Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 22/309 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• Audio is working, but the speaker test doesn't work

  - by Pacquo

  I've installed Ubuntu 12.04 LTS from a minimal cd on a netbook (Asus 1001 PXD). I've installed the ubuntu-desktop package using the --no-install-recommends option. Everything works fine, except the "sound test" for headphones or analog speakers. Clicking on the "test" buttons (front left and front right) I don't hear any sound. Despite this, the audio is working properly. I've checked the audio levels with alsamixer; I have also checked that the test sounds actually exist in /usr/share/sounds/alsa. I tried an installation of Ubuntu 12.04 LTS made with the desktop-cd, and in this case the speaker test works properly. I suppose, therefore, that the problem could depend on the lack of a package, but I have not identified which one.

  Read the article

• Couldnt find a way to open blender software

  - by sapphirebox001

  I am new to Ubuntu. I downloaded the latest version of Blender (2.70a) from official blender.org site as an tar.bz2 file. My Ubuntu OS is 14.04 LTS amd64 bit os, and I am sure that I have downloaded the correct version of blender. I have read that for security reasons, Ubuntu does not allow executing exe files. Since the downloaded package contains blender as an executable/x-executable type, it is not able to execute. I do not have an internet connection in that computer too. Also the "Allow executing file as program" checkbox is checked by default. Still double clicking it does not execute the file. Can anyone say how to open this file? P.S: Wine also checked but requires active internet connection, which I dont have.

  Read the article

• Wrong EFI System Partition GUID?

  - by artificer

  On a new GPT initialized disk (second PC disk) I created a FAT32 partition using gparted. I want to use it as an EFI System Partition so I flagged it as boot. After that I checked the UUID using the gparted “partition information” option and it reported: 09B1-97A5. As far as I understand it should be C12A7328-F81F-11D2-BA4B-00A0C93EC93B. I also checked my running operative system disk (Ubuntu 14) and found that Gparted reports EB78-9AD2 for my actual boot partition UUID. What exactly is gparted reporting as UUID on my EFI system partition and why it doesn’t match with the expected C12A7328-F81F-11D2-BA4B-00A0C93EC93B ID?

  Read the article

• Files Not Uploading

  - by Howdy_McGee

  So I'm running wordpress. I will make changes to theme files and upload them successfully but none of the changes show up on the actual website. At first I thought it was the wrong theme but I have specific theme files I created that are in there so I'm using the right theme. Then I thought it was a server problem and maybe the companies server are down so I checked a few other websites and updated information just fine. All on linux servers. Then I jumped to Wordpress to make sure it wasn't a wordpress problem but I can update the files fine from their Admin Panel. I checked to make sure it wasn't Filezilla Caches or Browser Caches so I cleared them both. What could be the problem? If it had to deal with the Filezilla client permissions I imagine I would get an error upon uploading but it uploads just fine. Suggestions would be extremely helpful I have no clue.

  Read the article

• Check Checkboxes dynamically

  - by Selom

  Hi, ive been dealing with this for some time now and need your help. well I have an array $arrayAmenities which contains a combination of the following data based on what is fetched from the database: Air Conditioned Bar Brunch Party Room Tea Room Terrace Valet I would like the application to dynamically check the following set of checkboxes based on the data contained in the array. With my code only one checkbox is checked based on the first data contained in the array. Can you please tell what Im missing? Thanks for answering. code: //get amenities one by one in order to set the checkboxes $arrayAmenities = explode(',', $rest_amenities ); $i=0; while(count($arrayAmenities) > $i) { var_dump($arrayAmenities[$i]); switch($arrayAmenities[$i]) { case 'Air Conditioned': $checkedAir = 'checked=true'; break; case 'Bar': $checkedBar = 'checked=true'; break; case 'Brunch': $checkedBru = 'checked=true'; break; case 'Party Room'; $checkedPar = 'checked=true'; break; } $i+=1; } } checkboxes <table cellpadding="0" cellspacing="0" style="font-size:10px"> <tr> <td style="border-top:1px solid #CCC;border-right:1px solid #CCC;border-left:1px solid #CCC; padding-left:5px ">Air Conditioned <input type="checkbox" name="air_cond" <?php print $checkedAir;?> value="Air Conditioned"></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC;">Bar <input type="checkbox" name="bar" value="Bar" <?php print $checkedBar;?>></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC; ">Brunch <input type="checkbox" name="brunch" value="Brunch" <?php print $checkedBru;?>></td> </tr> <tr> <td style="border-top:1px solid #CCC;border-right:1px solid #CCC; border-bottom:1px solid #CCC; border-left:1px solid #CCC; padding-left:5px">Party Room <input <?php print $checkedPar;?> type="checkbox" name="party_room" value="Party Room" ></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC; border-bottom:1px solid #CCC;">Tea Room <input type="checkbox" name="tea_room" value="Tea Room" ></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC; border-bottom:1px solid #CCC;">Terrace <input type="checkbox" name="terrace" value="Terrace"></td> </tr> <tr> <td colspan="3" style="border-bottom:1px solid #CCC; border-left:1px solid #CCC; border-right:1px solid #CCC; padding-left:5px">Valet <input type="checkbox" name="valet" value="Valet" ></td> </tr> </table>

  Read the article

• Manipulate multiple check boxes by ID using unobtrusive java script?

  - by Dean

  I want to be able to select multiple check boxes onmouseover, but instead of applying onmouseover to every individual box, I've been trying to work out how to do so by manipulating check boxes by ID instead, although I'm not sure where to go from using getElementById,. So instead of what you see below. <html> <head> <script> var Toggle = true; var Highlight=false; function handleKeyPress(evt) { var nbr; if (window.Event) nbr = evt.which; else nbr = event.keyCode; if(nbr==16)Highlight=true; return true; } function MakeFalse(){Highlight=false;} function SelectIt(X){ if(X.checked && Toggle)X.checked=false; else X.checked=true; } function ChangeText() { var test1 = document.getElementById("1"); test1.innerHTML = "onmouseover=SelectIt(this)" } </script> </head> <body> <form name="A"> <input type="checkbox" name="C1" onmouseover="SelectIt(this)" id="1"><br> <input type="checkbox" name="C2" onmouseover="SelectIt(this)" id="2"><br> <input type="checkbox" name="C3" onmouseover="SelectIt(this)" id="3"><br> <input type="checkbox" name="C4" onmouseover="SelectIt(this)" checked="" disabled="disabled" id="4"><br> <input type="checkbox" name="C5" onmouseover="SelectIt(this)" id="5"><br> <input type="checkbox" name="C6" onmouseover="SelectIt(this)" id="6"><br> <input type="checkbox" name="C7" onmouseover="SelectIt(this)" id="7"><br> <input type="checkbox" name="C8" onmouseover="SelectIt(this)" id="8"><br> </form> </body> </html> I want to be able to apply the onmousover effect to an array of check boxes like this <form name="A"> <input type="checkbox" name="C1" id="1"><br> <input type="checkbox" name="C2" id="2"><br> <input type="checkbox" name="C3" id="3"><br> <input type="checkbox" name="C4" checked="" disabled="disabled" id="4"><br> <input type="checkbox" name="C5" id="5"><br> <input type="checkbox" name="C6" id="6"><br> <input type="checkbox" name="C7" id="7"><br> <input type="checkbox" name="C8" id="8"><br> </form> After trying the search feature of stackoverflow.com and looking around on Google I haven't been able to a find a solution that makes sense to me thus far, although I'm still in the process of learning so I fear I might be trying to do something too advanced for my level of knowledge.

  Read the article

• jquery-ui .draggable is not a function error

  - by niczoom

  I am getting the following error (using Firefox 3.5.9): $("#dragMe_" + myCount).draggable is not a function $("#dragMe_"+myCount).draggable({ containment: 'parent', axis: 'y' }); Line 231 http://www.liamharding.com/pgi/pgi.php Link to page in question : http://www.liamharding.com/pgi/pgi.php For example, click the 2 checkbox's 'R25 + R50 Random Walk' then click Show/Refresh Graphs. Two graphs should be displayed, both with draggable thin horizontal red lines. Re-open the options panel and de-select R50 Random Walk, now click Show/Refresh Graphs again, 1 graph is removed and the other updated; now re-select R50 Random Walk and click Show/Refresh, you will find the still checked R25 graph gets updated ok the above error occurs and i cant figure out why. Initially, when displaying the first 2 graphs it uses the same code and it works just fine. The error occurs on this line: //********* ERROR OCCURS HERE ********** $("#dragMe_"+myCount).draggable({ containment: 'parent', axis: 'y' }); Here is the code for the Show/Refresh Graphs.click() event: $("#btnShowGraphs").click(function(){ // Hide 'Options' panel (only if open AND an index is checked) if (IsOptionsPanelOpen && ($("#indexCheck:checked").length != 0)) {$('#optionImgDiv').click();}; var myCount = 0; var divIsNew = false; var gif_loader_small = '<div id="gif_loader_small"></div>'; var gif_loader_big = '<div id="gif_loader_big"></div>'; $("input:checkbox[id=indexCheck]").each(function() { if (this.checked) { // check for an existing wrapper div for the current forex item, using the current checkbox value (foxex name) if ( $("#"+this.value).length == 0 ) { console.log("New 'graphContainer' div : "+this.value); divIsNew = true; // Create new divs for graph image, drag bar and heading var $structure = " \ <li id=\""+this.value+"\" class=\"graphContainer\"> \ <div id=\"dragMe_"+myCount+"\" class=\"dragMe\"></div> \ <div id=\"image_"+myCount+"\" class=\"image\"></div> \ <div id=\"heading_"+myCount+"\" class=\"heading\"></div> \ </li> \ "; $('#graphResults').append($structure); // Hide dragMe DIV $('#dragMe_'+myCount).hide(); // Make 'dragMe' draggable div //********* ERROR OCCURS HERE ********** $("#dragMe_"+myCount).draggable({ containment: 'parent', axis: 'y' }); } // Display small loading gif $(gif_loader_small).clone().appendTo( $(this).parent() ); // Display large circular loading gif var $loader = $(gif_loader_big); // add temporary css attributes onto existing graph divs as they need to be displayed diffrently if(!divIsNew){ console.log("Reposition existing 'gif_loader_big' div"); $loader = $(gif_loader_big).css({ "position" : "absolute", "top" : "35%", "opacity" : ".85"}); } // add newly styled big-loader-gif to index div $loader.clone().prependTo( $("#"+this.value) ); // Call function to fetch image using ajax get_graph(this, myCount, divIsNew); } else { // REMOVE 'graphContainer' DIVS NOT CHECKED // check for div existance if ( $("#"+this.value).length != 0 ) { console.log("DESTROY: #dragMe_"+myCount+", REMOVE: #"+this.value); // DESTROY draggable //$("#dragMe_"+myCount).draggable("destroy"); // remove div $("#"+this.value).remove(); } } // reset counters and other variables myCount++; divIsNew = false; console.log("Complete: "+this.value+", NEXT index"); }); });

  Read the article

• How do I make these inputs relate to each other?

  - by dmanexe

  I have a series of checkbox inputs and corresponding text area inputs to allow specification of quantity. Here's what the two fields look like when the item is static (i.e. only 1): <input type="checkbox" name="measure[checked][]" value="<?=$item->id?>"> <input type="hidden" name="measure[quantity][]" value="1" /> Here's what the input fields look like for all items that have a specifiable quantity: <input type="checkbox" name="measure[checked][]" value="<?=$item->id?>"> <input class="item_mult" value="0" type="text" name="measure[quantity][]" /> This would play nicely, if within the array, it didn't output like this, after collecting it with: $field = $this->input->post('measure',true); Array ( [quantity] => Array ( [0] => 1 [1] => 1 [2] => 1 [3] => 1 [4] => 1 [5] => 1 [6] => 25 [7] => 0 [8] => 0 [9] => 0 [10] => 1 [11] => 1 [12] => 1 [13] => 1 [14] => 1 [15] => 1 [16] => 1 [17] => 1 [18] => 1 [19] => 1 [20] => 1 [21] => 1 [22] => 0 [23] => 0 [24] => 0 [25] => 0 [26] => 0 [27] => 0 [28] => 0 [29] => 0 [30] => 0 [31] => 0 [32] => 0 [33] => 0 [34] => 0 [35] => 0 [36] => 0 [37] => 0 [38] => 0 [39] => 0 [40] => 0 [41] => 1 [42] => 1 [43] => 1 [44] => 1 [45] => 1 [46] => 1 [47] => 1 [48] => 1 [49] => 1 [50] => 1 [51] => 1 [52] => 0 [53] => 0 [54] => 0 ) [checked] => Array ( [0] => 4 [1] => 6 [2] => 13 ) ) I understand what the values in the checked array are, I just do not understand how to relate the first field to the second, later in the program. How do I incorporate the correct code to relate checked items to quantities?

  Read the article

• What broke in this Javascript 1.2 snippet?

  - by Rob Kelley

  A friend has pointed me to his old website and says "the submit form just stopped working a while ago. I'm sure it's something simple." The form asks a child for a certain word from a book, and based on the answer, it should redirect the child to a success page or a failure page. It's using Javascript 1.2, circa 2001. You can see this form in in-action at: http://www.secrethidingplaces.com/login1.html Any idea why it's failing? The HTML does this: <script src="password.js" type="text/javascript" language="JavaScript1.2"> </script> <script type="text/javascript" language="JavaScript1.2"> <!-- function showRightPage () { return window.location.href = "extra.html" ; } function showWrongPage () { return window.location.href = "sorry2.html" ; } //--> </script> and then this: document.write ( '<form name="questionForm" action="javascript:checkAnswer()" method="post">' ) ; ... document.write ( '<input type="text" name="userAnswer" value="" size="90">' ) ; document.write ( '<INPUT TYPE="image" NAME="submit" SRC="stock/btn_send.gif" width="121" height="41" BORDER="0" ALT="submit">' ) ; document.write ( '\</p>' ) ; document.write ( '\</form>' ) ; I'm assuming there's something ugly in CheckAnswer from ./password.js . I can hack the form to bypass that javascript and go straight to the success page: document.write ( '<form name="questionForm" action="extra.html" method="post">' ) ; but I'd like to help my friend get his kids site working again. The CheckAnswer function is below. Is something going wrong in here? function checkAnswer () { currentAnswer = answersArray [ choiceNumber ] ; if (agt.indexOf("msie") != -1) { rawAnswer = document.questionForm.userAnswer.value ; } else { rawAnswer = document.callThis.document.questionForm.userAnswer.value ; } lcAnswer = rawAnswer.toLowerCase ( ) ; includedAnswer = lcAnswer.indexOf ( "currentAnswer" ) ; zadaAnswer = lcAnswer.indexOf ( "zada" ) ; brendanAnswer = lcAnswer.indexOf ( "brendan" ) ; nineAnswer = lcAnswer.indexOf ( "nine" ) ; thirtyAnswer = lcAnswer.indexOf ( "thirty" ) ; if ( choiceNumber == 0 ) { if ( includedAnswer == -1 && zadaAnswer == -1 && brendanAnswer == -1 ) { checked = "wrong" ; } } if ( choiceNumber == 8 ) { if ( includedAnswer == -1 && zadaAnswer == -1 && nineAnswer == -1 ) { checked = "wrong" ; } } if ( choiceNumber == 16 ) { if ( includedAnswer == -1 && zadaAnswer == -1 && thirtyAnswer == -1 ) { checked = "wrong" ; } } if ( choiceNumber != 0 && choiceNumber != 8 && choiceNumber != 16 ) { if ( includedAnswer == -1 && zadaAnswer == -1 ) { checked = "wrong" ; } } if ( checked == "wrong" ) { showWrongPage () ; } else { showRightPage () ; } } Thanks!

  Read the article

• JQuery Checkbox with Textbox Validation

  - by Volrath

  I am using Jorn's validation plugin. I have a a group of checkboxes beside a group of textboxes. The textboxes are disabled by default and will enable when the matching checkbox is checked. At least 1 checkbox has to be checked which is not a problem. However, when I check more than 2 checkboxes only 1 textbox validates. The form still submits even when the second checkbox is empty. $count = 0; while($row = mysql_fetch_array($rs)) { ?> <tr> <td> <label> <input type="checkbox" name="tDays[]" id="tDays<?php echo $count; ?>" value="<?php echo $row['promoDayID'];?>" onClick="enableTxt();" <?php if((isset($arrTDays) && in_array_THours($row['promoDayID'], $arrTDays)) || (!empty($arrSelectedTHours) && in_array_THours($row['promoDayID'], $arrSelectedTHours))) { echo "checked='checked'"; }?> validate="required:true" /> <?php echo $row['promoDay'];?>: </label> </td> <td align="right"> <input type="textbox" size="45" style="font-size:12px" name="tHours[]" id="tHours<?php echo $count; ?>" <?php if(isset($arrTDays) && in_array_THours($row['promoDayID'], $arrTDays)) { echo "value='" .getHours($row['promoDayID'], $arrTDays) ."'"; } elseif (!empty($arrSelectedTHours) && in_array_THours($row['promoDayID'], $arrSelectedTHours)) { echo "value='" .getHours($row['promoDayID'], $arrSelectedTHours). "'"; } else { echo "value='' disabled='disabled'"; }?> class="required" /> <label for="tHours[]" class="error" id="tHourserror<?php echo $count; ?>">Please enter the Trading Hour.</label> </td> </tr> <?php $count++; }//while ?> This is done using javascript: function enableTxt() { for (i = 0; i <= 7; i++) { if (document.getElementById("tDays" + i) != null && document.getElementById("tDays" + i).checked == true) { document.getElementById('tHours' + i).disabled = false; document.getElementById('tHourserror' + i).style.visibility = "visible"; } else if (document.getElementById("tDays" + i) != null) { document.getElementById('tHours' + i).disabled = "disabled"; document.getElementById('tHours' + i).value = ""; document.getElementById('tHourserror' + i).style.visibility = "hidden"; } } } Please kindly advise in detail as to how this problem can be solved. I am fairly weak in JQuery.

  Read the article

• Port forwarding on Fortigate 50B

  - by sindre j

  I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

  Read the article

• CopSSH SFTP -- limit users access to their home directory only

  - by bradvido

  Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

  Read the article

• Can't find disk usage in one directory

  - by Xster

  Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• CopSSH SFTP -- limit users access to their home directory only

  - by bradvido

  Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

  Read the article

• Exchange 2010 Mail Enabled Public Folder Unable to Recieve External (anon) e-mail.

  - by Alex

  Hello All, I am having issues with my "Public Folders" mail enabled folders receiving e-mails from external senders. The folder is setup with three Accepted Domains (names changed for privacy reasons): 1 - domain1.com (primary & Authoritative) 2 - domain2.com (Authoritative) 3 - domain3.com (Authoritative) When someone attempts to send an e-mail to [email protected] from inside the organization, the e-mail is received and placed in the appropriate folder. However, when someone tries to send an e-mail from outside the organization (such as a gmail account), the following error message is received: "Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 Recipient address rejected: User unknown (state 14)." When I try to send an e-mail to the same folder, using the same e-mail address above ([email protected]), but with domain2.com instead of domain3.com, it works as intended (both internal & external). I have checked, double checked, and triple checked my DNS settings comparing those from domain2 & domain3 with them both appearing identical. I have tried recreating the folders in question with the same results. I have also ran Get-PublicFolderClientPermission "\Web Programs\folder" with the following results for user anonymous: RunspaceId : 5ff99653-a8c3-4619-8eeb-abc723dc908b Identity : \Web Programs\folder User : Anonymous AccessRights : {CreateItems} Domain2.com & Domain3.com are duplicates of each other, but only domain2.com works as intended. All other exchange functions are functioning properly. If anyone out there has any suggestions, I would love to hear them. I've just hit a brick wall. Thanks for all your help in advance! --Alex

  Read the article

• PC powers off at random times

  - by Timo Huovinen

  Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

  Read the article

• Enable FTP on OS X 10.8 Mountain Lion Server

  - by Oleg Trakhman

  There is a LAN comprising several mac machines (iMac, Mac Pro, macbook etc.), Airport Express router and Mac Mini Server running OS X Server 10.8 (Mountain Lion Server). I need to share a folder on Mac Mini Server by FTP. What did I try so far: Made special partition for FTP Access, call it "Reports" So shared folder would be "/Volumes/Reports" Gave access every user and group in system, and also enabled guest access. I checked posix acl, which is "rwxrwxrwx", I checked sharing settings in "Preferences.app" and "Server.app" Checked that users have access to FTP service Enabled FTP in Server.app I tried access to shared folder (by FTP): via Cyberduck via Finder via shell: ftp server.local And what I got: $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User ftpuser accepted, provide password. Password: 530 User ftpuser may not use FTP. and $ ftp [email protected] Trying 10.0.2.2... Connected to server.local. 220 10.0.2.2 FTP server (tnftpd 20100324+GSSAPI) ready. 331 User admin accepted, provide password. Password: 530 User admin denied by SACL. ftp: Login failed ftp> (admin is administrator account , ftpuser is special user account made to access ftp) What I'm doing wrong? Getting really tired of this...

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• PC can't detect second RAM installed

  - by kulwinder

  I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

  Read the article

• Troubleshooting wireless client-bridged networks between two DD-WRT routers?

  - by KronoS

  I recently purchased a Buffalo N600 wireless router which came with DD-WRT pre-installed. I want to take my old wireless router a Linksys WRT54GL, also with DD-WRT pre-installed, and use it as a wireless bridge for my HTPC and Blu-Ray Player in the other room. I other words, I'm trying to connect to WIRED networks via the wireless on the routers. I followed eactly the instruction from DD-WRT's manual for 'Client Bridged' however I'm still not able to connect to two routers correctly, when the encryption is enabled (WPA2-Personal Mixed) however I am able to connect the two routers when there is NO encryption. I've checked, double checked, and triple checked that EVERYTHING is the same on BOTH routers: Routers 1 & 2 Encryption: WPA2-Personal Mixed Wireless Mode: G-Only Wireless Channel: 6 Subnet Mask: 255.255.255.0 Subnet: 192.168.1.0/254 SSID: Krono$ Primary Router #1 (Buffalo N600) IP Address: 192.168.1.1 Firewall: Enables w/ defaults DCHP: Enabled as DHCP Server Secondary Router #2 (Linksys WRT54GL) IP Address: 192.168.1.2 Firewall: Disabled as per DD-WRT instructions I'm looking for any configurations that I may have missed, or settings that may need to happen in order for this work.

  Read the article

• Why won't my computer go to sleep automatically?

  - by Django Reinhardt

  Windows 8 is set to sleep after 30 mins, and it used to work, but recently it's started refusing to sleep. (I can still manually ask it to go to sleep without any issue.) I was having issues a while ago, but it was with my network adapter. That's since been disabled, so it's definitely not that: I've checked to see what devices are able to wake up my machine, but it only appears to be my mouse: Which is odd, because I haven't recently changed my mouse, and more confusing still: The monitor does go to sleep just fine. If it was actually the mouse keeping my system awake, I'm pretty sure the monitor wouldn't go to sleep. I've checked my Wake Timers, and nothing: I've also checked my existing requests... UPDATE: I found something. What to do with it, I don't know... Note: Even when /requests says that there's "NONE" under every category, my machine still won't sleep(!). In short: How can I tell what's preventing my computer from Sleeping? UPDATE: Ok, so I now have a few more pieces of the puzzle. I came back to my computer and it was ASLEEP! Lawks! It seems that the only times it doesn't sleep is if VLC Player is open, even if a video isn't actually playing. UPDATE UPDATE: Ok, so it won't sleep sometimes when VLC Player ISN'T running, either. Bah!

  Read the article

• Torrent upload ratio not updated on Synology DS212+

  - by user179271

  I have a Synology DS212+ NAS running DSM 4.2-3211 (current version). I use it for several purposes including torrent download using Download Station and a tracker that needs authentication. My problem is that my download/upload ratio isn't updated, so it constantly falls down. My NAS is behind a router, and I configured the NAT to forward ports 6890 to 6999 to the internal IP address of the NAS. Here are the Download Station settings : TCP port : 6990, Sharing ratio : 900%, Sharing time : infinite, max download speed : 0 (no limit), max upload speed : 0 (no limit), BT protocol encryption : checked, max numbers of peers allowed by torrent file : 4000, DHT : checked, with port 6889. When the DHT option is not checked, the NAS doesn't upload any files. I don't know what is this option for. Can someone help me to solve this problem ? Did I miss any step, or does it come from the NAT ? How is the authentication managed by Dowload Station ? (Sorry for my english) Thanks.

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• Get the Windows Scheduler's Location Or Code?

  - by Ram

  Today i got a task to find the scheduler that is running once in a month, actually I have to change its running time period to once a week. I have searched for it in the Windows scheduled tasks, but i didn't find it. It is sending a mail containing a link. Now i am not confused about this where else can i find it. As the place i know where the scheduler can be, has already been checked by me. Can someone suggest me where else can i search for this scheduler? As per the previous developer's comment "It is a normal Windows method of scheduling tasks" UPDATE Actually the task is running after a month periodically. As per my knowledge it could be a "Windows Task Schedule" or "Windows Service" created by the old developer. Now as the previous developer is not available and i do not have any documentation.. i need to change the time period from month to weakly. I have checked in the "Task Schedules" on the server and checked the services running ob the server and was unable to find the "Scheduler". now i have two questions: is there any other approach by using that i can schedule an automated email periodically. any idea to find this.

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >