the ESB Exception SQL send port will also try and publish ACKs or NACKs concerning its own messaging instances. In itself, this is already messy, but remember that those acknowledgments will also have the source correlation token attached to them… See how far it goes? Well, actually there is more: in SQL send ports, transactions will be rolled back because of the routing failure (I guess it also happens with other adapters - like Oracle, but I haven’t tested them). Again, think of what happens when the send port is the ESB Exception send port: your BizTalk box is going mad, but you have no idea since no exception can be written in the exception database! All of this can be tricky to diagnose, I can tell you that… Solution There is no real solution, only a work-around, but it won’t solve all of the problems and side effects. The idea is to create an orchestration which subscribes to all acknowledgments. That is to say: The message type of the incoming message will be XmlDocument The BTS.AckType property exists The logical receive port will use direct binding By doing so, all acknowledgments will be consumed by an instance of this orchestration, thus avoiding the routing failure. Here is an example of what this orchestration could look like: In order not to pollute the HAT and the DTA Db (after all, this orchestration is only meant to be a palliative to some faulty internal BizTalk mechanism, so there should be no trace of its execution), all tracking must be deactivated:

  Read the article

• Training a 'replacement', how to enforce standards?

  - by Mohgeroth

  Not sure that this is the right stack exchange site to ask this of, but here goes... Scope I work for a small company that employs a few hundred people. The development team for the company is small and works out of visual foxpro. A specific department in the company hired me in as a 'lone gunman' to fix and enhance a pre-existing invoicing system. I've successfully taken an Access application that suffered from a lot of risks and limitations and converted it into a C# application driven off of a SQL server backend. I have recently obtained my undergraduate and am no expert by any means. To help make up for that I've felt that earning microsoft certifications will force me to understand more about .net and how it functions. So, after giving my notice with 9 months in advance, 3 months ago a replacement finally showed up. Their role is to learn what I have been designing to an attempt to support the applications designed in C#. The Replacement Fresh out of college with no real-world work experience, the first instinct for anything involving data was and still is listboxes... any time data is mentioned the list box is the control of choice for the replacement. This has gotten to the point, no matter how many times I discuss other controls, where I've seen 5 listboxes on a single form. Classroom experience was almost all C++ console development. So, an example of where I have concern is in a winforms application: Users need to key Reasons into a table to select from later. Given that I know that a strongly typed data set exists, I can just drag the data source from the toolbox and it would create all of this for me. I realize this is a simple example but using databinding is the key. For the past few months now we have been talking about the strongly typed dataset, how to use it and where it interacts with other controls. Data sets, how they work in relation to binding sources, adapters and data grid views. After handing this project off I expected questions about how to implement these since for me this is the way to do it. What happened next simply floors me: An instance of an adapter from the strongly typed dataset was created in the activate event of the form, a table was created and filled with data. Then, a loop was made to manually add rows to a listbox from this table. Finally, a variable was kept to do lookups to figure out what ID the record was for updates if required. How do they modify records you ask? That was my first question too. You won't believe how simple it is, all you do it double click and they type into a pop-up prompt the new value to change it to. As a data entry operator, all the modal popups would drive me absolutely insane. The final solution exceeds 100 lines of code that must be maintained. So my concern is that none of this is sinking in... the department is only allowed 20 hours a week of their time. Up until last week, we've only been given 4-5 hours a week if I'm lucky. The past week or so, I've been lucky to get 10. Question WHAT DO I DO?! I have 4 weeks left until I leave and they fully 'support' this application. I love this job and the opportunity it has given me but it's time for me to spread my wings and find something new. I am in no way, shape or form convinced that they are ready to take over. I do feel that the replacement has the technical ability to 'figure it out' but instead of learning they just write code to do all of this stuff manually. If the replacement wants to code differently in the end, as long as it works I'm fine with that as horrifiying at it looks. However to support what I have designed they MUST to understand how it works and how I have used controls and the framework to make 'magic' happen. This project has about 40 forms, a database with over 30 some odd tables, triggers and stored procedures. It relates labor to invoices to contracts to projections... it's not as simple as it was three years ago when I began this project and the department is now in a position where they cannot survive without it. How in the world can I accomplish any of the following?: Enforce standards or understanding in constent design when the department manager keeps telling them they can do it however they want to Find a way to engage the replacement in active learning of the framework and system design that support must be given for Gracefully inform sr. management that 5-9 hours a week is simply not enough time to learn about the department, pre-existing processes, applications that need to be supported AND determine where potential enhancements to the system go... Yes I know this is a wall of text, thanks for reading through me but I simply don't know what I should be doing. For me, this job is a monster of a reference and things would look extremely bad if I left and things fell apart. How do I handle this?

  Read the article

• StreamInsight 2.1 Released

  - by Roman Schindlauer

  The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program {     static void Main(string[] args)     {         using (Server server = Server.Create("Default"))         {             // Create an app             Application app = server.CreateApplication("app");             // Define a simple observable which generates an integer every second             var source = app.DefineObservable(() =>                 Observable.Interval(TimeSpan.FromSeconds(1)));             // Define a sink.             var sink = app.DefineObserver(() =>                 Observer.Create<long>(x => Console.WriteLine(x)));             // Define a query to filter the events             var query = from e in source                         where e % 2 == 0                         select e;             // Bind the query to the sink and create a runnable process             using (IDisposable proc = query.Bind(sink).Run("MyProcess"))             {                 Console.WriteLine("Press a key to dispose the process...");                 Console.ReadKey();             }         }     } }   That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

  Read the article

• StreamInsight 2.1 Released

  - by Roman Schindlauer

  The wait is over—we are pleased to announce the release of StreamInsight 2.1. Since the release of version 1.2, we have heard your feedbacks and suggestions and based on that we have come up with a whole new set of features. Here are some of the highlights: A New Programming Model – A more clear and consistent object model, eliminating the need for complex input and output adapters (though they are still completely supported). This new model allows you to provision, name, and manage data sources and sinks in the StreamInsight server. Tight integration with Reactive Framework (Rx) – You can write reactive queries hosted inside StreamInsight as well as compose temporal queries on reactive objects. High Availability – Check-pointing over temporal streams and multiple processes with shared computation. Here is how simple coding can be with the 2.1 Programming Model: class Program {     static void Main(string[] args)     {         using (Server server = Server.Create("Default"))         {             // Create an app             Application app = server.CreateApplication("app");             // Define a simple observable which generates an integer every second             var source = app.DefineObservable(() =>                 Observable.Interval(TimeSpan.FromSeconds(1)));             // Define a sink.             var sink = app.DefineObserver(() =>                 Observer.Create<long>(x => Console.WriteLine(x)));             // Define a query to filter the events             var query = from e in source                         where e % 2 == 0                         select e;             // Bind the query to the sink and create a runnable process             using (IDisposable proc = query.Bind(sink).Run("MyProcess"))             {                 Console.WriteLine("Press a key to dispose the process...");                 Console.ReadKey();             }         }     } }   That’s how easily you can define a source, sink and compose a query and run it. Note that we did not replace the existing APIs, they co-exist with the new surface. Stay tuned, you will see a series of articles coming out over the next few weeks about the new features and how to use them. Come and grab it from our download center page and let us know what you think! You can find the updated MSDN documentation here, and we would appreciate if you could provide feedback to the docs as well—best via email to [email protected]. Moreover, we updated our samples to demonstrate the new programming surface. Regards, The StreamInsight Team

  Read the article

• ckeditor: toggle button in facelets

  - by Shilpa

  I am trying to toggle between CKEditor and textarea in a facelet(.xhtml) file. I have used the same code in a jsp file and it works fine. But in .xhtml file its not doing the toggle between ckeditor and plain editor.It loads ckeditor both the times.Can anyone please let me know what am I missing. Code of xhtml file: <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:ckeditor="http://ckeditor.com"> <head> <title>Welcome PAge</title> <script type="text/javascript" src="ckeditor/ckeditor.js"></script> <script type="text/javascript" src="ckeditor/adapters/jquery.js"></script> <script type="text/javascript" src="ckeditor/config.js"></script> </head> <body> <div>Welcome Page!!</div> <h:form> <center><p><h:outputText value="#{userBean.username} logged in"/></p></center> <center> <p> Questions: <h:inputTextarea id="editor1" class="ckeditor" rows="20" cols="75" /> <br></br> </p> </center> <h:commandButton value="Ckeditor" onclick="ckeditor.replace('editor1');" /> <h:commandButton value="Text editor" onclick="ckeditor.instances.editor1.destroy();" /> <h:commandButton value="Get Data" onclick="alert(ckeditor.instances.editor1.getData());" /> <br></br> <br></br> </h:form> </body> </html> Thanks in advance, Shilpa

  Read the article

• Linux: How to find all serial devices (ttyS, ttyUSB, ..) without opening them?

  - by Thomas Tempelmann

  What is the proper way to get a list of all available serial ports/devices on a Linux system? In other words, when I iterate over all devices in /dev/, how do I tell which ones are serial ports in the classic way, i.e. those usually supporting baud rates and RTS/CTS flow control? The solution would be coded in C. I ask because I am using a 3rd party library that does this clearly wrong: It appears to only iterate over /dev/ttyS*. The problem is that there are, for instance, serial ports over USB (provided by USB-RS232 adapters), and those are listed under /dev/ttyUSB*. And reading the Serial-HOWTO at Linux.org, I get the idea that there'll be other name spaces as well, as time comes. So I need to find the official way to detect serial devices. Problem is that there appears none documented, or I can't find it. I imagine one way would be to open all files from /dev/tty* and call a specific ioctl() on them that is only available on serial devices. Would that be a good solution, though? Update hrickards suggested to look at the source for "setserial". Its code does exactly what I had in mind: First, it opens a device with: fd = open (path, O_RDWR | O_NONBLOCK) Then it invokes: ioctl (fd, TIOCGSERIAL, &serinfo) If that call returns no error, then it's a serial dev, apparently. I found similar code here, which suggested to also add the O_NOCTTY option. There is one problem with this approach, though: When I tested this code on BSD Unix (i.e. OSX), it worked as well, however serial devices that are provided thru Bluetooth cause the system (driver) to try to connect to the bluetooth device, which takes a while before it'll return with a timeout error. This is caused by just opening the device. And I can imagine that similar things can happen on Linux as well - ideally, I should not need to open the device to figure out its type. I wonder if there's also a way to invoke ioctl functions without an open, or open a device in a way that it does not cause connections to be made? Any ideas?

  Read the article

• What's Wrong With My VB.NET Code Of Windows Forms Application?

  - by Krishanu Dey

  I've to forms frmPrint & frmEmail and a dataset(MyDataset) with some DataTable and DataTable Adapters. In frmPrint I've the following Sub Public Sub StartPrinting() try adapterLettersInSchedules.Fill(ds.LettersInSchedules) adapterLetters.Fill(ds.Letters) adapterClients.Fill(ds.Clients) adapterPrintJobs.GetPrintJobsDueToday(ds.PrintJobs, False, DateTime.Today) For Each prow As MyDataSet.PrintJobsRow In ds.PrintJobs Dim lisrow As MyDataSet.LettersInSchedulesRow = ds.LettersInSchedules.FindByID(prow.LetterInScheduleID) If lisrow.Isemail = False Then Dim clientrow As MyDataSet.ClientsRow = ds.Clients.FindByClientID(prow.ClientID) Dim letterrow As MyDataSet.LettersRow = ds.Letters.FindByID(lisrow.LetterID) 'prow. 'lisrow.is Label1.SuspendLayout() Label1.Refresh() Label1.Text = "Printing letter" txt.Rtf = letterrow.LetterContents txt.Rtf = txt.Rtf.Replace("<%Firstname%>", clientrow.FirstName) txt.Rtf = txt.Rtf.Replace("<%Lastname%>", clientrow.LastName) txt.Rtf = txt.Rtf.Replace("<%Title%>", clientrow.Title) txt.Rtf = txt.Rtf.Replace("<%Street%>", clientrow.Street) txt.Rtf = txt.Rtf.Replace("<%City%>", clientrow.City) txt.Rtf = txt.Rtf.Replace("<%State%>", clientrow.State) txt.Rtf = txt.Rtf.Replace("<%Zip%>", clientrow.Zip) txt.Rtf = txt.Rtf.Replace("<%PhoneH%>", clientrow.PhoneH) txt.Rtf = txt.Rtf.Replace("<%PhoneW%>", clientrow.PhoneW) txt.Rtf = txt.Rtf.Replace("<%Date%>", DateTime.Today.ToShortDateString) Try PDoc.PrinterSettings = printDlg.PrinterSettings PDoc.Print() prow.Printed = True adapterPrintJobs.Update(prow) Catch ex As Exception End Try End If Next prow ds.PrintJobs.Clear() Catch ex As Exception MessageBox.Show(ex.Message, "Print", MessageBoxButtons.OK, MessageBoxIcon.Error) End Try End Sub And in frmEmail i've the Following Sub Public Sub SendEmails() try adapterLettersInSchedules.Fill(ds.LettersInSchedules) adapterLetters.Fill(ds.Letters) adapterClients.Fill(ds.Clients) adapterEmailJobs.GetEmailJobsDueToday(ds.EmailJobs, False, Today) Dim ls_string As String For Each prow As MyDataSet.EmailJobsRow In ds.EmailJobs Dim lisrow As MyDataSet.LettersInSchedulesRow = ds.LettersInSchedules.FindByID(prow.LetterInScheduleID) If lisrow.Isemail = True Then Dim clientrow As MyDataSet.ClientsRow = ds.Clients.FindByClientID(prow.ClientID) Dim letterrow As MyDataSet.LettersRow = ds.Letters.FindByID(lisrow.LetterID) txt.Rtf = letterrow.LetterContents ls_string = RTF2HTML(txt.Rtf) ls_string = Mid(ls_string, 1, Len(ls_string) - 176) If ls_string = "" Then Throw New Exception("Rtf To HTML Conversion Failed") Label1.SuspendLayout() Label1.Refresh() Label1.Text = "Sending Email" If SendEmail(clientrow.Email, ls_string, letterrow.EmailSubject) Then Try prow.Emailed = True adapterEmailJobs.Update(prow) Catch ex As Exception End Try Else prow.Emailed = False adapterEmailJobs.Update(prow) End If End If Next prow Catch ex As Exception MessageBox.Show(ex.Message, "Email", MessageBoxButtons.OK, MessageBoxIcon.Error) End Try End Sub I'm running this two subs using two different Threads. Public th As New Thread(New ThreadStart(AddressOf StartFirstPrint)) Public th4 As New Thread(New ThreadStart(AddressOf sendFirstEmail)) Here is the code of StartFirstPrint and sendFirstEmail Public Sub StartFirstPrint() Do While thCont Try Dim frm As New frmPrint() 'frm.MdiParent = Me frm.StartPrinting() Catch ex As Exception End Try Loop End Sub Public Sub sendFirstEmail() Do While thCont Try Dim frmSNDEmail As New frmEmail frmSNDEmail.SendEmails() Catch ex As Exception End Try Loop End Sub the thCont is a public boolean variable that specifies when to shop those threads. Most Of the time this works very well. But some times it gives errors Like the following image I don't know why is this occurring. Please help me.

  Read the article

• CKEdtior not displaying

  - by user1708468

  I am trying to integrate CKEditor into a MVC application. As far as I can tell all I should really have to do is. Add the following to my master page. <script type="text/javascript" src="../../ckeditor/ckeditor.js"></script> <script type="text/javascript" src="../../ckeditor/adapters/jquery.js"></script> <script type="text/jscript" src="../../Scripts/jquery-1.3.2.js"></script> Then on my view itself. I have the following code: <script type="text/javascript"> $(document).ready(function() { $('#news').ckeditor(); }); </script> <fieldset> <legend>Fields</legend> <p> <label for="title">Title:</label> <%=Html.TextBox("title")%> <%= Html.ValidationMessage("title", "*") %> </p> <p> <label for="news">News:</label> <%=Html.TextArea("news")%> <%= Html.ValidationMessage("news", "*") %> </p> <p> <label for="publishedDate">Publication Date:</label> <%= Html.TextBox("publishedDate") %> <%= Html.ValidationMessage("publishedDate", "*") %> </p> <p> <input type="submit" value="Create" /> </p> </fieldset> Please bear in mind I am not trying to get this to actually DO anything postback wise. Just to actually render in the first place. Can someone point out exactly what it is I am doing wrong? Oh and if it helps any VS is also giving me the following warning: Warning 1 Error updating JScript IntelliSense: ..Cut to Protect the innocent..\ckeditor\ckeditor.js: 'getFirst()' is null or not an object @ 15:180 ..Cut to Protect the innocent..\Views\Shared\Admin.Master 1 1 ilaTraining

  Read the article

• WDS 2008 R2 DHCP Error

  - by scampbell

  Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment' when booting from a standard WDS boot.wim image taken from a Windows 7 DVD. I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM. When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP? DHCP server is not on the WDS box but is in the same subnet. As per some fixes I have read I enabled RSTP on my switches but that didnt help. I have included the end of setupact.log to see if any of you have any ideas. Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG. I dont suppose theres any way of increasing the timeout? Thanks. 2011-04-11 17:26:31, Info [0x0b0022] WDS StartNetworking: Trying to start networking. 2011-04-11 17:26:31, Info WDS Network service dhcp not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service lmhosts not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service lanmanworkstation not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service bfe not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service ikeext not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service mpssvc not running or could not be queried: 264e18 1 1 2011-04-11 17:27:24, Info WDS Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded 2011-04-11 17:27:25, Info WDS No computer name specified, generating a random name. 2011-04-11 17:27:25, Info WDS Renaming computer to MININT-VN2P876. 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Service winmgmt disable: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt stop: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt enable: 0x00000000 2011-04-11 17:27:25, Info WDS Released profiling mutex 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Install MS_MSCLIENT: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_NETBIOS: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_SMB: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_TCPIP6: 0x0004a020 2011-04-11 17:27:26, Info WDS Install MS_TCPIP: 0x0004a020 2011-04-11 17:27:26, Info WDS Service dhcp start: 0x00000000 2011-04-11 17:27:26, Info WDS Service lmhosts start: 0x00000000 2011-04-11 17:27:26, Info WDS Service ikeext start: 0x00000000 2011-04-11 17:27:26, Info WDS Service mpssvc start: 0x00000000 2011-04-11 17:27:26, Info WDS Released profiling mutex 2011-04-11 17:27:26, Info WDS Spent 967ms installing network components 2011-04-11 17:27:28, Info WDS Spent 2247ms installing network drivers 2011-04-11 17:27:38, Info WDS QueryAdapterStatus: no operational adapters found. 2011-04-11 17:27:38, Info WDS Spent 10140ms confirming network initialization; status 0x80004005 2011-04-11 17:27:38, Info WDS WaitForNetworkToInitialize failed; ignoring error 2011-04-11 17:27:38, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set: 2011-04-11 17:27:38, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb] 2011-04-11 17:27:38, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]

  Read the article

• Windows 7 sometimes boots in VGA mode

  - by TuxRug

  I have an Asus G50VT-x5 laptop with nVidia GeForce9800M-GS graphics. Normally, Windows boots normally, but about 20% of the time (rough estimate), it will boot with the fallback VGA driver, maxing out at 800x600 with no Aero. I've checked the system logs and there is nothing indicating an error loading the nVidia driver. It even specifies in the logs that the Nvidia Display Driver service started successfully, even though it has booted in safe graphics mode. This has been happening for a while, but it's happening a little more often now than it was before. Since the first time my system exhibited this behavior, I have updated my graphics driver a handful of times. I used System Information for Windows to check for problems there, but the only thing that stood out was the following: Core Temperature 4486449 °C (8075639 °F) Shaders Temperature 1171513530 °C (2108724330 °F) I know this reading is incorrect, because my laptop is nowhere near the surface of the sun and my desk has not burst into flames. When it's opererating normally, I get a sane reading like [Core Temperature 58 °C (136 °F)] with no Shaders Temperature listed. All I have to do to resolve the issue is reboot. I have seen no stability issues with the graphics or anything else. A long time ago, I had an issue with this computer where my framerate would suddenly drop during a 3D game from 40fps to <1fps, but after looking at the temperature readout immediately after quitting a game, I removed the bottom panel and blew the dust out of the vent and heatsink. Since then I have no drops in framerate under any situation. I have uploaded a zip containing the SIW reports for when the problem is occurring and when the computer is operating normally. I don't have a paid account so it can only be downloaded 10 times, so please only download the reports if you think you can use them. If you try to download the reports and they are no longer available, please comment and I will re-upload them. If you want to look at the files, they are on Rapidshare. EDIT It happened again, and I looked a little deeper into the System logs. When this happens, there are a lot of errors about other device drivers unable to start. All of these errors are for PnP drivers. Also, my USB keyboard and mouse take a few moments before they actually start working, although this happens sometimes the first normal boot as well. I am quite sure this is related, so I am adding the pnp tag. Also, CHKDSK will not run on boot. Even if a check is scheduled or a volume is manually set as dirty, CHKDSK will be skipped entirely, not even leaving an entry in the System logs. I tried running CHKNTFS /D, which did not work. I then manually changed my HKLM\System\CurrentControlSet\Control\Session Manager BootExecute value to the default listed on Microsoft's website. That did not work either. I ended up booting to repair mode and running CHKDSK there, which found a number of minor inconsistencies on my system drive, but none on my data drive. I have no idea if this is related. Some more information for those who don't download my SIW report file: Antivirus and Firewall are ESET Smart Security I have three different virutalization programs installed: VMware Player, Windows Virtual PC, and VirtualBox. The network adapters for these show up in the log of failed device starts. EDIT 2 I tried running sfc /scannow, which reported that it found corrupted files that could not be fixed. The CBS log is extremely cryptic. I tried booting to my install disk, launching repair mode, and doing an offline sfc from there, which produced the same result.

  Read the article

• Windows XP Video Configuration Issues

  - by Matt

  Recently I had my motherboard burn out on me. Needing the machine for work, I purchased a different motherboard and installed that. Generally a reinstall of windows is good at that point but I am not in a position to do that so I just decided I would live with it for now. When I can log-in, everything works fine, what doesn't is getting to the log-in prompt to begin with. Basically when I first installed the new mobo, every time I rebooted the machine, I would not get the windows login prompt. One of the monitors would receive a signal but the screen would be black. Moving the mouse would not show the cursor and hitting the up arrow key and typing my password and hitting enter (which will normally log you in without mouse) wouldn't change anything. I would then change the monitor configuration around (2 lcd's and a crt) and reboot and at least one of the monitors would work and display the login prompt. I could then go into display properties and turn on the other monitors. However if I rebooted again, I would get the black screen on one monitor again. I would then have to change the configuration again to one not used before and I could re-do the manual setup at that point. I think windows saves the configurations so I had to keep giving it new ones. Needless to say I've been trying to not turn off my machine. Early this week I actually got the prompt to come up without playing musical monitors. Thinking everything was getting better, I found no harm in rebooting to install the latest windows updates. Boy was I wrong. Now no matter what I do I can't get a windows log-in prompt to display. I've tried almost every conceivable combination. The new mobo has onboard video so I set that in the bios (yea bios screen always displays fine, its not until windows boots that there is a problem) to be the primary video. Still no luck. I have two other graphics cards in the machine which I'm using. Tried all kinds of configurations between those and on-board but still get this black screen of death. I read somewhere that deleting the video drivers would reset the configurations. I logged into safe mode (which works on one monitor), and uninstalled the display drivers. Still no luck and when I booted back into safe mode, it wanted to install new hardware and the display adapters weren't there as expected. Anyone have any ideas? A fresh install would be a pain and I might be getting my old board back from RMA soon so not sure I want to go through with that just yet. Only thing I can think of is to continue to try other combinations like physically removing the graphics cards. They are both EVGA 8600 cards and the windows boot screen does display fwiw.

  Read the article

• Using different SSDs types (not only SATA based) as system drive

  - by Hubert Kario

  Currently I have a Thinkpad X61s and want to make it both a bit faster and a bit more power efficient. For that reason I thought that adding SSD drive would make most sense. Unfortunately, because of financial reasons, buying SSD of over 200GB capacity is out of reach for me (not only it would be worth more than the rest of the laptop, but also I currently have a 500GB drive in it, so even such a drive would be kind of a downgrade for me). During preliminary testing with a cheap Transcend 4GB Class 6 (14MiB/s streaming, 9MiB/s random read) card I experienced boot times to be reduced by half so putting the OS only on it would already would be an improvement. Unfortunately, my system now is about 11GiB in size so anything less than 16GB would be constraining. In this laptop I can connect additional drives on at least 5 different ways: using SATA-ATA converter caddy in the X6 Ultrabase using internal mini PCIe slot using integrated SDHC slot using CardBus (a.k.a PCMCIA or PC Card) slot using USB Thankfully, because I use only Linux on this PC the bootability of them is irrelevant as I can put the /boot partition on internal HDD and / on any of the above mentioned Flash memories (as I already did for the SDHC test). From what I was able to research and from my own experience those options come with rather big downsides or other problems: SATA-ATA caddy It has three downsides: I have to carry the Ultrabse with me at all times (it's not really inconvenient, but those grams do add) and couldn't disconnect it when I want to disconnect the battery It makes the bay unusable for the optical drive and occasional quick access to other hard drives the only caddies I could buy have rather flaky controllers in them so putting my OS on it would hamper its stability Internal mini PCIe slot This would be an ideal solution, if only I could find real PCIe SSDs, not only devices that could talk only SATA or ATA over PCIe mechanical connection (the ones used in Dell Mini or Asus EEE). Theoretically Samsung did release such devices but I couldn't find them in retail anywhere. Integrated SDHC slot It's a nice solution with a single drawback: the fastest 16GB SDHC card on the market can only do around 35MiB/s read and 15MiB/s write while still costing like a normal 40GB SATA SSD that's 10 times faster. Not really cost-effective. CardBus (a.k.a PCMCIA or PC Card) slot Those cards are much faster than the SDHC option (there are ones that can do well over 50MiB/s read in benchmarks) and from what I could find the PCMCIA controller in my laptop does support UDMA so it should be able to deliver comparable speeds. They still cost similarly to SD cards but at least they provide streaming performance comparable to my current HDD. USB That's the worst option. Not only is it limited to 20-30MiB/s by the interface itself the drive would stick out of the laptop so it's a big no no. The question As such I think that going the "CF in a CardBus adapter" route will be the best option. My question is: did anyone try using CF cards in CardBus adapters as system drives with Linux on Thinkpad laptops? Laptops in general? What was the real-world performance? I don't have any CF cards so I can't check how well does it work with suspend/resume, or whatever it's easy to make it work in initramfs (I'm using ArchLinux and SD card was trivial — add 3 modules in single config line and rebuilding initramfs) so any tips/gotchas on this are welcome as well.

  Read the article

• Trying to prevent Windows from hibernating/sleeping automatically

  - by user328821

  My Dell XPS 8700 (Win 7) suddenly began putting itself to sleep at 6pm daily, even if I'm typing. I don't know what caused this to occur, except possibly a windows update that took place in the middle of the night. I initially went into settings for power and saw 2 plans set up, one from Dell and the other window's Power saver plan. I set both to never for sleep and hibernate yet it still occurred. I have current drivers and a fairly new UPS that has software to set to shutdown only after power loss. Dell is of little help, can anyone point me in the right direction? I did do the powerdfg -energy program and came up with this: Power Efficiency Diagnostics Report Scan Time 2014-05-08T19:21:48Z Scan Duration 60 seconds System Manufacturer Dell Inc. System Product Name XPS 8700 BIOS Date 08/23/2013 BIOS Version A04 OS Build 7601 Platform Role PlatformRoleDesktop Plugged In true Process Count 115 Thread Count 1631 Report GUID {097caf99-039b-44c3-b154-d797bfbfdfcc} Analysis Results Errors Power Policy:Sleep timeout is disabled (Plugged In) The computer is not configured to automatically sleep after a period of inactivity. System Availability Requests:System Required Request The device or driver has made a request to prevent the system from automatically entering sleep. Requesting Driver Instance HDAUDIO\FUNC_01&VEN_10EC&DEV_0899&SUBSYS_102805B7&REV_1000\4&220b1bbc&0&0001 Requesting Driver Device Realtek High Definition Audio CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 9.48 Warnings Platform Timer Resolution:Platform Timer Resolution The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. Current Timer Resolution (100ns units) 10000 Maximum Timer Period (100ns units) 156001 Platform Timer Resolution:Outstanding Kernel Timer Request A kernel component or device driver has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Request Count 2 Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Requesting Process ID 8672 Requesting Process Path \Device\HarddiskVolume3\Program Files (x86)\Mozilla Firefox\firefox.exe Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 100000 Requesting Process ID 1212 Requesting Process Path \Device\HarddiskVolume3\Windows\System32\svchost.exe Power Policy:802.11 Radio Power Policy is Maximum Performance (Plugged In) The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes. CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name audiodg.exe PID 1304 Average Utilization (%) 4.73 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\msvcrt.dll 1.88 \Device\HarddiskVolume3\Windows\System32\MaxxAudioAPO5064.dll 1.77 \Device\HarddiskVolume3\Windows\System32\AudioEng.dll 0.80 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name thunderbird.exe PID 6036 Average Utilization (%) 0.35 Module Average Module Utilization (%) \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\xul.dll 0.16 \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\mozjs.dll 0.05 \SystemRoot\System32\win32k.sys 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name dwm.exe PID 1340 Average Utilization (%) 0.25 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\dwmcore.dll 0.08 \Device\HarddiskVolume3\Windows\System32\nvwgf2umx.dll 0.05 \SystemRoot\system32\ntoskrnl.exe 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace.

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25  | Next Page >